[ 0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29 [ 0.000000] Linux version 5.4.0-21-generic (buildd@lcy01-amd64-006) (gcc version 9.3.0 (Ubuntu 9.3.0-8ubuntu1)) #25-Ubuntu SMP Sat Mar 28 13:10:28 UTC 2020 (Ubuntu 5.4.0-21.25-generic 5.4.27) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-21-generic root=UUID=bf90cda0-1b42-4783-bef3-1f9c18237e9d ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff6ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cff70000-0x00000000cff7dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cff7e000-0x00000000cffcffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer P5Q-PRO/P5Q-PRO, BIOS 1004 07/10/2008 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2999.667 MHz processor [ 0.004244] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.004246] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.004250] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.004255] MTRR default type: uncachable [ 0.004256] MTRR fixed ranges enabled: [ 0.004257] 00000-9FFFF write-back [ 0.004258] A0000-BFFFF uncachable [ 0.004258] C0000-DFFFF write-protect [ 0.004259] E0000-EFFFF write-through [ 0.004260] F0000-FFFFF write-protect [ 0.004261] MTRR variable ranges enabled: [ 0.004262] 0 base 000000000 mask E00000000 write-back [ 0.004263] 1 base 200000000 mask FE0000000 write-back [ 0.004264] 2 base 220000000 mask FF0000000 write-back [ 0.004265] 3 base 0D0000000 mask FF0000000 uncachable [ 0.004266] 4 base 0E0000000 mask FE0000000 uncachable [ 0.004267] 5 disabled [ 0.004267] 6 disabled [ 0.004268] 7 disabled [ 0.005578] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.005685] total RAM covered: 8192M [ 0.006200] Found optimal setting for mtrr clean up [ 0.006201] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G [ 0.007475] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.007479] last_pfn = 0xcff70 max_arch_pfn = 0x400000000 [ 0.017703] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.021100] check: Scanning 1 areas for low memory corruption [ 0.021106] BRK [0x1e9201000, 0x1e9201fff] PGTABLE [ 0.021108] BRK [0x1e9202000, 0x1e9202fff] PGTABLE [ 0.021109] BRK [0x1e9203000, 0x1e9203fff] PGTABLE [ 0.021141] BRK [0x1e9204000, 0x1e9204fff] PGTABLE [ 0.021142] BRK [0x1e9205000, 0x1e9205fff] PGTABLE [ 0.021253] BRK [0x1e9206000, 0x1e9206fff] PGTABLE [ 0.021270] BRK [0x1e9207000, 0x1e9207fff] PGTABLE [ 0.021287] BRK [0x1e9208000, 0x1e9208fff] PGTABLE [ 0.021321] BRK [0x1e9209000, 0x1e9209fff] PGTABLE [ 0.021446] RAMDISK: [mem 0x2ddc1000-0x32ed7fff] [ 0.021456] ACPI: Early table checksum verification disabled [ 0.021460] ACPI: RSDP 0x00000000000FB030 000014 (v00 ACPIAM) [ 0.021463] ACPI: RSDT 0x00000000CFF70000 000040 (v01 A_M_I_ OEMRSDT 07000810 MSFT 00000097) [ 0.021469] ACPI: FACP 0x00000000CFF70200 000084 (v02 A_M_I_ OEMFACP 07000810 MSFT 00000097) [ 0.021475] ACPI: DSDT 0x00000000CFF70440 00964B (v01 A1012 A1012001 00000001 INTL 20060113) [ 0.021478] ACPI: FACS 0x00000000CFF7E000 000040 [ 0.021481] ACPI: APIC 0x00000000CFF70390 00006C (v01 A_M_I_ OEMAPIC 07000810 MSFT 00000097) [ 0.021484] ACPI: MCFG 0x00000000CFF70400 00003C (v01 A_M_I_ OEMMCFG 07000810 MSFT 00000097) [ 0.021487] ACPI: OEMB 0x00000000CFF7E040 000081 (v01 A_M_I_ AMI_OEM 07000810 MSFT 00000097) [ 0.021490] ACPI: HPET 0x00000000CFF79A90 000038 (v01 A_M_I_ OEMHPET 07000810 MSFT 00000097) [ 0.021493] ACPI: OSFR 0x00000000CFF79AD0 0000B0 (v01 A_M_I_ OEMOSFR 07000810 MSFT 00000097) [ 0.021497] ACPI: SSDT 0x00000000CFF7EB20 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.021507] ACPI: Local APIC address 0xfee00000 [ 0.021584] No NUMA configuration found [ 0.021585] Faking a node at [mem 0x0000000000000000-0x000000022fffffff] [ 0.021595] NODE_DATA(0) allocated [mem 0x22ffd1000-0x22fffbfff] [ 0.021849] Zone ranges: [ 0.021850] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.021851] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.021852] Normal [mem 0x0000000100000000-0x000000022fffffff] [ 0.021853] Device empty [ 0.021854] Movable zone start for each node [ 0.021857] Early memory node ranges [ 0.021857] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.021858] node 0: [mem 0x0000000000100000-0x00000000cff6ffff] [ 0.021859] node 0: [mem 0x0000000100000000-0x000000022fffffff] [ 0.021866] Zeroed struct page in unavailable ranges: 244 pages [ 0.021867] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff] [ 0.021868] On node 0 totalpages: 2096908 [ 0.021870] DMA zone: 64 pages used for memmap [ 0.021870] DMA zone: 21 pages reserved [ 0.021871] DMA zone: 3996 pages, LIFO batch:0 [ 0.021931] DMA32 zone: 13246 pages used for memmap [ 0.021931] DMA32 zone: 847728 pages, LIFO batch:63 [ 0.040660] Normal zone: 19456 pages used for memmap [ 0.040661] Normal zone: 1245184 pages, LIFO batch:63 [ 0.068055] ACPI: PM-Timer IO Port: 0x808 [ 0.068058] ACPI: Local APIC address 0xfee00000 [ 0.068078] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.068081] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.068084] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.068085] ACPI: IRQ0 used by override. [ 0.068086] ACPI: IRQ9 used by override. [ 0.068088] Using ACPI (MADT) for SMP configuration information [ 0.068089] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.068097] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.068112] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.068113] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.068114] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.068115] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.068115] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.068116] PM: Registered nosave memory: [mem 0xcff70000-0xcff7dfff] [ 0.068117] PM: Registered nosave memory: [mem 0xcff7e000-0xcffcffff] [ 0.068118] PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff] [ 0.068118] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff] [ 0.068119] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.068119] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff] [ 0.068120] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.068122] [mem 0xd0000000-0xfedfffff] available for PCI devices [ 0.068124] Booting paravirtualized kernel on bare hardware [ 0.068127] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.068133] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.068768] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.068773] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.068774] pcpu-alloc: [0] 0 1 2 3 [ 0.068806] Built 1 zonelists, mobility grouping on. Total pages: 2064121 [ 0.068806] Policy zone: Normal [ 0.068808] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-21-generic root=UUID=bf90cda0-1b42-4783-bef3-1f9c18237e9d ro quiet splash vt.handoff=7 [ 0.070776] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.071746] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.071808] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.087476] Calgary: detecting Calgary via BIOS EBDA area [ 0.087477] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.145562] Memory: 8061304K/8387632K available (14339K kernel code, 2397K rwdata, 4944K rodata, 2712K init, 4992K bss, 326328K reserved, 0K cma-reserved) [ 0.145572] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.145742] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.145762] Kernel/User page tables isolation: enabled [ 0.145785] ftrace: allocating 44444 entries in 174 pages [ 0.163797] rcu: Hierarchical RCU implementation. [ 0.163799] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.163799] Tasks RCU enabled. [ 0.163800] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.163801] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.166926] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.167152] vt handoff: transparent VT on