[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-26-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #47-Ubuntu SMP Wed Nov 17 15:58:05 UTC 2010 (Ubuntu 2.6.32-26.47-generic 2.6.32.24+drm33.11) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=29aa567c-ece6-4dc0-8c6d-b2e194c160da ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf00000 (usable) [ 0.000000] BIOS-e820: 000000007bf00000 - 000000007bf17000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bf17000 - 000000007bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bf80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7bf00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-protect [ 0.000000] E0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007bf00000 (usable) [ 0.000000] modified: 000000007bf00000 - 000000007bf17000 (ACPI data) [ 0.000000] modified: 000000007bf17000 - 000000007bf80000 (ACPI NVS) [ 0.000000] modified: 000000007bf80000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007bf00000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007be00000 page 2M [ 0.000000] 007be00000 - 007bf00000 page 4k [ 0.000000] kernel direct mapping tables up to 7bf00000 @ 8000-c000 [ 0.000000] RAMDISK: 377fb000 - 37fef261 [ 0.000000] ACPI: RSDP 00000000000f87b0 00024 (v03 HPQOEM) [ 0.000000] ACPI: XSDT 000000007bf0fff0 0005C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 000000007bf16a64 000F4 (v03 HPQOEM SLIC-MPC 06040000 PTL 000F4240) [ 0.000000] ACPI: DSDT 000000007bf1004c 06A18 (v01 HPQOEM SLIC-MPC 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007bf17fc0 00040 [ 0.000000] ACPI: SLIC 000000007bf16bcc 00176 (v01 HPQOEM SLIC-MPC 06040000 HPQ 00000001) [ 0.000000] ACPI: MCFG 000000007bf16d42 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 000000007bf16d7e 00038 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 000000007bf16db6 0005E (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 000000007bf16e14 00028 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 000000007bf16e3c 001C4 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007bf00000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007bf00000 [ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff] [ 0.000000] bootmap [000000000000f000 - 000000000001e7df] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007bf00000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fa64] TEXT DATA BSS ==> [0001000000 - 0001a2fa64] [ 0.000000] #3 [00377fb000 - 0037fef261] RAMDISK ==> [00377fb000 - 0037fef261] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a3014c] BRK ==> [0001a30000 - 0001a3014c] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000f8780] f8780 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007bf00 [ 0.000000] On node 0 totalpages: 507544 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3833 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6885 pages used for memmap [ 0.000000] DMA32 zone: 496667 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 500500 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=29aa567c-ece6-4dc0-8c6d-b2e194c160da ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 28a8000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1982504k/2030592k available (5421k kernel code, 416k absent, 47672k reserved, 2980k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1808.228 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3616.45 BogoMIPS (lpj=18082280) [ 0.010037] Security Framework initialized [ 0.010058] AppArmor: AppArmor initialized [ 0.010304] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012150] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.013009] Mount-cache hash table entries: 256 [ 0.013170] Initializing cgroup subsys ns [ 0.013175] Initializing cgroup subsys cpuacct [ 0.013179] Initializing cgroup subsys memory [ 0.013189] Initializing cgroup subsys devices [ 0.013192] Initializing cgroup subsys freezer [ 0.013194] Initializing cgroup subsys net_cls [ 0.013215] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.013218] CPU: L2 Cache: 512K (64 bytes/line) [ 0.013221] CPU 0/0x0 -> Node 0 [ 0.013223] tseg: 007bf80000 [ 0.013225] CPU: Physical Processor ID: 0 [ 0.013227] CPU: Processor Core ID: 0 [ 