[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-36-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #63-Ubuntu SMP Wed Sep 3 21:30:07 UTC 2014 (Ubuntu 3.13.0-36.63-generic 3.13.11.6) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=2d342307-e5cc-4c35-826a-254a2e85fe33 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bc6bffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc6c0000-0x00000000bcebffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bcec0000-0x00000000bcfbffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcfc0000-0x00000000bcffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP ProBook 4530s/167C, BIOS 68SRR Ver. F.09 05/13/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x13f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 4 base 0BD800000 mask FFF800000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 13F800000 mask FFF800000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13f600000-0x13f7fffff] [ 0.000000] [mem 0x13f600000-0x13f7fffff] page 2M [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13f5fffff] [ 0.000000] [mem 0x13c000000-0x13f5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbc6bffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbc5fffff] page 2M [ 0.000000] [mem 0xbc600000-0xbc6bffff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbcfff000-0xbcffffff] [ 0.000000] [mem 0xbcfff000-0xbcffffff] page 4k [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35b5e000-0x36da6fff] [ 0.000000] ACPI: RSDP 00000000000f2f60 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 00000000bcffe120 000074 (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP 00000000bcffc000 0000F4 (v03 HPQOEM 167C 0000000F HP 00000001) [ 0.000000] ACPI: DSDT 00000000bcfd3000 0237BB (v02 HPQOEM 167C 00000001 INTL 20060912) [ 0.000000] ACPI: FACS 00000000bcfb9000 000040 [ 0.000000] ACPI: HPET 00000000bcffb000 000038 (v01 HPQOEM 167C 00000001 HP 00000001) [ 0.000000] ACPI: APIC 00000000bcffa000 0000BC (v01 HPQOEM 167C 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 00000000bcff9000 00003C (v01 HPQOEM 167C 00000001 HP 00000001) [ 0.000000] ACPI: ASF! 00000000bcff8000 0000A5 (v32 HPQOEM 167C 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 00000000bcfd0000 000266 (v01 HPQOEM SataAhci 00001000 INTL 20060912) [ 0.000000] ACPI: SSDT 00000000bcfcf000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912) [ 0.000000] ACPI: SLIC 00000000bcfce000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 00000000bcfcd000 000918 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT 00000000bcfcc000 0009B1 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f7fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13f7fffff] [ 0.000000] NODE_DATA [mem 0x13f7f8000-0x13f7fcfff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13f7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xbc6bffff] [ 0.000000] node 0: [mem 0xbcfff000-0xbcffffff] [ 0.000000] node 0: [mem 0x100000000-0x13f7fffff] [ 0.000000] On node 0 totalpages: 1031774 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 157 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11996 pages used for memmap [ 0.000000] DMA32 zone: 767681 pages, LIFO batch:31 [ 0.000000] Normal zone: 4064 pages used for memmap [ 0.000000] Normal zone: 260096 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc6c0000-0xbcebffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcec0000-0xbcfbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcfc0000-0xbcffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xbfa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013f400000 s86336 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1015493 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=2d342307-e5cc-4c35-826a-254a2e85fe33 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3958644K/4127096K available (7373K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 168452K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2095.296 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.59 BogoMIPS (lpj=8381184) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000029] Security Framework initialized [ 0.000050] AppArmor: AppArmor initialized [ 0.000052] Yama: becoming mindful. [ 0.000410] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001464] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001912] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001918] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002137] Initializing cgroup subsys memory [ 0.002144] Initializing cgroup subsys devices [ 0.002146] Initializing cgroup subsys freezer [ 0.002148] Initializing cgroup subsys blkio [ 0.002149] Initializing cgroup subsys perf_event [ 0.002151] Initializing cgroup subsys hugetlb [ 0.002177] CPU: Physical Processor ID: 0 [ 0.002179] CPU: Processor Core ID: 0 [ 0.002184] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002184] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002186] mce: CPU supports 7 MCE banks [ 0.002198] CPU0: Thermal monitoring enabled (TM1) [ 0.002208] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.002208] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002208] tlb_flushall_shift: 5 [ 0.002349] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000) [ 0.004042] ACPI: Core revision 20131115 [ 0.011464] ACPI: All ACPI Tables successfully acquired [ 0.025150] ftrace: allocating 28537 entries in 112 pages [ 0.041879] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081589] smpboot: CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz (fam: 06, model: 2a, stepping: 07) [ 0.081597] TSC deadline timer enabled [ 0.081609] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.081617] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.081619] ... version: 3 [ 0.081620] ... bit width: 48 [ 0.081621] ... generic registers: 4 [ 0.081623] ... value mask: 0000ffffffffffff [ 0.081624] ... max period: 0000ffffffffffff [ 0.081625] ... fixed-purpose events: 3 [ 0.081626] ... event mask: 000000070000000f [ 0.083426] x86: Booting SMP configuration: [ 0.096674] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.083428] .... node #0, CPUs: #1 #2 #3 [ 0.123184] x86: Booted up 1 node, 4 CPUs [ 0.123188] smpboot: Total of 4 processors activated (16762.36 BogoMIPS) [ 0.126821] devtmpfs: initialized [ 0.129477] EVM: security.selinux [ 0.129479] EVM: security.SMACK64 [ 0.129480] EVM: security.ima [ 0.129481] EVM: security.capability [ 0.129530] PM: Registering ACPI NVS region [mem 0xbcec0000-0xbcfbffff] (1048576 bytes) [ 0.130467] pinctrl core: initialized pinctrl subsystem [ 0.130525] regulator-dummy: no parameters [ 0.130557] RTC time: 17:59:59, date: 10/04/14 [ 0.130594] NET: Registered protocol family 16 [ 0.130701] cpuidle: using governor ladder [ 0.130703] cpuidle: using governor menu [ 0.130742] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.130744] ACPI: bus type PCI registered [ 0.130746] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.130809] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.130812] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.151568] PCI: Using configuration type 1 for base access [ 0.151726] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.151728] mtrr: probably your BIOS does not setup all CPUs. [ 0.151729] mtrr: corrected configuration. [ 0.152523] bio: create slab at 0 [ 0.152674] ACPI: Added _OSI(Module Device) [ 0.152676] ACPI: Added _OSI(Processor Device) [ 0.152677] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152679] ACPI: Added _OSI(Processor Aggregator Device) [ 0.156510] ACPI: Executed 1 blocks of module-level executable AML code [ 0.167317] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.192514] ACPI: SSDT 00000000bce69718 00069C (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.192963] ACPI: Dynamic OEM Table Load: [ 0.192965] ACPI: SSDT (null) 00069C (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.195577] ACPI: SSDT 00000000bce6aa98 000303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.196053] ACPI: Dynamic OEM Table Load: [ 0.196055] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.199447] ACPI: SSDT 00000000bce68d98 000119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.199890] ACPI: Dynamic OEM Table Load: [ 0.199892] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.644447] ACPI: Interpreter enabled [ 0.644455] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.644460] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.644474] ACPI: (supports S0 S3 S4 S5) [ 0.644476] ACPI: Using IOAPIC for interrupt routing [ 0.644499] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.644663] ACPI: No dock devices found. [ 0.645782] ACPI: Power Resource [APPR] (off) [ 0.652217] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.652224] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.653769] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.654475] PCI host bridge to bus 0000:00 [ 0.654478] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.654480] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.654482] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.654484] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.654486] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff] [ 0.654488] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff] [ 0.654490] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] [ 0.654498] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.654585] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.654597] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit] [ 0.654604] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.654609] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.654711] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.654737] pci 0000:00:16.0: reg 0x10: [mem 0xd4904000-0xd490400f 64bit] [ 0.654818] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.654902] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.654926] pci 0000:00:1a.0: reg 0x10: [mem 0xd4909000-0xd49093ff] [ 0.655020] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.655066] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.655103] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.655121] pci 0000:00:1b.0: reg 0x10: [mem 0xd4900000-0xd4903fff 64bit] [ 