vt#7 [ 0.167160] Console: colour dummy device 80x25 [ 0.167164] printk: console [tty0] enabled [ 0.167183] ACPI: Core revision 20190816 [ 0.167265] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.167276] APIC: Switch to symmetric I/O mode setup [ 0.167625] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.187276] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3d0b16f01, max_idle_ns: 440795339342 ns [ 0.187281] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.33 BogoMIPS (lpj=11998668) [ 0.187283] pid_max: default: 32768 minimum: 301 [ 0.187315] LSM: Security Framework initializing [ 0.187326] Yama: becoming mindful. [ 0.187362] AppArmor: AppArmor initialized [ 0.187422] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.187451] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.187466] *** VALIDATE tmpfs *** [ 0.187628] *** VALIDATE proc *** [ 0.187688] *** VALIDATE cgroup1 *** [ 0.187690] *** VALIDATE cgroup2 *** [ 0.187739] mce: CPU0: Thermal monitoring enabled (TM2) [ 0.187742] process: using mwait in idle threads [ 0.187745] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.187745] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.187748] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.187749] Spectre V2 : Mitigation: Full generic retpoline [ 0.187750] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.187751] Speculative Store Bypass: Vulnerable [ 0.187753] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.187885] Freeing SMP alternatives memory: 40K [ 0.280536] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.280663] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.280668] ... version: 2 [ 0.280669] ... bit width: 40 [ 0.280670] ... generic registers: 2 [ 0.280670] ... value mask: 000000ffffffffff [ 0.280671] ... max period: 000000007fffffff [ 0.280672] ... fixed-purpose events: 3 [ 0.280672] ... event mask: 0000000700000003 [ 0.280712] rcu: Hierarchical SRCU implementation. [ 0.281624] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.281696] smp: Bringing up secondary CPUs ... [ 0.281835] x86: Booting SMP configuration: [ 0.281836] .... node #0, CPUs: #1 [ 0.287348] smp: Brought up 1 node, 2 CPUs [ 0.287348] smpboot: Max logical packages: 2 [ 0.287348] smpboot: Total of 2 processors activated (11998.66 BogoMIPS) [ 0.291689] devtmpfs: initialized [ 0.291689] x86/mm: Memory block size: 128MB [ 0.291689] PM: Registering ACPI NVS region [mem 0xcff7e000-0xcffcffff] (335872 bytes) [ 0.291689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291689] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.291689] pinctrl core: initialized pinctrl subsystem [ 0.291689] PM: RTC time: 18:07:40, date: 2020-04-07 [ 0.291689] NET: Registered protocol family 16 [ 0.291689] audit: initializing netlink subsys (disabled) [ 0.291689] audit: type=2000 audit(1586282860.124:1): state=initialized audit_enabled=0 res=1 [ 0.291689] EISA bus registered [ 0.291689] cpuidle: using governor ladder [ 0.291689] cpuidle: using governor menu [ 0.291689] ACPI: bus type PCI registered [ 0.291689] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.291689] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.291689] PCI: not using MMCONFIG [ 0.291689] PCI: Using configuration type 1 for base access [ 0.295840] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.295840] ACPI: Added _OSI(Module Device) [ 0.295840] ACPI: Added _OSI(Processor Device) [ 0.295840] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.295840] ACPI: Added _OSI(Processor Aggregator Device) [ 0.295840] ACPI: Added _OSI(Linux-Dell-Video) [ 0.295840] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.295840] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.305016] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.308933] ACPI: Dynamic OEM Table Load: [ 0.308938] ACPI: SSDT 0xFFFF8DD8A6BED400 000277 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.309532] ACPI: Dynamic OEM Table Load: [ 0.309536] ACPI: SSDT 0xFFFF8DD8A6B19000 0004B2 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.310354] ACPI: Dynamic OEM Table Load: [ 0.310358] ACPI: SSDT 0xFFFF8DD8A626DC00 000277 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 0.310879] ACPI: Dynamic OEM Table Load: [ 0.310883] ACPI: SSDT 0xFFFF8DD8A6BAC540 000085 (v01 PmRef P002Cst 00003000 INTL 20060113) [ 0.311621] ACPI: Interpreter enabled [ 0.311642] ACPI: (supports S0 S1 S3 S4 S5) [ 0.311643] ACPI: Using IOAPIC for interrupt routing [ 0.311677] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.313015] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.313031] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.313237] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.323034] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.323041] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.323045] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.323353] PCI host bridge to bus 0000:00 [ 0.323355] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.323357] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.323358] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.323359] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.323361] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window] [ 0.323362] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.323372] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000 [ 0.323392] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.323394] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 0.323482] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400 [ 0.323520] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.323642] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.323679] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f] [ 0.323805] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.323842] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f] [ 0.323970] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.324007] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f] [ 0.324137] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.324156] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff] [ 0.324227] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.324332] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.324349] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit] [ 0.324410] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.324505] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.324575] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.324688] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 0.324758] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.324865] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 0.324935] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.325044] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.325081] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f] [ 0.325209] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.325246] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f] [ 0.325372] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.325409] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f] [ 0.325540] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.325558] pci 0000:00:1d.7: reg 0x10: [mem 0xf9fff800-0xf9fffbff] [ 0.325629] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.325730] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.325880] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.325953] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.325956] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.325959] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.325962] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) [ 0.326079] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f [ 0.326092] pci 0000:00:1f.2: reg 0x10: [io 0x9000-0x9007] [ 