[ 5750.982259] cfg80211: All devices are disconnected, going to restore regulatory settings [ 5750.982266] cfg80211: Restoring regulatory settings [ 5750.982272] cfg80211: Calling CRDA to update world regulatory domain [ 5751.141970] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 5751.141972] cfg80211: World regulatory domain updated: [ 5751.141973] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5751.141975] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5751.141977] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5751.141978] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5751.141979] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5751.141981] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5751.864092] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [ 5751.864099] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [ 5751.864104] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [ 5751.864119] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5751.864135] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5751.864176] e1000e 0000:00:19.0: PME# disabled [ 5756.411330] PM: Syncing filesystems ... done. [ 5756.495495] PM: Preparing system for mem sleep [ 5757.068566] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 5757.084388] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 5757.100362] PM: Entering mem sleep [ 5757.100430] Suspending console(s) (use no_console_suspend to debug) [ 5757.100752] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5757.100937] sd 0:0:0:0: [sda] Stopping disk [ 5757.307839] PM: suspend of drv:tpm_tis dev:00:0a complete after 190.844 msecs [ 5757.308103] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 5757.308119] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 5757.308194] ACPI handle has no context! [ 5757.309136] sdhci-pci 0000:0d:00.0: PCI INT A disabled [ 5757.323840] i915 0000:00:02.0: power state changed by ACPI to D3 [ 5757.404957] e1000e 0000:00:19.0: PME# enabled [ 5757.404966] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 5757.411979] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 5757.419516] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 111.638 msecs [ 5757.427527] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.674 msecs [ 5757.601456] PM: suspend of drv:sd dev:0:0:0:0 complete after 501.834 msecs [ 5757.601544] PM: suspend of drv:scsi dev:target0:0:0 complete after 501.915 msecs [ 5757.601580] PM: suspend of drv:scsi dev:host0 complete after 485.295 msecs [ 5757.631073] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 323.725 msecs [ 5757.631119] PM: suspend of drv: dev:pci0000:00 complete after 323.610 msecs [ 5757.631154] PM: suspend of devices complete after 531.842 msecs [ 5757.631156] PM: suspend devices took 0.532 seconds [ 5757.647177] ehci_hcd 0000:00:1d.0: PME# enabled [ 5757.647184] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 5757.663006] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 5757.663237] ehci_hcd 0000:00:1a.0: PME# enabled [ 5757.663242] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 5757.678973] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 5757.694998] PM: late suspend of devices complete after 63.981 msecs [ 5757.695167] ACPI: Preparing to enter system sleep state S3 [ 5757.866616] PM: Saving platform NVS memory [ 5757.869515] Disabling non-boot CPUs ... [ 5757.871105] CPU 1 is now offline [ 5757.974287] CPU 2 is now offline [ 5758.078048] CPU 3 is now offline [ 5758.078377] Extended CMOS year: 2000 [ 5758.078631] ACPI: Low-level resume complete [ 5758.078706] PM: Restoring platform NVS memory [ 5758.080725] Extended CMOS year: 2000 [ 5758.080856] Enabling non-boot CPUs ... [ 5758.080963] Booting Node 0 Processor 1 APIC 0x1 [ 5758.080964] smpboot cpu 1: start_ip = 98000 [ 5758.091871] Calibrating delay loop (skipped) already calibrated this CPU [ 5758.091884] Disabled fast string operations [ 5758.112202] NMI watchdog enabled, takes one hw-pmu counter. [ 5758.144424] CPU1 is up [ 5758.144574] Booting Node 0 Processor 2 APIC 0x2 [ 5758.144575] smpboot cpu 2: start_ip = 98000 [ 5758.155480] Calibrating delay loop (skipped) already calibrated this CPU [ 5758.155493] Disabled fast string operations [ 5758.175868] NMI watchdog enabled, takes one hw-pmu counter. [ 5758.236138] CPU2 is up [ 5758.236370] Booting Node 0 Processor 3 APIC 0x3 [ 5758.236371] smpboot cpu 3: start_ip = 98000 [ 5758.247278] Calibrating delay loop (skipped) already calibrated this CPU [ 5758.247291] Disabled fast string operations [ 5758.267763] NMI watchdog enabled, takes one hw-pmu counter. [ 5758.304036] CPU3 is up [ 5758.307591] ACPI: Waking up from system sleep state S3 [ 5758.627268] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5758.627276] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 5758.627294] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5758.627307] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xf1525004) [ 5758.627313] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 5758.627330] serial 0000:00:16.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 5758.627343] serial 0000:00:16.3: restoring config space at offset 0x5 (was 0x0, writing 0xf152c000) [ 5758.627346] serial 0000:00:16.3: restoring config space at offset 0x4 (was 0x1, writing 0x40b1) [ 5758.627352] serial 0000:00:16.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [ 5758.627371] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5758.627382] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x4081) [ 5758.627389] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [ 5758.627413] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5758.627427] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf152a000) [ 5758.627434] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 5758.627454] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 5758.627458] ehci_hcd 0000:00:1a.0: PME# disabled [ 5758.627461] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 5758.627464] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 5758.627479] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 5758.627492] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1520004) [ 5758.627496] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5758.627501] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 5758.627535] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5758.627549] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 5758.627554] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 5758.627559] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [ 5758.627569] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5758.627575] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 5758.627623] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [ 5758.627637] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 5758.627642] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf140f140) [ 5758.627647] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [ 5758.627657] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5758.627663] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5758.627712] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5758.627726] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xf0b1f041) [ 5758.627731] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf130f0c0) [ 5758.627735] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [ 5758.627746] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5758.627752] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5758.627789] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5758.627804] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf1529000) [ 5758.627810] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 5758.627825] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 5758.627829] ehci_hcd 0000:00:1d.0: PME# disabled [ 5758.627831] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5758.627834] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5758.627892] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 5758.628060] iwlwifi 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 5758.628189] iwlwifi 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1400004) [ 5758.628223] iwlwifi 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5758.628267] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 5758.628520] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5758.628551] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0c00000) [ 5758.628557] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 5758.628562] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x2 (was 0x8050104, writing 0x8050107) [ 5758.628568] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 5758.628574] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x0 (was 0xe8231180, writing 0xe8221180) [ 5758.628612] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 5758.628689] PM: early resume of devices complete after 1.465 msecs [ 5758.628811] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 5758.628913] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 5758.628940] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 5758.628954] e1000e 0000:00:19.0: PME# disabled [ 5758.628961] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5758.628966] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5758.628972] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 5758.629015] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 5758.629073] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 5758.629075] ahci 0000:00:1f.2: setting latency timer to 64 [ 5758.629080] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5758.629085] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5758.629109] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5758.629124] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5758.629131] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5758.629133] i915 0000:00:02.0: power state changed by ACPI to D0 [ 5758.629139] i915 0000:00:02.0: power state changed by ACPI to D0 [ 5758.629141] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5758.629148] i915 0000:00:02.0: setting latency timer to 64 [ 5758.629177] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 5758.643106] sd 0:0:0:0: [sda] Starting disk [ 5758.668144] Extended CMOS year: 2000 [ 5758.697514] watchdog: only one watchdog can use /dev/watchdog. [ 5758.697523] watchdog: error registering /dev/watchdog (err=-16). [ 5758.697526] mei: unable to register watchdog device. [ 5758.730459] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 101.887 msecs [ 5758.751359] PM: resume of drv:usb-storage dev:2-1.2:1.0 complete after 122.089 msecs [ 5758.751389] PM: resume of drv: dev:ep_81 complete after 122.111 msecs [ 5758.751408] PM: resume of drv: dev:ep_02 complete after 122.109 msecs [ 5758.751413] PM: resume of drv:scsi dev:host6 complete after 122.089 msecs [ 5758.751419] PM: resume of drv:scsi_host dev:host6 complete after 122.079 msecs [ 5758.751423] PM: resume of drv:scsi dev:target6:0:0 complete after 122.068 msecs [ 5758.751427] PM: resume of drv: dev:ep_00 complete after 122.117 msecs [ 5758.751434] PM: resume of drv:sd dev:6:0:0:0 complete after 122.062 msecs [ 5758.751441] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 122.053 msecs [ 5758.806834] PM: resume of drv: dev:ep_00 complete after 177.870 msecs [ 5758.806840] PM: resume of drv:hub dev:1-1:1.0 complete after 177.913 msecs [ 5758.806849] PM: resume of drv: dev:ep_81 complete after 177.907 msecs [ 5758.878789] usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd [ 5758.978391] ata5: SATA link down (SStatus 0 SControl 300) [ 5758.978429] ata2: SATA link down (SStatus 0 SControl 300) [ 5758.980364] PM: resume of drv:uvcvideo dev:1-1.6:1.0 complete after 351.694 msecs [ 5758.980406] PM: resume of drv: dev:ep_00 complete after 351.694 msecs [ 5758.980414] PM: resume of drv: dev:ep_81 complete after 351.733 msecs [ 5758.980454] PM: resume of drv:uvcvideo dev:1-1.6:1.1 complete after 351.755 msecs [ 5759.010911] PM: resume of drv:i915 dev:0000:00:02.0 complete after 383.009 msecs [ 5759.130037] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 5759.130097] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.382 msecs [ 5760.534846] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5760.536013] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5760.536025] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5760.536032] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 5760.538283] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5760.538293] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5760.538300] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 5760.539248] ata1.00: configured for UDMA/100 [ 5760.569730] PM: resume of drv:sd dev:0:0:0:0 complete after 1944.840 msecs [ 5760.569775] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1944.870 msecs [ 5760.569793] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1905.945 msecs [ 5760.570554] PM: resume of devices complete after 1946.245 msecs [ 5760.570618] PM: resume devices took 1.944 seconds [ 5760.570718] PM: Finishing wakeup. [ 5760.570719] Restarting tasks ... done. [ 5760.592217] video LNXVIDEO:00: Restoring backlight state [ 5760.610290] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 5761.460937] e1000e 0000:00:19.0: PME# enabled [ 5761.540523] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [ 5761.540541] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [ 5761.540546] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [ 5761.540561] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5761.540578] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5761.540636] e1000e 0000:00:19.0: PME# disabled [ 5761.668198] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 5761.724153] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 5761.724514] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5761.725308] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 5761.725506] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 5761.850508] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5762.919515] e1000e 0000:00:19.0: PME# enabled [ 5767.597268] wlan0: authenticate with 00:27:0d:71:93:00 (try 1) [ 5767.600256] wlan0: authenticated [ 5767.601138] wlan0: associate with 00:27:0d:71:93:00 (try 1) [ 5767.603535] wlan0: RX AssocResp from 00:27:0d:71:93:00 (capab=0x421 status=0 aid=80) [ 5767.603542] wlan0: associated [ 5767.607941] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5767.608019] cfg80211: Calling CRDA for country: US [ 5767.611194] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611198] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611200] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611203] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611205] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611209] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611212] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611216] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611219] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611223] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611226] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611230] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611233] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611237] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611240] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611244] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611247] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611250] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611254] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611258] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611261] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611264] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611267] cfg80211: Disabling freq 2467 MHz [ 5767.611269] cfg80211: Disabling freq 2472 MHz [ 5767.611271] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611275] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5767.611277] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611281] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5767.611283] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611287] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5767.611290] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611293] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5767.611296] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611300] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611304] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611307] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611310] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611313] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611317] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611320] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611324] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611327] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611331] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611334] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611336] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611339] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611342] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611345] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611348] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611351] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611353] cfg80211: Disabling freq 5600 MHz [ 5767.611354] cfg80211: Disabling freq 5620 MHz [ 5767.611356] cfg80211: Disabling freq 5640 MHz [ 5767.611358] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611361] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611364] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611367] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611369] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611372] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611374] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611377] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5767.611380] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611383] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5767.611385] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611388] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5767.611390] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611393] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5767.611396] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 5767.611399] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5767.611403] cfg80211: Regulatory domain changed to country: US [ 5767.611405] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5767.611408] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5767.611411] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5767.611413] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611416] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611419] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5767.611421] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5770.196855] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [ 5770.196861] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [ 5770.196866] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [ 5770.196880] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5770.196895] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5770.196921] e1000e 0000:00:19.0: PME# disabled [ 5770.196979] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 5770.447924] e1000e 0000:00:19.0: PME# enabled [ 5770.767262] wlan0: deauthenticating from 00:27:0d:71:93:00 by local choice (reason=3) [ 5770.808049] cfg80211: All devices are disconnected, going to restore regulatory settings [ 5770.808055] cfg80211: Restoring regulatory settings [ 5770.808061] cfg80211: Calling CRDA to update world regulatory domain [ 5770.814533] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 5770.814542] cfg80211: World regulatory domain updated: [ 5770.814544] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5770.814549] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5770.814551] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5770.814554] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5770.814556] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5770.814559] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5771.282425] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [ 5771.282433] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [ 5771.282438] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [ 5771.282454] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5771.282471] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5771.282516] e1000e 0000:00:19.0: PME# disabled [ 5772.643661] PM: Syncing filesystems ... done. [ 5772.708908] PM: Preparing system for mem sleep [ 5773.321985] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 5773.337889] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 5773.353865] PM: Entering mem sleep [ 5773.353937] Suspending console(s) (use no_console_suspend to debug) [ 5773.354187] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5773.354401] sd 0:0:0:0: [sda] Stopping disk [ 5773.557345] PM: suspend of drv:tpm_tis dev:00:0a complete after 191.251 msecs [ 5773.557575] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 5773.558274] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 5773.558343] ACPI handle has no context! [ 5773.558608] sdhci-pci 0000:0d:00.0: PCI INT A disabled [ 5773.573196] i915 0000:00:02.0: power state changed by ACPI to D3 [ 5773.653242] e1000e 0000:00:19.0: PME# enabled [ 5773.653252] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 5773.661562] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 5773.668984] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 110.953 msecs [ 5773.677046] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.725 msecs [ 5773.805723] PM: suspend of drv:sd dev:0:0:0:0 complete after 452.554 msecs [ 5773.805813] PM: suspend of drv:scsi dev:target0:0:0 complete after 452.651 msecs [ 5773.805835] PM: suspend of drv:scsi dev:host0 complete after 440.377 msecs [ 5773.828697] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 271.766 msecs [ 5773.828737] PM: suspend of drv: dev:pci0000:00 complete after 270.979 msecs [ 5773.828774] PM: suspend of devices complete after 475.825 msecs [ 5773.828777] PM: suspend devices took 0.476 seconds [ 5773.844799] ehci_hcd 0000:00:1d.0: PME# enabled [ 5773.844806] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 5773.860717] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 5773.860911] ehci_hcd 0000:00:1a.0: PME# enabled [ 5773.860915] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 5773.876601] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 5773.892684] PM: late suspend of devices complete after 64.048 msecs [ 5773.892853] ACPI: Preparing to enter system sleep state S3 [ 5774.064240] PM: Saving platform NVS memory [ 5774.067187] Disabling non-boot CPUs ... [ 5774.068678] CPU 1 is now offline [ 5774.171905] CPU 2 is now offline [ 5774.275674] CPU 3 is now offline [ 5774.276006] Extended CMOS year: 2000 [ 5774.276258] ACPI: Low-level resume complete [ 5774.276297] PM: Restoring platform NVS memory [ 5774.277139] Extended CMOS year: 2000 [ 5774.277175] Enabling non-boot CPUs ... [ 5774.277273] Booting Node 0 Processor 1 APIC 0x1 [ 5774.277274] smpboot cpu 1: start_ip = 98000 [ 5774.288181] Calibrating delay loop (skipped) already calibrated this CPU [ 5774.288194] Disabled fast string operations [ 5774.308445] NMI watchdog enabled, takes one hw-pmu counter. [ 5774.388636] CPU1 is up [ 5774.388721] Booting Node 0 Processor 2 APIC 0x2 [ 5774.388722] smpboot cpu 2: start_ip = 98000 [ 5774.399627] Calibrating delay loop (skipped) already calibrated this CPU [ 5774.399640] Disabled fast string operations [ 5774.419966] NMI watchdog enabled, takes one hw-pmu counter. [ 5774.496394] CPU2 is up [ 5774.496471] Booting Node 0 Processor 3 APIC 0x3 [ 5774.496472] smpboot cpu 3: start_ip = 98000 [ 5774.507376] Calibrating delay loop (skipped) already calibrated this CPU [ 5774.507388] Disabled fast string operations [ 5774.527814] NMI watchdog enabled, takes one hw-pmu counter. [ 5774.604250] CPU3 is up [ 5774.607816] ACPI: Waking up from system sleep state S3 [ 5774.799820] thinkpad_acpi: EC reports that Thermal Table has changed [ 5774.979314] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5774.979322] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 5774.979341] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5774.979354] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xf1525004) [ 5774.979359] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 5774.979378] serial 0000:00:16.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 5774.979390] serial 0000:00:16.3: restoring config space at offset 0x5 (was 0x0, writing 0xf152c000) [ 5774.979394] serial 0000:00:16.3: restoring config space at offset 0x4 (was 0x1, writing 0x40b1) [ 5774.979400] serial 0000:00:16.