[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-generic-pae (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #45-Ubuntu SMP Sat Oct 16 21:01:33 UTC 2010 (Ubuntu 2.6.32-25.45-generic-pae 2.6.32.21+drm33.7) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffef000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000007fffffc0 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x7ffef max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ffef000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fffffc0 (ACPI data) [ 0.000000] modified: 000000007fffffc0 - 0000000080000000 (ACPI NVS) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000 [ 0.000000] RAMDISK: 37864000 - 37fef50e [ 0.000000] Allocated new RAMDISK: 0093e000 - 010c950e [ 0.000000] Move RAMDISK from 0000000037864000 - 0000000037fef50d to 0093e000 - 010c950d [ 0.000000] ACPI: RSDP 000e5010 00014 (v00 OID_00) [ 0.000000] ACPI: RSDT 7fffc850 00030 (v01 INSYDE FACP_000 00000100 0000 00010200) [ 0.000000] ACPI: FACP 7ffffac0 00074 (v01 INSYDE FACP_000 00000100 0000 00010200) [ 0.000000] ACPI: DSDT 7fffc890 03221 (v01 INSYDE ATIRS480 00001000 INTL 20040116) [ 0.000000] ACPI: FACS 7fffffc0 00040 [ 0.000000] ACPI: APIC 7ffffb50 00068 (v01 INSYDE APIC_000 30303030 0000 00010200) [ 0.000000] ACPI: HPET 7ffffbc0 00038 (v01 INSYDE HPET_000 30303030 0000 30303030) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1157MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00009000 - 0000ff40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 0000935818] TEXT DATA BSS ==> [0000100000 - 0000935818] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000936000 - 000093d18c] BRK ==> [0000936000 - 000093d18c] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [000093e000 - 00010c950e] NEW RAMDISK ==> [000093e000 - 00010c950e] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0007ffef [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffef [ 0.000000] On node 0 totalpages: 524170 [ 0.000000] free_area_init_node: node 0, pgdat c07d8d60, node_mem_map c10cb000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2316 pages used for memmap [ 0.000000] HighMem zone: 294117 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ff80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c2200000 s39480 r0 d21960 u1048576 [ 0.000000] pcpu-alloc: s39480 r0 d21960 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520074 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic-pae root=UUID=c1e3e18c-aeda-4b61-a112-de178ac4e673 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10485420 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:0007ffef) [ 0.000000] Memory: 2051956k/2097084k available (4833k kernel code, 43784k reserved, 2220k data, 672k init, 1185732k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07e4000 - 0xc088c000 ( 672 kB) [ 0.000000] .data : 0xc05b87af - 0xc07e37c8 (2220 kB) [ 0.000000] .text : 0xc0100000 - 0xc05b87af (4833 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1799.981 MHz processor. [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.96 BogoMIPS (lpj=7199924) [ 0.008028] Security Framework initialized [ 0.008054] AppArmor: AppArmor initialized [ 0.008063] Mount-cache hash table entries: 512 [ 0.008212] Initializing cgroup subsys ns [ 0.008217] Initializing cgroup subsys cpuacct [ 0.008222] Initializing cgroup subsys memory [ 0.008230] Initializing cgroup subsys devices [ 0.008233] Initializing cgroup subsys freezer [ 0.008236] Initializing cgroup subsys net_cls [ 0.008255] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008259] CPU: L2 Cache: 128K (64 bytes/line) [ 0.008263] mce: CPU supports 5 MCE banks [ 0.008283] Performance Events: AMD PMU driver. [ 0.008288] ... version: 0 [ 0.008291] ... bit width: 48 [ 0.008293] ... generic registers: 4 [ 0.008295] ... value mask: 0000ffffffffffff [ 0.008298] ... max period: 00007fffffffffff [ 0.008300] ... fixed-purpose events: 0 [ 0.008302] ... event mask: 000000000000000f [ 0.008307] Checking 'hlt' instruction... OK. [ 0.024701] SMP alternatives: switching to UP code [ 0.032045] ACPI: Core revision 20090903 [ 0.040014] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040021] ftrace: allocating 22420 entries in 44 pages [ 0.048098] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.048919] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.090620] CPU0: Mobile AMD Sempron(tm) Processor 3000+ stepping 02 [ 0.092001] Brought up 1 CPUs [ 0.092001] Total of 1 processors activated (3599.96 BogoMIPS). [ 0.092001] CPU0 attaching NULL sched-domain. [ 0.092001] devtmpfs: initialized [ 0.092001] regulator: core version 0.5 [ 0.092001] Time: 8:49:02 Date: 10/22/10 [ 0.092001] NET: Registered protocol family 16 [ 0.092001] EISA bus registered [ 0.092001] ACPI: bus type pci registered [ 0.092001] PCI: PCI BIOS revision 2.10 entry at 0xe9bc4, last bus=2 [ 0.092001] PCI: Using configuration type 1 for base access [ 0.092001] bio: create slab at 0 [ 0.092001] ACPI: EC: Look up EC in DSDT [ 0.095530] ACPI: Interpreter enabled [ 0.095536] ACPI: (supports S0 S3 S4 S5) [ 0.095558] ACPI: Using IOAPIC for interrupt routing [ 0.098831] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.098993] ACPI: No dock devices found. [ 0.099158] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.099310] pci 0000:00:10.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.099336] pci 0000:00:10.0: supports D1 D2 [ 0.099338] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.099345] pci 0000:00:10.0: PME# disabled [ 0.099392] pci 0000:00:10.2: reg 10 32bit mmio: [0xd0000000-0xd00007ff] [ 0.099402] pci 0000:00:10.2: reg 14 32bit mmio: [0xd0004000-0xd0007fff] [ 0.099461] pci 0000:00:10.2: supports D1 D2 [ 0.099464] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot [ 0.099469] pci 0000:00:10.2: PME# disabled [ 0.099514] pci 0000:00:10.3: reg 10 32bit mmio: [0xd0008000-0xd0009fff] [ 0.100033] pci 0000:00:10.3: supports D1 D2 [ 0.100036] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot [ 0.100041] pci 0000:00:10.3: PME# disabled [ 0.100086] pci 0000:00:10.4: reg 10 32bit mmio: [0xd000a000-0xd000a0ff] [ 0.100096] pci 0000:00:10.4: reg 14 32bit mmio: [0xd000a100-0xd000a1ff] [ 0.100105] pci 0000:00:10.4: reg 18 32bit mmio: [0xd000a200-0xd000a2ff] [ 0.100154] pci 0000:00:10.4: supports D1 D2 [ 0.100157] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot [ 0.100163] pci 0000:00:10.4: PME# disabled [ 0.100212] pci 0000:00:11.0: reg 10 32bit mmio: [0xffffe000-0xffffffff] [ 0.100438] pci 0000:00:1b.0: reg 10 io port: [0xe000-0xe0ff] [ 0.100446] pci 0000:00:1b.0: reg 14 32bit mmio: [0xd000a300-0xd000a3ff] [ 0.100489] pci 0000:00:1b.0: PME# supported from D3hot D3cold [ 0.100494] pci 0000:00:1b.0: PME# disabled [ 0.100523] pci 0000:00:1c.0: reg 10 32bit mmio: [0xf8002000-0xf8002fff] [ 0.100579] pci 0000:00:1c.1: reg 10 32bit mmio: [0xf8003000-0xf8003fff] [ 0.100635] pci 0000:00:1c.2: reg 10 32bit mmio: [0xf8004000-0xf8004fff] [ 0.100710] pci 0000:00:1c.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.100763] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.100768] pci 0000:00:1c.3: PME# disabled [ 0.100817] pci 0000:00:1d.0: reg 10 64bit mmio: [0xd000c000-0xd000ffff] [ 0.100860] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.100865] pci 0000:00:1d.0: PME# disabled [ 0.101002] pci 0000:00:1e.1: quirk: region 1000-103f claimed by ali7101 ACPI [ 0.101071] pci 0000:00:1f.0: reg 20 io port: [0x1100-0x110f] [ 0.101126] pci 0000:01:05.0: reg 10 32bit mmio pref: [0x90000000-0x9fffffff] [ 0.101131] pci 0000:01:05.0: reg 14 io port: [0xc000-0xc0ff] [ 0.101136] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0000000-0xc000ffff] [ 0.101146] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.101156] pci 0000:01:05.0: supports D1 D2 [ 0.101174] pci 0000:00:01.0: bridge io port: [0xc000-0xdfff] [ 0.101178] pci 0000:00:01.0: bridge 32bit mmio: [0xc0000000-0xcfffffff] [ 0.101183] pci 0000:00:01.0: bridge 64bit mmio pref: [0x90000000-0x9fffffff] [ 0.101254] pci 0000:00:19.0: bridge io port: [0xa000-0xbfff] [ 0.101259] pci 0000:00:19.0: bridge 32bit mmio: [0xb8000000-0xbfffffff] [ 0.101264] pci 0000:00:19.0: bridge 32bit mmio pref: [0x88000000-0x8fffffff] [ 0.101288] pci_bus 0000:00: on NUMA node 0 [ 0.101294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.101408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GFX_._PRT] [ 0.101478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT] [ 0.116299] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 0.116444] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15) [ 0.116585] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 14 15) [ 0.116727] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15) [ 0.116868] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 14 15) [ 0.117008] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 14 15) [ 0.117149] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 14 15) [ 0.117286] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.117428] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 *5 7 10 11 14 15) [ 0.117550] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.117553] vgaarb: loaded [ 0.117689] SCSI subsystem initialized [ 0.117768] libata version 3.00 loaded. [ 0.117849] usbcore: registered new interface driver usbfs [ 0.117868] usbcore: registered new interface driver hub [ 0.117895] usbcore: registered new device driver usb [ 0.118039] ACPI: WMI: Mapper loaded [ 0.118042] PCI: Using ACPI for IRQ routing [ 0.118239] NetLabel: Initializing [ 0.118242] NetLabel: domain hash size = 128 [ 0.118244] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.118259] NetLabel: unlabeled traffic allowed by default [ 0.120392] AppArmor: AppArmor Filesystem Enabled [ 0.120414] pnp: PnP ACPI init [ 0.120433] ACPI: bus type pnp registered [ 0.120868] pnp 00:08: IRQ 13 override to edge, high [ 0.121209] pnp: PnP ACPI: found 9 devices [ 0.121212] ACPI: ACPI bus type pnp unregistered [ 0.121216] PnPBIOS: Disabled by ACPI PNP [ 0.121230] system 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 0.121235] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.121238] system 00:05: iomem range 0xd0000-0xdefff has been reserved [ 0.121242] system 00:05: iomem range 0xe0000000-0xe0ffffff has been reserved [ 0.121246] system 00:05: iomem range 0xfeb00000-0xfeb00fff has been reserved [ 0.121250] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.121253] system 00:05: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.121257] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.121265] system 00:07: ioport range 0x480-0x48f has been reserved [ 0.121268] system 00:07: ioport range 0x330-0x331 has been reserved [ 0.121272] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.121275] system 00:07: ioport range 0x1000-0x107f could not be reserved [ 0.121279] system 00:07: ioport range 0x1400-0x140f has been reserved [ 0.156700] Switching to clocksource acpi_pm [ 0.156844] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.156848] pci 0000:00:01.0: IO window: 0xc000-0xdfff [ 0.156852] pci 0000:00:01.0: MEM window: 0xc0000000-0xcfffffff [ 0.156856] pci 0000:00:01.0: PREFETCH window: 0x00000090000000-0x0000009fffffff [ 0.156862] pci 0000:00:10.0: CardBus bridge, secondary bus 0000:03 [ 0.156865] pci 0000:00:10.0: IO window: 0x001800-0x0018ff [ 0.156871] pci 0000:00:10.0: IO window: 0x001c00-0x001cff [ 0.156877] pci 0000:00:10.0: PREFETCH window: 0x80000000-0x83ffffff [ 0.156883] pci 0000:00:10.0: MEM window: 0x84000000-0x87ffffff [ 0.156889] pci 0000:00:19.0: PCI bridge, secondary bus 0000:02 [ 0.156893] pci 0000:00:19.0: IO window: 0xa000-0xbfff [ 0.156899] pci 0000:00:19.0: MEM window: 0xb8000000-0xbfffffff [ 0.156904] pci 0000:00:19.0: PREFETCH window: 0x88000000-0x8fffffff [ 0.156925] pci 0000:00:10.0: enabling device (0000 -> 0003) [ 0.156933] alloc irq_desc for 17 on node -1 [ 0.156935] alloc kstat_irqs on node -1 [ 0.156943] pci 0000:00:10.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.156952] pci 0000:00:10.0: setting latency timer to 64 [ 0.156961] pci 0000:00:19.0: setting latency timer to 64 [ 0.156966] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.156969] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.156973] pci_bus 0000:01: resource 0 io: [0xc000-0xdfff] [ 0.156976] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xcfffffff] [ 0.156979] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x9fffffff] [ 0.156983] pci_bus 0000:03: resource 0 io: [0x1800-0x18ff] [ 0.156986] pci_bus 0000:03: resource 1 io: [0x1c00-0x1cff] [ 0.156989] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff] [ 0.156992] pci_bus 0000:03: resource 3 mem: [0x84000000-0x87ffffff] [ 0.156996] pci_bus 0000:02: resource 0 io: [0xa000-0xbfff] [ 0.156999] pci_bus 0000:02: resource 1 mem: [0xb8000000-0xbfffffff] [ 0.157002] pci_bus 0000:02: resource 2 pref mem [0x88000000-0x8fffffff] [ 0.157041] NET: Registered protocol family 2 [ 0.157146] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.157561] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.158906] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.159573] TCP: Hash tables configured (established 131072 bind 65536) [ 0.159576] TCP reno registered [ 0.159688] NET: Registered protocol family 1 [ 0.159708] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.159714] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.228059] pci 0000:01:05.0: Boot video device [ 0.228253] cpufreq-nforce2: No nForce2 chipset. [ 0.228288] Scanning for low memory corruption every 60 seconds [ 0.228421] audit: initializing netlink socket (disabled) [ 0.228437] type=2000 audit(1287737341.228:1): initialized [ 0.240451] Trying to unpack rootfs image as initramfs... [ 0.256253] highmem bounce pool size: 64 pages [ 0.256261] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.257985] VFS: Disk quotas dquot_6.5.2 [ 0.258062] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.258743] fuse init (API version 7.13) [ 0.258848] msgmni has been set to 1693 [ 0.264209] alg: No test for stdrng (krng) [ 0.264307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.264311] io scheduler noop registered [ 0.264313] io scheduler anticipatory registered [ 0.264316] io scheduler deadline registered [ 0.264359] io scheduler cfq registered (default) [ 0.264489] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.264513] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.266613] ACPI: AC Adapter [AC] (on-line) [ 0.266713] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.266722] ACPI: Power Button [PBTN] [ 0.266769] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.266773] ACPI: Sleep Button [SBTN] [ 0.266819] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.272131] ACPI: Lid Switch [LID] [ 0.272235] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.272240] ACPI: Power Button [PWRF] [ 0.272516] processor LNXCPU:00: registered as cooling_device0 [ 0.275705] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.277205] brd: module loaded [ 0.277749] loop: module loaded [ 0.277876] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.278089] alloc irq_desc for 21 on node -1 [ 0.278092] alloc kstat_irqs on node -1 [ 0.278100] pata_acpi 0000:00:1f.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.278161] pata_acpi 0000:00:1f.0: PCI INT A disabled [ 0.278502] Fixed MDIO Bus: probed [ 0.278539] PPP generic driver version 2.4.2 [ 0.278601] tun: Universal TUN/TAP device driver, 1.6 [ 0.278603] tun: (C) 1999-2004 Max Krasnyansky [ 0.278707] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.278729] ehci_hcd 0000:00:1c.3: enabling device (0000 -> 0002) [ 0.278735] alloc irq_desc for 23 on node -1 [ 0.278738] alloc kstat_irqs on node -1 [ 0.278745] ehci_hcd 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.278767] ehci_hcd 0000:00:1c.3: EHCI Host Controller [ 0.278804] ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 1 [ 0.278837] ehci_hcd 0000:00:1c.3: debug port 1 [ 0.284472] isapnp: Scanning for PnP cards... [ 0.290118] ACPI: Battery Slot [BAT0] (battery absent) [ 0.339748] ehci_hcd 0000:00:1c.3: irq 23, io mem 0xa0001000 [ 0.348298] ehci_hcd 0000:00:1c.3: USB 2.0 started, EHCI 1.00 [ 0.348436] usb usb1: configuration #1 chosen from 1 choice [ 0.348470] hub 1-0:1.0: USB hub found [ 0.348483] hub 1-0:1.0: 8 ports detected [ 0.348579] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.348604] ohci_hcd 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.348625] ohci_hcd 0000:00:1c.0: OHCI Host Controller [ 0.348675] ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 2 [ 0.348716] ohci_hcd 0000:00:1c.0: irq 17, io mem 0xf8002000 [ 0.429841] usb usb2: configuration #1 chosen from 1 choice [ 0.429882] hub 2-0:1.0: USB hub found [ 0.429897] hub 2-0:1.0: 3 ports detected [ 0.429957] alloc irq_desc for 18 on node -1 [ 0.429960] alloc kstat_irqs on node -1 [ 0.429968] ohci_hcd 0000:00:1c.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.429988] ohci_hcd 0000:00:1c.1: OHCI Host Controller [ 0.430031] ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 3 [ 0.430071] ohci_hcd 0000:00:1c.1: irq 18, io mem 0xf8003000 [ 0.517854] usb usb3: configuration #1 chosen from 1 choice [ 0.517895] hub 3-0:1.0: USB hub found [ 0.517909] hub 3-0:1.0: 3 ports detected [ 0.517969] alloc irq_desc for 19 on node -1 [ 0.517972] alloc kstat_irqs on node -1 [ 0.517980] ohci_hcd 0000:00:1c.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.518000] ohci_hcd 0000:00:1c.2: OHCI Host Controller [ 0.518043] ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 4 [ 0.518083] ohci_hcd 0000:00:1c.2: irq 19, io mem 0xf8004000 [ 0.606050] usb usb4: configuration #1 chosen from 1 choice [ 0.606084] hub 4-0:1.0: USB hub found [ 0.606098] hub 4-0:1.0: 3 ports detected [ 0.606161] uhci_hcd: USB Universal Host Controller Interface driver [ 0.606249] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.612703] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.612717] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.612899] mice: PS/2 mouse device common for all mice [ 0.613145] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.613208] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.613335] device-mapper: uevent: version 1.0.3 [ 0.614989] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.616678] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.618992] device-mapper: multipath: version 1.1.0 loaded [ 0.618998] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.619208] EISA: Probing bus 0 at eisa.0 [ 0.619218] Cannot allocate resource for EISA slot 1 [ 0.619256] EISA: Detected 0 cards. [ 0.624288] cpuidle: using governor ladder [ 0.624349] cpuidle: using governor menu [ 0.624837] TCP cubic registered [ 0.625010] NET: Registered protocol family 10 [ 0.625548] lo: Disabled Privacy Extensions [ 0.625936] NET: Registered protocol family 17 [ 0.625980] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00) [ 0.626065] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa [ 0.626068] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc [ 0.626070] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13 [ 0.626118] Using IPI No-Shortcut mode [ 0.626216] PM: Resume from disk failed. [ 0.626229] registered taskstats version 1 [ 0.626537] Magic number: 14:312:827 [ 0.626622] rtc_cmos 00:03: setting system clock to 2010-10-22 08:49:02 UTC (1287737342) [ 0.626625] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.626628] EDD information not available. [ 0.745851] Freeing initrd memory: 7725k freed [ 0.884671] isapnp: No Plug & Play device found [ 0.884690] Freeing unused kernel memory: 672k freed [ 0.885492] Write protecting the kernel text: 4836k [ 0.885557] Write protecting the kernel read-only data: 1880k [ 0.913765] udev: starting version 151 [ 0.996265] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 1.187076] pata_ali 0000:00:1f.