[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-38-generic (buildd@zirconium) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 (Ubuntu 2.6.32-38.83-generic 2.6.32.52+drm33.21) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe88c00 (usable) [ 0.000000] BIOS-e820: 000000007fe88c00 - 000000007fe8ac00 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fe8ac00 - 000000007fe8cc00 (ACPI data) [ 0.000000] BIOS-e820: 000000007fe8cc00 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x7fe88 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fe88c00 (usable) [ 0.000000] modified: 000000007fe88c00 - 000000007fe8ac00 (ACPI NVS) [ 0.000000] modified: 000000007fe8ac00 - 000000007fe8cc00 (ACPI data) [ 0.000000] modified: 000000007fe8cc00 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37850000 - 37fefdad [ 0.000000] Allocated new RAMDISK: 008e8000 - 01087dad [ 0.000000] Move RAMDISK from 0000000037850000 - 0000000037fefdac to 008e8000 - 01087dac [ 0.000000] ACPI: RSDP 000feb00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 000fd265 0005C (v01 DELL DM051 00000007 ASL 00000061) [ 0.000000] ACPI: FACP 000fd35d 000F4 (v03 DELL DM051 00000007 ASL 00000061) [ 0.000000] ACPI: DSDT fffc7664 02D49 (v01 DELL dt_ex 00001000 INTL 20050309) [ 0.000000] ACPI: FACS 7fe88c00 00040 [ 0.000000] ACPI: SSDT fffca4ce 000AC (v01 DELL st_ex 00001000 INTL 20050309) [ 0.000000] ACPI: APIC 000fd451 00072 (v01 DELL DM051 00000007 ASL 00000061) [ 0.000000] ACPI: BOOT 000fd4c3 00028 (v01 DELL DM051 00000007 ASL 00000061) [ 0.000000] ACPI: ASF! 000fd4eb 00067 (v16 DELL DM051 00000007 ASL 00000061) [ 0.000000] ACPI: MCFG 000fd552 0003E (v01 DELL DM051 00000007 ASL 00000061) [ 0.000000] ACPI: HPET 000fd590 00038 (v01 DELL DM051 00000007 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1158MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e3f18] TEXT DATA BSS ==> [0000100000 - 00008e3f18] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008e4000 - 00008e7198] BRK ==> [00008e4000 - 00008e7198] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e8000 - 0001087dad] NEW RAMDISK ==> [00008e8000 - 0001087dad] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fe88 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0007fe88 [ 0.000000] On node 0 totalpages: 523812 [ 0.000000] free_area_init_node: node 0, pgdat c079e9c0, node_mem_map c1089000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3964 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2318 pages used for memmap [ 0.000000] HighMem zone: 294268 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u1048576 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519718 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-38-generic root=UUID=afa11b53-37c1-4118-a635-32d3a26eea80 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10478240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fe88) [ 0.000000] Memory: 2050532k/2095648k available (4696k kernel code, 43620k reserved, 2123k data, 664k init, 1186344k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a9000 - 0xc084f000 ( 664 kB) [ 0.000000] .data : 0xc0596257 - 0xc07a8f88 (2123 kB) [ 0.000000] .text : 0xc0100000 - 0xc0596257 (4696 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2992.657 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.31 BogoMIPS (lpj=11970628) [ 0.004029] Security Framework initialized [ 0.004055] AppArmor: AppArmor initialized [ 0.004065] Mount-cache hash table entries: 512 [ 0.008166] Initializing cgroup subsys ns [ 0.008172] Initializing cgroup subsys cpuacct [ 0.008178] Initializing cgroup subsys memory [ 0.008187] Initializing cgroup subsys devices [ 0.008190] Initializing cgroup subsys freezer [ 0.008193] Initializing cgroup subsys net_cls [ 0.008225] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.008229] CPU: L2 cache: 2048K [ 0.008233] CPU: Physical Processor ID: 0 [ 0.008235] CPU: Processor Core ID: 0 [ 0.008239] mce: CPU supports 4 MCE banks [ 0.008253] CPU0: Thermal monitoring enabled (TM1) [ 0.008259] using mwait in idle threads. [ 0.008267] Performance Events: no PMU driver, software events only. [ 0.008276] Checking 'hlt' instruction... OK. [ 0.027982] ACPI: Core revision 20090903 [ 0.137468] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.137475] ftrace: allocating 21817 entries in 43 pages [ 0.140078] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.140406] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.181468] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 0.184001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 0 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.268061] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 0.268073] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.272031] Brought up 2 CPUs [ 0.272037] Total of 2 processors activated (11970.38 BogoMIPS). [ 0.273053] CPU0 attaching sched-domain: [ 0.273059] domain 0: span 0-1 level SIBLING [ 0.273064] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.273072] domain 1: span 0-1 level MC [ 0.273076] groups: 0-1 (cpu_power = 1178) [ 0.273084] CPU1 attaching sched-domain: [ 0.273086] domain 0: span 0-1 level SIBLING [ 0.273089] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.273097] domain 1: span 0-1 level MC [ 0.273100] groups: 0-1 (cpu_power = 1178) [ 0.273214] devtmpfs: initialized [ 0.273214] regulator: core version 0.5 [ 0.273214] Time: 8:21:19 Date: 01/26/12 [ 0.273214] NET: Registered protocol family 16 [ 0.273214] Trying