[ 0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26 [ 0.000000] Linux version 5.0.0-29-generic (buildd@lcy01-amd64-030) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1)) #31-Ubuntu SMP Thu Sep 12 13:05:32 UTC 2019 (Ubuntu 5.0.0-29.31-generic 5.0.21) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.0.0-29-generic root=/dev/mapper/internal-root ro quiet splash resume=/dev/mapper/internal-swap vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bab7efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bab7f000-0x00000000bbe7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbe7f000-0x00000000bbf7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf7f000-0x00000000bbffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbfff000-0x00000000bbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP ProBook 640 G1/2101, BIOS L78 Ver. 01.43 01/25/2018 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.108 MHz processor [ 0.001905] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001907] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001913] last_pfn = 0x43ee00 max_arch_pfn = 0x400000000 [ 0.001917] MTRR default type: uncachable [ 0.001917] MTRR fixed ranges enabled: [ 0.001918] 00000-9FFFF write-back [ 0.001919] A0000-BFFFF uncachable [ 0.001920] C0000-FFFFF write-protect [ 0.001921] MTRR variable ranges enabled: [ 0.001922] 0 base 00FF800000 mask 7FFF800000 write-protect [ 0.001923] 1 base 0000000000 mask 7F80000000 write-back [ 0.001924] 2 base 0080000000 mask 7FC0000000 write-back [ 0.001924] 3 base 00BE000000 mask 7FFE000000 uncachable [ 0.001925] 4 base 00BD000000 mask 7FFF000000 uncachable [ 0.001926] 5 base 0100000000 mask 7F00000000 write-back [ 0.001926] 6 base 0200000000 mask 7E00000000 write-back [ 0.001927] 7 base 0400000000 mask 7FC0000000 write-back [ 0.001928] 8 base 043F000000 mask 7FFF000000 uncachable [ 0.001929] 9 base 043EE00000 mask 7FFFE00000 uncachable [ 0.002710] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002860] last_pfn = 0xbc000 max_arch_pfn = 0x400000000 [ 0.011118] check: Scanning 1 areas for low memory corruption [ 0.011122] Using GB pages for direct mapping [ 0.011124] BRK [0x24b001000, 0x24b001fff] PGTABLE [ 0.011126] BRK [0x24b002000, 0x24b002fff] PGTABLE [ 0.011127] BRK [0x24b003000, 0x24b003fff] PGTABLE [ 0.011158] BRK [0x24b004000, 0x24b004fff] PGTABLE [ 0.011160] BRK [0x24b005000, 0x24b005fff] PGTABLE [ 0.011279] BRK [0x24b006000, 0x24b006fff] PGTABLE [ 0.011305] BRK [0x24b007000, 0x24b007fff] PGTABLE [ 0.011333] BRK [0x24b008000, 0x24b008fff] PGTABLE [ 0.011367] RAMDISK: [mem 0x30069000-0x3402bfff] [ 0.011375] ACPI: Early table checksum verification disabled [ 0.011422] ACPI: RSDP 0x00000000000F2FE0 000024 (v02 HPQOEM) [ 0.011426] ACPI: XSDT 0x00000000BBFFE120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.011431] ACPI: FACP 0x00000000BBFFC000 00010C (v05 HPQOEM 2101 00000001 HP 00000001) [ 0.011436] ACPI: DSDT 0x00000000BBFD1000 0250F7 (v02 HPQOEM 2101 00000001 INTL 20110112) [ 0.011438] ACPI: FACS 0x00000000BBDE4000 000040 [ 0.011440] ACPI: FACS 0x00000000BBDE4000 000040 [ 0.011442] ACPI: HPET 0x00000000BBFFB000 000038 (v01 HPQOEM 2101 00000001 HP 00000001) [ 0.011445] ACPI: APIC 0x00000000BBFFA000 0000BC (v01 HPQOEM 2101 00000001 HP 00000001) [ 0.011447] ACPI: MCFG 0x00000000BBFF9000 00003C (v01 HPQOEM 2101 00000001 HP 00000001) [ 0.011450] ACPI: TCPA 0x00000000BBFF7000 000032 (v02 HPQOEM 2101 00000000 HP 00000001) [ 0.011452] ACPI: SSDT 0x00000000BBFCE000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.011455] ACPI: SSDT 0x00000000BBFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.011457] ACPI: SLIC 0x00000000BBFCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.011460] ACPI: MSDM 0x00000000BBFCB000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001) [ 0.011462] ACPI: FPDT 0x00000000BBFCA000 000044 (v01 HPQOEM 2101 00000001 HP 00000001) [ 0.011464] ACPI: BGRT 0x00000000BBFC9000 000038 (v00 HPQOEM 2101 00000001 HP 00000001) [ 0.011467] ACPI: SSDT 0x00000000BBFC5000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.011469] ACPI: SSDT 0x00000000BBFC4000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.011471] ACPI: SSDT 0x00000000BBFC3000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112) [ 0.011474] ACPI: SSDT 0x00000000BBFC2000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112) [ 0.011476] ACPI: ASF! 0x00000000BBFF8000 0000A5 (v32 HPQOEM 2101 00000001 HP 00000001) [ 0.011484] ACPI: Local APIC address 0xfee00000 [ 0.011571] No NUMA configuration found [ 0.011571] Faking a node at [mem 0x0000000000000000-0x000000043edfffff] [ 0.011581] NODE_DATA(0) allocated [mem 0x43edd5000-0x43edfffff] [ 0.011791] Zone ranges: [ 0.011792] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011793] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011794] Normal [mem 0x0000000100000000-0x000000043edfffff] [ 0.011795] Device empty [ 0.011796] Movable zone start for each node [ 0.011799] Early memory node ranges [ 0.011800] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.011801] node 0: [mem 0x0000000000100000-0x00000000bab7efff] [ 0.011801] node 0: [mem 0x00000000bbfff000-0x00000000bbffffff] [ 0.011802] node 0: [mem 0x0000000100000000-0x000000043edfffff] [ 0.012138] Zeroed struct page in unavailable ranges: 21732 pages [ 0.012139] Initmem setup node 0 [mem 0x0000000000001000-0x000000043edfffff] [ 0.012140] On node 0 totalpages: 4167964 [ 0.012141] DMA zone: 64 pages used for memmap [ 0.012142] DMA zone: 21 pages reserved [ 0.012143] DMA zone: 3996 pages, LIFO batch:0 [ 0.012236] DMA32 zone: 11886 pages used for memmap [ 0.012237] DMA32 zone: 760704 pages, LIFO batch:63 [ 0.030779] Normal zone: 53176 pages used for memmap [ 0.030780] Normal zone: 3403264 pages, LIFO batch:63 [ 0.106587] Reserving Intel graphics memory at [mem 0xbd200000-0xbf1fffff] [ 0.106666] ACPI: PM-Timer IO Port: 0x1808 [ 0.106668] ACPI: Local APIC address 0xfee00000 [ 0.106674] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.106675] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.106675] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.106676] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.106676] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.106677] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.106677] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.106678] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.106689] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.106691] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.106692] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.106693] ACPI: IRQ0 used by override. [ 0.106694] ACPI: IRQ9 used by override. [ 0.106696] Using ACPI (MADT) for SMP configuration information [ 0.106698] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.106702] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.106716] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.106718] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.106719] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.106719] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.106720] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.106721] PM: Registered nosave memory: [mem 0xbab7f000-0xbbe7efff] [ 0.106721] PM: Registered nosave memory: [mem 0xbbe7f000-0xbbf7efff] [ 0.106722] PM: Registered nosave memory: [mem 0xbbf7f000-0xbbffefff] [ 0.106723] PM: Registered nosave memory: [mem 0xbc000000-0xbf1fffff] [ 0.106724] PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff] [ 0.106724] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.106725] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.106725] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.106726] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.106726] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.106727] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.106727] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.106728] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.106728] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.106729] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.106729] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.106730] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.106730] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.106732] [mem 0xbf200000-0xdfffffff] available for PCI devices [ 0.106733] Booting paravirtualized kernel on bare hardware [ 0.106735] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.106745] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0 [ 0.106750] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.106969] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144 [ 0.106974] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.106975] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.106997] Built 1 zonelists, mobility grouping on. Total pages: 4102817 [ 0.106997] Policy zone: Normal [ 0.106999] Kernel command line: BOOT_IMAGE=/vmlinuz-5.0.0-29-generic root=/dev/mapper/internal-root ro quiet splash resume=/dev/mapper/internal-swap vt.handoff=1 [ 0.110547] Calgary: detecting Calgary via BIOS EBDA area [ 0.110549] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.150260] Memory: 16243700K/16671856K available (14339K kernel code, 2335K rwdata, 4304K rodata, 2576K init, 5204K bss, 428156K reserved, 0K cma-reserved) [ 0.150388] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.150393] Kernel/User page tables isolation: enabled [ 0.150408] ftrace: allocating 41580 entries in 163 pages [ 0.167178] rcu: Hierarchical RCU implementation. [ 0.167180] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.167180] Tasks RCU enabled. [ 0.167181] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.167182] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.169954] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.170154] vt handoff: transparent VT on vt#1 [ 0.170159] Console: colour dummy device 80x25 [ 0.170163] printk: console [tty0] enabled [ 0.170178] ACPI: Core revision 20181213 [ 0.170455] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.170464] hpet clockevent registered [ 0.170469] APIC: Switch to symmetric I/O mode setup [ 0.170868] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.190470] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f37bd2877, max_idle_ns: 440795255191 ns [ 0.190481] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.21 BogoMIPS (lpj=9976432) [ 0.190483] pid_max: default: 32768 minimum: 301 [ 0.190515] LSM: Security Framework initializing [ 0.190525] Yama: becoming mindful. [ 0.190543] AppArmor: AppArmor initialized [ 0.192807] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.193963] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.194011] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.194049] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.194265] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.194266] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.194280] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.194290] process: using mwait in idle threads [ 0.194292] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.194293] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.194294] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.194295] Spectre V2 : Mitigation: Full generic retpoline [ 0.194296] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.194296] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.194303] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.194303] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.194304] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.194328] MDS: Mitigation: Clear CPU buffers [ 0.194509] Freeing SMP alternatives memory: 36K [ 0.198541] TSC deadline timer enabled [ 0.198544] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.198632] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.198678] ... version: 3 [ 0.198678] ... bit width: 48 [ 0.198678] ... generic registers: 4 [ 0.198679] ... value mask: 0000ffffffffffff [ 0.198680] ... max period: 00007fffffffffff [ 0.198680] ... fixed-purpose events: 3 [ 0.198681] ... event mask: 000000070000000f [ 0.198713] rcu: Hierarchical SRCU implementation. [ 0.199301] random: crng done (trusting CPU's manufacturer) [ 0.199820] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.199895] smp: Bringing up secondary CPUs ... [ 0.199973] x86: Booting SMP configuration: [ 0.199974] .... node #0, CPUs: #1 [ 0.200867] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.200867] #2 #3 [ 0.203242] smp: Brought up 1 node, 4 CPUs [ 0.203242] smpboot: Max logical packages: 2 [ 0.203242] smpboot: Total of 4 processors activated (19952.86 BogoMIPS) [ 0.206854] devtmpfs: initialized [ 0.206854] x86/mm: Memory block size: 128MB [ 0.207576] PM: Registering ACPI NVS region [mem 0xbbe7f000-0xbbf7efff] (1048576 bytes) [ 0.207576] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.207576] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.207576] pinctrl core: initialized pinctrl subsystem [ 0.207576] RTC time: 22:14:34, date: 2019-09-27 [ 0.207576] NET: Registered protocol family 16 [ 0.207576] audit: initializing netlink subsys (disabled) [ 0.207576] audit: type=2000 audit(1569622473.036:1): state=initialized audit_enabled=0 res=1 [ 0.207576] EISA bus registered [ 0.207576] cpuidle: using governor ladder [ 0.207576] cpuidle: using governor menu [ 0.207576] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.207576] ACPI: bus type PCI registered [ 0.207576] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.207576] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.207576] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.207576] PCI: Using configuration type 1 for base access [ 0.207576] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.207662] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.207662] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.207662] ACPI: Added _OSI(Module Device) [ 0.207662] ACPI: Added _OSI(Processor Device) [ 0.207662] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.207662] ACPI: Added _OSI(Processor Aggregator Device) [ 0.207662] ACPI: Added _OSI(Linux-Dell-Video) [ 0.207662] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.207662] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.227638] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.229563] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.235202] ACPI: Dynamic OEM Table Load: [ 0.235209] ACPI: SSDT 0xFFFF8F4AEC71E000 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.235809] ACPI: Dynamic OEM Table Load: [ 0.235814] ACPI: SSDT 0xFFFF8F4AEC716000 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.236452] ACPI: Dynamic OEM Table Load: [ 0.236456] ACPI: SSDT 0xFFFF8F4AEC5D3C00 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.237649] ACPI: EC: EC started [ 0.237650] ACPI: EC: interrupt blocked [ 1.790691] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 1.790693] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.790694] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 1.790694] ACPI: Interpreter enabled [ 1.790722] ACPI: (supports S0 S3 S4 S5) [ 1.790723] ACPI: Using IOAPIC for interrupt routing [ 1.790744] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.791071] ACPI: Enabled 7 GPEs in block 00 to 3F [ 1.793107] ACPI: Power Resource [APPR] (off) [ 1.796122] ACPI: Power Resource [COMP] (off) [ 1.796693] ACPI: Power Resource [LPP] (on) [ 1.800573] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.800578] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.801920] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 1.803626] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.803627] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.804316] PCI host bridge to bus 0000:00 [ 1.804318] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.804319] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.804320] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.804321] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window] [ 1.804322] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window] [ 1.804323] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window] [ 1.804324] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 1.804325] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.804332] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 1.804465] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 1.804476] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 1.804481] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.804485] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 1.804629] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 1.804638] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit] [ 1.804789] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 1.804808] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit] [ 1.804863] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.804979] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 1.804999] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073900f 64bit] [ 