[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-22-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #63-Ubuntu SMP Wed Aug 18 22:54:26 UTC 2010 (Ubuntu 2.6.31-22.63-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 base 0D8000000 mask FFC000000 write-combining [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] modified: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 7000-c000 [ 0.000000] RAMDISK: 1f895000 - 1ffdf280 [ 0.000000] ACPI: RSDP 000f7730 00014 (v00 VIA694) [ 0.000000] ACPI: RSDT 1fff3000 00028 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 1fff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 1fff30c0 02451 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 1fff0000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] node 0 low ram: 00000000 - 1fff0000 [ 0.000000] node 0 bootmap 00008000 - 0000c000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0160] TEXT DATA BSS ==> [0000100000 - 00008b0160] [ 0.000000] #4 [001f895000 - 001ffdf280] RAMDISK ==> [001f895000 - 001ffdf280] [ 0.000000] #5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #6 [00008b1000 - 00008b40be] BRK ==> [00008b1000 - 00008b40be] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130956 [ 0.000000] free_area_init_node: node 0, pgdat c078ad40, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3964 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1402000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129932 [ 0.000000] Kernel command line: root=UUID=d90a9557-79f9-47c3-9824-97a2f3e95938 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2621120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 501104k/524224k available (4583k kernel code, 22516k reserved, 2150k data, 544k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.000000] .init : 0xc0794000 - 0xc081c000 ( 544 kB) [ 0.000000] .data : 0xc0579f08 - 0xc0793848 (2150 kB) [ 0.000000] .text : 0xc0100000 - 0xc0579f08 (4583 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 799.935 MHz processor. [ 0.001311] Console: colour VGA+ 80x25 [ 0.001322] console [tty0] enabled [ 0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 1599.87 BogoMIPS (lpj=3199740) [ 0.004091] Security Framework initialized [ 0.004184] AppArmor: AppArmor initialized [ 0.004207] Mount-cache hash table entries: 512 [ 0.004615] Initializing cgroup subsys ns [ 0.004631] Initializing cgroup subsys cpuacct [ 0.004644] Initializing cgroup subsys memory [ 0.004669] Initializing cgroup subsys devices [ 0.004678] Initializing cgroup subsys freezer [ 0.004685] Initializing cgroup subsys net_cls [ 0.004724] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004733] CPU: L2 Cache: 64K (64 bytes/line) [ 0.004746] mce: CPU supports 4 MCE banks [ 0.004806] Performance Counters: AMD PMU driver. [ 0.004820] ------------[ cut here ]------------ [ 0.004859] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40() [ 0.004868] Hardware name: VT8363 [ 0.004873] Modules linked in: [ 0.004886] Pid: 0, comm: swapper Not tainted 2.6.31-22-generic #63-Ubuntu [ 0.004894] Call Trace: [ 0.004927] [] warn_slowpath_common+0x6d/0xa0 [ 0.004939] [] ? native_apic_write_dummy+0x33/0x40 [ 0.004951] [] ? native_apic_write_dummy+0x33/0x40 [ 0.004964] [] warn_slowpath_null+0x15/0x20 [ 0.004975] [] native_apic_write_dummy+0x33/0x40 [ 0.004992] [] perf_counters_lapic_init+0x2c/0x30 [ 0.005017] [] init_hw_perf_counters+0x159/0x21c [ 0.005029] [] identify_boot_cpu+0x21/0x23 [ 0.005040] [] check_bugs+0xb/0xe9 [ 0.005050] [] start_kernel+0x2dc/0x2ec [ 0.005059] [] ? unknown_bootoption+0x0/0x19e [ 0.005070] [] i386_start_kernel+0x7c/0x83 [ 0.005096] ---[ end trace a7919e7f17c0a725 ]--- [ 0.005124] ... version: 0 [ 0.005130] ... bit width: 48 [ 0.005135] ... generic counters: 4 [ 0.005141] ... value mask: 0000ffffffffffff [ 0.005147] ... max period: 00007fffffffffff [ 0.005153] ... fixed-purpose counters: 0 [ 0.005159] ... counter mask: 000000000000000f [ 0.005174] Checking 'hlt' instruction... OK. [ 0.020199] SMP alternatives: switching to UP code [ 0.032066] Freeing SMP alternatives: 20k freed [ 0.032187] ACPI: Core revision 20090521 [ 0.043744] ACPI: setting ELCR to 0008 (from 5c08) [ 0.045626] weird, boot CPU (#0) not listed by the BIOS. [ 0.045634] SMP motherboard not detected. [ 0.045642] Local APIC not detected. Using dummy APIC emulation. [ 0.045649] SMP disabled [ 0.046343] Brought up 1 CPUs [ 0.046360] Total of 1 processors activated (1599.87 BogoMIPS). [ 0.046418] CPU0 attaching NULL sched-domain. [ 0.047296] Booting paravirtualized kernel on bare hardware [ 0.048102] regulator: core version 0.5 [ 0.048163] Time: 1:51:38 Date: 10/19/10 [ 0.048356] NET: Registered protocol family 16 [ 0.048775] EISA bus registered [ 0.048831] ACPI: bus type pci registered [ 0.082381] PCI: PCI BIOS revision 2.10 entry at 0xfb220, last bus=1 [ 0.082388] PCI: Using configuration type 1 for base access [ 0.085363] bio: create slab at 0 [ 0.086553] ACPI: EC: Look up EC in DSDT [ 0.093221] ACPI: Interpreter enabled [ 0.093250] ACPI: (supports S0 S1 S4 S5) [ 0.093315] ACPI: Using PIC for interrupt routing [ 0.101154] ACPI: No dock devices found. [ 0.101437] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.101580] pci 0000:00:00.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff] [ 0.101704] pci 0000:00:01.0: supports D1 [ 0.101841] pci 0000:00:07.1: reg 20 io port: [0xc000-0xc00f] [ 0.101932] pci 0000:00:07.2: reg 20 io port: [0xc400-0xc41f] [ 0.102018] pci 0000:00:07.3: reg 20 io port: [0xc800-0xc81f] [ 0.102141] pci 0000:00:07.4: quirk: region 4000-40ff claimed by vt82c586 ACPI [ 0.102152] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon [ 0.102162] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB [ 0.102224] pci 0000:00:0e.0: reg 10 io port: [0xcc00-0xcc1f] [ 0.102287] pci 0000:00:0f.0: reg 10 io port: [0xd000-0xd007] [ 0.102299] pci 0000:00:0f.0: reg 14 io port: [0xd400-0xd403] [ 0.102311] pci 0000:00:0f.0: reg 18 io port: [0xd800-0xd807] [ 0.102323] pci 0000:00:0f.0: reg 1c io port: [0xdc00-0xdc03] [ 0.102335] pci 0000:00:0f.0: reg 20 io port: [0xe000-0xe03f] [ 0.102348] pci 0000:00:0f.0: reg 24 32bit mmio: [0xdf000000-0xdf01ffff] [ 0.102360] pci 0000:00:0f.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.102426] pci 0000:00:10.0: reg 20 io port: [0xe400-0xe41f] [ 0.102458] pci 0000:00:10.0: supports D1 D2 [ 0.102466] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102476] pci 0000:00:10.0: PME# disabled [ 0.102537] pci 0000:00:10.1: reg 20 io port: [0xe800-0xe81f] [ 0.102569] pci 0000:00:10.1: supports D1 D2 [ 0.102576] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102585] pci 0000:00:10.1: PME# disabled [ 0.102629] pci 0000:00:10.2: reg 10 32bit mmio: [0xdf020000-0xdf0200ff] [ 0.102679] pci 0000:00:10.2: supports D1 D2 [ 0.102685] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102695] pci 0000:00:10.2: PME# disabled [ 0.102745] pci 0000:00:11.0: reg 10 io port: [0xec00-0xecff] [ 0.102799] pci 0000:00:11.0: supports D1 D2 [ 0.102877] pci 0000:01:00.0: reg 10 32bit mmio: [0xdc000000-0xdcffffff] [ 0.102890] pci 0000:01:00.0: reg 14 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.102918] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.102990] pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xddffffff] [ 0.103002] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.103017] pci_bus 0000:00: on NUMA node 0 [ 0.103035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.143652] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) [ 0.144089] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.144494] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.144893] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 *14 15) [ 0.145514] SCSI subsystem initialized [ 0.145814] libata version 3.00 loaded. [ 0.146133] usbcore: registered new interface driver usbfs [ 0.146183] usbcore: registered new