[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e6 with crng_init=0 [ 0.000000] Linux version 4.13.0-25-generic (buildd@lgw01-amd64-039) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #29-Ubuntu SMP Mon Jan 8 21:14:41 UTC 2018 (Ubuntu 4.13.0-25.29-generic 4.13.13) [ 0.000000] Command line: file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz debug console=tty0 console=ttyS0,115200n8 --- debug console=tty0 console=ttyS0,115200n8 priority=low [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: No reference (HPET/PMTIMER) available [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] found SMP MP-table at [mem 0x000f6630-0x000f663f] mapped at [ffff899d800f6630] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff899d80099000] 99000 size 24576 [ 0.000000] BRK [0x7692c000, 0x7692cfff] PGTABLE [ 0.000000] BRK [0x7692d000, 0x7692dfff] PGTABLE [ 0.000000] BRK [0x7692e000, 0x7692efff] PGTABLE [ 0.000000] BRK [0x7692f000, 0x7692ffff] PGTABLE [ 0.000000] BRK [0x76930000, 0x76930fff] PGTABLE [ 0.000000] BRK [0x76931000, 0x76931fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7df7f000-0x7ffdffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6450 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000007FFE16EE 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000007FFE0C14 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000007FFE0040 000BD4 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000007FFE0000 000040 [ 0.000000] ACPI: SSDT 0x000000007FFE0C88 0009B6 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x000000007FFE163E 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000007FFE16B6 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffdffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7df54000-0x7df7efff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:7ded4001, primary cpu clock [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ffdffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ffdffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffdffff] [ 0.000000] On node 0 totalpages: 524158 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8128 pages used for memmap [ 0.000000] DMA32 zone: 520160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ffff899dfdc00000 s149784 r8192 d30440 u2097152 [ 0.000000] pcpu-alloc: s149784 r8192 d30440 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 7dc131c0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515945 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz debug console=tty0 console=ttyS0,115200n8 --- debug console=tty0 console=ttyS0,115200n8 priority=low [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2003828K/2096632K available (12300K kernel code, 2481K rwdata, 3996K rodata, 2372K init, 2368K bss, 92804K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 37810 entries in 148 pages [ 0.004000] Hierarchical RCU implementation. [ 0.004000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1. [ 0.004000] Tasks RCU enabled. [ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.004000] NR_IRQS: 524544, nr_irqs: 256, preallocated irqs: 16 [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [ttyS0] enabled [ 0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.004000] hpet clockevent registered [ 0.004011] tsc: Detected 2593.482 MHz processor [ 0.006719] Calibrating delay loop (skipped) preset value.. 5186.96 BogoMIPS (lpj=10373928) [ 0.008015] pid_max: default: 32768 minimum: 301 [ 0.012052] ACPI: Core revision 20170531 [ 0.020450] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.024000] Security Framework initialized [ 0.024012] Yama: becoming mindful. [ 0.028124] AppArmor: AppArmor initialized [ 0.036202] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.042814] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.044061] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.048021] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.052443] mce: CPU supports 10 MCE banks [ 0.056095] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.060008] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.340414] Freeing SMP alternatives memory: 36K [ 0.345277] smpboot: Max logical packages: 1 [ 0.348355] x2apic enabled [ 0.350371] Switched APIC routing to physical x2apic. [ 0.353860] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.356000] APIC calibration not consistent with PM-Timer: 103ms instead of 100ms [ 0.356000] APIC delta adjusted to PM-Timer: 6249692 (6498997) [ 0.356093] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3) [ 0.360501] Performance Events: PMU not available due to virtualization, using software events only. [ 0.364214] Hierarchical SRCU