1.805066] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.805183] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 1.805201] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff] [ 1.805208] pci 0000:00:19.0: reg 0x14: [mem 0xd073f000-0xd073ffff] [ 1.805215] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 1.805276] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.805392] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 1.805412] pci 0000:00:1a.0: reg 0x10: [mem 0xd073e000-0xd073e3ff] [ 1.805498] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.805619] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 1.805637] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit] [ 1.805709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.805823] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 1.805901] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.806077] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400 [ 1.806157] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 1.806328] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400 [ 1.806482] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.806652] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 1.806672] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff] [ 1.806759] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.806881] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100 [ 1.807097] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 1.807113] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 1.807120] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 1.807127] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 1.807134] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 1.807140] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 1.807147] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff] [ 1.807187] pci 0000:00:1f.2: PME# supported from D3hot [ 1.807297] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 1.807314] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit] [ 1.807333] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f] [ 1.807498] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.807503] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff] [ 1.807582] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000 [ 1.807662] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit] [ 1.807936] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.808128] pci 0000:00:1c.6: PCI bridge to [bus 02] [ 1.808133] pci 0000:00:1c.6: bridge window [mem 0xd0500000-0xd05fffff] [ 1.808230] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000 [ 1.808330] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff] [ 1.808642] pci 0000:03:00.0: supports D1 D2 [ 1.808643] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.808849] pci 0000:00:1c.7: PCI bridge to [bus 03] [ 1.808853] pci 0000:00:1c.7: bridge window [mem 0xd0400000-0xd04fffff] [ 1.810054] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.810116] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.810174] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.810233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.810291] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.810349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.810407] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.810468] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.810875] ACPI: EC: interrupt unblocked [ 1.810891] ACPI: EC: event unblocked [ 1.810897] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.810899] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 1.810967] SCSI subsystem initialized [ 1.810967] libata version 3.00 loaded. [ 1.810967] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.810967] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.810967] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.810967] vgaarb: loaded [ 1.810967] ACPI: bus type USB registered [ 1.810967] usbcore: registered new interface driver usbfs [ 1.810967] usbcore: registered new interface driver hub [ 1.810967] usbcore: registered new device driver usb [ 1.810967] pps_core: LinuxPPS API ver. 1 registered [ 1.810967] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.810967] PTP clock support registered [ 1.810967] EDAC MC: Ver: 3.0.0 [ 1.810967] PCI: Using ACPI for IRQ routing [ 1.817033] PCI: pci_cache_line_size set to 64 bytes [ 1.817104] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 1.817105] e820: reserve RAM buffer [mem 0xbab7f000-0xbbffffff] [ 1.817106] e820: reserve RAM buffer [mem 0x43ee00000-0x43fffffff] [ 1.817194] NetLabel: Initializing [ 1.817194] NetLabel: domain hash size = 128 [ 1.817195] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.817207] NetLabel: unlabeled traffic allowed by default [ 1.817220] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.817220] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.819493] clocksource: Switched to clocksource tsc-early [ 1.829354] VFS: Disk quotas dquot_6.6.0 [ 1.829371] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.829475] AppArmor: AppArmor Filesystem Enabled [ 1.829501] pnp: PnP ACPI init [ 1.829798] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.829800] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 1.829801] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.829802] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.829803] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 1.829804] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.829805] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.829806] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.829808] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.829809] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved [ 1.829814] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.830046] system 00:01: [io 0x0200-0x027f] has been reserved [ 1.830047] system 00:01: [io 0xffff] has been reserved [ 1.830048] system 00:01: [io 0xffff] has been reserved [ 1.830049] system 00:01: [io 0xffff] has been reserved [ 1.830050] system 00:01: [io 0x1800-0x18fe] has been reserved [ 1.830051] system 00:01: [io 0xef80-0xef9f] has been reserved [ 1.830055] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.830104] system 00:02: [io 0x0800-0x087f] has been reserved [ 1.830107] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.830128] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.830695] pnp 00:04: [dma 0 disabled] [ 1.830763] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) [ 1.830781] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 1.830799] pnp 00:06: Plug and Play ACPI device, IDs SYN3002 SYN0100 SYN0002 PNP0f13 (active) [ 1.831172] system 00:07: [mem 0x20000000-0x201fffff] could not be reserved [ 1.831174] system 00:07: [mem 0x40004000-0x40004fff] could not be reserved [ 1.831177] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.831445] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 1.831464] pnp: PnP ACPI: found 9 devices [ 1.837128] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.837153] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 1.837155] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 1.837164] pci 0000:00:1c.7: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.837166] pci 0000:00:1c.7: BAR 13: assigned [io 0x2000-0x2fff] [ 1.837168] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.837173] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff] [ 1.837180] pci 0000:00:1c.6: PCI bridge to [bus 02] [ 1.837184] pci 0000:00:1c.6: bridge window [mem 0xd0500000-0xd05fffff] [ 1.837191] pci 0000:00:1c.7: PCI bridge to [bus 03] [ 1.837193] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff] [ 1.837197] pci 0000:00:1c.7: bridge window [mem 0xd0400000-0xd04fffff] [ 1.837201] pci 0000:00:1c.7: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.837207] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.837208] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.837209] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.837210] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window] [ 1.837211] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window] [ 1.837212] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window] [ 1.837212] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window] [ 1.837214] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.837215] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff] [ 1.837216] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 1.837217] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff] [ 1.837218] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.837333] NET: Registered protocol family 2 [ 1.837504] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 1.837551] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.837697] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.837805] TCP: Hash tables configured (established 131072 bind 65536) [ 1.837841] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.837878] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.837966] NET: Registered protocol family 1 [ 1.837970] NET: Registered protocol family 44 [ 1.837978] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.837987] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 1.838850] PCI: CLS 64 bytes, default 64 [ 1.838882] Unpacking initramfs... [ 2.717185] Freeing initrd memory: 65292K [ 2.717187] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.717189] software IO TLB: mapped [mem 0xb6b7f000-0xbab7f000] (64MB) [ 2.717390] check: Scanning for low memory corruption every 60 seconds [ 2.719113] Initialise system trusted keyrings [ 2.719121] Key type blacklist registered [ 2.719151] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 2.720351] zbud: loaded [ 2.720736] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.720911] fuse init (API version 7.28) [ 2.758367] Key type asymmetric registered [ 2.758368] Asymmetric key parser 'x509' registered [ 2.758379] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 2.758420] io scheduler mq-deadline registered [ 2.758800] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 [ 2.759036] pcieport 0000:00:1c.6: Signaling PME with IRQ 25 [ 2.759251] pcieport 0000:00:1c.7: Signaling PME with IRQ 26 [ 2.759271] pciehp 0000:00:1c.7:pcie004: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 2.759374] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.759427] vesafb: mode is 1600x900x32, linelength=6400, pages=0 [ 2.759428] vesafb: scrolling: redraw [ 2.759429] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.759440] vesafb: framebuffer at 0xc0000000, mapped to 0x000000002d7565f0, using 5632k, total 5632k [ 2.759523] Console: switching to colour frame buffer device 200x56 [ 2.759541] fb0: VESA VGA frame buffer device [ 2.759552] intel_idle: MWAIT substates: 0x42120 [ 2.759553] intel_idle: v0.4.1 model 0x3C [ 2.759739] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.759949] ACPI: AC Adapter [AC] (on-line) [ 2.760009] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 2.760016] ACPI: Sleep Button [SLPB] [ 2.760042] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 2.760046] ACPI: Lid Switch [LID] [ 2.760073] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.760086] ACPI: Power Button [PWRF] [ 2.786233] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.786235] ACPI: Thermal Zone [CPUZ] (72 C) [ 2.810644] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.810646] ACPI: Thermal Zone [GFXZ] (0 C) [ 2.825840] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.825843] ACPI: Thermal Zone [EXTZ] (34 C) [ 2.841079] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.841081] ACPI: Thermal Zone [LOCZ] (49 C) [ 2.856365] thermal LNXTHERM:04: registered as thermal_zone4 [ 2.856367] ACPI: Thermal Zone [BATZ] (25 C) [ 2.856773] thermal LNXTHERM:05: registered as thermal_zone5 [ 2.856774] ACPI: Thermal Zone [PCHZ] (114 C) [ 2.856959] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.858690] Linux agpgart interface v0.103 [ 2.862431] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 2.878012] battery: ACPI: Battery Slot [BAT0] (battery present) [ 2.888572] loop: module loaded [ 2.888768] libphy: Fixed MDIO Bus: probed [ 2.888769] tun: Universal TUN/TAP device driver, 1.6 [ 2.888800] PPP generic driver version 2.4.2 [ 2.888840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.888842] ehci-pci: EHCI PCI platform driver [ 2.889052] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.889057] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.889069] ehci-pci 0000:00:1a.0: debug port 2 [ 2.892986] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.892997] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd073e000 [ 2.906533] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.906590] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 2.906592] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.906593] usb usb1: Product: EHCI Host Controller [ 2.906594] usb usb1: Manufacturer: Linux 5.0.0-29-generic ehci_hcd [ 2.906594] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.906795] hub 1-0:1.0: USB hub found [ 2.906799] hub 1-0:1.0: 3 ports detected [ 2.907146] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.907150] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.907161] ehci-pci 0000:00:1d.0: debug port 2 [ 2.911052] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.911064] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000 [ 2.926533] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.926588] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 2.926589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.926590] usb usb2: Product: EHCI Host Controller [ 2.926591] usb usb2: Manufacturer: Linux 5.0.0-29-generic ehci_hcd [ 2.926592] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.926791] hub 2-0:1.0: USB hub found [ 2.926796] hub 2-0:1.0: 3 ports detected [ 2.926982] ehci-platform: EHCI generic platform driver [ 2.926998] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.927001] ohci-pci: OHCI PCI platform driver [ 2.927010] ohci-platform: OHCI generic platform driver [ 2.927017] uhci_hcd: USB Universal Host Controller Interface driver [ 2.927206] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.927210] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.928257] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 2.928261] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.928416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 2.928417] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.928418] usb usb3: Product: xHCI Host Controller [ 2.928419] usb usb3: Manufacturer: Linux 5.0.0-29-generic xhci-hcd [ 2.928419] usb usb3: SerialNumber: 0000:00:14.0 [ 2.928585] hub 3-0:1.0: USB hub found [ 2.928601] hub 3-0:1.0: 15 ports detected [ 2.929343] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.929347] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.929349] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.929379] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 [ 2.929380] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.929381] usb usb4: Product: xHCI Host Controller [ 2.929382] usb usb4: Manufacturer: Linux 5.0.0-29-generic xhci-hcd [ 2.929383] usb usb4: SerialNumber: 0000:00:14.0 [ 2.929544] hub 4-0:1.0: USB hub found [ 2.929555] hub 4-0:1.0: 6 ports detected [ 2.929864] usb: port power management may be unreliable [ 2.929974] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.931194] i8042: Detected active multiplexing controller, rev 1.1 [ 2.931839] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.931843] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.931864] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.931879] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.931893] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.932136] mousedev: PS/2 mouse device common for all mice [ 2.932330] rtc_cmos 00:03: RTC can wake from S4 [ 2.932468] rtc_cmos 00:03: registered as rtc0 [ 2.932480] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.932486] i2c /dev entries driver [ 2.932558] device-mapper: uevent: version 1.0.3 [ 2.932600] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 2.932617] platform eisa.0: Probing EISA bus 0 [ 2.932618] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.932619] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.932620] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.932621] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.932622] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.932622] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.932623] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.932624] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.932625] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.932626] platform eisa.0: EISA: Detected 0 cards [ 2.932630] intel_pstate: Intel P-state driver initializing [ 2.932741] ledtrig-cpu: registered to indicate activity on CPUs [ 2.932934] NET: Registered protocol family 10 [ 2.938088] Segment Routing with IPv6 [ 2.938114] NET: Registered protocol family 17 [ 2.938162] Key type dns_resolver registered [ 2.938341] mce: Using 7 MCE banks [ 2.938352] RAS: Correctable Errors collector initialized. [ 2.938378] microcode: sig=0x306c3, pf=0x10, revision=0x27 [ 2.938409] microcode: Microcode Update Driver: v2.2. [ 2.938416] sched_clock: Marking stable (2938070549, 335674)->(2942126770, -3720547) [ 2.938559] registered taskstats version 1 [ 2.938567] Loading compiled-in X.509 certificates [ 2.939930] Loaded X.509 cert 'Build time autogenerated kernel key: 6e89d8a3d3920a6f950c788ca6fb1453f5bbea64' [ 2.939946] zswap: loaded using pool lzo/zbud [ 2.944757] Key type big_key registered [ 2.944760] Key type trusted registered [ 2.947095] Key type encrypted registered [ 2.947098] AppArmor: AppArmor sha1 policy hashing enabled [ 2.947112] ima: Allocated hash algorithm: sha1 [ 2.956842] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.989193] No architecture policies found [ 2.989228] evm: Initialising EVM extended attributes: [ 2.989230] evm: security.selinux [ 2.989232] evm: security.SMACK64 [ 2.989233] evm: security.SMACK64EXEC [ 2.989234] evm: security.SMACK64TRANSMUTE [ 2.989235] evm: security.SMACK64MMAP [ 2.989237] evm: security.apparmor [ 2.989238] evm: security.ima [ 2.989239] evm: security.capability [ 2.989242] evm: HMAC attrs: 0x1 [ 2.990745] Magic number: 3:551:250 [ 2.990876] memory memory124: hash matches [ 2.990993] rtc_cmos 00:03: setting system clock to 2019-09-27T22:14:36 UTC (1569622476) [ 2.994446] Freeing unused decrypted memory: 2040K [ 2.995578] Freeing unused kernel image memory: 2576K [ 3.006585] Write protecting the kernel read-only data: 22528k [ 3.007932] Freeing unused kernel image memory: 2016K [ 3.008783] Freeing unused kernel image memory: 1840K [ 3.041394] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.041397] x86/mm: Checking user space page tables [ 3.073045] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.073056] Run /init as init process [ 3.242528] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.262521] usb 3-5: new full-speed USB device number 2 using xhci_hcd [ 3.262544] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.346447] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20181213/utaddress-213) [ 3.346467] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.346488] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20181213/utaddress-213) [ 3.346503] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.346507] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20181213/utaddress-213) [ 3.346521] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20181213/utaddress-213) [ 3.346534] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.346537] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20181213/utaddress-213) [ 3.346551] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20181213/utaddress-213) [ 3.346564] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20181213/utaddress-213) [ 3.346577] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20181213/utaddress-213) [ 3.346590] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.346592] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.356579] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.356582] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.357509] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.364921] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 3.364973] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.370416] ahci 0000:00:1f.2: version 3.0 [ 3.371368] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.371432] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x37 impl SATA mode [ 3.371439] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 3.398834] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 3.398842] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.399306] hub 1-1:1.0: USB hub found [ 3.399605] hub 1-1:1.0: 6 ports detected [ 3.412563] usb 3-5: New USB device found, idVendor=138a, idProduct=003f, bcdDevice= 1.04 [ 3.412579] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.412584] usb 3-5: SerialNumber: 0020340b8c97 [ 3.416770] cryptd: max_cpu_qlen set to 1000 [ 3.423155] scsi host0: ahci [ 3.426612] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 3.426620] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.426818] scsi host1: ahci [ 3.427095] hub 2-1:1.0: USB hub found [ 3.427213] hub 2-1:1.0: 8 ports detected [ 3.429796] scsi host2: ahci [ 3.450984] scsi host3: ahci [ 3.453745] scsi host4: ahci [ 3.455712] scsi host5: ahci [ 3.455997] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 30 [ 3.456003] ata2: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c180 irq 30 [ 3.456009] ata3: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c200 irq 30 [ 3.456013] ata4: DUMMY [ 3.456018] ata5: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c300 irq 30 [ 3.456023] ata6: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c380 irq 30 [ 3.456449] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 3.484359] AVX2 version of gcm_enc/dec engaged. [ 3.484363] AES CTR mode by8 optimization enabled [ 3.531066] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 30:8d:99:bc:6d:8a [ 3.531074] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.531152] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 3.537387] VFIO - User Level meta-driver version: 0.3 [ 3.541589] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 3.542521] usb 3-12: new full-speed USB device number 3 using xhci_hcd [ 3.632909] checking generic (c0000000 580000) vs hw (c0000000 10000000) [ 3.632913] fb0: switching to inteldrmfb from VESA VGA [ 3.632957] Console: switching to colour dummy device 80x25 [ 3.633175] [drm] Replacing VGA console driver [ 3.635410] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.635412] [drm] Driver supports precise vblank timestamp query. [ 3.636233] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.657355] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0 [ 3.664584] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.674263] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 3.690980] fbcon: inteldrmfb (fb0) is primary device [ 3.691110] Console: switching to colour frame buffer device 200x56 [ 3.691176] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.691463] usb 3-12: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 [ 3.691468] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.718546] tsc: Refined TSC clocksource calibration: 2494.223 MHz [ 3.718564] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e8602d1, max_idle_ns: 440795241926 ns [ 3.718598] clocksource: Switched to clocksource tsc [ 3.773657] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.783283] ata1.00: ATA-9: HP SSD S700 500GB, R0522A1, max UDMA/133 [ 3.783288] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.798225] ata1.00: configured for UDMA/133 [ 3.808771] scsi 0:0:0:0: Direct-Access ATA HP SSD S700 500G 2A1 PQ: 0 ANSI: 5 [ 3.809423] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.809429] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.809439] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.809457] sd 0:0:0:0: [sda] Write Protect is off [ 3.809462] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.809505] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.810395] sda: sda1 sda2 sda3 sda4 [ 3.811673] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.126708] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.129770] ata2.00: ATAPI: hp DVDRW GUB0N, UB00, max UDMA/133 [ 4.134632] ata2.00: configured for UDMA/133 [ 4.148652] scsi 1:0:0:0: CD-ROM hp DVDRW GUB0N UB00 PQ: 0 ANSI: 5 [ 4.212413] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.212418] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.213041] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.213213] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.375033] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9 [ 4.530688] ata3: SATA link down (SStatus 0 SControl 300) [ 4.846787] ata5: SATA link down (SStatus 0 SControl 300) [ 5.144748] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [ 5.162395] ata6: SATA link down (SStatus 0 SControl 300) [ 5.180256] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [ 5.180271] psmouse serio3: synaptics: Your touchpad (PNP: SYN3002 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 5.238572] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2758, fw id: 1530444 [ 5.276836] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11 [ 8.538531] NET: Registered protocol family 38 [ 12.873743] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 12.873744] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 12.873746] PM: Marking nosave pages: [mem 0xbab7f000-0xbbffefff] [ 12.873806] PM: Marking nosave pages: [mem 0xbc000000-0xffffffff] [ 12.874411] PM: Basic memory bitmaps created [ 12.875118] PM: Basic memory bitmaps freed [ 12.933315] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 13.149487] systemd[1]: Inserted module 'autofs4' [ 13.167436] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 13.186623] systemd[1]: Detected architecture x86-64. [ 13.188820] systemd[1]: Set hostname to . [ 13.292385] systemd[1]: /lib/systemd/system/usbguard.service:7: PIDFile= references path below legacy directory /var/run/, updating /var/run/usbguard.pid → /run/usbguard.pid; please update the unit file accordingly. [ 13.357753] systemd[1]: /lib/systemd/system/spice-vdagentd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/spice-vdagentd/spice-vdagentd.pid → /run/spice-vdagentd/spice-vdagentd.pid; please update the unit file accordingly. [ 13.361476] systemd[1]: Reached target Remote File Systems. [ 13.361667] systemd[1]: Listening on Journal Socket. [ 13.364050] systemd[1]: Starting Load Kernel Modules... [ 13.364634] systemd[1]: Starting Uncomplicated firewall... [ 13.364857] systemd[1]: Created slice User and Session Slice. [ 13.383734] lp: driver loaded but no devices found [ 13.389636] ppdev: user-space parallel port driver [ 13.391729] EXT4-fs (dm-3): re-mounted. Opts: errors=remount-ro [ 13.392806] parport_pc 00:04: reported by Plug and Play ACPI [ 13.392887] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 13.490606] lp0: using parport0 (interrupt-driven). [ 13.749042] input: HP Wireless hotkeys as /devices/virtual/input/input13 [ 13.776509] hp_accel: hardware type HPB64xx found [ 13.818451] EDAC ie31200: No ECC support [ 13.862053] systemd-journald[492]: Received request to flush runtime journal from PID 1 [ 13.871266] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 13.886148] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 13.912811] Intel(R) Wireless WiFi driver for Linux [ 13.912813] Copyright(c) 2003- 2015 Intel Corporation [ 13.915047] lis3lv02d: 8 bits 3DC sensor found [ 13.923847] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm [ 13.949864] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 13.949866] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 13.949867] RAPL PMU: hw unit of domain package 2^-14 Joules [ 13.949868] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 13.949868] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 13.968103] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 13.986917] iwlwifi 0000:02:00.0: base HW address: 00:15:00:c6:7a:78 [ 14.004318] hp_wmi: query 0xd returned error 0x5 [ 14.004382] input: HP WMI hotkeys as /devices/virtual/input/input14 [ 14.030316] intel_rapl: Found RAPL domain package [ 14.030318] intel_rapl: Found RAPL domain core [ 14.030319] intel_rapl: Found RAPL domain uncore [ 14.030320] intel_rapl: Found RAPL domain dram [ 14.228056] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 14.272261] snd_hda_intel 0000:00:03.0: Linked as a consumer to 0000:00:02.0 [ 14.272320] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 14.299625] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 14.299627] snd_hda_codec_idt hdaudioC1D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 14.299629] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 14.299630] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0 [ 14.299631] snd_hda_codec_idt hdaudioC1D0: inputs: [ 14.299632] snd_hda_codec_idt hdaudioC1D0: Mic=0xc [ 14.299633] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11 [ 14.299634] snd_hda_codec_idt hdaudioC1D0: Line=0xf [ 14.309641] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 14.309710] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 14.309772] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 14.309827] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 14.309882] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 14.351385] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 14.351445] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 [ 14.351516] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22 [ 14.351572] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 [ 14.374687] iwlwifi 0000:02:00.0 wlo1: renamed from wlan0 [ 14.784069] Adding 37748732k swap on /dev/mapper/internal-swap. Priority:-2 extents:1 across:37748732k SSFS [ 14.868646] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 14.911021] audit: type=1400 audit(1569622488.415:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=989 comm="apparmor_parser" [ 14.912384] audit: type=1400 audit(1569622488.415:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=990 comm="apparmor_parser" [ 14.917635] audit: type=1400 audit(1569622488.419:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=991 comm="apparmor_parser" [ 14.918535] audit: type=1400 audit(1569622488.423:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=993 comm="apparmor_parser" [ 14.922348] audit: type=1400 audit(1569622488.423:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=997 comm="apparmor_parser" [ 14.924445] audit: type=1400 audit(1569622488.427:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=998 comm="apparmor_parser" [ 14.924448] audit: type=1400 audit(1569622488.427:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=998 comm="apparmor_parser" [ 14.924450] audit: type=1400 audit(1569622488.427:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=998 comm="apparmor_parser" [ 14.925170] audit: type=1400 audit(1569622488.427:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=999 comm="apparmor_parser" [ 14.925308] audit: type=1400 audit(1569622488.427:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=996 comm="apparmor_parser" [ 15.083287] Bluetooth: Core ver 2.22 [ 15.083320] NET: Registered protocol family 31 [ 15.083321] Bluetooth: HCI device and connection manager initialized [ 15.083985] Bluetooth: HCI socket layer initialized [ 15.083987] Bluetooth: L2CAP socket layer initialized [ 15.083992] Bluetooth: SCO socket layer initialized [ 15.214806] usbcore: registered new interface driver btusb [ 15.227864] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 15.230644] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 15.350735] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input24 [ 15.422774] Bluetooth: hci0: unexpected event for opcode 0xfc2f [ 15.438770] Bluetooth: hci0: Intel firmware patch completed and activated [ 15.645749] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.645751] Bluetooth: BNEP filters: protocol multicast [ 15.645757] Bluetooth: BNEP socket layer initialized [ 29.209082] Bluetooth: RFCOMM TTY layer initialized [ 29.209088] Bluetooth: RFCOMM socket layer initialized [ 29.209096] Bluetooth: RFCOMM ver 1.11 [ 99.145396] wlo1: authenticate with 94:91:7f:c5:8e:f6 [ 99.148563] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [ 99.153941] wlo1: authenticated [ 99.158519] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [ 99.160718] wlo1: RX AssocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=2) [ 99.162079] wlo1: associated [ 99.196629] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 99.255069] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [ 101.772073] show_signal: 22 callbacks suppressed [ 101.772075] traps: dnssec-triggerd[1557] general protection fault ip:556bcdab7c90 sp:7ffc38661520 error:0 in dnssec-triggerd[556bcdaa8000+18000] [ 7925.035382] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input25 [11564.265559] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) [11564.265560] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [11564.265562] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1) [11564.265563] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) [11564.265566] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [11564.265570] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [11564.266554] mce: CPU1: Core temperature/speed normal [11564.266555] mce: CPU0: Core temperature/speed normal [11564.266556] mce: CPU2: Package temperature/speed normal [11564.266557] mce: CPU3: Package temperature/speed normal [11564.266558] mce: CPU0: Package temperature/speed normal [11564.266560] mce: CPU1: Package temperature/speed normal [12610.482158] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 2317) [12610.482160] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 2317) [12610.482162] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 