[ 0.000000] Linux version 4.18.0-12-lowlatency (buildd@lgw01-amd64-033) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #13-Ubuntu SMP PREEMPT Wed Nov 14 18:08:48 UTC 2018 (Ubuntu 4.18.0-12.13-lowlatency 4.18.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-12-lowlatency root=UUID=a967adb1-1600-455b-8704-e2bf5de5081d ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000937ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000093800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cbf4ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffbdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cffbe000-0x00000000cffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: BIOSTAR Group A880G+/A880G+, BIOS 080016 09/21/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xcbf50 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(____ptrval____)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 8d000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x17fd93000, 0x17fd93fff] PGTABLE [ 0.000000] BRK [0x17fd94000, 0x17fd94fff] PGTABLE [ 0.000000] BRK [0x17fd95000, 0x17fd95fff] PGTABLE [ 0.000000] BRK [0x17fd96000, 0x17fd96fff] PGTABLE [ 0.000000] BRK [0x17fd97000, 0x17fd97fff] PGTABLE [ 0.000000] BRK [0x17fd98000, 0x17fd98fff] PGTABLE [ 0.000000] BRK [0x17fd99000, 0x17fd99fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3300d000-0x357fdfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB060 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x00000000CFFB0000 000040 (v01 092111 RSDT1800 20110921 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000CFFB0200 000084 (v01 092111 FACP1800 20110921 MSFT 00000097) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180531/tbfadt-624) [ 0.000000] ACPI: DSDT 0x00000000CFFB0450 00A1E4 (v01 88PCP 88PCP921 00000002 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000CFFBE000 000040 [ 0.000000] ACPI: APIC 0x00000000CFFB0390 00007C (v01 092111 APIC1800 20110921 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000CFFB0410 00003C (v01 092111 OEMMCFG 20110921 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000CFFBE040 000072 (v01 092111 OEMB1800 20110921 MSFT 00000097) [ 0.000000] ACPI: SRAT 0x00000000CFFBA640 0000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 0x00000000CFFBA730 000038 (v01 092111 OEMHPET 20110921 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000CFFBA770 00088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff] [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x22fffffff] -> [mem 0x00000000-0x22fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22ffd5000-0x22fffffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000092fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cbf4ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Reserved but unavailable: 16670 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff] [ 0.000000] On node 0 totalpages: 2080482 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3986 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12990 pages used for memmap [ 0.000000] DMA32 zone: 831312 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1245184 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00093000-0x00093fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00094000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcbf50000-0xcffaffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffb0000-0xcffbdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffbe000-0xcffdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.000000] [mem 0xd0000000-0xffefffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x561 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2047951 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-12-lowlatency root=UUID=a967adb1-1600-455b-8704-e2bf5de5081d ro quiet splash [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xc0000000-0xc1ffffff] (32MB) [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xc0000000-0xc3ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc3ffffff] [ 0.000000] Memory: 7986720K/8321928K available (14348K kernel code, 2902K rwdata, 4352K rodata, 2376K init, 2352K bss, 335208K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] ftrace: allocating 40854 entries in 160 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 524544, nr_irqs: 472, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.005000] tsc: Fast TSC calibration using PIT [ 0.006000] tsc: Detected 3300.253 MHz processor [ 0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f923b87fac, max_idle_ns: 440795316228 ns [ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6600.50 BogoMIPS (lpj=3300253) [ 0.006000] pid_max: default: 32768 minimum: 301 [ 0.006000] Security Framework initialized [ 0.006000] Yama: becoming mindful. [ 0.006000] AppArmor: AppArmor initialized [ 0.009120] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010239] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010296] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.010332] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.010561] mce: CPU supports 6 MCE banks [ 0.010569] LVT offset 0 assigned for vector 0xf9 [ 0.010572] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.010573] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.010575] Spectre V2 : Mitigation: Full AMD retpoline [ 0.010575] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.017117] Freeing SMP alternatives memory: 36K [ 0.019000] smpboot: CPU0: AMD Phenom(tm) II X4 850 Processor (family: 0x10, model: 0x5, stepping: 0x3) [ 0.024028] Performance Events: AMD PMU driver. [ 0.024034] ... version: 0 [ 0.024034] ... bit width: 48 [ 0.024035] ... generic registers: 4 [ 0.024036] ... value mask: 0000ffffffffffff [ 0.024036] ... max period: 00007fffffffffff [ 0.024037] ... fixed-purpose events: 0 [ 0.024037] ... event mask: 000000000000000f [ 0.026014] Hierarchical SRCU implementation. [ 0.030127] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.032014] smp: Bringing up secondary CPUs ... [ 0.042038] x86: Booting SMP configuration: [ 0.042040] .... node #0, CPUs: #1 #2 #3 [ 0.065035] smp: Brought up 1 node, 4 CPUs [ 0.065035] smpboot: Max logical packages: 2 [ 0.065035] smpboot: Total of 4 processors activated (26402.02 BogoMIPS) [ 0.066090] devtmpfs: initialized [ 0.066090] x86/mm: Memory block size: 128MB [ 0.067078] PM: Registering ACPI NVS region [mem 0xcffbe000-0xcffdffff] (139264 bytes) [ 0.067164] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.067164] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.067164] pinctrl