[    8.844267] vboxdrv: Found 4 processor cores.
[    8.847805] vboxdrv: fAsync=0 offMin=0x1dc offMax=0x7e9c
[    8.847897] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    8.847900] vboxdrv: Successfully loaded version 4.3.6 (interface 0x001a0007).
[    8.858934] AVX or AES-NI instructions are not detected.
[    9.061104] vboxpci: IOMMU not found (not registered)
[    9.230010] init: anacron main process (2077) killed by TERM signal
[    9.422889] init: plymouth-stop pre-start process (2727) terminated with status 1
[   10.863342] wlan0: authenticate with 24:65:11:bc:65:a2
[   10.870373] wlan0: send auth to 24:65:11:bc:65:a2 (try 1/3)
[   10.872954] wlan0: authenticated
[   10.876267] wlan0: associate with 24:65:11:bc:65:a2 (try 1/3)
[   10.883965] wlan0: RX AssocResp from 24:65:11:bc:65:a2 (capab=0x431 status=0 aid=2)
[   10.892612] wlan0: associated
[   10.892720] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  521.219282] wlan0: deauthenticating from 24:65:11:bc:65:a2 by local choice (reason=3)
[  521.239768] cfg80211: Calling CRDA for country: DE
[  522.033970] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[  522.041395] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[  522.101775] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  522.210660] r8169 0000:03:00.0 eth0: link down
[  522.210736] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  522.352571] init: anacron main process (3785) killed by TERM signal
[  522.439448] PM: Syncing filesystems ... done.
[  522.455666] PM: Preparing system for mem sleep
[  522.456139] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  522.458037] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  522.459196] PM: Entering mem sleep
[  522.459528] Suspending console(s) (use no_console_suspend to debug)
[  523.882812] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[  523.882918] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  523.882985] sd 0:0:0:0: [sda] Stopping disk
[  523.883792] sd 1:0:0:0: [sdb] Stopping disk
[  523.921197] mei_me 0000:00:16.0: suspend
[  525.206150] PM: suspend of devices complete after 2748.720 msecs
[  525.206324] PM: late suspend of devices complete after 0.171 msecs
[  525.206535] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
[  525.238088] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[  525.254170] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[  525.285970] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  525.301962] PM: noirq suspend of devices complete after 95.712 msecs
[  525.302257] ACPI: Preparing to enter system sleep state S3
[  525.330371] PM: Saving platform NVS memory
[  525.335925] Disabling non-boot CPUs ...
[  525.437854] smpboot: CPU 1 is now offline
[  525.541742] smpboot: CPU 2 is now offline
[  525.645661] smpboot: CPU 3 is now offline
[  525.647522] ACPI: Low-level resume complete
[  525.647575] PM: Restoring platform NVS memory
[  525.649384] Enabling non-boot CPUs ...
[  525.649433] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  525.662973] CPU1 is up
[  525.663000] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  525.676456] CPU2 is up
[  525.676477] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  525.689886] CPU3 is up
[  525.695759] ACPI: Waking up from system sleep state S3
[  526.144617] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  526.176578] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[  526.208569] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[  526.256644] PM: noirq resume of devices complete after 143.992 msecs
[  526.256792] PM: early resume of devices complete after 0.123 msecs
[  526.256819] i915 0000:00:02.0: setting latency timer to 64
[  526.256831] xhci_hcd 0000:00:14.0: setting latency timer to 64
[  526.256920] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[  526.257140] ahci 0000:00:1f.2: setting latency timer to 64
[  526.257191] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
[  526.257522] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[  526.257580] ehci-pci 0000:00:1d.0: setting latency timer to 64
[  526.257720] ehci-pci 0000:00:1a.0: setting latency timer to 64
[  526.268255] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[  526.370070] r8169 0000:03:00.0 eth0: link down
[  526.468525] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
[  526.563235] btusb 1-1.4:1.0: no reset_resume for driver btusb?
[  526.563236] btusb 1-1.4:1.1: no reset_resume for driver btusb?
[  526.600226] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  526.600250] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  526.600994] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20130517/dsopcode-236)
[  526.601000] ACPI Error: Method parse/execution failed [\GTFB] (Node ffff8801192bdaa0), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[  526.601005] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8801192bdc58), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[  526.601008] ata2.00: _GTF evaluation failed (AE 0x300a)
[  526.601858] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20130517/dsopcode-236)
[  526.601863] ACPI Error: Method parse/execution failed [\GTFB] (Node ffff8801192bdaa0), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[  526.601868] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8801192bdc58), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[  526.601871] ata2.00: _GTF evaluation failed (AE 0x300a)
[  526.602113] ata2.00: configured for UDMA/133
[  526.610128] ata3.00: configured for UDMA/100
[  526.616236] sd 1:0:0:0: [sdb] Starting disk
[  527.407610] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[  528.966346] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  528.973022] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20130517/dsopcode-236)
[  528.973028] ACPI Error: Method parse/execution failed [\GTFB] (Node ffff8801192bdaa0), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[  528.973034] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8801192bdbe0), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[  528.973038] ata1.00: _GTF evaluation failed (AE 0x300a)
[  528.973345] ata1.00: failed to enable AA (error_mask=0x1)
[  528.980039] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20130517/dsopcode-236)
[  528.980045] ACPI Error: Method parse/execution failed [\GTFB] (Node ffff8801192bdaa0), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[  528.980051] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8801192bdbe0), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[  528.980056] ata1.00: _GTF evaluation failed (AE 0x300a)
[  528.980352] ata1.00: failed to enable AA (error_mask=0x1)
[  528.980359] ata1.00: configured for UDMA/100
[  529.002360] sd 0:0:0:0: [sda] Starting disk
[  529.026315] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[  529.033702] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[  529.101458] PM: resume of devices complete after 2846.985 msecs
[  529.102217] PM: Finishing wakeup.
[  529.102219] Restarting tasks ... done.
[  529.111599] video LNXVIDEO:01: Restoring backlight state
[  529.653889] ehci-pci 0000:00:1d.0: setting latency timer to 64
[  529.733769] xhci_hcd 0000:00:14.0: setting latency timer to 64
[  531.276478] wlan0: authenticate with 00:0b:0e:55:5b:42
[  531.281147] wlan0: send auth to 00:0b:0e:55:5b:42 (try 1/3)
[  531.282769] wlan0: authenticated
[  531.284385] wlan0: associate with 00:0b:0e:55:5b:42 (try 1/3)
[  531.288241] wlan0: RX AssocResp from 00:0b:0e:55:5b:42 (capab=0x431 status=0 aid=3)
[  531.295441] wlan0: associated
[  531.295540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready