[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-19-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #56-Ubuntu SMP Thu Jan 28 02:39:34 UTC 2010 (Ubuntu 2.6.31-19.56-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 100000000 mask FC0000000 write-back [ 0.000000] 1 base 130000000 mask FF0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0CFF00000 mask FFFF00000 write-through [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] modified: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] modified: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfee0000 page 4k [ 0.000000] kernel direct mapping tables up to cfee0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000 [ 0.000000] RAMDISK: 3782c000 - 37fef8d1 [ 0.000000] ACPI: RSDP 00000000000f6f40 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfee3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee3180 054DD (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfee0000 00040 [ 0.000000] ACPI: HPET 00000000cfee87c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfee8840 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfee86c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000011fff] [ 0.000000] bootmap [0000000000012000 - 0000000000037fff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e4ccc] TEXT DATA BSS ==> [0001000000 - 00019e4ccc] [ 0.000000] #3 [003782c000 - 0037fef8d1] RAMDISK ==> [003782c000 - 0037fef8d1] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00019e5000 - 00019e50ee] BRK ==> [00019e5000 - 00019e50ee] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f55a0] f55a0 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfee0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048186 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000 [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031058 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4048580k/4980736k available (5315k kernel code, 787992k absent, 144164k reserved, 3017k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3007.164 MHz processor. [ 0.000814] Console: colour VGA+ 80x25 [ 0.000818] console [tty0] enabled [ 0.010000] allocated 41943040 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6014.32 BogoMIPS (lpj=30071640) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.010000] CPU: L2 cache: 2048K [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 4 MCE banks [ 0.010000] CPU0: Thermal monitoring enabled (TM1) [ 0.010000] using mwait in idle threads. [ 0.010000] Performance Counters: no PMU driver, software counters only. [ 0.010000] ACPI: Core revision 20090521 [ 0.018504] Setting APIC routing to flat [ 0.018826] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.118854] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 [ 0.120000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 6014.27 BogoMIPS (lpj=30071376) [ 0.010000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.010000] CPU: L2 cache: 2048K [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 4 MCE banks [ 0.010000] CPU1: Thermal monitoring enabled (TM1) [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.271071] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 [ 0.271082] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.280017] Brought up 2 CPUs [ 0.280021] Total of 2 processors activated (12028.60 BogoMIPS). [ 0.280073] CPU0 attaching sched-domain: [ 0.280077] domain 0: span 0-1 level CPU [ 0.280080] groups: 0 1 [ 0.280087] CPU1 attaching sched-domain: [ 0.280090] domain 0: span 0-1 level CPU [ 0.280092] groups: 1 0 [ 0.280168] Booting paravirtualized kernel on bare hardware [ 0.280204] regulator: core version 0.5 [ 0.280204] Time: 22:00:16 Date: 02/10/10 [ 0.280204] NET: Registered protocol family 16 [ 0.280281] ACPI: bus type pci registered [ 0.280369] PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255 [ 0.280373] PCI: MCFG area at d0000000 reserved in E820 [ 0.291125] PCI: Using MMCONFIG at d0000000 - dfffffff [ 0.291128] PCI: Using configuration type 1 for base access [ 0.291165] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.291168] mtrr: probably your BIOS does not setup all CPUs. [ 0.291170] mtrr: corrected configuration. [ 0.292292] bio: create slab at 0 [ 0.292292] ACPI: EC: Look up EC in DSDT [ 0.301397] ACPI: Interpreter enabled [ 0.301406] ACPI: (supports S0 S3 S4 S5) [ 0.301436] ACPI: Using IOAPIC for interrupt routing [ 0.308857] ACPI: No dock devices found. [ 0.309007] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.309146] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.309151] pci 0000:00:01.0: PME# disabled [ 0.309234] pci 0000:00:1a.0: reg 20 io port: [0xe100-0xe11f] [ 0.309314] pci 0000:00:1a.1: reg 20 io port: [0xe200-0xe21f] [ 0.309392] pci 0000:00:1a.2: reg 20 io port: [0xe000-0xe01f] [ 0.309459] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf5105000-0xf51053ff] [ 0.309552] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf5100000-0xf5103fff] [ 0.309599] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.309604] pci 0000:00:1b.0: PME# disabled [ 0.309671] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.309676] pci 0000:00:1c.0: PME# disabled [ 0.309746] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.309751] pci 