interface driver hub [ 0.146276] usbcore: registered new device driver usb [ 0.146766] ACPI: WMI: Mapper loaded [ 0.146775] PCI: Using ACPI for IRQ routing [ 0.147199] Bluetooth: Core ver 2.15 [ 0.147386] NET: Registered protocol family 31 [ 0.147393] Bluetooth: HCI device and connection manager initialized [ 0.147403] Bluetooth: HCI socket layer initialized [ 0.147410] NetLabel: Initializing [ 0.147415] NetLabel: domain hash size = 128 [ 0.147420] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.147468] NetLabel: unlabeled traffic allowed by default [ 0.154327] pnp: PnP ACPI init [ 0.154402] ACPI: bus type pnp registered [ 0.161149] pnp: PnP ACPI: found 11 devices [ 0.161161] ACPI: ACPI bus type pnp unregistered [ 0.161173] PnPBIOS: Disabled by ACPI PNP [ 0.161212] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.161223] system 00:00: iomem range 0xd1800-0xd3fff has been reserved [ 0.161233] system 00:00: iomem range 0xf0000-0xfbfff could not be reserved [ 0.161243] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.161253] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved [ 0.161263] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.161273] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.161282] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.161292] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.161302] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.161324] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.196344] AppArmor: AppArmor Filesystem Enabled [ 0.196432] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.196440] pci 0000:00:01.0: IO window: disabled [ 0.196452] pci 0000:00:01.0: MEM window: 0xdc000000-0xddffffff [ 0.196463] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xd7ffffff [ 0.196490] pci 0000:00:01.0: setting latency timer to 64 [ 0.196506] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.196515] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.196524] pci_bus 0000:01: resource 1 mem: [0xdc000000-0xddffffff] [ 0.196533] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff] [ 0.196652] NET: Registered protocol family 2 [ 0.196935] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.197793] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.198498] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.199269] TCP: Hash tables configured (established 16384 bind 16384) [ 0.199280] TCP reno registered [ 0.199632] NET: Registered protocol family 1 [ 0.199869] Trying to unpack rootfs image as initramfs... [ 0.700168] Switched to high resolution mode on CPU 0 [ 0.864490] Freeing initrd memory: 7464k freed [ 0.896773] cpufreq-nforce2: No nForce2 chipset. [ 0.896844] Scanning for low memory corruption every 60 seconds [ 0.897201] audit: initializing netlink socket (disabled) [ 0.897254] type=2000 audit(1287453098.896:1): initialized [ 0.921962] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.926888] VFS: Disk quotas dquot_6.5.2 [ 0.927107] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.929022] fuse init (API version 7.12) [ 0.929303] msgmni has been set to 993 [ 0.930182] alg: No test for stdrng (krng) [ 0.930239] io scheduler noop registered [ 0.930247] io scheduler anticipatory registered [ 0.930254] io scheduler deadline registered [ 0.930481] io scheduler cfq registered (default) [ 0.930524] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.930536] pci 0000:00:07.0: Disabling VIA external APIC routing [ 0.930683] pci 0000:01:00.0: Boot video device [ 0.930949] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.931026] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.931408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.931421] ACPI: Power Button [PWRF] [ 0.931567] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.931577] ACPI: Power Button [PWRB] [ 0.931713] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.931727] ACPI: Sleep Button [SLPB] [ 0.932382] Marking TSC unstable due to TSC halts in idle [ 0.932438] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.932524] processor LNXCPU:00: registered as cooling_device0 [ 0.932536] ACPI: Processor [CPU0] (supports 2 throttling states) [ 0.936682] isapnp: Scanning for PnP cards... [ 1.291837] isapnp: No Plug & Play device found [ 1.295394] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.295699] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.296525] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.299824] brd: module loaded [ 1.301511] loop: module loaded [ 1.301870] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.304838] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 1.304851] PCI: setting IRQ 11 as level-triggered [ 1.304866] pata_pdc202xx_old 0000:00:0f.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.305307] scsi0 : pata_pdc202xx_old [ 1.305760] scsi1 : pata_pdc202xx_old [ 1.305876] ata1: PATA max UDMA/66 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 11 [ 1.305887] ata2: PATA max UDMA/66 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 11 [ 1.306170] pata_via 0000:00:07.1: version 0.3.4 [ 1.306854] scsi2 : pata_via [ 1.307200] scsi3 : pata_via [ 1.307313] ata3: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14 [ 1.307324] ata4: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15 [ 1.308612] Fixed MDIO Bus: probed [ 1.308739] PPP generic driver version 2.4.2 [ 1.309126] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.310386] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 1.310397] PCI: setting IRQ 10 as level-triggered [ 1.310412] ehci_hcd 0000:00:10.2: PCI INT C -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 1.310481] ehci_hcd 0000:00:10.2: EHCI Host Controller [ 1.310653] ehci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 1 [ 1.310773] ehci_hcd 0000:00:10.2: irq 10, io mem 0xdf020000 [ 1.311102] ata3: port disabled. ignoring. [ 1.320061] ehci_hcd 0000:00:10.2: USB 2.0 started, EHCI 1.00 [ 1.320410] usb usb1: configuration #1 chosen from 1 choice [ 1.320509] hub 1-0:1.0: USB hub found [ 1.320550] hub 1-0:1.0: 4 ports detected [ 1.320751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.320839] uhci_hcd: USB Universal Host Controller Interface driver [ 1.322277] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 14 [ 1.322288] PCI: setting IRQ 14 as level-triggered [ 1.322302] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 14 (level, low) -> IRQ 14 [ 1.322327] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 1.322544] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2 [ 1.322598] uhci_hcd 0000:00:07.2: irq 14, io base 0x0000c400 [ 1.322934] usb usb2: configuration #1 chosen from 1 choice [ 1.323046] hub 2-0:1.0: USB hub found [ 1.323083] hub 2-0:1.0: 2 ports detected [ 1.323238] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 14 (level, low) -> IRQ 14 [ 1.323262] uhci_hcd 0000:00:07.3: UHCI Host Controller [ 1.323385] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3 [ 1.323430] uhci_hcd 0000:00:07.3: irq 14, io base 0x0000c800 [ 1.323734] usb usb3: configuration #1 chosen from 1 choice [ 1.323832] hub 3-0:1.0: USB hub found [ 1.323867] hub 3-0:1.0: 2 ports detected [ 1.324101] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKD] -> GSI 14 (level, low) -> IRQ 14 [ 1.324133] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 1.324281] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4 [ 1.324329] uhci_hcd 0000:00:10.0: irq 14, io base 0x0000e400 [ 1.324685] usb usb4: configuration #1 chosen from 1 choice [ 1.324777] hub 4-0:1.0: USB hub found [ 1.324812] hub 4-0:1.0: 2 ports detected [ 1.326244] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12 [ 1.326255] PCI: setting IRQ 12 as level-triggered [ 1.326269] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKA] -> GSI 12 (level, low) -> IRQ 12 [ 1.326293] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 