core: initialized pinctrl subsystem [ 0.067250] RTC time: 13:01:36, date: 12/19/18 [ 0.067398] NET: Registered protocol family 16 [ 0.067492] audit: initializing netlink subsys (disabled) [ 0.068040] audit: type=2000 audit(1545224496.068:1): state=initialized audit_enabled=0 res=1 [ 0.068192] cpuidle: using governor ladder [ 0.068192] cpuidle: using governor menu [ 0.068192] node 0 link 0: io port [1000, ffffff] [ 0.068192] TOM: 00000000d0000000 aka 3328M [ 0.068192] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.068192] node 0 link 0: mmio [a0000, bffff] [ 0.068192] node 0 link 0: mmio [d0000000, dfffffff] [ 0.068192] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.068192] node 0 link 0: mmio [f0000000, ffefffff] [ 0.068192] TOM2: 0000000230000000 aka 8960M [ 0.068192] bus: [bus 00-07] on node 0 link 0 [ 0.068192] bus: 00 [io 0x0000-0xffff] [ 0.068192] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.068192] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.068192] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.068192] bus: 00 [mem 0x230000000-0xfcffffffff] [ 0.068192] ACPI: bus type PCI registered [ 0.068192] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.068192] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.068192] PCI: not using MMCONFIG [ 0.068192] PCI: Using configuration type 1 for base access [ 0.068192] PCI: Using configuration type 1 for extended access [ 0.069181] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.069182] mtrr: probably your BIOS does not setup all CPUs. [ 0.069183] mtrr: corrected configuration. [ 0.070165] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.070165] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.071131] ACPI: Added _OSI(Module Device) [ 0.071132] ACPI: Added _OSI(Processor Device) [ 0.071133] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.071134] ACPI: Added _OSI(Processor Aggregator Device) [ 0.071135] ACPI: Added _OSI(Linux-Dell-Video) [ 0.071135] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.077904] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.080721] ACPI: Interpreter enabled [ 0.080742] ACPI: (supports S0 S1 S4 S5) [ 0.080744] ACPI: Using IOAPIC for interrupt routing [ 0.080785] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.082610] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.082626] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.083181] ACPI: Enabled 7 GPEs in block 00 to 1F [ 0.091866] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.091872] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.091877] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.092229] PCI host bridge to bus 0000:00 [ 0.092231] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.092232] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.092234] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.092235] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.092236] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window] [ 0.092237] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.092238] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.092247] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.092360] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.092375] pci 0000:00:02.0: enabling Extended Tags [ 0.092396] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.092478] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400 [ 0.092493] pci 0000:00:07.0: enabling Extended Tags [ 0.092512] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.092605] pci 0000:00:11.0: [1002:4392] type 00 class 0x010400 [ 0.092625] pci 0000:00:11.0: reg 0x10: [io 0xb000-0xb007] [ 0.092634] pci 0000:00:11.0: reg 0x14: [io 0xa000-0xa003] [ 0.092642] pci 0000:00:11.0: reg 0x18: [io 0x9000-0x9007] [ 0.092650] pci 0000:00:11.0: reg 0x1c: [io 0x8000-0x8003] [ 0.092658] pci 0000:00:11.0: reg 0x20: [io 0x7000-0x700f] [ 0.092667] pci 0000:00:11.0: reg 0x24: [mem 0xfeaffc00-0xfeafffff] [ 0.092784] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.092800] pci 0000:00:12.0: reg 0x10: [mem 0xfeafe000-0xfeafefff] [ 0.092933] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.092949] pci 0000:00:12.1: reg 0x10: [mem 0xfeafd000-0xfeafdfff] [ 0.093089] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.093108] pci 0000:00:12.2: reg 0x10: [mem 0xfeaff800-0xfeaff8ff] [ 0.093182] pci 0000:00:12.2: supports D1 D2 [ 0.093183] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.093276] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.093292] pci 0000:00:13.0: reg 0x10: [mem 0xfeafc000-0xfeafcfff] [ 0.093421] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.093437] pci 0000:00:13.1: reg 0x10: [mem 0xfeafb000-0xfeafbfff] [ 0.093565] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.093584] pci 0000:00:13.2: reg 0x10: [mem 0xfeaff400-0xfeaff4ff] [ 0.093658] pci 0000:00:13.2: supports D1 D2 [ 0.093659] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.093752] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.093907] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.093925] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.093933] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.093941] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.093949] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.093957] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] [ 0.093976] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.093977] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.093978] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.093979] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.094090] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.094113] pci 0000:00:14.2: reg 0x10: [mem 0xfeaf4000-0xfeaf7fff 64bit] [ 0.094175] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.094256] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.094392] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.094502] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.094518] pci 0000:00:14.5: reg 0x10: [mem 0xfeafa000-0xfeafafff] [ 0.094648] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.094716] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.094782] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.094853] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.094922] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.095037] pci 0000:01:00.0: [10de:0de0] type 00 class 0x030000 [ 0.095053] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.095062] pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.095070] pci 