0000:00:1c.4: PME# disabled [ 0.309821] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.309826] pci 0000:00:1c.5: PME# disabled [ 0.309887] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f] [ 0.309965] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f] [ 0.310078] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f] [ 0.310146] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf5104000-0xf51043ff] [ 0.310321] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.310326] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.310331] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.310335] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.310397] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.310405] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.310412] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.310418] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.310425] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] [ 0.310432] pci 0000:00:1f.2: reg 24 io port: [0xfc00-0xfc0f] [ 0.310485] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf5106000-0xf51060ff] [ 0.310501] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.310551] pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707] [ 0.310558] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803] [ 0.310565] pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907] [ 0.310572] pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03] [ 0.310578] pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f] [ 0.310585] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f] [ 0.310654] pci 0000:01:00.0: reg 10 64bit mmio: [0xe0000000-0xefffffff] [ 0.310666] pci 0000:01:00.0: reg 18 64bit mmio: [0xf1000000-0xf100ffff] [ 0.310672] pci 0000:01:00.0: reg 20 io port: [0xb000-0xb0ff] [ 0.310683] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.310706] pci 0000:01:00.0: supports D1 D2 [ 0.310745] pci 0000:01:00.1: reg 10 64bit mmio: [0xf1010000-0xf1013fff] [ 0.310787] pci 0000:01:00.1: supports D1 D2 [ 0.310843] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.310847] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf1ffffff] [ 0.310853] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.310902] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff] [ 0.310970] pci 0000:03:00.0: reg 10 io port: [0xc000-0xc007] [ 0.310980] pci 0000:03:00.0: reg 14 io port: [0xc100-0xc103] [ 0.310991] pci 0000:03:00.0: reg 18 io port: [0xc200-0xc207] [ 0.311001] pci 0000:03:00.0: reg 1c io port: [0xc300-0xc303] [ 0.311011] pci 0000:03:00.0: reg 20 io port: [0xc400-0xc40f] [ 0.311115] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.311120] pci 0000:00:1c.4: bridge 32bit mmio: [0xf2000000-0xf2ffffff] [ 0.311191] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff] [ 0.311215] pci 0000:04:00.0: reg 18 64bit mmio: [0xf4000000-0xf4000fff] [ 0.311239] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.311290] pci 0000:04:00.0: supports D1 D2 [ 0.311293] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.311299] pci 0000:04:00.0: PME# disabled [ 0.311360] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] [ 0.311365] pci 0000:00:1c.5: bridge 32bit mmio: [0xf3000000-0xf4ffffff] [ 0.311419] pci 0000:05:07.0: reg 10 32bit mmio: [0xf5004000-0xf50047ff] [ 0.311428] pci 0000:05:07.0: reg 14 32bit mmio: [0xf5000000-0xf5003fff] [ 0.311475] pci 0000:05:07.0: supports D1 D2 [ 0.311478] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot [ 0.311483] pci 0000:05:07.0: PME# disabled [ 0.311526] pci 0000:00:1e.0: transparent bridge [ 0.311533] pci 0000:00:1e.0: bridge 32bit mmio: [0xf5000000-0xf50fffff] [ 0.311564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.311794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.311881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.311970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.312043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.334810] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.334950] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.335090] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.335228] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.335367] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.335508] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.335646] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.335784] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.336029] SCSI subsystem initialized [ 0.336072] libata version 3.00 loaded. [ 0.336072] usbcore: registered new interface driver usbfs [ 0.336072] usbcore: registered new interface driver hub [ 0.336072] usbcore: registered new device driver usb [ 0.336072] ACPI: WMI: Mapper loaded [ 0.336072] PCI: Using ACPI for IRQ routing [ 0.360011] Bluetooth: Core ver 2.15 [ 0.360029] NET: Registered protocol family 31 [ 0.360029] Bluetooth: HCI device and connection manager initialized [ 0.360029] Bluetooth: HCI socket layer initialized [ 0.360029] NetLabel: Initializing [ 0.360029] NetLabel: domain hash size = 128 [ 0.360029] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.360044] NetLabel: unlabeled traffic allowed by default [ 0.360110] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.360117] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.400010] pnp: PnP ACPI init [ 0.400025] ACPI: bus type pnp registered [ 0.404216] pnp: PnP ACPI: found 15 devices [ 0.404220] ACPI: ACPI bus type pnp unregistered [ 0.404233] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.404237] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.404241] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.404244] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.404247] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.404257] system 00:0b: ioport range 0x400-0x4bf could not be reserved [ 0.404265] system 00:0c: iomem range 0xd0000000-0xdfffffff has been reserved [ 0.404273] system 00:0d: iomem range 0xcf000-0xcffff has been reserved [ 0.404276] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 0.404279] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 0.404283] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 0.404286] system 00:0d: iomem range 0xcfee0000-0xcfefffff could not be reserved [ 0.404290] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.404293] system 00:0d: iomem range 0x100000-0xcfedffff could not be reserved [ 0.404297] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.404300] system 00:0d: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.404304] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.404307] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.404310] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.404314] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved [ 0.404317] system 00:0d: iomem range 0xe0000-0xeffff has been reserved [ 0.409052] AppArmor: AppArmor Filesystem Enabled [ 0.409119] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.409123] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.409128] pci 0000:00:01.0: MEM window: 0xf0000000-0xf1ffffff [ 0.409133] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.409139] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.409143] pci 0000:00:1c.0: IO window: 0xa000-0xafff [ 0.409148] pci 0000:00:1c.0: MEM window: disabled [ 0.409152] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.409157] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.409161] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.409166] pci 0000:00:1c.4: MEM window: 0xf2000000-0xf2ffffff [ 0.409170] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.409176] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.409179] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 0.409185] pci 0000:00:1c.5: MEM window: 0xf3000000-0xf4ffffff [ 0.409190] pci 0000:00:1c.5: PREFETCH window: 0xf5200000-0xf52fffff [ 0.409195] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.409197] pci 0000:00:1e.0: IO window: disabled [ 0.409203] pci 0000:00:1e.0: MEM window: 0xf5000000-0xf50fffff [ 0.409207] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.409219] alloc irq_desc for 16 on node 0 [ 0.409222] alloc kstat_irqs on node 0 [ 0.409229] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.409234] pci 0000:00:01.0: setting latency timer to 64 [ 0.409243] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.409248] pci 0000:00:1c.0: setting latency timer to 64 [ 0.409256] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.409260] pci 0000:00:1c.4: setting latency timer to 64 [ 0.409268] alloc irq_desc for 17 on node 0 [ 0.409270] alloc kstat_irqs on node 0 [ 0.409275] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.409279] pci 0000:00:1c.5: setting latency timer to 64 [ 0.409287] pci 0000:00:1e.0: setting latency timer to 64 [ 0.409292] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.409295] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.409298] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.409301] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf1ffffff] [ 0.409304] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.409307] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.409310] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.409313] pci_bus 0000:03: resource 1 mem: [0xf2000000-0xf2ffffff] [ 0.409316] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.409319] pci_bus 0000:04: resource 1 mem: [0xf3000000-0xf4ffffff] [ 0.409322] pci_bus 0000:04: resource 2 pref mem [0xf5200000-0xf52fffff] [ 0.409325] pci_bus 0000:05: resource 1 mem: [0xf5000000-0xf50fffff] [ 0.409327] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.409330] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.409375] NET: Registered protocol family 2 [ 0.409625] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.411600] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.415888] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.416444] TCP: Hash tables configured (established 524288 bind 65536) [ 0.416447] TCP reno registered [ 0.416577] NET: Registered protocol family 1 [ 0.416658] Trying to unpack rootfs image as initramfs... [ 0.501114] Switched to high resolution mode on CPU 1 [ 0.510007] Switched to high resolution mode on CPU 0 [ 0.646292] Freeing initrd memory: 7950k freed [ 0.650886] Scanning for low memory corruption every 60 seconds [ 0.651042] audit: initializing netlink socket (disabled) [ 0.651058] type=2000 audit(1265839216.650:1): initialized [ 