1.326504] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5 [ 1.326562] uhci_hcd 0000:00:10.1: irq 12, io base 0x0000e800 [ 1.326889] usb usb5: configuration #1 chosen from 1 choice [ 1.326983] hub 5-0:1.0: USB hub found [ 1.327017] hub 5-0:1.0: 2 ports detected [ 1.327304] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.327312] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.327521] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.327781] mice: PS/2 mouse device common for all mice [ 1.328461] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.328517] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 1.328811] device-mapper: uevent: version 1.0.3 [ 1.329282] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.329571] device-mapper: multipath: version 1.1.0 loaded [ 1.329582] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.330088] EISA: Probing bus 0 at eisa.0 [ 1.330125] Cannot allocate resource for EISA slot 4 [ 1.330132] Cannot allocate resource for EISA slot 5 [ 1.330138] Cannot allocate resource for EISA slot 6 [ 1.330156] EISA: Detected 0 cards. [ 1.330510] cpuidle: using governor ladder [ 1.330653] cpuidle: using governor menu [ 1.332443] TCP cubic registered [ 1.332978] NET: Registered protocol family 10 [ 1.334323] lo: Disabled Privacy Extensions [ 1.335262] NET: Registered protocol family 17 [ 1.335358] Bluetooth: L2CAP ver 2.13 [ 1.335364] Bluetooth: L2CAP socket layer initialized [ 1.335374] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.335379] Bluetooth: SCO socket layer initialized [ 1.335620] Bluetooth: RFCOMM TTY layer initialized [ 1.335632] Bluetooth: RFCOMM socket layer initialized [ 1.335638] Bluetooth: RFCOMM ver 1.11 [ 1.335691] powernow-k8: Processor cpuid 631 not supported [ 1.335763] Using IPI No-Shortcut mode [ 1.336138] PM: Resume from disk failed. [ 1.336184] registered taskstats version 1 [ 1.336537] Magic number: 14:892:862 [ 1.336787] rtc_cmos 00:04: setting system clock to 2010-10-19 01:51:39 UTC (1287453099) [ 1.336798] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.336804] EDD information not available. [ 1.349443] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.468682] ata1.00: ATA-5: Maxtor 92049U6, RA530JN0, max UDMA/66 [ 1.468694] ata1.00: 39882528 sectors, multi 16: LBA [ 1.484540] ata1.00: configured for UDMA/66 [ 1.484972] scsi 0:0:0:0: Direct-Access ATA Maxtor 92049U6 RA53 PQ: 0 ANSI: 5 [ 1.485502] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.485730] sd 0:0:0:0: [sda] 39882528 512-byte logical blocks: (20.4 GB/19.0 GiB) [ 1.485893] sd 0:0:0:0: [sda] Write Protect is off [ 1.485904] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.485986] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.486462] sda: sda1 sda2 < sda5 > [ 1.523752] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.804377] ata4.00: ATAPI: ATAPI DVD-ROM 16X Maximum, , max UDMA/66 [ 1.804462] ata4.01: ATAPI: ASUS CD-S520/A, 2.0K, max UDMA/33 [ 1.820322] ata4.00: configured for UDMA/66 [ 1.820864] ata4.01: configured for UDMA/33 [ 1.822883] scsi 3:0:0:0: CD-ROM DVD-ROM 1.00 PQ: 0 ANSI: 5 [ 1.825726] sr0: scsi3-mmc drive: 294x/48x cd/rw xa/form2 cdda tray [ 1.825742] Uniform CD-ROM driver Revision: 3.20 [ 1.826133] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.826332] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.826885] scsi 3:0:1:0: CD-ROM ASUS CD-S520/A 2.0K PQ: 0 ANSI: 5 [ 1.829397] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 1.829737] sr 3:0:1:0: Attached scsi CD-ROM sr1 [ 1.829943] sr 3:0:1:0: Attached scsi generic sg2 type 5 [ 1.830065] Freeing unused kernel memory: 544k freed [ 1.832562] Write protecting the kernel text: 4584k [ 1.832654] Write protecting the kernel read-only data: 1844k [ 1.932130] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 2.115877] usb 4-1: configuration #1 chosen from 1 choice [ 2.120267] hub 4-1:1.0: USB hub found [ 2.126721] hub 4-1:1.0: 4 ports detected [ 2.429858] usb 4-2: new low speed USB device using uhci_hcd and address 3 [ 2.515685] Linux agpgart interface v0.103 [ 2.596404] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset [ 2.610961] usb 4-2: configuration #1 chosen from 1 choice [ 2.671531] Floppy drive(s): fd0 is 1.44M [ 2.689235] FDC 0 is a post-1991 82077 [ 2.693737] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xd8000000 [ 2.915791] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 2.915917] ne2k-pci 0000:00:0e.