0000:01:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref] [ 0.095076] pci 0000:01:00.0: reg 0x24: [io 0xc800-0xc87f] [ 0.095082] pci 0000:01:00.0: reg 0x30: [mem 0xfcf80000-0xfcffffff pref] [ 0.095087] pci 0000:01:00.0: enabling Extended Tags [ 0.095168] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300 [ 0.095181] pci 0000:01:00.1: reg 0x10: [mem 0xfcf7c000-0xfcf7ffff] [ 0.095214] pci 0000:01:00.1: enabling Extended Tags [ 0.095297] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.095299] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.095301] pci 0000:00:02.0: bridge window [mem 0xfcf00000-0xfdffffff] [ 0.095304] pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.095337] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.095357] pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff] [ 0.095375] pci 0000:02:00.0: reg 0x18: [mem 0xfbffb000-0xfbffbfff 64bit pref] [ 0.095387] pci 0000:02:00.0: reg 0x20: [mem 0xfbffc000-0xfbffffff 64bit pref] [ 0.095394] pci 0000:02:00.0: reg 0x30: [mem 0xfebe0000-0xfebfffff pref] [ 0.095450] pci 0000:02:00.0: supports D1 D2 [ 0.095451] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.095524] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.095527] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.095528] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.095531] pci 0000:00:07.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.095541] pci_bus 0000:03: extended config space not accessible [ 0.095569] pci 0000:03:06.0: [1102:0006] type 00 class 0x040100 [ 0.095589] pci 0000:03:06.0: reg 0x10: [io 0xe800-0xe81f] [ 0.095680] pci 0000:03:06.0: supports D1 D2 [ 0.095718] pci 0000:03:06.1: [1102:7004] type 00 class 0x098000 [ 0.095736] pci 0000:03:06.1: reg 0x10: [io 0xe400-0xe407] [ 0.095827] pci 0000:03:06.1: supports D1 D2 [ 0.095903] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.095906] pci 0000:00:14.4: bridge window [io 0xe000-0xefff] [ 0.095912] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.095913] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.095914] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.095916] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.095917] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode) [ 0.095918] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.097200] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) [ 0.097259] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.097315] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.097371] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15) [ 0.097428] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.097484] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15) [ 0.097540] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *9 12 14 15) [ 0.097596] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.097970] SCSI subsystem initialized [ 0.098038] libata version 3.00 loaded. [ 0.098051] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.098051] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.098051] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.098051] vgaarb: loaded [ 0.098051] ACPI: bus type USB registered [ 0.098052] usbcore: registered new interface driver usbfs [ 0.098061] usbcore: registered new interface driver hub [ 0.098092] usbcore: registered new device driver usb [ 0.098114] pps_core: LinuxPPS API ver. 1 registered [ 0.098114] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.098116] PTP clock support registered [ 0.098139] EDAC MC: Ver: 3.0.0 [ 0.098165] PCI: Using ACPI for IRQ routing [ 0.107054] PCI: pci_cache_line_size set to 64 bytes [ 0.107113] e820: reserve RAM buffer [mem 0x00093800-0x0009ffff] [ 0.107114] e820: reserve RAM buffer [mem 0xcbf50000-0xcbffffff] [ 0.107239] NetLabel: Initializing [ 0.107239] NetLabel: domain hash size = 128 [ 0.107240] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.107251] NetLabel: unlabeled traffic allowed by default [ 0.107273] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.107273] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.109062] clocksource: Switched to clocksource tsc-early [ 0.122102] VFS: Disk quotas dquot_6.6.0 [ 0.122117] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.122232] AppArmor: AppArmor Filesystem Enabled [ 0.122271] pnp: PnP ACPI init [ 0.122514] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.122576] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.123082] pnp 00:02: [dma 0 disabled] [ 0.123148] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.124057] pnp 00:03: [dma 0 disabled] [ 0.124285] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.124629] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.124631] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.124634] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.124858] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.124860] system 00:05: [io 0x040b] has been reserved [ 0.124861] system 00:05: [io 0x04d6] has been reserved [ 0.124862] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.124863] system 00:05: [io 0x0c14] has been reserved [ 0.124864] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.124865] system 00:05: [io 0x0c52] has been reserved [ 0.124866] system 00:05: [io 0x0c6c] has been reserved [ 0.124868] system 00:05: [io 0x0c6f] has been reserved [ 0.124869] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.124870] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.124871] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.124872] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.124873] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.124875] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.124876] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.124877] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.124878] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.124879] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.124880] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.124882] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.124883] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.124887] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125122] system 00:06: [io 0x0e00-0x0e0f] has been reserved [ 0.125123] system 00:06: [io 0x0e80-0x0e8f] has been reserved [ 0.125125] system 00:06: [io 0x0f40-0x0f4f] has been reserved [ 0.125126] system 00:06: [io 0x0a30-0x0a3f] has been reserved [ 