[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic-pae (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 15:37:22 UTC 2010 (Ubuntu 2.6.32-24.42-generic-pae 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfc69000 (usable) [ 0.000000] BIOS-e820: 00000000bfc69000 - 00000000bfcbf000 (reserved) [ 0.000000] BIOS-e820: 00000000bfcbf000 - 00000000bfd82000 (usable) [ 0.000000] BIOS-e820: 00000000bfd82000 - 00000000bfdbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfdec000 (usable) [ 0.000000] BIOS-e820: 00000000bfdec000 - 00000000bfdff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable) [ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFFA0000 mask FFFFC0000 write-protect [ 0.000000] 1 base 0FFFE0000 mask FFFFE0000 write-protect [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 base 0BFE00000 mask FFFE00000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfc69000 (usable) [ 0.000000] modified: 00000000bfc69000 - 00000000bfcbf000 (reserved) [ 0.000000] modified: 00000000bfcbf000 - 00000000bfd82000 (usable) [ 0.000000] modified: 00000000bfd82000 - 00000000bfdbf000 (ACPI NVS) [ 0.000000] modified: 00000000bfdbf000 - 00000000bfdec000 (usable) [ 0.000000] modified: 00000000bfdec000 - 00000000bfdff000 (ACPI data) [ 0.000000] modified: 00000000bfdff000 - 00000000bfe00000 (usable) [ 0.000000] modified: 00000000bfe00000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000 [ 0.000000] RAMDISK: 37862000 - 37fef6a2 [ 0.000000] Allocated new RAMDISK: 0093f000 - 010cc6a2 [ 0.000000] Move RAMDISK from 0000000037862000 - 0000000037fef6a1 to 0093f000 - 010cc6a1 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT bfdfe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP bfdfd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: DSDT bfdef000 0913C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: FACS bfd8f000 00040 [ 0.000000] ACPI: HPET bfdfc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: APIC bfdfb000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: MCFG bfdfa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: ASF! bfdf9000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SLIC bfdee000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: BOOT bfded000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SSDT bfdec000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4230MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00009000 - 0000ff40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00009367f8] TEXT DATA BSS ==> [0000100000 - 00009367f8] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [0000937000 - 000093e22c] BRK ==> [0000937000 - 000093e22c] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [000093f000 - 00010cc6a2] NEW RAMDISK ==> [000093f000 - 00010cc6a2] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bfc69 [ 0.000000] 0: 0x000bfcbf -> 0x000bfd82 [ 0.000000] 0: 0x000bfdbf -> 0x000bfdec [ 0.000000] 0: 0x000bfdff -> 0x000bfe00 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1047796 [ 0.000000] free_area_init_node: node 0, pgdat c07d8d80, node_mem_map c10ce000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3962 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8461 pages used for memmap [ 0.000000] HighMem zone: 811599 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c3a00000 s39480 r0 d21960 u524288 [ 0.000000] pcpu-alloc: s39480 r0 d21960 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037555 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic-pae root=UUID=38402628-6511-4abe-a24c-ba3abcc44789 ro splash quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 26214400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:00140000) [ 0.000000] Memory: 4106116k/5242880k available (4832k kernel code, 83876k reserved, 2221k data, 676k init, 3280240k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07e4000 - 0xc088d000 ( 676 kB) [ 0.000000] .data : 0xc05b82fb - 0xc07e3828 (2221 kB) [ 0.000000] .text : 0xc0100000 - 0xc05b82fb (4832 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2261.040 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.08 BogoMIPS (lpj=9044160) [ 0.004020] Security Framework initialized [ 0.004038] AppArmor: AppArmor initialized [ 0.004043] Mount-cache hash table entries: 512 [ 0.004156] Initializing cgroup subsys ns [ 0.004160] Initializing cgroup subsys cpuacct [ 0.004164] Initializing cgroup subsys memory [ 0.004170] Initializing cgroup subsys devices [ 0.004171] Initializing cgroup subsys freezer [ 0.004173] Initializing cgroup subsys net_cls [ 0.004192] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004194] CPU: L2 cache: 3072K [ 0.004197] CPU: Physical Processor ID: 0 [ 0.004198] CPU: Processor Core ID: 0 [ 0.004202] mce: CPU supports 6 MCE banks [ 0.004210] CPU0: Thermal monitoring enabled (TM1) [ 0.004213] using mwait in idle threads. [ 0.004219] Performance Events: Core2 events, Intel PMU driver. [ 0.004224] ... version: 2 [ 0.004226] ... bit width: 40 [ 0.004227] ... generic registers: 2 [ 0.004229] ... value mask: 000000ffffffffff [ 0.004231] ... max period: 000000007fffffff [ 0.004233] ... fixed-purpose events: 3 [ 0.004234] ... event mask: 0000000700000003 [ 0.004238] Checking 'hlt' instruction... OK. [ 0.022691] ACPI: Core revision 20090903 [ 0.040008] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040012] ftrace: allocating 22411 entries in 44 pages [ 0.044047] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084923] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06 [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 3072K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.172068] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06 [ 0.172077] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.176016] Brought up 2 CPUs [ 0.176019] Total of 2 processors activated (9044.05 BogoMIPS). [ 0.176630] CPU0 attaching sched-domain: [ 0.176633] domain 0: span 0-1 level MC [ 0.176636] groups: 0 1 [ 0.176641] CPU1 attaching sched-domain: [ 0.176643] domain 0: span 0-1 level MC [ 0.176645] groups: 1 0 [ 0.176731] devtmpfs: initialized [ 0.176731] regulator: core version 0.5 [ 0.176731] Time: 11:26:33 Date: 09/02/10 [ 0.176731] NET: Registered protocol family 16 [ 0.176731] Trying to unpack rootfs image as initramfs... [ 