0.013230] mce: CPU supports 5 MCE banks [ 0.013242] using C1E aware idle routine [ 0.013244] Performance Events: AMD PMU driver. [ 0.013250] ... version: 0 [ 0.013252] ... bit width: 48 [ 0.013253] ... generic registers: 4 [ 0.013255] ... value mask: 0000ffffffffffff [ 0.013258] ... max period: 00007fffffffffff [ 0.013260] ... fixed-purpose events: 0 [ 0.013261] ... event mask: 000000000000000f [ 0.015130] ACPI: Core revision 20090903 [ 0.030010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030016] ftrace: allocating 22543 entries in 89 pages [ 0.040114] Setting APIC routing to flat [ 0.040646] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.146950] CPU0: AMD Turion(tm) 64 X2 stepping 02 [ 0.150000] APIC calibration not consistent with PM-Timer: 209ms instead of 100ms [ 0.150000] APIC delta adjusted to PM-Timer: 1255712 (2636994) [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] System has AMD C1E enabled [ 0.020000] Switch to broadcast mode on CPU1 [ 0.300073] CPU1: AMD Turion(tm) 64 X2 stepping 02 [ 0.300094] Brought up 2 CPUs [ 0.300097] Total of 2 processors activated (7232.95 BogoMIPS). [ 0.300329] CPU0 attaching sched-domain: [ 0.300332] domain 0: span 0-1 level MC [ 0.300335] groups: 0 1 [ 0.300341] CPU1 attaching sched-domain: [ 0.300343] domain 0: span 0-1 level MC [ 0.300346] groups: 1 0 [ 0.300429] Switch to broadcast mode on CPU0 [ 0.300429] devtmpfs: initialized [ 0.300429] regulator: core version 0.5 [ 0.300429] Time: 19:52:42 Date: 11/29/10 [ 0.300429] NET: Registered protocol family 16 [ 0.300429] node 0 link 0: io port [2000, fffff] [ 0.300429] TOM: 0000000080000000 aka 2048M [ 0.300429] node 0 link 0: mmio [e0000000, efffffff] [ 0.300429] node 0 link 0: mmio [a0000, bffff] [ 0.300429] node 0 link 0: mmio [80000000, fe0bffff] [ 0.300429] bus: [00,ff] on node 0 link 0 [ 0.300429] bus: 00 index 0 io port: [0, ffff] [ 0.300429] bus: 00 index 1 mmio: [80000000, fcffffffff] [ 0.300429] bus: 00 index 2 mmio: [a0000, bffff] [ 0.300429] ACPI: bus type pci registered [ 0.300429] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4 [ 0.300429] PCI: MCFG area at e0000000 reserved in E820 [ 0.300532] PCI: Using MMCONFIG at e0000000 - e04fffff [ 0.300534] PCI: Using configuration type 1 for base access [ 0.301428] Trying to unpack rootfs image as initramfs... [ 0.310095] bio: create slab at 0 [ 0.310848] ACPI: EC: Look up EC in DSDT [ 0.315760] ACPI: BIOS _OSI(Linux) query ignored [ 0.320057] ACPI: Interpreter enabled [ 0.320060] ACPI: (supports S0 S3 S4 S5) [ 0.320083] ACPI: Using IOAPIC for interrupt routing [ 0.320516] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.333766] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62 [ 0.340046] ACPI: No dock devices found. [ 0.340485] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.340777] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.340780] pci 0000:00:02.0: PME# disabled [ 0.340820] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.340823] pci 0000:00:03.0: PME# disabled [ 0.340845] pci 0000:00:05.0: reg 10 32bit mmio: [0xb2000000-0xb2ffffff] [ 0.340851] pci 0000:00:05.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.340857] pci 0000:00:05.0: reg 1c 64bit mmio: [0xb1000000-0xb1ffffff] [ 0.340863] pci 0000:00:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.341108] pci 0000:00:0a.1: reg 20 io port: [0x3040-0x307f] [ 0.341114] pci 0000:00:0a.1: reg 24 io port: [0x3000-0x303f] [ 0.341139] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.341144] pci 0000:00:0a.1: PME# disabled [ 0.341180] pci 0000:00:0a.3: reg 10 32bit mmio: [0xb0040000-0xb007ffff] [ 0.341276] pci 0000:00:0b.0: reg 10 32bit mmio: [0xb0004000-0xb0004fff] [ 0.341311] pci 0000:00:0b.0: supports D1 D2 [ 0.341313] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.341318] pci 0000:00:0b.0: PME# disabled [ 0.341352] pci 0000:00:0b.1: reg 10 32bit mmio: [0xb0005000-0xb00050ff] [ 0.341387] pci 0000:00:0b.1: supports D1 D2 [ 0.341389] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.341393] pci 0000:00:0b.1: PME# disabled [ 0.341434] pci 0000:00:0d.0: reg 20 io port: [0x3080-0x308f] [ 0.341480] pci 0000:00:0e.0: reg 10 io port: [0x30b0-0x30b7] [ 0.341485] pci 0000:00:0e.0: reg 14 io