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.187345] scsi0 : pata_ali [ 1.192179] scsi1 : pata_ali [ 1.193827] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 1.193831] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 1.194309] ohci1394 0000:00:10.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.238855] usb 2-2: configuration #1 chosen from 1 choice [ 1.251049] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[d0000000-d00007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.356372] ata1.00: ATA-6: WDC WD800UE-22HCT0, 09.07D09, max UDMA/100 [ 1.356377] ata1.00: 156301488 sectors, multi 16: LBA [ 1.364287] ata1.00: configured for UDMA/100 [ 1.364415] scsi 0:0:0:0: Direct-Access ATA WDC WD800UE-22HC 09.0 PQ: 0 ANSI: 5 [ 1.364602] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.365051] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.365095] sd 0:0:0:0: [sda] Write Protect is off [ 1.365099] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.365120] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.365267] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3 [ 1.500594] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.528368] ata2.00: ATAPI: Slimtype DVDRW SOSW-833S, V9S1, max UDMA/33 [ 1.528394] ata2.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 1.528397] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 1.544288] ata2.00: configured for UDMA/33 [ 1.545318] scsi 1:0:0:0: CD-ROM Slimtype DVDRW SOSW-833S V9S1 PQ: 0 ANSI: 5 [ 1.548770] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.548775] Uniform CD-ROM driver Revision: 3.20 [ 1.548921] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.548988] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.565144] usbcore: registered new interface driver hiddev [ 1.580112] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1c.0/usb2/2-2/2-2:1.0/input/input6 [ 1.580247] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1c.0-2/input0 [ 1.580276] usbcore: registered new interface driver usbhid [ 1.580279] usbhid: v2.6:USB HID core driver [ 2.520157] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040d0010036794e] [ 2.722001] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 5.274202] Adding 999416k swap on /dev/sda9. Priority:-1 extents:1 across:999416k [ 5.619832] udev: starting version 151 [ 6.471465] type=1505 audit(1287730148.344:2): operation="profile_load" pid=454 name="/sbin/dhclient3" [ 6.471809] type=1505 audit(1287730148.344:3): operation="profile_load" pid=454 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 6.471998] type=1505 audit(1287730148.344:4): operation="profile_load" pid=454 name="/usr/lib/connman/scripts/dhclient-script" [ 6.761642] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 6.761687] alloc irq_desc for 20 on node -1 [ 6.761690] alloc kstat_irqs on node -1 [ 6.761699] uli526x 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 6.791982] eth0: ULi M5263 at pci0000:00:1b.0, 00:40:d0:85:2d:43, irq 20. [ 6.792096] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.262991] ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS? [ 7.262997] ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted. [ 7.656163] tifm_7xx1 0000:00:10.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.661583] sdhci: Secure Digital Host Controller Interface driver [ 7.661588] sdhci: Copyright(c) Pierre Ossman [ 7.695825] yenta_cardbus 0000:00:10.0: CardBus bridge found [1631:c00a] [ 7.695849] yenta_cardbus 0000:00:10.0: Enabling burst memory read transactions [ 7.695855] yenta_cardbus 0000:00:10.0: Using CSCINT to route CSC interrupts to PCI [ 7.695858] yenta_cardbus 0000:00:10.0: Routing CardBus interrupts to PCI [ 7.695865] yenta_cardbus 0000:00:10.0: TI: mfunc 0x01ac1b22, devctl 0x66 [ 7.798621] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 0xa04713/0x200000 [ 7.829513] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 7.926484] yenta_cardbus 0000:00:10.0: ISA IRQ mask 0x0cf8, PCI irq 17 [ 7.926490] yenta_cardbus 0000:00:10.0: Socket status: 30000006 [ 7.928358] ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr [ 7.928412] ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted. [ 7.928691] sdhci-pci 0000:00:10.4: SDHCI controller found [104c:8034] (rev 0) [ 7.928711] sdhci-pci 0000:00:10.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.928785] Registered led device: mmc0:: [ 7.928824] mmc0: SDHCI controller on PCI [0000:00:10.4] using PIO [ 7.928861] Registered led device: mmc1:: [ 7.928886] mmc1: SDHCI controller on PCI [0000:00:10.4] using PIO [ 7.928927] Registered led device: mmc2:: [ 7.928953] mmc2: SDHCI controller on PCI [0000:00:10.4] using PIO [ 7.947446] Linux agpgart interface v0.103 [ 7.951348] lp: driver loaded but no devices found [ 8.016060] [drm] Initialized drm 1.1.0 20060810 [ 8.541318] cfg80211: Calling CRDA to update world regulatory domain [ 8.874593] cfg80211: World regulatory domain updated: [ 8.874598] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.874603] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.874606] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.874609] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.874613] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.874616] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.067287] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 9.069813] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 9.070811] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 9.071687] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 9.072869] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 9.286646] [drm] radeon defaulting to kernel modesetting. [ 9.286652] [drm] radeon kernel modesetting enabled. [ 9.286735] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.290427] [drm] radeon: Initializing kernel modesetting. [ 9.290516] [drm] register mmio base: 0xC0000000 [ 9.290518] [drm] register mmio size: 65536 [ 9.292083] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 9.292103] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?) [ 9.292155] [drm] Generation 2 PCI interface, using max accessible memory [ 9.292158] [drm] radeon: VRAM 128M [ 9.292160] [drm] radeon: VRAM from 0x80000000 to 0x87FFFFFF [ 9.292163] [drm] radeon: GTT 32M [ 9.292165] [drm] radeon: GTT from 0x88000000 to 0x89FFFFFF [ 9.292190] [drm] radeon: irq initialized. [ 9.292268] [drm] Detected VRAM RAM=128M, BAR=256M [ 9.292274] [drm] RAM width 128bits DDR [ 9.292377] [TTM] Zone kernel: Available graphics memory: 437780 kiB. [ 9.292380] [TTM] Zone highmem: Available graphics memory: 1030646 kiB. [ 9.292400] [drm] radeon: 128M of VRAM memory ready [ 9.292403] [drm] radeon: 32M of GTT memory ready. [ 9.292430] [drm] GART: num cpu pages 8192, num gpu pages 8192 [ 9.292902] [drm] radeon: 2 quad pipes, 1 z pipes initialized. [ 9.292916] [drm] radeon: cp idle (0x10000C03) [ 9.293066] [drm] Loading R300 Microcode [ 9.293476] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 9.492125] [drm] radeon: ring at 0x0000000088000000 [ 9.492145] [drm] ring test succeeded in 1 usecs [ 9.492277] [drm] radeon: ib pool ready. [ 9.492349] [drm] ib test succeeded in 0 usecs [ 9.492408] [drm] Default TV standard: PAL [ 9.492410] [drm] 14.318180000 MHz TV ref clk [ 9.492497] [drm] Panel ID String: LP171W01 [ 9.492500] [drm] Panel Size 1440x900 [ 9.492549] [drm] Default TV standard: PAL [ 9.492551] [drm] 14.318180000 MHz TV ref clk [ 9.492585] [drm] Radeon Display Connectors [ 9.492587] [drm] Connector 0: [ 9.492589] [drm] VGA [ 9.492592] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 9.492594] [drm] Encoders: [ 9.492596] [drm] CRT1: INTERNAL_DAC2 [ 9.492598] [drm] Connector 1: [ 9.492599] [drm] LVDS [ 9.492602] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [ 9.492604] [drm] Encoders: [ 9.492606] [drm] LCD1: INTERNAL_LVDS [ 9.492608] [drm] Connector 2: [ 9.492610] [drm] S-video [ 9.492611] [drm] Encoders: [ 9.492613] [drm] TV1: INTERNAL_DAC2 [ 9.526389] rt2500pci 0000:00:11.0: enabling device (0000 -> 0002) [ 9.526400] rt2500pci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 9.526410] rt2500pci 0000:00:11.0: setting latency timer to 64 [ 9.574096] [drm] fb mappable at 0x90040000 [ 9.574100] [drm] vram apper at 0x90000000 [ 9.574102] [drm] size 5184000 [ 9.574104] [drm] fb depth is 24 [ 9.574106] [drm] pitch is 5760 [ 9.576306] fb0: radeondrmfb frame buffer device [ 9.576311] registered panic notifier [ 9.576319] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 [ 10.552123] phy0: Selected rate control algorithm 'minstrel' [ 10.552904] Registered led device: rt2500pci-phy0::radio [ 10.552924] Registered led device: rt2500pci-phy0::quality [ 10.758023] vga16fb: initializing [ 10.758031] vga16fb: mapped to 0xc00a0000 [ 10.758037] vga16fb: not registering due to another framebuffer present [ 10.969517] Console: switching to colour frame buffer device 180x56 [ 11.142878] alloc irq_desc for 22 on node -1 [ 11.142882] alloc kstat_irqs on node -1 [ 11.142891] HDA Intel 