[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-16-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f576000 (usable) [ 0.000000] BIOS-e820: 000000003f576000 - 000000003f5bf000 (reserved) [ 0.000000] BIOS-e820: 000000003f5bf000 - 000000003f66d000 (usable) [ 0.000000] BIOS-e820: 000000003f66d000 - 000000003f6bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f6bf000 - 000000003f6ef000 (usable) [ 0.000000] BIOS-e820: 000000003f6ef000 - 000000003f6ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable) [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x3f700 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFF00000 mask 0FFF00000 write-protect [ 0.000000] 1 base 0FFFC0000 mask 0FFFE0000 uncachable [ 0.000000] 2 base 000000000 mask 0E0000000 write-back [ 0.000000] 3 base 020000000 mask 0E0000000 write-back [ 0.000000] 4 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 5 base 03F700000 mask 0FFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 base 000000000 mask 0FFFE0000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f576000 (usable) [ 0.000000] modified: 000000003f576000 - 000000003f5bf000 (reserved) [ 0.000000] modified: 000000003f5bf000 - 000000003f66d000 (usable) [ 0.000000] modified: 000000003f66d000 - 000000003f6bf000 (ACPI NVS) [ 0.000000] modified: 000000003f6bf000 - 000000003f6ef000 (usable) [ 0.000000] modified: 000000003f6ef000 - 000000003f6ff000 (ACPI data) [ 0.000000] modified: 000000003f6ff000 - 000000003f700000 (usable) [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2f10d000 - 2f85847e [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACER ) [ 0.000000] ACPI: XSDT 3f6fe120 00064 (v01 ACER ACER 00000001 01000013) [ 0.000000] ACPI: FACP 3f6fc000 000F4 (v04 ACER ACER 00000001 1025 01000013) [ 0.000000] ACPI: DSDT 3f6f1000 06D91 (v01 ACER ACER 00000001 1025 01000013) [ 0.000000] ACPI: FACS 3f688000 00040 [ 0.000000] ACPI: SSDT 3f6fd000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: HPET 3f6fb000 00038 (v01 ACER ACER 00000001 1025 01000013) [ 0.000000] ACPI: APIC 3f6fa000 00068 (v02 ACER ACER 00000001 1025 01000013) [ 0.000000] ACPI: MCFG 3f6f9000 0003C (v01 ACER ACER 00000001 1025 01000013) [ 0.000000] ACPI: ASF! 3f6f8000 000A5 (v32 ACER ACER 00000001 1025 01000013) [ 0.000000] ACPI: SLIC 3f6f0000 00180 (v01 ACER ACER 00000001 1025 01000013) [ 0.000000] ACPI: BOOT 3f6ef000 00028 (v01 ACER ACER 00000001 1025 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [002f10d000 - 002f85847e] RAMDISK ==> [002f10d000 - 002f85847e] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac178] BRK ==> [00008a9000 - 00008ac178] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f700 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f576 [ 0.000000] 0: 0x0003f5bf -> 0x0003f66d [ 0.000000] 0: 0x0003f6bf -> 0x0003f6ef [ 0.000000] 0: 0x0003f6ff -> 0x0003f700 [ 0.000000] On node 0 totalpages: 259568 [ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32088 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c17f4000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257537 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=63c45839-b045-40fb-811b-31e5f13ede4d ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5196800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f700) [ 0.000000] Memory: 1008344k/1039360k available (4566k kernel code, 29484k reserved, 2142k data, 540k init, 129372k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1595.746 MHz processor. [ 0.001968] Console: colour VGA+ 80x25 [ 0.001975] console [tty0] enabled [ 0.002229] hpet clockevent registered [ 0.002237] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.002248] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.49 BogoMIPS (lpj=6382984) [ 0.002285] Security Framework initialized [ 0.002325] AppArmor: AppArmor initialized [ 0.002340] Mount-cache hash table entries: 512 [ 0.002569] Initializing cgroup subsys ns [ 0.002579] Initializing cgroup subsys cpuacct [ 0.002588] Initializing cgroup subsys memory [ 0.002599] Initializing cgroup subsys freezer [ 0.002604] Initializing cgroup subsys net_cls [ 0.002632] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.002638] CPU: L2 cache: 512K [ 0.002643] CPU: Physical Processor ID: 0 [ 0.002647] CPU: Processor Core ID: 0 [ 0.002654] mce: CPU supports 5 MCE banks [ 0.002668] CPU0: Thermal monitoring enabled (TM2) [ 0.002675] using mwait in idle threads. [ 0.002686] Performance Counters: Atom events, Intel PMU driver. [ 0.002701] ... version: 3 [ 0.002706] ... bit width: 40 [ 0.002710] ... generic counters: 2 [ 0.002714] ... value mask: 000000ffffffffff [ 0.002719] ... max period: 000000007fffffff [ 0.002724] ... fixed-purpose counters: 3 [ 0.002728] ... counter mask: 0000000700000003 [ 0.002737] Checking 'hlt' instruction... OK. [ 0.020015] ACPI: Core revision 20090521 [ 0.040506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081302] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3191.93 BogoMIPS (lpj=6383876) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] mce: CPU supports 5 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.169002] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.169037] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172038] Brought up 2 CPUs [ 0.172045] Total of 2 processors activated (6383.43 BogoMIPS). [ 0.172113] CPU0 attaching sched-domain: [ 0.172120] domain 0: span 0-1 level SIBLING [ 0.172125] groups: 0 1 [ 