0.176731] EISA bus registered [ 0.176731] ACPI: bus type pci registered [ 0.176731] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.176731] PCI: MCFG area at f8000000 reserved in E820 [ 0.176731] PCI: Using MMCONFIG for extended config space [ 0.176731] PCI: Using configuration type 1 for base access [ 0.180087] bio: create slab at 0 [ 0.181454] ACPI: EC: Look up EC in DSDT [ 0.183655] ACPI: Executed 1 blocks of module-level executable AML code [ 0.196030] ACPI: BIOS _OSI(Linux) query ignored [ 0.212147] ACPI: Interpreter enabled [ 0.212155] ACPI: (supports S0 S3 S4 S5) [ 0.212184] ACPI: Using IOAPIC for interrupt routing [ 0.213437] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.218591] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.218678] ACPI: Power Resource [FN00] (off) [ 0.218951] ACPI: No dock devices found. [ 0.219437] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.219542] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.219545] pci 0000:00:01.0: PME# disabled [ 0.219654] pci 0000:00:1a.0: reg 20 io port: [0x70e0-0x70ff] [ 0.219772] pci 0000:00:1a.1: reg 20 io port: [0x70c0-0x70df] [ 0.219884] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdb305c00-0xdb305fff] [ 0.219958] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.219963] pci 0000:00:1a.7: PME# disabled [ 0.220030] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdb300000-0xdb303fff] [ 0.220084] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.220088] pci 0000:00:1b.0: PME# disabled [ 0.220169] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.220173] pci 0000:00:1c.0: PME# disabled [ 0.220257] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.220261] pci 0000:00:1c.1: PME# disabled [ 0.220344] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.220348] pci 0000:00:1c.3: PME# disabled [ 0.220431] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.220435] pci 0000:00:1c.4: PME# disabled [ 0.220523] pci 0000:00:1d.0: reg 20 io port: [0x70a0-0x70bf] [ 0.220640] pci 0000:00:1d.1: reg 20 io port: [0x7080-0x709f] [ 0.220755] pci 0000:00:1d.2: reg 20 io port: [0x7060-0x707f] [ 0.220873] pci 0000:00:1d.3: reg 20 io port: [0x7040-0x705f] [ 0.220976] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdb305800-0xdb305bff] [ 0.221050] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.221055] pci 0000:00:1d.7: PME# disabled [ 0.221276] pci 0000:00:1f.2: reg 10 io port: [0x7108-0x710f] [ 0.221284] pci 0000:00:1f.2: reg 14 io port: [0x7114-0x7117] [ 0.221291] pci 0000:00:1f.2: reg 18 io port: [0x7100-0x7107] [ 0.221298] pci 0000:00:1f.2: reg 1c io port: [0x7110-0x7113] [ 0.221305] pci 0000:00:1f.2: reg 20 io port: [0x7020-0x703f] [ 0.221312] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdb305000-0xdb3057ff] [ 0.221353] pci 0000:00:1f.2: PME# supported from D3hot [ 0.221357] pci 0000:00:1f.2: PME# disabled [ 0.221393] pci 0000:00:1f.3: reg 10 64bit mmio: [0xdb306000-0xdb3060ff] [ 0.221410] pci 0000:00:1f.3: reg 20 io port: [0x7000-0x701f] [ 0.221474] pci 0000:00:1f.6: reg 10 64bit mmio: [0xdb304000-0xdb304fff] [ 0.221666] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff] [ 0.221706] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.221739] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff] [ 0.221766] pci 0000:01:00.0: reg 24 io port: [0x6000-0x607f] [ 0.221793] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfff80000-0xffffffff] [ 0.221996] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff] [ 0.221999] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff] [ 0.222004] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.222074] pci 0000:02:00.0: reg 10 64bit mmio: [0xda200000-0xda23ffff] [ 0.222083] pci 0000:02:00.0: reg 18 io port: [0x4000-0x407f] [ 0.222166] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.222172] pci 0000:02:00.0: PME# disabled [ 0.222244] pci 0000:00:1c.0: bridge io port: [0x4000-0x5fff] [ 0.222249] pci 0000:00:1c.0: bridge 32bit mmio: [0xda200000-0xdb2fffff] [ 0.222256] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd3000000-0xd3ffffff] [ 0.222310] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.222315] pci 0000:00:1c.1: bridge 32bit mmio: [0xd9200000-0xda1fffff] [ 0.222321] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd4000000-0xd4ffffff] [ 0.222444] pci 0000:05:00.0: reg 10 64bit mmio: [0xd8100000-0xd8101fff] [ 0.222562] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.222573] pci 0000:05:00.0: PME# disabled [ 0.222659] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] [ 0.222663] pci 0000:00:1c.3: bridge 32bit mmio: [0xd8100000-0xd91fffff] [ 0.222671] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xd5000000-0xd5ffffff] [ 0.222725] pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff] [ 0.222730] pci 0000:00:1c.4: bridge 32bit mmio: [0xd7000000-0xd80fffff] [ 0.222737] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd6000000-0xd6ffffff] [ 0.222796] pci 0000:00:1e.0: transparent bridge [ 0.222836] pci_bus 0000:00: on NUMA node 0 [ 0.222843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.223080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.223187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.223316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.223408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.223503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.223595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.237277] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.237408] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.237537] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.237665] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.237794] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.237923] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 0.238050] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 0.238179] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.238315] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.238319] vgaarb: loaded [ 0.238426] SCSI subsystem initialized [ 0.238511] libata version 3.00 loaded. [ 0.238574] usbcore: registered new interface driver usbfs [ 0.238585] usbcore: registered new interface driver hub [ 0.238610] usbcore: registered new device driver usb [ 