to unpack rootfs image as initramfs... [ 0.273214] EISA bus registered [ 0.273214] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.273214] ACPI: bus type pci registered [ 0.273214] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.273214] PCI: MCFG area at f0000000 reserved in E820 [ 0.273214] PCI: Using MMCONFIG for extended config space [ 0.273214] PCI: Using configuration type 1 for base access [ 0.276657] bio: create slab at 0 [ 0.277634] ACPI: EC: Look up EC in DSDT [ 0.312288] ACPI: BIOS _OSI(Linux) query ignored [ 0.329752] ACPI: Interpreter enabled [ 0.329762] ACPI: (supports S0 S1 S3 S4 S5) [ 0.329810] ACPI: Using IOAPIC for interrupt routing [ 0.410870] ACPI: No dock devices found. [ 0.416103] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.416304] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.416311] pci 0000:00:01.0: PME# disabled [ 0.416406] pci 0000:00:1b.0: reg 10 64bit mmio: [0xefffc000-0xefffffff] [ 0.416467] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.416474] pci 0000:00:1b.0: PME# disabled [ 0.416566] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.416573] pci 0000:00:1c.0: PME# disabled [ 0.416647] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] [ 0.416722] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] [ 0.416792] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] [ 0.416862] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f] [ 0.416939] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff] [ 0.417008] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.417016] pci 0000:00:1d.7: PME# disabled [ 0.417193] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 0.417201] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007) [ 0.417261] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.417273] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.417283] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.417294] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.417304] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.417364] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] [ 0.417374] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] [ 0.417384] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] [ 0.417394] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] [ 0.417404] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf] [ 0.417414] pci 0000:00:1f.2: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.417445] pci 0000:00:1f.2: PME# supported from D3hot [ 0.417452] pci 0000:00:1f.2: PME# disabled [ 0.417514] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] [ 0.417596] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.417612] pci 0000:01:00.0: reg 18 64bit mmio: [0xefde0000-0xefdeffff] [ 0.417622] pci 0000:01:00.0: reg 20 io port: [0xdc00-0xdcff] [ 0.417637] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xefe00000-0xefe1ffff] [ 0.417670] pci 0000:01:00.0: supports D1 D2 [ 0.417726] pci 0000:01:00.1: reg 10 64bit mmio: [0xefdf0000-0xefdfffff] [ 0.417777] pci 0000:01:00.1: supports D1 D2 [ 0.417843] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.417850] pci 0000:00:01.0: bridge 32bit mmio: [0xefd00000-0xefefffff] [ 0.417859] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.417923] pci 0000:00:1c.0: bridge 32bit mmio: [0xefc00000-0xefcfffff] [ 0.418009] pci 0000:03:03.0: reg 20 io port: [0xcc80-0xcc9f] [ 0.418049] pci 0000:03:03.0: supports D1 D2 [ 0.418053] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.418061] pci 0000:03:03.0: PME# disabled [ 0.418133] pci 0000:03:03.1: reg 20 io port: [0xcca0-0xccbf] [ 0.418173] pci 0000:03:03.1: supports D1 D2 [ 0.418178] pci 0000:03:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.418186] pci 0000:03:03.1: PME# disabled [ 0.418238] pci 0000:03:03.2: reg 10 32bit mmio: [0xefbfef00-0xefbfefff] [ 0.418302] pci 0000:03:03.2: supports D1 D2 [ 0.418306] pci 0000:03:03.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.418314] pci 0000:03:03.2: PME# disabled [ 0.418377] pci 0000:03:08.0: reg 10 32bit mmio: [0xefbff000-0xefbfffff] [ 0.418389] pci 0000:03:08.0: reg 14 io port: [0xccc0-0xccff] [ 0.418445] pci 0000:03:08.0: supports D1 D2 [ 0.418450] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.418457] pci 0000:03:08.0: PME# disabled [ 0.418507] pci 0000:00:1e.0: transparent bridge [ 0.418515] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.418522] pci 0000:00:1e.0: bridge 32bit mmio: [0xefb00000-0xefbfffff] [ 0.418548] pci_bus 0000:00: on NUMA node 0 [ 0.418557] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.419218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 0.419650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.419973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 1.115329] Freeing initrd memory: 7807k freed [ 1.192730] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 1.193175] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 1.193574] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 1.193972] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 1.194410] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 1.194791] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 1.195202] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 1.195618] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15) [ 1.196071] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.196080] vgaarb: loaded [ 1.196252] SCSI subsystem initialized [ 1.196275] libata version 3.00 loaded. [ 1.196275] usbcore: registered new interface driver usbfs [ 1.196275] usbcore: registered new interface driver hub [ 1.196275] usbcore: registered new device driver usb [ 1.196275] ACPI: WMI: Mapper loaded [ 1.196275] PCI: Using ACPI for IRQ routing [ 1.196292] NetLabel: Initializing [ 1.196295] NetLabel: domain hash size = 128 [ 1.196298] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.196315] NetLabel: unlabeled traffic allowed by default [ 1.196368] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.196375] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.196382] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.200032] Switching to clocksource tsc [ 1.202708] AppArmor: AppArmor Filesystem Enabled [ 1.202723] pnp: PnP ACPI init [ 1.202737] ACPI: bus type pnp registered [ 1.237309] pnp: PnP ACPI: found 9 devices [ 1.237313] ACPI: ACPI bus type pnp unregistered [ 1.237318] PnPBIOS: Disabled by ACPI PNP [ 1.237335] system 00:01: ioport range 0x800-0x85f has been reserved [ 1.237340] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 1.237343] system 00:01: ioport range 0x860-0x8ff has been reserved [ 1.237356] system 00:07: iomem range 0x0-0x9ffff could not be reserved [ 1.237361] system 00:07: iomem range 0x100000-0xffffff could not be reserved [ 1.237365] system 00:07: iomem range 0x1000000-0x7fe88bff could not be reserved [ 1.237369] system 00:07: iomem range 0xf0000-0xfffff could not be reserved [ 1.237373] system 00:07: iomem range 0xc0000-0xcffff could not be reserved [ 1.237377] system 00:07: iomem range 0xfec00000-0xfecfffff could not be reserved [ 1.237381] system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved [ 1.237385] system 00:07: iomem range 0xfed20000-0xfed9ffff has been reserved [ 1.237389] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved [ 1.237392] system 00:07: iomem range 0xffc00000-0xffffffff has been reserved [ 1.237401] system 00:08: ioport range 0x100-0x1fe could not be reserved [ 1.237405] system 00:08: ioport range 0x200-0x277 has been reserved [ 1.237408] system 00:08: ioport range 0x280-0x2e7 has been reserved [ 1.237412] system 00:08: ioport range 0x2e8-0x2ef has been reserved [ 1.237415] system 00:08: ioport range 0x2f0-0x2f7 has been reserved [ 1.237419] system 00:08: ioport range 0x2f8-0x2ff has been reserved [ 1.237423] system 00:08: ioport range 0x300-0x377 could not be reserved [ 1.237426] system 00:08: ioport range 0x380-0x3bb has been reserved [ 1.237430] system 00:08: ioport range 0x3c0-0x3e7 could not be reserved [ 1.237434] system 00:08: ioport range 0x3f6-0x3f7 could not be reserved [ 1.237438] system 00:08: ioport range 0x400-0x4cf has been reserved [ 1.237441] system 00:08: ioport range 0x4d2-0x57f has been reserved [ 1.237445] system 00:08: ioport range 0x580-0x677 has been reserved [ 1.237448] system 00:08: ioport range 0x680-0x777 has been reserved [ 1.237452] system 00:08: ioport range 0x780-0x7bb has been reserved [ 1.237455] system 00:08: ioport range 0x7c0-0x7ff has been reserved [ 1.237459] system 00:08: ioport range 0x8e0-0x8ff has been reserved [ 1.237462] system 00:08: ioport range 0x900-0x9fe has been reserved [ 1.237466] system 00:08: ioport range 0xa00-0xafe has been reserved [ 1.237470] system 00:08: ioport range 0xb00-0xbfe has been reserved [ 1.237473] system 00:08: ioport range 0xc80-0xcaf has been reserved [ 1.237477] system 00:08: ioport range 0xcb0-0xcbf has been reserved [ 1.237480] system 00:08: ioport range 0xcc0-0xcf7 has been reserved [ 1.237484] system 00:08: ioport range 0xd00-0xdfe has been reserved [ 1.237488] system 00:08: ioport range 0xe00-0xefe has been reserved [ 1.237491] system 00:08: ioport range 0xf00-0xffe has been reserved [ 1.237495] system 00:08: ioport range 0x2000-0x20fe has been reserved [ 1.237499] system 00:08: ioport range 0x2100-0x21fe has been reserved [ 1.237502] system 00:08: ioport range 0x2200-0x22fe has been reserved [ 1.237506] system 00:08: ioport range 0x2300-0x23fe has been reserved [ 1.237510] system 00:08: ioport range 0x2400-0x24fe has been reserved [ 1.237513] system 00:08: ioport range 0x2500-0x25fe has been reserved [ 1.237517] system 00:08: ioport range 0x2600-0x26fe has been reserved [ 1.237521] system 00:08: ioport range 0x2700-0x27fe has been reserved [ 1.237524] system 00:08: ioport range 0x2800-0x28fe has been reserved [ 1.237528] system 00:08: ioport range 0x2900-0x29fe has been reserved [ 1.237532] system 00:08: ioport range 0x2a00-0x2afe has been reserved [ 1.237535] system 00:08: ioport range 0x2b00-0x2bfe has been reserved [ 1.237539] system 00:08: ioport range 0x2c00-0x2cfe has been reserved [ 1.237543] system 00:08: ioport range 0x2d00-0x2dfe has been reserved [ 1.237546] system 00:08: ioport range 0x2e00-0x2efe has been reserved [ 1.237550] system 00:08: ioport range 0x2f00-0x2ffe has been reserved [ 1.237554] system 00:08: ioport range 0x5000-0x50fe has been reserved [ 1.237558] system 00:08: ioport range 0x5100-0x51fe has been reserved [ 1.237561] system 00:08: ioport range 0x5200-0x52fe has been reserved [ 1.237565] system 00:08: ioport range 0x5300-0x53fe has been reserved [ 1.237569] system 00:08: ioport range 0x5400-0x54fe has been reserved [ 1.237573] system 00:08: ioport range 0x5500-0x55fe has been reserved [ 1.237577] system 00:08: ioport range 0x5600-0x56fe has been reserved [ 1.237581] system 00:08: ioport range 0x5700-0x57fe has been reserved [ 1.237584] system 00:08: ioport range 0x5800-0x58fe has been reserved [ 1.237588] system 00:08: ioport