0.125129] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125187] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.125190] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125347] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.125349] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.125350] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.125351] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.125353] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.125355] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.125490] pnp: PnP ACPI: found 9 devices [ 0.131538] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.131566] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.131568] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.131570] pci 0000:00:02.0: bridge window [mem 0xfcf00000-0xfdffffff] [ 0.131572] pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.131575] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.131576] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.131578] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.131580] pci 0000:00:07.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.131583] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.131585] pci 0000:00:14.4: bridge window [io 0xe000-0xefff] [ 0.131597] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.131598] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.131599] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.131600] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.131602] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff window] [ 0.131603] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window] [ 0.131604] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.131605] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfdffffff] [ 0.131606] pci_bus 0000:01: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.131608] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.131609] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.131610] pci_bus 0000:02: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.131611] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.131612] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.131613] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.131614] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.131615] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.131616] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff window] [ 0.131617] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window] [ 0.131705] NET: Registered protocol family 2 [ 0.131934] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.131976] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.132147] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.132479] TCP: Hash tables configured (established 65536 bind 65536) [ 0.132554] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.132600] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.132696] NET: Registered protocol family 1 [ 0.132701] NET: Registered protocol family 44 [ 0.853464] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c4 took 703842 usecs [ 0.928462] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x6c4 took 73224 usecs [ 1.003457] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c4 took 73040 usecs [ 1.078458] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6c4 took 73228 usecs [ 1.153453] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c4 took 73029 usecs [ 1.153481] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.153492] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 1.153540] PCI: CLS 64 bytes, default 64 [ 1.153588] Unpacking initramfs... [ 1.678835] Freeing initrd memory: 40900K [ 1.679328] PCI-DMA: Disabling AGP. [ 1.679420] PCI-DMA: aperture base @ c0000000 size 65536 KB [ 1.679420] PCI-DMA: using GART IOMMU. [ 1.679422] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.681515] LVT offset 1 assigned for vector 0x400 [ 1.681526] LVT offset 1 assigned [ 1.681665] perf: AMD IBS detected (0x0000001f) [ 1.681718] Scanning for low memory corruption every 60 seconds [ 1.682310] Initialise system trusted keyrings [ 1.682321] Key type blacklist registered [ 1.682418] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.683695] zbud: loaded [ 1.684250] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.684562] fuse init (API version 7.27) [ 1.684662] pstore: using deflate compression [ 1.687463] Key type asymmetric registered [ 1.687465] Asymmetric key parser 'x509' registered [ 1.687534] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.687639] io scheduler noop registered [ 1.687640] io scheduler deadline registered [ 1.687681] io scheduler cfq registered (default) [ 1.688315] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.688491] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.688605] ACPI: Power Button [PWRB] [ 1.688690] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.688708] ACPI: Power Button [PWRF] [ 1.689469] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.689470] ACPI: Thermal Zone [THRM] (49 C) [ 1.689623] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.710319] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.712165] Linux agpgart interface v0.103 [ 1.714431] loop: module loaded [ 1.714659] libphy: Fixed MDIO Bus: probed [ 1.714660] tun: Universal TUN/TAP device driver, 1.6 [ 1.714742] PPP generic driver version 2.4.2 [ 1.714817] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.714825] ehci-pci: EHCI PCI platform driver [ 1.715049] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.715057] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.715061] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.715070] ehci-pci 0000:00:12.2: debug port 1 [ 1.715235] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeaff800 [ 1.722259] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.722325] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.722326] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.722327] usb usb1: Product: EHCI Host Controller [ 1.722328] usb usb1: Manufacturer: Linux 4.18.0-12-lowlatency ehci_hcd [ 1.722329] usb usb1: SerialNumber: 0000:00:12.2 [ 1.722505] hub 1-0:1.0: USB hub found [ 1.722511] hub 1-0:1.0: 6 ports detected [ 1.722844] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.722849] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.722852] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.722861] ehci-pci 0000:00:13.2: debug port 1 [ 1.723000] ehci-pci 0000:00:13.2: irq 19, io mem 0xfeaff400 [ 