0.238816] ACPI: WMI: Mapper loaded [ 0.238818] PCI: Using ACPI for IRQ routing [ 0.239053] NetLabel: Initializing [ 0.239054] NetLabel: domain hash size = 128 [ 0.239056] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.239067] NetLabel: unlabeled traffic allowed by default [ 0.239096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.239101] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.244124] Switching to clocksource tsc [ 0.245889] AppArmor: AppArmor Filesystem Enabled [ 0.245900] pnp: PnP ACPI init [ 0.245910] ACPI: bus type pnp registered [ 0.247043] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.4 BAR 13 (0x1000-0x1fff), disabling [ 0.247895] pnp: PnP ACPI: found 10 devices [ 0.247897] ACPI: ACPI bus type pnp unregistered [ 0.247900] PnPBIOS: Disabled by ACPI PNP [ 0.247912] system 00:01: ioport range 0x600-0x60f has been reserved [ 0.247914] system 00:01: ioport range 0x610-0x610 has been reserved [ 0.247917] system 00:01: ioport range 0x800-0x80f has been reserved [ 0.247919] system 00:01: ioport range 0x810-0x817 has been reserved [ 0.247922] system 00:01: ioport range 0x820-0x823 has been reserved [ 0.247924] system 00:01: ioport range 0x400-0x47f has been reserved [ 0.247927] system 00:01: ioport range 0x500-0x53f has been reserved [ 0.247931] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.247933] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.247936] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.247939] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.247942] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.247945] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.247948] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.247950] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.247953] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.247956] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.282623] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff] [ 0.282684] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff] [ 0.282688] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.282690] pci 0000:00:01.0: IO window: 0x6000-0x6fff [ 0.282694] pci 0000:00:01.0: MEM window: 0xd0000000-0xd2ffffff [ 0.282697] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.282702] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.282705] pci 0000:00:1c.0: IO window: 0x4000-0x5fff [ 0.282710] pci 0000:00:1c.0: MEM window: 0xda200000-0xdb2fffff [ 0.282715] pci 0000:00:1c.0: PREFETCH window: 0x000000d3000000-0x000000d3ffffff [ 0.282722] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.282725] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.282730] pci 0000:00:1c.1: MEM window: 0xd9200000-0xda1fffff [ 0.282735] pci 0000:00:1c.1: PREFETCH window: 0x000000d4000000-0x000000d4ffffff [ 0.282743] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.282746] pci 0000:00:1c.3: IO window: 0x2000-0x2fff [ 0.282752] pci 0000:00:1c.3: MEM window: 0xd8100000-0xd91fffff [ 0.282756] pci 0000:00:1c.3: PREFETCH window: 0x000000d5000000-0x000000d5ffffff [ 0.282764] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 [ 0.282767] pci 0000:00:1c.4: IO window: 0x1000-0x1fff [ 0.282772] pci 0000:00:1c.4: MEM window: 0xd7000000-0xd80fffff [ 0.282776] pci 0000:00:1c.4: PREFETCH window: 0x000000d6000000-0x000000d6ffffff [ 0.282784] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 0.282785] pci 0000:00:1e.0: IO window: disabled [ 0.282791] pci 0000:00:1e.0: MEM window: disabled [ 0.282795] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.282815] alloc irq_desc for 16 on node -1 [ 0.282817] alloc kstat_irqs on node -1 [ 0.282824] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.282828] pci 0000:00:01.0: setting latency timer to 64 [ 0.282837] alloc irq_desc for 17 on node -1 [ 0.282838] alloc kstat_irqs on node -1 [ 0.282842] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.282846] pci 0000:00:1c.0: setting latency timer to 64 [ 0.282856] pci 0000:00:1c.1: enabling device (0000 -> 0003) [ 0.282859] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.282865] pci 0000:00:1c.1: setting latency timer to 64 [ 0.282874] alloc irq_desc for 19 on node -1 [ 0.282875] alloc kstat_irqs on node -1 [ 0.282879] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.282883] pci 0000:00:1c.3: setting latency timer to 64 [ 0.282892] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.282896] pci 0000:00:1c.4: setting latency timer to 64 [ 0.282903] pci 0000:00:1e.0: setting latency timer to 64 [ 0.282907] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.282910] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.282912] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff] [ 0.282915] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff] [ 0.282917] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.282919] pci_bus 0000:02: resource 0 io: [0x4000-0x5fff] [ 0.282922] pci_bus 0000:02: resource 1 mem: [0xda200000-0xdb2fffff] [ 0.282924] pci_bus 0000:02: resource 2 pref mem [0xd3000000-0xd3ffffff] [ 0.282926] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] [ 0.282928] pci_bus 0000:03: resource 1 mem: [0xd9200000-0xda1fffff] [ 0.282931] pci_bus 0000:03: resource 2 pref mem [0xd4000000-0xd4ffffff] [ 0.282933] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff] [ 0.282935] pci_bus 0000:05: resource 1 mem: [0xd8100000-0xd91fffff] [ 0.282937] pci_bus 0000:05: resource 2 pref mem [0xd5000000-0xd5ffffff] [ 0.282940] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff] [ 0.282942] pci_bus 0000:06: resource 1 mem: [0xd7000000-0xd80fffff] [ 0.282944] pci_bus 0000:06: resource 2 pref mem [0xd6000000-0xd6ffffff] [ 0.282946] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.282949] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.282985] NET: Registered protocol family 2 [ 0.283083] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.283376] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.283825] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.284045] TCP: Hash tables configured (established 131072 bind 65536) [ 0.284047] TCP reno registered [ 0.284121] NET: Registered protocol family 1 [ 0.315554] pci 0000:01:00.0: Boot video device [ 0.315586] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.315588] Simple