0.655193] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.655270] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.655355] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.655430] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.655513] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.655560] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.655591] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.655674] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.655720] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.655751] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.655834] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.655880] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.655916] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 0.656000] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.656047] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.656087] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.656111] pci 0000:00:1d.0: reg 0x10: [mem 0xd4908000-0xd49083ff] [ 0.656206] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.656250] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.656282] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.656459] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.656480] pci 0000:00:1f.2: reg 0x10: [io 0x5068-0x506f] [ 0.656489] pci 0000:00:1f.2: reg 0x14: [io 0x5074-0x5077] [ 0.656498] pci 0000:00:1f.2: reg 0x18: [io 0x5060-0x5067] [ 0.656507] pci 0000:00:1f.2: reg 0x1c: [io 0x5070-0x5073] [ 0.656515] pci 0000:00:1f.2: reg 0x20: [io 0x5040-0x505f] [ 0.656524] pci 0000:00:1f.2: reg 0x24: [mem 0xd4907000-0xd49077ff] [ 0.656573] pci 0000:00:1f.2: PME# supported from D3hot [ 0.656696] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.656703] pci 0000:00:1c.0: bridge window [mem 0xd4800000-0xd48fffff] [ 0.656794] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 0.656799] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 0.656803] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.656936] pci 0000:23:00.0: [197b:2392] type 00 class 0x088000 [ 0.656963] pci 0000:23:00.0: reg 0x10: [mem 0xd4703000-0xd47030ff] [ 0.657070] pci 0000:23:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.657238] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501 [ 0.657265] pci 0000:23:00.2: reg 0x10: [mem 0xd4702000-0xd47020ff] [ 0.657531] pci 0000:23:00.3: [197b:2393] type 00 class 0x088000 [ 0.657558] pci 0000:23:00.3: reg 0x10: [mem 0xd4701000-0xd47010ff] [ 0.663976] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 0.663990] pci 0000:00:1c.2: bridge window [mem 0xd4700000-0xd47fffff] [ 0.664135] pci 0000:24:00.0: [168c:002b] type 00 class 0x028000 [ 0.664165] pci 0000:24:00.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit] [ 0.664299] pci 0000:24:00.0: supports D1 [ 0.664300] pci 0000:24:00.0: PME# supported from D0 D1 D3hot [ 0.664340] pci 0000:24:00.0: System wakeup disabled by ACPI [ 0.671954] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 0.671968] pci 0000:00:1c.3: bridge window [mem 0xd4600000-0xd46fffff] [ 0.672131] pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000 [ 0.672153] pci 0000:25:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.672188] pci 0000:25:00.0: reg 0x18: [mem 0xd4404000-0xd4404fff 64bit pref] [ 0.672210] pci 0000:25:00.0: reg 0x20: [mem 0xd4400000-0xd4403fff 64bit pref] [ 0.672305] pci 0000:25:00.0: supports D1 D2 [ 0.672307] pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.672348] pci 0000:25:00.0: System wakeup disabled by ACPI [ 0.679968] pci 0000:00:1c.5: PCI bridge to [bus 25] [ 0.679978] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.679987] pci 0000:00:1c.5: bridge window [mem 0xd4500000-0xd45fffff] [ 0.680001] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 0.680080] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.680797] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.680851] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.680901] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.680951] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.681002] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.681052] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.681102] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.681152] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.681544] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.681551] ACPI: \_SB_.PCI0: notify handler is installed [ 0.681612] Found 1 acpi root devices [ 0.681655] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.681745] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.681749] vgaarb: loaded [ 0.681750] vgaarb: bridge control possible 0000:00:02.0 [ 0.681912] SCSI subsystem initialized [ 0.681982] libata version 3.00 loaded. [ 0.682001] ACPI: bus type USB registered [ 0.682018] usbcore: registered new interface driver usbfs [ 0.682026] usbcore: registered new interface driver hub [ 0.682048] usbcore: registered new device driver usb [ 0.682155] PCI: Using ACPI for IRQ routing [ 0.689077] PCI: pci_cache_line_size set to 64 bytes [ 0.689138] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.689140] e820: reserve RAM buffer [mem 0xbc6c0000-0xbfffffff] [ 0.689142] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff] [ 0.689144] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff] [ 0.689230] NetLabel: Initializing [ 0.689231] NetLabel: domain hash size = 128 [ 0.689232] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.689246] NetLabel: unlabeled traffic allowed by default [ 0.689303] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.689309] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.692350] Switched