[ 0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10 [ 0.000000] Linux version 4.15.0-33-generic (buildd@lgw01-amd64-010) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #36~16.04.1-Ubuntu SMP Wed Aug 15 17:21:05 UTC 2018 (Ubuntu 4.15.0-33.36~16.04.1-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=5a62e724-e9df-43cf-95ca-7e83ebaef63a ro quiet splash acpi_backilght=vendor vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bc6bdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc6be000-0x00000000bcebdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bcebe000-0x00000000bcfbdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcfbe000-0x00000000bcffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.08 08/26/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 4 base 0BD800000 mask FFF800000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 13E000000 mask FFE000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x6ef3d000, 0x6ef3dfff] PGTABLE [ 0.000000] BRK [0x6ef3e000, 0x6ef3efff] PGTABLE [ 0.000000] BRK [0x6ef3f000, 0x6ef3ffff] PGTABLE [ 0.000000] BRK [0x6ef40000, 0x6ef40fff] PGTABLE [ 0.000000] BRK [0x6ef41000, 0x6ef41fff] PGTABLE [ 0.000000] BRK [0x6ef42000, 0x6ef42fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x314ae000-0x34a4efff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F2F60 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000BCFFE120 00007C (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP 0x00000000BCFFC000 0000F4 (v03 HPQOEM 161C 0000000F HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000BCFD2000 024780 (v02 HPQOEM 161C 00000001 INTL 20060912) [ 0.000000] ACPI: FACS 0x00000000BCFA6000 000040 [ 0.000000] ACPI: FACS 0x00000000BCFA6000 000040 [ 0.000000] ACPI: HPET 0x00000000BCFFB000 000038 (v01 HPQOEM 161C 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000BCFFA000 0000BC (v01 HPQOEM 161C 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000BCFF9000 00003C (v01 HPQOEM 161C 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000BCFF7000 000032 (v02 HPQOEM 161C 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BCFCF000 000266 (v01 HPQOEM SataAhci 00001000 INTL 20060912) [ 0.000000] ACPI: SSDT 0x00000000BCFCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912) [ 0.000000] ACPI: SLIC 0x00000000BCFCD000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BCFCC000 000810 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT 0x00000000BCFCB000 0009B1 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.000000] ACPI: ASF! 0x00000000BCFF8000 0000A5 (v32 HPQOEM 161C 00000001 HP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13dfd2000-0x13dffcfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013dffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bc6bdfff] [ 0.000000] node 0: [mem 0x00000000bcfff000-0x00000000bcffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013dffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013dffffff] [ 0.000000] On node 0 totalpages: 1025628 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 157 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11995 pages used for memmap [ 0.000000] DMA32 zone: 767679 pages, LIFO batch:31 [ 0.000000] Normal zone: 3968 pages used for memmap [ 0.000000] Normal zone: 253952 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 99 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000bda00000-0x00000000bf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc6be000-0xbcebdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcebe000-0xbcfbdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcfbe000-0xbcffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff] [ 0.000000] e820: [mem 0xbfa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1009444 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-33-generic root=UUID=5a62e724-e9df-43cf-95ca-7e83ebaef63a ro quiet splash acpi_backilght=vendor vt.handoff=7 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3885804K/4102512K available (12300K kernel code, 2469K rwdata, 4252K rodata, 2404K init, 2416K bss, 216708K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39127 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2593.909 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.81 BogoMIPS (lpj=10375636) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.028073] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028561] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.028588] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.028604] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.028827] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.028828] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.028832] mce: CPU supports 7 MCE banks [ 0.028840] CPU0: Thermal monitoring enabled (TM1) [ 0.028848] process: using mwait in idle threads [ 0.028851] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.028851] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.028853] Spectre V2 : Mitigation: Full generic retpoline [ 0.028854] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.028854] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.028856] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.028957] Freeing SMP alternatives memory: 36K [ 0.032077] TSC deadline timer enabled [ 0.032080] smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.032149] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.032173] ... version: 3 [ 0.032173] ... bit width: 48 [ 0.032174] ... generic