0.659617] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.661440] VFS: Disk quotas dquot_6.5.2 [ 0.661512] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.662377] fuse init (API version 7.12) [ 0.662489] msgmni has been set to 7922 [ 0.662762] alg: No test for stdrng (krng) [ 0.662790] io scheduler noop registered [ 0.662793] io scheduler anticipatory registered [ 0.662796] io scheduler deadline registered [ 0.662856] io scheduler cfq registered (default) [ 0.663017] pci 0000:01:00.0: Boot video device [ 0.663194] alloc irq_desc for 24 on node 0 [ 0.663197] alloc kstat_irqs on node 0 [ 0.663209] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.663217] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.663365] alloc irq_desc for 25 on node 0 [ 0.663368] alloc kstat_irqs on node 0 [ 0.663377] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.663386] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.663556] alloc irq_desc for 26 on node 0 [ 0.663559] alloc kstat_irqs on node 0 [ 0.663568] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.663577] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.663746] alloc irq_desc for 27 on node 0 [ 0.663749] alloc kstat_irqs on node 0 [ 0.663757] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.663766] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.663887] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.664019] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.664177] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.664182] ACPI: Power Button [PWRF] [ 0.664255] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.664258] ACPI: Power Button [PWRB] [ 0.664696] processor LNXCPU:00: registered as cooling_device0 [ 0.664704] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.664823] processor LNXCPU:01: registered as cooling_device1 [ 0.664830] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.668986] Linux agpgart interface v0.103 [ 0.668996] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.669103] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.669207] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.669516] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.669656] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.670975] brd: module loaded [ 0.671579] loop: module loaded [ 0.671674] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.671881] ata_piix 0000:00:1f.2: version 2.13 [ 0.671897] alloc irq_desc for 19 on node 0 [ 0.671900] alloc kstat_irqs on node 0 [ 0.671906] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.671913] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.671965] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.672039] scsi0 : ata_piix [ 0.672139] scsi1 : ata_piix [ 0.673047] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.673053] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.673170] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.673177] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.673220] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.673269] scsi2 : ata_piix [ 0.673334] scsi3 : ata_piix [ 0.674056] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19 [ 0.674061] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19 [ 0.674570] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.674603] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 0.674683] scsi4 : pata_jmicron [ 0.674771] scsi5 : pata_jmicron [ 0.675677] ata5: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16 [ 0.675680] ata6: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16 [ 0.676363] Fixed MDIO Bus: probed [ 0.676412] PPP generic driver version 2.4.2 [ 0.676518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.676677] alloc irq_desc for 18 on node 0 [ 0.676680] alloc kstat_irqs on node 0 [ 0.676687] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.676710] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.676714] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.676799] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.680726] ehci_hcd 0000:00:1a.7: cache line size of 128 is not supported [ 0.680740] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf5105000 [ 0.700026] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.700125] usb usb1: configuration #1 chosen from 1 choice [ 0.700164] hub 1-0:1.0: USB hub found [ 0.700174] hub 1-0:1.0: 6 ports detected [ 0.700280] alloc irq_desc for 23 on node 0 [ 0.700283] alloc kstat_irqs on node 0 [ 0.700290] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.700303] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.700307] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.700348] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.704246] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.704260] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5104000 [ 0.720013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.720087] usb usb2: configuration #1 chosen from 1 choice [ 0.720121] hub 2-0:1.0: USB hub found [ 0.720129] hub 2-0:1.0: 6 ports detected [ 0.720211] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.720233] uhci_hcd: USB Universal Host Controller Interface driver [ 