Bug #459648 “udev-configure-printer /invalid or missing IEEE 128...” : Bugs : system-config-printer package : Ubuntu

Revision history for this message

starslights (starslights) wrote on 2009-10-24:

#1

BootDmesg.txt Edit (50.3 KiB, text/plain; charset="utf-8")
CurrentDmesg.txt Edit (5.6 KiB, text/plain; charset="utf-8")
Dependencies.txt Edit (1.2 KiB, text/plain; charset="utf-8")
Lspci.txt Edit (15.0 KiB, text/plain; charset="utf-8")
Lsusb.txt Edit (715 bytes, text/plain; charset="utf-8")
ProcCpuinfo.txt Edit (2.9 KiB, text/plain; charset="utf-8")
ProcInterrupts.txt Edit (2.0 KiB, text/plain; charset="utf-8")
ProcModules.txt Edit (3.7 KiB, text/plain; charset="utf-8")
UdevDb.txt Edit (107.9 KiB, text/plain; charset="utf-8")
UdevLog.gz Edit (24.6 KiB, application/x-gzip)

Scott James Remnant (Canonical) (canonical-scott) on 2009-10-26

affects:

udev (Ubuntu) → system-config-printer (Ubuntu)

Revision history for this message

net4home (net4home) wrote on 2009-11-06:

#2

This also effects new installations loading printer drivers for a network printer. Let me know if you need any more information from my system.

Thanks
Kevin

Revision history for this message

Jeff Long (isorhythmic) wrote on 2009-12-17:

#3

Has anything been done on this yet? I cannot use my laserjet with the USB-parallel cable, but other USB printers work fine.

Revision history for this message

mstombs (michael-tombs) wrote on 2009-12-17:

#4

Not an extensive test, but I also had this problem, but just tried again, and despite these errors in the log, my HP Laserjet now works via usb to parallel adaptor:-

Dec 17 22:42:28 i6600quad kernel: [ 1524.620355] usb 2-4.1: new full speed USB device using ehci_hcd and address 4
Dec 17 22:42:28 i6600quad udev-configure-printer: add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1:1.0
Dec 17 22:42:28 i6600quad udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1
Dec 17 22:42:28 i6600quad udev-configure-printer: Device vendor/product is 067B:2305
Dec 17 22:42:28 i6600quad kernel: [ 1524.731459] usb 2-4.1: configuration #1 chosen from 1 choice
Dec 17 22:42:28 i6600quad udev-configure-printer: add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1:1.0/usb/lp0
Dec 17 22:42:28 i6600quad kernel: [ 1524.815064] usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
Dec 17 22:42:28 i6600quad kernel: [ 1524.815087] usbcore: registered new interface driver usblp
Dec 17 22:42:29 i6600quad udev-configure-printer: failed to claim interface
Dec 17 22:42:29 i6600quad udev-configure-printer: failed to claim interface
Dec 17 22:42:29 i6600quad udev-configure-printer: invalid or missing IEEE 1284 Device ID
Dec 17 22:42:29 i6600quad udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1
Dec 17 22:42:29 i6600quad udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1220 SERN:- serial:
Dec 17 22:42:30 i6600quad kernel: [ 1526.049640] usb 2-4.1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
Dec 17 22:42:30 i6600quad hp[2387]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Dec 17 22:42:30 i6600quad python: io/hpmud/pp.c 627: unable to read device-id ret=-1
Dec 17 22:42:32 i6600quad udev-configure-printer: URI matches without serial number: usb://HP/LaserJet%201220
Dec 17 22:42:32 i6600quad udev-configure-printer: No serial number URI matches so using those without
Dec 17 22:42:32 i6600quad udev-configure-printer: About to add queue for usb://HP/LaserJet%201220
Dec 17 22:42:32 i6600quad udev-add-printer: add_queue: URIs=['usb://HP/LaserJet%201220']
Dec 17 22:42:38 i6600quad udev-add-printer: PPD: lsb/usr/hplip/HP/hp-laserjet_1220-ps.ppd; Status: 0
Dec 17 22:42:38 i6600quad udev-add-printer: HP LaserJet 1220: Checking whether plugin is needed