to clocksource hpet [ 0.697091] AppArmor: AppArmor Filesystem Enabled [ 0.697120] pnp: PnP ACPI init [ 0.697132] ACPI: bus type PNP registered [ 0.697301] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.697305] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 0.697307] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.697309] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved [ 0.697311] system 00:00: [mem 0xbfa00000-0xbfa00fff] has been reserved [ 0.697314] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.697316] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.697318] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.697320] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.697322] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.697326] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.697394] pnp 00:01: [dma 4] [ 0.697414] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.697436] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.697487] system 00:03: [io 0xfe00-0xfe0f] has been reserved [ 0.697490] system 00:03: [io 0xfe80-0xfe8f] has been reserved [ 0.697492] system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.697495] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.697599] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.697631] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.697670] system 00:06: [io 0x0200-0x027f] has been reserved [ 0.697672] system 00:06: [io 0x1000-0x100f] has been reserved [ 0.697674] system 00:06: [io 0xffff] has been reserved [ 0.697676] system 00:06: [io 0xffff] has been reserved [ 0.697678] system 00:06: [io 0x0400-0x047f] could not be reserved [ 0.697681] system 00:06: [io 0x0500-0x057f] has been reserved [ 0.697683] system 00:06: [io 0xef80-0xef9f] has been reserved [ 0.697685] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.697713] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.697835] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.697861] pnp 00:09: Plug and Play ACPI device, IDs SYN0185 SYN0100 SYN0002 PNP0f13 (active) [ 0.698092] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.698265] pnp: PnP ACPI: found 11 devices [ 0.698266] ACPI: bus type PNP unregistered [ 0.704560] pci 0000:23:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.704583] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 [ 0.704610] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.704615] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 0.704618] pci 0000:00:1c.2: BAR 15: assigned [mem 0xbfd00000-0xbfdfffff pref] [ 0.704620] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.704627] pci 0000:00:1c.0: bridge window [mem 0xd4800000-0xd48fffff] [ 0.704637] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 0.704640] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 0.704646] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.704650] pci 0000:00:1c.1: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 0.704658] pci 0000:23:00.0: BAR 6: assigned [mem 0xbfd00000-0xbfd0ffff pref] [ 0.704660] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 0.704666] pci 0000:00:1c.2: bridge window [mem 0xd4700000-0xd47fffff] [ 0.704671] pci 0000:00:1c.2: bridge window [mem 0xbfd00000-0xbfdfffff pref] [ 0.704677] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 0.704683] pci 0000:00:1c.3: bridge window [mem 0xd4600000-0xd46fffff] [ 0.704691] pci 0000:00:1c.5: PCI bridge to [bus 25] [ 0.704695] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.704701] pci 0000:00:1c.5: bridge window [mem 0xd4500000-0xd45fffff] [ 0.704705] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 0.704713] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.704715] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.704717] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.704719] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff] [ 0.704721] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff] [ 0.704723] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff] [ 0.704725] pci_bus 0000:01: resource 1 [mem 0xd4800000-0xd48fffff] [ 0.704727] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff] [ 0.704729] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff] [ 0.704731] pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 0.704733] pci_bus 0000:23: resource 1 [mem 0xd4700000-0xd47fffff] [ 0.704735] pci_bus 0000:23: resource 2 [mem 0xbfd00000-0xbfdfffff pref] [ 0.704737] pci_bus 0000:24: resource 1 [mem 0xd4600000-0xd46fffff] [ 0.704739] pci_bus 0000:25: resource 0 [io 0x2000-0x2fff] [ 0.704741] pci_bus 0000:25: resource 1 [mem 0xd4500000-0xd45fffff] [ 0.704743] pci_bus 0000:25: resource 2 [mem 0xd4400000-0xd44fffff 64bit pref] [ 0.704768] NET: Registered protocol family 2 [ 0.704923] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.705016] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.705114] TCP: Hash tables configured (established 32768 bind 32768) [ 0.705135] TCP: reno registered [ 0.705144] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.705164] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.705229] NET: Registered protocol family 1 [ 0.705241] pci 0000:00:02.0: Boot video device [ 0.705970] PCI: CLS 64 bytes, default 64 [ 0.706024] Trying to unpack rootfs image as initramfs... [ 1.045262] Freeing initrd memory: 18724K (ffff880035b5e000 - ffff880036da7000) [ 1.045268] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.045271] software IO TLB [mem 0xb86c0000-0xbc6c0000] (64MB) mapped at [ffff8800b86c0000-ffff8800bc6bffff] [ 1.045514] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14 [ 1.045521] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14 [ 1.045530] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14 [ 1.045538] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14 [ 1.045587] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.045589] Scanning for low memory corruption every 60 seconds [ 1.045884] Initialise system trusted keyring [ 1.045930] audit: initializing netlink socket (disabled) [ 1.045941] type=2000 audit(1412445600.032:1): initialized [ 1.075480] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.076507] zbud: loaded [ 1.076678] VFS: Disk quotas dquot_6.5.2 [ 1.076723] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.077139] fuse init (API version 7.22) [ 1.077209] msgmni has been set to 7768 [ 1.077261] Key type big_key registered [ 1.077715] Key type asymmetric registered [ 1.077717] Asymmetric key parser 'x509' registered [ 1.077745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.077784] io scheduler noop registered [ 1.077786] io scheduler deadline registered (default) [ 1.077808] io scheduler cfq registered [ 1.078062] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 1.078263] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 1.078462] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 1.078650] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 1.078836] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X [ 1.078924] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.078929] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 1.078948] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 1.078952] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 1.078970] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 1.078972] pci 0000:23:00.0: Signaling PME through PCIe PME interrupt [ 1.078974] pci 0000:23:00.2: Signaling PME through PCIe PME interrupt [ 1.078976] pci 0000:23:00.3: Signaling PME through PCIe PME interrupt [ 1.078980] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 1.079001] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 1.079002] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt [ 1.079007] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 1.079025] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 1.079027] pci 0000:25:00.0: Signaling PME through PCIe PME interrupt [ 1.079031] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 1.079042] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.079085] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 1c12 ss_vid 103c ss_did 167c [ 1.079120] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 1.079124] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.079159] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.079160] vesafb: scrolling: redraw [ 1.079162] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.079426] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k [ 1.140313] Console: switching to colour frame buffer device 128x48 [ 1.201153] fb0: VESA VGA frame buffer device [ 1.201169] intel_idle: MWAIT substates: 0x21120 [ 1.201170] intel_idle: v0.4 model 0x2A [ 1.201172] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.201276] ipmi message handler version 39.2 [ 1.201378] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.201472] ACPI: AC Adapter [AC] (on-line) [ 1.201684] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 1.201689] ACPI: Sleep Button [SLPB] [ 1.201720] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.201740] ACPI: Lid Switch [LID] [ 1.201770] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.201773] ACPI: Power Button [PWRF] [ 1.227384] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.227389] ACPI: Thermal Zone [CPUZ] (51 C) [ 1.251186] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.251190] ACPI: Thermal Zone [GFXZ] (0 C) [ 1.266084] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.266087] ACPI: Thermal Zone [EXTZ] (26 C) [ 1.280892] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.280895] ACPI: Thermal Zone [LOCZ] (38 C) [ 1.295899] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.295902] ACPI: Thermal Zone [BATZ] (21 C) [ 1.296189] thermal LNXTHERM:05: registered as thermal_zone5 [ 1.296191] ACPI: Thermal Zone [PCHZ] (0 C) [ 1.296286] thermal LNXTHERM:06: registered as thermal_zone6 [ 1.296287] ACPI: Thermal Zone [DM1Z] (0 C) [ 1.296376] thermal LNXTHERM:07: registered as thermal_zone7 [ 1.296377] ACPI: Thermal Zone [DM2Z] (0 C) [ 1.296418] GHES: HEST is not enabled! [ 1.296577] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.298985] Linux agpgart interface v0.103 [ 1.300247] brd: module loaded [ 1.300933] loop: module loaded [ 1.301256] libphy: Fixed MDIO Bus: probed [ 1.301333] tun: Universal TUN/TAP device driver, 1.6 [ 1.301334] tun: (C) 1999-2004 Max Krasnyansky [ 1.301381] PPP generic driver version 2.4.2 [ 1.301416] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.301419] ehci-pci: EHCI PCI platform driver [ 1.301606] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.301612] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.301627] ehci-pci 