registers: 4 [ 0.032174] ... value mask: 0000ffffffffffff [ 0.032175] ... max period: 00007fffffffffff [ 0.032176] ... fixed-purpose events: 3 [ 0.032176] ... event mask: 000000070000000f [ 0.032214] Hierarchical SRCU implementation. [ 0.033298] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.033314] smp: Bringing up secondary CPUs ... [ 0.033390] x86: Booting SMP configuration: [ 0.033391] .... node #0, CPUs: #1 #2 #3 [ 0.040059] smp: Brought up 1 node, 4 CPUs [ 0.040059] smpboot: Max logical packages: 2 [ 0.040059] smpboot: Total of 4 processors activated (20751.27 BogoMIPS) [ 0.042895] devtmpfs: initialized [ 0.042895] x86/mm: Memory block size: 128MB [ 0.042895] evm: security.selinux [ 0.042895] evm: security.SMACK64 [ 0.042895] evm: security.SMACK64EXEC [ 0.042895] evm: security.SMACK64TRANSMUTE [ 0.042895] evm: security.SMACK64MMAP [ 0.042895] evm: security.apparmor [ 0.042895] evm: security.ima [ 0.042895] evm: security.capability [ 0.042895] PM: Registering ACPI NVS region [mem 0xbcebe000-0xbcfbdfff] (1048576 bytes) [ 0.042895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.042895] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.042895] pinctrl core: initialized pinctrl subsystem [ 0.044003] RTC time: 10:53:52, date: 09/07/18 [ 0.044003] NET: Registered protocol family 16 [ 0.044003] audit: initializing netlink subsys (disabled) [ 0.044012] audit: type=2000 audit(1536317632.044:1): state=initialized audit_enabled=0 res=1 [ 0.044113] cpuidle: using governor ladder [ 0.044113] cpuidle: using governor menu [ 0.044113] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.044113] ACPI: bus type PCI registered [ 0.044113] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.044113] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.044115] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.044115] PCI: Using configuration type 1 for base access [ 0.044116] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.044166] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.044167] mtrr: probably your BIOS does not setup all CPUs. [ 0.044167] mtrr: corrected configuration. [ 0.045174] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.045174] ACPI: Added _OSI(Module Device) [ 0.045174] ACPI: Added _OSI(Processor Device) [ 0.045174] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.045174] ACPI: Added _OSI(Processor Aggregator Device) [ 0.045174] ACPI: Added _OSI(Linux-Dell-Video) [ 0.045174] ACPI: Executed 1 blocks of module-level executable AML code [ 0.056966] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.079314] ACPI: Dynamic OEM Table Load: [ 0.079321] ACPI: SSDT 0xFFFF8DAEB8761800 00069C (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.079878] ACPI: Dynamic OEM Table Load: [ 0.079883] ACPI: SSDT 0xFFFF8DAEB8000000 000303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.080287] ACPI: Dynamic OEM Table Load: [ 0.080291] ACPI: SSDT 0xFFFF8DAEB8768400 000119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.081547] ACPI: EC: EC started [ 0.081548] ACPI: EC: interrupt blocked [ 0.522167] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.522170] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.522171] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.522172] ACPI: Interpreter enabled [ 0.522195] ACPI: (supports S0 S3 S4 S5) [ 0.522196] ACPI: Using IOAPIC for interrupt routing [ 0.522223] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.522559] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.525520] ACPI: Power Resource [APPR] (off) [ 0.528401] ACPI: Power Resource [COMP] (off) [ 0.529209] ACPI: Power Resource [LPP] (on) [ 0.534320] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.534326] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.537096] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.537097] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.537828] PCI host bridge to bus 0000:00 [ 0.537830] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.537832] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.537833] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.537835] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff window] [ 0.537836] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window] [ 0.537837] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 0.537839] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.537847] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.537950] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.537961] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit] [ 0.537966] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.537970] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.538089] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.538115] pci 0000:00:16.0: reg 0x10: [mem 0xd4824000-0xd482400f 64bit] [ 0.538201] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.538284] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002 [ 0.538305] pci 0000:00:16.3: reg 0x10: [io 0x4090-0x4097] [ 0.538314] pci 0000:00:16.3: reg 0x14: [mem 0xd482b000-0xd482bfff] [ 0.538471] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.538492] pci 0000:00:19.0: reg 0x10: [mem 0xd4800000-0xd481ffff] [ 0.538500] pci 0000:00:19.0: reg 0x14: [mem 0xd482a000-0xd482afff] [ 0.538509] pci 0000:00:19.0: reg 0x18: [io 0x4060-0x407f] [ 0.538578] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.538662] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.538685] pci 0000:00:1a.0: reg 0x10: [mem 0xd4829000-0xd48293ff] [ 0.538777] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.538864] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.538886] pci 0000:00:1b.0: reg 0x10: [mem 0xd4820000-0xd4823fff 64bit] [ 0.538970] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.539061] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.539157] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.539246] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.539341] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.539430] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.539525] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.539615] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.539708] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.539802] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 0.539897] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.539986] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.540009] pci 0000:00:1d.0: reg 0x10: [mem 0xd4828000-0xd48283ff] [ 0.540101] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.540188] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 [ 0.540381] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.540400] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.540408] pci 0000:00:1f.2: reg 0x14: [io 0x409c-0x409f] [ 0.540416] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.540424] pci 0000:00:1f.2: reg 0x1c: [io 0x4098-0x409b] [ 0.540432] pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f] [ 0.540440] pci 0000:00:1f.2: reg 0x24: [mem 0xd4827000-0xd48277ff] [ 0.540489] pci 0000:00:1f.2: PME# supported from D3hot [ 0.540610] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.540617] pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff] [ 0.540742] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 0.540747] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 0.540750] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.540880] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010 [ 0.540930] pci 0000:23:00.0: reg 0x10: [mem 0xd4600000-0xd46007ff] [ 0.540953] pci 0000:23:00.0: reg 0x14: [mem 0xd4605000-0xd46050ff] [ 0.541262] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000 [ 0.541306] pci 0000:23:00.1: reg 0x10: [mem 0xd4604000-0xd46040ff] [ 0.541414] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref] [ 0.541605] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501 [ 0.541649] pci 0000:23:00.2: reg 0x10: [mem 0xd4603000-0xd46030ff] [ 0.552077] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 0.552091] pci 0000:00:1c.2: bridge window [mem 0xd4600000-0xd46fffff] [ 0.552332] pci 0000:24:00.0: [8086:0085] type 00 class 0x028000 [ 0.552536] pci 0000:24:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit] [ 0.553304] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold [ 0.564178] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 0.564184] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff] [ 0.564271] pci 0000:25:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.564315] pci 0000:25:00.0: reg 0x10: [mem 0xd4400000-0xd4401fff 64bit] [ 0.564553] pci 0000:25:00.0: PME# supported from D0 D3hot D3cold [ 0.576053] pci 0000:00:1c.7: PCI bridge to [bus 25] [ 0.576067] pci 0000:00:1c.7: bridge window [mem 0xd4400000-0xd44fffff] [ 0.577410] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.577489] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.577565] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.577641] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.577717] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.577792] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.577868] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.577943] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.578479] ACPI: EC: interrupt unblocked [ 0.578485] ACPI: EC: event unblocked [ 0.578492] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.578493] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.578713] SCSI subsystem initialized [ 0.578727] libata version 3.00 loaded. [ 0.578727] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.578727] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.578727] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.578727] vgaarb: loaded [ 0.578727] ACPI: bus type USB registered [ 0.578727] usbcore: registered new interface driver usbfs [ 0.578727] usbcore: registered new interface driver hub [ 0.578727] usbcore: registered new device driver usb [ 0.578727] EDAC MC: Ver: 3.0.0 [ 0.578727] PCI: Using ACPI for IRQ routing [ 0.582717] PCI: pci_cache_line_size set to 64 bytes [ 0.582832] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.582833] e820: reserve RAM buffer [mem 0xbc6be000-0xbfffffff] [ 0.582834] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff] [ 0.582835] e820: reserve RAM buffer [mem 0x13e000000-0x13fffffff] [ 0.582930] NetLabel: Initializing [ 0.582931] NetLabel: domain hash size = 128 [ 0.582931] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.582948] NetLabel: unlabeled traffic allowed by default [ 0.584442] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.584448] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.588002] clocksource: Switched to clocksource hpet [ 0.598217] VFS: Disk quotas dquot_6.6.0 [ 0.598238] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.598340] AppArmor: AppArmor Filesystem Enabled [ 0.598370] pnp: PnP ACPI init [ 