0.172136] CPU1 attaching sched-domain: [ 0.172141] domain 0: span 0-1 level SIBLING [ 0.172146] groups: 1 0 [ 0.172303] Booting paravirtualized kernel on bare hardware [ 0.172484] regulator: core version 0.5 [ 0.172484] Time: 8:57:51 Date: 12/29/09 [ 0.172484] NET: Registered protocol family 16 [ 0.172484] EISA bus registered [ 0.172484] ACPI: bus type pci registered [ 0.172597] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.172605] PCI: MCFG area at e0000000 reserved in E820 [ 0.172609] PCI: Using MMCONFIG for extended config space [ 0.172614] PCI: Using configuration type 1 for base access [ 0.176967] bio: create slab at 0 [ 0.177911] ACPI: EC: Look up EC in DSDT [ 0.215232] ACPI: BIOS _OSI(Linux) query ignored [ 0.216065] ACPI: Interpreter enabled [ 0.216076] ACPI: (supports S0 S3 S4 S5) [ 0.216128] ACPI: Using IOAPIC for interrupt routing [ 0.248054] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.358055] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.360436] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.360442] ACPI: EC: driver started in interrupt mode [ 0.360576] ACPI: Power Resource [FN00] (on) [ 0.361038] ACPI: No dock devices found. [ 0.362290] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.362305] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014a50), AE_ALREADY_EXISTS [ 0.362324] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 0.362376] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.362532] pci 0000:00:02.0: reg 10 32bit mmio: [0x56280000-0x562fffff] [ 0.362542] pci 0000:00:02.0: reg 14 io port: [0x50f0-0x50f7] [ 0.362552] pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x4fffffff] [ 0.362561] pci 0000:00:02.0: reg 1c 32bit mmio: [0x56300000-0x5633ffff] [ 0.362615] pci 0000:00:02.1: reg 10 32bit mmio: [0x56200000-0x5627ffff] [ 0.362756] pci 0000:00:1b.0: reg 10 64bit mmio: [0x56340000-0x56343fff] [ 0.362829] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.362838] pci 0000:00:1b.0: PME# disabled [ 0.362942] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.362950] pci 0000:00:1c.0: PME# disabled [ 0.363056] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.363064] pci 0000:00:1c.1: PME# disabled [ 0.363170] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.363178] pci 0000:00:1c.2: PME# disabled [ 0.363261] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] [ 0.363340] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f] [ 0.363419] pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f] [ 0.363498] pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f] [ 0.363582] pci 0000:00:1d.7: reg 10 32bit mmio: [0x56344400-0x563447ff] [ 0.363656] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.363665] pci 0000:00:1d.7: PME# disabled [ 0.363865] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.363874] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.363885] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003) [ 0.363893] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007) [ 0.363960] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.363973] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.363985] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.364013] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.364025] pci 0000:00:1f.1: reg 20 io port: [0x50c0-0x50cf] [ 0.364106] pci 0000:00:1f.2: reg 10 io port: [0x50d8-0x50df] [ 0.364119] pci 0000:00:1f.2: reg 14 io port: [0x50fc-0x50ff] [ 0.364131] pci 0000:00:1f.2: reg 18 io port: [0x50d0-0x50d7] [ 0.364143] pci 0000:00:1f.2: reg 1c io port: [0x50f8-0x50fb] [ 0.364155] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x502f] [ 0.364168] pci 0000:00:1f.2: reg 24 32bit mmio: [0x56344000-0x563443ff] [ 0.364213] pci 0000:00:1f.2: PME# supported from D3hot [ 0.364221] pci 0000:00:1f.2: PME# disabled [ 0.364298] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f] [ 0.364423] pci 0000:01:00.0: reg 10 64bit mmio: [0x55100000-0x5510ffff] [ 0.364526] pci 0000:01:00.0: supports D1 D2 [ 0.364531] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.364540] pci 0000:01:00.0: PME# disabled [ 0.364632] pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff] [ 0.364642] pci 0000:00:1c.0: bridge 32bit mmio: [0x55100000-0x561fffff] [ 0.364655] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff] [ 0.364728] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.364737] pci 0000:00:1c.1: bridge 32bit mmio: [0x54100000-0x550fffff] [ 0.364750] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x51ffffff] [ 0.364836] pci 0000:03:00.0: reg 10 64bit mmio: [0x53000000-0x5303ffff] [ 0.364851] pci 0000:03:00.0: reg 18 io port: [0x1000-0x107f] [ 0.364947] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.364956] pci 0000:03:00.0: PME# disabled [ 0.365046] pci 0000:00:1c.2: bridge io port: [0x1000-0x2fff] [ 0.365055] pci 0000:00:1c.2: bridge 32bit mmio: [0x53000000-0x540fffff] [ 0.365071] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52000000-0x52ffffff] [ 0.365149] pci 0000:00:1e.0: transparent bridge [ 0.365195] pci_bus 0000:00: on NUMA node 0 [ 0.365208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.365601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.365837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.366011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.366398] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.366413] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014a50), AE_ALREADY_EXISTS [ 0.373365] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.373611] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.373852] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.374091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.374333] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.374576] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.374821] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.375065] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.375474] SCSI subsystem initialized [ 0.375558] libata version 3.00 loaded. [ 0.375558] usbcore: registered new interface driver usbfs [ 0.375558] usbcore: registered new interface driver hub [ 0.375558] usbcore: registered new device driver usb [ 0.376245] ACPI: WMI: Mapper loaded [ 0.376251] PCI: Using ACPI for IRQ routing [ 0.388023] Bluetooth: Core ver 2.15 [ 0.388069] NET: Registered protocol family 31 [ 0.388069] Bluetooth: HCI device and connection manager initialized [ 0.388069] Bluetooth: HCI socket layer initialized [ 0.388069] NetLabel: Initializing [ 0.388069] NetLabel: domain hash size = 128 [ 0.388069] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.388080] NetLabel: unlabeled traffic allowed by default [ 0.388151] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.388163] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.408028] pnp: PnP ACPI init [ 0.408068] ACPI: bus type pnp registered [ 0.472710] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.2 BAR 13 (0x1000-0x2fff), disabling [ 0.474277] pnp: PnP ACPI: found 9 devices [ 0.474284] ACPI: ACPI bus type pnp unregistered [ 0.474292] PnPBIOS: Disabled by ACPI PNP [ 0.474319] system 00:01: ioport range 0x200-0x20f has been reserved [ 0.474327] system 00:01: ioport range 0x600-0x60f has been reserved [ 0.474334] system 00:01: ioport range 0x610-0x610 has been reserved [ 0.474341] system 00:01: ioport range 0x800-0x80f has been reserved [ 0.474348] system 00:01: ioport range 0x400-0x47f has been reserved [ 0.474355] system 00:01: ioport range 0x500-0x53f has been reserved [ 0.474363] system 00:01: ioport range 0xff2c-0xff2f has been reserved [ 0.474372] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.474380] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.474387] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.474395] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.474402] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.474410] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.474418] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.501091] Switched to high resolution mode on CPU 1 [ 0.504013] Switched to high resolution mode on CPU 0 [ 0.509297] AppArmor: AppArmor Filesystem Enabled [ 0.509383] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.509390] pci 0000:00:1c.0: IO window: 0x4000-0x4fff [ 0.509401] pci 0000:00:1c.0: MEM window: 0x55100000-0x561fffff [ 0.509410] pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff [ 0.509423] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.509430] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.509440] pci 0000:00:1c.1: MEM window: 0x54100000-0x550fffff [ 0.509449] pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x00000051ffffff [ 0.509462] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 0.509469] pci 0000:00:1c.2: IO window: 0x1000-0x2fff [ 0.509479] pci 0000:00:1c.2: MEM window: 0x53000000-0x540fffff [ 0.509488] pci 0000:00:1c.2: PREFETCH window: 0x00000052000000-0x00000052ffffff [ 0.509500] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.509505] pci 0000:00:1e.0: IO window: disabled [ 0.509514] pci 0000:00:1e.0: MEM window: disabled [ 0.509522] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.509545] alloc irq_desc for 16 on node -1 [ 0.509550] alloc kstat_irqs on node -1 [ 0.509562] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.509572] pci 0000:00:1c.0: setting latency timer to 64 [ 0.509587] pci 0000:00:1c.1: enabling device (0000 -> 0003) [ 0.509595] alloc irq_desc for 17 on node -1 [ 0.509599] alloc kstat_irqs on node -1 [ 0.509608] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.509618] pci 0000:00:1c.1: setting latency timer to 64 [ 0.509632] alloc irq_desc for 18 on node -1 [ 0.509636] alloc kstat_irqs on node -1 [ 0.509644] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.509653] pci 0000:00:1c.2: setting latency timer to 64 [ 0.509666] pci 0000:00:1e.0: setting latency timer to 64 [ 0.509676] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.509683] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.509689] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.509695] pci_bus 0000:01: resource 1 mem: [0x55100000-0x561fffff] [ 0.509702] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff] [ 0.509708] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.509714] pci_bus 0000:02: resource 1 mem: [0x54100000-0x550fffff] [ 0.509721] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x51ffffff] [ 0.509727] pci_bus 0000:03: resource 0 io: [0x1000-0x2fff] [ 0.509733] pci_bus 0000:03: resource 1 mem: [0x53000000-0x540fffff] [ 0.509740] pci_bus 0000:03: resource 2 pref mem [0x52000000-0x52ffffff] [ 0.509746] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.509752] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.509829] NET: Registered protocol family 2 [ 