0.326098] pci 0000:00:1f.2: reg 0x14: [io 0x8c00-0x8c03] [ 0.326104] pci 0000:00:1f.2: reg 0x18: [io 0x8880-0x8887] [ 0.326110] pci 0000:00:1f.2: reg 0x1c: [io 0x8800-0x8803] [ 0.326116] pci 0000:00:1f.2: reg 0x20: [io 0x8480-0x848f] [ 0.326122] pci 0000:00:1f.2: reg 0x24: [io 0x8400-0x840f] [ 0.326242] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.326257] pci 0000:00:1f.3: reg 0x10: [mem 0xf9fff400-0xf9fff4ff 64bit] [ 0.326274] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.326367] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185 [ 0.326380] pci 0000:00:1f.5: reg 0x10: [io 0xa000-0xa007] [ 0.326386] pci 0000:00:1f.5: reg 0x14: [io 0x9c00-0x9c03] [ 0.326392] pci 0000:00:1f.5: reg 0x18: [io 0x9880-0x9887] [ 0.326398] pci 0000:00:1f.5: reg 0x1c: [io 0x9800-0x9803] [ 0.326404] pci 0000:00:1f.5: reg 0x20: [io 0x9480-0x948f] [ 0.326410] pci 0000:00:1f.5: reg 0x24: [io 0x9400-0x940f] [ 0.326561] pci 0000:01:00.0: [10de:0614] type 00 class 0x030000 [ 0.326575] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.326583] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.326591] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.326597] pci 0000:01:00.0: reg 0x24: [io 0xbc00-0xbc7f] [ 0.326603] pci 0000:01:00.0: reg 0x30: [mem 0xfe8e0000-0xfe8fffff pref] [ 0.326608] pci 0000:01:00.0: enabling Extended Tags [ 0.326697] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.326699] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.326701] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff] [ 0.326703] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.326741] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.326748] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.326794] pci 0000:03:00.0: [11ab:6121] type 00 class 0x01018f [ 0.326817] pci 0000:03:00.0: reg 0x10: [io 0xdc00-0xdc07] [ 0.326827] pci 0000:03:00.0: reg 0x14: [io 0xd880-0xd883] [ 0.326836] pci 0000:03:00.0: reg 0x18: [io 0xd800-0xd807] [ 0.326846] pci 0000:03:00.0: reg 0x1c: [io 0xd480-0xd483] [ 0.326856] pci 0000:03:00.0: reg 0x20: [io 0xd400-0xd40f] [ 0.326866] pci 0000:03:00.0: reg 0x24: [mem 0xfeaffc00-0xfeafffff] [ 0.326931] pci 0000:03:00.0: supports D1 [ 0.326932] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.326997] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.327005] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.327007] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.327010] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.327062] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000 [ 0.327091] pci 0000:02:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit] [ 0.327102] pci 0000:02:00.0: reg 0x18: [io 0xcc00-0xcc7f] [ 0.327200] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.327267] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.327275] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.327280] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.327283] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.327300] pci_bus 0000:05: extended config space not accessible [ 0.327323] pci 0000:05:00.0: [1244:0e00] type 00 class 0x028000 [ 0.327337] pci 0000:05:00.0: reg 0x10: [mem 0xfebffc00-0xfebffc1f] [ 0.327345] pci 0000:05:00.0: reg 0x14: [io 0xec00-0xec1f] [ 0.327405] pci 0000:05:00.0: supports D2 [ 0.327407] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.327460] pci 0000:05:01.0: [9004:8178] type 00 class 0x010000 [ 0.327474] pci 0000:05:01.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.327482] pci 0000:05:01.0: reg 0x14: [mem 0xfebfe000-0xfebfefff] [ 0.327516] pci 0000:05:01.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.327581] pci 0000:05:03.0: [11c1:5811] type 00 class 0x0c0010 [ 0.327595] pci 0000:05:03.0: reg 0x10: [mem 0xfebfd000-0xfebfdfff] [ 0.327659] pci 0000:05:03.0: supports D1 D2 [ 0.327661] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot [ 0.327726] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.327728] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.327731] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.327735] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.327737] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.327738] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.327739] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.327741] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode) [ 0.328570] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.328650] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.328730] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.328810] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.328889] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.328969] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.329048] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.329128] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.329255] iommu: Default domain type: Translated [ 0.329255] SCSI subsystem initialized [ 0.329255] libata version 3.00 loaded. [ 0.329255] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.329255] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.329255] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.329255] vgaarb: loaded [ 0.329255] ACPI: bus type USB registered [ 0.329255] usbcore: registered new interface driver usbfs [ 0.329255] usbcore: registered new interface driver hub [ 0.329255] usbcore: registered new device driver usb [ 0.329255] pps_core: LinuxPPS API ver. 1 registered [ 0.329255] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.329255] PTP clock support registered [ 0.329255] EDAC MC: Ver: 3.0.0 [ 0.329255] PCI: Using ACPI for IRQ routing [ 0.334679] PCI: pci_cache_line_size set to 64 bytes [ 0.334729] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.334730] e820: reserve RAM buffer [mem 0xcff70000-0xcfffffff] [ 0.334846] NetLabel: Initializing [ 0.334847] NetLabel: domain hash size = 128 [ 0.334847] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.334864] NetLabel: unlabeled traffic allowed by default [ 0.335734] hpet: 4 channels of 0 reserved for per-cpu timers [ 0.335737] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.335739] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.337764] clocksource: Switched to clocksource tsc-early [ 0.351271] *** VALIDATE bpf *** [ 0.351387] VFS: Disk quotas dquot_6.6.0 [ 0.351407] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.351439] *** VALIDATE ramfs *** [ 0.351442] *** VALIDATE hugetlbfs *** [ 0.351552] AppArmor: AppArmor Filesystem Enabled [ 0.351589] pnp: PnP ACPI init [ 0.351707] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.351713] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.351797] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.352158] pnp 00:02: [dma 2] [ 0.352200] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.352323] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.352328] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.352530] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.352532] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.352533] system 00:04: [io 0x0500-0x057f] could not be reserved [ 0.352535] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.352537] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.352538] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.352540] system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.352544] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.352690] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved [ 0.352695] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.352977] pnp 00:06: [dma 0 disabled] [ 