What's changed? Well I had to do a full clean re-install, and later a re-install without re-format. Now using this kernel

Linux i6600quad 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009 x86_64 GNU/Linux

and also the lucid version of usbutils usbutils_0.86-2ubuntu1_amd64.deb

Not an extensive test, but I also had this problem, but just tried again, and despite these errors in the log, my HP Laserjet now works via usb to parallel adaptor:-

Dec 17 22:42:28 i6600quad kernel: [ 1524.620355] usb 2-4.1: new full speed USB device using ehci_hcd and address 4
Dec 17 22:42:28 i6600quad udev-configure-printer: add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1:1.0
Dec 17 22:42:28 i6600quad udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1
Dec 17 22:42:28 i6600quad udev-configure-printer: Device vendor/product is 067B:2305
Dec 17 22:42:28 i6600quad kernel: [ 1524.731459] usb 2-4.1: configuration #1 chosen from 1 choice
Dec 17 22:42:28 i6600quad udev-configure-printer: add /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1:1.0/usb/lp0
Dec 17 22:42:28 i6600quad kernel: [ 1524.815064] usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
Dec 17 22:42:28 i6600quad kernel: [ 1524.815087] usbcore: registered new interface driver usblp
Dec 17 22:42:29 i6600quad udev-configure-printer: failed to claim interface
Dec 17 22:42:29 i6600quad udev-configure-printer: failed to claim interface
Dec 17 22:42:29 i6600quad udev-configure-printer: invalid or missing IEEE 1284 Device ID
Dec 17 22:42:29 i6600quad udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1
Dec 17 22:42:29 i6600quad udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1220 SERN:- serial:
Dec 17 22:42:30 i6600quad kernel: [ 1526.049640] usb 2-4.1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
Dec 17 22:42:30 i6600quad hp[2387]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Dec 17 22:42:30 i6600quad python: io/hpmud/pp.c 627: unable to read device-id ret=-1
Dec 17 22:42:32 i6600quad udev-configure-printer: URI matches without serial number: usb://HP/LaserJet%201220
Dec 17 22:42:32 i6600quad udev-configure-printer: No serial number URI matches so using those without
Dec 17 22:42:32 i6600quad udev-configure-printer: About to add queue for usb://HP/LaserJet%201220
Dec 17 22:42:32 i6600quad udev-add-printer: add_queue: URIs=['usb://HP/LaserJet%201220']
Dec 17 22:42:38 i6600quad udev-add-printer: PPD: lsb/usr/hplip/HP/hp-laserjet_1220-ps.ppd; Status: 0
Dec 17 22:42:38 i6600quad udev-add-printer: HP LaserJet 1220: Checking whether plugin is needed

What's changed?  Well I had to do a full clean re-install, and later a re-install without re-format.  Now using this kernel

Linux i6600quad 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009 x86_64 GNU/Linux

and also the lucid version of usbutils usbutils_0.86-2ubuntu1_amd64.deb

Revision history for this message

Ariel Faigon (ariel.faigon) wrote on 2010-01-17:

#5

I've been seeing this too lately. I believe it is since one of the recent kernel upgrades, but can't be 100% sure.

I'm running:
Linux ze 2.6.31-18-generic #55-Ubuntu SMP Fri Jan 8 14:54:52 UTC 2010 x86_64 GNU/Linux

Aside: I've switched my printing to a network (ethernet) printer so I have no problems actually printing. The only annoyance is the messages in the system logs which may indicate a real problem:

I'm seeing the following every reboot:

Jan 17 01:02:18 ze udev-configure-printer: Device vendor/product is 05AC:9122
Jan 17 01:02:18 ze udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jan 17 01:02:18 ze udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.2

Jan 17 01:02:18 ze udev-configure-printer: Device vendor/product is 05AC:921E
Jan 17 01:02:18 ze udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jan 17 01:02:18 ze udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.7/usb2

Jan 17 01:02:18 ze udev-configure-printer: Device vendor/product is 1D6B:0002
Jan 17 01:02:18 ze udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jan 17 01:02:18 ze udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.2/usb8/8-1

[many more similar triplets of lines omitted]

I'm also seeing 8 of these (instead of the explicit paths) on every reboot:

Jan 17 01:02:18 ze udev-configure-printer: Failed to get parent

HTH

Revision history for this message

jellono (jellono) wrote on 2010-01-18:

#6

Download full text (7.1 KiB)

I am having the same Problem New Intell Quad core 64 bit machine...