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [ 5774.979420] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5774.979431] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x4081) [ 5774.979438] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [ 5774.979462] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5774.979476] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf152a000) [ 5774.979483] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 5774.979503] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 5774.979508] ehci_hcd 0000:00:1a.0: PME# disabled [ 5774.979512] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 5774.979515] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 5774.979530] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 5774.979543] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1520004) [ 5774.979547] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5774.979552] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 5774.979587] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5774.979600] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 5774.979605] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 5774.979610] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 5774.979620] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5774.979627] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 5774.979675] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [ 5774.979689] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 5774.979694] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf140f140) [ 5774.979699] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [ 5774.979709] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5774.979715] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5774.979764] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5774.979778] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xf0b1f041) [ 5774.979783] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf130f0c0) [ 5774.979788] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 5774.979798] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5774.979804] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5774.979841] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5774.979855] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf1529000) [ 5774.979862] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 5774.979877] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 5774.979881] ehci_hcd 0000:00:1d.0: PME# disabled [ 5774.979883] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5774.979886] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5774.979944] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 5774.980112] iwlwifi 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 5774.980241] iwlwifi 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1400004) [ 5774.980276] iwlwifi 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5774.980320] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 5774.980575] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5774.980605] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0c00000) [ 5774.980611] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 5774.980617] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x2 (was 0x8050104, writing 0x8050107) [ 5774.980623] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 5774.980629] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x0 (was 0xe8231180, writing 0xe8221180) [ 5774.980668] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 5774.980749] PM: early resume of devices complete after 1.480 msecs [ 5774.980820] i915 0000:00:02.0: power state changed by ACPI to D0 [ 5774.980823] i915 0000:00:02.0: power state changed by ACPI to D0 [ 5774.980828] i915 0000:00:02.0: setting latency timer to 64 [ 5774.980854] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 5774.980861] e1000e 0000:00:19.0: PME# disabled [ 5774.980882] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 5774.980905] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 5774.980911] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 5774.980921] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5774.980928] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5774.980948] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5774.980951] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 5774.980959] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 5774.980974] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5774.980979] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5774.980987] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5774.980995] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5774.981016] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 5774.981021] ahci 0000:00:1f.2: setting latency timer to 64 [ 5774.981107] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5774.981150] sd 0:0:0:0: [sda] Starting disk [ 5774.983050] watchdog: only one watchdog can use /dev/watchdog. [ 5774.983052] watchdog: error registering /dev/watchdog (err=-16). [ 5774.983053] mei: unable to register watchdog device. [ 5775.020616] Extended CMOS year: 2000 [ 5775.158884] PM: resume of drv:hub dev:1-1:1.0 complete after 178.115 msecs [ 5775.158889] PM: resume of drv:hub dev:2-1:1.0 complete after 178.104 msecs [ 5775.158897] PM: resume of drv: dev:ep_00 complete after 178.118 msecs [ 5775.158904] PM: resume of drv: dev:ep_00 complete after 178.117 msecs [ 5775.158913] PM: resume of drv: dev:ep_81 complete after 178.128 msecs [ 5775.158924] PM: resume of drv: dev:ep_81 complete after 178.148 msecs [ 5775.159152] PM: resume of drv:usb-storage dev:2-1.2:1.0 complete after 178.334 msecs [ 5775.159158] PM: resume of drv: dev:ep_00 complete after 178.328 msecs [ 5775.159170] PM: resume of drv:scsi dev:host6 complete after 178.334 msecs [ 5775.159174] PM: resume of drv: dev:ep_02 complete after 178.347 msecs [ 5775.159178] PM: resume of drv:scsi_host dev:host6 complete after 178.337 msecs [ 5775.159181] PM: resume of drv: dev:ep_81 complete after 178.361 msecs [ 5775.159183] PM: resume of drv:scsi dev:target6:0:0 complete after 178.332 msecs [ 5775.159195] PM: resume of drv:sd dev:6:0:0:0 complete after 178.345 msecs [ 5775.159226] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 178.374 msecs [ 5775.230748] usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd [ 5775.238557] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 258.294 msecs [ 5775.314467] ata2: SATA link down (SStatus 0 SControl 300) [ 5775.314508] ata5: SATA link down (SStatus 0 SControl 300) [ 5775.332363] PM: resume of drv:uvcvideo dev:1-1.6:1.0 complete after 351.950 msecs [ 5775.332403] PM: resume of drv: dev:ep_00 complete after 351.984 msecs [ 5775.332441] PM: resume of drv: dev:ep_81 complete after 352.033 msecs [ 5775.332444] PM: resume of drv:uvcvideo dev:1-1.6:1.1 complete after 352.027 msecs [ 5775.367149] PM: resume of drv:i915 dev:0000:00:02.0 complete after 387.220 msecs [ 5775.482092] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 5775.482153] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.233 msecs [ 5776.759189] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5776.760292] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5776.760303] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5776.760310] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 5776.762579] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 5776.762589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 5776.762596] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 5776.763543] ata1.00: configured for UDMA/100 [ 5776.797429] PM: resume of drv:sd dev:0:0:0:0 complete after 1820.389 msecs [ 5776.797493] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1820.451 msecs [ 5776.797503] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1780.894 msecs [ 5776.798245] PM: resume of devices complete after 1821.593 msecs [ 5776.798309] PM: resume devices took 1.820 seconds [ 5776.798387] PM: Finishing wakeup. [ 5776.798388] Restarting tasks ... done. [ 5776.803659] usb 2-1.2: USB disconnect, device number 3 [ 5776.811966] video LNXVIDEO:00: Restoring backlight state [ 5776.821898] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 5778.193684] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 5778.251862] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 5778.252157] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5778.252807] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 5778.253010] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 5778.376888] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5778.646902] quiet_error: 36 callbacks suppressed [ 5778.646905] Buffer I/O error on device dm-1, logical block 196608 [ 5778.646907] lost page write due to I/O error on dm-1 [ 5778.646912] JBD2: I/O error detected when updating journal superblock for dm-1-8. [ 5778.646993] Buffer I/O error on device dm-1, logical block 0 [ 5778.646995] lost page write due to I/O error on dm-1 [ 5779.867598] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [ 5779.939942] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [ 5781.333880] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [ 5781.579089] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [ 5781.647217] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [ 5784.293207] wlan0: authenticate with 00:27:0d:71:93:00 (try 1) [ 5784.295466] wlan0: authenticated [ 5784.298854] wlan0: associate with 00:27:0d:71:93:00 (try 1) [ 5784.302248] wlan0: RX AssocResp from 00:27:0d:71:93:00 (capab=0x421 status=0 aid=31) [ 5784.302253] wlan0: associated [ 5784.306054] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5784.306150] cfg80211: Calling CRDA for country: US [ 5784.312771] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312776] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312779] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312781] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312783] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312785] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312787] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312789] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312791] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312794] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312796] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312798] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312800] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312802] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312804] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312806] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312808] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312810] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312812] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312814] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312815] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312817] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312819] cfg80211: Disabling freq 2467 MHz [ 5784.312820] cfg80211: Disabling freq 2472 MHz [ 5784.312822] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312824] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5784.312825] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312827] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5784.312829] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312832] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5784.312834] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312836] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5784.312838] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312841] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312843] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312845] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312847] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312850] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312852] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312854] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312857] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312859] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312861] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312863] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312865] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312867] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312869] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312872] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312874] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312876] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312877] cfg80211: Disabling freq 5600 MHz [ 5784.312878] cfg80211: Disabling freq 5620 MHz [ 5784.312879] cfg80211: Disabling freq 5640 MHz [ 5784.312881] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312883] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312885] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312886] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312888] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312890] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312892] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312894] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5784.312895] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312897] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5784.312899] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312901] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5784.312903] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312905] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5784.312906] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 5784.312908] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5784.312913] cfg80211: Regulatory domain changed to country: US [ 5784.312914] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5784.312916] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5784.312918] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5784.312919] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312921] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312923] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5784.312925] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5794.379353] wlan0: no IPv6 routers present [ 5799.893103] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [ 5800.067533] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [ 5802.483126] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [ 5802.950853] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [ 6002.899344] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [ 6002.899354] thinkpad_acpi: unhandled HKEY event 0x6040 [ 6002.899359] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [ 6002.900344] thinkpad_acpi: EC reports that Thermal Table has changed [ 6004.129519] e1000e 0000:00:19.0: PME# enabled [ 6301.922569] CPU2: Package power limit notification (total events = 73372) [ 6301.922574] CPU0: Package power limit notification (total events = 73655) [ 6301.922593] CPU1: Package power limit notification (total events = 73656) [ 6301.922598] CPU3: Package power limit notification (total events = 73378) [ 6301.923313] CPU1: Package power limit normal [ 6301.923316] CPU2: Package power limit normal [ 6301.923319] CPU3: Package power limit normal [ 6301.923321] CPU0: Package power limit normal [ 6785.642496] CPU2: Package power limit notification (total events = 73456) [ 6785.642501] CPU3: Package power limit notification (total events = 73462) [ 6785.642505] CPU1: Package power limit notification (total events = 73740) [ 6785.642509] CPU0: Package power limit notification (total events = 73739) [ 6785.644008] CPU0: Package power limit normal [ 6785.644012] CPU2: Package power limit normal [ 6785.644014] CPU3: Package power limit normal [ 6785.644016] CPU1: Package power limit normal [ 7145.430515] CPU2: Package power limit notification (total events = 73471) [ 7145.430522] CPU1: Package power limit notification (total events = 73755) [ 7145.430525] CPU0: Package power limit notification (total events = 73754) [ 7145.430533] CPU3: Package power limit notification (total events = 73477) [ 7145.431822] CPU0: Package power limit normal [ 7145.431833] CPU3: Package power limit normal [ 7145.431842] CPU1: Package power limit normal [ 7145.431849] CPU2: Package power limit normal [ 7599.708170] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [ 7599.708195] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [ 7599.708208] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [ 7599.708243] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 7599.708284] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 7599.708347] e1000e 0000:00:19.0: PME# disabled [ 7599.708497] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 7599.963411] e1000e 0000:00:19.0: PME# enabled [ 7600.392475] wlan0: deauthenticating from 00:27:0d:71:93:00 by local choice (reason=3) [ 7600.424197] cfg80211: All devices are disconnected, going to restore regulatory settings [ 7600.424213] cfg80211: Restoring regulatory settings [ 7600.424228] cfg80211: Calling CRDA to update world regulatory domain [ 7600.577889] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 7600.577897] cfg80211: World regulatory domain updated: [ 7600.577901] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7600.577907] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7600.577911] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7600.577915] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7600.577920] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7600.577924] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7600.966939] CPU3: Package power limit notification (total events = 73489) [ 7600.966943] CPU2: Package power limit notification (total events = 73483) [ 7600.966947] CPU1: Package power limit notification (total events = 73767) [ 7600.966950] CPU0: Package power limit notification (total events = 73766) [ 7600.968810] CPU2: Package power limit normal [ 7600.968813] CPU3: Package power limit normal [ 7600.968815] CPU1: Package power limit normal [ 7600.968818] CPU0: Package power limit normal [ 7601.444233] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [ 7601.444255] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [ 7601.444272] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [ 7601.444313] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 7601.444361] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 7601.444466] e1000e 0000:00:19.0: PME# disabled [ 7606.286881] PM: Syncing filesystems ... done. [ 7606.413463] PM: Preparing system for mem sleep [ 7607.075647] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 7607.091532] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 7607.107502] PM: Entering mem sleep [ 7607.107574] Suspending console(s) (use no_console_suspend to debug) [ 7607.107915] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7607.108034] sd 0:0:0:0: [sda] Stopping disk [ 7607.314976] PM: suspend of drv:tpm_tis dev:00:0a complete after 191.243 msecs [ 7607.315207] ehci_hcd 0000:00:1d.0: PCI INT A disabled [ 7607.315222] ehci_hcd 0000:00:1a.0: PCI INT A disabled [ 7607.315715] ACPI handle has no context! [ 7607.316280] sdhci-pci 0000:0d:00.0: PCI INT A disabled [ 7607.330956] i915 0000:00:02.0: power state changed by ACPI to D3 [ 7607.412311] e1000e 0000:00:19.0: PME# enabled [ 7607.412321] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 7607.419138] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [ 7607.426650] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 111.669 msecs [ 7607.434668] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.714 msecs [ 7607.577955] PM: suspend of drv:sd dev:0:0:0:0 complete after 471.107 msecs [ 7607.578031] PM: suspend of drv:scsi dev:target0:0:0 complete after 471.114 msecs [ 7607.578079] PM: suspend of drv:scsi dev:host0 complete after 454.961 msecs [ 7607.606283] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 291.771 msecs [ 7607.606366] PM: suspend of drv: dev:pci0000:00 complete after 291.233 msecs [ 7607.606414] PM: suspend of devices complete after 499.877 msecs [ 7607.606416] PM: suspend devices took 0.500 seconds [ 7607.622384] ehci_hcd 0000:00:1d.0: PME# enabled [ 7607.622391] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 7607.638231] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 7607.638454] ehci_hcd 0000:00:1a.0: PME# enabled [ 7607.638460] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 7607.654192] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 7607.670211] PM: late suspend of devices complete after 63.934 msecs [ 7607.670381] ACPI: Preparing to enter system sleep state S3 [ 7607.841830] PM: Saving platform NVS memory [ 7607.844769] Disabling non-boot CPUs ... [ 7607.846447] CPU 1 is now offline [ 7607.949482] CPU 2 is now offline [ 7608.053269] CPU 3 is now offline [ 7608.053598] Extended CMOS year: 2000 [ 7608.053849] ACPI: Low-level resume complete [ 7608.053888] PM: Restoring platform NVS memory [ 7608.054734] Extended CMOS year: 2000 [ 7608.054769] Enabling non-boot CPUs ... [ 7608.054865] Booting Node 0 Processor 1 APIC 0x1 [ 7608.054866] smpboot cpu 1: start_ip = 98000 [ 7608.065773] Calibrating delay loop (skipped) already calibrated this CPU [ 7608.065787] Disabled fast string operations [ 7608.086047] NMI watchdog enabled, takes one hw-pmu counter. [ 7608.166223] CPU1 is up [ 7608.166309] Booting Node 0 Processor 2 APIC 0x2 [ 7608.166311] smpboot cpu 2: start_ip = 98000 [ 7608.177215] Calibrating delay loop (skipped) already calibrated this CPU [ 7608.177228] Disabled fast string operations [ 7608.197525] NMI watchdog enabled, takes one hw-pmu counter. [ 7608.273981] CPU2 is up [ 7608.274060] Booting Node 0 Processor 3 APIC 0x3 [ 7608.274061] smpboot cpu 3: start_ip = 98000 [ 7608.284965] Calibrating delay loop (skipped) already calibrated this CPU [ 7608.284977] Disabled fast string operations [ 7608.305382] NMI watchdog enabled, takes one hw-pmu counter. [ 7608.381837] CPU3 is up [ 7608.385386] ACPI: Waking up from system sleep state S3 [ 7608.577406] thinkpad_acpi: EC reports that Thermal Table has changed [ 7608.756904] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 7608.756912] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 7608.756931] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 7608.756945] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xf1525004) [ 7608.756950] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 7608.756968] serial 0000:00:16.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 7608.756981] serial 0000:00:16.3: restoring config space at offset 0x5 (was 0x0, writing 0xf152c000) [ 7608.756985] serial 0000:00:16.3: restoring config space at offset 0x4 (was 0x1, writing 0x40b1) [ 7608.756991] serial 0000:00:16.