port: [0x30a4-0x30a7] [ 0.341490] pci 0000:00:0e.0: reg 18 io port: [0x30a8-0x30af] [ 0.341495] pci 0000:00:0e.0: reg 1c io port: [0x30a0-0x30a3] [ 0.341501] pci 0000:00:0e.0: reg 20 io port: [0x3090-0x309f] [ 0.341506] pci 0000:00:0e.0: reg 24 32bit mmio: [0xb0006000-0xb0006fff] [ 0.341600] pci 0000:00:10.1: reg 10 32bit mmio: [0xb0000000-0xb0003fff] [ 0.341635] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.341639] pci 0000:00:10.1: PME# disabled [ 0.341675] pci 0000:00:14.0: reg 10 32bit mmio: [0xb0007000-0xb0007fff] [ 0.341681] pci 0000:00:14.0: reg 14 io port: [0x30b8-0x30bf] [ 0.341705] pci 0000:00:14.0: supports D1 D2 [ 0.341707] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.341711] pci 0000:00:14.0: PME# disabled [ 0.341853] pci 0000:01:00.0: reg 10 64bit mmio: [0xb3000000-0xb3003fff] [ 0.341863] pci 0000:01:00.0: reg 18 64bit mmio pref: [0xd0000000-0xd00fffff] [ 0.341901] pci 0000:01:00.0: supports D1 D2 [ 0.341953] pci 0000:00:02.0: bridge 32bit mmio: [0xb3000000-0xb30fffff] [ 0.341957] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xd00fffff] [ 0.341998] pci 0000:00:03.0: bridge io port: [0x4000-0x4fff] [ 0.342001] pci 0000:00:03.0: bridge 32bit mmio: [0xb4000000-0xb7ffffff] [ 0.342005] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0200000-0xd03fffff] [ 0.342044] pci 0000:05:09.0: reg 10 32bit mmio: [0xb8000000-0xb80007ff] [ 0.342080] pci 0000:05:09.0: supports D1 D2 [ 0.342083] pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.342087] pci 0000:05:09.0: PME# disabled [ 0.342115] pci 0000:05:09.1: reg 10 32bit mmio: [0xb8000800-0xb80008ff] [ 0.342151] pci 0000:05:09.1: supports D1 D2 [ 0.342154] pci 0000:05:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.342158] pci 0000:05:09.1: PME# disabled [ 0.342186] pci 0000:05:09.2: reg 10 32bit mmio: [0xb8000c00-0xb8000cff] [ 0.342222] pci 0000:05:09.2: supports D1 D2 [ 0.342225] pci 0000:05:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.342229] pci 0000:05:09.2: PME# disabled [ 0.342258] pci 0000:05:09.3: reg 10 32bit mmio: [0xb8001000-0xb80010ff] [ 0.342294] pci 0000:05:09.3: supports D1 D2 [ 0.342296] pci 0000:05:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.342300] pci 0000:05:09.3: PME# disabled [ 0.342329] pci 0000:05:09.4: reg 10 32bit mmio: [0xb8001400-0xb80014ff] [ 0.342365] pci 0000:05:09.4: supports D1 D2 [ 0.342367] pci 0000:05:09.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.342371] pci 0000:05:09.4: PME# disabled [ 0.342403] pci 0000:00:10.0: transparent bridge [ 0.342407] pci 0000:00:10.0: bridge 32bit mmio: [0xb8000000-0xb80fffff] [ 0.342420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.342546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.342598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.342636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.431755] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 22 23) *0, disabled. [ 0.431971] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 22 23) *10 [ 0.432186] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 *10 11 14 15) [ 0.432403] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.432622] ACPI: PCI Interrupt Link [LK1E] (IRQs 20) *0, disabled. [ 0.432833] ACPI: PCI Interrupt Link [LK2E] (IRQs 19) *11 [ 0.433044] ACPI: PCI Interrupt Link [LK3E] (IRQs 21) *10 [ 0.433258] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 22 23) *0, disabled. [ 0.433477] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 22 23) *10 [ 0.433690] ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 22 23) *11 [ 0.433904] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 22 23) *11 [ 0.434122] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 22 23) *7 [ 0.434347] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 22 23) *11 [ 0.434564] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 22 23) *0, disabled. [ 0.434787] ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 22 23) *0, disabled. [ 0.435002] ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 22 23) *0, disabled. [ 0.440079] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 22 23) *0, disabled. [ 0.440309] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 22 23) *5 [ 