Boot Flag at 0x44 set to 0x1 [ 0.315735] cpufreq-nforce2: No nForce2 chipset. [ 0.315759] Scanning for low memory corruption every 60 seconds [ 0.315857] audit: initializing netlink socket (disabled) [ 0.315869] type=2000 audit(1283426793.315:1): initialized [ 0.325141] highmem bounce pool size: 64 pages [ 0.325146] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.326434] VFS: Disk quotas dquot_6.5.2 [ 0.326486] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.326985] fuse init (API version 7.13) [ 0.327061] msgmni has been set to 1615 [ 0.327245] alg: No test for stdrng (krng) [ 0.327293] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.327296] io scheduler noop registered [ 0.327297] io scheduler anticipatory registered [ 0.327299] io scheduler deadline registered [ 0.327335] io scheduler cfq registered (default) [ 0.327474] alloc irq_desc for 24 on node -1 [ 0.327476] alloc kstat_irqs on node -1 [ 0.327484] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.327490] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.327613] alloc irq_desc for 25 on node -1 [ 0.327614] alloc kstat_irqs on node -1 [ 0.327622] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.327633] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.327778] alloc irq_desc for 26 on node -1 [ 0.327780] alloc kstat_irqs on node -1 [ 0.327788] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.327798] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.327946] alloc irq_desc for 27 on node -1 [ 0.327948] alloc kstat_irqs on node -1 [ 0.327958] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.327968] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.328112] alloc irq_desc for 28 on node -1 [ 0.328114] alloc kstat_irqs on node -1 [ 0.328122] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X [ 0.328133] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.328228] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.328442] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.328594] ACPI: AC Adapter [ADP0] (on-line) [ 0.328666] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.328669] ACPI: Sleep Button [SLPB] [ 0.328705] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.328708] ACPI: Power Button [PWRB] [ 0.328747] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.328808] ACPI: Lid Switch [LID0] [ 0.328865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.328868] ACPI: Power Button [PWRF] [ 0.329010] fan PNP0C0B:00: registered as cooling_device0 [ 0.329015] ACPI: Fan [FAN0] (off) [ 0.329863] ACPI: SSDT bfc77c18 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.330455] ACPI: SSDT bfc75598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.330956] Monitor-Mwait will be used to enter C-1 state [ 0.330980] Monitor-Mwait will be used to enter C-2 state [ 0.331000] Monitor-Mwait will be used to enter C-3 state [ 0.331006] Marking TSC unstable due to TSC halts in idle [ 0.331061] processor LNXCPU:00: registered as cooling_device1 [ 0.331526] ACPI: SSDT bfc76e18 001CF (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.332003] ACPI: SSDT bfc77f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.332412] Switching to clocksource hpet [ 0.336020] processor LNXCPU:01: registered as cooling_device2 [ 0.339079] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.339086] ACPI: Thermal Zone [TZ00] (38 C) [ 0.339265] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.339271] ACPI: Thermal Zone [TZVR] (40 C) [ 0.339448] thermal LNXTHERM:03: registered as thermal_zone2 [ 0.339455] ACPI: Thermal Zone [TZVL] (41 C) [ 0.339632] thermal LNXTHERM:04: registered as thermal_zone3 [ 0.339638] ACPI: Thermal Zone [TZ01] (39 C) [ 0.341043] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.342247] brd: module loaded [ 0.342666] loop: module loaded [ 0.342743] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.343124] Fixed MDIO Bus: probed [ 0.343154] PPP generic driver version 2.4.2 [ 0.343183] tun: Universal TUN/TAP device driver, 1.6 [ 0.343185] tun: (C) 1999-2004 Max Krasnyansky [ 0.343261] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.343284] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.343296] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.343299] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.343327] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.343354] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.347237] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.347255] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdb305c00 [ 0.351184] isapnp: Scanning for PnP cards... [ 0.352621] Freeing initrd memory: 7733k freed [ 0.360608] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.360750] usb usb1: configuration #1 chosen from 1 choice [ 0.360777] hub 1-0:1.0: USB hub found [ 0.360788] hub 1-0:1.0: 4 ports detected [ 0.360855] alloc irq_desc for 23 on node -1 [ 0.360856] alloc kstat_irqs on node -1 [ 0.360863] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.360884] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.360888] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.360921] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.360948] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.364851] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.364868] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdb305800 [ 0.380512] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.380588] usb usb2: configuration #1 chosen from 1 choice [ 0.380611] hub 2-0:1.0: USB hub found [ 0.380617] hub 2-0:1.0: 8 ports detected [ 0.380679] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.380700] uhci_hcd: USB Universal Host Controller Interface driver [ 0.380737] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.380745] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.380748] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.380784] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.380816] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070e0 [ 0.380893] usb usb3: configuration #1 chosen from 1 choice [ 0.380915] hub 3-0:1.0: USB hub found [ 0.380921] hub 3-0:1.0: 2 ports detected [ 0.380966] alloc irq_desc for 21 on node -1 [ 0.380967] alloc kstat_irqs on node -1 [ 