0.720341] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.720350] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.720354] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.720398] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.720423] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 0.720520] usb usb3: configuration #1 chosen from 1 choice [ 0.720555] hub 3-0:1.0: USB hub found [ 0.720563] hub 3-0:1.0: 2 ports detected [ 0.720649] alloc irq_desc for 21 on node 0 [ 0.720652] alloc kstat_irqs on node 0 [ 0.720658] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.720666] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.720670] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.720713] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.720745] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 0.720839] usb usb4: configuration #1 chosen from 1 choice [ 0.720874] hub 4-0:1.0: USB hub found [ 0.720882] hub 4-0:1.0: 2 ports detected [ 0.720967] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.720974] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.720978] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.721019] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.721043] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 0.721138] usb usb5: configuration #1 chosen from 1 choice [ 0.721170] hub 5-0:1.0: USB hub found [ 0.721178] hub 5-0:1.0: 2 ports detected [ 0.721272] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.721280] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.721284] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.721333] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.721358] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 0.721453] usb usb6: configuration #1 chosen from 1 choice [ 0.721486] hub 6-0:1.0: USB hub found [ 0.721495] hub 6-0:1.0: 2 ports detected [ 0.721582] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.721589] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.721593] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.721632] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.721658] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 0.721756] usb usb7: configuration #1 chosen from 1 choice [ 0.721788] hub 7-0:1.0: USB hub found [ 0.721796] hub 7-0:1.0: 2 ports detected [ 0.721881] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.721888] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.721892] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.721936] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.721961] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 0.722050] usb usb8: configuration #1 chosen from 1 choice [ 0.722088] hub 8-0:1.0: USB hub found [ 0.722096] hub 8-0:1.0: 2 ports detected [ 0.722215] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.722218] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.722299] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.722382] mice: PS/2 mouse device common for all mice [ 0.722486] rtc_cmos 00:03: RTC can wake from S4 [ 0.722529] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.722556] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.722724] device-mapper: uevent: version 1.0.3 [ 0.722841] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.722929] device-mapper: multipath: version 1.1.0 loaded [ 0.722933] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.723139] cpuidle: using governor ladder [ 0.723143] cpuidle: using governor menu [ 0.723661] TCP cubic registered [ 0.723835] NET: Registered protocol family 10 [ 0.724371] lo: Disabled Privacy Extensions [ 0.724742] NET: Registered protocol family 17 [ 0.724766] Bluetooth: L2CAP ver 2.13 [ 0.724768] Bluetooth: L2CAP socket layer initialized [ 0.724771] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.724773] Bluetooth: SCO socket layer initialized [ 0.724805] Bluetooth: RFCOMM TTY layer initialized [ 0.724809] Bluetooth: RFCOMM socket layer initialized [ 0.724811] Bluetooth: RFCOMM ver 1.11 [ 0.724929] PM: Resume from disk failed. [ 0.724943] registered taskstats version 1 [ 0.725117] Magic number: 14:22:47 [ 0.725205] rtc_cmos 00:03: setting system clock to 2010-02-10 22:00:17 UTC (1265839217) [ 0.725208] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.725210] EDD information not available. [ 0.748895] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.842646] ata5.01: ATAPI: ASUS DVD-E616A2, 1.03, max UDMA/100 [ 0.880524] ata5.01: configured for UDMA/100 [ 1.030818] ata3: SATA link down (SStatus 0 SControl 300) [ 1.041678] ata4: SATA link down (SStatus 0 SControl 300) [ 1.200057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.200234] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.220369] ata2.00: ATAPI: Optiarc DVD RW AD-7201S, 1.09, max UDMA/100 [ 1.240210] ata1.00: HPA unlocked: 488395055 -> 488397168, native 488397168 [ 1.240217] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133 [ 1.240220] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.260015] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 1.260249] ata2.00: configured for UDMA/100 [ 1.280318] ata1.00: configured for UDMA/133 [ 1.280441] scsi 0:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 [ 1.280593] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.280644] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.280710] sd 