0.440526] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 22 23) *0 [ 0.440670] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.440687] vgaarb: loaded [ 0.440818] SCSI subsystem initialized [ 0.440933] libata version 3.00 loaded. [ 0.441034] usbcore: registered new interface driver usbfs [ 0.441048] usbcore: registered new interface driver hub [ 0.441084] usbcore: registered new device driver usb [ 0.441293] ACPI: WMI: Mapper loaded [ 0.441295] PCI: Using ACPI for IRQ routing [ 0.441509] NetLabel: Initializing [ 0.441511] NetLabel: domain hash size = 128 [ 0.441513] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.441531] NetLabel: unlabeled traffic allowed by default [ 0.441584] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.441590] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.460046] Switching to clocksource hpet [ 0.462054] AppArmor: AppArmor Filesystem Enabled [ 0.462077] pnp: PnP ACPI init [ 0.462098] ACPI: bus type pnp registered [ 0.465636] pnp: PnP ACPI: found 11 devices [ 0.465639] ACPI: ACPI bus type pnp unregistered [ 0.465654] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.465662] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.465666] system 00:02: ioport range 0x1080-0x10ff has been reserved [ 0.465669] system 00:02: ioport range 0x1400-0x147f has been reserved [ 0.465673] system 00:02: ioport range 0x1480-0x14ff has been reserved [ 0.465676] system 00:02: ioport range 0x1800-0x187f has been reserved [ 0.465680] system 00:02: ioport range 0x1880-0x18ff has been reserved [ 0.465683] system 00:02: ioport range 0x2000-0x203f has been reserved [ 0.465690] system 00:03: ioport range 0x360-0x361 has been reserved [ 0.465698] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.470489] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.470492] pci 0000:00:02.0: IO window: disabled [ 0.470495] pci 0000:00:02.0: MEM window: 0xb3000000-0xb30fffff [ 0.470499] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d00fffff [ 0.470504] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 [ 0.470507] pci 0000:00:03.0: IO window: 0x4000-0x4fff [ 0.470510] pci 0000:00:03.0: MEM window: 0xb4000000-0xb7ffffff [ 0.470514] pci 0000:00:03.0: PREFETCH window: 0x000000d0200000-0x000000d03fffff [ 0.470519] pci 0000:00:10.0: PCI bridge, secondary bus 0000:05 [ 0.470521] pci 0000:00:10.0: IO window: disabled [ 0.470525] pci 0000:00:10.0: MEM window: 0xb8000000-0xb80fffff [ 0.470529] pci 0000:00:10.0: PREFETCH window: disabled [ 0.470540] pci 0000:00:02.0: setting latency timer to 64 [ 0.470546] pci 0000:00:03.0: setting latency timer to 64 [ 0.470551] pci 0000:00:10.0: setting latency timer to 64 [ 0.470556] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.470559] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.470562] pci_bus 0000:01: resource 1 mem: [0xb3000000-0xb30fffff] [ 0.470565] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd00fffff] [ 0.470569] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff] [ 0.470572] pci_bus 0000:03: resource 1 mem: [0xb4000000-0xb7ffffff] [ 0.470575] pci_bus 0000:03: resource 2 pref mem [0xd0200000-0xd03fffff] [ 0.470578] pci_bus 0000:05: resource 1 mem: [0xb8000000-0xb80fffff] [ 0.470581] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.470584] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.470629] NET: Registered protocol family 2 [ 0.470787] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.471921] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.475343] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.476132] TCP: Hash tables configured (established 262144 bind 65536) [ 0.476136] TCP reno registered [ 0.476264] NET: Registered protocol family 1 [ 0.476298] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.476304] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.476345] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.476370] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.476377] pci 0000:00:05.0: Boot video device [ 0.678848] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.678903] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.678960] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.680394] Simple Boot Flag at 0x36 set to 