range 0x5900-0x59fe has been reserved [ 1.237592] system 00:08: ioport range 0x5a00-0x5afe has been reserved [ 1.237596] system 00:08: ioport range 0x5b00-0x5bfe has been reserved [ 1.237600] system 00:08: ioport range 0x5c00-0x5cfe has been reserved [ 1.237604] system 00:08: ioport range 0x5d00-0x5dfe has been reserved [ 1.237607] system 00:08: ioport range 0x5e00-0x5efe has been reserved [ 1.237611] system 00:08: ioport range 0x5f00-0x5ffe has been reserved [ 1.237615] system 00:08: ioport range 0x6000-0x60fe has been reserved [ 1.237619] system 00:08: ioport range 0x6100-0x61fe has been reserved [ 1.237623] system 00:08: ioport range 0x6200-0x62fe has been reserved [ 1.237627] system 00:08: ioport range 0x6300-0x63fe has been reserved [ 1.237631] system 00:08: ioport range 0x6400-0x64fe has been reserved [ 1.237635] system 00:08: ioport range 0x6500-0x65fe has been reserved [ 1.237638] system 00:08: ioport range 0x6600-0x66fe has been reserved [ 1.237642] system 00:08: ioport range 0x6700-0x67fe has been reserved [ 1.237646] system 00:08: ioport range 0x6800-0x68fe has been reserved [ 1.237650] system 00:08: ioport range 0x6900-0x69fe has been reserved [ 1.237654] system 00:08: ioport range 0x6a00-0x6afe has been reserved [ 1.237658] system 00:08: ioport range 0x6b00-0x6bfe has been reserved [ 1.237662] system 00:08: ioport range 0x6c00-0x6cfe has been reserved [ 1.237666] system 00:08: ioport range 0x6d00-0x6dfe has been reserved [ 1.237670] system 00:08: ioport range 0x6e00-0x6efe has been reserved [ 1.237674] system 00:08: ioport range 0x6f00-0x6ffe has been reserved [ 1.237678] system 00:08: ioport range 0xa000-0xa0fe has been reserved [ 1.237682] system 00:08: ioport range 0xa100-0xa1fe has been reserved [ 1.237687] system 00:08: ioport range 0xa200-0xa2fe has been reserved [ 1.237691] system 00:08: ioport range 0xa300-0xa3fe has been reserved [ 1.237697] system 00:08: ioport range 0xa400-0xa4fe has been reserved [ 1.237702] system 00:08: ioport range 0xa500-0xa5fe has been reserved [ 1.237707] system 00:08: ioport range 0xa600-0xa6fe has been reserved [ 1.237711] system 00:08: ioport range 0xa700-0xa7fe has been reserved [ 1.237716] system 00:08: ioport range 0xa800-0xa8fe has been reserved [ 1.237720] system 00:08: ioport range 0xa900-0xa9fe has been reserved [ 1.237724] system 00:08: ioport range 0xaa00-0xaafe has been reserved [ 1.237729] system 00:08: ioport range 0xab00-0xabfe has been reserved [ 1.237733] system 00:08: ioport range 0xac00-0xacfe has been reserved [ 1.237737] system 00:08: ioport range 0xad00-0xadfe has been reserved [ 1.237742] system 00:08: ioport range 0xae00-0xaefe has been reserved [ 1.237746] system 00:08: ioport range 0xaf00-0xaffe has been reserved [ 1.237751] system 00:08: iomem range 0xf0000000-0xf3ffffff has been reserved [ 1.237755] system 00:08: iomem range 0xfeda0000-0xfedacfff has been reserved [ 1.272563] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.272568] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 1.272573] pci 0000:00:01.0: MEM window: 0xefd00000-0xefefffff [ 1.272579] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff [ 1.272587] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.272591] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 1.272598] pci 0000:00:1c.0: MEM window: 0xefc00000-0xefcfffff [ 1.272604] pci 0000:00:1c.0: PREFETCH window: 0x00000080000000-0x000000801fffff [ 1.272614] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 1.272618] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 1.272625] pci 0000:00:1e.0: MEM window: 0xefb00000-0xefbfffff [ 1.272630] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.272646] alloc irq_desc for 16 on node -1 [ 1.272649] alloc kstat_irqs on node -1 [ 1.272656] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.272662] pci 0000:00:01.0: setting latency timer to 64 [ 1.272673] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.272679] pci 0000:00:1c.0: setting latency timer to 64 [ 1.272687] pci 0000:00:1e.0: setting latency timer to 64 [ 1.272693] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.272697] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 1.272700] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 1.272703] pci_bus 0000:01: resource 1 mem: [0xefd00000-0xefefffff] [ 1.272707] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] [ 1.272710] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 1.272713] pci_bus 0000:02: resource 1 mem: [0xefc00000-0xefcfffff] [ 1.272716] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff] [ 1.272720] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 1.272723] pci_bus 0000:03: resource 1 mem: [0xefb00000-0xefbfffff] [ 1.272726] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 1.272729] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 1.272776] NET: Registered protocol family 2 [ 1.272908] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.273352] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.273877] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.274129] TCP: Hash tables configured (established 131072 bind 65536) [ 1.274132] TCP reno registered [ 1.274233] NET: Registered protocol family 1 [ 1.274351] pci 0000:01:00.0: Boot video device [ 1.274410] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling [ 1.274443] Simple Boot Flag at 0x7a set to 0x1 [ 1.274641] cpufreq-nforce2: No nForce2 chipset. [ 1.274680] Scanning for low memory corruption every 60 seconds [ 