0000:00:1a.0: debug port 2 [ 1.305539] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.305566] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4909000 [ 1.316748] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.316870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.316873] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.316875] usb usb1: Product: EHCI Host Controller [ 1.316877] usb usb1: Manufacturer: Linux 3.13.0-36-generic ehci_hcd [ 1.316878] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.316993] hub 1-0:1.0: USB hub found [ 1.317000] hub 1-0:1.0: 2 ports detected [ 1.317256] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.317261] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.317273] ehci-pci 0000:00:1d.0: debug port 2 [ 1.321171] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.321181] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4908000 [ 1.332769] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.332910] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.332913] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.332916] usb usb2: Product: EHCI Host Controller [ 1.332918] usb usb2: Manufacturer: Linux 3.13.0-36-generic ehci_hcd [ 1.332919] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.333123] hub 2-0:1.0: USB hub found [ 1.333131] hub 2-0:1.0: 2 ports detected [ 1.333270] ehci-platform: EHCI generic platform driver [ 1.333281] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.333283] ohci-pci: OHCI PCI platform driver [ 1.333293] ohci-platform: OHCI generic platform driver [ 1.333299] uhci_hcd: USB Universal Host Controller Interface driver [ 1.333358] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.335241] i8042: Detected active multiplexing controller, rev 1.1 [ 1.335957] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.335963] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.335987] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.336004] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.336018] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.336335] mousedev: PS/2 mouse device common for all mice [ 1.336595] rtc_cmos 00:07: RTC can wake from S4 [ 1.336740] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.336772] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.336835] device-mapper: uevent: version 1.0.3 [ 1.336911] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.336920] ledtrig-cpu: registered to indicate activity on CPUs [ 1.337018] TCP: cubic registered [ 1.337094] NET: Registered protocol family 10 [ 1.337258] NET: Registered protocol family 17 [ 1.337267] Key type dns_resolver registered [ 1.337572] Loading compiled-in X.509 certificates [ 1.338652] Loaded X.509 cert 'Magrathea: Glacier signing key: 38f3b6c63a85affdfbbe0e53339df8e0c6b6c9d5' [ 1.338664] registered taskstats version 1 [ 1.339787] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.339795] ACPI: Battery Slot [BAT0] (battery present) [ 1.341120] Key type trusted registered [ 1.343051] Key type encrypted registered [ 1.344803] AppArmor: AppArmor sha1 policy hashing enabled [ 1.344806] IMA: No TPM chip found, activating TPM-bypass! [ 1.345173] regulator-dummy: disabling [ 1.345230] Magic number: 2:570:996 [ 1.345282] memory memory39: hash matches [ 1.345328] rtc_cmos 00:07: setting system clock to 2014-10-04 18:00:00 UTC (1412445600) [ 1.345868] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.345870] EDD information not available. [ 1.345906] PM: Hibernation image not present or could not be loaded. [ 1.347507] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000) [ 1.347510] Write protecting the kernel read-only data: 12288k [ 1.349859] Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000) [ 1.351782] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000) [ 1.362227] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.363836] systemd-udevd[123]: starting version 204 [ 1.389764] sdhci: Secure Digital Host Controller Interface driver [ 1.389767] sdhci: Copyright(c) Pierre Ossman [ 1.391370] sdhci-pci 0000:23:00.0: SDHCI controller found [197b:2392] (rev 30) [ 1.391481] sdhci-pci 0000:23:00.0: dummy supplies not allowed [ 1.391483] mmc0: no vqmmc regulator found [ 1.391485] sdhci-pci 0000:23:00.0: dummy supplies not allowed [ 1.391486] mmc0: no vmmc regulator found [ 1.391563] mmc0: SDHCI controller on PCI [0000:23:00.0] using DMA [ 1.391581] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30) [ 1.391638] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface. [ 1.394030] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.394042] r8169 0000:25:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.394261] r8169 0000:25:00.0: irq 45 for MSI/MSI-X [ 1.394412] r8169 0000:25:00.0 eth0: RTL8168e/8111e at 0xffffc9000066c000, 10:1f:74:ef:e0:b1, XID 0c200000 IRQ 45 [ 1.394415] r8169 0000:25:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.401523] ahci 0000:00:1f.2: version 3.0 [ 1.401786] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 1.401827] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.401858] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 1.401863] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 1.413208] scsi0 : ahci [ 1.414847] scsi1 : ahci [ 1.415036] scsi2 : ahci [ 1.416523] scsi3 : ahci [ 1.416796] scsi4 : ahci [ 1.418195] scsi5 : ahci [ 1.418268] ata1: SATA max UDMA/133 abar m2048@0xd4907000 port 0xd4907100 irq 46 [ 1.418274] ata2: SATA max UDMA/133 abar m2048@0xd4907000 port 0xd4907180 irq 46 [ 1.418276] ata3: DUMMY [ 1.418279] ata4: DUMMY [ 1.418281] ata5: DUMMY [ 1.418283] ata6: DUMMY [ 1.629086] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.737055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.740251] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.740411] ata1.00: ATA-8: WDC WD3200BEKT-60PVMT0, 01.01A01, max UDMA/133 [ 1.740417] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.743711] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.743918] ata1.00: configured for UDMA/133 [ 1.744275] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 01.0 PQ: 0 ANSI: 5 [ 1.744425] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.744460] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.744480] sd 0:0:0:0: [sda] Write Protect is off [ 1.744484] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.744509] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.761415] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.761420] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.761783] hub 1-1:1.0: USB hub found [ 1.761893] hub 1-1:1.0: 6 ports detected [ 1.805401] sda: sda1 sda2 sda3 < sda5 sda6 > [ 1.805839] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.873226] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.005545] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.005549] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.005948] hub 2-1:1.0: USB hub found [ 2.005999] hub 2-1:1.0: 6 ports detected [ 2.045165] tsc: Refined TSC clocksource calibration: 2095.240 MHz [ 2.061183] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.065380] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.065397] ata2.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100 [ 2.067667] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.067677] ata2.00: configured for UDMA/100 [ 2.071863] scsi 1:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5 [ 2.077366] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.077743] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.077747] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.077896] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.077975] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.171261] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c [ 2.171271] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.171277] usb 1-1.1: SerialNumber: 00b0ee020689 [ 2.277418] usb 2-1.1: new low-speed USB device number 3 using ehci-pci [ 2.324033] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400, board id: 1397, fw id: 780218 [ 2.370977] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 2.373483] usb 2-1.1: New USB device found, idVendor=2188, idProduct=0ae1 [ 2.373488] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.373492] usb 2-1.1: Product: USB OPTICAL MOUSE [ 2.377452] hidraw: raw HID events driver (C) Jiri Kosina [ 2.381785] usbcore: registered new interface driver usbhid [ 2.381788] usbhid: USB HID core driver [ 2.383470] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input12 [ 2.383596] hid-generic 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.1/input0 [ 2.445604] usb 2-1.4: new high-speed USB device number 4 using ehci-pci [ 2.584526] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 2.586827] usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b230 [ 2.586832] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.586836] usb 2-1.4: Product: HP HD Webcam [Fixed] [ 2.586839] usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd. [ 2.586842] usb 2-1.4: SerialNumber: SN0001 [ 2.661690] usb 2-1.6: new full-speed USB device number 5 using ehci-pci [ 2.733728] usb 2-1.6: device descriptor read/64, error -32 [ 2.930853] usb 2-1.6: New USB device found, idVendor=0cf3, idProduct=3005 [ 2.930864] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.045870] Switched to clocksource tsc [ 3.355141] random: init urandom read with 114 bits of entropy available [ 3.552303] random: nonblocking pool is initialized [ 13.310989] Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k FS [ 13.392974] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.507750] systemd-udevd[305]: starting version 204 [ 13.662152] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X [ 13.663896] [drm] Initialized drm 1.1.0 20060810 [ 13.671689] hp_accel: laptop model unknown, using default axes configuration [ 13.672312] lis3lv02d: 8 bits 3DC sensor found [ 13.705121] wmi: Mapper loaded [ 13.706494] [drm] Memory usable by graphics device = 2048M [ 13.706499] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 13.706502] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 13.706523] Console: switching to colour dummy device 80x25 [ 13.710152] cfg80211: Calling CRDA to update world regulatory domain [ 13.739934] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13 [ 13.745101] lp: driver loaded but no devices found [ 13.763715] i915 0000:00:02.0: irq 48 for MSI/MSI-X [ 13.763729] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.763732] [drm] Driver supports precise vblank timestamp query. [ 13.763805] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 