0x1 [ 0.680608] Scanning for low memory corruption every 60 seconds [ 0.680764] audit: initializing netlink socket (disabled) [ 0.680777] type=2000 audit(1291060361.678:1): initialized [ 0.691330] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.693027] VFS: Disk quotas dquot_6.5.2 [ 0.693093] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.693826] fuse init (API version 7.13) [ 0.693925] msgmni has been set to 3872 [ 0.694190] alg: No test for stdrng (krng) [ 0.694256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.694260] io scheduler noop registered [ 0.694262] io scheduler anticipatory registered [ 0.694264] io scheduler deadline registered [ 0.694316] io scheduler cfq registered (default) [ 0.694518] alloc irq_desc for 24 on node 0 [ 0.694521] alloc kstat_irqs on node 0 [ 0.694530] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.694537] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.694646] alloc irq_desc for 25 on node 0 [ 0.694649] alloc kstat_irqs on node 0 [ 0.694654] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X [ 0.694659] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.694732] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.694759] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.695583] ACPI: AC Adapter [ADP1] (on-line) [ 0.695668] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.696606] ACPI: Lid Switch [LID0] [ 0.696654] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.696661] ACPI: Sleep Button [SLPB] [ 0.696708] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.696711] ACPI: Power Button [PWRB] [ 0.696776] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.696779] ACPI: Power Button [PWRF] [ 0.697105] ACPI: processor limited to max C-state 1 [ 0.697134] processor LNXCPU:00: registered as cooling_device0 [ 0.697342] processor LNXCPU:01: registered as cooling_device1 [ 0.759284] Freeing initrd memory: 8144k freed [ 1.204381] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.204393] ACPI: Thermal Zone [TZS0] (40 C) [ 1.209225] thermal LNXTHERM:02: registered as thermal_zone1 [ 1.209233] ACPI: Thermal Zone [TZS1] (43 C) [ 1.211613] Linux agpgart interface v0.103 [ 1.211666] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.213720] brd: module loaded [ 1.214454] loop: module loaded [ 1.214887] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.215406] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 1.215490] pata_acpi 0000:00:0e.0: enabling device (0005 -> 0007) [ 1.215884] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 1.215889] alloc irq_desc for 23 on node 0 [ 1.215891] alloc kstat_irqs on node 0 [ 1.215903] pata_acpi 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 [ 1.215927] pata_acpi 0000:00:0e.0: setting latency timer to 64 [ 1.215936] pata_acpi 0000:00:0e.0: PCI INT A disabled [ 1.216519] Fixed MDIO Bus: probed [ 1.216558] PPP generic driver version 2.4.2 [ 1.216598] tun: Universal TUN/TAP device driver, 1.6 [ 1.216600] tun: (C) 1999-2004 Max Krasnyansky [ 1.216693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.217135] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 1.217138] alloc irq_desc for 22 on node 0 [ 1.217140] alloc kstat_irqs on node 0 [ 1.217149] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22 [ 1.217166] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 1.217169] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 1.217253] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 1.217294] ehci_hcd 0000:00:0b.1: debug port 1 [ 1.217309] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 1.217345] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000 [ 1.230037] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 1.230151] usb usb1: configuration #1 chosen from 1 choice [ 1.230188] hub 1-0:1.0: USB hub found [ 1.230197] hub 1-0:1.0: 8 ports detected [ 1.230305] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.230774] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 1.230777] alloc irq_desc for 18 on node 0 [ 1.230779] alloc kstat_irqs on node 0 [ 1.230789] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, high) -> IRQ 18 [ 1.230804] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 