0000:00:1d.0: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 11.317484] hda_codec: ALC880: BIOS auto-probing. [ 11.318379] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1d.0/input/input8 [ 14.569102] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 16.271269] type=1505 audit(1287730158.141:5): operation="profile_load" pid=769 name="/usr/share/gdm/guest-session/Xsession" [ 16.273815] type=1505 audit(1287730158.145:6): operation="profile_replace" pid=776 name="/sbin/dhclient3" [ 16.274177] type=1505 audit(1287730158.145:7): operation="profile_replace" pid=776 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.274379] type=1505 audit(1287730158.145:8): operation="profile_replace" pid=776 name="/usr/lib/connman/scripts/dhclient-script" [ 16.540940] type=1505 audit(1287730158.413:9): operation="profile_load" pid=777 name="/usr/bin/evince" [ 16.546335] type=1505 audit(1287730158.417:10): operation="profile_load" pid=777 name="/usr/bin/evince-previewer" [ 16.549578] type=1505 audit(1287730158.421:11): operation="profile_load" pid=777 name="/usr/bin/evince-thumbnailer" [ 16.618117] type=1505 audit(1287730158.489:12): operation="profile_load" pid=779 name="/usr/lib/cups/backend/cups-pdf" [ 16.618551] type=1505 audit(1287730158.489:13): operation="profile_load" pid=779 name="/usr/sbin/cupsd" [ 16.840176] type=1505 audit(1287730158.713:14): operation="profile_load" pid=783 name="/usr/sbin/tcpdump" [ 17.764934] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.848799] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.848574] uli526x: eth0 NIC Link is Down [ 21.176597] ppdev: user-space parallel port driver [ 84.088046] Clocksource tsc unstable (delta = -132881721 ns) [ 396.964066] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 397.102699] usb 1-3: configuration #1 chosen from 1 choice [ 397.190144] Initializing USB Mass Storage driver... [ 397.190381] scsi2 : SCSI emulation for USB Mass Storage devices [ 397.190771] usbcore: registered new interface driver usb-storage [ 397.190779] USB Mass Storage support registered. [ 397.202871] usb-storage: device found at 3 [ 397.202878] usb-storage: waiting for device to settle before scanning [ 402.201184] usb-storage: device scan complete [ 402.202428] scsi 2:0:0:0: Direct-Access USB DISK 2.0 1219 PQ: 0 ANSI: 0 CCS [ 402.207607] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 402.213772] sd 2:0:0:0: [sdb] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 402.214650] sd 2:0:0:0: [sdb] Write Protect is off [ 402.214662] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 402.214669] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 402.224153] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 402.224168] sdb: sdb1 [ 402.263150] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 402.263163] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 683.134608] wlan0: deauthenticating from 00:11:d8:0e:32:e3 by local choice (reason=3) [ 683.135273] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 683.137565] wlan0: direct probe responded [ 683.137577] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 683.139905] wlan0: authenticated [ 683.139951] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 683.143745] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 683.143754] wlan0: associated [ 683.145614] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 683.332080] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 683.836062] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 684.425426] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 684.696056] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 684.968044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 685.072094] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 685.216046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 685.328063] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 685.520650] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 685.668081] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 685.908052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 686.604047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 686.900041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 687.016046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 687.440042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 688.836053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 689.572032] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 689.808039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 690.504043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 690.652040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 691.108852] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 691.572057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 692.836056] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 693.656036] wlan0: no IPv6 routers present [ 693.656065] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 697.116059] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 699.972048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 700.492042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 703.244039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 705.507934] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 706.496049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 708.996046] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 710.332758] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 710.334779] wlan0: direct probe responded [ 710.334791] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 710.337097] wlan0: authenticated [ 710.337138] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 710.344509] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 710.344518] wlan0: associated [ 710.524055] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 710.728057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 710.928080] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 711.236030] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 711.556040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 712.248045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 712.544043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 713.420044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 713.728074] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 714.484049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 715.988070] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 716.396045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 716.896051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 717.624057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 718.540058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 719.064040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 722.452040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 722.756038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 723.012038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 728.428048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 728.748058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 739.740040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 746.488040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 748.988044] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 750.325991] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 750.328041] wlan0: direct probe responded [ 750.328052] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 750.330053] wlan0: authenticated [ 750.330097] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 750.332460] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 750.332470] wlan0: associated [ 750.528039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 754.188040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 754.768039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 759.676041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 769.732051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 775.280060] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 780.156082] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 782.200043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 782.408065] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 782.824044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 783.536053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 784.700067] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 785.320038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 786.388033] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 787.064029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 790.120125] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 790.484040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 791.644053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 791.832040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 792.036054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 800.452068] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 804.328033] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 806.552029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 809.052048] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 810.395377] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 810.397390] wlan0: direct probe responded [ 810.397401] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 810.399436] wlan0: authenticated [ 810.399467] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 810.401829] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 810.401838] wlan0: associated [ 810.580039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 