0:0:0:0: [sda] Write Protect is off [ 1.280714] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.280748] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.280921] sda: [ 1.282732] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7201S 1.09 PQ: 0 ANSI: 5 [ 1.287730] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.287734] Uniform CD-ROM driver Revision: 3.20 [ 1.287831] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.287888] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.288498] scsi 4:0:1:0: CD-ROM ASUS DVD-E616A2 1.03 PQ: 0 ANSI: 5 [ 1.290551] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.290657] sr 4:0:1:0: Attached scsi CD-ROM sr1 [ 1.290718] sr 4:0:1:0: Attached scsi generic sg2 type 5 [ 1.300451] sda1 [ 1.300699] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.412206] usb 1-4: configuration #1 chosen from 1 choice [ 1.450095] Freeing unused kernel memory: 660k freed [ 1.450369] Write protecting the kernel read-only data: 7584k [ 1.531018] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.617587] Floppy drive(s): fd0 is 1.44M [ 1.626995] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.627022] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.627097] r8169 0000:04:00.0: setting latency timer to 64 [ 1.627165] alloc irq_desc for 28 on node 0 [ 1.627167] alloc kstat_irqs on node 0 [ 1.627184] r8169 0000:04:00.0: irq 28 for MSI/MSI-X [ 1.627957] eth0: RTL8168b/8111b at 0xffffc90011102000, 00:1a:4d:51:7b:0a, XID 38000000 IRQ 28 [ 1.649120] FDC 0 is a post-1991 82077 [ 1.680211] ohci1394 0000:05:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.693464] Initializing USB Mass Storage driver... [ 1.693596] scsi6 : SCSI emulation for USB Mass Storage devices [ 1.693689] usb-storage: device found at 4 [ 1.693694] usb-storage: waiting for device to settle before scanning [ 1.693702] usbcore: registered new interface driver usb-storage [ 1.693706] USB Mass Storage support registered. [ 1.740744] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f5004000-f50047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.791883] usb 2-1: configuration #1 chosen from 1 choice [ 1.794573] scsi7 : SCSI emulation for USB Mass Storage devices [ 1.794851] usb-storage: device found at 2 [ 1.794855] usb-storage: waiting for device to settle before scanning [ 2.090010] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.280502] usb 3-1: configuration #1 chosen from 1 choice [ 2.292106] usbcore: registered new interface driver hiddev [ 2.294631] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input4 [ 2.294739] generic-usb 0003:046D:C51A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0 [ 2.299511] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input5 [ 2.299629] generic-usb 0003:046D:C51A.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1 [ 2.299648] usbcore: registered new interface driver usbhid [ 2.299652] usbhid: v2.6:USB HID core driver [ 2.561278] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 2.654434] EXT4-fs (loop0): barriers enabled [ 2.674658] kjournald2 starting: pid 443, dev loop0:8, commit interval 5 seconds [ 2.674680] EXT4-fs (loop0): delayed allocation enabled [ 2.674685] EXT4-fs: file extents enabled [ 2.676322] EXT4-fs: mballoc enabled [ 2.676341] EXT4-fs (loop0): mounted filesystem with ordered data mode [ 2.720518] usb 3-2: configuration #1 chosen from 1 choice [ 3.060168] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c672de00001a4d] [ 3.365601] type=1505 audit(1265839220.134:2): operation="profile_load" pid=469 name=/usr/share/gdm/guest-session/Xsession [ 3.368450] type=1505 audit(1265839220.134:3): operation="profile_load" pid=470 name=/sbin/dhclient3 [ 3.369169] type=1505 audit(1265839220.134:4): operation="profile_load" pid=470 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.369562] type=1505 audit(1265839220.134:5): operation="profile_load" pid=470 name=/usr/lib/connman/scripts/dhclient-script [ 3.420856] type=1505 audit(1265839220.194:6): operation="profile_load" pid=471 name=/usr/bin/evince [ 3.432290] type=1505 audit(1265839220.204:7): operation="profile_load" pid=471 name=/usr/bin/evince-previewer [ 3.438962] type=1505 audit(1265839220.204:8): operation="profile_load" pid=471 name=/usr/bin/evince-thumbnailer [ 3.455286] type=1505 audit(1265839220.224:9): operation="profile_load" pid=473 name=/usr/lib/cups/backend/cups-pdf [ 3.456118] type=1505 audit(1265839220.224:10): operation="profile_load" pid=473 name=/usr/sbin/cupsd [ 4.624644] udev: starting version 147 [ 5.663967] parport_pc 00:09: reported by Plug and Play ACPI [ 5.664014] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 5.723299] lp: driver loaded but no devices found [ 5.760219] lp0: using parport0 (interrupt-driven). [ 5.767440] ppdev: user-space parallel port driver [ 5.815137] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.150716] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 6.150723] Disabling lock debugging due to kernel taint [ 6.172098] [fglrx] Maximum main memory to use for locked dma buffers: 3800 MBytes. [ 6.172240] [fglrx] vendor: 1002 device: 94c3 count: 1 [ 6.172776] [fglrx] ioport: bar 4, base 0xb000, size: 0x100 [ 