13.766863] Bluetooth: Core ver 2.17 [ 13.766917] NET: Registered protocol family 31 [ 13.766920] Bluetooth: HCI device and connection manager initialized [ 13.766929] Bluetooth: HCI socket layer initialized [ 13.766933] Bluetooth: L2CAP socket layer initialized [ 13.766941] Bluetooth: SCO socket layer initialized [ 13.772934] ppdev: user-space parallel port driver [ 13.775309] usbcore: registered new interface driver btusb [ 13.791975] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 13.791980] [drm] This can cause pipe underruns and display issues. [ 13.791982] [drm] Please upgrade your BIOS to fix this. [ 13.810821] fbcon: inteldrmfb (fb0) is primary device [ 13.879992] ath: EEPROM regdomain: 0x60 [ 13.879993] ath: EEPROM indicates we should expect a direct regpair map [ 13.879995] ath: Country alpha2 being used: 00 [ 13.879996] ath: Regpair used: 0x60 [ 13.887382] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 13.887683] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900107a0000, irq=19 [ 14.044014] input: HP WMI hotkeys as /devices/virtual/input/input14 [ 14.086204] cfg80211: World regulatory domain updated: [ 14.086205] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.086207] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.086208] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.086209] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.086210] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.086211] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.161193] type=1400 audit(1412456413.303:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=393 comm="apparmor_parser" [ 14.161198] type=1400 audit(1412456413.303:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=393 comm="apparmor_parser" [ 14.161202] type=1400 audit(1412456413.303:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=393 comm="apparmor_parser" [ 14.161212] type=1400 audit(1412456413.303:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=378 comm="apparmor_parser" [ 14.161218] type=1400 audit(1412456413.303:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=378 comm="apparmor_parser" [ 14.161221] type=1400 audit(1412456413.303:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=378 comm="apparmor_parser" [ 14.161674] type=1400 audit(1412456413.303:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=393 comm="apparmor_parser" [ 14.161679] type=1400 audit(1412456413.303:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=393 comm="apparmor_parser" [ 14.161690] type=1400 audit(1412456413.303:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=378 comm="apparmor_parser" [ 14.161694] type=1400 audit(1412456413.303:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=378 comm="apparmor_parser" [ 14.265454] Linux video capture interface: v2.00 [ 14.272490] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b230) [ 14.528231] Console: switching to colour frame buffer device 170x48 [ 14.530918] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input15 [ 14.531026] usbcore: registered new interface driver uvcvideo [ 14.531027] USB Video Class driver (1.1.1) [ 14.531079] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 14.531081] i915 0000:00:02.0: registered panic notifier [ 14.554621] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.558969] acpi device:04: registered as cooling_device5 [ 14.559129] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16 [ 14.559254] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 14.559350] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 14.559358] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.559363] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 14.559368] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.559371] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 14.559376] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.559379] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 14.559383] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.559385] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 14.559943] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 14.580502] mute LED gpio 1 polarity 0 [ 14.580670] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 14.580672] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.580674] hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 14.580675] mono: mono_out=0x0 [ 14.580676] inputs: [ 14.580678] Internal Mic=0x11 [ 14.580679] Mic=0xc [ 14.581300] hda_codec: too deep connection for 0x11 [ 14.604740] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 14.604929] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 14.605013] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 14.836625] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 17.060257] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 17.752764] init: failsafe main process (678) killed by TERM signal [ 18.454647] init: cups main process (858) killed by HUP signal [ 18.454666] init: cups main process ended, respawning [ 18.461290] Bluetooth: RFCOMM TTY layer initialized [ 18.461304] Bluetooth: RFCOMM socket layer initialized [ 18.461311] Bluetooth: RFCOMM ver 1.11 [ 18.577888] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.577894] Bluetooth: BNEP filters: protocol multicast [ 18.577904] Bluetooth: BNEP socket layer initialized