811.608055] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 814.680040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 814.976051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 819.684054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 829.676040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 844.712040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 844.984041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 845.308039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 845.492039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 849.796039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 879.696055] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 886.488061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 888.988063] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 890.324754] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 890.326776] wlan0: direct probe responded [ 890.326788] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 890.328843] wlan0: authenticated [ 890.328886] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 890.331185] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 890.331194] wlan0: associated [ 890.512041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 891.588055] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 895.264038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 895.484060] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 896.144032] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 899.744046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 900.940059] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 904.728043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 904.992039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 905.528043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 906.420074] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 906.908040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 909.060267] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 909.552058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 910.292037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 912.612039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 912.920037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 914.544284] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 914.840043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 921.164046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 923.976061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 925.576050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 934.276042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 934.804039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 941.328067] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 942.020040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 943.640061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 944.460085] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 944.768061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 947.468056] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 947.880053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 948.528045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 954.124029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 955.212048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 955.752046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 957.880057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 958.160049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 958.536040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 963.056067] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 963.404041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 965.104046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 966.480039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 967.636047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 973.112059] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 978.012040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 979.832039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 981.324047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 986.472039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 988.972077] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 990.308763] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 990.310792] wlan0: direct probe responded [ 990.310804] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 990.312826] wlan0: authenticated [ 990.312868] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 990.315478] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 990.315487] wlan0: associated [ 990.516042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 991.544049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 992.808050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 992.988032] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 994.316051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 994.584046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 994.804062] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 995.252038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 999.720060] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1000.424040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1003.276030] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1003.396039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1005.508050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1007.024043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1009.832066] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1010.328053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1010.828047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1011.008046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1011.596043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1011.972041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1013.036064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1016.248055] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1016.964043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1020.932064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1021.268046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1024.804070] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1028.924069] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1034.028036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1036.916059] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1039.804040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1044.852066] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1045.088069] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1046.796040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1047.764019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1048.436040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1052.708064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1052.960047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1053.424049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1054.800055] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1058.032042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1059.836040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1060.920053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1065.916048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1068.640049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1071.708041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1072.344029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1079.436040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1084.776045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1091.236049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1091.772022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1091.952197] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1092.672072] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1092.980062] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1096.192074] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1097.460040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1098.072061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1099.800056] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1100.920069] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1106.492031] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 1108.992052] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 1110.328761] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 1110.330783] wlan0: direct probe responded [ 1110.330794] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 1110.332885] wlan0: authenticated [ 1110.332927] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 1110.335236] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 1110.335246] wlan0: associated [ 