Nothing attached to the firewire at this time..

Keeps throwing...

Jan 18 08:25:13 m3 udev-configure-printer: Failed to get parent
Jan 18 08:25:13 m3 udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1a.7/usb1
Jan 18 08:25:13 m3 udev-configure-printer: Device vendor/product is 1D6B:0002
Jan 18 08:25:13 m3 udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jan 18 08:25:13 m3 udev-configure-printer: Failed to get parent

Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz

~/Desktop$ lspci -v

00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>
        Kernel modules: intel-agp

00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fa000000-febfffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network Connection (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, fast devsel, latency 0, IRQ 26
        Memory at f9ec0000 (32-bit, non-prefetchable) [size=128K]
        Memory at f9efd000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at c080 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: e1000e
        Kernel modules: e1000e

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at c400 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at c480 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 18
        Memory at f9efec00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at f9ef4000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA In...

I am having the same Problem New Intell Quad core 64 bit machine...

Nothing attached to the firewire at this time..

Keeps throwing...

Jan 18 08:25:13 m3 udev-configure-printer: Failed to get parent
Jan 18 08:25:13 m3 udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1a.7/usb1
Jan 18 08:25:13 m3 udev-configure-printer: Device vendor/product is 1D6B:0002
Jan 18 08:25:13 m3 udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jan 18 08:25:13 m3 udev-configure-printer: Failed to get parent

Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz

~/Desktop$ lspci -v

00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>
        Kernel modules: intel-agp

00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fa000000-febfffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network Connection (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, fast devsel, latency 0, IRQ 26
        Memory at f9ec0000 (32-bit, non-prefetchable) [size=128K]
        Memory at f9efd000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at c080 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: e1000e
        Kernel modules: e1000e

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at c400 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at c480 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 18
        Memory at f9efec00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at f9ef4000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 23
        I/O ports at c800 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at c880 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at cc00 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at d000 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at f9eff800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        Memory behind bridge: f9f00000-f9ffffff
        Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 0
        Capabilities: <access denied>
        Kernel modules: iTCO_wdt

00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 25
        I/O ports at d880 [size=8]
        I/O ports at d800 [size=4]
        I/O ports at d480 [size=8]
        I/O ports at d400 [size=4]
        I/O ports at d080 [size=32]
        Memory at f9eff000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: medium devsel, IRQ 5
        Memory at f9effc00 (64-bit, non-prefetchable) [size=256]
        I/O ports at 0400 [size=32]
        Kernel modules: i2c-i801

01:05.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 70) (prog-if 10)
        Subsystem: Hewlett-Packard Company Device 2a69
        Flags: bus master, medium devsel, latency 64, IRQ 20
        Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: ohci1394
        Kernel modules: firewire-ohci, ohci1394

02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
        Subsystem: Device 19f1:0a94
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
        I/O ports at ec00 [size=128]
        [virtual] Expansion ROM at febe0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: nvidia
        Kernel modules: nvidia, nvidiafb

Revision history for this message

T McCool (tjmcwiz) wrote on 2010-01-30:

#7

Same type of messages within /var/log/syslog for a Levovo R61i with a network attached HP Color LaserJet Printer cp1518ni. Printing works but log contains similar warnings:

-----begin of messages
Jan 29 22:31:10 moerder udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jan 29 22:31:10 moerder udev-configure-printer: Failed to get parent
Jan 29 22:31:10 moerder udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1a.1/usb4
Jan 29 22:31:10 moerder udev-configure-printer: Device vendor/product is 1D6B:0001
Jan 29 22:31:10 moerder udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jan 29 22:31:10 moerder udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1a.7/usb1
Jan 29 22:31:10 moerder udev-configure-printer: Device vendor/product is 1D6B:0002
Jan 29 22:31:10 moerder udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jan 29 22:31:10 moerder udev-configure-printer: Failed to get parent
-----truncated

Version of Linux: Linux 2.6.31-17-generic

Revision history for this message

Ipeacocks (ipeacocks) wrote on 2010-03-10:

#8

i have this problem too on my HP D1560. what this could be related?

Revision history for this message

Neill_R (neill-rutherford) wrote on 2010-04-14:

#9

Download full text (5.7 KiB)

I am having this problem too on 2.6.32-20-generic HO office jet G55 see Power off power on messages at bottom of this comment

Apr 14 13:37:28 HPlaptop1 ddclient[1092]: SUCCESS: updating ...
Apr 14 13:37:53 HPlaptop1 kernel: [ 349.931454] usb 1-2.2: USB disconnect, address 11
Apr 14 13:37:53 HPlaptop1 kernel: [ 349.938383] usblp0: removed
Apr 14 13:37:53 HPlaptop1 udev-configure-printer: remove /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2
Apr 14 13:37:58 HPlaptop1 kernel: [ 354.097702] usb 1-2.2: new full speed USB device using uhci_hcd and address 12
Apr 14 13:37:58 HPlaptop1 kernel: [ 354.240751] usb 1-2.2: configuration #1 chosen from 1 choice
Apr 14 13:37:58 HPlaptop1 kernel: [ 354.249900] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 3 vid 0x03F0 pid 0x0011
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: add /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2/1-2.2:1.0
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: Device vendor/product is 03F0:0011
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: failed to claim interface
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: invalid or missing IEEE 1284 Device ID
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: add /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2/1-2.2:1.0/usb/lp0
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: MFG:Hewlett-Packard MDL:OfficeJet G55 SERN:SGE08EGCYGVL serial:SGE08EGCYGVL
Apr 14 13:37:59 HPlaptop1 hp[2322]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Apr 14 13:38:00 HPlaptop1 python: io/hpmud/pp.c 627: unable to read device-id ret=-1
Apr 14 13:38:01 HPlaptop1 udev-configure-printer: SERN fields match
Apr 14 13:38:01 HPlaptop1 udev-configure-printer: URI match: usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL
Apr 14 13:38:01 HPlaptop1 udev-configure-printer: About to add queue for usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL
Apr 14 13:38:01 HPlaptop1 udev-add-printer: add_queue: URIs=['usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL']
Apr 14 13:38:59 HPlaptop1 udev-add-printer: PPD: drv:///hpijs.drv/hp-officejet_g55-hpijs.ppd; Status: 0
Apr 14 13:40:04 HPlaptop1 AptDaemon: INFO: Quiting due to inactivity
Apr 14 13:40:04 HPlaptop1 AptDaemon: INFO: Shutdown was requested
Apr 14 13:44:17 HPlaptop1 kernel: [ 733.232981] Inbound IN=hso0 OUT= MAC= SRC=222.208.183.218 DST=89.194.74.158 LEN=40 TOS=0x00 PREC=0x00 TTL=113 ID=256 DF PROTO=TCP SPT=12200 DPT=8000 WINDOW=8192 RES=0x00 SYN URGP=0

power off then power on

Apr 14 14:16:48 HPlaptop1 kernel: [ 2684.428536] usb 1-2.2: USB disconnect, address 12
Apr 14 14:16:48 HPlaptop1 kernel: [ 2684.429293] usblp0: removed
Apr 14 14:16:50 HPlaptop1 udev-configure-printer: remove /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2
Apr 14 14:16:50 HPlaptop1 udev-configure-printer: URI of print queue: usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL, normalized: officejet g55 serial sge08egcygvl
Apr 14 14:16:50 HPlaptop1 udev-configure-printer: URI of detected printer: usb://HP...