0.380971] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.380977] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.380980] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.381006] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.381037] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000070c0 [ 0.381112] usb usb4: configuration #1 chosen from 1 choice [ 0.381134] hub 4-0:1.0: USB hub found [ 0.381140] hub 4-0:1.0: 2 ports detected [ 0.381186] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.381192] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.381195] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.381221] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.381245] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000070a0 [ 0.381320] usb usb5: configuration #1 chosen from 1 choice [ 0.381344] hub 5-0:1.0: USB hub found [ 0.381350] hub 5-0:1.0: 2 ports detected [ 0.381389] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.381395] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.381398] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.381425] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.381451] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007080 [ 0.381532] usb usb6: configuration #1 chosen from 1 choice [ 0.381556] hub 6-0:1.0: USB hub found [ 0.381561] hub 6-0:1.0: 2 ports detected [ 0.381601] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.381607] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.381610] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.381636] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.381661] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00007060 [ 0.381745] usb usb7: configuration #1 chosen from 1 choice [ 0.381767] hub 7-0:1.0: USB hub found [ 0.381773] hub 7-0:1.0: 2 ports detected [ 0.381812] alloc irq_desc for 18 on node -1 [ 0.381814] alloc kstat_irqs on node -1 [ 0.381818] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.381823] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.381827] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.381852] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 0.381885] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00007040 [ 0.381965] usb usb8: configuration #1 chosen from 1 choice [ 0.381986] hub 8-0:1.0: USB hub found [ 0.381992] hub 8-0:1.0: 2 ports detected [ 0.382076] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 0.385182] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.387034] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.387039] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.387042] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.387045] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.387047] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.387113] mice: PS/2 mouse device common for all mice [ 0.387233] rtc_cmos 00:03: RTC can wake from S4 [ 0.387273] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.387302] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.387387] device-mapper: uevent: version 1.0.3 [ 0.387489] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.387543] device-mapper: multipath: version 1.1.0 loaded [ 0.387546] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.387640] EISA: Probing bus 0 at eisa.0 [ 0.387646] Cannot allocate resource for EISA slot 1 [ 0.387648] Cannot allocate resource for EISA slot 2 [ 0.387649] Cannot allocate resource for EISA slot 3 [ 0.387651] Cannot allocate resource for EISA slot 4 [ 0.387653] Cannot allocate resource for EISA slot 5 [ 0.387654] Cannot allocate resource for EISA slot 6 [ 0.387656] Cannot allocate resource for EISA slot 7 [ 0.387661] EISA: Detected 0 cards. [ 0.387785] cpuidle: using governor ladder [ 0.387886] cpuidle: using governor menu [ 0.388293] TCP cubic registered [ 0.388426] NET: Registered protocol family 10 [ 0.388862] lo: Disabled Privacy Extensions [ 0.389163] NET: Registered protocol family 17 [ 0.389584] Using IPI No-Shortcut mode [ 0.389645] PM: Resume from disk failed. [ 0.389660] registered taskstats version 1 [ 0.390238] Magic number: 10:706:427 [ 0.390320] rtc_cmos 00:03: setting system clock to 2010-09-02 11:26:34 UTC (1283426794) [ 0.390322] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.390324] EDD information not available. [ 0.397122] ACPI: Battery Slot [BAT0] (battery present) [ 0.426302] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.706950] isapnp: No Plug & Play device found [ 0.706963] Freeing unused kernel memory: 676k freed [ 0.707324] Write protecting the kernel text: 4836k [ 0.707425] Write protecting the kernel read-only data: 1880k [ 0.722005] udev: starting version 151 [ 0.784796] ATL1E 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.784809] ATL1E 0000:02:00.0: setting latency timer to 64 [ 0.806360] ahci 0000:00:1f.2: version 3.0 [ 0.806382] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.806428] alloc irq_desc for 29 on node -1 [ 0.806430] alloc kstat_irqs on node -1 [ 0.806442] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 0.806535] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.806538] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs [ 0.806544] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.841236] scsi0 : ahci [ 0.842261] scsi1 : ahci [ 0.842321] scsi2 : ahci [ 0.842373] scsi3 : ahci [ 0.842426] scsi4 : ahci [ 0.842476] scsi5 : ahci [ 0.842649] ata1: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305100 irq 29 [ 0.842653] ata2: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305180 irq 29 [ 0.842655] ata3: DUMMY [ 0.842656] ata4: DUMMY [ 0.842659] ata5: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305300 irq 29 [ 0.842662] ata6: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305380 irq 29 [ 0.848085] usb 2-6: new high speed USB device using ehci_hcd and address 2 [ 1.055171] usb 2-6: configuration #1 chosen from 1 choice [ 1.160114] ata6: SATA link down (SStatus 0 SControl 300) [ 1.160137] ata5: SATA link down (SStatus 0 SControl 300) [ 1.296063] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 1.324072] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.324092] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.326283] ata2.00: ATAPI: Slimtype BD E DS4E1S, EA12, max UDMA/100 [ 1.327675] ata2.00: configured for UDMA/100 [ 1.361567] ata1.00: ATA-8: WDC WD3200BEKT-22F3T0, 11.01A11, max UDMA/133 [ 1.361571] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.364424] ata1.00: configured for UDMA/133 [ 1.380232] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-2 11.0 PQ: 0 ANSI: 5 [ 1.380370] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.380451] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.380490] sd 0:0:0:0: [sda] Write Protect is off [ 1.380493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.380517] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.380635] sda: [ 1.383497] scsi 1:0:0:0: CD-ROM Slimtype BD E DS4E1S EA12 PQ: 0 ANSI: 5 [ 1.388671] sda1 sda2 sda3 sda4 [ 1.451854] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.455170] usb 4-2: configuration #1 chosen from 1 choice [ 2.084096] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 3.241369] udev: starting version 151 [ 4.129214] Linux video capture interface: v2.00 [ 4.182906] uvcvideo: Found UVC 1.00 device Acer HD Crystal Eye webcam (064e:a117) [ 4.191262] input: Acer HD Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input6 [ 4.191367] usbcore: registered new interface driver uvcvideo [ 4.191537] USB Video Class driver (v0.1.0) [ 4.204201] Linux agpgart interface v0.103 [ 4.209866] acer-wmi: Acer Laptop ACPI-WMI Extras [ 4.210198] acer-wmi: Brightness must be controlled by generic video driver [ 4.287992] type=1505 audit(1283419598.393:2): operation="profile_load" pid=521 name="/sbin/dhclient3" [ 4.288060] type=1505 audit(1283419598.397:3): operation="profile_load" pid=521 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 4.288100] type=1505 audit(1283419598.397:4): operation="profile_load" pid=521 name="/usr/lib/connman/scripts/dhclient-script" [ 4.289116] cfg80211: Calling CRDA to update world regulatory domain [ 4.289213] [Firmware Bug]: ACPI(EVGA) defines _DOD but not _DOS [ 4.289732] ACPI Warning: _BQC returned an invalid level (20090903/video-631) [ 4.328911] [drm] Initialized drm 1.1.0 20060810 [ 4.340194] acpi device:02: registered as cooling_device3 [ 4.340304] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7 [ 4.340351] ACPI: Video Device [EVGA] (multi-head: yes rom: no post: no) [ 4.340377] [Firmware Bug]: ACPI(NVGA) defines _DOD but not _DOS [ 4.340545] ACPI Warning: _BQC returned an invalid level (20090903/video-631) [ 4.386955] lp: driver loaded but no devices found [ 4.388204] acpi device:05: registered as cooling_device4 [ 4.388282] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:01/input/input8 [ 4.388330] ACPI: Video Device [NVGA] (multi-head: yes rom: no post: no) [ 4.482043] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 4.482046] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 4.482209] iwlagn 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.482245] iwlagn 0000:05:00.0: setting latency timer to 64 [ 4.482338] iwlagn 0000:05:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 4.522027] iwlagn 0000:05:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 4.522090] alloc irq_desc for 30 on node -1 [ 4.522092] alloc kstat_irqs on node -1 [ 4.522111] iwlagn 0000:05:00.0: irq 30 for MSI/MSI-X [ 4.536566] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.536586] nouveau 0000:01:00.0: setting latency timer to 64 [ 4.537742] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [ 4.538372] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096480a1) [ 4.539893] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 4.610518] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 4.641925] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 4.641930] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 4.641932] [drm] nouveau 0000:01:00.0: Bios version 62.94.38.00 [ 4.641935] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 4.641938] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 4.641941] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 4.641944] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [ 4.641946] [drm] nouveau 0000:01:00.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07 [ 4.641949] [drm] nouveau 0000:01:00.0: 2: 0x00002231: type 0x31 idx 2 tag 0x08 [ 4.641952] [drm] nouveau 0000:01:00.0: 3: 0x00110346: type 0x46 idx 3 tag 0x51 [ 4.641954] [drm] nouveau 0000:01:00.0: 4: 0x00000400: type 0x00 idx 4 tag 0xff [ 4.641957] [drm] nouveau 0000:01:00.0: 5: 0x00000510: type 0x10 idx 5 tag 0xff [ 4.641959] [drm] nouveau 0000:01:00.0: 6: 0x00000511: type 0x11 idx 5 tag 0xff [ 4.641961] [drm] nouveau 0000:01:00.0: 7: 0x00000513: type 0x13 idx 5 tag 0xff [ 4.641964] [drm] nouveau 0000:01:00.0: 8: 0x00002631: type 0x31 idx 6 tag 0x08 [ 4.641966] [drm] nouveau 0000:01:00.0: 9: 0x00001731: type 0x31 idx 7 tag 0x07 [ 4.641969] [drm] nouveau 0000:01:00.0: 10: 0x00002831: type 0x31 idx 8 tag 0x08 [ 4.641971] [drm] nouveau 0000:01:00.0: 11: 0x00110946: type 0x46 idx 9 tag 0x51 [ 4.641974] [drm] nouveau 0000:01:00.0: 12: 0x00000a00: type 0x00 idx 10 tag 0xff [ 4.641977] [drm] nouveau 0000:01:00.0: 13: 0x00000b10: type 0x10 idx 11 tag 0xff [ 4.641979] [drm] nouveau 0000:01:00.0: 14: 0x00000b11: type 0x11 idx 11 tag 0xff [ 4.641982] [drm] nouveau 0000:01:00.0: 15: 0x00000b13: type 0x13 idx 11 tag 0xff [ 4.641984] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034 [ 4.641987] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 04011312 00020010 [ 4.641989] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04033386 0f220020 [ 4.641991] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04033332 00020020 [ 4.641994] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 02044300 00000028 [ 4.642010] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD56C [ 4.692183] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD95D [ 4.708026] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE926 [ 4.708051] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEA6F [ 4.716210] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xECD7 [ 4.716213] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xED3C [ 4.740048] [drm] nouveau 0000:01:00.0: 0xED3C: Condition still not met after 20ms, skipping following opcodes [ 4.740068] [drm] nouveau 0000:01:00.0: 0xB9BA: parsing output script 0 [ 4.740072] [drm] nouveau 