1110.516044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1110.712045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1111.560053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1112.412042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1112.812043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1114.796045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1115.760057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1117.460040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1121.016043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1124.940064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1126.828058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1127.156040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1129.820081] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1130.088060] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1137.216048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1138.428040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1139.240057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1140.952064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1144.792056] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1145.180045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1148.932065] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1149.400042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1149.768039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1150.868202] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1154.172038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1154.632048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1154.984040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1156.352063] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1159.620041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1159.864039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1160.340072] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1160.812039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1161.364036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1165.252040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1165.868039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1166.176067] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1172.968075] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1174.836042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1179.756071] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1180.908061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1183.620057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1184.400035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1184.860031] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1185.524040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1185.632052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1185.904050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1187.044031] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1188.956061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1190.020049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1191.432042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1194.236041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1195.976059] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1196.932054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1197.616112] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1201.104062] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1204.920052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1208.636040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1215.536040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1219.788040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1224.716053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1226.552056] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 1229.052055] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 1230.388764] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 1230.390787] wlan0: direct probe responded [ 1230.390798] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 1230.392796] wlan0: authenticated [ 1230.392839] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 1230.395135] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 1230.395144] wlan0: associated [ 1230.576040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1231.692057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1232.328038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1233.600074] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1243.048049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1253.580040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1255.440043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1259.980067] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1261.164042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1262.052026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1264.476042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1264.872063] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1266.716040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1268.112039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1272.344029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1283.560040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1284.108042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1285.912040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1299.780039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1309.816040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1314.832047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1316.864043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1317.088069] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1317.200047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1317.772177] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1318.008051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1318.976054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1320.948047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1323.860053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1333.084027] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1334.024074] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1335.112058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1336.304056] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1337.500041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1339.776040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1341.340051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1346.472059] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 1348.972044] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 1350.310022] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 1350.312373] wlan0: direct probe responded [ 1350.312384] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 1350.314228] wlan0: authenticated [ 1350.314271] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 1350.316715] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 1350.316724] wlan0: associated [ 1350.512060] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1351.168048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1352.092045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1353.244042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1353.444039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1353.648040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1357.524043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1357.844064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1358.056041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1358.324148] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1358.504030] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1358.768041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1361.256080] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1361.632032] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1362.392040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1382.440033] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1382.632059] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1382.836045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1387.644047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1394.124047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1419.800068] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1449.216057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1455.860044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1466.492055] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 1468.992057] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 1470.329425] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 1470.331416] wlan0: direct probe responded [ 1470.331423] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 1470.333561] wlan0: authenticated [ 1470.333589] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 1470.335992] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 1470.336028] wlan0: associated [ 