0.353037] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.353153] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.353154] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.353159] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.353214] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.353332] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.353337] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.353561] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.353563] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.353564] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.353566] system 00:0a: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.353570] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.353748] pnp: PnP ACPI: found 11 devices [ 0.355405] thermal_sys: Registered thermal governor 'fair_share' [ 0.355406] thermal_sys: Registered thermal governor 'bang_bang' [ 0.355407] thermal_sys: Registered thermal governor 'step_wise' [ 0.355408] thermal_sys: Registered thermal governor 'user_space' [ 0.355409] thermal_sys: Registered thermal governor 'power_allocator' [ 0.359906] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.359950] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.359953] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 add_align 100000 [ 0.359955] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.359957] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.359967] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff] [ 0.359971] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.359974] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.359976] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.359979] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.359981] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.359984] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff] [ 0.359986] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.359989] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.359991] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.359994] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff] [ 0.359997] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.360001] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.360003] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.360006] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] [ 0.360009] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.360013] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.360015] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.360018] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.360021] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.360025] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.360027] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.360031] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.360037] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.360038] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.360039] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.360040] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.360042] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff window] [ 0.360043] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.360044] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff] [ 0.360045] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.360047] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.360048] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff] [ 0.360049] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.360050] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.360052] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.360053] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.360054] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.360055] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.360056] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.360058] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.360059] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.360060] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.360061] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.360063] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.360064] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.360065] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff window] [ 0.360153] NET: Registered protocol family 2 [ 0.360384] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.360520] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.360833] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.360950] TCP: Hash tables configured (established 65536 bind 65536) [ 0.361035] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.361081] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.361137] NET: Registered protocol family 1 [ 0.361145] NET: Registered protocol family 44 [ 0.362293] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.362306] PCI: CLS 32 bytes, default 64 [ 0.362358] Trying to unpack rootfs image as initramfs... [ 0.730063] Freeing initrd memory: 83036K [ 0.730126] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.730129] software IO TLB: mapped [mem 0xcbf70000-0xcff70000] (64MB) [ 0.730298] check: Scanning for low memory corruption every 60 seconds [ 0.730754] Initialise system trusted keyrings [ 0.730766] Key type blacklist registered [ 0.730836] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.732557] zbud: loaded [ 0.732993] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.733187] fuse: init (API version 7.31) [ 0.733209] *** VALIDATE fuse *** [ 0.733210] *** VALIDATE fuse *** [ 0.733323] Platform Keyring initialized [ 0.738542] Key type asymmetric registered [ 0.738543] Asymmetric key parser 'x509' registered [ 0.738553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.738604] io scheduler mq-deadline registered [ 0.738958] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.739369] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.739425] vesafb: mode is 800x600x32, linelength=3200, pages=0 [ 0.739426] vesafb: scrolling: redraw [ 0.739427] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.739439] vesafb: framebuffer at 0xfb000000, mapped to 0x(____ptrval____), using 1920k, total 1920k [ 0.739487] fbcon: Deferring console take-over [ 0.739488] fb0: VESA VGA frame buffer device [ 0.739501] intel_idle: does not run on family 6 model 23 [ 0.739602] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.739627] ACPI: Power Button [PWRB] [ 0.739664] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.739699] ACPI: Power Button [PWRF] [ 0.739822] Monitor-Mwait will be used to enter C-1 state [ 0.739826] Monitor-Mwait will be used to enter C-2 state [ 0.739829] Monitor-Mwait will be used to enter C-3 state [ 0.739831] tsc: Marking TSC unstable due to TSC halts in idle [ 0.739890] clocksource: Switched to clocksource hpet [ 0.740283] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.760688] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.762777] Linux agpgart interface v0.103 [ 0.765071] loop: module loaded [ 0.765234] ata_piix 0000:00:1f.2: version 2.13 [ 0.765343] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.766734] scsi host0: ata_piix [ 0.766875] scsi host1: ata_piix [ 0.766920] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19 [ 0.766923] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19 [ 0.767007] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.768016] scsi host2: ata_piix [ 0.768118] scsi host3: ata_piix [ 0.768157] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19 [ 0.768159] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19 [ 0.768278] libphy: Fixed MDIO Bus: probed [ 0.768278] tun: Universal TUN/TAP device driver, 1.6 [ 0.768316] PPP generic driver version 2.4.2 [ 0.768383] VFIO - User Level meta-driver version: 0.3 [ 0.768439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.768442] ehci-pci: EHCI PCI platform driver [ 