0.598621] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.598623] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 0.598624] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.598626] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved [ 0.598628] system 00:00: [mem 0xbfa00000-0xbfa00fff] has been reserved [ 0.598629] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.598631] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.598633] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.598636] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.598637] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.598643] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.598815] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.598901] system 00:02: [io 0x0200-0x027f] has been reserved [ 0.598903] system 00:02: [io 0x1000-0x100f] has been reserved [ 0.598905] system 00:02: [io 0xffff] has been reserved [ 0.598907] system 00:02: [io 0xffff] has been reserved [ 0.598908] system 00:02: [io 0x0400-0x047f] has been reserved [ 0.598910] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.598911] system 00:02: [io 0xef80-0xef9f] has been reserved [ 0.598916] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.598942] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.599569] pnp 00:04: [dma 0 disabled] [ 0.599657] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.599682] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.599705] pnp 00:06: Plug and Play ACPI device, IDs SYN017b SYN0100 SYN0002 PNP0f13 (active) [ 0.600353] pnp: PnP ACPI: found 7 devices [ 0.606579] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.606584] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window [ 0.606605] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 add_align 100000 [ 0.606635] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 0.606637] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.606643] pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff] [ 0.606651] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 0.606654] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 0.606659] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.606663] pci 0000:00:1c.1: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 0.606671] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4608000-0xd460ffff pref] [ 0.606672] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 0.606677] pci 0000:00:1c.2: bridge window [mem 0xd4600000-0xd46fffff] [ 0.606685] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 0.606690] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff] [ 0.606698] pci 0000:00:1c.7: PCI bridge to [bus 25] [ 0.606703] pci 0000:00:1c.7: bridge window [mem 0xd4400000-0xd44fffff] [ 0.606712] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.606714] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.606715] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.606716] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff window] [ 0.606718] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window] [ 0.606719] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window] [ 0.606721] pci_bus 0000:01: resource 1 [mem 0xd4700000-0xd47fffff] [ 0.606722] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] [ 0.606724] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff] [ 0.606725] pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 0.606726] pci_bus 0000:23: resource 1 [mem 0xd4600000-0xd46fffff] [ 0.606728] pci_bus 0000:24: resource 1 [mem 0xd4500000-0xd45fffff] [ 0.606730] pci_bus 0000:25: resource 1 [mem 0xd4400000-0xd44fffff] [ 0.606846] NET: Registered protocol family 2 [ 0.607044] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.607111] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.607201] TCP: Hash tables configured (established 32768 bind 32768) [ 0.607235] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.607250] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.607299] NET: Registered protocol family 1 [ 0.607312] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.608536] PCI: CLS 64 bytes, default 64 [ 0.608575] Unpacking initramfs... [ 1.413312] Freeing initrd memory: 54916K [ 1.413335] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.413338] software IO TLB [mem 0xb86be000-0xbc6be000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 1.413589] Scanning for low memory corruption every 60 seconds [ 1.414242] Initialise system trusted keyrings [ 1.414251] Key type blacklist registered [ 1.414280] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.415349] zbud: loaded [ 1.415803] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.415927] fuse init (API version 7.26) [ 1.417389] Key type asymmetric registered [ 1.417391] Asymmetric key parser 'x509' registered [ 1.417422] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.417458] io scheduler noop registered [ 1.417459] io scheduler deadline registered [ 1.417499] io scheduler cfq registered (default) [ 1.418870] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 [ 1.418893] pcieport 0000:00:1c.1: Signaling PME with IRQ 25 [ 1.418914] pcieport 0000:00:1c.2: Signaling PME with IRQ 26 [ 1.418948] pcieport 0000:00:1c.3: Signaling PME with IRQ 27 [ 1.418970] pcieport 0000:00:1c.7: Signaling PME with IRQ 28 [ 1.418990] pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.419062] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.419063] vesafb: scrolling: redraw [ 1.419064] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.419076] vesafb: framebuffer at 0xc0000000, mapped to 0x (ptrval), using 3072k, total 3072k [ 1.419146] Console: switching to colour frame buffer device 128x48 [ 1.419161] fb0: VESA VGA frame buffer device [ 1.419174] intel_idle: MWAIT substates: 0x21120 [ 1.419175] intel_idle: v0.4.1 model 0x2A [ 1.419307] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.419706] ACPI: AC Adapter [AC] (off-line) [ 1.419766] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.419777] ACPI: Sleep Button [SLPB] [ 1.419808] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.419815] ACPI: Lid Switch [LID] [ 1.419845] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.419874] ACPI: Power Button [PWRF] [ 1.439530] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.444454] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.444456] ACPI: Thermal Zone [CPUZ] (43 C) [ 1.468256] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.468257] ACPI: Thermal Zone [GFXZ] (0 C) [ 1.483008] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.483010] ACPI: Thermal Zone [EXTZ] (25 C) [ 1.497892] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.497894] ACPI: Thermal Zone [LOCZ] (24 C) [ 1.512752] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.512754] ACPI: Thermal Zone [BATZ] (24 C) [ 1.513199] thermal LNXTHERM:05: registered as thermal_zone5 [ 1.513200] ACPI: Thermal Zone [PCHZ] (0 C) [ 1.513332] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.535692] 0000:00:16.3: ttyS4 at I/O 0x4090 (irq = 17, base_baud = 115200) is a 16550A [ 1.536059] Linux agpgart interface v0.103 [ 1.559571] ACPI: Battery Slot [BAT0] (battery present) [ 1.559673] ACPI: Battery Slot [BAT1] (battery absent) [ 1.562969] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 1.701837] loop: module loaded [ 1.702005] libphy: Fixed MDIO Bus: probed [ 1.702006] tun: Universal TUN/TAP device driver, 1.6 [ 1.702038] PPP generic driver version 2.4.2 [ 1.702078] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.702081] ehci-pci: EHCI PCI platform driver [ 1.702329] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.702336] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.702350] ehci-pci 0000:00:1a.0: debug port 2 [ 1.706244] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.706259] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4829000 [ 1.720018] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.720062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.720063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.720065] usb usb1: Product: EHCI Host Controller [ 1.720066] usb usb1: Manufacturer: Linux 4.15.0-33-generic ehci_hcd [ 1.720067] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.720206] hub 1-0:1.0: USB hub found [ 1.720212] hub 1-0:1.0: 3 ports detected [ 1.720561] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.720566] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.720576] ehci-pci 0000:00:1d.0: debug port 2 [ 1.724460] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.724464] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4828000 [ 1.740019] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.740052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.740053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.740055] usb usb2: Product: EHCI Host Controller [ 1.740056] usb usb2: Manufacturer: Linux 4.15.0-33-generic ehci_hcd [ 1.740057] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.740185] hub 2-0:1.0: USB hub found [ 1.740190] hub 2-0:1.0: 3 ports detected [ 1.740334] ehci-platform: EHCI generic platform driver [ 1.740345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.740347] ohci-pci: OHCI PCI platform driver [ 1.740354] ohci-platform: OHCI generic platform driver [ 1.740360] uhci_hcd: USB Universal Host Controller Interface driver [ 1.740470] xhci_hcd 0000:25:00.0: xHCI Host Controller [ 1.740476] xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 3 [ 1.740669] xhci_hcd 0000:25:00.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000004 [ 1.740954] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.740956] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.740957] usb usb3: Product: xHCI Host Controller [ 1.740959] usb usb3: Manufacturer: Linux 4.15.0-33-generic xhci-hcd [ 1.740960] usb usb3: SerialNumber: 0000:25:00.0 [ 1.741078] hub 3-0:1.0: USB hub found [ 1.741088] hub 3-0:1.0: 2 ports detected [ 1.741173] xhci_hcd 0000:25:00.0: xHCI Host Controller [ 1.741176] xhci_hcd 0000:25:00.0: new USB bus registered, assigned bus number 4 [ 1.741178] xhci_hcd 0000:25:00.0: Host supports USB 3.0 SuperSpeed [ 1.744078] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.744093] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.744095] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.744096] usb usb4: Product: xHCI Host Controller [ 1.744098] usb usb4: Manufacturer: Linux 4.15.0-33-generic xhci-hcd [ 1.744099] usb usb4: SerialNumber: 0000:25:00.0 [ 1.744266] hub 4-0:1.0: USB hub found [ 1.744278] hub 4-0:1.0: 2 ports detected [ 1.744408] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.746285] i8042: Detected active multiplexing controller, rev 1.1 [ 1.747040] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.747044] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.747068] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.747087] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.747105] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.747279] mousedev: PS/2 