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 2.917885] eth0: RealTek RTL-8029 found at 0xcc00, IRQ 10, 00:00:c5:3c:c0:1b. [ 3.087418] usbcore: registered new interface driver hiddev [ 3.101626] input: HID 062a:0000 as /devices/pci0000:00/0000:00:10.0/usb4/4-2/4-2:1.0/input/input5 [ 3.101904] generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:10.0-2/input0 [ 3.101969] usbcore: registered new interface driver usbhid [ 3.101979] usbhid: v2.6:USB HID core driver [ 4.218231] PM: Starting manual resume from disk [ 4.218253] PM: Resume from partition 8:5 [ 4.218259] PM: Checking hibernation image. [ 4.218881] PM: Resume from disk failed. [ 4.260119] kjournald starting. Commit interval 5 seconds [ 4.260182] EXT3-fs: mounted filesystem with ordered data mode. [ 5.554382] type=1505 audit(1287453103.715:2): operation="profile_load" pid=330 name=/usr/share/gdm/guest-session/Xsession [ 5.588361] type=1505 audit(1287453103.751:3): operation="profile_load" pid=331 name=/sbin/dhclient3 [ 5.589400] type=1505 audit(1287453103.751:4): operation="profile_load" pid=331 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.589894] type=1505 audit(1287453103.751:5): operation="profile_load" pid=331 name=/usr/lib/connman/scripts/dhclient-script [ 5.673056] type=1505 audit(1287453103.835:6): operation="profile_load" pid=332 name=/usr/bin/evince [ 5.691612] type=1505 audit(1287453103.851:7): operation="profile_load" pid=332 name=/usr/bin/evince-previewer [ 5.703749] type=1505 audit(1287453103.863:8): operation="profile_load" pid=332 name=/usr/bin/evince-thumbnailer [ 5.750452] type=1505 audit(1287453103.911:9): operation="profile_load" pid=334 name=/usr/lib/cups/backend/cups-pdf [ 5.751876] type=1505 audit(1287453103.911:10): operation="profile_load" pid=334 name=/usr/sbin/cupsd [ 23.927660] Adding 730916k swap on /dev/sda5. Priority:-1 extents:1 across:730916k [ 23.992686] udev: starting version 147 [ 24.204632] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.448707] parport_pc: VIA 686A/8231 detected [ 24.448718] parport_pc: probing current configuration [ 24.448744] parport_pc: Current parallel port base: 0x378 [ 24.448834] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 24.557086] parport_pc: VIA parallel port: io=0x378, irq=7 [ 24.651093] lp0: using parport0 (interrupt-driven). [ 26.113499] nvidia: module license 'NVIDIA' taints kernel. [ 26.113516] Disabling lock debugging due to kernel taint [ 26.154363] NVRM: The NVIDIA GeForce2 GTS/GeForce2 Pro GPU installed in this system is [ 26.154373] NVRM: supported through the NVIDIA 71.86.xx Legacy drivers. Please [ 26.154378] NVRM: visit http://www.nvidia.com/object/unix.html for more [ 26.154383] NVRM: information. The 185.18.36 NVIDIA driver will ignore [ 26.154387] NVRM: this GPU. Continuing probe... [ 26.154405] NVRM: No NVIDIA graphics adapter found! [ 26.201053] ppdev: user-space parallel port driver [ 26.284833] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.794314] C-Media PCI 0000:00:11.