0.768548] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.768553] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.768563] ehci-pci 0000:00:1a.7: debug port 1 [ 0.772486] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 0.772495] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 0.787317] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.787379] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.787382] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.787384] usb usb1: Product: EHCI Host Controller [ 0.787386] usb usb1: Manufacturer: Linux 5.4.0-21-generic ehci_hcd [ 0.787388] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.787505] hub 1-0:1.0: USB hub found [ 0.787511] hub 1-0:1.0: 6 ports detected [ 0.787763] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.787767] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.787776] ehci-pci 0000:00:1d.7: debug port 1 [ 0.791683] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.791693] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 0.811373] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.811424] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.811427] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.811428] usb usb2: Product: EHCI Host Controller [ 0.811430] usb usb2: Manufacturer: Linux 5.4.0-21-generic ehci_hcd [ 0.811432] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.811542] hub 2-0:1.0: USB hub found [ 0.811548] hub 2-0:1.0: 6 ports detected [ 0.811712] ehci-platform: EHCI generic platform driver [ 0.811721] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.811723] ohci-pci: OHCI PCI platform driver [ 0.811735] ohci-platform: OHCI generic platform driver [ 0.811740] uhci_hcd: USB Universal Host Controller Interface driver [ 0.811823] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.811827] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.811832] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.811853] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 [ 0.811895] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.811897] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.811898] usb usb3: Product: UHCI Host Controller [ 0.811899] usb usb3: Manufacturer: Linux 5.4.0-21-generic uhci_hcd [ 0.811900] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.812003] hub 3-0:1.0: USB hub found [ 0.812009] hub 3-0:1.0: 2 ports detected [ 0.812185] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.812189] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.812194] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.812216] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 [ 0.812257] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.812258] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.812259] usb usb4: Product: UHCI Host Controller [ 0.812261] usb usb4: Manufacturer: Linux 5.4.0-21-generic uhci_hcd [ 0.812262] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.812357] hub 4-0:1.0: USB hub found [ 0.812363] hub 4-0:1.0: 2 ports detected [ 0.812529] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.812533] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.812538] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.812553] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00 [ 0.812601] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.812602] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.812603] usb usb5: Product: UHCI Host Controller [ 0.812605] usb usb5: Manufacturer: Linux 5.4.0-21-generic uhci_hcd [ 0.812606] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.812705] hub 5-0:1.0: USB hub found [ 0.812711] hub 5-0:1.0: 2 ports detected [ 0.812878] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.812883] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.812887] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.812904] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 [ 0.812944] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.812946] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.812947] usb usb6: Product: UHCI Host Controller [ 0.812948] usb usb6: Manufacturer: Linux 5.4.0-21-generic uhci_hcd [ 0.812950] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.813050] hub 6-0:1.0: USB hub found [ 0.813056] hub 6-0:1.0: 2 ports detected [ 0.813224] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.813229] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.813242] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.813257] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 [ 0.813297] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.813299] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.813300] usb usb7: Product: UHCI Host Controller [ 0.813302] usb usb7: Manufacturer: Linux 5.4.0-21-generic uhci_hcd [ 0.813303] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.813397] hub 7-0:1.0: USB hub found [ 0.813403] hub 7-0:1.0: 2 ports detected [ 0.813567] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.813572] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.813577] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.813592] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 [ 0.813635] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.813636] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.813638] usb usb8: Product: UHCI Host Controller [ 0.813639] usb usb8: Manufacturer: Linux 5.4.0-21-generic uhci_hcd [ 0.813640] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.813729] hub 8-0:1.0: USB hub found [ 0.813735] hub 8-0:1.0: 2 ports detected [ 0.813903] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.813904] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.814395] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.814500] mousedev: PS/2 mouse device common for all mice [ 0.814641] rtc_cmos 00:01: RTC can wake from S4 [ 0.814801] rtc_cmos 00:01: registered as rtc0 [ 0.814817] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.814824] i2c /dev entries driver [ 0.814865] device-mapper: uevent: version 1.0.3 [ 0.814925] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 0.814945] platform eisa.0: Probing EISA bus 0 [ 0.814947] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.814948] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.814950] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.814951] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.814952] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.814953] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.814954] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.814956] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.814957] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.814958] platform eisa.0: EISA: Detected 0 cards [ 0.814961] intel_pstate: CPU model not supported [ 0.814983] ledtrig-cpu: registered to indicate activity on CPUs [ 0.815048] drop_monitor: Initializing network drop monitor service [ 0.815241] NET: Registered protocol family 10 [ 0.824403] Segment Routing with IPv6 [ 0.824425] NET: Registered protocol family 17 [ 0.824466] Key type dns_resolver registered [ 0.824631] RAS: Correctable Errors collector initialized. [ 0.824664] microcode: sig=0x10676, pf=0x1, revision=0x60f [ 0.824706] microcode: Microcode Update Driver: v2.2. [ 0.824712] IPI shorthand broadcast: enabled [ 0.824777] registered taskstats version 1 [ 0.824790] Loading compiled-in X.509 certificates [ 0.827110] Loaded X.509 cert 'Build time autogenerated kernel key: fb48f4e7babb5816ebe6a7e3475f7bfd9691a0f2' [ 0.827144] zswap: loaded using pool lzo/zbud [ 0.827216] Key type ._fscrypt registered [ 0.827217] Key type .fscrypt registered [ 0.835511] Key type big_key registered [ 0.836640] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.839657] Key type encrypted registered [ 0.839660] AppArmor: AppArmor sha1 policy hashing enabled [ 