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [ 7608.757010] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 7608.757021] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x4081) [ 7608.757029] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [ 7608.757052] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 7608.757067] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf152a000) [ 7608.757074] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 7608.757094] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 7608.757099] ehci_hcd 0000:00:1a.0: PME# disabled [ 7608.757102] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 7608.757105] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 7608.757121] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 7608.757134] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1520004) [ 7608.757138] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 7608.757143] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 7608.757177] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 7608.757191] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 7608.757196] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 7608.757201] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [ 7608.757211] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 7608.757217] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [ 7608.757266] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [ 7608.757279] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 7608.757284] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf140f140) [ 7608.757289] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [ 7608.757299] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 7608.757306] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 7608.757354] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 7608.757368] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xf0b1f041) [ 7608.757373] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf130f0c0) [ 7608.757378] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [ 7608.757388] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 7608.757394] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 7608.757432] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 7608.757446] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf1529000) [ 7608.757453] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 7608.757468] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 7608.757472] ehci_hcd 0000:00:1d.0: PME# disabled [ 7608.757474] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 7608.757477] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 7608.757535] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 7608.757703] iwlwifi 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 7608.757831] iwlwifi 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1400004) [ 7608.757865] iwlwifi 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 7608.757909] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 7608.758164] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 7608.758194] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0c00000) [ 7608.758200] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 7608.758206] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x2 (was 0x8050104, writing 0x8050107) [ 7608.758212] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 7608.758218] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x0 (was 0xe8231180, writing 0xe8221180) [ 7608.758256] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 7608.758332] PM: early resume of devices complete after 1.474 msecs [ 7608.758404] i915 0000:00:02.0: power state changed by ACPI to D0 [ 7608.758408] i915 0000:00:02.0: power state changed by ACPI to D0 [ 7608.758414] i915 0000:00:02.0: setting latency timer to 64 [ 7608.758461] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 7608.758492] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 7608.758495] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 7608.758498] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 7608.758503] e1000e 0000:00:19.0: PME# disabled [ 7608.758506] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7608.758513] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 7608.758523] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7608.758534] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 7608.758537] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 7608.758546] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 7608.758556] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 7608.758566] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 7608.758594] ahci 0000:00:1f.2: setting latency timer to 64 [ 7608.758663] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 7608.758680] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7608.758683] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 7608.761002] watchdog: only one watchdog can use /dev/watchdog. [ 7608.761004] watchdog: error registering /dev/watchdog (err=-16). [ 7608.761005] mei: unable to register watchdog device. [ 7608.772786] sd 0:0:0:0: [sda] Starting disk [ 7608.797906] Extended CMOS year: 2000 [ 7608.936459] PM: resume of drv: dev:ep_00 complete after 177.834 msecs [ 7608.936475] PM: resume of drv:hub dev:1-1:1.0 complete after 177.883 msecs [ 7608.936514] PM: resume of drv: dev:ep_81 complete after 177.908 msecs [ 7609.008329] usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd [ 7609.011733] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 253.820 msecs [ 7609.092079] ata2: SATA link down (SStatus 0 SControl 300) [ 7609.108033] ata5: SATA link down (SStatus 0 SControl 300) [ 7609.110027] PM: resume of drv:uvcvideo dev:1-1.6:1.1 complete after 351.662 msecs [ 7609.110030] PM: resume of drv:uvcvideo dev:1-1.6:1.0 complete after 351.695 msecs [ 7609.110051] PM: resume of drv: dev:ep_00 complete after 351.673 msecs [ 7609.110067] PM: resume of drv: dev:ep_81 complete after 351.720 msecs [ 7609.144737] PM: resume of drv:i915 dev:0000:00:02.0 complete after 387.223 msecs [ 7609.259684] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 7609.259738] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.209 msecs [ 7610.496865] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7610.498036] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 7610.498047] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 7610.498055] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 7610.500374] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 7610.500385] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 7610.500392] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 7610.501376] ata1.00: configured for UDMA/100 [ 7610.533064] PM: resume of drv:sd dev:0:0:0:0 complete after 1778.124 msecs [ 7610.533110] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1778.154 msecs [ 7610.533129] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1739.145 msecs [ 7610.533873] PM: resume of devices complete after 1779.542 msecs [ 7610.533936] PM: resume devices took 1.780 seconds [ 7610.534014] PM: Finishing wakeup. [ 7610.534015] Restarting tasks ... done. [ 7610.560997] video LNXVIDEO:00: Restoring backlight state [ 7610.614911] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 7611.510669] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 7611.566574] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 7611.567447] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7611.569595] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 7611.569847] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 7611.698261] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7617.735510] wlan0: authenticate with 00:26:cb:c6:de:f0 (try 1) [ 7617.737564] wlan0: authenticated [ 7617.738094] wlan0: associate with 00:26:cb:c6:de:f0 (try 1) [ 7617.739905] wlan0: RX AssocResp from 00:26:cb:c6:de:f0 (capab=0x421 status=0 aid=5) [ 7617.739907] wlan0: associated [ 7617.743067] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 7617.743131] cfg80211: Calling CRDA for country: US [ 7617.747060] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747064] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747066] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747068] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747069] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747071] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747072] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747074] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747075] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747077] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747078] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747080] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747081] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747082] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747084] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747085] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747087] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747088] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747089] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747091] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747092] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747094] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747095] cfg80211: Disabling freq 2467 MHz [ 7617.747096] cfg80211: Disabling freq 2472 MHz [ 7617.747097] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747099] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 7617.747100] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747102] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 7617.747103] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747105] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 7617.747106] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747108] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 7617.747109] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747111] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747112] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747113] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747115] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747116] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747118] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747119] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747121] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747122] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747124] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747125] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747126] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747128] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747129] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747131] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747132] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747134] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747135] cfg80211: Disabling freq 5600 MHz [ 7617.747136] cfg80211: Disabling freq 5620 MHz [ 7617.747137] cfg80211: Disabling freq 5640 MHz [ 7617.747138] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747139] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747141] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747142] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747144] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747145] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747146] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747148] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 7617.747149] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747151] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 7617.747152] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747154] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 7617.747155] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747157] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 7617.747158] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 7617.747160] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 7617.747163] cfg80211: Regulatory domain changed to country: US [ 7617.747164] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7617.747165] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 7617.747167] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 7617.747168] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747170] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747171] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7617.747172] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 7628.392249] wlan0: no IPv6 routers present [ 7634.464064] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [ 7677.396754] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [10479.640866] CPU2: Package power limit notification (total events = 73490) [10479.640882] CPU0: Package power limit notification (total events = 73773) [10479.640893] CPU1: Package power limit notification (total events = 73774) [10479.640904] CPU3: Package power limit notification (total events = 73496) [10479.644155] CPU3: Package power limit normal [10479.644165] CPU2: Package power limit normal [10479.644176] CPU1: Package power limit normal [10479.644184] CPU0: Package power limit normal [10480.152250] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [10480.152253] thinkpad_acpi: unhandled HKEY event 0x6040 [10480.152254] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [10480.152850] thinkpad_acpi: EC reports that Thermal Table has changed [10481.770687] e1000e 0000:00:19.0: PME# enabled [10485.088933] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [10485.088954] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [10485.088968] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [10485.089004] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [10485.089048] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [10485.089115] e1000e 0000:00:19.0: PME# disabled [10485.089277] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [10485.340312] e1000e 0000:00:19.0: PME# enabled [10485.757596] wlan0: deauthenticating from 00:26:cb:c6:de:f0 by local choice (reason=3) [10485.787615] cfg80211: All devices are disconnected, going to restore regulatory settings [10485.787630] cfg80211: Restoring regulatory settings [10485.787642] cfg80211: Calling CRDA to update world regulatory domain [10485.950142] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [10485.950148] cfg80211: World regulatory domain updated: [10485.950151] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [10485.950156] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10485.950160] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [10485.950163] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [10485.950166] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10485.950170] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10486.537600] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [10486.537618] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [10486.537631] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [10486.537665] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [10486.537705] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [10486.537794] e1000e 0000:00:19.0: PME# disabled [10488.782843] PM: Syncing filesystems ... done. [10488.880613] PM: Preparing system for mem sleep [10489.546986] Freezing user space processes ... (elapsed 0.01 seconds) done. [10489.562868] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [10489.578838] PM: Entering mem sleep [10489.578915] Suspending console(s) (use no_console_suspend to debug) [10489.579192] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10489.579306] sd 0:0:0:0: [sda] Stopping disk [10489.782233] PM: suspend of drv:tpm_tis dev:00:0a complete after 191.577 msecs [10489.782417] ehci_hcd 0000:00:1d.0: PCI INT A disabled [10489.782428] ehci_hcd 0000:00:1a.0: PCI INT A disabled [10489.782543] ACPI handle has no context! [10489.783485] sdhci-pci 0000:0d:00.0: PCI INT A disabled [10489.798357] i915 0000:00:02.0: power state changed by ACPI to D3 [10489.877611] e1000e 0000:00:19.0: PME# enabled [10489.877622] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [10489.886354] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [10489.890033] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 107.836 msecs [10489.902013] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.854 msecs [10490.046193] PM: suspend of drv:sd dev:0:0:0:0 complete after 468.053 msecs [10490.046278] PM: suspend of drv:scsi dev:target0:0:0 complete after 468.089 msecs [10490.046313] PM: suspend of drv:scsi dev:host0 complete after 456.284 msecs [10490.077617] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 295.879 msecs [10490.077697] PM: suspend of drv: dev:pci0000:00 complete after 295.745 msecs [10490.077736] PM: suspend of devices complete after 499.865 msecs [10490.077746] PM: suspend devices took 0.500 seconds [10490.093720] ehci_hcd 0000:00:1d.0: PME# enabled [10490.093726] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [10490.109560] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [10490.109786] ehci_hcd 0000:00:1a.0: PME# enabled [10490.109791] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [10490.125524] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [10490.141545] PM: late suspend of devices complete after 63.937 msecs [10490.141714] ACPI: Preparing to enter system sleep state S3 [10490.313157] PM: Saving platform NVS memory [10490.316089] Disabling non-boot CPUs ... [10490.317608] CPU 1 is now offline [10490.420822] CPU 2 is now offline [10490.524600] CPU 3 is now offline [10490.524936] Extended CMOS year: 2000 [10490.525191] ACPI: Low-level resume complete [10490.525262] PM: Restoring platform NVS memory [10490.527300] Extended CMOS year: 2000 [10490.527434] Enabling non-boot CPUs ... [10490.527543] Booting Node 0 Processor 1 APIC 0x1 [10490.527544] smpboot cpu 1: start_ip = 98000 [10490.538451] Calibrating delay loop (skipped) already calibrated this CPU [10490.538465] Disabled fast string operations [10490.558838] NMI watchdog enabled, takes one hw-pmu counter. [10490.590981] CPU1 is up [10490.591134] Booting Node 0 Processor 2 APIC 0x2 [10490.591135] smpboot cpu 2: start_ip = 98000 [10490.602039] Calibrating delay loop (skipped) already calibrated this CPU [10490.602052] Disabled fast string operations [10490.622407] NMI watchdog enabled, takes one hw-pmu counter. [10490.650770] CPU2 is up [10490.650845] Booting Node 0 Processor 3 APIC 0x3 [10490.650846] smpboot cpu 3: start_ip = 98000 [10490.661749] Calibrating delay loop (skipped) already calibrated this CPU [10490.661761] Disabled fast string operations [10490.682218] NMI watchdog enabled, takes one hw-pmu counter. [10490.714730] CPU3 is up [10490.718272] ACPI: Waking up from system sleep state S3 [10491.037909] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10491.037917] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [10491.037935] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10491.037949] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xf1525004) [10491.037955] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [10491.037972] serial 0000:00:16.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [10491.037984] serial 0000:00:16.3: restoring config space at offset 0x5 (was 0x0, writing 0xf152c000) [10491.037988] serial 0000:00:16.3: restoring config space at offset 0x4 (was 0x1, writing 0x40b1) [10491.037994] serial 0000:00:16.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [10491.038013] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [10491.038024] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x4081) [10491.038032] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [10491.038055] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10491.038070] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf152a000) [10491.038076] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [10491.038096] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [10491.038101] ehci_hcd 0000:00:1a.0: PME# disabled [10491.038104] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [10491.038107] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [10491.038122] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [10491.038135] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1520004) [10491.038139] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [10491.038144] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [10491.038178] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10491.038192] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [10491.038197] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [10491.038202] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [10491.038212] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [10491.038219] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [10491.038267] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [10491.038280] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [10491.038285] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf140f140) [10491.038290] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [10491.038300] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [10491.038307] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [10491.038355] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10491.038369] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xf0b1f041) [10491.038374] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf130f0c0) [10491.038379] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [10491.038389] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [10491.038395] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [10491.038432] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [10491.038447] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf1529000) [10491.038453] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [10491.038468] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [10491.038472] ehci_hcd 0000:00:1d.0: PME# disabled [10491.038474] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [10491.038477] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [10491.038535] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [10491.038702] iwlwifi 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [10491.038831] iwlwifi 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1400004) [10491.038865] iwlwifi 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [10491.038909] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [10491.039163] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10491.039194] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0c00000) [10491.039200] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [10491.039206] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x2 (was 0x8050104, writing 0x8050107) [10491.039212] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [10491.039218] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x0 (was 0xe8231180, writing 0xe8221180) [10491.039256] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [10491.039332] PM: early resume of devices complete after 1.468 msecs [10491.039399] i915 0000:00:02.0: power state changed by ACPI to D0 [10491.039403] i915 0000:00:02.0: power state changed by ACPI to D0 [10491.039409] i915 0000:00:02.0: setting latency timer to 64 [10491.039453] mei 0000:00:16.0: irq 43 for MSI/MSI-X [10491.039485] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [10491.039488] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [10491.039490] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [10491.039493] e1000e 0000:00:19.0: PME# disabled [10491.039498] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [10491.039506] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [10491.039513] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [10491.039521] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [10491.039529] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [10491.039534] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [10491.039549] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [10491.039559] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [10491.039585] ahci 0000:00:1f.2: setting latency timer to 64 [10491.039600] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [10491.039612] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [10491.039702] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [10491.053768] sd 0:0:0:0: [sda] Starting disk [10491.074592] Extended CMOS year: 2000 [10491.141020] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 101.767 msecs [10491.144074] watchdog: only one watchdog can use /dev/watchdog. [10491.144079] watchdog: error registering /dev/watchdog (err=-16). [10491.144083] mei: unable to register watchdog device. [10491.217405] PM: resume of drv:hub dev:1-1:1.0 complete after 177.629 msecs [10491.217450] PM: resume of drv: dev:ep_81 complete after 177.675 msecs [10491.217466] PM: resume of drv: dev:ep_00 complete after 177.678 msecs [10491.289441] usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd [10491.381048] ata5: SATA link down (SStatus 0 SControl 300) [10491.391086] PM: resume of drv:uvcvideo dev:1-1.6:1.0 complete after 351.556 msecs [10491.391126] PM: resume of drv: dev:ep_00 complete after 351.564 msecs [10491.391134] PM: resume of drv: dev:ep_81 complete after 351.597 msecs [10491.391171] PM: resume of drv:uvcvideo dev:1-1.6:1.1 complete after 351.626 msecs [10491.397002] ata2: SATA link down (SStatus 0 SControl 300) [10491.425534] PM: resume of drv:i915 dev:0000:00:02.0 complete after 387.025 msecs [10491.540677] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [10491.540735] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.231 msecs [10493.001356] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [10493.002544] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [10493.002555] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [10493.002562] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [10493.004842] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [10493.004852] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [10493.004859] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [10493.005831] ata1.00: configured for UDMA/100 [10493.037239] PM: resume of drv:sd dev:0:0:0:0 complete after 2001.650 msecs [10493.037285] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2001.669 msecs [10493.037302] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1967.148 msecs [10493.038049] PM: resume of devices complete after 2003.224 msecs [10493.038112] PM: resume devices took 2.004 seconds [10493.038188] PM: Finishing wakeup. [10493.038189] Restarting tasks ... done. [10493.058668] video LNXVIDEO:00: Restoring backlight state [10493.193624] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [10493.783834] e1000e 0000:00:19.0: PME# enabled [10493.919344] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [10493.919352] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [10493.919357] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [10493.919371] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [10493.919386] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [10493.919426] e1000e 0000:00:19.0: PME# disabled [10494.043084] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [10494.098968] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [10494.100224] ADDRCONF(NETDEV_UP): eth0: link is not ready [10494.103589] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [10494.103832] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [10494.230714] ADDRCONF(NETDEV_UP): wlan0: link is not ready [10495.299252] e1000e 0000:00:19.0: PME# enabled [10495.751879] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [10497.165990] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [10500.215932] wlan0: authenticate with 00:26:cb:c6:e1:70 (try 1) [10500.217917] wlan0: authenticated [10500.256730] wlan0: associate with 00:26:cb:c6:e1:70 (try 1) [10500.259796] wlan0: RX AssocResp from 00:26:cb:c6:e1:70 (capab=0x421 status=0 aid=61) [10500.259800] wlan0: associated [10500.263678] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [10500.263765] cfg80211: Calling CRDA for country: US [10500.267702] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [10500.267706] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267708] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [10500.267710] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267712] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [10500.267714] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267715] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [10500.267717] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267718] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [10500.267720] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267722] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [10500.267724] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267725] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [10500.267727] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267729] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [10500.267730] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267732] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [10500.267734] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267735] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [10500.267737] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267739] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [10500.267740] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267742] cfg80211: Disabling freq 2467 MHz [10500.267743] cfg80211: Disabling freq 2472 MHz [10500.267744] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [10500.267746] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [10500.267748] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [10500.267750] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [10500.267751] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [10500.267753] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [10500.267754] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [10500.267756] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [10500.267758] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [10500.267760] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267761] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [10500.267763] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267765] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [10500.267766] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267768] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [10500.267770] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267771] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [10500.267773] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267775] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [10500.267776] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267778] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [10500.267780] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267781] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [10500.267783] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267785] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [10500.267787] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267788] cfg80211: Disabling freq 5600 MHz [10500.267790] cfg80211: Disabling freq 5620 MHz [10500.267791] cfg80211: Disabling freq 5640 MHz [10500.267793] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [10500.267795] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267797] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [10500.267798] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267800] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [10500.267802] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267803] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [10500.267805] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [10500.267807] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [10500.267809] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [10500.267810] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [10500.267812] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [10500.267814] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [10500.267815] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [10500.267817] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [10500.267819] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [10500.267823] cfg80211: Regulatory domain changed to country: US [10500.267824] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [10500.267826] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [10500.267827] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [10500.267829] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267831] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267832] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10500.267834] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [10510.800892] wlan0: no IPv6 routers present [10516.769045] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [10516.901201] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [10519.030590] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [10519.674004] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [10849.495255] CPU2: Package power limit notification (total events = 73513) [10849.495261] CPU3: Package power limit notification (total events = 73519) [10849.495265] CPU1: Package power limit notification (total events = 73797) [10849.495268] CPU0: Package power limit notification (total events = 73796) [10849.496499] CPU2: Package power limit normal [10849.496501] CPU3: Package power limit normal [10849.496504] CPU1: Package power limit normal [10849.496506] CPU0: Package power limit normal [11195.062471] CPU1: Package power limit notification (total events = 73810) [11195.062474] CPU0: Package power limit notification (total events = 73809) [11195.062495] CPU3: Package power limit notification (total events = 73532) [11195.062498] CPU2: Package power limit notification (total events = 73526) [11195.062585] CPU1: Package power limit normal [11195.062589] CPU0: Package power limit normal [11195.062603] CPU3: Package power limit normal [11195.062606] CPU2: Package power limit normal [11698.451498] CPU3: Package power limit notification (total events = 73536) [11698.451501] CPU2: Package power limit notification (total events = 73530) [11698.451528] CPU1: Package power limit notification (total events = 73814) [11698.451530] CPU0: Package power limit notification (total events = 73813) [11698.453843] CPU3: Package power limit normal [11698.453846] CPU1: Package power limit normal [11698.453849] CPU0: Package power limit normal [11698.453850] CPU2: Package power limit normal [12003.830420] CPU2: Package power limit notification (total events = 73579) [12003.830424] CPU3: Package power limit notification (total events = 73585) [12003.830428] CPU1: Package power limit notification (total events = 73863) [12003.830431] CPU0: Package power limit notification (total events = 73862) [12003.832326] CPU0: Package power limit normal [12003.832329] CPU2: Package power limit normal [12003.832332] CPU3: Package power limit normal [12003.832334] CPU1: Package power limit normal [12475.122482] cfg80211: Found new beacon on frequency: 5765 MHz (Ch 153) on phy0 [12689.588473] CPU2: Package power limit notification (total events = 73627) [12689.588479] CPU3: Package power limit notification (total events = 73633) [12689.588483] CPU1: Package power limit notification (total events = 73911) [12689.588488] CPU0: Package power limit notification (total events = 73910) [12689.589149] CPU2: Package power limit normal [12689.589152] CPU0: Package power limit normal [12689.589154] CPU1: Package power limit normal [12689.589156] CPU3: Package power limit normal [13132.666289] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [13132.666308] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [13132.666321] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [13132.666383] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [13132.666424] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [13132.666489] e1000e 0000:00:19.0: PME# disabled [13132.666663] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [13132.727806] CPU1: Package power limit notification (total events = 74039) [13132.727812] CPU2: Package power limit notification (total events = 73753) [13132.727815] CPU0: Package power limit notification (total events = 74038) [13132.727818] CPU3: Package power limit notification (total events = 73759) [13132.730826] CPU2: Package power limit normal [13132.730829] CPU1: Package power limit normal [13132.730831] CPU3: Package power limit normal [13132.730834] CPU0: Package power limit normal [13132.921962] e1000e 0000:00:19.0: PME# enabled [13133.363123] wlan0: deauthenticating from 00:26:cb:c6:e1:70 by local choice (reason=3) [13133.397484] cfg80211: All devices are disconnected, going to restore regulatory settings [13133.397497] cfg80211: Restoring regulatory settings [13133.397548] cfg80211: Calling CRDA to update world regulatory domain [13133.556114] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [13133.556119] cfg80211: World regulatory domain updated: [13133.556122] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [13133.556126] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13133.556129] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [13133.556132] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [13133.556135] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13133.556138] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13134.398365] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [13134.398383] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [13134.398396] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [13134.398431] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [13134.398472] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [13134.398563] e1000e 0000:00:19.0: PME# disabled [13139.787273] PM: Syncing filesystems ... done. [13139.856009] PM: Preparing system for mem sleep [13140.604348] Freezing user space processes ... (elapsed 0.01 seconds) done. [13140.620307] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [13140.636280] PM: Entering mem sleep [13140.636350] Suspending console(s) (use no_console_suspend to debug) [13140.636597] sd 0:0:0:0: [sda] Synchronizing SCSI cache [13140.636779] sd 0:0:0:0: [sda] Stopping disk [13140.839764] PM: suspend of drv:tpm_tis dev:00:0a complete after 191.574 msecs [13140.839999] ehci_hcd 0000:00:1d.0: PCI INT A disabled [13140.840058] ehci_hcd 0000:00:1a.0: PCI INT A disabled [13140.841024] sdhci-pci 0000:0d:00.0: PCI INT A disabled [13140.847682] ACPI handle has no context! [13140.863721] i915 0000:00:02.0: power state changed by ACPI to D3 [13140.937401] e1000e 0000:00:19.0: PME# enabled [13140.937411] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [13140.943878] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [13140.951479] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 111.658 msecs [13140.959456] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.711 msecs [13141.102618] PM: suspend of drv:sd dev:0:0:0:0 complete after 467.072 msecs [13141.102662] PM: suspend of drv:scsi dev:target0:0:0 complete after 467.098 msecs [13141.102692] PM: suspend of drv:scsi dev:host0 complete after 455.104 msecs [13141.123099] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 283.783 msecs [13141.123177] PM: suspend of drv: dev:pci0000:00 complete after 276.061 msecs [13141.123188] PM: suspend of devices complete after 487.855 msecs [13141.123191] PM: suspend devices took 0.488 seconds [13141.139191] ehci_hcd 0000:00:1d.0: PME# enabled [13141.139197] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [13141.155032] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [13141.155258] ehci_hcd 0000:00:1a.0: PME# enabled [13141.155263] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [13141.170995] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [13141.187016] PM: late suspend of devices complete after 63.965 msecs [13141.187185] ACPI: Preparing to enter system sleep state S3 [13141.358633] PM: Saving platform NVS memory [13141.361587] Disabling non-boot CPUs ... [13141.363195] CPU 1 is now offline [13141.466290] CPU 2 is now offline [13141.570055] CPU 3 is now offline [13141.570398] Extended CMOS year: 2000 [13141.570652] ACPI: Low-level resume complete [13141.570726] PM: Restoring platform NVS memory [13141.572756] Extended CMOS year: 2000 [13141.572896] Enabling non-boot CPUs ... [13141.573001] Booting Node 0 Processor 1 APIC 0x1 [13141.573002] smpboot cpu 1: start_ip = 98000 [13141.583910] Calibrating delay loop (skipped) already calibrated this CPU [13141.583924] Disabled fast string operations [13141.604237] NMI watchdog enabled, takes one hw-pmu counter. [13141.636444] CPU1 is up [13141.636594] Booting Node 0 Processor 2 APIC 0x2 [13141.636595] smpboot cpu 2: start_ip = 98000 [13141.647500] Calibrating delay loop (skipped) already calibrated this CPU [13141.647512] Disabled fast string operations [13141.667862] NMI watchdog enabled, takes one hw-pmu counter. [13141.696237] CPU2 is up [13141.696310] Booting Node 0 Processor 3 APIC 0x3 [13141.696311] smpboot cpu 3: start_ip = 98000 [13141.707214] Calibrating delay loop (skipped) already calibrated this CPU [13141.707226] Disabled fast string operations [13141.727658] NMI watchdog enabled, takes one hw-pmu counter. [13141.756201] CPU3 is up [13141.759758] ACPI: Waking up from system sleep state S3 [13142.079382] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [13142.079389] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [13142.079408] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [13142.079421] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xf1525004) [13142.079427] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [13142.079445] serial 0000:00:16.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [13142.079457] serial 0000:00:16.3: restoring config space at offset 0x5 (was 0x0, writing 0xf152c000) [13142.079461] serial 0000:00:16.3: restoring config space at offset 0x4 (was 0x1, writing 0x40b1) [13142.079467] serial 0000:00:16.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [13142.079486] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [13142.079497] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x4081) [13142.079505] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [13142.079528] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [13142.079542] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf152a000) [13142.079549] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [13142.079569] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [13142.079574] ehci_hcd 0000:00:1a.0: PME# disabled [13142.079577] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [13142.079580] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [13142.079595] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [13142.079608] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1520004) [13142.079612] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [13142.079617] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [13142.079651] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [13142.079665] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [13142.079670] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [13142.079675] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [13142.079685] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [13142.079692] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [13142.079739] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [13142.079752] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [13142.079758] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf140f140) [13142.079763] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [13142.079773] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [13142.079780] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [13142.079829] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [13142.079842] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xf0b1f041) [13142.079847] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf130f0c0) [13142.079852] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [13142.079862] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [13142.079869] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [13142.079906] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [13142.079920] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf1529000) [13142.079927] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [13142.079942] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [13142.079946] ehci_hcd 0000:00:1d.0: PME# disabled [13142.079948] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [13142.079951] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [13142.080010] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [13142.080140] iwlwifi 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [13142.080213] iwlwifi 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1400004) [13142.080248] iwlwifi 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [13142.080278] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [13142.080475] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [13142.080504] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0c00000) [13142.080510] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [13142.080516] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x2 (was 0x8050104, writing 0x8050107) [13142.080522] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [13142.080528] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x0 (was 0xe8231180, writing 0xe8221180) [13142.080564] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [13142.080639] PM: early resume of devices complete after 1.301 msecs [13142.080708] i915 0000:00:02.0: power state changed by ACPI to D0 [13142.080712] i915 0000:00:02.0: power state changed by ACPI to D0 [13142.080717] i915 0000:00:02.0: setting latency timer to 64 [13142.080737] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [13142.080741] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [13142.080743] e1000e 0000:00:19.0: PME# disabled [13142.080746] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [13142.080755] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [13142.080764] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [13142.080775] mei 0000:00:16.0: irq 43 for MSI/MSI-X [13142.080789] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [13142.080797] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [13142.080838] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [13142.080849] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [13142.080851] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [13142.080855] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [13142.080861] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [13142.080867] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [13142.080937] ahci 0000:00:1f.2: setting latency timer to 64 [13142.080952] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [13142.081068] sd 0:0:0:0: [sda] Starting disk [13142.182483] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 101.977 msecs [13142.184307] watchdog: only one watchdog can use /dev/watchdog. [13142.184309] watchdog: error registering /dev/watchdog (err=-16). [13142.184310] mei: unable to register watchdog device. [13142.258912] PM: resume of drv: dev:ep_00 complete after 178.136 msecs [13142.258954] PM: resume of drv:hub dev:1-1:1.0 complete after 178.232 msecs [13142.258962] PM: resume of drv: dev:ep_81 complete after 178.220 msecs [13142.330943] usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd [13142.398577] ata5: SATA link down (SStatus 0 SControl 300) [13142.414538] ata2: SATA link down (SStatus 0 SControl 300) [13142.432922] PM: resume of drv: dev:ep_00 complete after 352.413 msecs [13142.432925] PM: resume of drv:uvcvideo dev:1-1.6:1.1 complete after 352.429 msecs [13142.432929] PM: resume of drv:uvcvideo dev:1-1.6:1.0 complete after 352.468 msecs [13142.432964] PM: resume of drv: dev:ep_81 complete after 352.487 msecs [13142.463076] PM: resume of drv:i915 dev:0000:00:02.0 complete after 383.249 msecs [13142.582156] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [13142.582220] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.418 msecs [13144.034854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [13144.036050] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [13144.036061] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [13144.036068] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [13144.038352] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [13144.038362] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [13144.038369] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [13144.039357] ata1.00: configured for UDMA/100 [13144.068961] PM: resume of drv:sd dev:0:0:0:0 complete after 1992.392 msecs [13144.069026] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1953.185 msecs [13144.069036] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1992.464 msecs [13144.069777] PM: resume of devices complete after 1993.625 msecs [13144.069839] PM: resume devices took 1.992 seconds [13144.069916] PM: Finishing wakeup. [13144.069916] Restarting tasks ... done. [13144.087418] video LNXVIDEO:00: Restoring backlight state [13144.200212] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [13144.615100] init: anacron main process (16070) killed by TERM signal [13144.672002] e1000e 0000:00:19.0: PME# enabled [13144.797053] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [13144.797062] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [13144.797070] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [13144.797101] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [13144.797118] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [13144.797162] e1000e 0000:00:19.0: PME# disabled [13144.921006] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [13144.976843] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [13144.977771] ADDRCONF(NETDEV_UP): eth0: link is not ready [13144.979888] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [13144.980173] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [13145.109297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [13146.194036] e1000e 0000:00:19.0: PME# enabled [13147.977963] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [13150.796734] wlan0: authenticate with 00:27:0d:71:93:00 (try 1) [13150.995000] wlan0: authenticate with 00:27:0d:71:93:00 (try 2) [13150.996109] wlan0: authenticated [13151.031969] wlan0: waiting for beacon from 00:27:0d:71:93:00 [13151.058161] wlan0: beacon received [13151.098747] wlan0: associate with 00:27:0d:71:93:00 (try 1) [13151.102353] wlan0: RX AssocResp from 00:27:0d:71:93:00 (capab=0x421 status=0 aid=31) [13151.102355] wlan0: associated [13151.105729] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [13151.105800] cfg80211: Calling CRDA for country: US [13151.109059] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [13151.109062] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109064] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [13151.109066] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109067] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [13151.109069] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109070] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [13151.109072] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109073] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [13151.109075] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109076] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [13151.109078] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109079] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [13151.109081] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109082] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [13151.109084] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109085] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [13151.109086] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109088] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [13151.109089] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109091] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [13151.109092] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109093] cfg80211: Disabling freq 2467 MHz [13151.109094] cfg80211: Disabling freq 2472 MHz [13151.109096] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [13151.109097] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [13151.109098] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [13151.109100] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [13151.109101] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [13151.109103] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [13151.109104] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [13151.109106] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [13151.109107] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [13151.109109] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109110] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [13151.109112] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109113] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [13151.109115] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109116] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [13151.109117] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109119] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [13151.109120] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109122] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [13151.109123] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109125] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [13151.109126] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109127] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [13151.109129] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109130] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [13151.109132] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109133] cfg80211: Disabling freq 5600 MHz [13151.109134] cfg80211: Disabling freq 5620 MHz [13151.109135] cfg80211: Disabling freq 5640 MHz [13151.109136] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [13151.109138] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109139] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [13151.109140] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109142] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [13151.109143] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109145] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [13151.109146] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [13151.109148] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [13151.109149] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [13151.109150] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [13151.109152] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [13151.109153] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [13151.109155] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [13151.109156] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [13151.109158] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [13151.109161] cfg80211: Regulatory domain changed to country: US [13151.109162] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [13151.109164] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [13151.109165] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [13151.109166] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109168] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109169] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13151.109170] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [13161.670785] wlan0: no IPv6 routers present [13167.717854] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [13167.850449] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [13170.353380] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [13170.559780] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [13445.711384] CPU2: Package power limit notification (total events = 73788) [13445.711390] CPU1: Package power limit notification (total events = 74074) [13445.711394] CPU3: Package power limit notification (total events = 73794) [13445.711397] CPU0: Package power limit notification (total events = 74073) [13445.712010] CPU1: Package power limit normal [13445.712013] CPU2: Package power limit normal [13445.712015] CPU0: Package power limit normal [13445.712017] CPU3: Package power limit normal [13448.285645] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [13747.809106] CPU2: Package power limit notification (total events = 73894) [13747.809110] CPU3: Package power limit notification (total events = 73900) [13747.809114] CPU1: Package power limit notification (total events = 74181) [13747.809116] CPU0: Package power limit notification (total events = 74180) [13747.809204] CPU3: Package power limit normal [13747.809206] CPU2: Package power limit normal [13747.809208] CPU1: Package power limit normal [13747.809209] CPU0: Package power limit normal [14173.742657] CPU0: Package power limit notification (total events = 74305) [14173.742662] CPU3: Package power limit notification (total events = 74024) [14173.742665] CPU2: Package power limit notification (total events = 74018) [14173.742668] CPU1: Package power limit notification (total events = 74306) [14173.743159] CPU0: Package power limit normal [14173.743170] CPU2: Package power limit normal [14173.743177] CPU1: Package power limit normal [14173.743184] CPU3: Package power limit normal [14522.950343] CPU2: Package power limit notification (total events = 74260) [14522.950348] CPU0: Package power limit notification (total events = 74548) [14522.950351] CPU3: Package power limit notification (total events = 74266) [14522.950354] CPU1: Package power limit notification (total events = 74549) [14522.952329] CPU2: Package power limit normal [14522.952332] CPU1: Package power limit normal [14522.952335] CPU3: Package power limit normal [14522.952337] CPU0: Package power limit normal [14829.210115] CPU2: Package power limit notification (total events = 74604) [14829.210120] CPU0: Package power limit notification (total events = 74894) [14829.210123] CPU1: Package power limit notification (total events = 74895) [14829.210125] CPU3: Package power limit notification (total events = 74610) [14829.213707] CPU3: Package power limit normal [14829.213709] CPU2: Package power limit normal [14829.213722] CPU1: Package power limit normal [14829.213724] CPU0: Package power limit normal [14956.883948] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [14956.982395] scsi7 : usb-storage 2-1.2:1.0 [14957.978783] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 CCS [14957.981691] sd 7:0:0:0: Attached scsi generic sg1 type 0 [14957.985757] sd 7:0:0:0: [sdb] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB) [14957.986250] sd 7:0:0:0: [sdb] Write Protect is off [14957.986258] sd 7:0:0:0: [sdb] Mode Sense: 4b 00 00 08 [14957.986753] sd 7:0:0:0: [sdb] No Caching mode page present [14957.986763] sd 7:0:0:0: [sdb] Assuming drive cache: write through [14957.989506] sd 7:0:0:0: [sdb] No Caching mode page present [14957.989520] sd 7:0:0:0: [sdb] Assuming drive cache: write through [14957.991026] sdb: sdb1 [14957.993315] sd 7:0:0:0: [sdb] No Caching mode page present [14957.993328] sd 7:0:0:0: [sdb] Assuming drive cache: write through [14957.993339] sd 7:0:0:0: [sdb] Attached SCSI removable disk [14967.187608] EXT4-fs (dm-1): recovery complete [14967.196017] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [15130.823377] CPU3: Package power limit notification (total events = 74953) [15130.823381] CPU0: Package power limit notification (total events = 75237) [15130.823384] CPU1: Package power limit notification (total events = 75238) [15130.823387] CPU2: Package power limit notification (total events = 74947) [15130.834395] CPU1: Package power limit normal [15130.834398] CPU0: Package power limit normal [15130.834425] CPU2: Package power limit normal [15130.834428] CPU3: Package power limit normal [15430.172414] CPU3: Package power limit notification (total events = 75218) [15430.172420] CPU1: Package power limit notification (total events = 75502) [15430.172423] CPU2: Package power limit notification (total events = 75212) [15430.172426] CPU0: Package power limit notification (total events = 75501) [15430.173808] CPU2: Package power limit normal [15430.173811] CPU3: Package power limit normal [15430.173813] CPU1: Package power limit normal [15430.173815] CPU0: Package power limit normal [15743.349947] CPU1: Package power limit notification (total events = 75758) [15743.349951] CPU0: Package power limit notification (total events = 75757) [15743.349955] CPU3: Package power limit notification (total events = 75474) [15743.349958] CPU2: Package power limit notification (total events = 75468) [15743.351017] CPU3: Package power limit normal [15743.351020] CPU0: Package power limit normal [15743.351022] CPU1: Package power limit normal [15743.351024] CPU2: Package power limit normal [16063.307108] CPU2: Package power limit notification (total events = 75533) [16063.307114] CPU3: Package power limit notification (total events = 75539) [16063.307118] CPU1: Package power limit notification (total events = 75823) [16063.307121] CPU0: Package power limit notification (total events = 75822) [16063.307805] CPU2: Package power limit normal [16063.307808] CPU0: Package power limit normal [16063.307810] CPU1: Package power limit normal [16063.307812] CPU3: Package power limit normal [16389.751584] CPU1: Package power limit notification (total events = 75935) [16389.751591] CPU2: Package power limit notification (total events = 75645) [16389.751595] CPU3: Package power limit notification (total events = 75651) [16389.751598] CPU0: Package power limit notification (total events = 75934) [16389.753253] CPU2: Package power limit normal [16389.753255] CPU3: Package power limit normal [16389.753258] CPU1: Package power limit normal [16389.753261] CPU0: Package power limit normal [16773.390859] CPU1: Package power limit notification (total events = 75953) [16773.390865] CPU2: Package power limit notification (total events = 75663) [16773.390868] CPU3: Package power limit notification (total events = 75669) [16773.390871] CPU0: Package power limit notification (total events = 75952) [16773.394184] CPU1: Package power limit normal [16773.394187] CPU2: Package power limit normal [16773.394189] CPU3: Package power limit normal [16773.394191] CPU0: Package power limit normal [17129.653473] CPU0: Package power limit notification (total events = 75971) [17129.653478] CPU3: Package power limit notification (total events = 75688) [17129.653481] CPU1: Package power limit notification (total events = 75972) [17129.653484] CPU2: Package power limit notification (total events = 75682) [17129.654752] CPU0: Package power limit normal [17129.654755] CPU3: Package power limit normal [17129.654757] CPU1: Package power limit normal [17129.654759] CPU2: Package power limit normal [17434.115501] CPU3: Package power limit notification (total events = 75736) [17434.115506] CPU2: Package power limit notification (total events = 75730) [17434.115510] CPU1: Package power limit notification (total events = 76020) [17434.115513] CPU0: Package power limit notification (total events = 76019) [17434.116891] CPU1: Package power limit normal [17434.116894] CPU2: Package power limit normal [17434.116897] CPU3: Package power limit normal [17434.116899] CPU0: Package power limit normal [17741.975842] CPU0: Package power limit notification (total events = 76047) [17741.975848] CPU3: Package power limit notification (total events = 75764) [17741.975851] CPU1: Package power limit notification (total events = 76048) [17741.975854] CPU2: Package power limit notification (total events = 75758) [17741.976688] CPU0: Package power limit normal [17741.976691] CPU1: Package power limit normal [17741.976694] CPU3: Package power limit normal [17741.976696] CPU2: Package power limit normal [18227.017031] CPU3: Package power limit notification (total events = 75770) [18227.017035] CPU2: Package power limit notification (total events = 75764) [18227.017038] CPU1: Package power limit notification (total events = 76054) [18227.017041] CPU0: Package power limit notification (total events = 76053) [18227.017496] CPU1: Package power limit normal [18227.017499] CPU3: Package power limit normal [18227.017501] CPU0: Package power limit normal [18227.017503] CPU2: Package power limit normal [18819.475066] CPU2: Package power limit notification (total events = 75770) [18819.475070] CPU3: Package power limit notification (total events = 75776) [18819.475074] CPU1: Package power limit notification (total events = 76060) [18819.475076] CPU0: Package power limit notification (total events = 76059) [18819.476506] CPU1: Package power limit normal [18819.476509] CPU2: Package power limit normal [18819.476510] CPU3: Package power limit normal [18819.476512] CPU0: Package power limit normal [19157.938266] CPU0: Package power limit notification (total events = 76068) [19157.938270] CPU2: Package power limit notification (total events = 75779) [19157.938274] CPU1: Package power limit notification (total events = 76069) [19157.938277] CPU3: Package power limit notification (total events = 75785) [19157.939368] CPU1: Package power limit normal [19157.939370] CPU2: Package power limit normal [19157.939372] CPU0: Package power limit normal [19157.939374] CPU3: Package power limit normal [19472.298974] CPU1: Package power limit notification (total events = 76082) [19472.298978] CPU0: Package power limit notification (total events = 76081) [19472.298982] CPU2: Package power limit notification (total events = 75792) [19472.298986] CPU3: Package power limit notification (total events = 75798) [19472.301547] CPU0: Package power limit normal [19472.301550] CPU1: Package power limit normal [19472.301553] CPU3: Package power limit normal [19472.301556] CPU2: Package power limit normal [19806.346876] CPU2: Package power limit notification (total events = 75811) [19806.346880] CPU3: Package power limit notification (total events = 75817) [19806.346883] CPU0: Package power limit notification (total events = 76100) [19806.346886] CPU1: Package power limit notification (total events = 76101) [19806.347208] CPU2: Package power limit normal [19806.347210] CPU1: Package power limit normal [19806.347212] CPU0: Package power limit normal [19806.347214] CPU3: Package power limit normal [19978.454458] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [19978.454461] thinkpad_acpi: unhandled HKEY event 0x6040 [19978.454463] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [19978.454917] thinkpad_acpi: EC reports that Thermal Table has changed [19978.837492] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [19978.837510] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [19978.837525] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [19978.837594] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [19978.837643] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [19978.837708] e1000e 0000:00:19.0: PME# disabled [19978.837861] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [25763.189877] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [25763.189880] thinkpad_acpi: unhandled HKEY event 0x6040 [25763.189882] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [25763.190324] thinkpad_acpi: EC reports that Thermal Table has changed [25765.358019] e1000e 0000:00:19.0: PME# enabled [25767.781904] CPU1: Package power limit notification (total events = 76118) [25767.781909] CPU0: Package power limit notification (total events = 76117) [25767.781913] CPU3: Package power limit notification (total events = 75834) [25767.781916] CPU2: Package power limit notification (total events = 75828) [25767.783677] CPU1: Package power limit normal [25767.783679] CPU0: Package power limit normal [25767.783682] CPU3: Package power limit normal [25767.783684] CPU2: Package power limit normal [25977.587661] usb 2-1.1: new low-speed USB device number 5 using ehci_hcd [25978.031378] input: Yubico Yubico Yubikey II as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input11 [25978.031494] generic-usb 0003:1050:0010.0001: input,hidraw0: USB HID v1.11 Keyboard [Yubico Yubico Yubikey II] on usb-0000:00:1d.0-1.1/input0 [25978.031516] usbcore: registered new interface driver usbhid [25978.031518] usbhid: USB HID core driver [25990.926990] usb 2-1.1: USB disconnect, device number 5 [26098.506548] CPU1: Package power limit notification (total events = 76427) [26098.506552] CPU0: Package power limit notification (total events = 76426) [26098.506556] CPU2: Package power limit notification (total events = 76135) [26098.506559] CPU3: Package power limit notification (total events = 76141) [26098.517541] CPU3: Package power limit normal [26098.517543] CPU2: Package power limit normal [26098.517565] CPU1: Package power limit normal [26098.517568] CPU0: Package power limit normal [26496.940270] CPU0: Package power limit notification (total events = 76440) [26496.940274] CPU1: Package power limit notification (total events = 76441) [26496.940278] CPU3: Package power limit notification (total events = 76155) [26496.940281] CPU2: Package power limit notification (total events = 76149) [26496.941612] CPU1: Package power limit normal [26496.941616] CPU2: Package power limit normal [26496.941618] CPU0: Package power limit normal [26496.941620] CPU3: Package power limit normal [26577.562816] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [26577.562823] thinkpad_acpi: unhandled HKEY event 0x6040 [26577.562826] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [26577.563446] thinkpad_acpi: EC reports that Thermal Table has changed [26577.654454] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [26577.654472] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [26577.654485] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [26577.654520] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [26577.654561] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [26577.654623] e1000e 0000:00:19.0: PME# disabled [26577.654772] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [28654.176307] usb 2-1.2: USB disconnect, device number 4 [31697.539020] CPU2: Package power limit notification (total events = 76156) [31697.539026] CPU1: Package power limit notification (total events = 76448) [31697.539029] CPU3: Package power limit notification (total events = 76162) [31697.539031] CPU0: Package power limit notification (total events = 76447) [31697.552023] CPU1: Package power limit normal [31697.552026] CPU0: Package power limit normal [31697.552029] CPU3: Package power limit normal [31697.552032] CPU2: Package power limit normal [31697.629744] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [31697.629747] thinkpad_acpi: unhandled HKEY event 0x6040 [31697.629749] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [31697.630220] thinkpad_acpi: EC reports that Thermal Table has changed [31699.043429] e1000e 0000:00:19.0: PME# enabled [31997.168354] CPU2: Package power limit notification (total events = 77052) [31997.168361] CPU0: Package power limit notification (total events = 77356) [31997.168364] CPU3: Package power limit notification (total events = 77058) [31997.168379] CPU1: Package power limit notification (total events = 77357) [31997.179344] CPU2: Package power limit normal [31997.179347] CPU3: Package power limit normal [31997.179369] CPU1: Package power limit normal [31997.179371] CPU0: Package power limit normal [32297.087961] CPU1: Package power limit notification (total events = 78183) [32297.087968] CPU3: Package power limit notification (total events = 77875) [32297.087971] CPU2: Package power limit notification (total events = 77869) [32297.087974] CPU0: Package power limit notification (total events = 78182) [32297.089367] CPU3: Package power limit normal [32297.089370] CPU1: Package power limit normal [32297.089372] CPU0: Package power limit normal [32297.089374] CPU2: Package power limit normal [32297.674062] cfg80211: All devices are disconnected, going to restore regulatory settings [32297.674078] cfg80211: Restoring regulatory settings [32297.674090] cfg80211: Calling CRDA to update world regulatory domain [32297.802818] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [32297.802822] cfg80211: World regulatory domain updated: [32297.802824] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [32297.802827] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32297.802828] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [32297.802830] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [32297.802831] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32297.802833] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32299.884382] cfg80211: Found new beacon on frequency: 5765 MHz (Ch 153) on phy0 [32300.225953] cfg80211: Found new beacon on frequency: 5825 MHz (Ch 165) on phy0 [32300.281547] wlan0: authenticate with 00:26:cb:c6:e0:b0 (try 1) [32300.478301] wlan0: authenticate with 00:26:cb:c6:e0:b0 (try 2) [32300.485350] wlan0: authenticated [32300.526533] wlan0: waiting for beacon from 00:26:cb:c6:e0:b0 [32308.094398] wlan0: authenticate with 64:a0:e7:29:29:30 (try 1) [32308.096813] wlan0: authenticated [32308.135639] wlan0: waiting for beacon from 64:a0:e7:29:29:30 [32313.250348] ADDRCONF(NETDEV_UP): wlan0: link is not ready [32316.424729] wlan0: authenticate with 64:a0:e7:29:29:30 (try 1) [32316.426173] wlan0: authenticated [32316.462124] wlan0: waiting for beacon from 64:a0:e7:29:29:30 [32323.824717] wlan0: authenticate with 64:a0:e7:29:29:30 (try 1) [32323.826334] wlan0: authenticated [32323.863786] wlan0: waiting for beacon from 64:a0:e7:29:29:30 [32323.898848] wlan0: beacon received [32323.913160] wlan0: associate with 64:a0:e7:29:29:30 (try 1) [32323.914990] wlan0: RX ReassocResp from 64:a0:e7:29:29:30 (capab=0x421 status=0 aid=54) [32323.914994] wlan0: associated [32323.918528] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [32323.918593] cfg80211: Calling CRDA for country: US [32323.921564] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [32323.921567] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921569] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [32323.921570] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921572] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [32323.921573] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921575] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [32323.921577] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921578] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [32323.921579] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921581] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [32323.921582] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921584] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [32323.921585] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921587] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [32323.921588] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921590] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [32323.921591] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921593] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [32323.921594] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921596] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [32323.921597] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921599] cfg80211: Disabling freq 2467 MHz [32323.921600] cfg80211: Disabling freq 2472 MHz [32323.921601] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [32323.921602] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [32323.921604] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [32323.921605] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [32323.921607] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [32323.921608] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [32323.921610] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [32323.921611] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [32323.921613] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [32323.921614] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921616] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [32323.921617] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921619] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [32323.921620] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921622] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [32323.921623] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921625] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [32323.921626] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921628] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [32323.921629] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921631] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [32323.921632] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921634] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [32323.921635] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921637] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [32323.921638] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921639] cfg80211: Disabling freq 5600 MHz [32323.921640] cfg80211: Disabling freq 5620 MHz [32323.921641] cfg80211: Disabling freq 5640 MHz [32323.921642] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [32323.921644] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921645] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [32323.921647] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921648] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [32323.921650] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921651] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [32323.921653] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [32323.921654] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [32323.921656] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [32323.921657] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [32323.921659] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [32323.921660] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [32323.921662] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [32323.921663] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [32323.921665] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [32323.921668] cfg80211: Regulatory domain changed to country: US [32323.921669] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [32323.921671] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [32323.921672] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [32323.921673] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921675] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921676] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [32323.921678] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [32334.872375] wlan0: no IPv6 routers present [32363.899672] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [32363.958709] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [32366.270972] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [32366.431866] cfg80211: Found new beacon on frequency: 5765 MHz (Ch 153) on phy0 [32366.806795] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [32406.730804] cfg80211: Found new beacon on frequency: 5825 MHz (Ch 165) on phy0 [32650.664913] CPU3: Package power limit notification (total events = 78716) [32650.664918] CPU2: Package power limit notification (total events = 78709) [32650.664922] CPU0: Package power limit notification (total events = 79029) [32650.664925] CPU1: Package power limit notification (total events = 79030) [32650.665623] CPU2: Package power limit normal [32650.665625] CPU3: Package power limit normal [32650.665627] CPU1: Package power limit normal [32650.665630] CPU0: Package power limit normal [32962.176834] CPU2: Package power limit notification (total events = 79040) [32962.176839] CPU1: Package power limit notification (total events = 79361) [32962.176843] CPU3: Package power limit notification (total events = 79047) [32962.176846] CPU0: Package power limit notification (total events = 79360) [32962.177576] CPU1: Package power limit normal [32962.177579] CPU3: Package power limit normal [32962.177581] CPU2: Package power limit normal [32962.177583] CPU0: Package power limit normal [33125.065230] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [33457.704278] CPU2: Package power limit notification (total events = 79073) [33457.704284] CPU3: Package power limit notification (total events = 79080) [33457.704287] CPU1: Package power limit notification (total events = 79395) [33457.704290] CPU0: Package power limit notification (total events = 79394) [33457.705315] CPU3: Package power limit normal [33457.705323] CPU2: Package power limit normal [33457.705335] CPU1: Package power limit normal [33457.705344] CPU0: Package power limit normal [33758.671873] CPU2: Package power limit notification (total events = 79353) [33758.671878] CPU3: Package power limit notification (total events = 79360) [33758.671881] CPU1: Package power limit notification (total events = 79675) [33758.671884] CPU0: Package power limit notification (total events = 79674) [33758.684874] CPU2: Package power limit normal [33758.684877] CPU3: Package power limit normal [33758.684881] CPU1: Package power limit normal [33758.684884] CPU0: Package power limit normal [34062.982782] CPU1: Package power limit notification (total events = 79742) [34062.982788] CPU3: Package power limit notification (total events = 79428) [34062.982791] CPU2: Package power limit notification (total events = 79421) [34062.982794] CPU0: Package power limit notification (total events = 79741) [34062.983187] CPU1: Package power limit normal [34062.983189] CPU3: Package power limit normal [34062.983191] CPU2: Package power limit normal [34062.983193] CPU0: Package power limit normal [34362.885377] CPU1: Package power limit notification (total events = 80596) [34362.885382] CPU3: Package power limit notification (total events = 80278) [34362.885385] CPU2: Package power limit notification (total events = 80271) [34362.885389] CPU0: Package power limit notification (total events = 80595) [34362.887795] CPU3: Package power limit normal [34362.887798] CPU1: Package power limit normal [34362.887800] CPU2: Package power limit normal [34362.887802] CPU0: Package power limit normal [34662.639800] CPU2: Package power limit notification (total events = 81688) [34662.639805] CPU1: Package power limit notification (total events = 82021) [34662.639808] CPU3: Package power limit notification (total events = 81695) [34662.639813] CPU0: Package power limit notification (total events = 82019) [34662.652813] CPU0: Package power limit normal [34662.652816] CPU2: Package power limit normal [34662.652819] CPU1: Package power limit normal [34662.652824] CPU3: Package power limit normal [34963.325155] CPU2: Package power limit notification (total events = 82468) [34963.325161] CPU3: Package power limit notification (total events = 82475) [34963.325164] CPU1: Package power limit notification (total events = 82804) [34963.325168] CPU0: Package power limit notification (total events = 82802) [34963.326971] CPU0: Package power limit normal [34963.326974] CPU2: Package power limit normal [34963.326976] CPU1: Package power limit normal [34963.326978] CPU3: Package power limit normal [35268.655017] CPU0: Package power limit notification (total events = 83103) [35268.655022] CPU1: Package power limit notification (total events = 83105) [35268.655026] CPU3: Package power limit notification (total events = 82777) [35268.655029] CPU2: Package power limit notification (total events = 82770) [35268.668056] CPU2: Package power limit normal [35268.668060] CPU0: Package power limit normal [35268.668063] CPU3: Package power limit normal [35268.668066] CPU1: Package power limit normal [35569.067145] CPU1: Package power limit notification (total events = 83553) [35569.067151] CPU3: Package power limit notification (total events = 83224) [35569.067154] CPU2: Package power limit notification (total events = 83217) [35569.067158] CPU0: Package power limit notification (total events = 83551) [35569.078146] CPU3: Package power limit normal [35569.078150] CPU1: Package power limit normal [35569.078152] CPU2: Package power limit normal [35569.078155] CPU0: Package power limit normal [35868.565322] CPU3: Package power limit notification (total events = 83853) [35868.565328] CPU2: Package power limit notification (total events = 83846) [35868.565332] CPU0: Package power limit notification (total events = 84181) [35868.565336] CPU1: Package power limit notification (total events = 84183) [35868.567407] CPU2: Package power limit normal [35868.567410] CPU3: Package power limit normal [35868.567413] CPU1: Package power limit normal [35868.567416] CPU0: Package power limit normal [35874.968021] cfg80211: All devices are disconnected, going to restore regulatory settings [35874.968026] cfg80211: Restoring regulatory settings [35874.968031] cfg80211: Calling CRDA to update world regulatory domain [35875.022526] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [35875.022530] cfg80211: World regulatory domain updated: [35875.022531] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [35875.022533] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35875.022535] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [35875.022537] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [35875.022539] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35875.022541] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.446574] wlan0: authenticate with 64:a0:e7:29:29:30 (try 1) [35877.448204] wlan0: authenticated [35877.450318] wlan0: associate with 64:a0:e7:29:29:30 (try 1) [35877.452953] wlan0: RX ReassocResp from 64:a0:e7:29:29:30 (capab=0x421 status=0 aid=54) [35877.452965] wlan0: associated [35877.458947] cfg80211: Calling CRDA for country: US [35877.464621] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [35877.464625] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464627] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [35877.464629] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464631] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [35877.464633] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464634] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [35877.464636] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464638] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [35877.464640] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464642] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [35877.464644] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464645] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [35877.464647] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464649] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [35877.464651] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464653] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [35877.464655] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464657] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [35877.464659] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464661] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [35877.464663] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464665] cfg80211: Disabling freq 2467 MHz [35877.464666] cfg80211: Disabling freq 2472 MHz [35877.464667] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [35877.464670] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [35877.464671] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [35877.464674] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [35877.464675] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [35877.464678] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [35877.464679] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [35877.464681] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [35877.464683] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [35877.464685] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464686] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [35877.464688] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464690] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [35877.464692] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464694] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [35877.464696] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464698] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [35877.464700] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464702] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [35877.464703] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464705] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [35877.464707] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464709] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [35877.464711] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464714] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [35877.464716] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464718] cfg80211: Disabling freq 5600 MHz [35877.464720] cfg80211: Disabling freq 5620 MHz [35877.464721] cfg80211: Disabling freq 5640 MHz [35877.464722] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [35877.464725] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464727] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [35877.464729] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464730] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [35877.464733] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464735] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [35877.464736] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [35877.464738] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [35877.464739] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [35877.464740] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [35877.464742] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [35877.464743] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [35877.464745] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [35877.464746] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [35877.464748] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [35877.464751] cfg80211: Regulatory domain changed to country: US [35877.464753] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [35877.464754] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [35877.464756] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [35877.464757] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464758] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464760] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [35877.464761] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [35995.891927] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [35996.002013] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [35998.396451] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [35998.452471] cfg80211: Found new beacon on frequency: 5765 MHz (Ch 153) on phy0 [35998.621180] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [35998.711864] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [35998.927723] cfg80211: Found new beacon on frequency: 5825 MHz (Ch 165) on phy0 [36115.329078] cfg80211: Found new beacon on frequency: 5200 MHz (Ch 40) on phy0 [36238.582094] wlan0: authenticate with 68:bc:0c:cb:9e:f0 (try 1) [36238.583662] wlan0: authenticated [36238.682374] wlan0: associate with 68:bc:0c:cb:9e:f0 (try 1) [36238.684306] wlan0: RX ReassocResp from 68:bc:0c:cb:9e:f0 (capab=0x421 status=0 aid=5) [36238.684315] wlan0: associated [36402.844575] CPU2: Package power limit notification (total events = 84348) [36402.844580] CPU3: Package power limit notification (total events = 84356) [36402.844584] CPU0: Package power limit notification (total events = 84691) [36402.844587] CPU1: Package power limit notification (total events = 84693) [36402.844805] CPU2: Package power limit normal [36402.844808] CPU3: Package power limit normal [36402.844810] CPU1: Package power limit normal [36402.844812] CPU0: Package power limit normal [36478.045267] wlan0: authenticate with 00:26:cb:c6:e0:b0 (try 1) [36478.046601] wlan0: authenticated [36478.131816] wlan0: waiting for beacon from 00:26:cb:c6:e0:b0 [36478.197757] wlan0: beacon received [36478.199636] wlan0: associate with 00:26:cb:c6:e0:b0 (try 1) [36478.201676] wlan0: RX ReassocResp from 00:26:cb:c6:e0:b0 (capab=0x421 status=0 aid=6) [36478.201688] wlan0: associated [36749.385641] CPU0: Package power limit notification (total events = 84692) [36749.385646] CPU3: Package power limit notification (total events = 84357) [36749.385649] CPU1: Package power limit notification (total events = 84694) [36749.385653] CPU2: Package power limit notification (total events = 84349) [36749.387077] CPU2: Package power limit normal [36749.387080] CPU0: Package power limit normal [36749.387082] CPU3: Package power limit normal [36749.387084] CPU1: Package power limit normal [37051.323215] CPU1: Package power limit notification (total events = 84699) [37051.323221] CPU0: Package power limit notification (total events = 84697) [37051.323224] CPU3: Package power limit notification (total events = 84362) [37051.323227] CPU2: Package power limit notification (total events = 84354) [37051.324056] CPU2: Package power limit normal [37051.324059] CPU1: Package power limit normal [37051.324061] CPU3: Package power limit normal [37051.324063] CPU0: Package power limit normal [37553.132707] wlan0: authenticate with 00:27:0d:b0:14:80 (try 1) [37553.329061] wlan0: authenticate with 00:27:0d:b0:14:80 (try 2) [37553.330362] wlan0: authenticated [37553.389298] wlan0: waiting for beacon from 00:27:0d:b0:14:80 [37553.478645] wlan0: beacon received [37553.478798] wlan0: associate with 00:27:0d:b0:14:80 (try 1) [37553.484562] wlan0: RX ReassocResp from 00:27:0d:b0:14:80 (capab=0x421 status=0 aid=22) [37553.484601] wlan0: associated [37672.076035] wlan0: authenticate with 00:27:0d:56:9d:90 (try 1) [37672.077596] wlan0: authenticated [37672.143111] wlan0: waiting for beacon from 00:27:0d:56:9d:90 [37679.826809] wlan0: direct probe to 00:27:0d:71:93:00 (try 1/3) [37679.828653] wlan0: direct probe responded [37679.853995] wlan0: authenticate with 00:27:0d:71:93:00 (try 1) [37679.855295] wlan0: authenticated [37679.899360] wlan0: associate with 00:27:0d:71:93:00 (try 1) [37679.903150] wlan0: RX ReassocResp from 00:27:0d:71:93:00 (capab=0x421 status=0 aid=45) [37679.903159] wlan0: associated [37807.314159] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [37807.314170] thinkpad_acpi: unhandled HKEY event 0x6040 [37807.314175] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [37807.315026] thinkpad_acpi: EC reports that Thermal Table has changed [37807.436752] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [37807.436772] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [37807.436786] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [37807.436821] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [37807.436863] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [37807.436925] e1000e 0000:00:19.0: PME# disabled [37807.437077] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [43025.243434] CPU1: Package power limit notification (total events = 84705) [43025.243440] CPU3: Package power limit notification (total events = 84368) [43025.243443] CPU0: Package power limit notification (total events = 84703) [43025.243447] CPU2: Package power limit notification (total events = 84360) [43025.245080] CPU1: Package power limit normal [43025.245083] CPU2: Package power limit normal [43025.245085] CPU3: Package power limit normal [43025.245087] CPU0: Package power limit normal [43025.793012] thinkpad_acpi: unknown possible thermal alarm or keyboard event received [43025.793020] thinkpad_acpi: unhandled HKEY event 0x6040 [43025.793024] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net [43025.793811] thinkpad_acpi: EC reports that Thermal Table has changed [43027.335593] e1000e 0000:00:19.0: PME# enabled [43172.665783] wlan0: deauthenticated from 00:27:0d:71:93:00 (Reason: 2) [43172.735761] cfg80211: All devices are disconnected, going to restore regulatory settings [43172.735809] cfg80211: Restoring regulatory settings [43172.735823] cfg80211: Calling CRDA to update world regulatory domain [43172.823493] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43172.823500] cfg80211: World regulatory domain updated: [43172.823503] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [43172.823508] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43172.823512] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [43172.823515] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [43172.823519] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43172.823522] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.462783] wlan0: authenticate with 00:27:0d:b0:17:a0 (try 1) [43175.464155] wlan0: authenticated [43175.501837] wlan0: waiting for beacon from 00:27:0d:b0:17:a0 [43175.511720] wlan0: beacon received [43175.557129] wlan0: associate with 00:27:0d:b0:17:a0 (try 1) [43175.563351] wlan0: RX ReassocResp from 00:27:0d:b0:17:a0 (capab=0x421 status=0 aid=12) [43175.563360] wlan0: associated [43175.568802] cfg80211: Calling CRDA for country: US [43175.577615] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [43175.577626] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577633] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [43175.577639] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577645] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [43175.577651] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577656] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [43175.577662] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577667] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [43175.577673] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577678] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [43175.577684] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577689] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [43175.577695] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577701] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [43175.577707] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577712] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [43175.577718] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577723] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [43175.577729] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577734] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [43175.577740] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.577745] cfg80211: Disabling freq 2467 MHz [43175.577748] cfg80211: Disabling freq 2472 MHz [43175.577753] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [43175.577759] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [43175.577764] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [43175.577770] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [43175.577775] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [43175.577781] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [43175.577786] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [43175.577792] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [43175.577798] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [43175.577803] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577809] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [43175.577815] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577820] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [43175.577826] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577831] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [43175.577837] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577842] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [43175.577848] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577853] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [43175.577859] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577864] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [43175.577870] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577875] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [43175.577881] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577886] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [43175.577892] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577896] cfg80211: Disabling freq 5600 MHz [43175.577900] cfg80211: Disabling freq 5620 MHz [43175.577903] cfg80211: Disabling freq 5640 MHz [43175.577907] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [43175.577913] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577919] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [43175.577925] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577930] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [43175.577936] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.577941] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [43175.577947] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [43175.577952] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [43175.577958] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [43175.577963] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [43175.577969] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [43175.577974] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [43175.577980] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [43175.577985] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [43175.577991] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [43175.578003] cfg80211: Regulatory domain changed to country: US [43175.578007] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [43175.578013] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [43175.578018] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [43175.578024] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.578029] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.578034] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [43175.578039] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [43178.947359] wlan0: authenticate with 00:27:0d:56:9d:90 (try 1) [43178.956896] wlan0: authenticated [43178.985311] wlan0: waiting for beacon from 00:27:0d:56:9d:90 [43186.837346] wlan0: authenticate with 00:27:0d:56:9d:90 (try 1) [43187.035106] wlan0: authenticate with 00:27:0d:56:9d:90 (try 2) [43187.234658] wlan0: authenticate with 00:27:0d:56:9d:90 (try 3) [43187.434175] wlan0: authentication with 00:27:0d:56:9d:90 timed out [43193.089494] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [43193.147822] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [43194.699352] ADDRCONF(NETDEV_UP): wlan0: link is not ready [43194.972264] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [43195.209246] wlan0: authenticate with 00:26:cb:c6:de:f0 (try 1) [43195.407987] wlan0: authenticate with 00:26:cb:c6:de:f0 (try 2) [43195.410756] wlan0: authenticated [43195.454315] wlan0: waiting for beacon from 00:26:cb:c6:de:f0 [43203.389078] wlan0: authenticate with 00:27:0d:71:8c:e0 (try 1) [43203.392689] wlan0: authenticated [43203.393095] wlan0: associate with 00:27:0d:71:8c:e0 (try 1) [43203.400339] wlan0: RX ReassocResp from 00:27:0d:71:8c:e0 (capab=0x421 status=0 aid=20) [43203.400341] wlan0: associated [43203.406925] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [43214.412781] wlan0: no IPv6 routers present [43302.840504] wlan0: authenticate with 00:26:cb:c6:de:f0 (try 1) [43302.860598] wlan0: authenticated [43302.925906] wlan0: waiting for beacon from 00:26:cb:c6:de:f0 [43303.008047] wlan0: beacon received [43303.012188] wlan0: associate with 00:26:cb:c6:de:f0 (try 1) [43303.014937] wlan0: RX ReassocResp from 00:26:cb:c6:de:f0 (capab=0x421 status=0 aid=14) [43303.014946] wlan0: associated [43354.047211] CPU1: Package power limit notification (total events = 84848) [43354.047218] CPU3: Package power limit