1.724359] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.724431] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.724432] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.724433] usb usb2: Product: EHCI Host Controller [ 1.724434] usb usb2: Manufacturer: Linux 4.18.0-12-lowlatency ehci_hcd [ 1.724435] usb usb2: SerialNumber: 0000:00:13.2 [ 1.724552] hub 2-0:1.0: USB hub found [ 1.724562] hub 2-0:1.0: 6 ports detected [ 1.724740] ehci-platform: EHCI generic platform driver [ 1.724760] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.724772] ohci-pci: OHCI PCI platform driver [ 1.724982] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.724992] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.725118] ohci-pci 0000:00:12.0: irq 16, io mem 0xfeafe000 [ 1.781140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 1.781142] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.781143] usb usb3: Product: OHCI PCI host controller [ 1.781144] usb usb3: Manufacturer: Linux 4.18.0-12-lowlatency ohci_hcd [ 1.781145] usb usb3: SerialNumber: 0000:00:12.0 [ 1.781286] hub 3-0:1.0: USB hub found [ 1.781294] hub 3-0:1.0: 3 ports detected [ 1.781592] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.781599] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.781718] ohci-pci 0000:00:12.1: irq 16, io mem 0xfeafd000 [ 1.837149] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 1.837151] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.837152] usb usb4: Product: OHCI PCI host controller [ 1.837153] usb usb4: Manufacturer: Linux 4.18.0-12-lowlatency ohci_hcd [ 1.837153] usb usb4: SerialNumber: 0000:00:12.1 [ 1.837292] hub 4-0:1.0: USB hub found [ 1.837299] hub 4-0:1.0: 3 ports detected [ 1.837592] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.837598] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.837739] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeafc000 [ 1.893117] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 1.893119] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.893120] usb usb5: Product: OHCI PCI host controller [ 1.893121] usb usb5: Manufacturer: Linux 4.18.0-12-lowlatency ohci_hcd [ 1.893122] usb usb5: SerialNumber: 0000:00:13.0 [ 1.893260] hub 5-0:1.0: USB hub found [ 1.893279] hub 5-0:1.0: 3 ports detected [ 1.893573] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.893581] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.893704] ohci-pci 0000:00:13.1: irq 18, io mem 0xfeafb000 [ 1.949114] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 1.949116] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.949117] usb usb6: Product: OHCI PCI host controller [ 1.949118] usb usb6: Manufacturer: Linux 4.18.0-12-lowlatency ohci_hcd [ 1.949119] usb usb6: SerialNumber: 0000:00:13.1 [ 1.949261] hub 6-0:1.0: USB hub found [ 1.949281] hub 6-0:1.0: 3 ports detected [ 1.949573] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.949580] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.949707] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeafa000 [ 2.005109] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 2.005111] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.005112] usb usb7: Product: OHCI PCI host controller [ 2.005113] usb usb7: Manufacturer: Linux 4.18.0-12-lowlatency ohci_hcd [ 2.005113] usb usb7: SerialNumber: 0000:00:14.5 [ 2.005256] hub 7-0:1.0: USB hub found [ 2.005277] hub 7-0:1.0: 2 ports detected [ 2.005401] ohci-platform: OHCI generic platform driver [ 2.005421] uhci_hcd: USB Universal Host Controller Interface driver [ 2.005485] i8042: PNP: No PS/2 controller found. [ 2.005485] i8042: Probing ports directly. [ 2.006144] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.006153] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.006356] mousedev: PS/2 mouse device common for all mice [ 2.006564] rtc_cmos 00:01: RTC can wake from S4 [ 2.006843] rtc_cmos 00:01: registered as rtc0 [ 2.006861] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.006871] i2c /dev entries driver [ 2.006877] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 2.006959] device-mapper: uevent: version 1.0.3 [ 2.007103] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 2.007194] ledtrig-cpu: registered to indicate activity on CPUs [ 2.007717] NET: Registered protocol family 10 [ 2.013264] Segment Routing with IPv6 [ 2.013290] NET: Registered protocol family 17 [ 2.013408] Key type dns_resolver registered [ 2.013850] RAS: Correctable Errors collector initialized. [ 2.013946] microcode: CPU0: patch_level=0x010000c8 [ 2.013963] microcode: CPU1: patch_level=0x010000c8 [ 2.013969] microcode: CPU2: patch_level=0x010000c8 [ 2.013984] microcode: CPU3: patch_level=0x010000c8 [ 2.014059] microcode: Microcode Update Driver: v2.2. [ 2.014070] sched_clock: Marking stable (2014055084, 0)->(2118984016, -104928932) [ 2.014214] registered taskstats version 1 [ 2.014223] Loading compiled-in X.509 certificates [ 2.016064] tsc: Refined TSC clocksource calibration: 3300.188 MHz [ 2.016074] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f91fe34946, max_idle_ns: 440795316226 ns [ 2.016091] clocksource: Switched to clocksource tsc [ 2.017794] Loaded X.509 cert 'Build time autogenerated kernel key: 4e5328f58d8b627e8d84a2f3dadd0112486e6730' [ 2.017831] zswap: loaded using pool lzo/zbud [ 2.023165] Key type big_key registered [ 2.023173] Key type trusted registered [ 2.025549] Key type encrypted registered [ 2.025561] AppArmor: AppArmor sha1 policy hashing enabled [ 2.025574] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.025580] ima: Allocated hash algorithm: sha1 [ 2.025613] evm: Initialising EVM extended attributes: [ 2.025614] evm: security.selinux [ 2.025614] evm: security.SMACK64 [ 2.025615] evm: security.SMACK64EXEC [ 2.025615] evm: security.SMACK64TRANSMUTE [ 2.025615] evm: security.SMACK64MMAP [ 2.025616] evm: security.apparmor [ 2.025616] evm: security.ima [ 2.025617] evm: security.capability [ 2.025617] evm: HMAC attrs: 0x1 [ 2.025943] Magic number: 14:803:28 [ 2.026064] memory memory68: hash matches [ 2.026131] rtc_cmos 00:01: setting system clock to 2018-12-19 13:01:38 UTC (1545224498) [ 2.026329] acpi_cpufreq: overriding BIOS provided _PSD data [ 2.296046] usb 6-1: new full-speed USB device number 2 using ohci-pci [ 2.465483] usb 6-1: New USB device found, idVendor=03f0, idProduct=d407, bcdDevice= 1.33 [ 2.465485] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.465487] usb 6-1: Product: HP Link-5 Micro Receiver [ 2.465487] usb 6-1: Manufacturer: HP [ 2.474232] Freeing unused kernel image memory: 2376K [ 