1.230808] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 1.230870] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 1.230903] ohci_hcd 0000:00:0b.0: irq 18, io mem 0xb0004000 [ 1.280216] ACPI: Battery Slot [BAT0] (battery present) [ 1.292142] usb usb2: configuration #1 chosen from 1 choice [ 1.292181] hub 2-0:1.0: USB hub found [ 1.292192] hub 2-0:1.0: 8 ports detected [ 1.292284] uhci_hcd: USB Universal Host Controller Interface driver [ 1.292371] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.292699] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.292792] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.292799] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.292803] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.292806] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.292810] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.292931] mice: PS/2 mouse device common for all mice [ 1.293124] rtc_cmos 00:06: RTC can wake from S4 [ 1.293174] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.293213] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.293353] device-mapper: uevent: version 1.0.3 [ 1.293536] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.293717] device-mapper: multipath: version 1.1.0 loaded [ 1.293720] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.294033] cpuidle: using governor ladder [ 1.294036] cpuidle: using governor menu [ 1.294466] TCP cubic registered [ 1.294635] NET: Registered protocol family 10 [ 1.295188] lo: Disabled Privacy Extensions [ 1.295531] NET: Registered protocol family 17 [ 1.295576] powernow-k8: Found 1 AMD Turion(tm) 64 X2 processors (2 cpu cores) (version 2.20.00) [ 1.295668] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.295688] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13 [ 1.295691] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x15 [ 1.295694] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e [ 1.295882] PM: Resume from disk failed. [ 1.295899] registered taskstats version 1 [ 1.296319] Magic number: 2:566:901 [ 1.296421] rtc_cmos 00:06: setting system clock to 2010-11-29 19:52:43 UTC (1291060363) [ 1.296425] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.296427] EDD information not available. [ 1.296511] Freeing unused kernel memory: 876k freed [ 1.297005] Write protecting the kernel read-only data: 7696k [ 1.320345] udev: starting version 151 [ 1.445067] pata_amd 0000:00:0d.0: version 0.4.1 [ 1.445128] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 1.472005] scsi0 : pata_amd [ 1.484274] scsi1 : pata_amd [ 1.485158] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 1.485162] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 1.488973] sata_nv 0000:00:0e.0: version 3.5 [ 1.488996] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 [ 1.489000] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.489069] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.489541] scsi2 : sata_nv [ 1.489672] scsi3 : sata_nv [ 1.489891] ata3: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 23 [ 1.489895] ata4: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 23 [ 1.490225] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.490617] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17 [ 1.490623] alloc irq_desc for 17 on node 0 [ 1.490626] alloc kstat_irqs on node 0 [ 1.490639] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 17 (level, high) -> IRQ 17 [ 1.490645] forcedeth 0000:00:14.0: setting latency timer to 64 [ 1.490704] nv_probe: set workaround bit for reversed mac addr [ 1.670039] usb 1-8: new high speed USB device using ehci_hcd and address 3 [ 1.829620] usb 1-8: configuration #1 chosen from 1 choice [ 1.830344] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2 [ 1.830381] ata2: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0x0) ACPI=0x7001 (60:600:0x11) [ 1.880318] ata2.00: configured for MWDMA2 [ 1.891289] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5 [ 1.902190] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.902193] Uniform CD-ROM driver Revision: 3.20 [ 1.902321] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.902399] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 1.980058] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.000247] ata3.