systemd 229-3ubuntu1 source package in Ubuntu
Changelog
systemd (229-3ubuntu1) xenial; urgency=medium * Merge with Debian unstable. Remaining Ubuntu changes: - Hack to support system-image read-only /etc, and modify files in /etc/writable/ instead. Upgrade fixes, keep until 16.04 LTS release: - systemd Conflicts/Replaces/Provides systemd-services. - Remove obsolete systemd-logind upstart job. - Clean up obsolete /etc/udev/rules.d/README. - systemd.postinst: Migrate mountall specific fstab options to standard util-linux "nofail" option. - systemctl: Don't forward telinit u to upstart. This works around upstart's Restart() always reexec'ing /sbin/init on Restart(), even if that changes to point to systemd during the upgrade. This avoids running systemd during a dist-upgrade. (LP: #1430479) - Provide shutdown fallback for upstart. (LP: #1370329) - Break lvm (<< 2.02.133-1ubuntu1) and remove our dummy /etc/init.d/lvm2 on upgrades, as it's shipped by lvm2 now. - Make udev break on mdadm << 3.3-2ubuntu3, as udev's init script dropped the "Provides: raid-mdadm". - Clean up /var/log/udev on upgrade (which is written under upstart, but not under systemd). (LP: #1537211) - Migrate existing s390x network configuration to new names. (LP: #1526808) - systemd.postinst: Bump Version comparison for migrating the UTC setting from /etc/default/rcS to /etc/adjtime, to run it for upgrades to 16.04. - VMWare BIOS reports implausibly high onboard numbers. This got fixed in upstream commit 6c1e69f9. Migrate names in ifupdown accordingly. (LP: #1550539) systemd (229-3) unstable; urgency=medium [ Martin Pitt ] * debian/tests/timedated: Add tests for "timedatectl set-local-rtc". * Be more tolerant in parsing /etc/adjtime. * debian/systemd.postinst: Don't fail package installation if systemctl daemon-reload trigger fails. This does not fix the root cause of the reload failures, but at least causes fewer packages to be in a broken state after upgrade, so that a reboot or apt-get -f install have a much higher chance in succeeding. (For bugs like LP #1502097 or LP #1447654) * debian/tests/networkd: Skip test_hogplug_dhcp_ip6 when running against upstream as well. * debian/tests/boot-and-services: Wait for units to stop with a "systemctl is-active" loop instead of static sleeps. * debian/tests/networkd: Skip DHCPv6 tests for downstream packages too. This is an actual regression in networkd-229, to be investigated. But this shouldn't hold up reverse dependencies. * Fix assertion in add_random(). (LP: #1554861) * debian/tests/boot-and-services: Don't assert on "Stopped Container c1" message in NspawnTests.test_service(), this is sometimes not present. Just check that the unit did not fail. * Add "adduser" dependency to systemd-coredump, to quiesce lintian. * Bump Standards-Version to 3.9.7 (no changes necessary). * Fix timespec parsing by correctly initializing microseconds. (Closes: #818698, LP: #1559038) * networkd: Add fallback if FIONREAD is not supported. (Closes: #818488) * Cherry-pick various fixes from upstream master. - Fixes logout when changing the current target. (Closes: #805442) [ Evgeny Vereshchagin ] * debian/tests/boot-and-services: Search systemd-coredump's output by SYSLOG_IDENTIFIER. * Add missing "Recommends: btrfs-tools" to systemd-container. * Add systemd-coredump postinst/prerm to start/stop systemd-coredump.socket without a reboot. (Closes: #816767) [ Felipe Sateler ] * Set the paths of loadkeys and setfont via configure arguments, not a patch -- Martin Pitt <email address hidden> Mon, 21 Mar 2016 15:28:34 +0100
Upload details
- Uploaded by:
- Martin Pitt
- Uploaded to:
- Xenial
- Original maintainer:
- Ubuntu Developers
- Architectures:
- linux-any
- Section:
- admin
- Urgency:
- Medium Urgency
See full publishing history Publishing
Series | Published | Component | Section |
---|
Downloads
File | Size | SHA-256 Checksum |
---|---|---|
systemd_229.orig.tar.gz | 4.1 MiB | b51b0a48d1beb388d95bd6a98d62be05490335d4bb388aefecdcb576e91e0741 |
systemd_229-3ubuntu1.debian.tar.xz | 132.7 KiB | 53e0e8a8f9a55b7801d59a42681b93ff0fdc6d3c8b07d87543e73bc7a999b2ec |
systemd_229-3ubuntu1.dsc | 4.1 KiB | dd46133294190677cf0ce27a64eb2a4fdb915848b34d21255598c0c6ccebf7d6 |
Available diffs
- diff from 229-2ubuntu1 to 229-3ubuntu1 (21.5 KiB)
Binary packages built by this source
- libnss-myhostname: nss module providing fallback resolution for the current hostname
This package contains a plugin for the Name Service Switch, providing host
name resolution for the locally configured system hostname as returned by
gethostname(2). It returns all locally configured public IP addresses or -- if
none are configured, the IPv4 address 127.0.1.1 (which is on the local
loopback) and the IPv6 address ::1 (which is the local host).