I am having this problem too on 2.6.32-20-generic HO office jet G55 see Power off power on messages at bottom of this comment

Apr 14 13:37:28 HPlaptop1 ddclient[1092]: SUCCESS:  updating ...
Apr 14 13:37:53 HPlaptop1 kernel: [  349.931454] usb 1-2.2: USB disconnect, address 11
Apr 14 13:37:53 HPlaptop1 kernel: [  349.938383] usblp0: removed
Apr 14 13:37:53 HPlaptop1 udev-configure-printer: remove /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2
Apr 14 13:37:58 HPlaptop1 kernel: [  354.097702] usb 1-2.2: new full speed USB device using uhci_hcd and address 12
Apr 14 13:37:58 HPlaptop1 kernel: [  354.240751] usb 1-2.2: configuration #1 chosen from 1 choice
Apr 14 13:37:58 HPlaptop1 kernel: [  354.249900] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 3 vid 0x03F0 pid 0x0011
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: add /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2/1-2.2:1.0
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: Device vendor/product is 03F0:0011
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: failed to claim interface
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: invalid or missing IEEE 1284 Device ID
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: add /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2/1-2.2:1.0/usb/lp0
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2
Apr 14 13:37:58 HPlaptop1 udev-configure-printer: MFG:Hewlett-Packard MDL:OfficeJet G55 SERN:SGE08EGCYGVL serial:SGE08EGCYGVL
Apr 14 13:37:59 HPlaptop1 hp[2322]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Apr 14 13:38:00 HPlaptop1 python: io/hpmud/pp.c 627: unable to read device-id ret=-1
Apr 14 13:38:01 HPlaptop1 udev-configure-printer: SERN fields match
Apr 14 13:38:01 HPlaptop1 udev-configure-printer: URI match: usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL
Apr 14 13:38:01 HPlaptop1 udev-configure-printer: About to add queue for usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL
Apr 14 13:38:01 HPlaptop1 udev-add-printer: add_queue: URIs=['usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL']
Apr 14 13:38:59 HPlaptop1 udev-add-printer: PPD: drv:///hpijs.drv/hp-officejet_g55-hpijs.ppd; Status: 0
Apr 14 13:40:04 HPlaptop1 AptDaemon: INFO: Quiting due to inactivity
Apr 14 13:40:04 HPlaptop1 AptDaemon: INFO: Shutdown was requested
Apr 14 13:44:17 HPlaptop1 kernel: [  733.232981] Inbound IN=hso0 OUT= MAC= SRC=222.208.183.218 DST=89.194.74.158 LEN=40 TOS=0x00 PREC=0x00 TTL=113 ID=256 DF PROTO=TCP SPT=12200 DPT=8000 WINDOW=8192 RES=0x00 SYN URGP=0

power off then  power on

Apr 14 14:16:48 HPlaptop1 kernel: [ 2684.428536] usb 1-2.2: USB disconnect, address 12
Apr 14 14:16:48 HPlaptop1 kernel: [ 2684.429293] usblp0: removed
Apr 14 14:16:50 HPlaptop1 udev-configure-printer: remove /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2
Apr 14 14:16:50 HPlaptop1 udev-configure-printer: URI of print queue: usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL, normalized: officejet g55 serial sge08egcygvl
Apr 14 14:16:50 HPlaptop1 udev-configure-printer: URI of detected printer: usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL, normalized: officejet g55 serial sge08egcygvl
Apr 14 14:16:50 HPlaptop1 udev-configure-printer: Queue ipp://localhost:631/printers/OfficeJet-G55 has matching device URI
Apr 14 14:16:50 HPlaptop1 udev-configure-printer: Disabled printer ipp://localhost:631/printers/OfficeJet-G55 as the corresponding device was unplugged or turned off
Apr 14 14:17:01 HPlaptop1 CRON[3840]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)