0.510036] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.510712] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.511667] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.512153] TCP: Hash tables configured (established 131072 bind 65536) [ 0.512161] TCP reno registered [ 0.512368] NET: Registered protocol family 1 [ 0.512516] Trying to unpack rootfs image as initramfs... [ 0.875291] Freeing initrd memory: 7469k freed [ 0.882386] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.882395] Simple Boot Flag at 0x44 set to 0x1 [ 0.882792] cpufreq-nforce2: No nForce2 chipset. [ 0.882851] Scanning for low memory corruption every 60 seconds [ 0.883068] audit: initializing netlink socket (disabled) [ 0.883098] type=2000 audit(1262077070.880:1): initialized [ 0.900783] highmem bounce pool size: 64 pages [ 0.900797] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.904020] VFS: Disk quotas dquot_6.5.2 [ 0.904151] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.905409] fuse init (API version 7.12) [ 0.905592] msgmni has been set to 1732 [ 0.906084] alg: No test for stdrng (krng) [ 0.906119] io scheduler noop registered [ 0.906124] io scheduler anticipatory registered [ 0.906129] io scheduler deadline registered [ 0.906239] io scheduler cfq registered (default) [ 0.906265] pci 0000:00:02.0: Boot video device [ 0.906706] alloc irq_desc for 24 on node -1 [ 0.906712] alloc kstat_irqs on node -1 [ 0.906733] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.906750] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.906974] alloc irq_desc for 25 on node -1 [ 0.906979] alloc kstat_irqs on node -1 [ 0.906993] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.907009] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.907227] alloc irq_desc for 26 on node -1 [ 0.907232] alloc kstat_irqs on node -1 [ 0.907246] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.907261] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.907448] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.907670] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.907686] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014a50), AE_ALREADY_EXISTS [ 0.907951] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.907965] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014a50), AE_ALREADY_EXISTS [ 0.908251] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.908265] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014a50), AE_ALREADY_EXISTS [ 0.908552] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.908566] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014a50), AE_ALREADY_EXISTS [ 0.908812] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.908826] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014a50), AE_ALREADY_EXISTS [ 0.909081] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.909095] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014a50), AE_ALREADY_EXISTS [ 0.909192] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.972165] ACPI: AC Adapter [AC] (off-line) [ 0.972316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.972325] ACPI: Power Button [PWRF] [ 0.972448] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.972455] ACPI: Power Button [PWRB] [ 0.972547] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.972631] ACPI: Lid Switch [LID0] [ 0.972733] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 0.972740] ACPI: Sleep Button [SLPB] [ 0.973040] fan PNP0C0B:00: registered as cooling_device0 [ 0.973053] ACPI: Fan [FAN] (on) [ 0.974397] ACPI: SSDT 3f592c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.975208] ACPI: SSDT 3f591e10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.976801] Marking TSC unstable due to TSC halts in idle [ 0.976841] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.976888] processor LNXCPU:00: registered as cooling_device1 [ 0.976896] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.977647] ACPI: SSDT 3f592f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.978373] ACPI: SSDT 3f590f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.980058] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.980113] processor LNXCPU:01: registered as cooling_device2 [ 0.980123] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.042901] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.042918] ACPI: Thermal Zone [THRM] (27 C) [ 1.043063] isapnp: Scanning for PnP cards... [ 1.397098] isapnp: No Plug & Play device found [ 1.704205] ACPI: Battery Slot [BAT0] (battery present) [ 1.704515] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.707127] brd: module loaded [ 1.708183] loop: module loaded [ 1.708363] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.708533] ahci 0000:00:1f.2: version 3.0 [ 1.708562] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.708629] alloc irq_desc for 27 on node -1 [ 1.708635] alloc kstat_irqs on node -1 [ 1.708656] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 1.708719] ahci: SSS flag set, parallel bus scan disabled [ 1.708770] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode [ 1.708779] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part [ 1.708790] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.709174] scsi0 : ahci [ 1.709423] scsi1 : ahci [ 1.709561] scsi2 : ahci [ 1.709693] scsi3 : ahci [ 1.710068] ata1: SATA max UDMA/133 abar m1024@0x56344000 port 0x56344100 irq 27 [ 1.710075] ata2: DUMMY [ 1.710081] ata3: SATA max UDMA/133 abar m1024@0x56344000 port 0x56344200 irq 27 [ 