6.172795] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.172802] pci 0000:01:00.0: setting latency timer to 64 [ 6.173270] [fglrx] Kernel PAT support is enabled [ 6.173327] [fglrx] module loaded - fglrx 8.66.10 [Sep 3 2009] with 1 minors [ 6.691375] usb-storage: device scan complete [ 6.691861] scsi 6:0:0:0: Direct-Access Maxtor OneTouch 0125 PQ: 0 ANSI: 4 [ 6.692397] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 6.694632] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 6.695219] sd 6:0:0:0: [sdb] Write Protect is off [ 6.695223] sd 6:0:0:0: [sdb] Mode Sense: 2d 08 00 00 [ 6.695226] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 6.696586] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 6.696591] sdb: sdb1 [ 6.718033] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 6.718040] sd 6:0:0:0: [sdb] Attached SCSI disk [ 6.800267] usb-storage: device scan complete [ 6.830521] scsi 7:0:0:0: Direct-Access Generic 2.0 Reader-CF 1.00 PQ: 0 ANSI: 0 CCS [ 6.860760] scsi 7:0:0:1: Direct-Access Generic 2.0 Reader-Multi 1.00 PQ: 0 ANSI: 0 CCS [ 6.861363] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 6.861529] sd 7:0:0:1: Attached scsi generic sg5 type 0 [ 6.871261] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 6.872430] sd 7:0:0:1: [sdd] Attached SCSI removable disk [ 6.942956] alloc irq_desc for 22 on node 0 [ 6.942961] alloc kstat_irqs on node 0 [ 6.942970] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.943037] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.105387] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 7.114392] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.114460] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 9.798076] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262136k [ 9.851560] EXT4-fs (loop0): internal journal on loop0:8 [ 10.694140] __ratelimit: 3 callbacks suppressed [ 10.694145] type=1505 audit(1265832027.464:12): operation="profile_replace" pid=964 name=/usr/share/gdm/guest-session/Xsession [ 10.696287] type=1505 audit(1265832027.464:13): operation="profile_replace" pid=966 name=/sbin/dhclient3 [ 10.697005] type=1505 audit(1265832027.464:14): operation="profile_replace" pid=966 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.697400] type=1505 audit(1265832027.464:15): operation="profile_replace" pid=966 name=/usr/lib/connman/scripts/dhclient-script [ 10.702630] type=1505 audit(1265832027.474:16): operation="profile_replace" pid=967 name=/usr/bin/evince [ 10.714414] type=1505 audit(1265832027.484:17): operation="profile_replace" pid=967 name=/usr/bin/evince-previewer [ 10.722726] type=1505 audit(1265832027.494:18): operation="profile_replace" pid=967 name=/usr/bin/evince-thumbnailer [ 10.733280] type=1505 audit(1265832027.504:19): operation="profile_replace" pid=971 name=/usr/lib/cups/backend/cups-pdf [ 10.734116] type=1505 audit(1265832027.504:20): operation="profile_replace" pid=971 name=/usr/sbin/cupsd [ 10.736915] type=1505 audit(1265832027.504:21): operation="profile_replace" pid=972 name=/usr/sbin/tcpdump [ 12.491661] usplash:389 freeing invalid memtype ffffffffe0000000-ffffffffe1000000 [ 12.747228] r8169: eth0: link up [ 12.747239] r8169: eth0: link up [ 15.119567] alloc irq_desc for 29 on node 0 [ 15.119573] alloc kstat_irqs on node 0 [ 15.119587] fglrx_pci 0000:01:00.0: irq 29 for MSI/MSI-X [ 15.120398] [fglrx] Firegl kernel thread PID: 1494 [ 15.880024] CPU0 attaching NULL sched-domain. [ 15.880033] CPU1 attaching NULL sched-domain. [ 15.921320] CPU0 attaching sched-domain: [ 15.921326] domain 0: span 0-1 level MC [ 15.921329] groups: 0 1 [ 15.921335] domain 1: span 0-1 level CPU [ 15.921338] groups: 0-1 (__cpu_power = 2048) [ 15.921345] CPU1 attaching sched-domain: [ 15.921348] domain 0: span 0-1 level MC [ 15.921351] groups: 1 0 [ 15.921356] domain 1: span 0-1 level CPU [ 15.921359] groups: 0-1 (__cpu_power = 2048) [ 17.364436] [fglrx] Gart USWC size:1237 M. [ 17.364441] [fglrx] Gart cacheable size:491 M. [ 17.364448] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 17.364451] [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000 [ 17.364455] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000 [ 20.745298] CPU0 attaching NULL sched-domain. [ 20.745308] CPU1 attaching NULL sched-domain. [ 20.761580] CPU0 attaching sched-domain: [ 20.761586] domain 0: span 0-1 level CPU [ 20.761590] groups: 0 1 [ 20.761597] CPU1 attaching sched-domain: [ 20.761600] domain 0: span 0-1 level CPU [ 20.761603] groups: 1 0 [ 23.370018] eth0: no IPv6 routers present [ 24.905088] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 71.790160] usb 3-1: USB disconnect, address 2 [ 75.570026] usb 3-1: new full speed USB device using uhci_hcd and address 4 [ 75.761132] usb 3-1: configuration #1 chosen from 1 choice [ 75.769292] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input7 [ 75.769422] generic-usb 0003:046D:C51A.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0 [ 75.775496] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input8 [ 75.775652] generic-usb 0003:046D:C51A.0004: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1 [ 1859.130024] usb 1-4: reset high speed USB device using ehci_hcd and address 4 [ 5459.161284] usb 1-4: reset high speed USB device using ehci_hcd and address 4