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 388.599594] EXT3 FS on sda1, internal journal [ 391.742072] __ratelimit: 6 callbacks suppressed [ 391.742086] type=1505 audit(1287453489.904:13): operation="profile_replace" pid=686 name=/usr/share/gdm/guest-session/Xsession [ 391.793694] type=1505 audit(1287453489.955:14): operation="profile_replace" pid=697 name=/sbin/dhclient3 [ 391.794824] type=1505 audit(1287453489.955:15): operation="profile_replace" pid=697 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 391.795336] type=1505 audit(1287453489.955:16): operation="profile_replace" pid=697 name=/usr/lib/connman/scripts/dhclient-script [ 391.928715] type=1505 audit(1287453490.091:17): operation="profile_replace" pid=699 name=/usr/bin/evince [ 391.954703] type=1505 audit(1287453490.115:18): operation="profile_replace" pid=699 name=/usr/bin/evince-previewer [ 391.969263] type=1505 audit(1287453490.131:19): operation="profile_replace" pid=699 name=/usr/bin/evince-thumbnailer [ 392.147649] type=1505 audit(1287453490.307:20): operation="profile_replace" pid=701 name=/usr/lib/cups/backend/cups-pdf [ 392.149224] type=1505 audit(1287453490.311:21): operation="profile_replace" pid=701 name=/usr/sbin/cupsd [ 392.212442] type=1505 audit(1287453490.375:22): operation="profile_replace" pid=704 name=/usr/sbin/mysqld-akonadi [ 404.088075] eth0: no IPv6 routers present [354347.519447] usb 4-1.2: new full speed USB device using uhci_hcd and address 4 [354347.637541] usb 4-1.2: not running at top speed; connect to a high speed hub [354347.670861] usb 4-1.2: configuration #1 chosen from 1 choice [354348.893713] Initializing USB Mass Storage driver... [354348.894786] scsi4 : SCSI emulation for USB Mass Storage devices [354348.895186] usbcore: registered new interface driver usb-storage [354348.895199] USB Mass Storage support registered. [354348.897743] usb-storage: device found at 4 [354348.897754] usb-storage: waiting for device to settle before scanning [354353.901853] usb-storage: device scan complete [354353.945809] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 150 PMAP PQ: 0 ANSI: 0 CCS [354353.947488] sd 4:0:0:0: Attached scsi generic sg3 type 0 [354355.934905] sd 4:0:0:0: [sdb] 63037440 512-byte logical blocks: (32.2 GB/30.0 GiB) [354355.966998] sd 4:0:0:0: [sdb] Write Protect is off [354355.967017] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [354355.967026] sd 4:0:0:0: [sdb] Assuming drive cache: write through [354356.033035] sd 4:0:0:0: [sdb] Assuming drive cache: write through [354356.033065] sdb: sdb1 [354356.135995] sd 4:0:0:0: [sdb] Assuming drive cache: write through [354356.136908] sd 4:0:0:0: [sdb] Attached SCSI removable disk [354688.881046] hrtimer: interrupt too slow, forcing clock min delta to 9134403 ns [354943.463346] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [354943.463367] ata1.00: BMDMA stat 0x4 [354943.463394] ata1.00: cmd ca/00:08:87:00:e5/00:00:00:00:00/e1 tag 0 dma 4096 out [354943.463400] res 51/84:08:87:00:e5/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [354943.463411] ata1.00: status: { DRDY ERR } [354943.463418] ata1.00: error: { ICRC ABRT } [354943.463456] ata1: soft resetting link [354943.647049] ata1.00: configured for UDMA/66 [354943.647102] ata1: EH complete [355581.055445] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [355581.055462] ata1.00: BMDMA stat 0x4 [355581.055488] ata1.00: cmd ca/00:20:c7:50:e7/00:00:00:00:00/e1 tag 0 dma 16384 out [355581.055493] res 51/84:20:c7:50:e7/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [355581.055504] ata1.00: status: { DRDY ERR } [355581.055512] ata1.00: error: { ICRC ABRT } [355581.055550] ata1: soft resetting link [355581.247371] ata1.00: configured for UDMA/66 [355581.247433] ata1: EH complete [355654.968227] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [355654.968246] ata1.00: BMDMA stat 0x4 [355654.968272] ata1.00: cmd ca/00:08:8f:01:e8/00:00:00:00:00/e1 tag 0 dma 4096 out [355654.968277] res 51/84:08:8f:01:e8/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [355654.968288] ata1.00: status: { DRDY ERR } [355654.968296] ata1.00: error: { ICRC ABRT } [355654.968330] ata1: soft resetting link [355655.160466] ata1.00: configured for UDMA/66 [355655.160521] ata1: EH complete [355730.201977] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [355730.201995] ata1.00: BMDMA stat 0x4 [355730.202021] ata1.00: cmd