2.474236] Write protecting the kernel read-only data: 22528k [ 2.475900] Freeing unused kernel image memory: 2008K [ 2.476474] Freeing unused kernel image memory: 1792K [ 2.486518] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.562980] ahci 0000:00:11.0: version 3.0 [ 2.563275] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode [ 2.563277] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.564128] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.564227] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.564795] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.564811] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.565239] r8169 0000:02:00.0 eth0: RTL8168d/8111d, 00:30:67:8e:cb:5d, XID 281000c0, IRQ 24 [ 2.565241] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.565664] scsi host0: ahci [ 2.570885] scsi host1: ahci [ 2.571010] scsi host2: pata_atiixp [ 2.571372] scsi host4: pata_atiixp [ 2.571420] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.571421] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.571650] scsi host3: ahci [ 2.571785] scsi host5: ahci [ 2.571823] ata1: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 22 [ 2.571825] ata2: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 22 [ 2.571827] ata3: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffe00 irq 22 [ 2.571829] ata4: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffe80 irq 22 [ 2.572527] hidraw: raw HID events driver (C) Jiri Kosina [ 2.583369] usbcore: registered new interface driver usbhid [ 2.583371] usbhid: USB HID core driver [ 2.593574] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 2.596678] input: HP HP Link-5 Micro Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/0003:03F0:D407.0001/input/input5 [ 2.648244] hid-generic 0003:03F0:D407.0001: input,hidraw0: USB HID v1.11 Keyboard [HP HP Link-5 Micro Receiver] on usb-0000:00:13.1-1/input0 [ 2.648603] input: HP HP Link-5 Micro Receiver Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/0003:03F0:D407.0002/input/input6 [ 2.648765] input: HP HP Link-5 Micro Receiver Consumer Control as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/0003:03F0:D407.0002/input/input7 [ 2.700204] input: HP HP Link-5 Micro Receiver System Control as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/0003:03F0:D407.0002/input/input8 [ 2.700337] hid-generic 0003:03F0:D407.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HP HP Link-5 Micro Receiver] on usb-0000:00:13.1-1/input1 [ 2.885696] ata4: SATA link down (SStatus 0 SControl 300) [ 3.032093] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.032120] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.032139] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.032374] ata2.00: ATAPI: ATAPI DVD A DH16A6L-C, ZHCG, max UDMA/100 [ 3.033041] ata1.00: ATA-8: WDC WD5000AZRX-00A8LB0, 01.01A01, max UDMA/133 [ 3.033043] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.033223] ata3.00: ATA-8: ST3500418AS, CC38, max UDMA/133 [ 3.033226] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32) [ 3.033287] ata2.00: configured for UDMA/100 [ 3.034478] ata1.00: configured for UDMA/133 [ 3.034590] ata3.00: configured for UDMA/133 [ 3.034724] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AZRX-0 1A01 PQ: 0 ANSI: 5 [ 3.035062] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.035087] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.035090] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.035098] sd 0:0:0:0: [sda] Write Protect is off [ 3.035099] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.035112] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.036217] scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16A6L-C ZHCG PQ: 0 ANSI: 5 [ 3.056076] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 3.056167] sda: sda1 [ 3.056173] sda: p1 size 1953122304 extends beyond EOD, enabling native capacity [ 3.056687] sda: sda1 [ 3.056692] sda: p1 size 1953122304 extends beyond EOD, truncated [ 3.057439] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.080525] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.080527] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.080717] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.080810] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.081036] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 [ 3.081362] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.081376] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 3.081377] sd 3:0:0:0: [sdb] Write Protect is off [ 3.081378] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.081394] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.087217] sd 3:0:0:0: [sdb] Attached SCSI disk [ 3.248801] random: kpartx: uninitialized urandom read (2 bytes read) [ 3.578046] usb 1-4: new high-speed USB device number 4 using ehci-pci [ 3.707419] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 3.707421] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.707423] usb 1-4: Product: USB 2.0 Hub [ 3.707746] hub 1-4:1.0: USB hub found [ 3.707919] hub 1-4:1.0: 4 ports detected [ 3.996046] usb 1-4.1: new high-speed USB device number 5 using ehci-pci [ 4.048054] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 4.048116] usb usb3-port1: attempt power cycle [ 4.106720] usb 1-4.1: New USB device found, idVendor=148f, idProduct=5370, bcdDevice= 1.01 [ 4.106722] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.106723] usb 1-4.1: Product: 802.11 n WLAN [ 4.106724] usb 1-4.1: Manufacturer: Ralink [ 4.106725] usb 1-4.1: SerialNumber: 1.0 [ 4.184044] usb 1-4.2: new high-speed USB device number 6 using ehci-pci [ 4.290811] usb 1-4.2: New USB device found, idVendor=2357, idProduct=0105, bcdDevice= 1.00 [ 4.290813] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.290814] usb 1-4.2: Product: WiFi [ 4.290815] usb 1-4.2: Manufacturer: MediaTek [ 4.290816] usb 1-4.2: SerialNumber: 1.0 [ 4.367044] usb 1-4.4: new high-speed USB device number 7 using ehci-pci [ 4.459401] usb 1-4.4: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00 [ 4.459404] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.459405] usb 1-4.4: Product: Flash Card Reader/Writer [ 4.459406] usb 1-4.4: Manufacturer: Generic [ 4.459407] usb 1-4.4: SerialNumber: 058F63666438 [ 4.465772] usb-storage 1-4.4:1.0: USB Mass Storage device detected [ 4.465975] scsi host6: usb-storage 1-4.4:1.0 [ 4.466071] usbcore: registered new interface driver usb-storage [ 4.467467] usbcore: registered new interface driver uas [ 5.344055] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 