2317) [12610.482163] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 2317) [12610.482165] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 2317) [12610.482167] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 2317) [12610.483157] mce: CPU0: Core temperature/speed normal [12610.483158] mce: CPU1: Core temperature/speed normal [12610.483159] mce: CPU3: Package temperature/speed normal [12610.483161] mce: CPU2: Package temperature/speed normal [12610.483161] mce: CPU1: Package temperature/speed normal [12610.483163] mce: CPU0: Package temperature/speed normal [14593.038715] e1000e: enp0s25 NIC Link is Down [14593.367989] PM: suspend entry (deep) [14593.367991] PM: Syncing filesystems ... done. [14593.372811] Freezing user space processes ... (elapsed 0.002 seconds) done. [14593.374903] OOM killer disabled. [14593.374904] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [14593.376427] printk: Suspending console(s) (use no_console_suspend to debug) [14593.378158] wlo1: deauthenticating from 94:91:7f:c5:8e:f6 by local choice (Reason: 3=DEAUTH_LEAVING) [14593.404341] sd 0:0:0:0: [sda] Synchronizing SCSI cache [14593.404723] sd 0:0:0:0: [sda] Stopping disk [14593.476190] parport_pc 00:04: disabled [14593.476530] e1000e: EEE TX LPI TIMER: 00000011 [14593.760754] ACPI: EC: interrupt blocked [14593.780987] ACPI: Preparing to enter system sleep state S3 [14593.784423] ACPI: EC: event blocked [14593.784424] ACPI: EC: EC stopped [14593.784425] PM: Saving platform NVS memory [14593.784451] Disabling non-boot CPUs ... [14593.785084] IRQ 33: no longer affine to CPU1 [14593.786804] smpboot: CPU 1 is now offline [14593.791846] IRQ 31: no longer affine to CPU2 [14593.793147] smpboot: CPU 2 is now offline [14593.796102] IRQ 16: no longer affine to CPU3 [14593.796106] IRQ 18: no longer affine to CPU3 [14593.796109] IRQ 24: no longer affine to CPU3 [14593.796112] IRQ 27: no longer affine to CPU3 [14593.797125] smpboot: CPU 3 is now offline [14593.800787] ACPI: Low-level resume complete [14593.800834] ACPI: EC: EC started [14593.800834] PM: Restoring platform NVS memory [14593.803592] Enabling non-boot CPUs ... [14593.803634] x86: Booting SMP configuration: [14593.803634] smpboot: Booting Node 0 Processor 1 APIC 0x1 [14593.804155] cache: parent cpu1 should not be sleeping [14593.804465] CPU1 is up [14593.804505] smpboot: Booting Node 0 Processor 2 APIC 0x2 [14593.806385] cache: parent cpu2 should not be sleeping [14593.806575] CPU2 is up [14593.806602] smpboot: Booting Node 0 Processor 3 APIC 0x3 [14593.807020] cache: parent cpu3 should not be sleeping [14593.807480] CPU3 is up [14593.816980] ACPI: Waking up from system sleep state S3 [14593.955800] ACPI: EC: interrupt unblocked [14593.994599] ACPI: EC: event unblocked [14594.009530] sd 0:0:0:0: [sda] Starting disk [14594.233763] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [14594.365147] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [14594.369776] ata2.00: configured for UDMA/133 [14594.372965] ata3: SATA link down (SStatus 0 SControl 300) [14594.372996] ata6: SATA link down (SStatus 0 SControl 300) [14594.373031] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [14594.373061] ata5: SATA link down (SStatus 0 SControl 300) [14594.397593] ata1.00: configured for UDMA/133 [14594.513910] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [14595.594596] parport_pc 00:04: activated [14595.614671] acpi LNXPOWER:01: Turning OFF [14595.614751] OOM killer enabled. [14595.614753] Restarting tasks ... [14595.615233] acpi PNP0501:00: Still not present [14595.659698] Bluetooth: hci0: read Intel version: 370710018002030d00 [14595.659714] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [14595.674531] done. [14595.824498] PM: suspend exit [14595.866636] Bluetooth: hci0: unexpected event for opcode 0xfc2f [14595.882678] Bluetooth: hci0: Intel firmware patch completed and activated [14596.800739] geoclue[2161]: segfault at 20 ip 00007f33a5fcedf0 sp 00007ffe8fffd780 error 6 in libglib-2.0.so.0.6000.4[7f33a5fc8000+80000] [14596.800757] Code: fb 48 d1 ea 48 8d 04 92 48 83 ec 08 48 8d 04 42 48 89 fa 48 29 c2 48 8d 05 fd d7 0f 00 48 8d 2c 90 66 0f 1f 84 00 00 00 00 00 44 0f ab 2b 72 11 48 83 c4 08 5b 5d 41 5c 41 5d c3 66 0f 1f 44 [14597.008534] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [14597.042705] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [14597.976909] traps: dnssec-triggerd[2665] general protection fault ip:55764efddc90 sp:7ffdf2425e10 error:0 in dnssec-triggerd[55764efce000+18000] [14599.976467] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input30 [14600.614135] wlo1: authenticate with 94:91:7f:c5:8e:f6 [14600.616644] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [14600.619897] wlo1: authenticated [14600.621496] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [14600.623428] wlo1: RX AssocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=2) [14600.625104] wlo1: associated [14600.656607] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [14600.707806] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [14601.605231] traps: dnssec-triggerd[31478] general protection fault ip:555cac1efc90 sp:7ffe25957c90 error:0 in dnssec-triggerd[555cac1e0000+18000] [18862.863902] e1000e: enp0s25 NIC Link is Down [18863.158120] PM: Image not found (code -22) [18863.271005] PM: hibernation entry [18863.271730] PM: Syncing filesystems ... [18863.275124] PM: done. [18863.275126] Freezing user space processes ... (elapsed 0.002 seconds) done. [18863.277309] OOM killer disabled. [18863.277417] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [18863.277418] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [18863.277420] PM: Marking nosave pages: [mem 0xbab7f000-0xbbffefff] [18863.277486] PM: Marking nosave pages: [mem 0xbc000000-0xffffffff] [18863.278209] PM: Basic memory bitmaps created [18863.278210] PM: Preallocating image memory... done (allocated 1426787 pages) [18864.396353] PM: Allocated 5707148 kbytes in 1.11 seconds (5141.57 MB/s) [18864.396354] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [18864.398091] printk: Suspending console(s) (use no_console_suspend to debug) [18864.398347] wlo1: deauthenticating from 94:91:7f:c5:8e:f6 by local choice (Reason: 3=DEAUTH_LEAVING) [18864.445487] parport_pc 00:04: disabled [18864.767060] ACPI: EC: interrupt blocked [18864.767783] Disabling non-boot CPUs ... [18864.768176] IRQ 33: no longer affine to CPU1 [18864.769183] smpboot: CPU 1 is now offline [18864.772076] IRQ 31: no longer affine to CPU2 [18864.773084] smpboot: CPU 2 is now offline [18864.776574] smpboot: CPU 3 is now offline [18864.778460] PM: Creating hibernation image: [18864.965319] PM: Need to copy 1413998 pages [18864.965322] PM: Normal pages needed: 1413998 + 1024, available pages: 2753686 [18866.113814] PM: Hibernation image created (1413998 pages copied) [18864.779507] Enabling non-boot CPUs ... [18864.779582] x86: Booting SMP configuration: [18864.779583] smpboot: Booting Node 0 Processor 1 APIC 0x1 [18864.779976] cache: parent cpu1 should not be sleeping [18864.780234] CPU1 is up [18864.780281] smpboot: Booting Node 0 Processor 2 APIC 0x2 [18864.780667] cache: parent cpu2 should not be sleeping [18864.780829] CPU2 is up [18864.780869] smpboot: Booting Node 0 Processor 3 APIC 0x3 [18864.781227] cache: parent cpu3 should not be sleeping [18864.781399] CPU3 is up [18864.784504] ACPI: EC: interrupt unblocked [18865.175150] ata3: SATA link down (SStatus 0 SControl 300) [18865.175196] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [18865.175263] ata5: SATA link down (SStatus 0 SControl 300) [18865.175330] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [18865.175410] ata6: SATA link down (SStatus 0 SControl 300) [18865.181504] ata2.00: configured for UDMA/133 [18865.199880] ata1.00: configured for UDMA/133 [18867.584102] ACPI: button: The lid device is not compliant to SW_LID. [18867.587374] parport_pc 00:04: activated [18867.600788] PM: Using 3 thread(s) for compression [18867.600799] PM: Compressing and saving image data (1416760 pages)... [18867.600822] PM: Image saving progress: 0% [18868.275265] PM: Image saving progress: 10% [18869.083393] PM: Image saving progress: 20% [18869.904750] PM: Image saving progress: 30% [18870.722980] PM: Image saving progress: 40% [18871.558863] PM: Image saving progress: 50% [18872.422082] PM: Image saving progress: 60% [18873.246258] PM: Image saving progress: 70% [18874.216241] PM: Image saving progress: 80% [18875.186287] PM: Image saving progress: 90% [18875.893132] PM: Image saving done [18875.893135] PM: Wrote 5667040 kbytes in 8.29 seconds (683.59 MB/s) [18875.893245] PM: S| [18876.041882] printk: Suspending console(s) (use no_console_suspend to debug) [18876.091841] sd 0:0:0:0: [sda] Synchronizing SCSI cache [18876.093293] sd 0:0:0:0: [sda] Stopping disk [18876.137425] parport_pc 00:04: disabled [18876.137603] e1000e: EEE TX LPI TIMER: 00000011 [18876.428312] ACPI: EC: interrupt blocked [18876.448127] ACPI: Preparing to enter system sleep state S3 [18876.450685] ACPI: EC: event blocked [18876.450686] ACPI: EC: EC stopped [18876.450688] PM: Saving platform NVS memory [18876.450711] Disabling non-boot CPUs ... [18876.452446] smpboot: CPU 1 is now offline [18876.457156] smpboot: CPU 2 is now offline [18876.459779] smpboot: CPU 3 is now offline [18876.462677] ACPI: Low-level resume complete [18876.462775] ACPI: EC: EC started [18876.462777] PM: Restoring platform NVS memory [18876.469701] Enabling non-boot CPUs ... [18876.469844] x86: Booting SMP configuration: [18876.469847] smpboot: Booting Node 0 Processor 1 APIC 0x1 [18876.471279] cache: parent cpu1 should not be sleeping [18876.472153] CPU1 is up [18876.472245] smpboot: Booting Node 0 Processor 2 APIC 0x2 [18876.477887] cache: parent cpu2 should not be sleeping [18876.478390] CPU2 is up [18876.478455] smpboot: Booting Node 0 Processor 3 APIC 0x3 [18876.479634] cache: parent cpu3 should not be sleeping [18876.480121] CPU3 is up [18876.489670] ACPI: Waking up from system sleep state S3 [18876.633753] ACPI: EC: interrupt unblocked [18876.675270] ACPI: EC: event unblocked [18876.685659] sd 0:0:0:0: [sda] Starting disk [18876.922323] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [18877.045528] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [18877.045570] ata5: SATA link down (SStatus 0 SControl 300) [18877.045619] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [18877.045669] ata6: SATA link down (SStatus 0 SControl 300) [18877.045714] ata3: SATA link down (SStatus 0 SControl 300) [18877.052029] ata2.00: configured for UDMA/133 [18877.070133] ata1.00: configured for UDMA/133 [18877.202338] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [18878.247152] parport_pc 00:04: activated [18878.267148] acpi LNXPOWER:01: Turning OFF [18878.279522] Bluetooth: hci0: read Intel version: 370710018002030d00 [18878.279754] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [18878.371778] PM: Basic memory bitmaps freed [18878.371786] OOM killer enabled. [18878.371788] Restarting tasks ... [18878.372228] acpi PNP0501:00: Still not present [18878.388963] done. [18878.477450] Bluetooth: hci0: unexpected event for opcode 0xfc2f [18878.492475] Bluetooth: hci0: Intel firmware patch completed and activated [18878.526991] PM: hibernation exit [18879.049876] geoclue[31831]: segfault at 20 ip 00007f5e773cadf0 sp 00007ffebe01b7c0 error 6 in libglib-2.0.so.0.6000.4[7f5e773c4000+80000] [18879.049886] Code: fb 48 d1 ea 48 8d 04 92 48 83 ec 08 48 8d 04 42 48 89 fa 48 29 c2 48 8d 05 fd d7 0f 00 48 8d 2c 90 66 0f 1f 84 00 00 00 00 00 44 0f ab 2b 72 11 48 83 c4 08 5b 5d 41 5c 41 5d c3 66 0f 1f 44 [18879.718033] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [18879.755443] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [18882.995540] wlo1: authenticate with 94:91:7f:c5:8e:f6 [18882.998098] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [18883.001277] wlo1: authenticated [18883.002061] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [18883.004248] wlo1: RX AssocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=2) [18883.005805] wlo1: associated [18883.028458] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [18883.057089] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [18883.988101] traps: dnssec-triggerd[31877] general protection fault ip:562c671dac90 sp:7fff5f200800 error:0 in dnssec-triggerd[562c671cb000+18000] [19981.209299] usb 3-9: new high-speed USB device number 6 using xhci_hcd [19981.362937] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [19981.362942] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [19981.362945] usb 3-9: Product: iPhone [19981.362947] usb 3-9: Manufacturer: Apple Inc. [19981.362949] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [19981.363193] usb 3-9: Device is not authorized for usage [19981.366601] usb 3-9: authorized to connect [19981.957685] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [19981.962498] usbcore: registered new interface driver ipheth [19981.974142] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [20066.954221] usb 3-9: USB disconnect, device number 6 [20066.990032] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [20067.262111] usb 3-9: new high-speed USB device number 7 using xhci_hcd [20067.411887] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20067.411893] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20067.411896] usb 3-9: Product: iPhone [20067.411899] usb 3-9: Manufacturer: Apple Inc. [20067.411902] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20067.412198] usb 3-9: Device is not authorized for usage [20067.416405] usb 3-9: authorized to connect [20067.974449] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [20067.993385] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [20068.370339] usb 3-9: USB disconnect, device number 7 [20068.394373] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [20068.666010] usb 3-9: new high-speed USB device number 8 using xhci_hcd [20068.815454] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20068.815460] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20068.815463] usb 3-9: Product: iPhone [20068.815466] usb 3-9: Manufacturer: Apple Inc. [20068.815468] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20068.815752] usb 3-9: Device is not authorized for usage [20068.819588] usb 3-9: authorized to connect [20068.851467] usb 3-9: USB disconnect, device number 8 [20069.165829] usb 3-9: new high-speed USB device number 9 using xhci_hcd [20069.315860] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20069.315863] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20069.315864] usb 3-9: Product: iPhone [20069.315865] usb 3-9: Manufacturer: Apple Inc. [20069.315866] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20069.316014] usb 3-9: Device is not authorized for usage [20069.318602] usb 3-9: authorized to connect [20069.342089] usb 3-9: USB disconnect, device number 9 [20069.649881] usb 3-9: new high-speed USB device number 10 using xhci_hcd [20069.800059] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20069.800065] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20069.800068] usb 3-9: Product: iPhone [20069.800071] usb 3-9: Manufacturer: Apple Inc. [20069.800073] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20069.800347] usb 3-9: Device is not authorized for usage [20069.806233] usb 3-9: authorized to connect [20070.918691] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [20070.927258] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [20070.980595] usb 3-9: USB disconnect, device number 10 [20071.009664] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [20071.285586] usb 3-9: new high-speed USB device number 11 using xhci_hcd [20071.439121] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20071.439124] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20071.439126] usb 3-9: Product: iPhone [20071.439128] usb 3-9: Manufacturer: Apple Inc. [20071.439129] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20071.439310] usb 3-9: Device is not authorized for usage [20071.442326] usb 3-9: authorized to connect [20072.007592] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [20072.022119] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [20073.149529] usb 3-9: USB disconnect, device number 11 [20073.177416] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [20073.453505] usb 3-9: new high-speed USB device number 12 using xhci_hcd [20073.602734] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20073.602737] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20073.602739] usb 3-9: Product: iPhone [20073.602741] usb 3-9: Manufacturer: Apple Inc. [20073.602743] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20073.602894] usb 3-9: Device is not authorized for usage [20073.605557] usb 3-9: authorized to connect [20073.629085] usb 3-9: USB disconnect, device number 12 [20073.941353] usb 3-9: new high-speed USB device number 13 using xhci_hcd [20074.091461] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20074.091465] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20074.091467] usb 3-9: Product: iPhone [20074.091468] usb 3-9: Manufacturer: Apple Inc. [20074.091470] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20074.091685] usb 3-9: Device is not authorized for usage [20074.094486] usb 3-9: authorized to connect [20074.131754] usb 3-9: USB disconnect, device number 13 [20074.437417] usb 3-9: new high-speed USB device number 14 using xhci_hcd [20074.587903] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20074.587909] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20074.587913] usb 3-9: Product: iPhone [20074.587916] usb 3-9: Manufacturer: Apple Inc. [20074.587918] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20074.588279] usb 3-9: Device is not authorized for usage [20074.592363] usb 3-9: authorized to connect [20075.715691] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [20075.724465] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [20075.749582] usb 3-9: USB disconnect, device number 14 [20075.789515] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [20076.065261] usb 3-9: new high-speed USB device number 15 using xhci_hcd [20076.215451] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20076.215458] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20076.215461] usb 3-9: Product: iPhone [20076.215465] usb 3-9: Manufacturer: Apple Inc. [20076.215467] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20076.215830] usb 3-9: Device is not authorized for usage [20076.220843] usb 3-9: authorized to connect [20076.793267] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [20076.812397] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [20076.854901] usb 3-9: USB disconnect, device number 15 [20076.877179] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [20077.157107] usb 3-9: new high-speed USB device number 16 using xhci_hcd [20077.307068] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20077.307073] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20077.307076] usb 3-9: Product: iPhone [20077.307079] usb 3-9: Manufacturer: Apple Inc. [20077.307081] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20077.307362] usb 3-9: Device is not authorized for usage [20077.310676] usb 3-9: authorized to connect [20077.873012] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [20077.890632] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [20078.926164] usb 3-9: USB disconnect, device number 16 [20078.952838] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [20082.516632] usb 3-4: new high-speed USB device number 17 using xhci_hcd [20082.666672] usb 3-4: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [20082.666679] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20082.666682] usb 3-4: Product: iPhone [20082.666685] usb 3-4: Manufacturer: Apple Inc. [20082.666688] usb 3-4: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [20082.666982] usb 3-4: Device is not authorized for usage [20082.670951] usb 3-4: authorized to connect [20083.241450] ipheth 3-4:4.2: Apple iPhone USB Ethernet device attached [20083.266758] ipheth 3-4:4.2 enp0s20u4c4i2: renamed from eth0 [32831.610017] usb 3-4: USB disconnect, device number 17 [32831.647656] ipheth 3-4:4.2: Apple iPhone USB Ethernet now disconnected [33335.479228] usb 3-9: new high-speed USB device number 18 using xhci_hcd [33335.629170] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [33335.629176] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [33335.629180] usb 3-9: Product: iPhone [33335.629182] usb 3-9: Manufacturer: Apple Inc. [33335.629185] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [33335.629493] usb 3-9: Device is not authorized for usage [33335.633402] usb 3-9: authorized to connect [33336.197996] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [33336.240743] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [33336.271624] usb 3-9: USB disconnect, device number 18 [33336.299131] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [33336.571113] usb 3-9: new high-speed USB device number 19 using xhci_hcd [33336.720720] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [33336.720724] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [33336.720726] usb 3-9: Product: iPhone [33336.720727] usb 3-9: Manufacturer: Apple Inc. [33336.720729] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [33336.720885] usb 3-9: Device is not authorized for usage [33336.727716] usb 3-9: authorized to connect [33336.807108] usb 3-9: USB disconnect, device number 19 [33337.123045] usb 3-9: new high-speed USB device number 20 using xhci_hcd [33337.275719] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [33337.275722] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [33337.275723] usb 3-9: Product: iPhone [33337.275725] usb 3-9: Manufacturer: Apple Inc. [33337.275726] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [33337.275866] usb 3-9: Device is not authorized for usage [33337.279330] usb 3-9: authorized to connect [33337.875446] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [33337.895551] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [33351.411055] usb 3-9: USB disconnect, device number 20 [33351.442741] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [33351.726858] usb 3-9: new high-speed USB device number 21 using xhci_hcd [33351.877225] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [33351.877231] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [33351.877234] usb 3-9: Product: iPhone [33351.877237] usb 3-9: Manufacturer: Apple Inc. [33351.877239] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [33351.877534] usb 3-9: Device is not authorized for usage [33351.881351] usb 3-9: authorized to connect [33352.456554] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [33352.467532] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [33705.093292] usb 3-9: USB disconnect, device number 21 [33705.127356] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [33705.399423] usb 3-9: new high-speed USB device number 22 using xhci_hcd [33705.549186] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [33705.549193] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [33705.549196] usb 3-9: Product: iPhone [33705.549200] usb 3-9: Manufacturer: Apple Inc. [33705.549202] usb 3-9: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [33705.549511] usb 3-9: Device is not authorized for usage [33705.552922] usb 3-9: authorized to connect [33706.121191] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [33706.129395] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [35375.507878] e1000e: enp0s25 NIC Link is Down [35375.962794] PM: suspend entry (deep) [35375.962798] PM: Syncing filesystems ... done. [35375.966613] Freezing user space processes ... (elapsed 0.001 seconds) done. [35375.968437] OOM killer disabled. [35375.968437] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [35375.969799] printk: Suspending console(s) (use no_console_suspend to debug) [35375.970459] wlo1: deauthenticating from 94:91:7f:c5:8e:f6 by local choice (Reason: 3=DEAUTH_LEAVING) [35375.992462] sd 0:0:0:0: [sda] Synchronizing SCSI cache [35375.992761] sd 0:0:0:0: [sda] Stopping disk [35375.996336] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [35376.064869] parport_pc 00:04: disabled [35376.065315] e1000e: EEE TX LPI TIMER: 00000011 [35376.349552] ACPI: EC: interrupt blocked [35376.369192] ACPI: Preparing to enter system sleep state S3 [35376.372487] ACPI: EC: event blocked [35376.372488] ACPI: EC: EC stopped [35376.372490] PM: Saving platform NVS memory [35376.372518] Disabling non-boot CPUs ... [35376.373345] IRQ 33: no longer affine to CPU1 [35376.375136] smpboot: CPU 1 is now offline [35376.380336] IRQ 31: no longer affine to CPU2 [35376.382116] smpboot: CPU 2 is now offline [35376.387081] IRQ 27: no longer affine to CPU3 [35376.388118] smpboot: CPU 3 is now offline [35376.393477] ACPI: Low-level resume complete [35376.393526] ACPI: EC: EC started [35376.393527] PM: Restoring platform NVS memory [35376.396307] Enabling non-boot CPUs ... [35376.396398] x86: Booting SMP configuration: [35376.396399] smpboot: Booting Node 0 Processor 1 APIC 0x1 [35376.396918] cache: parent cpu1 should not be sleeping [35376.397231] CPU1 is up [35376.397261] smpboot: Booting Node 0 Processor 2 APIC 0x2 [35376.399166] cache: parent cpu2 should not be sleeping [35376.399357] CPU2 is up [35376.399381] smpboot: Booting Node 0 Processor 3 APIC 0x3 [35376.399794] cache: parent cpu3 should not be sleeping [35376.399990] CPU3 is up [35376.403409] ACPI: Waking up from system sleep state S3 [35376.539947] ACPI: EC: interrupt unblocked [35376.579364] ACPI: EC: event unblocked [35376.590111] sd 0:0:0:0: [sda] Starting disk [35376.826380] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [35376.953593] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [35376.953634] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [35376.953672] ata5: SATA link down (SStatus 0 SControl 300) [35376.953732] ata3: SATA link down (SStatus 0 SControl 300) [35376.953770] ata6: SATA link down (SStatus 0 SControl 300) [35376.958495] ata2.00: configured for UDMA/133 [35376.978240] ata1.00: configured for UDMA/133 [35377.102534] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [35377.378581] usb 3-9: reset high-speed USB device number 22 using xhci_hcd [35378.170715] parport_pc 00:04: activated [35378.186896] acpi LNXPOWER:01: Turning OFF [35378.186934] OOM killer enabled. [35378.186934] Restarting tasks ... [35378.187149] acpi PNP0501:00: Still not present [35378.201298] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [35378.214274] Bluetooth: hci0: read Intel version: 370710018002030d00 [35378.214303] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [35378.226286] done. [35378.400043] PM: suspend exit [35378.418231] Bluetooth: hci0: unexpected event for opcode 0xfc2f [35378.434279] Bluetooth: hci0: Intel firmware patch completed and activated [35378.489856] ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0 [35379.520505] geoclue[11185]: segfault at 20 ip 00007fa5e2a78df0 sp 00007ffef81c0190 error 6 in libglib-2.0.so.0.6000.4[7fa5e2a72000+80000] [35379.520535] Code: fb 48 d1 ea 48 8d 04 92 48 83 ec 08 48 8d 04 42 48 89 fa 48 29 c2 48 8d 05 fd d7 0f 00 48 8d 2c 90 66 0f 1f 84 00 00 00 00 00 44 0f ab 2b 72 11 48 83 c4 08 5b 5d 41 5c 41 5d c3 66 0f 1f 44 [35379.585430] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [35379.622156] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [35380.716084] traps: dnssec-triggerd[11410] general protection fault ip:563da4295c90 sp:7ffcfe787bc0 error:0 in dnssec-triggerd[563da4286000+18000] [35383.009203] wlo1: authenticate with 94:91:7f:c5:8e:f6 [35383.011698] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [35383.014865] wlo1: authenticated [35383.018123] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [35383.020213] wlo1: RX AssocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=2) [35383.022208] wlo1: associated [35383.051889] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [35383.091751] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [35384.101096] traps: dnssec-triggerd[30617] general protection fault ip:565061a28c90 sp:7ffd48a790c0 error:0 in dnssec-triggerd[565061a19000+18000] [35385.403027] usb 3-9: USB disconnect, device number 22 [35385.446021] ipheth 3-9:4.2: Apple iPhone USB Ethernet now disconnected [35386.238386] traps: dnssec-triggerd[30973] general protection fault ip:55615ff79c90 sp:7ffc5dba9300 error:0 in dnssec-triggerd[55615ff6a000+18000] [35906.376074] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 2453) [35906.376076] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 2453) [35906.376077] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 2453) [35906.376078] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 2453) [35906.376080] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 2453) [35906.376081] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 2453) [35906.377075] mce: CPU0: Core temperature/speed normal [35906.377076] mce: CPU1: Core temperature/speed normal [35906.377077] mce: CPU2: Package temperature/speed normal [35906.377078] mce: CPU3: Package temperature/speed normal [35906.377079] mce: CPU1: Package temperature/speed normal [35906.377080] mce: CPU0: Package temperature/speed normal [36223.710370] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 5039) [36223.710372] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 5039) [36223.710373] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 5039) [36223.710374] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 5039) [36223.710376] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 5039) [36223.710378] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 5039) [36223.711368] mce: CPU0: Core temperature/speed normal [36223.711369] mce: CPU1: Core temperature/speed normal [36223.711370] mce: CPU3: Package temperature/speed normal [36223.711371] mce: CPU2: Package temperature/speed normal [36223.711372] mce: CPU1: Package temperature/speed normal [36223.711373] mce: CPU0: Package temperature/speed normal [37060.534809] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input39 [37527.701253] usb 3-2: new low-speed USB device number 24 using xhci_hcd [37527.874063] usb 3-2: New USB device found, idVendor=045e, idProduct=00db, bcdDevice= 1.73 [37527.874068] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [37527.874071] usb 3-2: Product: Natural® Ergonomic Keyboard 4000 [37527.874073] usb 3-2: Manufacturer: Microsoft [37527.874413] usb 3-2: Device is not authorized for usage [37527.877102] usb 3-2: authorized to connect [37528.416785] hidraw: raw HID events driver (C) Jiri Kosina [37528.439711] usbcore: registered new interface driver usbhid [37528.439713] usbhid: USB HID core driver [37528.452658] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:045E:00DB.0001/input/input40 [37528.513713] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:14.0-2/input0 [37528.514317] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:045E:00DB.0002/input/input41 [37528.577712] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:14.0-2/input1 [43004.928452] wlo1: disconnect from AP 94:91:7f:c5:8e:f6 for new auth to 68:ff:7b:72:c0:f9 [43004.941250] wlo1: authenticate with 68:ff:7b:72:c0:f9 [43004.943760] wlo1: send auth to 68:ff:7b:72:c0:f9 (try 1/3) [43004.946787] wlo1: authenticated [43004.948754] wlo1: associate with 68:ff:7b:72:c0:f9 (try 1/3) [43004.949730] wlo1: RX ReassocResp from 68:ff:7b:72:c0:f9 (capab=0x11 status=0 aid=1) [43004.950350] wlo1: associated [46946.712693] usb 3-2: USB disconnect, device number 24 [46957.083162] wlo1: disconnect from AP 68:ff:7b:72:c0:f9 for new auth to 94:91:7f:c5:8e:f6 [46957.089448] wlo1: authenticate with 94:91:7f:c5:8e:f6 [46957.091829] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [46957.097057] wlo1: authenticated [46957.101130] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [46957.103508] wlo1: RX ReassocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=2) [46957.104574] wlo1: associated [46957.136315] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [48902.157011] usb 3-3: new high-speed USB device number 25 using xhci_hcd [48902.307590] usb 3-3: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04 [48902.307596] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [48902.307600] usb 3-3: Product: iPhone [48902.307603] usb 3-3: Manufacturer: Apple Inc. [48902.307605] usb 3-3: SerialNumber: f4af8ff86683d5698d623559fb69540e1b206a4a [48902.307921] usb 3-3: Device is not authorized for usage [48902.311535] usb 3-3: authorized to connect [48902.883225] ipheth 3-3:4.2: Apple iPhone USB Ethernet device attached [48902.898544] ipheth 3-3:4.2 enp0s20u3c4i2: renamed from eth0 [48934.018054] usb 3-3: USB disconnect, device number 25 [48934.048683] ipheth 3-3:4.2: Apple iPhone USB Ethernet now disconnected [56003.328819] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input42 [56428.181231] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input43 [56452.910975] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input44 [56693.579849] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input45 [57083.314660] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input46 [57108.032076] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input47 [58391.901154] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input48 [58420.514093] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input49 [65895.889242] e1000e: enp0s25 NIC Link is Down [65896.783862] PM: suspend entry (deep) [65896.783864] PM: Syncing filesystems ... done. [65896.789495] Freezing user space processes ... (elapsed 0.002 seconds) done. [65896.791620] OOM killer disabled. [65896.791620] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [65896.792953] printk: Suspending console(s) (use no_console_suspend to debug) [65896.793483] wlo1: deauthenticating from 94:91:7f:c5:8e:f6 by local choice (Reason: 3=DEAUTH_LEAVING) [65896.817679] sd 0:0:0:0: [sda] Synchronizing SCSI cache [65896.817810] sd 0:0:0:0: [sda] Stopping disk [65896.888516] parport_pc 00:04: disabled [65896.888819] e1000e: EEE TX LPI TIMER: 00000011 [65897.182580] ACPI: EC: interrupt blocked [65897.202474] ACPI: Preparing to enter system sleep state S3 [65897.205694] ACPI: EC: event blocked [65897.205696] ACPI: EC: EC stopped [65897.205697] PM: Saving platform NVS memory [65897.205721] Disabling non-boot CPUs ... [65897.206463] IRQ 33: no longer affine to CPU1 [65897.207481] smpboot: CPU 1 is now offline [65897.212410] IRQ 31: no longer affine to CPU2 [65897.213425] smpboot: CPU 2 is now offline [65897.215657] IRQ 27: no longer affine to CPU3 [65897.216661] smpboot: CPU 3 is now offline [65897.219585] ACPI: Low-level resume complete [65897.219632] ACPI: EC: EC started [65897.219632] PM: Restoring platform NVS memory [65897.222400] Enabling non-boot CPUs ... [65897.222442] x86: Booting SMP configuration: [65897.222442] smpboot: Booting Node 0 Processor 1 APIC 0x1 [65897.222939] cache: parent cpu1 should not be sleeping [65897.223285] CPU1 is up [65897.223322] smpboot: Booting Node 0 Processor 2 APIC 0x2 [65897.225234] cache: parent cpu2 should not be sleeping [65897.225422] CPU2 is up [65897.225447] smpboot: Booting Node 0 Processor 3 APIC 0x3 [65897.225862] cache: parent cpu3 should not be sleeping [65897.226305] CPU3 is up [65897.235809] ACPI: Waking up from system sleep state S3 [65897.373203] ACPI: EC: interrupt unblocked [65897.420571] ACPI: EC: event unblocked [65897.431340] sd 0:0:0:0: [sda] Starting disk [65897.659080] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [65897.794695] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [65897.794739] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [65897.794778] ata5: SATA link down (SStatus 0 SControl 300) [65897.794830] ata6: SATA link down (SStatus 0 SControl 300) [65897.794871] ata3: SATA link down (SStatus 0 SControl 300) [65897.799564] ata2.00: configured for UDMA/133 [65897.819277] ata1.00: configured for UDMA/133 [65897.935337] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [65899.016025] parport_pc 00:04: activated [65899.030665] acpi LNXPOWER:01: Turning OFF [65899.030698] OOM killer enabled. [65899.030699] Restarting tasks ... [65899.030866] acpi PNP0501:00: Still not present [65899.042960] Bluetooth: hci0: read Intel version: 370710018002030d00 [65899.043100] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [65899.049851] done. [65899.150260] PM: suspend exit [65899.185948] Bluetooth: hci0: unexpected event for opcode 0xfc2f [65899.200964] Bluetooth: hci0: Intel firmware patch completed and activated [65899.612461] geoclue[30580]: segfault at 20 ip 00007f66904a3df0 sp 00007ffe868ef330 error 6 in libglib-2.0.so.0.6000.4[7f669049d000+80000] [65899.612470] Code: fb 48 d1 ea 48 8d 04 92 48 83 ec 08 48 8d 04 42 48 89 fa 48 29 c2 48 8d 05 fd d7 0f 00 48 8d 2c 90 66 0f 1f 84 00 00 00 00 00 44 0f ab 2b 72 11 48 83 c4 08 5b 5d 41 5c 41 5d c3 66 0f 1f 44 [65899.991975] dnssec-triggerd[31146]: segfault at 65626f82 ip 000055c4f80fcc90 sp 00007fff50f44be0 error 4 in dnssec-triggerd[55c4f80ed000+18000] [65899.991980] Code: 89 d6 55 53 48 89 fb 4c 89 e7 e8 db 06 ff ff 48 8b 1b 48 85 db 74 3b 48 89 c5 eb 0e 66 0f 1f 44 00 00 48 8b 1b 48 85 db 74 28 <48> 3b 6b 10 75 f2 48 8b 7b 08 48 89 ea 4c 89 e6 e8 8b 05 ff ff 85 [65900.371713] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [65900.404230] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [65902.983154] wlo1: authenticate with 68:ff:7b:72:c0:f9 [65902.985537] wlo1: send auth to 68:ff:7b:72:c0:f9 (try 1/3) [65902.986446] wlo1: authenticated [65902.986916] wlo1: associate with 68:ff:7b:72:c0:f9 (try 1/3) [65902.987775] wlo1: RX AssocResp from 68:ff:7b:72:c0:f9 (capab=0x11 status=0 aid=1) [65902.988981] wlo1: associated [65903.192671] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [65903.986999] dnssec-triggerd[4816]: segfault at 38 ip 000055d639bdac90 sp 00007ffe66ecc3b0 error 4 in dnssec-triggerd[55d639bcb000+18000] [65903.987006] Code: 89 d6 55 53 48 89 fb 4c 89 e7 e8 db 06 ff ff 48 8b 1b 48 85 db 74 3b 48 89 c5 eb 0e 66 0f 1f 44 00 00 48 8b 1b 48 85 db 74 28 <48> 3b 6b 10 75 f2 48 8b 7b 08 48 89 ea 4c 89 e6 e8 8b 05 ff ff 85 [65904.249989] input: 30:22:00:1D:8D:7A as /devices/virtual/input/input54 [69010.492459] e1000e: enp0s25 NIC Link is Down [69010.789040] PM: suspend entry (deep) [69010.789042] PM: Syncing filesystems ... done. [69010.793564] Freezing user space processes ... (elapsed 0.002 seconds) done. [69010.795701] OOM killer disabled. [69010.795702] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [69010.796619] printk: Suspending console(s) (use no_console_suspend to debug) [69010.797349] wlo1: deauthenticating from 68:ff:7b:72:c0:f9 by local choice (Reason: 3=DEAUTH_LEAVING) [69010.816616] sd 0:0:0:0: [sda] Synchronizing SCSI cache [69010.816941] sd 0:0:0:0: [sda] Stopping disk [69010.896127] parport_pc 00:04: disabled [69010.896673] e1000e: EEE TX LPI TIMER: 00000011 [69011.049498] ACPI: EC: interrupt blocked [69011.069328] ACPI: Preparing to enter system sleep state S3 [69011.073082] ACPI: EC: event blocked [69011.073084] ACPI: EC: EC stopped [69011.073085] PM: Saving platform NVS memory [69011.073111] Disabling non-boot CPUs ... [69011.073979] IRQ 33: no longer affine to CPU1 [69011.075770] smpboot: CPU 1 is now offline [69011.080293] IRQ 31: no longer affine to CPU2 [69011.081367] smpboot: CPU 2 is now offline [69011.086077] IRQ 27: no longer affine to CPU3 [69011.087096] smpboot: CPU 3 is now offline [69011.094003] ACPI: Low-level resume complete [69011.094101] ACPI: EC: EC started [69011.094103] PM: Restoring platform NVS memory [69011.101325] Enabling non-boot CPUs ... [69011.101481] x86: Booting SMP configuration: [69011.101484] smpboot: Booting Node 0 Processor 1 APIC 0x1 [69011.102890] cache: parent cpu1 should not be sleeping [69011.103827] CPU1 is up [69011.103926] smpboot: Booting Node 0 Processor 2 APIC 0x2 [69011.109524] cache: parent cpu2 should not be sleeping [69011.110020] CPU2 is up [69011.110079] smpboot: Booting Node 0 Processor 3 APIC 0x3 [69011.111223] cache: parent cpu3 should not be sleeping [69011.111813] CPU3 is up [69011.121410] ACPI: Waking up from system sleep state S3 [69011.267432] ACPI: EC: interrupt unblocked [69011.309056] ACPI: EC: event unblocked [69011.322251] sd 0:0:0:0: [sda] Starting disk [69011.548111] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [69011.687846] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [69011.687917] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [69011.687956] ata6: SATA link down (SStatus 0 SControl 300) [69011.687996] ata5: SATA link down (SStatus 0 SControl 300) [69011.688029] ata3: SATA link down (SStatus 0 SControl 300) [69011.693007] ata2.00: configured for UDMA/133 [69011.712425] ata1.00: configured for UDMA/133 [69011.824277] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [69012.880847] parport_pc 00:04: activated [69012.902660] acpi LNXPOWER:01: Turning OFF [69012.902737] OOM killer enabled. [69012.902738] Restarting tasks ... [69012.903204] acpi PNP0501:00: Still not present [69012.915058] Bluetooth: hci0: read Intel version: 370710018002030d00 [69012.915072] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [69012.923778] done. [69013.079284] PM: suspend exit [69013.122034] Bluetooth: hci0: unexpected event for opcode 0xfc2f [69013.138079] Bluetooth: hci0: Intel firmware patch completed and activated [69013.951253] geoclue[4832]: segfault at 20 ip 00007fcc8cc7adf0 sp 00007ffecb3f8e70 error 6 in libglib-2.0.so.0.6000.4[7fcc8cc74000+80000] [69013.951276] Code: fb 48 d1 ea 48 8d 04 92 48 83 ec 08 48 8d 04 42 48 89 fa 48 29 c2 48 8d 05 fd d7 0f 00 48 8d 2c 90 66 0f 1f 84 00 00 00 00 00 44 0f ab 2b 72 11 48 83 c4 08 5b 5d 41 5c 41 5d c3 66 0f 1f 44 [69014.314266] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [69014.348804] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [69017.422557] wlo1: authenticate with 94:91:7f:c5:8e:f6 [69017.425122] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [69017.428183] wlo1: authenticated [69017.431801] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [69017.433902] wlo1: RX AssocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=1) [69017.435838] wlo1: associated [69017.437039] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [69017.467136] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [69018.408917] traps: dnssec-triggerd[5216] general protection fault ip:5571674d4c90 sp:7fff79ee1650 error:0 in dnssec-triggerd[5571674c5000+18000] [69020.134745] traps: dnssec-triggerd[11822] general protection fault ip:55da6ea6ec90 sp:7ffddfdacf50 error:0 in dnssec-triggerd[55da6ea5f000+18000] [73663.216179] e1000e: enp0s25 NIC Link is Down [73663.500133] PM: suspend entry (deep) [73663.500135] PM: Syncing filesystems ... done. [73663.506155] Freezing user space processes ... (elapsed 0.002 seconds) done. [73663.508585] OOM killer disabled. [73663.508586] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [73663.509971] printk: Suspending console(s) (use no_console_suspend to debug) [73663.510606] wlo1: deauthenticating from 94:91:7f:c5:8e:f6 by local choice (Reason: 3=DEAUTH_LEAVING) [73663.529044] sd 0:0:0:0: [sda] Synchronizing SCSI cache [73663.529354] sd 0:0:0:0: [sda] Stopping disk [73663.608828] parport_pc 00:04: disabled [73663.609399] e1000e: EEE TX LPI TIMER: 00000011 [73663.766098] ACPI: EC: interrupt blocked [73663.785874] ACPI: Preparing to enter system sleep state S3 [73663.789031] ACPI: EC: event blocked [73663.789032] ACPI: EC: EC stopped [73663.789034] PM: Saving platform NVS memory [73663.789057] Disabling non-boot CPUs ... [73663.789754] IRQ 33: no longer affine to CPU1 [73663.790787] smpboot: CPU 1 is now offline [73663.795867] IRQ 31: no longer affine to CPU2 [73663.796881] smpboot: CPU 2 is now offline [73663.800166] smpboot: CPU 3 is now offline [73663.804549] ACPI: Low-level resume complete [73663.804649] ACPI: EC: EC started [73663.804650] PM: Restoring platform NVS memory [73663.811688] Enabling non-boot CPUs ... [73663.812000] x86: Booting SMP configuration: [73663.812003] smpboot: Booting Node 0 Processor 1 APIC 0x1 [73663.813399] cache: parent cpu1 should not be sleeping [73663.814295] CPU1 is up [73663.814367] smpboot: Booting Node 0 Processor 2 APIC 0x2 [73663.819965] cache: parent cpu2 should not be sleeping [73663.820454] CPU2 is up [73663.820516] smpboot: Booting Node 0 Processor 3 APIC 0x3 [73663.821655] cache: parent cpu3 should not be sleeping [73663.822165] CPU3 is up [73663.831694] ACPI: Waking up from system sleep state S3 [73663.975376] ACPI: EC: interrupt unblocked [73664.017282] ACPI: EC: event unblocked [73664.027784] sd 0:0:0:0: [sda] Starting disk [73664.252224] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [73664.387358] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [73664.387401] ata5: SATA link down (SStatus 0 SControl 300) [73664.387447] ata3: SATA link down (SStatus 0 SControl 300) [73664.387496] ata6: SATA link down (SStatus 0 SControl 300) [73664.387544] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [73664.392163] ata2.00: configured for UDMA/133 [73664.412100] ata1.00: configured for UDMA/133 [73664.528127] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [73665.588914] parport_pc 00:04: activated [73665.608868] acpi LNXPOWER:01: Turning OFF [73665.608955] OOM killer enabled. [73665.608957] Restarting tasks ... [73665.609360] acpi PNP0501:00: Still not present [73665.621105] Bluetooth: hci0: read Intel version: 370710018002030d00 [73665.621419] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [73665.629879] done. [73665.768522] PM: suspend exit [73665.825076] Bluetooth: hci0: unexpected event for opcode 0xfc2f [73665.841121] Bluetooth: hci0: Intel firmware patch completed and activated [73666.765483] geoclue[12005]: segfault at 20 ip 00007fa11d218df0 sp 00007ffca0c6a800 error 6 in libglib-2.0.so.0.6000.4[7fa11d212000+80000] [73666.765505] Code: fb 48 d1 ea 48 8d 04 92 48 83 ec 08 48 8d 04 42 48 89 fa 48 29 c2 48 8d 05 fd d7 0f 00 48 8d 2c 90 66 0f 1f 84 00 00 00 00 00 44 0f ab 2b 72 11 48 83 c4 08 5b 5d 41 5c 41 5d c3 66 0f 1f 44 [73666.975038] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [73667.008356] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [73670.181222] wlo1: authenticate with 94:91:7f:c5:8e:f6 [73670.183723] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [73670.186828] wlo1: authenticated [73670.187859] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [73670.190200] wlo1: RX AssocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=1) [73670.191866] wlo1: associated [73670.207240] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [73670.221935] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [77336.682619] e1000e: enp0s25 NIC Link is Down [77337.021081] PM: suspend entry (deep) [77337.021084] PM: Syncing filesystems ... done. [77337.026872] Freezing user space processes ... (elapsed 0.002 seconds) done. [77337.029250] OOM killer disabled. [77337.029250] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [77337.030654] printk: Suspending console(s) (use no_console_suspend to debug) [77337.034777] wlo1: deauthenticating from 94:91:7f:c5:8e:f6 by local choice (Reason: 3=DEAUTH_LEAVING) [77337.051484] sd 0:0:0:0: [sda] Synchronizing SCSI cache [77337.051767] sd 0:0:0:0: [sda] Stopping disk [77337.132446] parport_pc 00:04: disabled [77337.132886] e1000e: EEE TX LPI TIMER: 00000011 [77337.420492] ACPI: EC: interrupt blocked [77337.440312] ACPI: Preparing to enter system sleep state S3 [77337.443092] ACPI: EC: event blocked [77337.443094] ACPI: EC: EC stopped [77337.443095] PM: Saving platform NVS memory [77337.443121] Disabling non-boot CPUs ... [77337.443952] IRQ 33: no longer affine to CPU1 [77337.444971] smpboot: CPU 1 is now offline [77337.450041] IRQ 31: no longer affine to CPU2 [77337.451054] smpboot: CPU 2 is now offline [77337.453950] smpboot: CPU 3 is now offline [77337.456500] ACPI: Low-level resume complete [77337.456547] ACPI: EC: EC started [77337.456548] PM: Restoring platform NVS memory [77337.459326] Enabling non-boot CPUs ... [77337.459384] x86: Booting SMP configuration: [77337.459385] smpboot: Booting Node 0 Processor 1 APIC 0x1 [77337.459872] cache: parent cpu1 should not be sleeping [77337.460188] CPU1 is up [77337.460235] smpboot: Booting Node 0 Processor 2 APIC 0x2 [77337.462148] cache: parent cpu2 should not be sleeping [77337.462345] CPU2 is up [77337.462371] smpboot: Booting Node 0 Processor 3 APIC 0x3 [77337.462786] cache: parent cpu3 should not be sleeping [77337.463238] CPU3 is up [77337.472761] ACPI: Waking up from system sleep state S3 [77337.610659] ACPI: EC: interrupt unblocked [77337.649961] ACPI: EC: event unblocked [77337.660624] sd 0:0:0:0: [sda] Starting disk [77337.884935] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [77338.020591] ata5: SATA link down (SStatus 0 SControl 300) [77338.020634] ata3: SATA link down (SStatus 0 SControl 300) [77338.020682] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [77338.020833] ata6: SATA link down (SStatus 0 SControl 300) [77338.020873] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [77338.025706] ata2.00: configured for UDMA/133 [77338.045251] ata1.00: configured for UDMA/133 [77338.161260] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [77339.245817] parport_pc 00:04: activated [77339.268535] acpi LNXPOWER:01: Turning OFF [77339.268611] OOM killer enabled. [77339.268612] Restarting tasks ... [77339.269101] acpi PNP0501:00: Still not present [77339.280904] Bluetooth: hci0: read Intel version: 370710018002030d00 [77339.281065] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [77339.292924] done. [77339.454441] PM: suspend exit [77339.486855] Bluetooth: hci0: unexpected event for opcode 0xfc2f [77339.502918] Bluetooth: hci0: Intel firmware patch completed and activated [77340.275761] geoclue[19718]: segfault at 20 ip 00007fc1ac277df0 sp 00007ffc9edd0e10 error 6 in libglib-2.0.so.0.6000.4[7fc1ac271000+80000] [77340.275785] Code: fb 48 d1 ea 48 8d 04 92 48 83 ec 08 48 8d 04 42 48 89 fa 48 29 c2 48 8d 05 fd d7 0f 00 48 8d 2c 90 66 0f 1f 84 00 00 00 00 00 44 0f ab 2b 72 11 48 83 c4 08 5b 5d 41 5c 41 5d c3 66 0f 1f 44 [77340.646423] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [77340.682803] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [77341.560931] traps: dnssec-triggerd[12015] general protection fault ip:562593241c90 sp:7ffd787e7370 error:0 in dnssec-triggerd[562593232000+18000] [77343.798250] wlo1: authenticate with 94:91:7f:c5:8e:f6 [77343.800835] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [77343.803977] wlo1: authenticated [77343.804782] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [77343.807395] wlo1: RX AssocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=2) [77343.808860] wlo1: associated [77343.831643] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [77343.871630] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [77344.734041] traps: dnssec-triggerd[28294] general protection fault ip:5644682afc90 sp:7fff6dec8a00 error:0 in dnssec-triggerd[5644682a0000+18000] [82327.241126] audit: type=1400 audit(1569790002.070:33): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/vectro/.cache/mesa_shader_cache/index" pid=4294 