notification (total events = 84510) [43354.047221] CPU2: Package power limit notification (total events = 84502) [43354.047224] CPU0: Package power limit notification (total events = 84846) [43354.060252] CPU3: Package power limit normal [43354.060255] CPU2: Package power limit normal [43354.060274] CPU0: Package power limit normal [43354.060277] CPU1: Package power limit normal [43700.709452] CPU2: Package power limit notification (total events = 84865) [43700.709457] CPU3: Package power limit notification (total events = 84873) [43700.709462] CPU1: Package power limit notification (total events = 85212) [43700.709465] CPU0: Package power limit notification (total events = 85210) [43700.711149] CPU2: Package power limit normal [43700.711152] CPU0: Package power limit normal [43700.711155] CPU3: Package power limit normal [43700.711157] CPU1: Package power limit normal [44010.955116] CPU3: Package power limit notification (total events = 84988) [44010.955121] CPU2: Package power limit notification (total events = 84980) [44010.955125] CPU1: Package power limit notification (total events = 85329) [44010.955128] CPU0: Package power limit notification (total events = 85327) [44010.956769] CPU1: Package power limit normal [44010.956772] CPU3: Package power limit normal [44010.956774] CPU2: Package power limit normal [44010.956776] CPU0: Package power limit normal [44320.617234] CPU3: Package power limit notification (total events = 85079) [44320.617238] CPU2: Package power limit notification (total events = 85071) [44320.617242] CPU1: Package power limit notification (total events = 85420) [44320.617246] CPU0: Package power limit notification (total events = 85418) [44320.617794] CPU2: Package power limit normal [44320.617797] CPU0: Package power limit normal [44320.617799] CPU1: Package power limit normal [44320.617801] CPU3: Package power limit normal [44627.837941] CPU2: Package power limit notification (total events = 85120) [44627.837946] CPU3: Package power limit notification (total events = 85128) [44627.837949] CPU1: Package power limit notification (total events = 85469) [44627.837952] CPU0: Package power limit notification (total events = 85467) [44627.839844] CPU0: Package power limit normal [44627.839852] CPU1: Package power limit normal [44627.839989] CPU3: Package power limit normal [44627.839998] CPU2: Package power limit normal [44958.243303] CPU3: Package power limit notification (total events = 85193) [44958.243308] CPU0: Package power limit notification (total events = 85533) [44958.243312] CPU2: Package power limit notification (total events = 85184) [44958.243314] CPU1: Package power limit notification (total events = 85535) [44958.243496] CPU3: Package power limit normal [44958.243498] CPU2: Package power limit normal [44958.243500] CPU1: Package power limit normal [44958.243502] CPU0: Package power limit normal [45262.584225] CPU2: Package power limit notification (total events = 85291) [45262.584238] CPU3: Package power limit notification (total events = 85300) [45262.584242] CPU1: Package power limit notification (total events = 85642) [45262.584245] CPU0: Package power limit notification (total events = 85640) [45262.584645] CPU2: Package power limit normal [45262.584647] CPU3: Package power limit normal [45262.584649] CPU1: Package power limit normal [45262.584651] CPU0: Package power limit normal [45618.171140] CPU3: Package power limit notification (total events = 85396) [45618.171147] CPU0: Package power limit notification (total events = 85736) [45618.171151] CPU1: Package power limit notification (total events = 85738) [45618.171165] CPU2: Package power limit notification (total events = 85387) [45618.171374] CPU0: Package power limit normal [45618.171376] CPU1: Package power limit normal [45618.171379] CPU3: Package power limit normal [45618.171381] CPU2: Package power limit normal [45919.111732] CPU2: Package power limit notification (total events = 85456) [45919.111737] CPU3: Package power limit notification (total events = 85465) [45919.111741] CPU1: Package power limit notification (total events = 85807) [45919.111744] CPU0: Package power limit notification (total events = 85805) [45919.112569] CPU2: Package power limit normal [45919.112577] CPU3: Package power limit normal [45919.112629] CPU0: Package power limit normal [45919.112631] CPU1: Package power limit normal [46177.084777] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [46177.084785] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [46177.084791] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [46177.084807] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [46177.084824] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [46177.084854] e1000e 0000:00:19.0: PME# disabled [46177.084917] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [46177.327930] e1000e 0000:00:19.0: PME# enabled [46177.740807] wlan0: deauthenticating from 00:26:cb:c6:de:f0 by local choice (reason=3) [46177.771513] cfg80211: All devices are disconnected, going to restore regulatory settings [46177.771524] cfg80211: Restoring regulatory settings [46177.771534] cfg80211: Calling CRDA to update world regulatory domain [46177.844895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [46177.844903] cfg80211: World regulatory domain updated: [46177.844906] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [46177.844912] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46177.844917] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [46177.844921] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [46177.844925] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46177.844930] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46178.601482] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [46178.601490] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [46178.601496] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [46178.601534] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [46178.601576] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [46178.601669] e1000e 0000:00:19.0: PME# disabled [46180.412939] PM: Syncing filesystems ... done. [46180.468899] PM: Preparing system for mem sleep [46181.195728] Freezing user space processes ... (elapsed 0.01 seconds) done. [46181.211577] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [46181.227540] PM: Entering mem sleep [46181.227607] Suspending console(s) (use no_console_suspend to debug) [46181.227844] sd 0:0:0:0: [sda] Synchronizing SCSI cache [46181.228054] sd 0:0:0:0: [sda] Stopping disk [46181.435019] PM: suspend of drv:tpm_tis dev:00:0a complete after 191.954 msecs [46181.435184] ehci_hcd 0000:00:1d.0: PCI INT A disabled [46181.435268] ehci_hcd 0000:00:1a.0: PCI INT A disabled [46181.435374] ACPI handle has no context! [46181.436302] sdhci-pci 0000:0d:00.0: PCI INT A disabled [46181.451017] i915 0000:00:02.0: power state changed by ACPI to D3 [46181.530410] e1000e 0000:00:19.0: PME# enabled [46181.530420] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [46181.539157] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [46181.542745] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 107.708 msecs [46181.554710] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.712 msecs [46181.693922] PM: suspend of drv:sd dev:0:0:0:0 complete after 467.130 msecs [46181.693964] PM: suspend of drv:scsi dev:target0:0:0 complete after 467.155 msecs [46181.694006] PM: suspend of drv:scsi dev:host0 complete after 451.543 msecs [46181.714357] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 279.859 msecs [46181.714466] PM: suspend of drv: dev:pci0000:00 complete after 279.636 msecs [46181.714477] PM: suspend of devices complete after 487.891 msecs [46181.714479] PM: suspend devices took 0.488 seconds [46181.730455] ehci_hcd 0000:00:1d.0: PME# enabled [46181.730461] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [46181.746298] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [46181.746525] ehci_hcd 0000:00:1a.0: PME# enabled [46181.746530] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [46181.762262] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [46181.778284] PM: late suspend of devices complete after 63.943 msecs [46181.778453] ACPI: Preparing to enter system sleep state S3 [46181.949899] PM: Saving platform NVS memory [46181.952840] Disabling non-boot CPUs ... [46181.954253] CPU 1 is now offline [46182.057567] CPU 2 is now offline [46182.161333] CPU 3 is now offline [46182.161674] Extended CMOS year: 2000 [46182.161929] ACPI: Low-level resume complete [46182.162007] PM: Restoring platform NVS memory [46182.164065] Extended CMOS year: 2000 [46182.164201] Enabling non-boot CPUs ... [46182.164303] Booting Node 0 Processor 1 APIC 0x1 [46182.164304] smpboot cpu 1: start_ip = 98000 [46182.175210] Calibrating delay loop (skipped) already calibrated this CPU [46182.175224] Disabled fast string operations [46182.195551] NMI watchdog enabled, takes one hw-pmu counter. [46182.227741] CPU1 is up [46182.227888] Booting Node 0 Processor 2 APIC 0x2 [46182.227890] smpboot cpu 2: start_ip = 98000 [46182.238794] Calibrating delay loop (skipped) already calibrated this CPU [46182.238807] Disabled fast string operations [46182.259170] NMI watchdog enabled, takes one hw-pmu counter. [46182.287533] CPU2 is up [46182.287609] Booting Node 0 Processor 3 APIC 0x3 [46182.287610] smpboot cpu 3: start_ip = 98000 [46182.298514] Calibrating delay loop (skipped) already calibrated this CPU [46182.298526] Disabled fast string operations [46182.318964] NMI watchdog enabled, takes one hw-pmu counter. [46182.347497] CPU3 is up [46182.351036] ACPI: Waking up from system sleep state S3 [46182.670679] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [46182.670687] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [46182.670706] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [46182.670719] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xf1525004) [46182.670725] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [46182.670743] serial 0000:00:16.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [46182.670755] serial 0000:00:16.3: restoring config space at offset 0x5 (was 0x0, writing 0xf152c000) [46182.670760] serial 0000:00:16.3: restoring config space at offset 0x4 (was 0x1, writing 0x40b1) [46182.670765] serial 0000:00:16.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [46182.670784] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [46182.670796] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x4081) [46182.670803] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [46182.670827] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [46182.670841] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf152a000) [46182.670848] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [46182.670868] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [46182.670873] ehci_hcd 0000:00:1a.0: PME# disabled [46182.670876] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [46182.670880] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [46182.670894] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [46182.670906] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1520004) [46182.670910] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [46182.670916] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [46182.670950] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [46182.670962] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [46182.670967] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [46182.670971] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [46182.670980] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [46182.670986] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [46182.671033] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [46182.671046] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [46182.671051] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf140f140) [46182.671055] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [46182.671065] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [46182.671071] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [46182.671120] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [46182.671134] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xf0b1f041) [46182.671139] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf130f0c0) [46182.671144] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [46182.671154] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [46182.671160] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [46182.671197] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [46182.671211] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf1529000) [46182.671218] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [46182.671233] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [46182.671237] ehci_hcd 0000:00:1d.0: PME# disabled [46182.671239] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [46182.671242] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [46182.671300] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [46182.671448] iwlwifi 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [46182.671556] iwlwifi 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1400004) [46182.671590] iwlwifi 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [46182.671634] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [46182.671859] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [46182.671889] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0c00000) [46182.671895] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [46182.671901] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x2 (was 0x8050104, writing 0x8050107) [46182.671907] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [46182.671913] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x0 (was 0xe8231180, writing 0xe8221180) [46182.671951] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [46182.672027] PM: early resume of devices complete after 1.390 msecs [46182.672121] i915 0000:00:02.0: power state changed by ACPI to D0 [46182.672124] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [46182.672128] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [46182.672130] i915 0000:00:02.0: power state changed by ACPI to D0 [46182.672132] e1000e 0000:00:19.0: PME# disabled [46182.672134] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [46182.672136] i915 0000:00:02.0: setting latency timer to 64 [46182.672143] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [46182.672154] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [46182.672156] mei 0000:00:16.0: irq 43 for MSI/MSI-X [46182.672176] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [46182.672183] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [46182.672227] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [46182.672231] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [46182.672235] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [46182.672242] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [46182.672244] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [46182.672252] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [46182.672326] ahci 0000:00:1f.2: setting latency timer to 64 [46182.672337] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [46182.686542] sd 0:0:0:0: [sda] Starting disk [46182.711531] Extended CMOS year: 2000 [46182.773827] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 101.938 msecs [46182.777855] watchdog: only one watchdog can use /dev/watchdog. [46182.777859] watchdog: error registering /dev/watchdog (err=-16). [46182.777860] mei: unable to register watchdog device. [46182.850224] PM: resume of drv: dev:ep_00 complete after 177.870 msecs [46182.850246] PM: resume of drv:hub dev:1-1:1.0 complete after 177.937 msecs [46182.850254] PM: resume of drv: dev:ep_81 complete after 177.928 msecs [46182.922192] usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd [46183.013838] ata5: SATA link down (SStatus 0 SControl 300) [46183.024086] PM: resume of drv: dev:ep_00 complete after 351.975 msecs [46183.024089] PM: resume of drv:uvcvideo dev:1-1.6:1.1 complete after 351.992 msecs [46183.024093] PM: resume of drv:uvcvideo dev:1-1.6:1.0 complete after 352.037 msecs [46183.024103] PM: resume of drv: dev:ep_81 complete after 352.032 msecs [46183.029786] ata2: SATA link down (SStatus 0 SControl 300) [46183.058344] PM: resume of drv:i915 dev:0000:00:02.0 complete after 387.117 msecs [46183.173454] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [46183.173517] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.327 msecs [46184.634139] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [46184.635319] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [46184.635330] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [46184.635337] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [46184.637610] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [46184.637620] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [46184.637627] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [46184.638595] ata1.00: configured for UDMA/100 [46184.667783] PM: resume of drv:sd dev:0:0:0:0 complete after 1999.641 msecs [46184.667844] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1999.695 msecs [46184.667847] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1960.737 msecs [46184.668592] PM: resume of devices complete after 2001.068 msecs [46184.668655] PM: resume devices took 2.000 seconds [46184.668731] PM: Finishing wakeup. [46184.668732] Restarting tasks ... done. [46184.698166] video LNXVIDEO:00: Restoring backlight state [46184.843391] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [46185.956003] init: anacron main process (19891) killed by TERM signal [46186.012467] e1000e 0000:00:19.0: PME# enabled [46186.162592] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [46186.162599] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [46186.162606] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [46186.162623] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [46186.162640] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [46186.162685] e1000e 0000:00:19.0: PME# disabled [46186.286460] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [46186.342317] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [46186.343005] ADDRCONF(NETDEV_UP): eth0: link is not ready [46186.344310] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [46186.344543] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [46186.470987] ADDRCONF(NETDEV_UP): wlan0: link is not ready [46187.552175] e1000e 0000:00:19.0: PME# enabled [46189.459138] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [46192.651607] wlan0: authenticate with 00:27:0d:56:9d:90 (try 1) [46192.652994] wlan0: authenticated [46192.698706] wlan0: waiting for beacon from 00:27:0d:56:9d:90 [46200.233091] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [46200.517798] wlan0: authenticate with 00:27:0d:56:9d:90 (try 1) [46200.519289] wlan0: authenticated [46200.558263] wlan0: waiting for beacon from 00:27:0d:56:9d:90 [46200.565594] wlan0: beacon received [46200.593928] wlan0: associate with 00:27:0d:56:9d:90 (try 1) [46200.598430] wlan0: RX AssocResp from 00:27:0d:56:9d:90 (capab=0x421 status=0 aid=19) [46200.598440] wlan0: associated [46200.603585] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [46200.603795] cfg80211: Calling CRDA for country: US [46200.697895] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [46200.697898] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697901] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [46200.697903] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697904] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [46200.697906] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697908] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [46200.697910] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697912] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [46200.697913] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697915] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [46200.697917] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697919] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [46200.697921] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697922] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [46200.697924] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697926] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [46200.697928] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697929] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [46200.697931] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697933] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [46200.697935] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.697936] cfg80211: Disabling freq 2467 MHz [46200.697938] cfg80211: Disabling freq 2472 MHz [46200.697939] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [46200.697941] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [46200.697943] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [46200.697944] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [46200.697946] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [46200.697948] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [46200.697950] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [46200.697952] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [46200.697953] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [46200.697955] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697957] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [46200.697959] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697960] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [46200.697962] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697964] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [46200.697966] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697968] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [46200.697969] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697971] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [46200.697973] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697975] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [46200.697977] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697978] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [46200.697980] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697982] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [46200.697984] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697985] cfg80211: Disabling freq 5600 MHz [46200.697986] cfg80211: Disabling freq 5620 MHz [46200.697987] cfg80211: Disabling freq 5640 MHz [46200.697989] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [46200.697991] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697992] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [46200.697994] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697996] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [46200.697998] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.697999] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [46200.698001] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [46200.698003] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [46200.698005] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [46200.698007] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [46200.698009] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [46200.698010] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [46200.698012] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [46200.698014] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [46200.698016] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [46200.698019] cfg80211: Regulatory domain changed to country: US [46200.698021] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [46200.698023] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [46200.698025] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [46200.698026] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.698028] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.698030] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [46200.698031] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [46208.864482] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [46210.746837] wlan0: no IPv6 routers present [46211.903856] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [46310.020296] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [46424.397985] CPU0: Package power limit notification (total events = 85980) [46424.397988] CPU1: Package power limit notification (total events = 85982) [46424.398008] CPU3: Package power limit notification (total events = 85639) [46424.398010] CPU2: Package power limit notification (total events = 85630) [46424.398178] CPU1: Package power limit normal [46424.398181] CPU3: Package power limit normal [46424.398183] CPU2: Package power limit normal [46424.398184] CPU0: Package power limit normal [46491.213942] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [46804.574782] CPU1: Package power limit notification (total events = 85990) [46804.574787] CPU2: Package power limit notification (total events = 85639) [46804.574790] CPU3: Package power limit notification (total events = 85648) [46804.574793] CPU0: Package power limit notification (total events = 85988) [46804.576702] CPU0: Package power limit normal [46804.576705] CPU1: Package power limit normal [46804.576708] CPU2: Package power limit