1.710086] ata4: DUMMY [ 1.710246] ata_piix 0000:00:1f.1: version 2.13 [ 1.710280] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.710360] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.710511] scsi4 : ata_piix [ 1.710655] scsi5 : ata_piix [ 1.711688] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14 [ 1.711697] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15 [ 1.712066] ata6: port disabled. ignoring. [ 1.713752] Fixed MDIO Bus: probed [ 1.713839] PPP generic driver version 2.4.2 [ 1.714048] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.714093] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.714124] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.714132] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.714239] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.718164] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.718175] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.718209] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56344400 [ 1.732031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.732197] usb usb1: configuration #1 chosen from 1 choice [ 1.732268] hub 1-0:1.0: USB hub found [ 1.732284] hub 1-0:1.0: 8 ports detected [ 1.732424] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.732465] uhci_hcd: USB Universal Host Controller Interface driver [ 1.732536] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.732551] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.732558] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.732634] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.732676] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0 [ 1.732854] usb usb2: configuration #1 chosen from 1 choice [ 1.732915] hub 2-0:1.0: USB hub found [ 1.732944] hub 2-0:1.0: 2 ports detected [ 1.733040] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.733053] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.733060] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.733127] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.733180] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080 [ 1.733351] usb usb3: configuration #1 chosen from 1 choice [ 1.733412] hub 3-0:1.0: USB hub found [ 1.733426] hub 3-0:1.0: 2 ports detected [ 1.733527] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.733540] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.733547] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.733613] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.733662] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060 [ 1.733836] usb usb4: configuration #1 chosen from 1 choice [ 1.733897] hub 4-0:1.0: USB hub found [ 1.733911] hub 4-0:1.0: 2 ports detected [ 1.734004] alloc irq_desc for 19 on node -1 [ 1.734010] alloc kstat_irqs on node -1 [ 1.734023] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.734034] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.734041] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.734114] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.734164] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040 [ 1.734331] usb usb5: configuration #1 chosen from 1 choice [ 1.734393] hub 5-0:1.0: USB hub found [ 1.734409] hub 5-0:1.0: 2 ports detected [ 1.734611] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 1.765937] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.765952] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.766126] mice: PS/2 mouse device common for all mice [ 1.766411] rtc_cmos 00:03: RTC can wake from S4 [ 1.766502] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.766550] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.766864] device-mapper: uevent: version 1.0.3 [ 1.767126] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.767304] device-mapper: multipath: version 1.1.0 loaded [ 1.767311] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.767654] EISA: Probing bus 0 at eisa.0 [ 1.767667] Cannot allocate resource for EISA slot 1 [ 1.767673] Cannot allocate resource for EISA slot 2 [ 1.767678] Cannot allocate resource for EISA slot 3 [ 1.767683] Cannot allocate resource for EISA slot 4 [ 1.767688] Cannot allocate resource for EISA slot 5 [ 1.767710] EISA: Detected 0 cards. [ 1.768136] cpuidle: using governor ladder [ 1.768395] cpuidle: using governor menu [ 1.769534] TCP cubic registered [ 1.769909] NET: Registered protocol family 10 [ 1.770872] lo: Disabled Privacy Extensions [ 1.771586] NET: Registered protocol family 17 [ 1.771630] Bluetooth: L2CAP ver 2.13 [ 1.771634] Bluetooth: L2CAP socket layer initialized [ 1.771640] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.771644] Bluetooth: SCO socket layer initialized [ 1.771755] Bluetooth: RFCOMM TTY layer initialized [ 1.771764] Bluetooth: RFCOMM socket layer initialized [ 1.771771] Bluetooth: RFCOMM ver 1.11 [ 1.773580] Using IPI No-Shortcut mode [ 1.773740] PM: Resume from disk failed. [ 1.773766] registered taskstats version 1 [ 1.774008] Magic number: 5:506:979 [ 1.774137] rtc_cmos 00:03: setting system clock to 2009-12-29 08:57:52 UTC (1262077072) [ 1.774146] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.774150] EDD information not available. [ 1.792496] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 2.000120] Clocksource tsc unstable (delta = -206125911 ns) [ 2.028161] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.029776] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.030125] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133 [ 2.030139] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.032078] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.032438] ata1.00: configured for UDMA/133 [ 2.048521] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5 [ 2.048879] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.049006] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.049160] sd 0:0:0:0: [sda] Write Protect is off [ 2.049168] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.049238] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.049587] sda: [ 2.156097] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 2.297459] sda1 sda2 sda3 < sda5 [ 2.368093] ata3: SATA link down (SStatus 0 SControl 300) [ 2.399958] sda6 > [ 2.400897] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.400946] Freeing unused kernel memory: 540k freed [ 2.401473] Write protecting the kernel text: 4568k [ 2.401555] Write protecting the kernel read-only data: 1836k [ 2.467429] usb 1-2: configuration #1 chosen from 1 choice [ 2.722113] Linux agpgart interface v0.103 [ 2.724075] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 2.733405] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 2.733728] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 2.736610] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 [ 2.792959] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 2.793620] acpi device:1a: registered as cooling_device3 [ 2.794076] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:16/input/input6 [ 2.794198] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no) [ 2.913315] [drm] Initialized drm 1.1.0 20060810 [ 2.941245] usb 2-1: configuration #1 chosen from 1 choice [ 2.973054] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.973070] i915 0000:00:02.0: setting latency timer to 64 [ 3.203360] [drm] fb0: inteldrmfb frame buffer device [ 3.203378] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.530398] [drm] LVDS-8: set mode 1024x600 e [ 3.969424] Console: switching to colour frame buffer device 128x37 [ 4.945451] PM: Starting manual resume from disk [ 4.945460] PM: Resume from partition 8:6 [ 4.945465] PM: Checking hibernation image. [ 4.946378] PM: Resume from disk failed. [ 5.022642] EXT4-fs (sda5): barriers enabled [ 5.057247] kjournald2 starting: pid 371, dev sda5:8, commit interval 5 seconds [ 5.057292] EXT4-fs (sda5): delayed allocation enabled [ 5.057306] EXT4-fs: file extents enabled [ 5.074837] EXT4-fs: mballoc enabled [ 5.074870] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 5.994916] type=1505 audit(1262077076.717:2): operation="profile_load" pid=394 name=/sbin/dhclient3 [ 5.995505] type=1505 audit(1262077076.717:3): operation="profile_load" pid=394 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.995834] type=1505 audit(1262077076.717:4): operation="profile_load" pid=394 name=/usr/lib/connman/scripts/dhclient-script [ 6.070045] type=1505 audit(1262077076.793:5): operation="profile_load" pid=395 name=/usr/bin/evince [ 6.079327] type=1505 audit(1262077076.801:6): operation="profile_load" pid=395 name=/usr/bin/evince-previewer [ 6.085065] type=1505 audit(1262077076.809:7): operation="profile_load" pid=395 name=/usr/bin/evince-thumbnailer [ 6.120080] type=1505 audit(1262077076.845:8): operation="profile_load" pid=397 name=/usr/lib/cups/backend/cups-pdf [ 6.120813] type=1505 audit(1262077076.845:9): operation="profile_load" pid=397 name=/usr/sbin/cupsd [ 6.125412] type=1505 audit(1262077076.849:10): operation="profile_load" pid=398 name=/usr/sbin/tcpdump [ 13.710715] udev: starting version 147 [ 13.738024] Adding 2755108k swap on /dev/sda6. Priority:-1 extents:1 across:2755108k [ 13.760804] lp: driver loaded but no devices found [ 13.950127] EXT4-fs (sda5): internal journal on sda5:8 [ 14.164639] intel_rng: FWH not detected [ 14.476336] atl1c 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 14.476363] atl1c 0000:03:00.0: setting latency timer to 64 [ 14.476450] atl1c 0000:03:00.0: PME# disabled [ 14.476464] atl1c 0000:03:00.0: PME# disabled [ 14.507733] cdc_acm 2-1:1.0: ttyACM0: USB ACM device [ 14.511664] usbcore: registered new interface driver cdc_acm [ 14.511677] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 14.519262] Linux video capture interface: v2.00 [ 14.534998] cfg80211: Calling CRDA to update world regulatory domain [ 14.551101] uvcvideo: Found UVC 1.00 device WebCam (064e:d101) [ 14.562171] atl1c 0000:03:00.0: version 1.0.0.1-NAPI [ 14.566480] cfg80211: World regulatory domain updated: [ 14.566491] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.566503] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.566512] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.566521] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.566531] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.566540] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.589884] acer-wmi: Acer Laptop ACPI-WMI Extras [ 14.593273] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input7 [ 14.593418] usbcore: registered new interface driver uvcvideo [ 14.593428] USB Video Class driver (v0.1.0) [ 14.696201] ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.696229] ath5k 0000:01:00.0: setting latency timer to 64 [ 14.696316] ath5k 0000:01:00.0: registered as 'phy0' [ 14.776105] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.796971] acer-wmi: Unable to detect available WMID devices [ 14.849110] ath: EEPROM regdomain: 0x65 [ 14.849120] ath: EEPROM indicates we should expect a direct regpair map [ 14.849130] ath: Country alpha2 being used: 00 [ 14.849136] ath: Regpair used: 0x65 [ 15.081185] alloc irq_desc for 28 on node -1 [ 15.081195] alloc kstat_irqs on node -1 [ 15.081228] atl1c 0000:03:00.0: irq 28 for MSI/MSI-X [ 15.082095] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.186123] phy0: Selected rate control algorithm 'minstrel' [ 15.188470] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 15.394566] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.394639] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.573734] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.632986] hda_codec: Unknown model for ALC272, trying auto-probe from BIOS... [ 15.634239] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 15.871146] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000 [ 15.897942] type=1505 audit(1262095086.621:11): operation="profile_replace" pid=903 name=/sbin/dhclient3 [ 15.898831] type=1505 audit(1262095086.621:12): operation="profile_replace" pid=903 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 15.899329] type=1505 audit(1262095086.621:13): operation="profile_replace" pid=903 name=/usr/lib/connman/scripts/dhclient-script [ 15.908205] type=1505 audit(1262095086.633:14): operation="profile_replace" pid=904 name=/usr/bin/evince [ 15.919204] type=1505 audit(1262095086.643:15): operation="profile_replace" pid=904 name=/usr/bin/evince-previewer [ 15.927074] type=1505 audit(1262095086.649:16): operation="profile_replace" pid=904 name=/usr/bin/evince-thumbnailer [ 15.942239] type=1505 audit(1262095086.665:17): operation="profile_replace" pid=907 name=/usr/lib/cups/backend/cups-pdf [ 15.943368] type=1505 audit(1262095086.665:18): operation="profile_replace" pid=907 name=/usr/sbin/cupsd [ 15.951510] type=1505 audit(1262095086.673:19): operation="profile_replace" pid=908 name=/usr/sbin/tcpdump [ 15.980412] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 17.643551] ppdev: user-space parallel port driver [ 18.388910] CPU0 attaching NULL sched-domain. [ 18.388926] CPU1 attaching NULL sched-domain. [ 18.405326] CPU0 attaching sched-domain: [ 18.405344] domain 0: span 0-1 level SIBLING [ 18.405357] groups: 0 1 [ 18.405376] domain 1: span 0-1 level MC [ 18.405388] groups: 0-1 (__cpu_power = 2048) [ 18.405410] CPU1 attaching sched-domain: [ 18.405419] domain 0: span 0-1 level SIBLING [ 18.405430] groups: 1 0 [ 18.405447] domain 1: span 0-1 level MC [ 18.405457] groups: 0-1 (__cpu_power = 2048) [ 20.649728] CPU0 attaching NULL sched-domain. [ 20.649740] CPU1 attaching NULL sched-domain. [ 20.665130] CPU0 attaching sched-domain: [ 20.665139] domain 0: span 0-1 level SIBLING [ 20.665145] groups: 0 1 [ 20.665155] domain 1: span 0-1 level MC [ 20.665160] groups: 0-1 (__cpu_power = 2048) [ 20.665171] CPU1 attaching sched-domain: [ 20.665176] domain 0: span 0-1 level SIBLING [ 20.665182] groups: 1 0 [ 20.665190] domain 1: span 0-1 level MC [ 20.665195] groups: 0-1 (__cpu_power = 2048) [ 838.457289] CPU0 attaching NULL sched-domain. [ 838.457302] CPU1 attaching NULL sched-domain. [ 838.477302] CPU0 attaching sched-domain: [ 838.477318] domain 0: span 0-1 level SIBLING [ 838.477331] groups: 0 1 [ 838.477352] CPU1 attaching sched-domain: [ 838.477362] domain 0: span 0-1 level SIBLING [ 838.477373] groups: 1 0 [ 839.851084] PM: Syncing filesystems ... done. [ 839.854208] PM: Preparing system for mem sleep [ 839.854217] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 839.855700] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 839.855879] PM: Entering mem sleep [ 839.855902] Suspending console(s) (use no_console_suspend to debug) [ 839.916153] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 839.916520] sd 0:0:0:0: [sda] Stopping disk [ 840.848902] atl1c 0000:03:00.0: PME# disabled [ 840.848916] atl1c 0000:03:00.0: PCI INT A disabled [ 840.864247] ath5k 0000:01:00.0: PCI INT A disabled [ 840.928338] ata6: port disabled. ignoring. [ 840.928469] ata_piix 0000:00:1f.1: PCI INT A disabled [ 840.928500] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 840.928513] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 840.928524] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 840.928536] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 840.928547] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 841.032550] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 841.068460] i915 0000:00:02.0: PCI INT A disabled [ 841.084432] PM: suspend devices took 1.232 seconds [ 841.084713] ehci_hcd 0000:00:1d.7: PME# disabled [ 841.100467] ACPI: Preparing to enter system sleep state S3 [ 841.100872] Disabling non-boot CPUs ... [ 841.204033] CPU 1 is now offline [ 841.204039] SMP alternatives: switching to UP code [ 841.209354] CPU0 attaching NULL sched-domain. [ 841.209362] CPU1 attaching NULL sched-domain. [ 841.209375] CPU0 attaching NULL sched-domain. [ 841.209879] CPU1 is down [ 841.209898] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 841.209898] Back to C! [ 841.209898] CPU0: Thermal LVT vector (0xfa) already installed [ 841.209898] Enabling non-boot CPUs ... [ 841.209898] SMP alternatives: switching to SMP code [ 841.215480] Booting processor 1 APIC 0x1 ip 0x6000 [ 841.209133] Initializing CPU#1 [ 841.209133] Calibrating delay using timer specific routine.. 