1470.528062] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1473.604057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1475.676042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1476.424368] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1478.164053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1479.648061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1480.160048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1482.296075] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1484.768053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1485.448063] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1485.792047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1487.840056] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1488.864052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1491.132046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1497.308062] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1499.052054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1502.608049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1503.808051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1504.548052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1504.996060] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1505.352056] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1505.668058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1506.224048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1506.668053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1508.616051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1509.212051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1510.688050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1513.688051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1519.652052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1522.868044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1523.172041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1526.316029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1526.424029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1528.124050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1529.484051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1539.824064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1550.096053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1551.312049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1551.680050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1555.084046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1555.620044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1556.964047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1557.280044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1561.840029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1572.296046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1575.196039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1576.028038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1580.432036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1580.748037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1581.376045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1586.508040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 1589.008047] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 1590.351573] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 1590.353586] wlan0: direct probe responded [ 1590.353598] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 1590.355845] wlan0: authenticated [ 1590.355876] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 1590.358206] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 1590.358215] wlan0: associated [ 1590.552040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1591.272069] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1592.952032] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1593.056039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1599.368036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1599.916037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1602.296048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1613.192048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1613.600048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1614.420039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1614.932041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1617.320046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1632.312040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1637.320040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1647.304040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1657.328051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1659.344123] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1663.936260] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1677.308040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1682.380037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1689.332048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1689.600046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1694.608045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1696.280045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1696.568039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1696.820047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1697.744040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1701.224041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1706.552057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 1709.052046] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 1710.390415] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 1710.392456] wlan0: direct probe responded [ 1710.392467] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 1710.394641] wlan0: authenticated [ 1710.394684] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 1710.396984] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 1710.396993] wlan0: associated [ 1710.592039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1711.092064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1713.064040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1719.756037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1722.308040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1723.280040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1725.504053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1727.984047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1747.508045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1747.992133] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1763.032047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1767.316047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1767.888327] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1779.768089] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1780.424054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1780.692048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1781.064045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1781.304043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1781.528058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1787.828035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1788.104057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1789.996037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1790.640038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1790.828044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1791.168053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1792.344040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1796.600059] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1797.304029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1799.888241] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1802.372043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1803.604275] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1804.756042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1806.672039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1810.236041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1811.968046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1812.364041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1812.988048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1813.784057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1814.148398] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1814.384053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1816.036049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1816.492042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1819.524046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1820.312049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1820.596035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1820.784041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1826.488042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 1828.988062] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 1830.324841] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 1830.326862] wlan0: direct probe responded [ 1830.326874] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 1830.328848] wlan0: authenticated [ 1830.328892] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 1830.331205] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 1830.331214] wlan0: associated [ 