normal [46804.576710] CPU3: Package power limit normal [47149.896814] CPU2: Package power limit notification (total events = 85667) [47149.896819] CPU3: Package power limit notification (total events = 85676) [47149.896822] CPU1: Package power limit notification (total events = 86018) [47149.896825] CPU0: Package power limit notification (total events = 86016) [47149.898589] CPU1: Package power limit normal [47149.898591] CPU2: Package power limit normal [47149.898593] CPU3: Package power limit normal [47149.898595] CPU0: Package power limit normal [47156.338133] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [47156.338150] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [47156.338155] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [47156.338170] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [47156.338185] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [47156.338231] e1000e 0000:00:19.0: PME# disabled [47156.338336] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [47156.585235] e1000e 0000:00:19.0: PME# enabled [47156.929447] wlan0: deauthenticating from 00:27:0d:56:9d:90 by local choice (reason=3) [47156.953758] cfg80211: All devices are disconnected, going to restore regulatory settings [47156.953768] cfg80211: Restoring regulatory settings [47156.953780] cfg80211: Calling CRDA to update world regulatory domain [47156.965547] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [47156.965551] cfg80211: World regulatory domain updated: [47156.965552] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [47156.965554] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47156.965557] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [47156.965559] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [47156.965560] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47156.965563] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47157.503526] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [47157.503548] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [47157.503566] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [47157.503609] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [47157.503657] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [47157.503761] e1000e 0000:00:19.0: PME# disabled [47158.113584] init: anacron main process (20429) killed by TERM signal [47160.410707] PM: Syncing filesystems ... done. [47160.493451] PM: Preparing system for mem sleep [47161.127507] Freezing user space processes ... (elapsed 0.01 seconds) done. [47161.143377] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [47161.159354] PM: Entering mem sleep [47161.159431] Suspending console(s) (use no_console_suspend to debug) [47161.159691] sd 0:0:0:0: [sda] Synchronizing SCSI cache [47161.177570] sd 0:0:0:0: [sda] Stopping disk [47161.362831] PM: suspend of drv:tpm_tis dev:00:0a complete after 189.447 msecs [47161.363023] ehci_hcd 0000:00:1d.0: PCI INT A disabled [47161.363043] ehci_hcd 0000:00:1a.0: PCI INT A disabled [47161.363128] ACPI handle has no context! [47161.364102] sdhci-pci 0000:0d:00.0: PCI INT A disabled [47161.378785] i915 0000:00:02.0: power state changed by ACPI to D3 [47161.458225] e1000e 0000:00:19.0: PME# enabled [47161.458236] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [47161.467013] snd_hda_intel 0000:00:1b.0: PCI INT A disabled [47161.470510] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 107.699 msecs [47161.482511] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.737 msecs [47161.643940] PM: suspend of drv:sd dev:0:0:0:0 complete after 485.340 msecs [47161.644011] PM: suspend of drv:scsi dev:target0:0:0 complete after 485.358 msecs [47161.644061] PM: suspend of drv:scsi dev:host0 complete after 471.264 msecs [47161.666104] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 303.815 msecs [47161.666244] PM: suspend of drv: dev:pci0000:00 complete after 303.718 msecs [47161.666256] PM: suspend of devices complete after 507.888 msecs [47161.666258] PM: suspend devices took 0.508 seconds [47161.682202] ehci_hcd 0000:00:1d.0: PME# enabled [47161.682209] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [47161.698047] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [47161.698273] ehci_hcd 0000:00:1a.0: PME# enabled [47161.698277] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [47161.714010] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [47161.730033] PM: late suspend of devices complete after 63.913 msecs [47161.730202] ACPI: Preparing to enter system sleep state S3 [47161.901650] PM: Saving platform NVS memory [47161.904640] Disabling non-boot CPUs ... [47161.906276] CPU 1 is now offline [47162.009308] CPU 2 is now offline [47162.113086] CPU 3 is now offline [47162.113422] Extended CMOS year: 2000 [47162.113678] ACPI: Low-level resume complete [47162.113755] PM: Restoring platform NVS memory [47162.115814] Extended CMOS year: 2000 [47162.115956] Enabling non-boot CPUs ... [47162.116066] Booting Node 0 Processor 1 APIC 0x1 [47162.116067] smpboot cpu 1: start_ip = 98000 [47162.126974] Calibrating delay loop (skipped) already calibrated this CPU [47162.126988] Disabled fast string operations [47162.147337] NMI watchdog enabled, takes one hw-pmu counter. [47162.179495] CPU1 is up [47162.179642] Booting Node 0 Processor 2 APIC 0x2 [47162.179643] smpboot cpu 2: start_ip = 98000 [47162.190548] Calibrating delay loop (skipped) already calibrated this CPU [47162.190560] Disabled fast string operations [47162.210903] NMI watchdog enabled, takes one hw-pmu counter. [47162.275192] CPU2 is up [47162.275410] Booting Node 0 Processor 3 APIC 0x3 [47162.275412] smpboot cpu 3: start_ip = 98000 [47162.286314] Calibrating delay loop (skipped) already calibrated this CPU [47162.286326] Disabled fast string operations [47162.306789] NMI watchdog enabled, takes one hw-pmu counter. [47162.343102] CPU3 is up [47162.346645] ACPI: Waking up from system sleep state S3 [47162.666332] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [47162.666340] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [47162.666358] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [47162.666371] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xf1525004) [47162.666377] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [47162.666395] serial 0000:00:16.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [47162.666407] serial 0000:00:16.3: restoring config space at offset 0x5 (was 0x0, writing 0xf152c000) [47162.666411] serial 0000:00:16.3: restoring config space at offset 0x4 (was 0x1, writing 0x40b1) [47162.666417] serial 0000:00:16.3: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007) [47162.666436] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [47162.666447] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x4081) [47162.666455] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007) [47162.666478] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [47162.666493] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf152a000) [47162.666499] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [47162.666519] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [47162.666524] ehci_hcd 0000:00:1a.0: PME# disabled [47162.666527] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [47162.666530] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [47162.666545] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [47162.666558] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1520004) [47162.666562] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [47162.666567] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [47162.666601] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [47162.666615] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [47162.666619] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [47162.666624] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [47162.666634] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [47162.666641] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004) [47162.666689] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x207) [47162.666702] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [47162.666707] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf140f140) [47162.666712] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0) [47162.666722] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [47162.666729] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [47162.666775] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [47162.666789] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xf0b1f041) [47162.666794] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf130f0c0) [47162.666799] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [47162.666809] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [47162.666816] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [47162.666853] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [47162.666867] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf1529000) [47162.666874] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [47162.666889] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [47162.666893] ehci_hcd 0000:00:1d.0: PME# disabled [47162.666895] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [47162.666898] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [47162.666956] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [47162.667122] iwlwifi 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [47162.667216] iwlwifi 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1400004) [47162.667251] iwlwifi 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [47162.667295] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [47162.667548] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [47162.667579] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0c00000) [47162.667585] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [47162.667591] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x2 (was 0x8050104, writing 0x8050107) [47162.667597] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [47162.667602] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x0 (was 0xe8231180, writing 0xe8221180) [47162.667641] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [47162.667716] PM: early resume of devices complete after 1.428 msecs [47162.667792] i915 0000:00:02.0: power state changed by ACPI to D0 [47162.667795] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [47162.667800] e1000e 0000:00:19.0: PME# disabled [47162.667818] mei 0000:00:16.0: irq 43 for MSI/MSI-X [47162.667849] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [47162.667857] i915 0000:00:02.0: power state changed by ACPI to D0 [47162.667865] i915 0000:00:02.0: setting latency timer to 64 [47162.667939] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [47162.674205] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [47162.674225] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [47162.674232] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [47162.674270] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [47162.674322] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [47162.674329] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [47162.674335] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [47162.674362] ahci 0000:00:1f.2: setting latency timer to 64 [47162.674438] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [47162.674442] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [47162.674444] sd 0:0:0:0: [sda] Starting disk [47162.674447] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [47162.674453] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [47162.731788] watchdog: only one watchdog can use /dev/watchdog. [47162.731791] watchdog: error registering /dev/watchdog (err=-16). [47162.731802] mei: unable to register watchdog device. [47162.769417] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 101.853 msecs [47162.853872] PM: resume of drv: dev:ep_00 complete after 179.793 msecs [47162.853876] PM: resume of drv:hub dev:1-1:1.0 complete after 179.844 msecs [47162.853888] PM: resume of drv: dev:ep_81 complete after 179.852 msecs [47162.925924] usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd [47162.993495] ata5: SATA link down (SStatus 0 SControl 300) [47163.009494] ata2: SATA link down (SStatus 0 SControl 300) [47163.027727] PM: resume of drv: dev:ep_00 complete after 353.875 msecs [47163.027731] PM: resume of drv:uvcvideo dev:1-1.6:1.1 complete after 353.930 msecs [47163.027734] PM: resume of drv:uvcvideo dev:1-1.6:1.0 complete after 353.978 msecs [47163.027781] PM: resume of drv: dev:ep_81 complete after 354.003 msecs [47163.049982] PM: resume of drv:i915 dev:0000:00:02.0 complete after 383.076 msecs [47163.177112] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [47163.177187] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 510.417 msecs [47164.573913] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [47164.575118] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [47164.575129] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [47164.575136] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [47164.577402] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [47164.577412] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [47164.577420] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [47164.578379] ata1.00: configured for UDMA/100 [47164.613077] PM: resume of drv:sd dev:0:0:0:0 complete after 1943.041 msecs [47164.613141] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1906.356 msecs [47164.613152] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1943.111 msecs [47164.613820] PM: resume of devices complete after 1950.493 msecs [47164.613881] PM: resume devices took 1.952 seconds [47164.613956] PM: Finishing wakeup. [47164.613957] Restarting tasks ... done. [47164.634009] video LNXVIDEO:00: Restoring backlight state [47164.641981] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [47164.970734] init: anacron main process (20845) killed by TERM signal [47165.005110] e1000e 0000:00:19.0: PME# enabled [47165.084744] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf1500000-0xf151ffff] (PCI address [0xf1500000-0xf151ffff]) [47165.084751] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf152b000-0xf152bfff] (PCI address [0xf152b000-0xf152bfff]) [47165.084757] e1000e 0000:00:19.0: BAR 2: set to [io 0x4080-0x409f] (PCI address [0x4080-0x409f]) [47165.084773] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [47165.084790] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [47165.084833] e1000e 0000:00:19.0: PME# disabled [47165.212557] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [47165.268314] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [47165.268715] ADDRCONF(NETDEV_UP): eth0: link is not ready [47165.269658] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [47165.269888] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [47165.401705] ADDRCONF(NETDEV_UP): wlan0: link is not ready [47166.477787] e1000e 0000:00:19.0: PME# enabled [47166.869961] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [47170.831807] usb 2-1.2: new high-speed USB device number 6 using ehci_hcd [47170.930440] scsi8 : usb-storage 2-1.2:1.0 [47171.483297] wlan0: authenticate with 00:27:0d:71:93:00 (try 1) [47171.485844] wlan0: authenticated [47171.525129] wlan0: associate with 00:27:0d:71:93:00 (try 1) [47171.530578] wlan0: RX AssocResp from 00:27:0d:71:93:00 (capab=0x421 status=0 aid=37) [47171.530585] wlan0: associated [47171.539479] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [47171.539646] cfg80211: Calling CRDA for country: US [47171.550587] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [47171.550591] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550593] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [47171.550595] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550597] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [47171.550600] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550601] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [47171.550613] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550615] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [47171.550617] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550619] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [47171.550621] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550622] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [47171.550624] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550626] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [47171.550628] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550630] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [47171.550632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550634] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [47171.550636] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550638] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [47171.550640] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550641] cfg80211: Disabling freq 2467 MHz [47171.550643] cfg80211: Disabling freq 2472 MHz [47171.550645] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [47171.550647] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [47171.550649] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [47171.550651] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [47171.550653] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [47171.550655] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [47171.550657] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [47171.550659] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [47171.550661] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [47171.550663] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550665] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [47171.550666] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550671] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [47171.550674] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550675] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [47171.550677] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550679] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [47171.550681] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550683] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [47171.550685] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550687] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [47171.550689] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550690] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [47171.550692] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550694] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [47171.550696] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550697] cfg80211: Disabling freq 5600 MHz [47171.550698] cfg80211: Disabling freq 5620 MHz [47171.550699] cfg80211: Disabling freq 5640 MHz [47171.550701] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [47171.550703] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550704] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [47171.550706] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550708] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [47171.550711] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550712] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [47171.550714] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [47171.550716] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [47171.550718] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [47171.550720] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [47171.550722] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [47171.550723] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [47171.550725] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [47171.550727] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [47171.550729] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [47171.550733] cfg80211: Regulatory domain changed to country: US [47171.550734] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [47171.550736] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [47171.550738] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [47171.550740] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550742] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550744] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [47171.550746] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [47171.927119] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 CCS [47171.928021] sd 8:0:0:0: Attached scsi generic sg1 type 0 [47171.929271] sd 8:0:0:0: [sdb] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB) [47171.929899] sd 8:0:0:0: [sdb] Write Protect is off [47171.929909] sd 8:0:0:0: [sdb] Mode Sense: 4b 00 00 08 [47171.930405] sd 8:0:0:0: [sdb] No Caching mode page present [47171.930412] sd 8:0:0:0: [sdb] Assuming drive cache: write through [47171.933022] sd 8:0:0:0: [sdb] No Caching mode page present [47171.933029] sd 8:0:0:0: [sdb] Assuming drive cache: write through [47171.934604] sdb: sdb1 [47171.937023] sd 8:0:0:0: [sdb] No Caching mode page present [47171.937034] sd 8:0:0:0: [sdb] Assuming drive cache: write through [47171.937041] sd 8:0:0:0: [sdb] Attached SCSI removable disk [47182.321442] wlan0: no IPv6 routers present [47184.365519] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [47187.508409] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0 [47187.732351] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0 [47190.759376] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [47230.162112] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [47369.582000] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [47776.170650] CPU1: Package power limit notification (total events = 86131) [47776.170654] CPU0: Package power limit notification (total events = 86129) [47776.170658] CPU2: Package power limit notification (total events = 85779) [47776.170662] CPU3: Package power limit notification (total events = 85788) [47776.171094] CPU3: Package power limit normal [47776.171096] CPU2: Package power limit normal [47776.171099] CPU1: Package power limit normal [47776.171101] CPU0: Package power limit normal [47953.538194] usb 2-1.1: new low-speed USB device number 7 using ehci_hcd [47953.638651] input: Yubico Yubico Yubikey II as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input12 [47953.639086] generic-usb 0003:1050:0010.0002: input,hidraw0: USB HID v1.11 Keyboard [Yubico Yubico Yubikey II] on usb-0000:00:1d.0-1.1/input0 [48192.545908] CPU0: Package power limit notification (total events = 86152) [48192.545914] CPU2: Package power limit notification (total events = 85802) [48192.545918] CPU1: Package power limit notification (total events = 86154) [48192.545921] CPU3: Package power limit notification (total events = 85811) [48192.547361] CPU3: Package power limit normal [48192.547363] CPU2: Package power limit normal [48192.547366] CPU0: Package power limit normal [48192.547368] CPU1: Package power limit normal [48525.884107] CPU0: Package power limit notification (total events = 86219) [48525.884112] CPU1: Package power limit notification (total events = 86221) [48525.884116] CPU3: Package power limit notification (total events = 85878) [48525.884119] CPU2: Package power limit notification (total events = 85869) [48525.885208] CPU2: Package power limit normal [48525.885209] CPU3: Package power limit normal [48525.885235] CPU1: Package power limit normal [48525.885237] CPU0: Package power limit normal [48852.738964] CPU2: Package power limit notification (total events = 85878) [48852.738969] CPU3: Package power limit notification (total events = 85887) [48852.738972] CPU1: Package power limit notification (total events = 86230) [48852.738975] CPU0: Package power limit notification (total events = 86228) [48852.739717] CPU2: Package power limit normal [48852.739719] CPU3: Package power limit normal [48852.739721] CPU1: Package power limit normal [48852.739723] CPU0: Package power limit normal [49159.188946] CPU1: Package power limit notification (total events = 86381) [49159.188952] CPU2: Package power limit notification (total events = 86029) [49159.188955] CPU3: Package power limit notification (total events = 86038) [49159.188958] CPU0: Package power limit notification (total events = 86379) [49159.201933] CPU0: Package power limit normal [49159.201936] CPU1: Package power limit normal [49159.201955] CPU2: Package power limit normal [49159.201958] CPU3: Package power limit normal [49604.146060] CPU2: Package power limit notification (total events = 86100) [49604.146066] CPU1: Package power limit notification (total events = 86452) [49604.146070] CPU0: Package power limit notification (total events = 86450) [49604.146073] CPU3: Package power limit notification (total events = 86109) [49604.147855] CPU3: Package power limit normal [49604.147857] CPU2: Package power limit normal [49604.147874] CPU1: Package power limit normal [49604.147876] CPU0: Package power limit normal [49927.185212] CPU3: Package power limit notification (total events = 86110) [49927.185217] CPU1: Package power limit notification (total events = 86453) [49927.185220] CPU2: Package power limit notification (total events = 86101) [49927.185223] CPU0: Package power limit notification (total events = 86451) [49927.188924] CPU2: Package power limit normal [49927.188927] CPU1: Package power limit normal [49927.188930] CPU3: Package power limit normal [49927.188932] CPU0: Package power limit normal