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7BP, max UDMA/100 [ 2.000251] ata3.00: 312581808 sectors, multi 16: LBA48 [ 2.020933] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:d3:92:46:75 [ 2.020937] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 2.040297] ata3.00: configured for UDMA/100 [ 2.040444] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 2.040618] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.040696] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.040804] sd 2:0:0:0: [sda] Write Protect is off [ 2.040808] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.040861] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.041132] sda: [ 2.170036] usb 2-4: new full speed USB device using ohci_hcd and address 2 [ 2.372534] ata4: SATA link down (SStatus 0 SControl 300) [ 2.417151] usb 2-4: configuration #1 chosen from 1 choice [ 2.456013] sda1 sda2 sda3 sda4 [ 2.472500] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.477369] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 16 [ 2.477378] alloc irq_desc for 16 on node 0 [ 2.477381] alloc kstat_irqs on node 0 [ 2.477396] ohci1394 0000:05:09.0: PCI INT A -> Link[LNK1] -> GSI 16 (level, high) -> IRQ 16 [ 2.532093] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[b8000000-b80007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.040464] kjournald starting. Commit interval 5 seconds [ 3.040497] EXT3-fs: mounted filesystem with ordered data mode. [ 3.852810] ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a0045085031] [ 34.902642] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). [ 34.902647] atkbd.c: Use 'setkeycodes e059 ' to make it known. [ 34.903303] atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). [ 34.903307] atkbd.c: Use 'setkeycodes e059 ' to make it known. [ 37.015585] Adding 4883752k swap on /dev/sda2. Priority:-1 extents:1 across:4883752k [ 37.030534] udev: starting version 151 [ 37.062703] ACPI: EC: GPE storm detected, transactions will use polling mode [ 37.342282] type=1505 audit(1291081999.536:2): operation="profile_load" pid=591 name="/sbin/dhclient3" [ 37.342675] type=1505 audit(1291081999.546:3): operation="profile_load" pid=591 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 37.342852] type=1505 audit(1291081999.546:4): operation="profile_load" pid=591 name="/usr/lib/connman/scripts/dhclient-script" [ 37.534678] EXT3 FS on sda4, internal journal [ 37.569911] EDAC MC: Ver: 2.1.0 Nov 17 2010 [ 37.573453] EDAC amd64_edac: Ver: 3.2.0 Nov 17 2010 [ 37.573572] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 37.573581] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 37.573583] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 37.573584] (Note that use of the override may cause unknown side effects.) [ 37.573609] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 37.617911] sdhci: Secure Digital Host Controller Interface driver [ 37.617915] sdhci: Copyright(c) Pierre Ossman [ 37.620335] sdhci-pci 0000:05:09.1: SDHCI controller found [1180:0822] (rev 19) [ 37.621036] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 23 [ 37.621042] sdhci-pci 0000:05:09.1: PCI INT B -> Link[LNK2] -> GSI 23 (level, high) -> IRQ 23 [ 37.623138] Registered led device: mmc0:: [ 37.624184] mmc0: SDHCI controller on PCI [0000:05:09.1] using PIO [ 37.660691] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 37.792014] Bluetooth: Core ver 2.15 [ 37.792122] NET: Registered protocol family 31 [ 37.792124] Bluetooth: HCI device and connection manager initialized [ 37.792128] Bluetooth: HCI socket layer initialized [ 37.792330] ricoh-mmc: Ricoh MMC Controller disabling driver [ 37.792333] ricoh-mmc: Copyright(c) Philip Langdale [ 37.795388] ricoh-mmc: Ricoh MMC controller found at 0000:05:09.2 [1180:0843] (rev 1) [ 37.795412] ricoh-mmc: Controller is now disabled. [ 37.797165] lib80211: common routines for IEEE802.11 drivers [ 37.797170] lib80211_crypt: registered algorithm 'NULL' [ 37.797699] i2c i2c-0: nForce2 SMBus adapter at 0x3040 [ 37.797754] i2c i2c-1: nForce2 SMBus adapter at 0x3000 [ 37.835901] vga16fb: initializing [ 37.835906] vga16fb: mapped to 