3192.00 BogoMIPS (lpj=6384001) [ 841.209133] CPU: L1 I cache: 32K, L1 D cache: 24K [ 841.209133] CPU: L2 cache: 512K [ 841.209133] CPU: Physical Processor ID: 0 [ 841.209133] CPU: Processor Core ID: 0 [ 841.209133] mce: CPU supports 5 MCE banks [ 841.209133] CPU1: Thermal monitoring enabled (TM2) [ 841.209133] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 841.305043] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 841.305156] CPU0 attaching NULL sched-domain. [ 841.309021] Switched to high resolution mode on CPU 1 [ 841.320037] CPU0 attaching sched-domain: [ 841.320045] domain 0: span 0-1 level SIBLING [ 841.320052] groups: 0 1 [ 841.320064] CPU1 attaching sched-domain: [ 841.320070] domain 0: span 0-1 level SIBLING [ 841.320077] groups: 1 0 [ 841.324043] CPU1 is up [ 841.324050] ACPI: Waking up from system sleep state S3 [ 841.327628] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x56340004) [ 841.327645] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 841.327716] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 841.327797] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030) [ 841.327818] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 841.327908] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 841.327985] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 841.328076] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 841.328122] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 841.328168] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 841.328224] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 841.328253] ehci_hcd 0000:00:1d.7: PME# disabled [ 841.328271] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 841.328290] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0x0, writing 0xffffffff) [ 841.328439] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0x56340000, writing 0x56344000) [ 841.328463] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 841.328602] ath5k 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 842.875442] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 842.875452] i915 0000:00:02.0: setting latency timer to 64 [ 842.936609] [drm] LVDS-8: set mode 1024x600 e [ 842.956668] pci 0000:00:02.1: PME# disabled [ 842.956683] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 842.956693] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 842.956735] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 842.956745] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 842.956775] usb usb2: root hub lost power or was reset [ 842.956826] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 842.956837] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 842.956866] usb usb3: root hub lost power or was reset [ 842.956891] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 842.956901] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 842.956929] usb usb4: root hub lost power or was reset [ 842.956955] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 842.956965] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 842.956993] usb usb5: root hub lost power or was reset [ 842.957026] ehci_hcd 0000:00:1d.7: PME# disabled [ 842.957037] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 842.957050] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 842.957098] pci 0000:00:1e.0: setting latency timer to 64 [ 842.957116] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 842.957124] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 842.957200] ata6: port disabled. ignoring. [ 842.957226] ahci 0000:00:1f.2: setting latency timer to 64 [ 842.957294] ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 842.957311] atl1c 0000:03:00.0: PME# disabled [ 842.957320] atl1c 0000:03:00.0: PME# disabled [ 843.276152] ata3: SATA link down (SStatus 0 SControl 300) [ 843.537408] sd 0:0:0:0: [sda] Starting disk [ 843.612139] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 843.614335] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 843.617283] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 843.617726] ata1.00: configured for UDMA/133 [ 843.808140] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 844.098527] PM: resume devices took 2.768 seconds [ 844.098583] PM: Finishing wakeup. [ 844.098588] Restarting tasks ... done. [ 844.099441] usb 2-1: USB disconnect, address 2 [ 844.234762] atl1c 0000:03:00.0: irq 28 for MSI/MSI-X [ 844.235477] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 844.276992] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 844.956595] CPU0 attaching NULL sched-domain. [ 844.956606] CPU1 attaching NULL sched-domain. [ 844.972206] CPU0 attaching sched-domain: [ 844.972222] domain 0: span 0-1 level SIBLING [ 844.972236] groups: 0 1 [ 844.972281] CPU1 attaching sched-domain: [ 844.972294] domain 0: span 0-1 level SIBLING [ 844.972308] groups: 1 0 [ 846.114994] CPU0 attaching NULL sched-domain. [ 846.115008] CPU1 attaching NULL sched-domain. [ 846.133210] CPU0 attaching sched-domain: [ 846.133222] domain 0: span 0-1 level SIBLING [ 846.133231] groups: 0 1 [ 846.133247] CPU1 attaching sched-domain: [ 846.133255] domain 0: span 0-1 level SIBLING [ 846.133262] groups: 1 0 [ 848.088154] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 848.248525] usb 3-2: configuration #1 chosen from 1 choice [ 848.250737] cdc_acm 3-2:1.0: ttyACM0: USB ACM device [ 934.262122] PPP BSD Compression module registered [ 934.272284] PPP Deflate Compression module registered