.
A lot of software relies on that the local host name is resolvable. This
package provides an alternative to the fragile and error-prone manual editing
of /etc/hosts.
.
Installing this package automatically adds myhostname to /etc/nsswitch.conf.
- libnss-myhostname-dbgsym: debug symbols for package libnss-myhostname
This package contains a plugin for the Name Service Switch, providing host
name resolution for the locally configured system hostname as returned by
gethostname(2). It returns all locally configured public IP addresses or -- if
none are configured, the IPv4 address 127.0.1.1 (which is on the local
loopback) and the IPv6 address ::1 (which is the local host).
.
A lot of software relies on that the local host name is resolvable. This
package provides an alternative to the fragile and error-prone manual editing
of /etc/hosts.
.
Installing this package automatically adds myhostname to /etc/nsswitch.conf.
- libnss-mymachines: nss module to resolve hostnames for local container instances
nss-mymachines is a plugin for the GNU Name Service Switch (NSS) functionality
of the GNU C Library (glibc) providing hostname resolution for local containers
that are registered with systemd-machined. service( 8). The container names are
resolved to IP addresses of the specific container, ordered by their scope.
.
Installing this package automatically adds mymachines to /etc/nsswitch.conf.
- libnss-mymachines-dbgsym: debug symbols for package libnss-mymachines
nss-mymachines is a plugin for the GNU Name Service Switch (NSS) functionality
of the GNU C Library (glibc) providing hostname resolution for local containers
that are registered with systemd-machined. service( 8). The container names are
resolved to IP addresses of the specific container, ordered by their scope.
.
Installing this package automatically adds mymachines to /etc/nsswitch.conf.
- libnss-resolve: nss module to resolve names via systemd-resolved
nss-resolve is a plugin for the GNU Name Service Switch (NSS) functionality
of the GNU C Library (glibc) providing DNS and LLMNR resolution to programs via
the systemd-resolved daemon (provided in the systemd package).
.
Installing this package automatically adds resolve to /etc/nsswitch.conf.
- libnss-resolve-dbgsym: debug symbols for package libnss-resolve
nss-resolve is a plugin for the GNU Name Service Switch (NSS) functionality
of the GNU C Library (glibc) providing DNS and LLMNR resolution to programs via
the systemd-resolved daemon (provided in the systemd package).
.
Installing this package automatically adds resolve to /etc/nsswitch.conf.
- libpam-systemd: system and service manager - PAM module
This package contains the PAM module which registers user sessions in
the systemd control group hierarchy for logind.
.
If in doubt, do install this package.
.
Packages that depend on logind functionality need to depend on libpam-systemd.
- libpam-systemd-dbgsym: debug symbols for package libpam-systemd
This package contains the PAM module which registers user sessions in
the systemd control group hierarchy for logind.
.
If in doubt, do install this package.
.
Packages that depend on logind functionality need to depend on libpam-systemd.
- libsystemd-dev: systemd utility library - development files
The libsystemd0 library provides interfaces to various systemd components.
.
This package contains the development files.
- libsystemd-dev-dbgsym: debug symbols for package libsystemd-dev
The libsystemd0 library provides interfaces to various systemd components.
.
This package contains the development files.
- libsystemd0: systemd utility library
The libsystemd0 library provides interfaces to various systemd components.
- libsystemd0-dbgsym: debug symbols for package libsystemd0
The libsystemd0 library provides interfaces to various systemd components.
- libudev-dev: libudev development files
This package contains the files needed for developing applications that
use libudev.
- libudev-dev-dbgsym: debug symbols for package libudev-dev
This package contains the files needed for developing applications that
use libudev.
- libudev1: libudev shared library
This library provides access to udev device information.
- libudev1-dbgsym: debug symbols for package libudev1
This library provides access to udev device information.
- libudev1-udeb: libudev shared library
This library provides access to udev device information.
.
This is a minimal version, only for use in the installation system.