POWER ON

Apr 14 14:17:21 HPlaptop1 kernel: [ 2717.773974] usb 1-2.2: new full speed USB device using uhci_hcd and address 13
Apr 14 14:17:21 HPlaptop1 kernel: [ 2717.918260] usb 1-2.2: configuration #1 chosen from 1 choice
Apr 14 14:17:21 HPlaptop1 kernel: [ 2717.930984] usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 3 vid 0x03F0 pid 0x0011
Apr 14 14:17:21 HPlaptop1 udev-configure-printer: add /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2/1-2.2:1.0
Apr 14 14:17:21 HPlaptop1 udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2
Apr 14 14:17:21 HPlaptop1 udev-configure-printer: Device vendor/product is 03F0:0011
Apr 14 14:17:21 HPlaptop1 udev-configure-printer: failed to claim interface
Apr 14 14:17:21 HPlaptop1 udev-configure-printer: invalid or missing IEEE 1284 Device ID
Apr 14 14:17:21 HPlaptop1 udev-configure-printer: add /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2/1-2.2:1.0/usb/lp0
Apr 14 14:17:21 HPlaptop1 udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2.2
Apr 14 14:17:21 HPlaptop1 udev-configure-printer: MFG:Hewlett-Packard MDL:OfficeJet G55 SERN:SGE08EGCYGVL serial:SGE08EGCYGVL
Apr 14 14:17:24 HPlaptop1 hp[3871]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Apr 14 14:17:25 HPlaptop1 udev-configure-printer: SERN fields match
Apr 14 14:17:25 HPlaptop1 udev-configure-printer: URI match: usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL
Apr 14 14:17:25 HPlaptop1 udev-configure-printer: Consider also queues with "/usb/lp0" or "/usblp0" in their URIs as matching
Apr 14 14:17:25 HPlaptop1 udev-configure-printer: URI of print queue: usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL, normalized: officejet g55 serial sge08egcygvl
Apr 14 14:17:25 HPlaptop1 udev-configure-printer: URI of detected printer: usb://HP/OfficeJet%20G55?serial=SGE08EGCYGVL, normalized: officejet g55 serial sge08egcygvl
Apr 14 14:17:25 HPlaptop1 udev-configure-printer: Queue ipp://localhost:631/printers/OfficeJet-G55 has matching device URI
Apr 14 14:17:25 HPlaptop1 udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/OfficeJet-G55

Revision history for this message

Ipeacocks (ipeacocks) wrote on 2010-04-15:

#10

ubuntu 10.04 beta2 also have this bug? Is it bad hp drivers?

Revision history for this message

Ipeacocks (ipeacocks) wrote on 2010-04-15:

#11

*ubuntu 10.04 beta2 also have this bug!

Revision history for this message

Chris McClelland (prophet36) wrote on 2011-08-19:

#12

Not sure it was the same problem you guys are facing, but I fixed it by removing usblp from the kernel, like this:

http://www.makestuff.eu/wordpress/?p=1747

Revision history for this message

gf (gf-interlinks-deactivatedaccount) wrote on 2018-09-24:

#13

Hello Starslights,
Thank you for submitting this bug and reporting a problem with system-config-printer. You made this bug report some time ago and Ubuntu has been updated since then.

Could you confirm that this is no longer a problem and that we can close the bug report?
If it is still a problem, are you still interested in finding a solution to this bug?
If you are, could you let us know, and in the current version, run the following (only once):
apport-collect BUGNUMBER
and upload the updated logs and and any other logs that are relevant for this particular issue.

Thank you again for helping make Ubuntu better.
G
[Ubuntu Bug Squad volunteer triager]

Changed in system-config-printer (Ubuntu):
status:	New → Incomplete

Revision history for this message

Launchpad Janitor (janitor) wrote on 2018-11-24:

#14

[Expired for system-config-printer (Ubuntu) because there has been no activity for 60 days.]

Changed in system-config-printer (Ubuntu):
status:	Incomplete → Expired

Ubuntu
system-config-printer package

udev-configure-printer /invalid or missing IEEE 1284 Device ID

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntusystem-config-printer package

udev-configure-printer /invalid or missing IEEE 1284 Device ID

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntu
system-config-printer package