1.274828] audit: initializing netlink socket (disabled) [ 1.274841] type=2000 audit(1327566080.272:1): initialized [ 1.284045] highmem bounce pool size: 64 pages [ 1.284052] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.286111] VFS: Disk quotas dquot_6.5.2 [ 1.286194] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.286998] fuse init (API version 7.13) [ 1.287122] msgmni has been set to 1705 [ 1.287442] alg: No test for stdrng (krng) [ 1.287526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.287531] io scheduler noop registered [ 1.287533] io scheduler anticipatory registered [ 1.287536] io scheduler deadline registered [ 1.287594] io scheduler cfq registered (default) [ 1.287775] alloc irq_desc for 24 on node -1 [ 1.287779] alloc kstat_irqs on node -1 [ 1.287790] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 1.287799] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.287936] alloc irq_desc for 25 on node -1 [ 1.287939] alloc kstat_irqs on node -1 [ 1.287949] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 1.287959] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.288095] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.288184] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.288297] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.288307] ACPI: Power Button [VBTN] [ 1.288385] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.288389] ACPI: Power Button [PWRF] [ 1.289089] processor LNXCPU:00: registered as cooling_device0 [ 1.289141] processor LNXCPU:01: registered as cooling_device1 [ 1.335598] isapnp: Scanning for PnP cards... [ 1.338122] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.340364] brd: module loaded [ 1.341262] loop: module loaded [ 1.341403] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.341535] ata_piix 0000:00:1f.1: version 2.13 [ 1.341552] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.341604] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.341703] scsi0 : ata_piix [ 1.341820] scsi1 : ata_piix [ 1.341881] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.341886] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.341915] alloc irq_desc for 20 on node -1 [ 1.341919] alloc kstat_irqs on node -1 [ 1.341927] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 1.341935] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.342200] ata2: port disabled. ignoring. [ 1.496025] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.496095] scsi2 : ata_piix [ 1.496195] scsi3 : ata_piix [ 1.496255] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20 [ 1.496261] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20 [ 1.496872] Fixed MDIO Bus: probed [ 1.496935] PPP generic driver version 2.4.2 [ 1.496994] tun: Universal TUN/TAP device driver, 1.6 [ 1.496999] tun: (C) 1999-2004 Max Krasnyansky [ 1.497140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.497166] alloc irq_desc for 21 on node -1 [ 1.497170] alloc kstat_irqs on node -1 [ 1.497178] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.497195] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.497200] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.497259] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.497293] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.497307] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.501187] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 1.501234] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800 [ 1.516017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.516168] usb usb1: configuration #1 chosen from 1 choice [ 1.516220] hub 1-0:1.0: USB hub found [ 1.516233] hub 1-0:1.0: 8 ports detected [ 1.516341] alloc irq_desc for 17 on node -1 [ 1.516345] alloc kstat_irqs on node -1 [ 1.516353] ehci_hcd 0000:03:03.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [ 1.516366] ehci_hcd 0000:03:03.2: EHCI Host Controller [ 1.516424] ehci_hcd 0000:03:03.2: new USB bus registered, assigned bus number 2 [ 1.516484] ehci_hcd 0000:03:03.2: irq 17, io mem 0xefbfef00 [ 1.528015] ehci_hcd 0000:03:03.2: USB 2.0 started, EHCI 1.00 [ 1.528140] usb usb2: configuration #1 chosen from 1 choice [ 1.528190] hub 2-0:1.0: USB hub found [ 1.528201] hub 2-0:1.0: 4 ports detected [ 1.528291] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.528317] uhci_hcd: USB Universal Host Controller Interface driver [ 1.528353] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.528363] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.528368] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.528422] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.528451] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 [ 1.528610] usb usb3: configuration #1 chosen from 1 choice [ 1.528657] hub 3-0:1.0: USB hub found [ 1.528672] hub 3-0:1.0: 2 ports detected [ 1.528746] alloc irq_desc for 22 on node -1 [ 1.528750] alloc kstat_irqs on node -1 [ 1.528757] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 1.528766] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.528771] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.528834] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 1.528871] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 [ 1.529028] usb usb4: configuration #1 chosen from 1 choice [ 1.529076] hub 4-0:1.0: USB hub found [ 1.529088] hub 4-0:1.0: 2 ports detected [ 1.529159] alloc irq_desc for 18 on node -1 [ 1.529163] alloc kstat_irqs on node -1 [ 