0.839666] ima: No TPM chip found, activating TPM-bypass! [ 0.839670] ima: Allocated hash algorithm: sha1 [ 0.839678] ima: No architecture policies found [ 0.839686] evm: Initialising EVM extended attributes: [ 0.839687] evm: security.selinux [ 0.839688] evm: security.SMACK64 [ 0.839688] evm: security.SMACK64EXEC [ 0.839689] evm: security.SMACK64TRANSMUTE [ 0.839689] evm: security.SMACK64MMAP [ 0.839690] evm: security.apparmor [ 0.839690] evm: security.ima [ 0.839691] evm: security.capability [ 0.839692] evm: HMAC attrs: 0x1 [ 0.840083] PM: Magic number: 0:487:139 [ 0.840151] acpi device:10: hash matches [ 0.840210] rtc_cmos 00:01: setting system clock to 2020-04-07T18:07:40 UTC (1586282860) [ 0.840731] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 1.092805] ata4: SATA link down (SStatus 0 SControl 300) [ 1.103372] ata3: SATA link down (SStatus 0 SControl 300) [ 1.343367] random: fast init done [ 1.371346] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 1.563360] usb 6-1: config 1 interface 0 altsetting 1 endpoint 0x85 has invalid wMaxPacketSize 0 [ 1.563362] usb 6-1: config 1 interface 0 altsetting 1 endpoint 0x6 has invalid wMaxPacketSize 0 [ 1.563370] usb 6-1: config 1 interface 0 altsetting 2 endpoint 0x83 has invalid wMaxPacketSize 0 [ 1.563372] usb 6-1: config 1 interface 0 altsetting 2 endpoint 0x4 has invalid wMaxPacketSize 0 [ 1.579395] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.579406] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.583409] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.583420] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.591389] usb 6-1: New USB device found, idVendor=0681, idProduct=0002, bcdDevice= 1.00 [ 1.591391] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.591393] usb 6-1: Product: Gigaset 4175 isdn [ 1.591395] usb 6-1: Manufacturer: Siemens AG [ 1.591396] usb 6-1: SerialNumber: 005D730B60 [ 1.601909] ata1.00: ATA-9: M4-CT128M4SSD2, 0009, max UDMA/100 [ 1.601911] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.602076] ata1.01: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133 [ 1.602078] ata1.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.604575] ata1.00: configured for UDMA/100 [ 1.607416] ata2.00: ATAPI: HL-DT-ST DVDRAM GH20LS15, JL00, max UDMA/100 [ 1.607585] ata2.01: ATA-8: WDC WD6400AAKS-22A7B0, 01.03B01, max UDMA/133 [ 1.607587] ata2.01: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.623930] ata1.01: configured for UDMA/133 [ 1.624089] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0009 PQ: 0 ANSI: 5 [ 1.624276] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.624339] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.624365] sd 0:0:0:0: [sda] Write Protect is off [ 1.624367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.624407] scsi 0:0:1:0: Direct-Access ATA WDC WD15EARS-00Z 0A80 PQ: 0 ANSI: 5 [ 1.624440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.624611] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.624662] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.624684] sd 0:0:1:0: [sdb] Write Protect is off [ 1.624685] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.624722] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.631410] ata2.00: configured for UDMA/100 [ 1.636113] ata2.01: configured for UDMA/133 [ 1.646748] sda: sda1 sda2 sda3 [ 1.659155] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.672669] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 1.673246] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.753361] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20LS15 JL00 PQ: 0 ANSI: 5 [ 1.918854] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.918856] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.919084] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.919150] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.931431] scsi 1:0:1:0: Direct-Access ATA WDC WD6400AAKS-2 3B01 PQ: 0 ANSI: 5 [ 1.931585] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 1.931652] sd 1:0:1:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 1.931673] sd 1:0:1:0: [sdc] Write Protect is off [ 1.931674] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.931705] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.040508] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 2.041413] sd 1:0:1:0: [sdc] Attached SCSI disk [ 2.042915] Freeing unused decrypted memory: 2040K [ 2.043672] Freeing unused kernel image memory: 2712K [ 2.055320] Write protecting the kernel read-only data: 22528k [ 2.056136] Freeing unused kernel image memory: 2008K [ 2.056575] Freeing unused kernel image memory: 1200K [ 2.068953] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.068969] x86/mm: Checking user space page tables [ 2.080973] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.080976] Run /init as init process [ 2.093807] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.094608] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.094618] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.189904] Floppy drive(s): fd0 is 1.44M [ 2.211148] FDC 0 is a post-1991 82077 [ 2.242311] ahci 0000:03:00.0: version 3.0 [ 2.245914] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20190816/utaddress-204) [ 2.245920] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.245922] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20190816/utaddress-204) [ 2.245925] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.245926] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20190816/utaddress-204) [ 2.245929] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.245930] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.250922] scsi host4: pata_marvell [ 2.251033] scsi host5: pata_marvell [ 2.251080] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16 [ 2.251081] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16 [ 2.271823] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20190816/utaddress-204) [ 2.271829] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.305634] ATL1E 0000:02:00.0 enp2s0: renamed from eth0 [ 2.317465] checking generic (fb000000 1e0000) vs hw (d0000000 10000000) [ 2.317466] checking generic (fb000000 1e0000) vs hw (fa000000 2000000) [ 2.317467] fb0: switching to nouveaufb from VESA VGA [ 2.317586] nouveau 0000:01:00.0: NVIDIA G92 (092a00a2) [ 2.343634] firewire_ohci 0000:05:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 2.425195] nouveau 0000:01:00.0: bios: version 62.92.23.00.00 [ 2.425253] usb 6-2: new low-speed USB device number 3 using uhci_hcd [ 2.445952] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4120B, A100, max UDMA/33 [ 2.446062] nouveau 0000:01:00.0: fb: 512 MiB GDDR3 [ 2.474116] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4120B A100 PQ: 0 ANSI: 5 [ 2.523364] [TTM] Zone kernel: Available graphics memory: 4076170 KiB [ 2.523366] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 2.523366] [TTM] Initializing pool allocator [ 2.523372] [TTM] Initializing DMA pool allocator [ 2.523392] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB [ 2.523393] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.523397] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 2.523398] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.523400] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028 [ 2.523402] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030 [ 2.523403] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028 [ 2.523405] nouveau 0000:01:00.0: DRM: DCB outp 03: 02011312 00020030 [ 2.523406] nouveau 0000:01:00.0: DRM: DCB outp 04: 010223f1 00c0c080 [ 2.523408] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 2.523409] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002130 [ 2.523410] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000210 [ 2.523411] nouveau 