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000 [82327.327454] audit: type=1400 audit(1569790002.158:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/kdeglobals" pid=4293 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [82327.328214] audit: type=1400 audit(1569790002.158:35): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/kdeglobals" pid=4293 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [82327.332991] audit: type=1400 audit(1569790002.162:36): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/sys/kernel/core_pattern" pid=4293 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [82327.336467] audit: type=1400 audit(1569790002.166:37): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/kdeglobals" pid=4293 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [82327.336871] audit: type=1400 audit(1569790002.166:38): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/breezerc" pid=4293 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [82327.456503] audit: type=1400 audit(1569790002.286:39): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/kubuntu-default-settings/kf5-settings/kdeglobals" pid=4293 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [82327.457548] audit: type=1400 audit(1569790002.286:40): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/vectro/.config/emaildefaults" pid=4293 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [82327.458797] audit: type=1400 audit(1569790002.290:41): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/vectro/.config/kioslaverc" pid=4293 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [82327.528760] audit: type=1400 audit(1569790002.358:42): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/vectro/.cache/mesa_shader_cache/index" pid=4293 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000 [90945.565042] e1000e: enp0s25 NIC Link is Down [90946.781683] PM: suspend entry (deep) [90946.781689] PM: Syncing filesystems ... done. [90946.804026] Freezing user space processes ... (elapsed 0.005 seconds) done. [90946.809256] OOM killer disabled. [90946.809257] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [90946.811038] printk: Suspending console(s) (use no_console_suspend to debug) [90946.833364] wlo1: deauthenticating from 94:91:7f:c5:8e:f6 by local choice (Reason: 3=DEAUTH_LEAVING) [90946.857716] sd 0:0:0:0: [sda] Synchronizing SCSI cache [90946.858093] sd 0:0:0:0: [sda] Stopping disk [90946.932920] parport_pc 00:04: disabled [90946.933295] e1000e: EEE TX LPI TIMER: 00000011 [90947.230538] ACPI: EC: interrupt blocked [90947.250321] ACPI: Preparing to enter system sleep state S3 [90947.252728] ACPI: EC: event blocked [90947.252730] ACPI: EC: EC stopped [90947.252731] PM: Saving platform NVS memory [90947.252754] Disabling non-boot CPUs ... [90947.253489] IRQ 33: no longer affine to CPU1 [90947.255171] smpboot: CPU 1 is now offline [90947.259908] IRQ 31: no longer affine to CPU2 [90947.260946] smpboot: CPU 2 is now offline [90947.264226] smpboot: CPU 3 is now offline [90947.268678] ACPI: Low-level resume complete [90947.268777] ACPI: EC: EC started [90947.268778] PM: Restoring platform NVS memory [90947.275840] Enabling non-boot CPUs ... [90947.275966] x86: Booting SMP configuration: [90947.275968] smpboot: Booting Node 0 Processor 1 APIC 0x1 [90947.277313] cache: parent cpu1 should not be sleeping [90947.278187] CPU1 is up [90947.278271] smpboot: Booting Node 0 Processor 2 APIC 0x2 [90947.283892] cache: parent cpu2 should not be sleeping [90947.284422] CPU2 is up [90947.284483] smpboot: Booting Node 0 Processor 3 APIC 0x3 [90947.285630] cache: parent cpu3 should not be sleeping [90947.286128] CPU3 is up [90947.295681] ACPI: Waking up from system sleep state S3 [90947.439438] ACPI: EC: interrupt unblocked [90947.482393] ACPI: EC: event unblocked [90947.496902] sd 0:0:0:0: [sda] Starting disk [90947.720620] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [90947.864292] ata5: SATA link down (SStatus 0 SControl 300) [90947.864367] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [90947.864404] ata6: SATA link down (SStatus 0 SControl 300) [90947.864440] ata3: SATA link down (SStatus 0 SControl 300) [90947.864491] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [90947.869650] ata2.00: configured for UDMA/133 [90947.889035] ata1.00: configured for UDMA/133 [90947.996639] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [90949.053357] parport_pc 00:04: activated [90949.075386] acpi LNXPOWER:01: Turning OFF [90949.075464] OOM killer enabled. [90949.075465] Restarting tasks ... [90949.075967] acpi PNP0501:00: Still not present [90949.089476] Bluetooth: hci0: read Intel version: 370710018002030d00 [90949.089754] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [90949.101648] done. [90949.265033] PM: suspend exit [90949.292437] Bluetooth: hci0: unexpected event for opcode 0xfc2f [90949.308455] Bluetooth: hci0: Intel firmware patch completed and activated [90950.303364] geoclue[28993]: segfault at 20 ip 00007fd01ec0adf0 sp 00007ffde8376370 error 6 in libglib-2.0.so.0.6000.4[7fd01ec04000+80000] [90950.303393] Code: fb 48 d1 ea 48 8d 04 92 48 83 ec 08 48 8d 04 42 48 89 fa 48 29 c2 48 8d 05 fd d7 0f 00 48 8d 2c 90 66 0f 1f 84 00 00 00 00 00 44 0f ab 2b 72 11 48 83 c4 08 5b 5d 41 5c 41 5d c3 66 0f 1f 44 [90950.452430] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [90950.488094] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [90953.752713] wlo1: authenticate with 94:91:7f:c5:8e:f6 [90953.755366] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [90953.758534] wlo1: authenticated [90953.760295] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [90953.762430] wlo1: RX AssocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=2) [90953.764600] wlo1: associated [90953.794745] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [90953.796493] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [91123.627447] e1000e: enp0s25 NIC Link is Down [91123.958342] PM: suspend entry (deep) [91123.958344] PM: Syncing filesystems ... done. [91123.965970] Freezing user space processes ... (elapsed 0.002 seconds) done. [91123.968611] OOM killer disabled. [91123.968611] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [91123.970112] printk: Suspending console(s) (use no_console_suspend to debug) [91123.973528] wlo1: deauthenticating from 94:91:7f:c5:8e:f6 by local choice (Reason: 3=DEAUTH_LEAVING) [91123.999106] sd 0:0:0:0: [sda] Synchronizing SCSI cache [91124.003081] sd 0:0:0:0: [sda] Stopping disk [91124.072250] parport_pc 00:04: disabled [91124.072560] e1000e: EEE TX LPI TIMER: 00000011 [91124.368547] ACPI: EC: interrupt blocked [91124.388131] ACPI: Preparing to enter system sleep state S3 [91124.391050] ACPI: EC: event blocked [91124.391051] ACPI: EC: EC stopped [91124.391053] PM: Saving platform NVS memory [91124.391078] Disabling non-boot CPUs ... [91124.391909] IRQ 33: no longer affine to CPU1 [91124.393614] smpboot: CPU 1 is now offline [91124.397973] IRQ 31: no longer affine to CPU2 [91124.399294] smpboot: CPU 2 is now offline [91124.402319] smpboot: CPU 3 is now offline [91124.408160] ACPI: Low-level resume complete [91124.408256] ACPI: EC: EC started [91124.408257] PM: Restoring platform NVS memory [91124.415306] Enabling non-boot CPUs ... [91124.415393] x86: Booting SMP configuration: [91124.415396] smpboot: Booting Node 0 Processor 1 APIC 0x1 [91124.416817] cache: parent cpu1 should not be sleeping [91124.417694] CPU1 is up [91124.417844] smpboot: Booting Node 0 Processor 2 APIC 0x2 [91124.423494] cache: parent cpu2 should not be sleeping [91124.424002] CPU2 is up [91124.424058] smpboot: Booting Node 0 Processor 3 APIC 0x3 [91124.425256] cache: parent cpu3 should not be sleeping [91124.425823] CPU3 is up [91124.435411] ACPI: Waking up from system sleep state S3 [91124.577635] ACPI: EC: interrupt unblocked [91124.619646] ACPI: EC: event unblocked [91124.630298] sd 0:0:0:0: [sda] Starting disk [91124.855103] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [91124.994280] ata3: SATA link down (SStatus 0 SControl 300) [91124.994322] ata5: SATA link down (SStatus 0 SControl 300) [91124.994370] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [91124.994419] ata6: SATA link down (SStatus 0 SControl 300) [91124.994463] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [91124.999349] ata2.00: configured for UDMA/133 [91125.019010] ata1.00: configured for UDMA/133 [91125.131025] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [91126.192268] parport_pc 00:04: activated [91126.215169] acpi LNXPOWER:01: Turning OFF [91126.215264] OOM killer enabled. [91126.215265] Restarting tasks ... [91126.215709] acpi PNP0501:00: Still not present [91126.230730] done. [91126.231884] Bluetooth: hci0: read Intel version: 370710018002030d00 [91126.231897] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [91126.397728] PM: suspend exit [91126.435822] Bluetooth: hci0: unexpected event for opcode 0xfc2f [91126.451871] Bluetooth: hci0: Intel firmware patch completed and activated [91127.502619] geoclue[19496]: segfault at 20 ip 00007f36dc435df0 sp 00007ffd5f949d80 error 6 in libglib-2.0.so.0.6000.4[7f36dc42f000+80000] [91127.502644] Code: fb 48 d1 ea 48 8d 04 92 48 83 ec 08 48 8d 04 42 48 89 fa 48 29 c2 48 8d 05 fd d7 0f 00 48 8d 2c 90 66 0f 1f 84 00 00 00 00 00 44 0f ab 2b 72 11 48 83 c4 08 5b 5d 41 5c 41 5d c3 66 0f 1f 44 [91127.593270] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [91127.628659] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [91128.744482] dnssec-triggerd[28681]: segfault at 30 ip 0000555f56498c90 sp 00007ffeca3fffa0 error 4 in dnssec-triggerd[555f56489000+18000] [91128.744489] Code: 89 d6 55 53 48 89 fb 4c 89 e7 e8 db 06 ff ff 48 8b 1b 48 85 db 74 3b 48 89 c5 eb 0e 66 0f 1f 44 00 00 48 8b 1b 48 85 db 74 28 <48> 3b 6b 10 75 f2 48 8b 7b 08 48 89 ea 4c 89 e6 e8 8b 05 ff ff 85 [91130.982900] wlo1: authenticate with 94:91:7f:c5:8e:f6 [91130.985436] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [91130.988817] wlo1: authenticated [91130.997033] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [91130.999715] wlo1: RX AssocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=2) [91131.001526] wlo1: associated [91131.023882] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [91131.067811] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [93127.679803] usb 3-9: new high-speed USB device number 32 using xhci_hcd [93127.831864] usb 3-9: New USB device found, idVendor=1bcf, idProduct=0c31, bcdDevice= 1.0f [93127.831870] usb 3-9: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [93127.831873] usb 3-9: Product: USB to Serial-ATA bridge [93127.831876] usb 3-9: Manufacturer: Sunplus Innovation Technology. [93127.831879] usb 3-9: SerialNumber: FF3400832A0000000000003FF0F6FF [93127.832234] usb 3-9: Device is not authorized for usage [93131.018496] usb 3-9: authorized to connect [93131.026130] usb-storage 3-9:1.0: USB Mass Storage device detected [93131.027335] scsi host6: usb-storage 3-9:1.0 [93131.027525] usbcore: registered new interface driver usb-storage [93131.031323] usbcore: registered new interface driver uas [93132.039644] scsi 6:0:0:0: Direct-Access ST340083 2AS PQ: 0 ANSI: 4 [93132.040634] sd 6:0:0:0: Attached scsi generic sg2 type 0 [93132.041254] sd 6:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/373 GiB) [93132.047566] sd 6:0:0:0: [sdb] Write Protect is off [93132.047568] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00 [93132.053802] sd 6:0:0:0: [sdb] No Caching mode page found [93132.053816] sd 6:0:0:0: [sdb] Assuming drive cache: write through [93132.107939] sd 6:0:0:0: [sdb] Attached SCSI disk [93206.628951] EXT4-fs (dm-4): mounting ext3 file system using the ext4 subsystem [93206.637285] EXT4-fs (dm-4): warning: mounting fs with errors, running e2fsck is recommended [93206.639139] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [93522.622883] EXT4-fs (dm-4): error count since last fsck: 60 [93522.622886] EXT4-fs (dm-4): initial error at time 1506302334: ext4_mb_generate_buddy:758 [93522.622887] EXT4-fs (dm-4): last error at time 1549327150: ext4_mb_generate_buddy:756 [95034.013434] EXT4-fs error (device dm-4): ext4_mb_generate_buddy:747: group 858, block bitmap and bg descriptor inconsistent: 1534 vs 32254 free clusters [95034.034682] EXT4-fs error (device dm-4): ext4_mb_generate_buddy:747: group 859, block bitmap and bg descriptor inconsistent: 1534 vs 32254 free clusters [95034.041245] EXT4-fs error (device dm-4): ext4_mb_generate_buddy:747: group 860, block bitmap and bg descriptor inconsistent: 1534 vs 32254 free clusters [95034.053159] EXT4-fs error (device dm-4): ext4_mb_generate_buddy:747: group 861, block bitmap and bg descriptor inconsistent: 1534 vs 32254 free clusters [95034.060932] EXT4-fs error (device dm-4): ext4_mb_generate_buddy:747: group 862, block bitmap and bg descriptor inconsistent: 1534 vs 32254 free clusters [95034.073925] EXT4-fs error (device dm-4): ext4_mb_generate_buddy:747: group 863, block bitmap and bg descriptor inconsistent: 1534 vs 32254 free clusters [95034.086944] EXT4-fs error (device dm-4): ext4_mb_generate_buddy:747: group 864, block bitmap and bg descriptor inconsistent: 1534 vs 32254 free clusters [95034.095465] EXT4-fs error (device dm-4): ext4_mb_generate_buddy:747: group 865, block bitmap and bg descriptor inconsistent: 1534 vs 32254 free clusters [95034.106480] EXT4-fs error (device dm-4): ext4_mb_generate_buddy:747: group 866, block bitmap and bg descriptor inconsistent: 1534 vs 32254 free clusters [95034.132856] EXT4-fs error (device dm-4): ext4_mb_generate_buddy:747: group 867, block bitmap and bg descriptor inconsistent: 1534 vs 32254 free clusters [95039.781824] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 5300) [95039.781825] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 5300) [95039.781826] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 5300) [95039.781828] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 5300) [95039.781830] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 5300) [95039.781833] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 5300) [95039.782827] mce: CPU0: Core temperature/speed normal [95039.782828] mce: CPU3: Package temperature/speed normal [95039.782829] mce: CPU2: Package temperature/speed normal [95039.782830] mce: CPU1: Core temperature/speed normal [95039.782832] mce: CPU1: Package temperature/speed normal [95039.782832] mce: CPU0: Package temperature/speed normal [129056.523395] usb 3-9: USB disconnect, device number 32 [183785.109983] e1000e: enp0s25 NIC Link is Down [183785.375060] PM: suspend entry (deep) [183785.375063] PM: Syncing filesystems ... done. [183785.384327] Freezing user space processes ... (elapsed 0.002 seconds) done. [183785.386515] OOM killer disabled. [183785.386515] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [183785.387929] printk: Suspending console(s) (use no_console_suspend to debug) [183785.388402] wlo1: deauthenticating from 94:91:7f:c5:8e:f6 by local choice (Reason: 3=DEAUTH_LEAVING) [183785.406669] sd 0:0:0:0: [sda] Synchronizing SCSI cache [183785.406728] sd 0:0:0:0: [sda] Stopping disk [183785.486464] parport_pc 00:04: disabled [183785.486960] e1000e: EEE TX LPI TIMER: 00000011 [183785.640016] ACPI: EC: interrupt blocked [183785.659479] ACPI: Preparing to enter system sleep state S3 [183785.662835] ACPI: EC: event blocked [183785.662837] ACPI: EC: EC stopped [183785.662839] PM: Saving platform NVS memory [183785.662866] Disabling non-boot CPUs ... [183785.663736] IRQ 33: no longer affine to CPU1 [183785.664755] smpboot: CPU 1 is now offline [183785.670178] IRQ 31: no longer affine to CPU2 [183785.671390] smpboot: CPU 2 is now offline [183785.673547] IRQ 27: no longer affine to CPU3 [183785.674568] smpboot: CPU 3 is now offline [183785.678790] ACPI: Low-level resume complete [183785.678889] ACPI: EC: EC started [183785.678890] PM: Restoring platform NVS memory [183785.685897] Enabling non-boot CPUs ... [183785.685999] x86: Booting SMP configuration: [183785.686001] smpboot: Booting Node 0 Processor 1 APIC 0x1 [183785.687364] cache: parent cpu1 should not be sleeping [183785.688248] CPU1 is up [183785.688335] smpboot: Booting Node 0 Processor 2 APIC 0x2 [183785.693946] cache: parent cpu2 should not be sleeping [183785.694457] CPU2 is up [183785.694528] smpboot: Booting Node 0 Processor 3 APIC 0x3 [183785.695669] cache: parent cpu3 should not be sleeping [183785.696174] CPU3 is up [183785.705730] ACPI: Waking up from system sleep state S3 [183785.849114] ACPI: EC: interrupt unblocked [183785.890612] ACPI: EC: event unblocked [183785.901171] sd 0:0:0:0: [sda] Starting disk [183786.125690] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [183786.272775] ata5: SATA link down (SStatus 0 SControl 300) [183786.272821] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [183786.272863] ata6: SATA link down (SStatus 0 SControl 300) [183786.272923] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [183786.272989] ata3: SATA link down (SStatus 0 SControl 300) [183786.281148] ata2.00: configured for UDMA/133 [183786.297429] ata1.00: configured for UDMA/133 [183786.401728] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [183787.462365] parport_pc 00:04: activated [183787.484528] acpi LNXPOWER:01: Turning OFF [183787.484601] OOM killer enabled. [183787.484603] Restarting tasks ... [183787.485037] acpi PNP0501:00: Still not present [183787.496556] Bluetooth: hci0: read Intel version: 370710018002030d00 [183787.497606] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [183787.514839] done. [183787.668929] PM: suspend exit [183787.700526] Bluetooth: hci0: unexpected event for opcode 0xfc2f [183787.716574] Bluetooth: hci0: Intel firmware patch completed and activated [183788.862044] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [183788.896295] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [183792.188700] wlo1: authenticate with 68:ff:7b:72:c0:f9 [183792.191558] wlo1: send auth to 68:ff:7b:72:c0:f9 (try 1/3) [183792.192579] wlo1: authenticated [183792.193255] wlo1: associate with 68:ff:7b:72:c0:f9 (try 1/3) [183792.194128] wlo1: RX AssocResp from 68:ff:7b:72:c0:f9 (capab=0x11 status=0 aid=1) [183792.195316] wlo1: associated [183792.437515] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [185393.764226] e1000e: enp0s25 NIC Link is Down [185394.058597] PM: suspend entry (deep) [185394.058599] PM: Syncing filesystems ... done. [185394.065794] Freezing user space processes ... (elapsed 0.002 seconds) done. [185394.068159] OOM killer disabled. [185394.068160] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [185394.069474] printk: Suspending console(s) (use no_console_suspend to debug) [185394.069960] wlo1: deauthenticating from 68:ff:7b:72:c0:f9 by local choice (Reason: 3=DEAUTH_LEAVING) [185394.088960] sd 0:0:0:0: [sda] Synchronizing SCSI cache [185394.089098] sd 0:0:0:0: [sda] Stopping disk [185394.167038] parport_pc 00:04: disabled [185394.167402] e1000e: EEE TX LPI TIMER: 00000011 [185394.321974] ACPI: EC: interrupt blocked [185394.341626] ACPI: Preparing to enter system sleep state S3 [185394.344503] ACPI: EC: event blocked [185394.344504] ACPI: EC: EC stopped [185394.344506] PM: Saving platform NVS memory [185394.344530] Disabling non-boot CPUs ... [185394.345450] IRQ 33: no longer affine to CPU1 [185394.346469] smpboot: CPU 1 is now offline [185394.351210] IRQ 31: no longer affine to CPU2 [185394.352218] smpboot: CPU 2 is now offline [185394.355101] smpboot: CPU 3 is now offline [185394.358933] ACPI: Low-level resume complete [185394.359029] ACPI: EC: EC started [185394.359030] PM: Restoring platform NVS memory [185394.366082] Enabling non-boot CPUs ... [185394.366186] x86: Booting SMP configuration: [185394.366189] smpboot: Booting Node 0 Processor 1 APIC 0x1 [185394.367549] cache: parent cpu1 should not be sleeping [185394.368415] CPU1 is up [185394.368516] smpboot: Booting Node 0 Processor 2 APIC 0x2 [185394.374121] cache: parent cpu2 should not be sleeping [185394.374627] CPU2 is up [185394.374684] smpboot: Booting Node 0 Processor 3 APIC 0x3 [185394.375900] cache: parent cpu3 should not be sleeping [185394.376414] CPU3 is up [185394.385935] ACPI: Waking up from system sleep state S3 [185394.526697] ACPI: EC: interrupt unblocked [185394.569173] ACPI: EC: event unblocked [185394.580396] sd 0:0:0:0: [sda] Starting disk [185394.803918] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [185394.911077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [185394.915896] ata2.00: configured for UDMA/133 [185394.946907] ata6: SATA link down (SStatus 0 SControl 300) [185394.946950] ata5: SATA link down (SStatus 0 SControl 300) [185394.946991] ata3: SATA link down (SStatus 0 SControl 300) [185394.947036] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [185394.971579] ata1.00: configured for UDMA/133 [185395.083839] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [185396.144492] parport_pc 00:04: activated [185396.166883] acpi LNXPOWER:01: Turning OFF [185396.166982] OOM killer enabled. [185396.166984] Restarting tasks ... [185396.167387] acpi PNP0501:00: Still not present [185396.179642] Bluetooth: hci0: read Intel version: 370710018002030d00 [185396.179657] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [185396.211447] done. [185396.337393] PM: suspend exit [185396.387629] Bluetooth: hci0: unexpected event for opcode 0xfc2f [185396.403657] Bluetooth: hci0: Intel firmware patch completed and activated [185397.568069] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [185397.607210] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [185400.784176] wlo1: authenticate with 68:ff:7b:72:c0:f9 [185400.786657] wlo1: send auth to 68:ff:7b:72:c0:f9 (try 1/3) [185400.787805] wlo1: authenticated [185400.791381] wlo1: associate with 68:ff:7b:72:c0:f9 (try 1/3) [185400.792332] wlo1: RX AssocResp from 68:ff:7b:72:c0:f9 (capab=0x11 status=0 aid=2) [185400.792936] wlo1: associated [185401.066501] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [188958.126668] e1000e: enp0s25 NIC Link is Down [188958.394144] PM: suspend entry (deep) [188958.394147] PM: Syncing filesystems ... done. [188958.399978] Freezing user space processes ... (elapsed 0.002 seconds) done. [188958.402137] OOM killer disabled. [188958.402137] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [188958.403476] printk: Suspending console(s) (use no_console_suspend to debug) [188958.404123] wlo1: deauthenticating from 68:ff:7b:72:c0:f9 by local choice (Reason: 3=DEAUTH_LEAVING) [188958.427855] sd 0:0:0:0: [sda] Synchronizing SCSI cache [188958.428215] sd 0:0:0:0: [sda] Stopping disk [188958.502252] parport_pc 00:04: disabled [188958.502653] e1000e: EEE TX LPI TIMER: 00000011 [188958.656628] ACPI: EC: interrupt blocked [188958.676691] ACPI: Preparing to enter system sleep state S3 [188958.679713] ACPI: EC: event blocked [188958.679715] ACPI: EC: EC stopped [188958.679716] PM: Saving platform NVS memory [188958.679830] Disabling non-boot CPUs ... [188958.680650] IRQ 33: no longer affine to CPU1 [188958.682442] smpboot: CPU 1 is now offline [188958.686823] IRQ 31: no longer affine to CPU2 [188958.688625] smpboot: CPU 2 is now offline [188958.693356] smpboot: CPU 3 is now offline [188958.699160] ACPI: Low-level resume complete [188958.699254] ACPI: EC: EC started [188958.699256] PM: Restoring platform NVS memory [188958.706352] Enabling non-boot CPUs ... [188958.706445] x86: Booting SMP configuration: [188958.706448] smpboot: Booting Node 0 Processor 1 APIC 0x1 [188958.707826] cache: parent cpu1 should not be sleeping [188958.708689] CPU1 is up [188958.708777] smpboot: Booting Node 0 Processor 2 APIC 0x2 [188958.714386] cache: parent cpu2 should not be sleeping [188958.714897] CPU2 is up [188958.714970] smpboot: Booting Node 0 Processor 3 APIC 0x3 [188958.716151] cache: parent cpu3 should not be sleeping [188958.716661] CPU3 is up [188958.726186] ACPI: Waking up from system sleep state S3 [188958.870182] ACPI: EC: interrupt unblocked [188958.908101] ACPI: EC: event unblocked [188958.919002] sd 0:0:0:0: [sda] Starting disk [188959.147391] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [188959.278478] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [188959.278523] ata3: SATA link down (SStatus 0 SControl 300) [188959.278569] ata5: SATA link down (SStatus 0 SControl 300) [188959.278626] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [188959.278672] ata6: SATA link down (SStatus 0 SControl 300) [188959.285323] ata2.00: configured for UDMA/133 [188959.302979] ata1.00: configured for UDMA/133 [188959.423234] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [188960.483971] parport_pc 00:04: activated [188960.504597] acpi LNXPOWER:01: Turning OFF [188960.504673] OOM killer enabled. [188960.504674] Restarting tasks ... [188960.505230] acpi PNP0501:00: Still not present [188960.518285] Bluetooth: hci0: read Intel version: 370710018002030d00 [188960.518654] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [188960.535860] done. [188960.701959] PM: suspend exit [188960.721231] Bluetooth: hci0: unexpected event for opcode 0xfc2f [188960.737273] Bluetooth: hci0: Intel firmware patch completed and activated [188961.881294] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [188961.916414] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [188962.874896] dnssec-triggerd[20249]: segfault at 617082 ip 0000558354ccbc90 sp 00007ffcad79bc80 error 4 in dnssec-triggerd[558354cbc000+18000] [188962.874903] Code: 89 d6 55 53 48 89 fb 4c 89 e7 e8 db 06 ff ff 48 8b 1b 48 85 db 74 3b 48 89 c5 eb 0e 66 0f 1f 44 00 00 48 8b 1b 48 85 db 74 28 <48> 3b 6b 10 75 f2 48 8b 7b 08 48 89 ea 4c 89 e6 e8 8b 05 ff ff 85 [188964.946776] wlo1: authenticate with 68:ff:7b:72:c0:f9 [188964.949257] wlo1: send auth to 68:ff:7b:72:c0:f9 (try 1/3) [188964.950217] wlo1: authenticated [188964.951038] wlo1: associate with 68:ff:7b:72:c0:f9 (try 1/3) [188964.951893] wlo1: RX AssocResp from 68:ff:7b:72:c0:f9 (capab=0x11 status=0 aid=2) [188964.953163] wlo1: associated [188965.250651] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [188966.236010] traps: dnssec-triggerd[9979] general protection fault ip:55f09f075c90 sp:7fff2e399910 error:0 in dnssec-triggerd[55f09f066000+18000] [191502.794550] e1000e: enp0s25 NIC Link is Down [191503.085813] PM: suspend entry (deep) [191503.085815] PM: Syncing filesystems ... done. [191503.092281] Freezing user space processes ... (elapsed 0.002 seconds) done. [191503.094685] OOM killer disabled. [191503.094685] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [191503.095718] printk: Suspending console(s) (use no_console_suspend to debug) [191503.096178] wlo1: deauthenticating from 68:ff:7b:72:c0:f9 by local choice (Reason: 3=DEAUTH_LEAVING) [191503.115719] sd 0:0:0:0: [sda] Synchronizing SCSI cache [191503.115833] sd 0:0:0:0: [sda] Stopping disk [191503.192919] parport_pc 00:04: disabled [191503.193354] e1000e: EEE TX LPI TIMER: 00000011 [191503.348878] ACPI: EC: interrupt blocked [191503.368577] ACPI: Preparing to enter system sleep state S3 [191503.371975] ACPI: EC: event blocked [191503.371977] ACPI: EC: EC stopped [191503.371978] PM: Saving platform NVS memory [191503.372006] Disabling non-boot CPUs ... [191503.372857] IRQ 33: no longer affine to CPU1 [191503.374646] smpboot: CPU 1 is now offline [191503.378620] IRQ 31: no longer affine to CPU2 [191503.380457] smpboot: CPU 2 is now offline [191503.385240] smpboot: CPU 3 is now offline [191503.390821] ACPI: Low-level resume complete [191503.390917] ACPI: EC: EC started [191503.390918] PM: Restoring platform NVS memory [191503.397935] Enabling non-boot CPUs ... [191503.398046] x86: Booting SMP configuration: [191503.398049] smpboot: Booting Node 0 Processor 1 APIC 0x1 [191503.399480] cache: parent cpu1 should not be sleeping [191503.400356] CPU1 is up [191503.400429] smpboot: Booting Node 0 Processor 2 APIC 0x2 [191503.406036] cache: parent cpu2 should not be sleeping [191503.406536] CPU2 is up [191503.406622] smpboot: Booting Node 0 Processor 3 APIC 0x3 [191503.407775] cache: parent cpu3 should not be sleeping [191503.408280] CPU3 is up [191503.417870] ACPI: Waking up from system sleep state S3 [191503.562176] ACPI: EC: interrupt unblocked [191503.604102] ACPI: EC: event unblocked [191503.614915] sd 0:0:0:0: [sda] Starting disk [191503.839044] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [191503.978827] ata3: SATA link down (SStatus 0 SControl 300) [191503.978876] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [191503.978930] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [191503.978976] ata6: SATA link down (SStatus 0 SControl 300) [191503.979009] ata5: SATA link down (SStatus 0 SControl 300) [191503.985232] ata2.00: configured for UDMA/133 [191504.003532] ata1.00: configured for UDMA/133 [191504.115268] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [191505.179892] parport_pc 00:04: activated [191505.200280] acpi LNXPOWER:01: Turning OFF [191505.200359] OOM killer enabled. [191505.200361] Restarting tasks ... [191505.200757] acpi PNP0501:00: Still not present [191505.222830] done. [191505.225934] Bluetooth: hci0: read Intel version: 370710018002030d00 [191505.225947] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [191505.395633] PM: suspend exit [191505.439891] Bluetooth: hci0: unexpected event for opcode 0xfc2f [191505.455934] Bluetooth: hci0: Intel firmware patch completed and activated [191506.601511] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [191506.635927] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [191509.862658] wlo1: authenticate with 68:ff:7b:72:c0:f9 [191509.865203] wlo1: send auth to 68:ff:7b:72:c0:f9 (try 1/3) [191509.866125] wlo1: authenticated [191509.867183] wlo1: associate with 68:ff:7b:72:c0:f9 (try 1/3) [191509.868015] wlo1: RX AssocResp from 68:ff:7b:72:c0:f9 (capab=0x11 status=0 aid=2) [191509.869266] wlo1: associated [191510.080155] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [191723.151319] e1000e: enp0s25 NIC Link is Down [191724.333204] PM: suspend entry (deep) [191724.333209] PM: Syncing filesystems ... done. [191724.357322] Freezing user space processes ... (elapsed 0.006 seconds) done. [191724.363991] OOM killer disabled. [191724.363993] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [191724.365744] printk: Suspending console(s) (use no_console_suspend to debug) [191724.367006] wlo1: deauthenticating from 68:ff:7b:72:c0:f9 by local choice (Reason: 3=DEAUTH_LEAVING) [191724.383864] sd 0:0:0:0: [sda] Synchronizing SCSI cache [191724.384264] sd 0:0:0:0: [sda] Stopping disk [191724.464214] parport_pc 00:04: disabled [191724.464671] e1000e: EEE TX LPI TIMER: 00000011 [191724.765088] ACPI: EC: interrupt blocked [191724.784557] ACPI: Preparing to enter system sleep state S3 [191724.788012] ACPI: EC: event blocked [191724.788014] ACPI: EC: EC stopped [191724.788016] PM: Saving platform NVS memory [191724.788041] Disabling non-boot CPUs ... [191724.788722] IRQ 33: no longer affine to CPU1 [191724.790527] smpboot: CPU 1 is now offline [191724.794372] IRQ 31: no longer affine to CPU2 [191724.795385] smpboot: CPU 2 is now offline [191724.798341] smpboot: CPU 3 is now offline [191724.802518] ACPI: Low-level resume complete [191724.802615] ACPI: EC: EC started [191724.802616] PM: Restoring platform NVS memory [191724.809723] Enabling non-boot CPUs ... [191724.809807] x86: Booting SMP configuration: [191724.809809] smpboot: Booting Node 0 Processor 1 APIC 0x1 [191724.811234] cache: parent cpu1 should not be sleeping [191724.812089] CPU1 is up [191724.812159] smpboot: Booting Node 0 Processor 2 APIC 0x2 [191724.817808] cache: parent cpu2 should not be sleeping [191724.818337] CPU2 is up [191724.818417] smpboot: Booting Node 0 Processor 3 APIC 0x3 [191724.819608] cache: parent cpu3 should not be sleeping [191724.820123] CPU3 is up [191724.829654] ACPI: Waking up from system sleep state S3 [191724.973800] ACPI: EC: interrupt unblocked [191725.016683] ACPI: EC: event unblocked [191725.027242] sd 0:0:0:0: [sda] Starting disk [191725.250786] usb 3-12: reset full-speed USB device number 3 using xhci_hcd [191725.390418] ata6: SATA link down (SStatus 0 SControl 300) [191725.390571] ata3: SATA link down (SStatus 0 SControl 300) [191725.390636] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [191725.390692] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [191725.390727] ata5: SATA link down (SStatus 0 SControl 300) [191725.397035] ata2.00: configured for UDMA/133 [191725.415266] ata1.00: configured for UDMA/133 [191725.526813] usb 3-5: reset full-speed USB device number 2 using xhci_hcd [191726.583558] parport_pc 00:04: activated [191726.603998] acpi LNXPOWER:01: Turning OFF [191726.604075] OOM killer enabled. [191726.604076] Restarting tasks ... [191726.604527] acpi PNP0501:00: Still not present [191726.616740] Bluetooth: hci0: read Intel version: 370710018002030d00 [191726.617031] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [191726.645699] done. [191726.802901] PM: suspend exit [191726.819702] Bluetooth: hci0: unexpected event for opcode 0xfc2f [191726.835740] Bluetooth: hci0: Intel firmware patch completed and activated [191727.986829] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826] [191728.022935] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..] [191729.151720] dnssec-triggerd[10340]: segfault at 40 ip 000055655c5d7c90 sp 00007ffe87df0d90 error 4 in dnssec-triggerd[55655c5c8000+18000] [191729.151727] Code: 89 d6 55 53 48 89 fb 4c 89 e7 e8 db 06 ff ff 48 8b 1b 48 85 db 74 3b 48 89 c5 eb 0e 66 0f 1f 44 00 00 48 8b 1b 48 85 db 74 28 <48> 3b 6b 10 75 f2 48 8b 7b 08 48 89 ea 4c 89 e6 e8 8b 05 ff ff 85 [191731.320075] wlo1: authenticate with 94:91:7f:c5:8e:f6 [191731.322699] wlo1: send auth to 94:91:7f:c5:8e:f6 (try 1/3) [191731.325986] wlo1: authenticated [191731.326303] wlo1: associate with 94:91:7f:c5:8e:f6 (try 1/3) [191731.328433] wlo1: RX AssocResp from 94:91:7f:c5:8e:f6 (capab=0x1511 status=0 aid=2) [191731.329916] wlo1: associated [191731.338773] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 94:91:7f:c5:8e:f6 [191731.352725] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [191732.177880] traps: dnssec-triggerd[14767] general protection fault ip:55a7ac521c90 sp:7ffe5c67d140 error:0 in dnssec-triggerd[55a7ac512000+18000]