1.529170] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.529179] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.529184] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.529237] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 1.529274] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 1.529424] usb usb5: configuration #1 chosen from 1 choice [ 1.529471] hub 5-0:1.0: USB hub found [ 1.529483] hub 5-0:1.0: 2 ports detected [ 1.529555] alloc irq_desc for 23 on node -1 [ 1.529559] alloc kstat_irqs on node -1 [ 1.529566] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.529575] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.529580] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.529634] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6 [ 1.529671] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 [ 1.529821] usb usb6: configuration #1 chosen from 1 choice [ 1.529869] hub 6-0:1.0: USB hub found [ 1.529881] hub 6-0:1.0: 2 ports detected [ 1.529965] alloc irq_desc for 19 on node -1 [ 1.529968] alloc kstat_irqs on node -1 [ 1.529975] uhci_hcd 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.529985] uhci_hcd 0000:03:03.0: UHCI Host Controller [ 1.530049] uhci_hcd 0000:03:03.0: new USB bus registered, assigned bus number 7 [ 1.530085] uhci_hcd 0000:03:03.0: irq 19, io base 0x0000cc80 [ 1.530236] usb usb7: configuration #1 chosen from 1 choice [ 1.530283] hub 7-0:1.0: USB hub found [ 1.530295] hub 7-0:1.0: 2 ports detected [ 1.530376] uhci_hcd 0000:03:03.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.530386] uhci_hcd 0000:03:03.1: UHCI Host Controller [ 1.530442] uhci_hcd 0000:03:03.1: new USB bus registered, assigned bus number 8 [ 1.530478] uhci_hcd 0000:03:03.1: irq 16, io base 0x0000cca0 [ 1.530627] usb usb8: configuration #1 chosen from 1 choice [ 1.530674] hub 8-0:1.0: USB hub found [ 1.530685] hub 8-0:1.0: 2 ports detected [ 1.530844] PNP: No PS/2 controller found. Probing ports directly. [ 1.533649] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.533660] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.533865] mice: PS/2 mouse device common for all mice [ 1.534062] rtc_cmos 00:05: RTC can wake from S4 [ 1.534121] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.534150] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 1.534331] device-mapper: uevent: version 1.0.3 [ 1.534483] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.534604] device-mapper: multipath: version 1.1.0 loaded [ 1.534609] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.534797] EISA: Probing bus 0 at eisa.0 [ 1.534802] EISA: Cannot allocate resource for mainboard [ 1.534806] Cannot allocate resource for EISA slot 1 [ 1.534810] Cannot allocate resource for EISA slot 2 [ 1.534822] Cannot allocate resource for EISA slot 5 [ 1.534826] Cannot allocate resource for EISA slot 6 [ 1.534839] EISA: Detected 0 cards. [ 1.534959] cpuidle: using governor ladder [ 1.534963] cpuidle: using governor menu [ 1.535704] TCP cubic registered [ 1.535945] NET: Registered protocol family 10 [ 1.537401] NET: Registered protocol family 17 [ 1.537467] Using IPI No-Shortcut mode [ 1.537588] PM: Resume from disk failed. [ 1.537617] registered taskstats version 1 [ 1.538037] Magic number: 12:591:372 [ 1.538110] rtc_cmos 00:05: setting system clock to 2012-01-26 08:21:20 UTC (1327566080) [ 1.538115] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.538118] EDD information not available. [ 1.684736] ata3.00: ATA-6: ST3160023AS, 8.12, max UDMA/133 [ 1.684743] ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 1.684933] ata3.01: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 [ 1.684938] ata3.01: 976773168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 1.688868] isapnp: No Plug & Play device found [ 1.692429] ata1.00: ATAPI: HL-DT-ST DVD+/-RW GWA4164B, E113, max UDMA/33 [ 1.692491] ata1.01: ATAPI: JLMS DVD-ROM LTD-166S, DS0C, max UDMA/44 [ 1.700464] ata3.00: configured for UDMA/133 [ 1.708341] ata1.00: configured for UDMA/33 [ 1.708687] ata3.01: configured for UDMA/133 [ 1.708824] ata1.01: configured for UDMA/44 [ 1.712432] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GWA4164B E113 PQ: 0 ANSI: 5 [ 1.717761] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.717766] Uniform CD-ROM driver Revision: 3.20 [ 1.717893] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.717961] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.718300] scsi 0:0:1:0: CD-ROM JLMS DVD-ROM LTD-166S DS0C PQ: 0 ANSI: 5 [ 1.719958] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.720082] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 1.720150] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.720326] scsi 2:0:0:0: Direct-Access ATA ST3160023AS 8.12 PQ: 0 ANSI: 5 [ 1.720499] sd 2:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB) [ 1.720543] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.720606] sd 2:0:0:0: [sda] Write Protect is off [ 1.720613] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.720683] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.720749] scsi 2:0:1:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.720962] sda: [ 1.720986] sd 2:0:1:0: Attached scsi generic sg3 type 0 [ 1.731070] sda1 sda2 < [ 1.731096] sd 2:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.747594] sda5 > [ 1.747677] sd 2:0:1:0: [sdb] Write Protect is off [ 1.747685] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.747740] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.748062] sdb: sdb1 [ 