0000:01:00.0: DRM: DCB conn 03: 00000211 [ 2.523412] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000213 [ 2.526194] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies [ 2.526649] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19 [ 2.526650] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing [ 2.526656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.526657] [drm] Driver supports precise vblank timestamp query. [ 2.531233] sr 4:0:0:0: [sr1] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.587495] sr 4:0:0:0: Attached scsi CD-ROM sr1 [ 2.587631] sr 4:0:0:0: Attached scsi generic sg4 type 5 [ 2.592333] nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x70000, bo (____ptrval____) [ 2.593423] fbcon: nouveaudrmfb (fb0) is primary device [ 2.593424] fbcon: Deferring console take-over [ 2.593426] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device [ 2.623377] usb 6-2: New USB device found, idVendor=046d, idProduct=c024, bcdDevice=98.02 [ 2.623379] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.623381] usb 6-2: Product: USB-PS/2 Optical Mouse [ 2.623382] usb 6-2: Manufacturer: B16_b_02 [ 2.631302] hidraw: raw HID events driver (C) Jiri Kosina [ 2.646568] usbcore: registered new interface driver usbhid [ 2.646569] usbhid: USB HID core driver [ 2.649237] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C024.0001/input/input3 [ 2.649739] hid-generic 0003:046D:C024.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 2.651530] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 2.839315] usb 2-4: new high-speed USB device number 4 using ehci-pci [ 2.875746] usb 2-4: New USB device found, idVendor=04cc, idProduct=1521, bcdDevice= 2.00 [ 2.875748] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.876013] hub 2-4:1.0: USB hub found [ 2.876113] hub 2-4:1.0: 7 ports detected [ 2.951408] firewire_core 0000:05:03.0: created device fw0: GUID 001e8c000157b245, S400 [ 3.167309] usb 2-4.4: new full-speed USB device number 5 using ehci-pci [ 3.276243] usb 2-4.4: device descriptor read/all, error -32 [ 3.363298] usb 2-4.4: new full-speed USB device number 6 using ehci-pci [ 3.472749] usb 2-4.4: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice= 1.34 [ 3.472752] usb 2-4.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.689037] random: crng init done [ 3.689039] random: 7 urandom warning(s) missed due to ratelimiting [ 7.303311] scsi host6: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs [ 11.527295] raid6: sse2x4 gen() 8931 MB/s [ 11.575290] raid6: sse2x4 xor() 6777 MB/s [ 11.623289] raid6: sse2x2 gen() 6742 MB/s [ 11.671284] raid6: sse2x2 xor() 6132 MB/s [ 11.719295] raid6: sse2x1 gen() 4799 MB/s [ 11.767284] raid6: sse2x1 xor() 5005 MB/s [ 11.767285] raid6: using algorithm sse2x4 gen() 8931 MB/s [ 11.767286] raid6: .... xor() 6777 MB/s, rmw enabled [ 11.767286] raid6: using ssse3x2 recovery algorithm [ 11.770570] xor: measuring software checksum speed [ 11.807284] prefetch64-sse: 16599.000 MB/sec [ 11.847284] generic_sse: 14071.000 MB/sec [ 11.847285] xor: using function: prefetch64-sse (16599.000 MB/sec) [ 11.868440] Btrfs loaded, crc32c=crc32c-generic [ 26.491769] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 26.491774] floppy: error 10 while reading block 0 [ 28.149657] BTRFS: device label home devid 1 transid 240 /dev/mapper/grp--1-h--new [ 28.382750] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 29.583681] systemd[1]: Inserted module 'autofs4' [ 29.679665] systemd[1]: systemd 245.2-1ubuntu2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 29.699401] systemd[1]: Detected architecture x86-64. [ 29.726142] systemd[1]: Set hostname to . [ 31.339909] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 31.497572] systemd[1]: Created slice system-modprobe.slice. [ 31.497886] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 31.498127] systemd[1]: Created slice User and Session Slice. [ 31.498203] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 31.498421] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 31.498610] systemd[1]: Reached target User and Group Name Lookups. [ 31.498641] systemd[1]: Reached target Slices. [ 31.498745] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 31.498856] systemd[1]: Listening on LVM2 poll daemon socket. [ 31.502983] systemd[1]: Listening on RPCbind Server Activation Socket. [ 31.503141] systemd[1]: Listening on Syslog Socket. [ 31.503270] systemd[1]: Listening on fsck to fsckd communication Socket. [ 31.503359] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 31.503595] systemd[1]: Listening on Journal Audit Socket. [ 31.503717] systemd[1]: Listening on Journal Socket (/dev/log). [ 31.503870] systemd[1]: Listening on Journal Socket. [ 31.504008] systemd[1]: Listening on udev Control Socket. [ 31.504101] systemd[1]: Listening on udev Kernel Socket. [ 31.505102] systemd[1]: Mounting Huge Pages File System... [ 31.506244] systemd[1]: Mounting POSIX Message Queue File System... [ 31.507399] systemd[1]: Mounting RPC Pipe File System... [ 31.508548] systemd[1]: Mounting Kernel Debug File System... [ 31.509726] systemd[1]: Mounting Kernel Trace File System... [ 31.511626] systemd[1]: Starting Journal Service... [ 31.512798] systemd[1]: Starting Availability of block devices... [ 31.514487] systemd[1]: Starting Set the console keyboard layout... [ 31.515749] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 31.516760] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 31.516814] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 31.559246] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 31.559320] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 31.593336] systemd[1]: Starting Load Kernel Modules... [ 31.594359] systemd[1]: Starting Remount Root and Kernel File Systems... [ 31.595418] systemd[1]: Starting udev Coldplug all Devices... [ 31.596724] systemd[1]: Starting Uncomplicated firewall... [ 31.599887] systemd[1]: Mounted Huge Pages File System. [ 31.600108] systemd[1]: Mounted POSIX Message Queue File System. [ 31.600291] systemd[1]: Mounted Kernel Debug File System. [ 31.600465] systemd[1]: Mounted Kernel Trace File System. [ 31.601077] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 31.625304] systemd[1]: Finished Availability of block devices. [ 31.761307] RPC: Registered named UNIX socket transport module. [ 31.761308] RPC: Registered udp transport module. [ 31.761309] RPC: Registered tcp transport module. [ 31.761310] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 31.763227] systemd[1]: Mounted RPC Pipe File System. [ 31.801163] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro [ 31.803760] systemd[1]: Finished Remount Root and Kernel File Systems. [ 31.900377] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 31.901530] systemd[1]: Starting Load/Save Random Seed... [ 31.902551] systemd[1]: Starting Create System Users... [ 31.905104] systemd[1]: Finished Set the console keyboard layout. [ 31.906173] systemd[1]: Finished Uncomplicated firewall. [ 32.001366] systemd[1]: Finished udev Coldplug all Devices. [ 32.253451] systemd[1]: Started Journal Service. [ 32.310944] systemd-journald[399]: Received client request to flush runtime journal. [ 32.335538] lp: driver loaded but no devices found [ 32.387117] ppdev: user-space parallel port driver [ 34.476368] Modular ISDN core version 1.1.29 [ 34.476425] NET: Registered protocol family 34 [ 34.572896] mISDNipac module version 2.0 [ 34.629997] AVM Fritz PCI driver Rev. 2.3 [ 34.630112] mISDN: found adapter Fritz!Card PCI v2 at 0000:05:00.0 [ 34.630118] AVM.1: AVM Fritz!CARD PCIv2 config irq:16 base:0xEC00 [ 34.660270] AVM 1 cards installed DEBUG [ 35.150119] Bluetooth: Core ver 2.22 [ 35.150141] NET: Registered protocol family 31 [ 35.150142] Bluetooth: HCI device and connection manager initialized [ 