1830.512051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1830.640043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1830.844042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1830.976038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1831.212068] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1831.528058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1832.320042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1833.600043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1833.852034] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1834.260041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1835.484040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1836.236040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1837.672040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1840.040040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1840.684051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1841.520068] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1842.304040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1857.296055] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1858.208039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1858.420054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1863.392045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1863.640045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1864.380043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1864.564050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1876.276132] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1879.352039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1879.656072] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1881.256039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1887.308039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1899.792059] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1902.692053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1903.396046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1903.976052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1906.188058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1910.612053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1911.240056] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1911.648042] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1913.896067] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1914.156054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1914.908040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1917.324040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1918.020040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1921.220040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1925.844052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1929.224040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1932.336054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1946.488062] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 1948.988066] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 1950.325708] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 1950.327696] wlan0: direct probe responded [ 1950.327703] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 1950.329715] wlan0: authenticated [ 1950.329743] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 1950.332264] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 1950.332269] wlan0: associated [ 1950.520040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1951.576040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1951.928061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1953.076068] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1956.628037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 1987.180051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2002.980039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2004.592071] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2005.088065] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2006.608046] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2007.320061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2009.384039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2010.640041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2012.072058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2013.812067] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2014.428043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2025.544040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2029.892050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2031.732041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2034.768048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2043.168289] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2066.492040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 2068.992061] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 2070.339359] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 2070.341375] wlan0: direct probe responded [ 2070.341386] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 2070.343487] wlan0: authenticated [ 2070.343518] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 2070.345921] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 2070.345930] wlan0: associated [ 2070.528062] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2071.644039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2079.828040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2110.180066] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2139.836047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2170.180048] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2186.492041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 2188.992046] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 2190.328757] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 2190.330779] wlan0: direct probe responded [ 2190.330790] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 2190.332781] wlan0: authenticated [ 2190.332823] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 2190.335120] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 2190.335129] wlan0: associated [ 2190.516068] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2191.568050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2199.848514] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2230.180040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2247.651262] wlan0: deauthenticating from 00:11:d8:0e:32:e3 by local choice (reason=3) [ 2298.709276] wlan0: deauthenticating from 00:11:d8:0e:32:e3 by local choice (reason=3) [ 2298.908186] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 2298.910208] wlan0: direct probe responded [ 2298.910215] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 2298.913980] wlan0: authenticated [ 2298.915149] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 2298.917285] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 2298.917295] wlan0: associated [ 2299.096063] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2300.120053] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2304.192041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2304.524037] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2304.712058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2304.964049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2305.164066] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2305.344035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2305.648051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2306.064058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2306.392052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2307.072040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2307.980105] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2308.620547] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2309.088051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2310.652051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2311.984045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2323.336075] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2391.736050] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2396.736039] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2416.944181] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2417.828029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2421.612051] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2426.552062] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 2429.052063] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 2430.390031] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 2430.392344] wlan0: direct probe responded [ 2430.392355] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 2430.394053] wlan0: authenticated [ 2430.394095] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 2430.396385] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 2430.396395] wlan0: associated [ 2430.588049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2432.096061] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2432.704075] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2439.828034] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2447.136035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2452.112057] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2452.440027] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2452.652052] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2452.968045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2453.280033] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2453.596030] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2453.912044] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2454.228486] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2454.468063] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2466.492035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 3 (-16). [ 2468.992042] No probe response from AP 00:11:d8:0e:32:e3 after 500ms, disconnecting. [ 2470.330250] wlan0: direct probe to AP 00:11:d8:0e:32:e3 (try 1) [ 2470.332357] wlan0: direct probe responded [ 2470.332369] wlan0: authenticate with AP 00:11:d8:0e:32:e3 (try 1) [ 2470.334460] wlan0: authenticated [ 2470.334504] wlan0: associate with AP 00:11:d8:0e:32:e3 (try 1) [ 2470.336778] wlan0: RX AssocResp from 00:11:d8:0e:32:e3 (capab=0x411 status=0 aid=1) [ 2470.336787] wlan0: associated [ 2470.584045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2487.568055] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2497.112041] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2497.284086] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2498.308049] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2500.356640] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2501.552035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2504.452040] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 2576.860058] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).