1.750481] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.750738] sd 2:0:1:0: [sdb] Attached SCSI disk [ 1.750766] Freeing unused kernel memory: 664k freed [ 1.751274] Write protecting the kernel text: 4700k [ 1.751329] Write protecting the kernel read-only data: 1844k [ 1.774991] udev: starting version 151 [ 1.912163] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 1.947194] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.947200] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.947259] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.949219] Floppy drive(s): fd0 is 1.44M [ 1.972128] e100 0000:03:08.0: PME# disabled [ 1.972643] FDC 0 is a post-1991 82077 [ 1.973815] e100: eth0: e100_probe: addr 0xefbff000, irq 20, MAC addr 00:12:3f:c5:9e:d2 [ 2.102637] usb 1-3: configuration #1 chosen from 1 choice [ 2.113505] Initializing USB Mass Storage driver... [ 2.113694] scsi4 : SCSI emulation for USB Mass Storage devices [ 2.113859] usbcore: registered new interface driver usb-storage [ 2.113865] USB Mass Storage support registered. [ 2.114068] usb-storage: device found at 3 [ 2.114072] usb-storage: waiting for device to settle before scanning [ 2.149204] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.149211] EXT4-fs (sda1): write access will be enabled during recovery [ 2.268076] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 2.534283] usb 1-6: configuration #1 chosen from 1 choice [ 2.772542] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 2.946578] usb 3-2: configuration #1 chosen from 1 choice [ 2.963336] usbcore: registered new interface driver hiddev [ 2.978758] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input3 [ 2.978906] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-2/input0 [ 2.978953] usbcore: registered new interface driver usbhid [ 2.978960] usbhid: v2.6:USB HID core driver [ 3.188076] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 3.363967] usb 4-2: configuration #1 chosen from 1 choice [ 3.380083] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/input/input4 [ 3.380266] generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2/input0 [ 5.891953] EXT4-fs (sda1): recovery complete [ 5.893951] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 7.118269] usb-storage: device scan complete [ 7.122532] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0 [ 7.126150] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.08 PQ: 0 ANSI: 0 [ 7.129650] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.08 PQ: 0 ANSI: 0 [ 7.133023] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.08 PQ: 0 ANSI: 0 [ 7.133686] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 7.133959] sd 4:0:0:1: Attached scsi generic sg5 type 0 [ 7.134206] sd 4:0:0:2: Attached scsi generic sg6 type 0 [ 7.134530] sd 4:0:0:3: Attached scsi generic sg7 type 0 [ 7.155128] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 7.159753] sd 4:0:0:1: [sdd] Attached SCSI removable disk [ 7.164501] sd 4:0:0:2: [sde] Attached SCSI removable disk [ 7.168375] sd 4:0:0:3: [sdf] Attached SCSI removable disk [ 21.774948] Adding 6032368k swap on /dev/sda5. Priority:-1 extents:1 across:6032368k [ 21.813493] udev: starting version 151 [ 22.390417] Linux agpgart interface v0.103 [ 22.391420] intel_rng: Firmware space is locked read-only. If you can't or [ 22.391424] intel_rng: don't want to disable this in firmware setup, and if [ 22.391427] intel_rng: you are certain that your system has a functional [ 22.391429] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 22.394281] lp: driver loaded but no devices found [ 22.455728] type=1505 audit(1327562501.413:2): operation="profile_load" pid=536 name="/sbin/dhclient3" [ 22.458576] type=1505 audit(1327562501.417:3): operation="profile_replace" pid=542 name="/sbin/dhclient3" [ 22.459452] type=1505 audit(1327562501.417:4): operation="profile_load" pid=542 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.459946] type=1505 audit(1327562501.417:5): operation="profile_load" pid=542 name="/usr/lib/connman/scripts/dhclient-script" [ 22.461512] type=1505 audit(1327562501.421:6): operation="profile_replace" pid=536 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.462305] type=1505 audit(1327562501.421:7): operation="profile_replace" pid=536 name="/usr/lib/connman/scripts/dhclient-script" [ 22.500322] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 22.547347] dell-wmi: No known WMI GUID found [ 22.695705] [drm] Initialized drm 1.1.0 20060810 [ 22.707961] type=1505 audit(1327562501.665:8): operation="profile_replace" pid=682 name="/sbin/dhclient3" [ 22.715191] type=1505 audit(1327562501.673:9): operation="profile_replace" pid=682 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.715674] type=1505 audit(1327562501.673:10): operation="profile_replace" pid=682 name="/usr/lib/connman/scripts/dhclient-script" [ 22.731098] Linux video capture interface: v2.00 [ 22.732526] type=1505 audit(1327562501.693:11): operation="profile_load" pid=681 name="/usr/share/gdm/guest-session/Xsession" [ 22.763283] uvcvideo: Found UVC 1.00 device (046d:0804) [ 22.765347] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.768156] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 22.776530] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.805011] input: UVC Camera (046d:0804) as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input5 [ 22.805126] usbcore: registered new interface driver uvcvideo [ 22.805133] USB Video Class driver (v0.1.0) [ 