- libudev1-udeb-dbgsym: debug symbols for package libudev1-udeb
This library provides access to udev device information.
.
This is a minimal version, only for use in the installation system.
- systemd: system and service manager
systemd is a system and service manager for Linux. It provides aggressive
parallelization capabilities, uses socket and D-Bus activation for starting
services, offers on-demand starting of daemons, keeps track of processes
using Linux control groups, supports snapshotting and restoring of the system
state, maintains mount and automount points and implements an elaborate
transactional dependency-based service control logic.
.
systemd is compatible with SysV and LSB init scripts and can work as a
drop-in replacement for sysvinit.
.
Installing the systemd package will not switch your init system unless you
boot with init=/bin/systemd or install systemd-sysv in addition.
- systemd-container: systemd container/nspawn tools
This package provides systemd's tools for nspawn and container/VM management:
* systemd-nspawn
* systemd-machined and machinectl
* systemd-importd
- systemd-container-dbgsym: debug symbols for package systemd-container
This package provides systemd's tools for nspawn and container/VM management:
* systemd-nspawn
* systemd-machined and machinectl
* systemd-importd
- systemd-coredump: tools for storing and retrieving coredumps
This package provides systemd tools for storing and retrieving coredumps:
* systemd-coredump
* coredumpctl
- systemd-coredump-dbgsym: debug symbols for package systemd-coredump
This package provides systemd tools for storing and retrieving coredumps:
* systemd-coredump
* coredumpctl
- systemd-dbg: system and service manager (debug symbols)
This package contains the debugging symbols for systemd, udev and
related libraries.
- systemd-dbgsym: debug symbols for package systemd
systemd is a system and service manager for Linux. It provides aggressive
parallelization capabilities, uses socket and D-Bus activation for starting
services, offers on-demand starting of daemons, keeps track of processes
using Linux control groups, supports snapshotting and restoring of the system
state, maintains mount and automount points and implements an elaborate
transactional dependency-based service control logic.
.
systemd is compatible with SysV and LSB init scripts and can work as a
drop-in replacement for sysvinit.
.
Installing the systemd package will not switch your init system unless you
boot with init=/bin/systemd or install systemd-sysv in addition.
- systemd-journal-remote: tools for sending and receiving remote journal logs
This package provides tools for sending and receiving remote journal logs:
* systemd-journal- remote
* systemd-journal- upload
* systemd-journal- gatewayd
- systemd-journal-remote-dbgsym: debug symbols for package systemd-journal-remote
This package provides tools for sending and receiving remote journal logs:
* systemd-journal- remote
* systemd-journal- upload
* systemd-journal- gatewayd
- systemd-sysv: system and service manager - SysV links
systemd is a system and service manager for Linux. It provides aggressive
parallelization capabilities, uses socket and D-Bus activation for starting
services, offers on-demand starting of daemons, keeps track of processes
using Linux control groups, supports snapshotting and restoring of the system
state, maintains mount and automount points and implements an elaborate
transactional dependency-based service control logic.
.
systemd is compatible with SysV and LSB init scripts and can work as a
drop-in replacement for sysvinit.
.
This package provides the manual pages and links needed for systemd
to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
link to systemd.
- systemd-sysv-dbgsym: debug symbols for package systemd-sysv
systemd is a system and service manager for Linux. It provides aggressive
parallelization capabilities, uses socket and D-Bus activation for starting
services, offers on-demand starting of daemons, keeps track of processes
using Linux control groups, supports snapshotting and restoring of the system
state, maintains mount and automount points and implements an elaborate
transactional dependency-based service control logic.
.
systemd is compatible with SysV and LSB init scripts and can work as a
drop-in replacement for sysvinit.
.
This package provides the manual pages and links needed for systemd
to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
link to systemd.
- udev: /dev/ and hotplug management daemon
udev is a daemon which dynamically creates and removes device nodes from
/dev/, handles hotplug events and loads drivers at boot time.
- udev-dbgsym: debug symbols for package udev
udev is a daemon which dynamically creates and removes device nodes from
/dev/, handles hotplug events and loads drivers at boot time.
- udev-udeb: /dev/ and hotplug management daemon
udev is a daemon which dynamically creates and removes device nodes from
/dev/, handles hotplug events and loads drivers at boot time.
.
This is a minimal version, only for use in the installation system.
- udev-udeb-dbgsym: debug symbols for package udev-udeb
udev is a daemon which dynamically creates and removes device nodes from
/dev/, handles hotplug events and loads drivers at boot time.
.
This is a minimal version, only for use in the installation system.