implementation. [ 0.372381] smp: Bringing up secondary CPUs ... [ 0.376007] smp: Brought up 1 node, 1 CPU [ 0.380006] smpboot: Total of 1 processors activated (5186.96 BogoMIPS) [ 0.384673] devtmpfs: initialized [ 0.388116] x86/mm: Memory block size: 128MB [ 0.390838] evm: security.selinux [ 0.392005] evm: security.SMACK64 [ 0.396003] evm: security.SMACK64EXEC [ 0.400004] evm: security.SMACK64TRANSMUTE [ 0.404012] evm: security.SMACK64MMAP [ 0.408003] evm: security.ima [ 0.412004] evm: security.capability [ 0.416253] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.420014] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.424119] pinctrl core: initialized pinctrl subsystem [ 0.428735] RTC time: 11:04:40, date: 01/20/18 [ 0.432319] NET: Registered protocol family 16 [ 0.436367] cpuidle: using governor ladder [ 0.440007] cpuidle: using governor menu [ 0.444012] PCCT header not found. [ 0.448007] ACPI: bus type PCI registered [ 0.452005] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.460288] PCI: Using configuration type 1 for base access [ 0.465527] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.468412] ACPI: Added _OSI(Module Device) [ 0.472005] ACPI: Added _OSI(Processor Device) [ 0.475447] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.476003] ACPI: Added _OSI(Processor Aggregator Device) [ 0.481274] ACPI: Interpreter enabled [ 0.484043] ACPI: (supports S0 S3 S4 S5) [ 0.488004] ACPI: Using IOAPIC for interrupt routing [ 0.492040] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.497033] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.505158] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.508010] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.512008] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.516033] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.524559] acpiphp: Slot [3] registered [ 0.528050] acpiphp: Slot [4] registered [ 0.532040] acpiphp: Slot [5] registered [ 0.536070] acpiphp: Slot [6] registered [ 0.540054] acpiphp: Slot [7] registered [ 0.544047] acpiphp: Slot [8] registered [ 0.546998] acpiphp: Slot [9] registered [ 0.548037] acpiphp: Slot [10] registered [ 0.552063] acpiphp: Slot [11] registered [ 0.555163] acpiphp: Slot [12] registered [ 0.556037] acpiphp: Slot [13] registered [ 0.560037] acpiphp: Slot [14] registered [ 0.564094] acpiphp: Slot [15] registered [ 0.568051] acpiphp: Slot [16] registered [ 0.572039] acpiphp: Slot [17] registered [ 0.576044] acpiphp: Slot [18] registered [ 0.578727] acpiphp: Slot [19] registered [ 0.580037] acpiphp: Slot [20] registered [ 0.584037] acpiphp: Slot [21] registered [ 0.586834] acpiphp: Slot [22] registered [ 0.588079] acpiphp: Slot [23] registered [ 0.592139] acpiphp: Slot [24] registered [ 0.596045] acpiphp: Slot [25] registered [ 0.600038] acpiphp: Slot [26] registered [ 0.604048] acpiphp: Slot [27] registered [ 0.608053] acpiphp: Slot [28] registered [ 0.612081] acpiphp: Slot [29] registered [ 0.616048] acpiphp: Slot [30] registered [ 0.620038] acpiphp: Slot [31] registered [ 0.624034] PCI host bridge to bus 0000:00 [ 0.628006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.632014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.636005] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.640006] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] [ 0.644006] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.648097] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.656462] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.664749] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.673467] pci 0000:00:01.1: reg 0x20: [io 0xc060-0xc06f] [ 0.677565] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.680015] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.684006] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.688003] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.691246] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 [ 0.699000] pci 0000:00:01.2: reg 0x20: [io 0xc040-0xc05f] [ 0.704113] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.708336] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.712024] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.716444] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 [ 0.728040] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref] [ 0.736044] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff] [ 