mouse device common for all mice [ 1.747599] rtc_cmos 00:03: RTC can wake from S4 [ 1.747729] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.747754] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.747760] i2c /dev entries driver [ 1.747806] device-mapper: uevent: version 1.0.3 [ 1.747872] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.747877] intel_pstate: Intel P-state driver initializing [ 1.748031] ledtrig-cpu: registered to indicate activity on CPUs [ 1.748340] NET: Registered protocol family 10 [ 1.751592] Segment Routing with IPv6 [ 1.751608] NET: Registered protocol family 17 [ 1.751645] Key type dns_resolver registered [ 1.751858] RAS: Correctable Errors collector initialized. [ 1.751887] microcode: sig=0x206a7, pf=0x10, revision=0x2e [ 1.751932] microcode: Microcode Update Driver: v2.2. [ 1.751940] sched_clock: Marking stable (1751927479, 0)->(1739784301, 12143178) [ 1.752144] registered taskstats version 1 [ 1.752151] Loading compiled-in X.509 certificates [ 1.754607] Loaded X.509 cert 'Build time autogenerated kernel key: d918b280ed158d77154089242222928ec1ab43e6' [ 1.754629] zswap: loaded using pool lzo/zbud [ 1.757456] Key type big_key registered [ 1.757459] Key type trusted registered [ 1.758808] Key type encrypted registered [ 1.758810] AppArmor: AppArmor sha1 policy hashing enabled [ 1.775048] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.056110] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.076140] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.104255] evm: HMAC attrs: 0x1 [ 2.104656] Magic number: 2:941:880 [ 2.104785] rtc_cmos 00:03: setting system clock to 2018-09-07 10:53:54 UTC (1536317634) [ 2.104923] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.104923] EDD information not available. [ 2.107021] Freeing unused kernel memory: 2404K [ 2.120051] Write protecting the kernel read-only data: 20480k [ 2.120496] Freeing unused kernel memory: 2008K [ 2.124114] Freeing unused kernel memory: 1892K [ 2.130339] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.130339] x86/mm: Checking user space page tables [ 2.136494] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.147114] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.147193] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.147204] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.199581] pps_core: LinuxPPS API ver. 1 registered [ 2.199583] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.201411] PTP clock support registered [ 2.207172] sdhci: Secure Digital Host Controller Interface driver [ 2.207173] sdhci: Copyright(c) Pierre Ossman [ 2.208103] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.208104] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.208478] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.210447] sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30) [ 2.210603] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 2.210732] mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA [ 2.210750] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30) [ 2.210824] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface. [ 2.220621] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.220624] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.221492] hub 1-1:1.0: USB hub found [ 2.221583] hub 1-1:1.0: 6 ports detected [ 2.240464] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.240467] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.240745] hub 2-1:1.0: USB hub found [ 2.240835] hub 2-1:1.0: 8 ports detected [ 2.284118] firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 2.300391] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.387609] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:1f:74:f3:75:78 [ 2.387611] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.387664] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 2.387706] ahci 0000:00:1f.2: version 3.0 [ 2.388101] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.388422] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 2.398290] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode [ 2.398301] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 2.428206] tsc: Refined TSC clocksource calibration: 2594.106 MHz [ 2.428236] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647bfab01, max_idle_ns: 440795211785 ns [ 2.444840] scsi host0: ahci [ 2.445024] scsi host1: ahci [ 2.445400] scsi host2: ahci [ 2.445540] scsi host3: ahci [ 2.445635] scsi host4: ahci [ 2.445732] scsi host5: ahci [ 2.445771] ata1: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827100 irq 35 [ 2.445773] ata2: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827180 irq 35 [ 2.445773] ata3: DUMMY [ 2.445776] ata4: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827280 irq 35 [ 2.445778] ata5: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827300 irq 35 [ 2.445780] ata6: SATA max UDMA/133 abar m2048@0xd4827000 port 0xd4827380 irq 35 [ 2.446432] [drm] Memory usable by graphics device = 2048M [ 2.446434] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 2.446443] fb: switching to inteldrmfb from VESA VGA [ 2.446472] Console: switching to colour dummy device 80x25 [ 2.446526] [drm] Replacing VGA console driver [ 2.452279] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.452280] [drm] Driver supports precise vblank timestamp query. [ 2.455156] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.497984] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 