22.932458] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.116992] [drm] radeon defaulting to kernel modesetting. [ 23.116998] [drm] radeon kernel modesetting enabled. [ 23.117068] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 23.117078] radeon 0000:01:00.0: setting latency timer to 64 [ 23.119746] [drm] radeon: Initializing kernel modesetting. [ 23.124376] [drm] register mmio base: 0xEFDE0000 [ 23.124381] [drm] register mmio size: 65536 [ 23.124645] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 23.124669] [drm] Generation 2 PCI interface, using max accessible memory [ 23.124675] [drm] radeon: VRAM 128M [ 23.124679] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 23.124683] [drm] radeon: GTT 512M [ 23.124687] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [ 23.124762] alloc irq_desc for 26 on node -1 [ 23.124793] alloc kstat_irqs on node -1 [ 23.124811] radeon 0000:01:00.0: irq 26 for MSI/MSI-X [ 23.124821] radeon 0000:01:00.0: radeon: using MSI. [ 23.124855] [drm] radeon: irq initialized. [ 23.125594] [drm] Detected VRAM RAM=128M, BAR=128M [ 23.125601] [drm] RAM width 128bits DDR [ 23.125892] [TTM] Zone kernel: Available graphics memory: 436876 kiB. [ 23.125897] [TTM] Zone highmem: Available graphics memory: 1030048 kiB. [ 23.125926] [drm] radeon: 128M of VRAM memory ready [ 23.125931] [drm] radeon: 512M of GTT memory ready. [ 23.125956] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 23.126702] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 23.126757] [drm] PCIE GART of 512M enabled (table at 0x00040000). [ 23.126786] [drm] radeon: cp idle (0x10000C03) [ 23.126864] [drm] Loading R300 Microcode [ 23.126871] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 23.305747] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 23.306098] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 23.306105] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 23.306110] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 23.359744] [drm] radeon: ring at 0x0000000020000000 [ 23.359768] [drm] ring test succeeded in 0 usecs [ 23.360081] [drm] radeon: ib pool ready. [ 23.360226] [drm] ib test succeeded in 0 usecs [ 23.360408] [drm] Default TV standard: NTSC [ 23.360413] [drm] 27.000000000 MHz TV ref clk [ 23.360419] [drm] DFP table revision: 4 [ 23.360552] [drm] Default TV standard: NTSC [ 23.360556] [drm] 27.000000000 MHz TV ref clk [ 23.360615] [drm] Radeon Display Connectors [ 23.360620] [drm] Connector 0: [ 23.360624] [drm] VGA [ 23.360628] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 23.360632] [drm] Encoders: [ 23.360635] [drm] CRT1: INTERNAL_DAC1 [ 23.360639] [drm] Connector 1: [ 23.360642] [drm] DVI-I [ 23.360644] [drm] HPD1 [ 23.360649] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 23.360652] [drm] Encoders: [ 23.360656] [drm] CRT2: INTERNAL_DAC2 [ 23.360659] [drm] DFP1: INTERNAL_TMDS1 [ 23.360663] [drm] Connector 2: [ 23.360666] [drm] S-video [ 23.360668] [drm] Encoders: [ 23.360671] [drm] TV1: INTERNAL_DAC2 [ 23.512953] [drm] fb mappable at 0xE00C0000 [ 23.512959] [drm] vram apper at 0xE0000000 [ 23.512963] [drm] size 5242880 [ 23.512967] [drm] fb depth is 24 [ 23.512970] [drm] pitch is 5120 [ 23.513119] fb0: radeondrmfb frame buffer device [ 23.513123] registered panic notifier [ 23.513133] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 23.540745] vga16fb: initializing [ 23.540753] vga16fb: mapped to 0xc00a0000 [ 23.540760] vga16fb: not registering due to another framebuffer present [ 23.637767] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 23.888966] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 23.889058] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 23.911785] Console: switching to colour frame buffer device 160x64 [ 24.044774] usbcore: registered new interface driver snd-usb-audio [ 24.076521] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 24.077897] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 24.078310] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 24.080618] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 24.080975] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 24.081303] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 24.081625] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 24.127070] ppdev: user-space parallel port driver [ 24.875290] CPU0 attaching NULL sched-domain. [ 24.875300] CPU1 attaching NULL sched-domain. [ 24.900600] CPU0 attaching sched-domain: [ 24.900611] domain 0: span 0-1 level SIBLING [ 24.900615] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 24.900624] domain 1: span 0-1 level MC [ 24.900627] groups: 0-1 (cpu_power = 1178) [ 24.900635] CPU1 attaching sched-domain: [ 24.900638] domain 0: span 0-1 level SIBLING [ 24.900641] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 24.900649] domain 1: span 0-1 level MC [ 24.900652] groups: 0-1 (cpu_power = 1178) [ 27.630895] CPU0 attaching NULL sched-domain. [ 27.630905] CPU1 attaching NULL sched-domain. [ 27.652146] CPU0 attaching sched-domain: [ 27.652154] domain 0: span 0-1 level SIBLING [ 27.652160] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 27.652174] domain 1: span 0-1 level MC [ 27.652180] groups: 0-1 (cpu_power = 1178) [ 27.652193] CPU1 attaching sched-domain: [ 27.652197] domain 0: span 0-1 level SIBLING [ 27.652202] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 27.652213] domain 1: span 0-1 level MC [ 27.652218] groups: 0-1 (cpu_power = 1178) [ 33.676007] eth0: no IPv6 routers present