0.752100] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.756930] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.764690] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.769861] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.780010] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.786026] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.788175] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.792217] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.796215] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.800122] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.804687] SCSI subsystem initialized [ 0.808193] libata version 3.00 loaded. [ 0.812326] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.816000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.816004] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.819030] vgaarb: loaded [ 0.820055] ACPI: bus type USB registered [ 0.824056] usbcore: registered new interface driver usbfs [ 0.828016] usbcore: registered new interface driver hub [ 0.832052] usbcore: registered new device driver usb [ 0.836162] EDAC MC: Ver: 3.0.0 [ 0.840554] PCI: Using ACPI for IRQ routing [ 0.844004] PCI: pci_cache_line_size set to 64 bytes [ 0.847018] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.848005] e820: reserve RAM buffer [mem 0x7ffe0000-0x7fffffff] [ 0.852142] NetLabel: Initializing [ 0.854137] NetLabel: domain hash size = 128 [ 0.856009] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.860031] NetLabel: unlabeled traffic allowed by default [ 0.864330] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.868062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.872005] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.881334] clocksource: Switched to clocksource kvm-clock [ 0.914419] VFS: Disk quotas dquot_6.6.0 [ 0.935070] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.948155] AppArmor: AppArmor Filesystem Enabled [ 0.953102] pnp: PnP ACPI init [ 0.955495] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.966254] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.969631] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.972581] pnp 00:03: [dma 2] [ 0.974411] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.979159] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.984446] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.988166] pnp: PnP ACPI: found 6 devices [ 1.005876] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.017502] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.020927] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.024286] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.031559] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window] [ 1.035283] NET: Registered protocol family 2 [ 1.039207] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.045322] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 1.052492] TCP: Hash tables configured (established 16384 bind 16384) [ 1.057122] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.067258] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.071878] NET: Registered protocol family 1 [ 1.075887] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.080415] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.084385] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.122052] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.170090] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.175576] PCI: CLS 0 bytes, default 64 [ 1.178263] Unpacking initramfs... [ 18.416722] Freeing initrd memory: 33156K [ 18.422796] Scanning for low memory corruption every 60 seconds [ 18.427814] audit: initializing netlink subsys (disabled) [ 18.432102] Initialise system trusted keyrings [ 18.435260] Key type blacklist registered [ 18.438344] audit: type=2000 audit(1516446297.648:1): state=initialized audit_enabled=0 res=1 [ 18.459927] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 18.467700] zbud: loaded [ 18.470299] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 18.474287] fuse init (API version 7.26) [ 18.482244] Key type asymmetric registered [ 18.497060] Asymmetric key parser 'x509' registered [ 18.504668] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 18.517214] io scheduler noop registered [ 18.521523] io scheduler deadline registered [ 18.528919] io scheduler cfq registered (default) [ 18.533801] intel_idle: does not run on family 6 model 6 [ 18.546931] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 18.563335] ACPI: Power Button [PWRF] [ 18.570978] GHES: HEST is not enabled! [ 18.576188] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 18.623141] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 18.635238] Linux agpgart interface v0.103 [ 18.641952] loop: module loaded [ 18.647825] ata_piix 0000:00:01.1: version 2.13 [ 18.655440] scsi host0: ata_piix [ 18.677506] scsi host1: ata_piix [ 18.681793] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc060 