0000:01:00.0: 0xBD92: parsing output script 0 [ 4.740099] [drm] nouveau 0000:01:00.0: 0xBFA0: parsing output script 0 [ 4.740102] [drm] nouveau 0000:01:00.0: 0xBD92: parsing output script 0 [ 4.888592] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 4.897347] [TTM] Zone kernel: Available graphics memory: 417738 kiB. [ 4.897349] [TTM] Zone highmem: Available graphics memory: 2057858 kiB. [ 4.897364] [drm] nouveau 0000:01:00.0: 512 MiB VRAM [ 4.922306] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 4.926036] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 4.931969] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 4.932855] [drm] nouveau 0000:01:00.0: Detected a LVDS output [ 4.932867] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 4.932869] [drm] nouveau 0000:01:00.0: Detected a DP output [ 4.932871] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 4.932874] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 4.932878] [drm] nouveau 0000:01:00.0: Detected a LVDS connector [ 5.005778] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04711/0xa04000 [ 5.042734] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9 [ 5.046031] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [ 5.046184] [drm] nouveau 0000:01:00.0: Detected a DisplayPort connector [ 5.046313] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 5.064633] usb 7-1: configuration #1 chosen from 1 choice [ 6.148399] Bluetooth: Core ver 2.15 [ 6.148448] NET: Registered protocol family 31 [ 6.148450] Bluetooth: HCI device and connection manager initialized [ 6.148452] Bluetooth: HCI socket layer initialized [ 6.190186] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 6.190289] usbcore: registered new interface driver btusb [ 6.207359] alloc irq_desc for 22 on node -1 [ 6.207362] alloc kstat_irqs on node -1 [ 6.207374] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.207410] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.253568] [drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x40250000, bo e6adb000 [ 6.253693] fb0: nouveaufb frame buffer device [ 6.253695] registered panic notifier [ 6.253701] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 6.653566] vga16fb: initializing [ 6.653570] vga16fb: mapped to 0xc00a0000 [ 6.653573] vga16fb: not registering due to another framebuffer present [ 6.750407] [drm] nouveau 0000:01:00.0: 0xB9BE: parsing output script 1 [ 6.750466] Console: switching to colour frame buffer device 170x48 [ 6.750481] [drm] nouveau 0000:01:00.0: 0xB851: parsing clock script 0 [ 6.895649] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 7.006833] [drm] nouveau 0000:01:00.0: 0xB9B5: parsing clock script 1 [ 7.525500] kjournald starting. Commit interval 5 seconds [ 7.525757] EXT3 FS on sda7, internal journal [ 7.525762] EXT3-fs: mounted filesystem with ordered data mode. [ 7.667449] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 9.732589] type=1505 audit(1283419603.842:5): operation="profile_replace" pid=1050 name="/sbin/dhclient3" [ 9.732675] type=1505 audit(1283419603.842:6): operation="profile_replace" pid=1050 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.732733] type=1505 audit(1283419603.842:7): operation="profile_replace" pid=1050 name="/usr/lib/connman/scripts/dhclient-script" [ 10.913414] alloc irq_desc for 31 on node -1 [ 10.913418] alloc kstat_irqs on node -1 [ 10.913435] ATL1E 0000:02:00.0: irq 31 for MSI/MSI-X [ 10.913565] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 10.913736] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.913896] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.916227] iwlagn 0000:05:00.0: firmware: requesting iwlwifi-5000-2.ucode [ 11.106769] iwlagn 0000:05:00.0: loaded firmware version 8.24.2.12 [ 11.245954] Registered led device: iwl-phy0::radio [ 11.245971] Registered led device: iwl-phy0::assoc [ 11.245986] Registered led device: iwl-phy0::RX [ 11.246001] Registered led device: iwl-phy0::TX [ 11.256506] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.588548] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 12.594410] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 13.511672] type=1505 audit(1283419607.618:8): operation="profile_load" pid=1052 name="/usr/bin/evince" [ 13.512526] type=1505 audit(1283419607.622:9): operation="profile_load" pid=1052 name="/usr/bin/evince-previewer" [ 13.513242] type=1505 audit(1283419607.622:10): operation="profile_load" pid=1052 name="/usr/bin/evince-thumbnailer" [ 13.778992] type=1505 audit(1283419607.885:11): operation="profile_load" pid=1173 name="/usr/lib/cups/backend/cups-pdf" [ 13.779175] type=1505 audit(1283419607.885:12): operation="profile_load" pid=1173 name="/usr/sbin/cupsd" [ 14.085494] type=1505 audit(1283419608.193:13): operation="profile_load" pid=1182 name="/usr/sbin/tcpdump" [ 15.556875] Bluetooth: L2CAP ver 2.14 [ 15.556877] Bluetooth: L2CAP socket layer initialized [ 15.670525] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.670528] Bluetooth: BNEP filters: protocol multicast [ 15.750176] Bridge firewalling registered [ 15.776328] Bluetooth: SCO (Voice Link) ver 0.6 [ 15.776331] Bluetooth: SCO socket layer initialized [ 15.803281] ppdev: user-space parallel port driver [ 15.946329] Bluetooth: RFCOMM TTY layer initialized [ 15.946333] Bluetooth: RFCOMM socket layer initialized [ 15.946335] Bluetooth: RFCOMM ver 1.11 [ 17.122094] CPU0 attaching NULL sched-domain. [ 17.122099] CPU1 attaching NULL sched-domain. [ 17.148092] CPU0 attaching sched-domain: [ 17.148097] domain 0: span 0-1 level MC [ 17.148100] groups: 0 1 [ 17.148106] CPU1 attaching sched-domain: [ 17.148109] domain 0: span 0-1 level MC [ 17.148112] groups: 1 0 [ 19.534941] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 21.468247] eth0: no IPv6 routers present [ 74.068629] CE: hpet increasing min_delta_ns to 15000 nsec [ 74.068745] CE: hpet increasing min_delta_ns to 22500 nsec [ 106.132625] CE: hpet increasing min_delta_ns to 33750 nsec [ 112.968625] CE: hpet increasing min_delta_ns to 50624 nsec [ 261.384937] padlock: VIA PadLock not detected. [ 266.027327] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended [ 1515.085121] ATL1E 0000:02:00.0: irq 31 for MSI/MSI-X [ 1515.085284] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 