5.472748] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 5.473079] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 5.476245] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 5.483162] random: fast init done [ 5.483824] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 5.483851] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 5.483862] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 6.328055] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 6.328118] usb usb3-port1: unable to enumerate USB device [ 6.572045] usb 3-3: new low-speed USB device number 6 using ohci-pci [ 6.736844] usb 3-3: New USB device found, idVendor=046d, idProduct=c062, bcdDevice=31.00 [ 6.736846] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.736847] usb 3-3: Product: USB Laser Mouse [ 6.736848] usb 3-3: Manufacturer: Logitech [ 6.746167] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:046D:C062.0003/input/input9 [ 6.746286] hid-generic 0003:046D:C062.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.0-3/input0 [ 6.834117] random: crng init done [ 6.834118] random: 6 urandom warning(s) missed due to ratelimiting [ 17.254713] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 19.139541] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 19.140018] systemd[1]: Detected architecture x86-64. [ 19.157318] systemd[1]: Set hostname to . [ 21.977860] systemd[1]: Listening on Journal Socket (/dev/log). [ 21.978185] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 21.978254] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 21.978368] systemd[1]: Listening on udev Control Socket. [ 21.978416] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 21.978429] systemd[1]: Reached target Remote File Systems. [ 21.978497] systemd[1]: Listening on Syslog Socket. [ 22.159460] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 22.452339] systemd-journald[417]: Received request to flush runtime journal from PID 1 [ 22.713855] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 22.774445] lp: driver loaded but no devices found [ 22.777922] ppdev: user-space parallel port driver [ 22.843205] parport_pc 00:03: reported by Plug and Play ACPI [ 22.843279] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 22.922391] systemd-journald[417]: File /var/log/journal/488691a52d464ed6be2be970b594bebd/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 22.933200] lp0: using parport0 (interrupt-driven). [ 26.675277] kvm: Nested Virtualization enabled [ 26.675280] kvm: Nested Paging enabled [ 27.747785] audit: type=1400 audit(1545224524.219:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=614 comm="apparmor_parser" [ 27.747791] audit: type=1400 audit(1545224524.219:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=614 comm="apparmor_parser" [ 27.747794] audit: type=1400 audit(1545224524.219:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=614 comm="apparmor_parser" [ 27.747885] audit: type=1400 audit(1545224524.219:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine" pid=611 comm="apparmor_parser" [ 27.747891] audit: type=1400 audit(1545224524.219:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4486/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=611 comm="apparmor_parser" [ 27.838095] audit: type=1400 audit(1545224524.310:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=610 comm="apparmor_parser" [ 27.838102] audit: type=1400 audit(1545224524.310:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=610 comm="apparmor_parser" [ 27.838105] audit: type=1400 audit(1545224524.310:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=610 comm="apparmor_parser" [ 27.838108] audit: type=1400 audit(1545224524.310:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=610 comm="apparmor_parser" [ 27.863686] audit: type=1400 audit(1545224524.335:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=615 comm="apparmor_parser" [ 29.914103] gameport gameport0: EMU10K1 is pci0000:03:06.1/gameport0, io 0xe400, speed 657kHz [ 30.249184] snd_emu10k1x 0000:03:06.0: Model 1003 Rev 00000000 Serial 10031102 [ 30.363560] MCE: In-kernel MCE decoding enabled. [ 30.637248] EDAC amd64: Node 0: DRAM ECC disabled. [ 30.637250] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 30.658400] EDAC amd64: Node 0: DRAM ECC disabled. [ 30.658402] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 31.408897] snd_hda_intel 0000:01:00.1: Disabling MSI [ 31.408903] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 32.680614] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 32.684736] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 32.765454] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input10 [ 32.765587] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11 [ 32.765717] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12 [ 32.765818] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13 [ 32.786308] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 32.786311] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 32.786313] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 32.786314] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 [ 32.786315] snd_hda_codec_realtek hdaudioC1D2: dig-out=0x1e/0x0 [ 32.786316] snd_hda_codec_realtek hdaudioC1D2: inputs: [ 32.786317] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19 [ 32.786318] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18 [ 32.786319] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a [ 32.803093] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input14 [ 32.803262] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input15 [ 32.803358] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input16 [ 32.803435] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input17 [ 32.803511] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input18 [ 33.052440] nouveau 0000:01:00.0: NVIDIA GF108 (0c1000a1) [ 33.185261] nouveau 0000:01:00.0: bios: version 70.08.3c.00.00 [ 33.186674] nouveau 0000:01:00.0: fb: 2048 MiB DDR3 [ 33.859657] [TTM] Zone kernel: Available graphics memory: 4049892 kiB [ 33.859659] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 33.859659] [TTM] Initializing pool allocator [ 33.859663] [TTM] Initializing DMA pool allocator [ 33.859682] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 33.859683] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 33.859687] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 33.859688] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 