c8/00:38:9f:5a:39/00:00:00:00:00/e2 tag 0 dma 28672 in [355730.202026] res 51/84:00:9f:5a:39/00:00:00:00:00/e2 Emask 0x10 (ATA bus error) [355730.202037] ata1.00: status: { DRDY ERR } [355730.202045] ata1.00: error: { ICRC ABRT } [355730.202886] ata1: soft resetting link [355730.386547] ata1.00: configured for UDMA/66 [355730.386601] ata1: EH complete [356031.998988] ata1.00: limiting speed to UDMA/44:PIO4 [356031.999009] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [356031.999022] ata1.00: BMDMA stat 0x4 [356031.999048] ata1.00: cmd c8/00:80:77:c5:0e/00:00:00:00:00/e0 tag 0 dma 65536 in [356031.999053] res 51/84:00:77:c5:0e/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [356031.999064] ata1.00: status: { DRDY ERR } [356031.999071] ata1.00: error: { ICRC ABRT } [356031.999105] ata1: soft resetting link [356032.204302] ata1.00: configured for UDMA/44 [356032.204362] ata1: EH complete [356819.116275] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [356819.116293] ata1.00: BMDMA stat 0x4 [356819.116319] ata1.00: cmd c8/00:20:f7:62:21/00:00:00:00:00/e0 tag 0 dma 16384 in [356819.116324] res 51/84:00:f7:62:21/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [356819.116335] ata1.00: status: { DRDY ERR } [356819.116343] ata1.00: error: { ICRC ABRT } [356819.116376] ata1: soft resetting link [356819.281742] ata1.00: configured for UDMA/44 [356819.281792] ata1: EH complete [356933.910221] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [356933.910239] ata1.00: BMDMA stat 0x4 [356933.910265] ata1.00: cmd ca/00:08:df:14:e8/00:00:00:00:00/e1 tag 0 dma 4096 out [356933.910271] res 51/84:08:df:14:e8/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [356933.910281] ata1.00: status: { DRDY ERR } [356933.910289] ata1.00: error: { ICRC ABRT } [356933.910328] ata1: soft resetting link [356934.133980] ata1.00: configured for UDMA/44 [356934.134029] ata1: EH complete [357258.976759] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [357258.976778] ata1.00: BMDMA stat 0x4 [357258.976807] ata1.00: cmd c8/00:20:bf:7c:00/00:00:00:00:00/e0 tag 0 dma 16384 in [357258.976812] res 51/84:00:bf:7c:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [357258.976823] ata1.00: status: { DRDY ERR } [357258.976831] ata1.00: error: { ICRC ABRT } [357258.976867] ata1: soft resetting link [357259.269237] ata1.00: configured for UDMA/44 [357259.269304] ata1: EH complete [361316.435196] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [361316.435196] ata1.00: BMDMA stat 0x4 [361316.435196] ata1.00: cmd c8/00:00:0f:6a:dd/00:00:00:00:00/e0 tag 0 dma 131072 in [361316.435196] res 51/84:00:0f:6a:dd/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [361316.435196] ata1.00: status: { DRDY ERR } [361316.435196] ata1.00: error: { ICRC ABRT } [361316.435196] ata1: soft resetting link [361316.622478] ata1.00: configured for UDMA/44 [361316.622531] ata1: EH complete [361759.089699] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [361759.089717] ata1.00: BMDMA stat 0x4 [361759.089744] ata1.00: cmd c8/00:08:e7:eb:86/00:00:00:00:00/e0 tag 0 dma 4096 in [361759.089749] res 51/84:00:e7:eb:86/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [361759.089760] ata1.00: status: { DRDY ERR } [361759.089767] ata1.00: error: { ICRC ABRT } [361759.089802] ata1: soft resetting link [361759.277000] ata1.00: configured for UDMA/44 [361759.277053] ata1: EH complete [374013.016881] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [374013.016881] ata1.00: BMDMA stat 0x4 [374013.016881] ata1.00: cmd ca/00:08:8f:12:e9/00:00:00:00:00/e1 tag 0 dma 4096 out [374013.016881] res 51/84:08:8f:12:e9/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [374013.016881] ata1.00: status: { DRDY ERR } [374013.016881] ata1.00: error: { ICRC ABRT } [374013.016881] ata1: soft resetting link [374013.273098] ata1.00: configured for UDMA/44 [374013.273146] ata1: EH complete [378356.317637] usb 4-1.2: USB disconnect, address 4