1515.085821] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1515.086278] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1525.476648] eth0: no IPv6 routers present [ 2339.513278] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2 [ 2340.192719] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 2340.206793] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 4066.196496] wlan0: deauthenticating from 00:3a:98:34:cf:93 by local choice (reason=3) [ 4066.198100] wlan0: direct probe to AP 00:3a:98:45:42:43 (try 1) [ 4066.244066] wlan0: direct probe responded [ 4066.244072] wlan0: authenticate with AP 00:3a:98:45:42:43 (try 1) [ 4066.249827] wlan0: authenticated [ 4066.249848] wlan0: associate with AP 00:3a:98:45:42:43 (try 1) [ 4066.255143] wlan0: RX AssocResp from 00:3a:98:45:42:43 (capab=0x421 status=0 aid=3) [ 4066.255146] wlan0: associated [ 4066.264076] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4066.264183] cfg80211: Calling CRDA for country: ES [ 4066.296371] cfg80211: Received country IE: [ 4066.296375] cfg80211: Regulatory domain: ES [ 4066.296377] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4066.296381] (2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 4066.296384] cfg80211: CRDA thinks this should applied: [ 4066.296386] cfg80211: Regulatory domain: ES [ 4066.296387] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4066.296391] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4066.296394] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4066.296397] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4066.296400] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 4066.296402] cfg80211: We intersect both of these and get: [ 4066.296404] cfg80211: Regulatory domain: 98 [ 4066.296406] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4066.296409] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4066.296414] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296417] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296420] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296423] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296426] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296429] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296432] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296435] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296437] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296440] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296443] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296446] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296449] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296452] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296455] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296457] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296460] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296463] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296466] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296469] cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296472] cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296475] cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296478] cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296481] cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE [ 4066.296488] cfg80211: Current regulatory domain updated by AP to: ES [ 4066.296490] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4066.296493] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4076.268122] wlan0: no IPv6 routers present [ 4098.740618] wlan0: deauthenticating from 00:3a:98:45:42:43 by local choice (reason=3) [ 4098.783755] wlan0: deauthenticating from 00:3a:98:45:42:43 by local choice (reason=3) [ 4098.823577] wlan0: direct probe to AP 00:3a:98:45:42:43 (try 1) [ 4098.828718] wlan0: direct probe responded [ 4098.828726] wlan0: authenticate with AP 00:3a:98:45:42:43 (try 1) [ 4098.832499] wlan0: authenticated [ 4098.832535] wlan0: associate with AP 00:3a:98:45:42:43 (try 1) [ 4098.850070] wlan0: RX AssocResp from 00:3a:98:45:42:43 (capab=0x421 status=0 aid=3) [ 4098.850076] wlan0: associated [ 4118.088645] wlan0: deauthenticating from 00:3a:98:45:42:43 by local choice (reason=3) [ 4118.093395] wlan0: deauthenticating from 00:3a:98:45:42:43 by local choice (reason=3) [ 4118.095051] wlan0: direct probe to AP 00:3a:98:34:cf:93 (try 1) [ 4118.113179] wlan0: direct probe responded [ 4118.113189] wlan0: authenticate with AP 00:3a:98:34:cf:93 (try 1) [ 4118.120682] wlan0: authenticated [ 4118.120727] wlan0: associate with AP 00:3a:98:34:cf:93 (try 1) [ 4118.136560] wlan0: RX AssocResp from 00:3a:98:34:cf:93 (capab=0x421 status=0 aid=1) [ 4118.136564] wlan0: associated [ 4157.828633] wlan0: deauthenticating from 00:3a:98:34:cf:93 by local choice (reason=3) [ 4157.832510] wlan0: deauthenticating from 00:3a:98:34:cf:93 by local choice (reason=3) [ 4157.838584] wlan0: direct probe to AP 00:3a:98:45:42:43 (try 1) [ 4158.036275] wlan0: direct probe to AP 00:3a:98:45:42:43 (try 2) [ 4158.044252] wlan0: direct probe responded [ 4158.044261] wlan0: authenticate with AP 00:3a:98:45:42:43 (try 1) [ 4158.048214] wlan0: authenticated [ 4158.048261] wlan0: associate with AP 00:3a:98:45:42:43 (try 1) [ 4158.057343] wlan0: RX AssocResp from 00:3a:98:45:42:43 (capab=0x421 status=0 aid=3) [ 4158.057350] wlan0: associated [ 4173.098517] ATL1E 0000:02:00.0: irq 31 for MSI/MSI-X [ 4173.098633] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 4173.101745] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4173.101913] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4183.944040] eth0: no IPv6 routers present [ 4217.824096] wlan0: deauthenticating from 00:3a:98:45:42:43 by local choice (reason=3) [ 4217.828544] wlan0: deauthenticating from 00:3a:98:45:42:43 by local choice (reason=3) [ 4217.840221] wlan0: direct probe to AP 00:3a:98:34:cf:93 (try 1) [ 4217.849106] wlan0: direct probe responded [ 4217.849110] wlan0: authenticate with AP 00:3a:98:34:cf:93 (try 1) [ 4217.852523] wlan0: authenticated [ 4217.852627] wlan0: associate with AP 00:3a:98:34:cf:93 (try 1) [ 4217.869185] wlan0: RX AssocResp from 00:3a:98:34:cf:93 (capab=0x421 status=0 aid=1) [ 4217.869188] wlan0: associated