35.150146] Bluetooth: HCI socket layer initialized [ 35.150148] Bluetooth: L2CAP socket layer initialized [ 35.150152] Bluetooth: SCO socket layer initialized [ 35.788672] intel_powerclamp: No package C-state available [ 35.819532] intel_powerclamp: No package C-state available [ 36.557346] gigaset: module is from the staging directory, the quality is unknown, you have been warned. [ 36.557396] gigaset: module verification failed: signature and/or required key missing - tainting kernel [ 36.557850] gigaset: Driver for Gigaset 307x [ 36.557851] gigaset: no ISDN subsystem interface [ 36.748677] bas_gigaset: module is from the staging directory, the quality is unknown, you have been warned. [ 36.753478] usb 6-1: gigaset_probe: Device matched (Vendor: 0x681, Product: 0x2) [ 36.753596] usbcore: registered new interface driver bas_gigaset [ 36.753597] bas_gigaset: USB Driver for Gigaset 307x [ 36.852274] usbcore: registered new interface driver btusb [ 38.296706] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1200: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 38.296709] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 38.296711] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 38.296712] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 38.296713] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 38.296714] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 38.296760] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 38.296762] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 38.296763] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 38.312268] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 38.312331] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 38.312387] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 38.312442] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 38.312499] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 38.312556] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 38.312614] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 38.312677] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 44.106849] BTRFS info (device dm-9): disk space caching is enabled [ 44.106852] BTRFS info (device dm-9): has skinny extents [ 46.015144] REISERFS (device sdc8): found reiserfs format "3.6" with standard journal [ 46.015153] REISERFS (device sdc8): using ordered data mode [ 46.015154] reiserfs: using flush barriers [ 46.015302] REISERFS (device sdc9): found reiserfs format "3.6" with standard journal [ 46.015375] REISERFS (device sdc9): using ordered data mode [ 46.015375] reiserfs: using flush barriers [ 46.064317] REISERFS (device sdc8): journal params: device sdc8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 46.064662] REISERFS (device sdc8): checking transaction log (sdc8) [ 46.076823] REISERFS (device sdc9): journal params: device sdc9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 46.077177] REISERFS (device sdc9): checking transaction log (sdc9) [ 46.093102] REISERFS (device sdc7): found reiserfs format "3.6" with standard journal [ 46.093111] REISERFS (device sdc7): using ordered data mode [ 46.093111] reiserfs: using flush barriers [ 46.108702] REISERFS (device sdc7): journal params: device sdc7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 46.109039] REISERFS (device sdc7): checking transaction log (sdc7) [ 46.316109] REISERFS (device sdc9): Using r5 hash to sort names [ 46.331309] Adding 8008364k swap on /dev/sdc5. Priority:-2 extents:1 across:8008364k FS [ 46.377935] REISERFS (device sdc8): Using r5 hash to sort names [ 46.427936] REISERFS (device sdc7): Using r5 hash to sort names [ 46.689059] EXT4-fs (sdc2): mounting ext3 file system using the ext4 subsystem [ 47.025400] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 47.109822] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem [ 47.167518] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) [ 47.220004] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 47.367117] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 47.367126] ext3 filesystem being mounted at /phys/wd6400aaks/1 supports timestamps until 2038 (0x7fffffff) [ 47.586030] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 47.881203] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 48.015365] Adding 9765884k swap on /dev/sda2. Priority:-3 extents:1 across:9765884k SSFS [ 48.142032] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 48.505749] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 48.683685] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 50.890839] audit: type=1400 audit(1586282910.544:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1047 comm="apparmor_parser" [ 50.954862] audit: type=1400 audit(1586282910.608:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1049 comm="apparmor_parser" [ 50.955680] audit: type=1400 audit(1586282910.612:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1048 comm="apparmor_parser" [ 51.027761] audit: type=1400 audit(1586282910.684:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1052 comm="apparmor_parser" [ 51.114600] audit: type=1400 audit(1586282910.768:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1057 comm="apparmor_parser" [ 51.114605] audit: type=1400 audit(1586282910.768:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1057 comm="apparmor_parser" [ 51.114607] audit: type=1400 audit(1586282910.768:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1057 comm="apparmor_parser" [ 51.114610] audit: type=1400 audit(1586282910.768:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=1057 comm="apparmor_parser" [ 51.174810] audit: type=1400 audit(1586282910.828:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1059 comm="apparmor_parser" [ 51.174814] audit: type=1400 audit(1586282910.828:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1059 comm="apparmor_parser" [ 57.586416] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 57.586418] Bluetooth: BNEP filters: protocol multicast [ 57.586422] Bluetooth: BNEP socket layer initialized [ 59.396699] kauditd_printk_skb: 14 callbacks suppressed [ 59.396701] audit: type=1400 audit(1586282919.052:26): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1158 comm="cups-browsed" capability=23 capname="sys_nice" [ 60.476796] ATL1E 0000:02:00.0 enp2s0: NIC Link is Up <1000 Mbps Full Duplex> [ 60.476806] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 73.455309] Bluetooth: RFCOMM TTY layer initialized [ 73.455316] Bluetooth: RFCOMM socket layer initialized [ 73.455321] Bluetooth: RFCOMM ver 1.11 [ 2617.004943] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 2656.999383] perf: interrupt took too long (3134 > 3128), lowering kernel.perf_event_max_sample_rate to 63750 [ 3053.128147] perf: interrupt took too long (3937 > 3917), lowering kernel.perf_event_max_sample_rate to 50750 [ 8958.426472] audit: type=1400 audit(1586291818.082:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=45929 comm="apparmor_parser" [ 8958.426966] audit: type=1400 audit(1586291818.082:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=45929 comm="apparmor_parser" [ 8958.427505] audit: type=1400 audit(1586291818.086:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=45929 comm="apparmor_parser" [ 8958.428124] audit: type=1400 audit(1586291818.086:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=45929 comm="apparmor_parser" [ 8997.911750] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 8997.973806] JFS: nTxBlock = 8192, nTxLock = 65536 [ 8998.017217] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 8998.044714] QNX4 filesystem 0.2.3 registered. [10316.087575] nouveau 0000:01:00.0: fb: trapped read at 0100ad6000 on channel -1 [1fea0000 unknown] engine 06 [BAR] client 08 [PFIFO_READ] subclient 01 [IN] reason 00000002 [PAGE_NOT_PRESENT]