33.859690] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030 [ 33.859691] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000 [ 33.859692] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00020020 [ 33.859694] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 33.859695] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002100 [ 33.859737] nouveau 0000:01:00.0: disp: conn 01:0100: func 08 lookup failed, -2 [ 33.860747] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 33.860748] [drm] Driver supports precise vblank timestamp query. [ 33.861557] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies [ 33.962586] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo 000000001f222fc1 [ 33.962693] fbcon: nouveaufb (fb0) is primary device [ 34.006290] Console: switching to colour frame buffer device 240x67 [ 34.008798] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 34.021078] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 35.219066] usb 1-4.1: reset high-speed USB device number 5 using ehci-pci [ 35.322511] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 35.351132] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected [ 35.376283] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 35.376608] usbcore: registered new interface driver rt2800usb [ 38.778677] rt2800usb 1-4.1:1.0 wlx7cdd90a9ad27: renamed from wlan0 [ 43.664946] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 43.854179] r8169 0000:02:00.0 enp2s0: link down [ 43.854351] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 43.861134] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90a9ad27: link is not ready [ 43.861180] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 43.941303] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 44.257422] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90a9ad27: link is not ready [ 45.843147] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90a9ad27: link is not ready [ 47.188927] wlx7cdd90a9ad27: authenticate with 2c:56:dc:5b:b4:b5 [ 47.218662] wlx7cdd90a9ad27: send auth to 2c:56:dc:5b:b4:b5 (try 1/3) [ 47.223169] wlx7cdd90a9ad27: authenticated [ 47.224191] wlx7cdd90a9ad27: associate with 2c:56:dc:5b:b4:b5 (try 1/3) [ 47.229587] wlx7cdd90a9ad27: RX AssocResp from 2c:56:dc:5b:b4:b5 (capab=0x1431 status=0 aid=1) [ 47.239060] wlx7cdd90a9ad27: associated [ 47.321332] wlx7cdd90a9ad27: Limiting TX power to 30 (30 - 0) dBm as advertised by 2c:56:dc:5b:b4:b5 [ 47.328538] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd90a9ad27: link becomes ready [ 49.835379] bpfilter: Loaded bpfilter_umh pid 1787 [ 51.929904] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 51.930970] virbr0: port 1(virbr0-nic) entered blocking state [ 51.930974] virbr0: port 1(virbr0-nic) entered disabled state [ 51.931058] device virbr0-nic entered promiscuous mode [ 52.721761] virbr0: port 1(virbr0-nic) entered blocking state [ 52.721765] virbr0: port 1(virbr0-nic) entered listening state [ 52.995546] virbr0: port 1(virbr0-nic) entered disabled state [92827.477075] rfkill: input handler disabled [166932.139896] SGI XFS with ACLs, security attributes, realtime, no debug enabled [166932.233721] JFS: nTxBlock = 8192, nTxLock = 65536 [166932.318217] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [166932.406427] QNX4 filesystem 0.2.3 registered. [166932.481388] raid6: sse2x1 gen() 3457 MB/s [166932.493345] raid6: sse2x1 xor() 4355 MB/s [166932.505333] raid6: sse2x2 gen() 6479 MB/s [166932.517337] raid6: sse2x2 xor() 7132 MB/s [166932.529333] raid6: sse2x4 gen() 7948 MB/s [166932.541337] raid6: sse2x4 xor() 4373 MB/s [166932.541339] raid6: using algorithm sse2x4 gen() 7948 MB/s [166932.541339] raid6: .... xor() 4373 MB/s, rmw enabled [166932.541341] raid6: using intx1 recovery algorithm [166932.550706] xor: measuring software checksum speed [166932.560349] prefetch64-sse: 12756.000 MB/sec [166932.570338] generic_sse: 11924.000 MB/sec [166932.570339] xor: using function: prefetch64-sse (12756.000 MB/sec) [166932.665941] Btrfs loaded, crc32c=crc32c-generic [197382.389995] perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [536681.038738] wlx7cdd90a9ad27: deauthenticated from 2c:56:dc:5b:b4:b5 (Reason: 3=DEAUTH_LEAVING) [536696.570865] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90a9ad27: link is not ready [536735.855591] wlx7cdd90a9ad27: authenticate with 2c:56:dc:5b:b4:b5 [536735.877583] wlx7cdd90a9ad27: send auth to 2c:56:dc:5b:b4:b5 (try 1/3) [536735.879927] wlx7cdd90a9ad27: authenticated [536735.881263] wlx7cdd90a9ad27: associate with 2c:56:dc:5b:b4:b5 (try 1/3) [536735.889826] wlx7cdd90a9ad27: RX AssocResp from 2c:56:dc:5b:b4:b5 (capab=0x1431 status=0 aid=1) [536735.899602] wlx7cdd90a9ad27: associated [536735.910453] wlx7cdd90a9ad27: Limiting TX power to 30 (30 - 0) dBm as advertised by 2c:56:dc:5b:b4:b5 [536738.983010] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd90a9ad27: link becomes ready [616957.834083] UDF-fs: INFO Mounting volume 'SEP13011042072', timestamp 2001/09/13 03:42 (1000) [728246.982466] VFS: busy inodes on changed media or resized disk sr0 [745590.722221] kauditd_printk_skb: 51 callbacks suppressed [745590.722227] audit: type=1400 audit(1545970098.546:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.vlc.vlc" pid=2965 comm="apparmor_parser" [745590.730625] audit: type=1400 audit(1545970098.555:64): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.vlc" pid=2967 comm="apparmor_parser" [745590.941759] audit: type=1400 audit(1545970098.766:65): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6130/usr/lib/snapd/snap-confine" pid=2974 comm="apparmor_parser" [745590.941774] audit: type=1400 audit(1545970098.766:66): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6130/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2974 comm="apparmor_parser" [745590.956510] audit: type=1400 audit(1545970098.781:67): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=2976 comm="apparmor_parser" [745590.958534] audit: type=1400 audit(1545970098.783:68): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=2977 comm="apparmor_parser" [778788.399212] audit: type=1400 audit(1546003296.770:69): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="virt-aa-helper" pid=12964 comm="apparmor_parser" [778788.520750] audit: type=1400 audit(1546003296.892:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/libvirtd" pid=12968 comm="apparmor_parser" [778788.531028] audit: type=1400 audit(1546003296.902:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/libvirtd//qemu_bridge_helper" pid=12968 comm="apparmor_parser"