irq 14 [ 18.689369] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc068 irq 15 [ 18.707746] libphy: Fixed MDIO Bus: probed [ 18.712622] tun: Universal TUN/TAP device driver, 1.6 [ 18.719694] PPP generic driver version 2.4.2 [ 18.767081] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 18.781129] ehci-pci: EHCI PCI platform driver [ 18.787802] ehci-platform: EHCI generic platform driver [ 18.798004] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 18.811508] ohci-pci: OHCI PCI platform driver [ 18.830959] ohci-platform: OHCI generic platform driver [ 18.842209] uhci_hcd: USB Universal Host Controller Interface driver [ 18.864952] ata1.01: NODEV after polling detection [ 18.877607] ata2.01: NODEV after polling detection [ 18.884046] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 18.892049] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 [ 18.895929] ata1.00: 16777216 sectors, multi 16: LBA48 [ 18.901083] ata2.00: configured for MWDMA2 [ 18.928817] ata1.00: configured for MWDMA2 [ 18.934295] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 18.959548] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 18.966179] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: (8.59 GB/8.00 GiB) [ 18.981094] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 18.993265] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 18.997226] sd 0:0:0:0: [sda] Write Protect is off [ 19.000124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.012446] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 19.027412] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 19.030521] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 19.034719] uhci_hcd 0000:00:01.2: detected 2 ports [ 19.037080] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040 [ 19.040302] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.045669] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 19.049881] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.054432] usb usb1: Product: UHCI Host Controller [ 19.064482] usb usb1: Manufacturer: Linux 4.13.0-25-generic uhci_hcd [ 19.075636] usb usb1: SerialNumber: 0000:00:01.2 [ 19.100570] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 19.108063] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 19.120685] sd 0:0:0:0: [sda] Attached SCSI disk [ 19.139984] hub 1-0:1.0: USB hub found [ 19.148118] hub 1-0:1.0: 2 ports detected [ 19.164883] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 19.188684] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.196070] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.208084] mousedev: PS/2 mouse device common for all mice [ 19.212262] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 19.223837] rtc_cmos 00:00: RTC can wake from S4 [ 19.227173] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 19.230845] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 19.234930] i2c /dev entries driver [ 19.241008] device-mapper: uevent: version 1.0.3 [ 19.245905] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 19.263140] hpet1: lost 1 rtc interrupts [ 19.283526] ledtrig-cpu: registered to indicate activity on CPUs [ 19.287235] NET: Registered protocol family 10 [ 19.322791] Segment Routing with IPv6 [ 19.326513] NET: Registered protocol family 17 [ 19.329043] Key type dns_resolver registered [ 19.331599] RAS: Correctable Errors collector initialized. [ 19.334752] registered taskstats version 1 [ 19.338331] Loading compiled-in X.509 certificates [ 19.356251] Loaded X.509 cert 'Build time autogenerated kernel key: ecdf0c3ef21a8b4ca325a4d1db7d45108ca78734' [ 19.368226] zswap: loaded using pool lzo/zbud [ 19.406595] Key type big_key registered [ 19.412640] Key type trusted registered [ 19.450782] Key type encrypted registered [ 19.458260] AppArmor: AppArmor sha1 policy hashing enabled [ 19.467194] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 19.471505] evm: HMAC attrs: 0x1 [ 19.478615] Magic number: 2:151:75 [ 19.481648] rtc_cmos 00:00: setting system clock to 2018-01-20 11:04:59 UTC (1516446299) [ 19.488583] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 19.497171] EDD information not available. [ 19.499688] PM: Hibernation image not present or could not be loaded. [ 19.527600] Freeing unused kernel memory: 2372K [ 19.533763] Write protecting the kernel read-only data: 18432k [ 19.541218] Freeing unused kernel memory: 2024K [ 19.559963] Freeing unused kernel memory: 100K [ 19.571139] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 19.578397] x86/mm: Checking user space page tables [ 19.584315] x86/mm: Checked W+X mappings: passed, no W+X pages found. Loading, please wait... [ 19.704100] systemd-udevd[133]: starting version 235 [ 19.721709] systemd-udevd[134]: hwdb.bin does not exist, please run systemd-hwdb update [ 19.753817] systemd-udevd[134]: Load module index [ 19.780519] systemd-udevd[134]: timestamp of '/lib/systemd/network' changed [ 19.846009] systemd-udevd[134]: Parsed configuration file /lib/systemd/network/99-default.link [ 19.888186] systemd-udevd[134]: Created link configuration context. [ 19.903481] systemd-udevd[134]: timestamp of '/lib/udev/rules.d' changed [ 19.926810] systemd-udevd[134]: Reading rules file: /lib/udev/rules.d/50-firmware.rules [ 19.959641] systemd-udevd[134]: Reading rules file: /lib/udev/rules.d/50-udev-default.rules [ 19.969553] systemd-udevd[134]: Reading rules file: /lib/udev/rules.d/55-dm.rules [ 20.556898] Floppy drive(s): fd0 is 1.44M [ 20.581153] FDC 0 is a S82078B [ 20.644967] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 20.655525] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 20.689094] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4 [ 20.700484] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3 [ 21.062550] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 21.752836] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 21.763565] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 21.790293] e1000 0000:00:03.0 ens3: renamed from eth0 [ 24.322339] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 24.366851] ISO 9660 Extensions: RRIP_1991A [ 24.544348] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25622e98bd3, max_idle_ns: 440795233854 ns [ 24.709756] systemd-udevd[284]: Unload module index [ 24.716575] systemd-udevd[284]: Unloaded link configuration context. [ 26.307178] random: crng init done [ 30.503186] systemd-udevd[134]: Validate module index [ 30.520174] systemd-udevd[134]: Check if link configuration needs reloading. [ 30.564874] systemd-udevd[382]: IMPORT builtin 'hwdb' /lib/udev/rules.d/50-udev-default.rules:14 [ 30.707598] systemd-udevd[383]: passed device to netlink monitor 0x55872e1d8c80 [ 30.728097] systemd-udevd[382]: IMPORT builtin 'hwdb' returned non-zero [ 30.744284] systemd-udevd[384]: passed device to netlink monitor 0x55872e1d9f10 [ 30.760625] systemd-udevd[382]: passed device to netlink monitor 0x55872e1a0590 [ 30.778271] systemd-udevd[387]: IMPORT builtin 'hwdb' /lib/udev/rules.d/50-udev-default.rules:14 [ 30.792916] systemd-udevd[386]: IMPORT builtin 'hwdb' /lib/udev/rules.d/50-udev-default.rules:14 [ 30.801223] systemd-udevd[382]: IMPORT builtin 'hwdb' /lib/udev/rules.d/50-udev-default.rules:14 [ 51.812501] systemd-udevd[134]: Unload module index [ 51.817459] systemd-udevd[134]: Unloaded link configuration context. [ 51.821924] systemd-udevd: 3680 output lines suppressed due to ratelimiting [ 52.236749] ip_tables: (C) 2000-2006 Netfilter Core Team [ 52.277638] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct. [ 52.284633] systemd[1]: Mounting cgroup to /sys/fs/cgroup/net_cls,net_prio of type cgroup with options net_cls,net_prio. [ 52.290498] systemd[1]: Mounting cgroup to /sys/fs/cgroup/pids of type cgroup with options pids. [ 52.296767] systemd[1]: Mounting cgroup to /sys/fs/cgroup/rdma of type cgroup with options rdma. [ 52.302930] systemd[1]: Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio. [ 52.320378] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset. [ 52.327518] systemd[1]: Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory. [ 52.338459] systemd[1]: Mounting cgroup to /sys/fs/cgroup/hugetlb of type cgroup with options hugetlb. [ 52.349479] systemd[1]: Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices. [ 52.354913] systemd[1]: Mounting cgroup to /sys/fs/cgroup/perf_event of type cgroup with options perf_event. Welcome to Ubuntu Bionic Beaver (development branch)! [ 52.742996] systemd-fstab-generator[841]: Parsing /etc/fstab [ 52.828653] systemd-fstab-generator[841]: Found entry what=overlay where=/ type=overlay nofail=no noauto=no [ 52.845135] systemd-sysv-generator[846]: Native unit for acpid.service already exists, skipping. [ 52.870063] systemd-sysv-generator[846]: Native unit for alsa-utils.service already exists, skipping. [ 52.876186] systemd-getty-generator[842]: Automatically adding serial getty for /dev/ttyS0. [ 52.882773] systemd-fstab-generator[841]: Found entry what=tmpfs where=/tmp type=tmpfs nofail=no noauto=no [ 52.893642] systemd-sysv-generator[846]: Native unit for anacron.service already exists, skipping. [ 52.908775] systemd-sysv-generator[846]: Native unit for apparmor.service already exists, skipping. [ 52.917550] systemd-sysv-generator[846]: Cannot find unit apport.service. [ 52.926772] systemd-sysv-generator[846]: Native unit for avahi-daemon.service already exists, skipping. [ 52.973761] systemd-sysv-generator[846]: Native unit for bluetooth.service already exists, skipping. [ 52.980339] systemd-sysv-generator[846]: Native unit for console-setup.service already exists, skipping. [ 52.986170] systemd-sysv-generator[846]: Native unit for cron.service already exists, skipping. [ 53.002255] systemd-sysv-generator[846]: Native unit for cryptdisks.service already exists, skipping. [ 53.039657] systemd-sysv-ge: 119 output lines suppressed due to ratelimiting [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ OK ] Reached target Remote File Systems. [ OK ] Reached target User and Group Name Lookups. [ OK ] Reached target Swap. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Created slice User and Session Slice. [ OK ] Created slice System Slice. Mounting Huge Pages File System... [ 53.321518] systemd[849]: dev-hugepages.mount: Executing: /bin/mount hugetlbfs /dev/hugepages -t hugetlbfs Mounting POSIX Message Queue File System...[ 53.330677] systemd[850]: dev-mqueue.mount: Executing: /bin/mount mqueue /dev/mqueue -t mqueue [ OK ] Listening on Journal Socket. [ OK ] Listening on Device-mapper event daemon FIFOs. Starting Create list of required st…ce nodes for the current kernel... [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on Syslog Socket. [ OK ] Listening on udev Control Socket. Starting Remount Root and Kernel File Systems... [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Listening on Journal Audit Socket. [ OK ] Listening on LVM2 metadata daemon socket. Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. Mounting Kernel Debug File System... Starting Journal Service... Starting Set the console keyboard layout... [ OK ] Reached target Slices. Starting Load Kernel Modules... [ OK ] Created slice system-serial\x2dgetty.slice.[ 53.759444] systemd-journald[856]: Fixed min_use=1.0M max_use=19.9M max_size=2.4M min_size=512.0K keep_free=29.9M n_max_files=100 [ OK ] Listening on udev Kernel Socket. [ 53.804758] systemd-journald[856]: Reserving 4536 entries in hash table. [ 53.820933] systemd-journald[856]: Vacuuming... [ 53.864224] systemd-journald[856]: Vacuuming done, freed 0B of archived journals from /run/log/journal/875f132c9ff341a3b09d1c8976ea2456. Starting udev Coldplug all Devices... Starting Uncomplicated firewall...[ 53.948140] systemd-journald[856]: Flushing /dev/kmsg... [ 54.016578] lp: driver loaded but no devices found [[ 54.133953] ppdev: user-space parallel port driver  OK [ 54.193160] parport_pc 00:04: reported by Plug and Play ACPI ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Huge Pages File System. [ 54.272437] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Remount Root and Kernel File Systems. [ 54.392246] lp0: using parport0 (interrupt-driven). [ OK ] Started Uncomplicated firewall. [ OK ] Started Load Kernel Modules. [ OK ] Started LVM2 metadata daemon. Mounting FUSE Control File System... [ 54.709504] systemd-journald[856]: systemd-journald running as pid 856 [ 54.828359] systemd-journald[856]: Sent READY=1 notification. Starting Apply Kernel Variables...[ 54.869849] systemd-journald[856]: Sent WATCHDOG=1 notification. [ 54.902954] systemd-journald[856]: Successfully sent stream file descriptor to service manager. Mounting Kernel Configuration File System... Starting Load/Save Random Seed... Starting Create Static Device Nodes in /dev... [ OK ] Mounted Kernel Configuration File System. [ OK ] Mounted FUSE Control File System. [ OK ] Started Journal Service. [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. [ OK ] Started Set the console keyboard layout. [ OK ] Started Apply Kernel Variables. [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started udev Coldplug all Devices. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /tmp... Starting Flush Journal to Persistent Storage... [ OK ] Mounted /tmp. [ OK ] Reached target Local File Systems. Starting Set console font and keymap... Starting Tell Plymouth To Write Out Runtime Data... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Set console font and keymap. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Listening on UUID daemon activation socket. [ OK ] Started Message of the Day. [ OK ] Started CUPS Scheduler. [ OK ] Started ACPI Events Check. [ OK ] Listening on CUPS Scheduler. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on ACPID Listen Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Socket activation for snappy daemon. [ OK ] Started systemd-resolved-update-resolvconf.path. [ OK ] Reached target Paths. [ OK ] Reached target System Time Synchronized. [ OK ] Started Trigger anacron every hour. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Timer to automatically refresh installed snaps. [ OK ] Reached target Timers. [ OK ] Listening on Socket activation for snappy daemon. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting LSB: Record successful boot for GRUB... Starting LSB: automatic crash report generation... Starting Accounts Service... Starting Avahi mDNS/DNS-SD Stack... Starting Modem Manager... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started irqbalance daemon. [ OK ] Started Run anacron jobs. Starting System Logging Service... [ OK ] Started ACPI event daemon. [ OK ] Started CUPS Scheduler. [ OK ] Started Make remote CUPS printers available locally. Starting Initialize hardware monitoring sensors... [ OK ] Started Regular background program processing daemon. Starting Login Service... Starting LSB: Speech Dispatcher... Starting Thermal Daemon Service... Starting Network Manager... Starting Ubuntu live CD installer... Starting Disk Manager... Starting Detect the available GPUs and deal with any system changes... Starting Snappy daemon... [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started Thermal Daemon Service. [ OK ] Started Ubuntu live CD installer. [ OK ] Started Initialize hardware monitoring sensors. [ OK ] Started LSB: Speech Dispatcher. [ OK ] Started Network Manager. [ OK ] Started Detect the available GPUs and deal with any system changes. [ OK ] Started LSB: Record successful boot for GRUB. [ OK ] Started LSB: automatic crash report generation. [ OK ] Started Login Service. Starting Network Manager Script Dispatcher Service... Starting Network Manager Wait Online... [ OK ] Reached target Network. Starting Permit User Sessions... [ OK ] Started Unattended Upgrades Shutdown. Starting Network Name Resolution... Starting Authorization Manager... [ OK ] Reached target Printer. [ OK ] Started Snappy daemon. [ OK ] Started Permit User Sessions. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Authorization Manager. [ OK ] Started Accounts Service. [ OK ] Started Modem Manager. [ OK ] Started Disk Manager. Starting Hostname Service... Starting Hold until boot process finishes up... Starting Light Display Manager... [ OK ] Started Hold until boot process finishes up. Starting Set console scheme... [ OK ] Started Set console scheme. [ OK ] Started Light Display Manager. [ OK ] Created slice system-getty.slice. [ OK ] Started Getty on tty1. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Hostname Service. [ OK ] Found device /dev/ttyS0. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started Network Manager Wait Online. [ OK ] Reached target Network is Online. Starting LSB: disk temperature monitoring daemon... Starting Tool to automatically coll… submit kernel crash signatures... [ OK ] Started crash report submission daemon. Ubuntu Bionic Beaver (development branch) xubuntu ttyS0 xubuntu login: ubuntu Password: Login incorrect xubuntu login: xubuntu Password: Login incorrect xubuntu login: xubuntu Password: Login incorrect xubuntu login: xubuntu Password: Welcome to Ubuntu Bionic Beaver (development branch) (GNU/Linux 4.13.0-25-generic x86_64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage 0 packages can be updated. 0 updates are security updates. The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. To run a command as administrator (user "root"), use "sudo ". See "man sudo_root" for details. xubuntu@xubuntu:~$ systemctl status ● xubuntu State: running Jobs: 0 queued Failed: 0 units Since: Sat 2018-01-20 11:05:32 UTC; 4min 19s ago CGroup: / ├─user.slice │ └─user-999.slice │ ├─session-2.scope │ │ ├─1032 /bin/login -p -- │ │ ├─1493 -bash │ │ ├─1508 systemctl status │ │ └─1509 systemctl status │ ├─user@999.service │ │ ├─indicator-messages.service │ │ │ └─1428 /usr/lib/x86_64-linux-gnu/indicator-messages/indicator │ │ ├─gvfs-gphoto2-volume-monitor.service │ │ │ └─1380 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor │ │ ├─at-spi-dbus-bus.service │ │ │ ├─1307 /usr/lib/at-spi2-core/at-spi-bus-launcher │ │ │ ├─1312 /usr/bin/dbus-daemon --config-file=/usr/share/defaults │ │ │ └─1315 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-se │ │ ├─dbus.service lines 1-23  │ │ │ ├─1158 /usr/bin/dbus-daemon --session --address=systemd: --no lines 2-24  │ │ │ ├─1229 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd lines 3-25  │ │ │ ├─1300 /usr/lib/dconf/dconf-service lines 4-26  │ │ │ └─1348 /usr/lib/x86_64-linux-gnu/tumbler-1/tumblerd lines 5-27  │ │ ├─gvfs-udisks2-volume-monitor.service lines 6-28  │ │ │ └─1371 /usr/lib/gvfs/gvfs-udisks2-volume-monitor lines 7-29  │ │ ├─gvfs-metadata.service lines 8-30