0xffff8800000a0000 [ 37.836794] fb0: VGA16 VGA frame buffer device [ 38.316868] wl: module license 'MIXED/Proprietary' taints kernel. [ 38.316874] Disabling lock debugging due to kernel taint [ 38.323312] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19 [ 38.323320] alloc irq_desc for 19 on node 0 [ 38.323323] alloc kstat_irqs on node 0 [ 38.323336] wl 0000:01:00.0: PCI INT A -> Link[LK2E] -> GSI 19 (level, high) -> IRQ 19 [ 38.323343] wl 0000:01:00.0: setting latency timer to 64 [ 38.328504] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 38.328887] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 38.329085] usbcore: registered new interface driver btusb [ 38.340258] Linux video capture interface: v2.00 [ 38.391463] lp: driver loaded but no devices found [ 38.613979] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 38.642675] acpi device:01: registered as cooling_device2 [ 38.642864] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6 [ 38.642938] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 38.643940] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 39.091682] type=1505 audit(1291082001.293:5): operation="profile_load" pid=835 name="/usr/share/gdm/guest-session/Xsession" [ 39.093946] type=1505 audit(1291082001.293:6): operation="profile_replace" pid=836 name="/sbin/dhclient3" [ 39.094270] type=1505 audit(1291082001.293:7): operation="profile_replace" pid=836 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 39.094456] type=1505 audit(1291082001.293:8): operation="profile_replace" pid=836 name="/usr/lib/connman/scripts/dhclient-script" [ 39.098760] type=1505 audit(1291082001.293:9): operation="profile_load" pid=837 name="/usr/bin/evince" [ 39.102998] type=1505 audit(1291082001.303:10): operation="profile_load" pid=837 name="/usr/bin/evince-previewer" [ 39.105563] type=1505 audit(1291082001.303:11): operation="profile_load" pid=837 name="/usr/bin/evince-thumbnailer" [ 39.226613] eth0: no link during initialization. [ 39.227277] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.076252] lib80211_crypt: registered algorithm 'TKIP' [ 40.078320] eth1: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.60.48.36 [ 40.107026] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 40.109275] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:0b.1/usb1/1-8/1-8:1.0/input/input8 [ 40.109358] usbcore: registered new interface driver uvcvideo [ 40.109362] USB Video Class driver (v0.1.0) [ 40.324886] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 21 [ 40.324894] alloc irq_desc for 21 on node 0 [ 40.324897] alloc kstat_irqs on node 0 [ 40.324910] nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 21 (level, high) -> IRQ 21 [ 40.324918] nvidia 0000:00:05.0: setting latency timer to 64 [ 40.324923] vgaarb: device changed decodes: PCI:0000:00:05.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 40.325184] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010 [ 40.442419] Bluetooth: L2CAP ver 2.14 [ 40.442422] Bluetooth: L2CAP socket layer initialized [ 40.705150] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 40.705154] Bluetooth: BNEP filters: protocol multicast [ 40.734668] Bridge firewalling registered [ 40.749346] Bluetooth: SCO (Voice Link) ver 0.6 [ 40.749350] Bluetooth: SCO socket layer initialized [ 40.827345] Console: switching to colour frame buffer device 80x30 [ 40.929357] ppdev: user-space parallel port driver [ 41.201575] Bluetooth: RFCOMM TTY layer initialized [ 41.201582] Bluetooth: RFCOMM socket layer initialized [ 41.201584] Bluetooth: RFCOMM ver 1.11 [ 41.705665] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 41.705674] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, high) -> IRQ 22 [ 41.705680] hda_intel: Disable MSI for Nvidia chipset [ 41.705716] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 49.842525] eth1: no IPv6 routers present [ 102.010035] Clocksource tsc unstable (delta = -88063012 ns) [ 1407.302625] lo: Disabled Privacy Extensions [ 1434.216669] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 1559.872533] CE: hpet increasing min_delta_ns to 15000 nsec [ 1902.310564] CE: hpet increasing min_delta_ns to 22500 nsec [ 7388.975102] lo: Disabled Privacy Extensions