2.499557] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.503099] acpi device:0b: registered as cooling_device4 [ 2.503214] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9 [ 2.512170] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.532163] usb 2-1.2: new full-speed USB device number 3 using ehci-pci [ 2.567096] fbcon: inteldrmfb (fb0) is primary device [ 2.567153] Console: switching to colour frame buffer device 170x48 [ 2.567174] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.621962] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c [ 2.621970] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.621975] usb 1-1.1: SerialNumber: 0030b6e1a289 [ 2.645512] usb 2-1.2: New USB device found, idVendor=04ca, idProduct=009b [ 2.645519] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.645524] usb 2-1.2: Product: Wireless Device [ 2.645528] usb 2-1.2: Manufacturer: Lite-On Technology Corp. [ 2.649020] hidraw: raw HID events driver (C) Jiri Kosina [ 2.656046] usbcore: registered new interface driver usbhid [ 2.656047] usbhid: USB HID core driver [ 2.657442] input: Lite-On Technology Corp. Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:04CA:009B.0001/input/input10 [ 2.664263] random: fast init done [ 2.716362] hid-generic 0003:04CA:009B.0001: input,hidraw0: USB HID v1.11 Keyboard [Lite-On Technology Corp. Wireless Device] on usb-0000:00:1d.0-1.2/input0 [ 2.716601] input: Lite-On Technology Corp. Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:04CA:009B.0002/input/input11 [ 2.724110] usb 2-1.4: new high-speed USB device number 4 using ehci-pci [ 2.759516] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.766441] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.766625] ata1.00: ATA-8: ST2000LM003 HN-M201RAD, 2BE10001, max UDMA/133 [ 2.766626] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.773678] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.773807] ata1.00: configured for UDMA/133 [ 2.775181] scsi 0:0:0:0: Direct-Access ATA ST2000LM003 HN-M 0001 PQ: 0 ANSI: 5 [ 2.775577] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.775579] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.775589] sd 0:0:0:0: [sda] Write Protect is off [ 2.775591] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.775612] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.775621] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.776309] hid-generic 0003:04CA:009B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Lite-On Technology Corp. Wireless Device] on usb-0000:00:1d.0-1.2/input1 [ 2.812324] firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400 [ 2.832990] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.833833] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.881567] usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b230 [ 2.881574] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.881578] usb 2-1.4: Product: HP HD Webcam [Fixed] [ 2.881583] usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd. [ 2.881587] usb 2-1.4: SerialNumber: SN0001 [ 2.964181] usb 2-1.6: new full-speed USB device number 5 using ehci-pci [ 3.077333] usb 2-1.6: New USB device found, idVendor=03f0, idProduct=231d [ 3.077341] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.077346] usb 2-1.6: Product: HP Integrated Module [ 3.077350] usb 2-1.6: Manufacturer: Broadcom Corp [ 3.091883] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.097677] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.097689] ata2.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100 [ 3.099932] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.099948] ata2.00: configured for UDMA/100 [ 3.104001] scsi 1:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5 [ 3.170965] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.170970] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.171154] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.171226] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.442110] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8 [ 3.452310] clocksource: Switched to clocksource tsc [ 3.487466] ata4: SATA link down (SStatus 0 SControl 300) [ 3.804167] ata5: SATA link down (SStatus 0 SControl 300) [ 4.119488] ata6: SATA link down (SStatus 0 SControl 300) [ 4.266196] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916] [ 4.338571] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400/0x0, board id: 1623, fw id: 790122 [ 4.383287] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14 [ 4.996063] raid6: sse2x1 gen() 8432 MB/s [ 5.044058] raid6: sse2x1 xor() 6541 MB/s [ 5.092058] raid6: sse2x2 gen() 10628 MB/s [ 5.140058] raid6: sse2x2 xor() 7586 MB/s [ 5.188058] raid6: sse2x4 gen() 12203 MB/s [ 5.236055] raid6: sse2x4 xor() 9219 MB/s [ 5.236057] raid6: using algorithm sse2x4 gen() 12203 MB/s [ 5.236057] raid6: .... xor() 9219 MB/s, rmw enabled [ 5.236058] raid6: using ssse3x2 recovery algorithm [ 5.238961] xor: automatically using best checksumming function avx [ 5.255476] Btrfs loaded, crc32c=crc32c-intel [ 5.567077] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 6.517823] random: crng init done [ 6.517830] random: 7 urandom warning(s) missed due to ratelimiting [ 6.629041] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 6.648154] systemd[1]: Detected architecture x86-64. [ 6.648419] systemd[1]: Set hostname to . [ 8.021985] systemd[1]: Created slice System Slice. [ 8.022028] systemd[1]: Reached target User and Group Name Lookups. [ 8.022065] systemd[1]: Listening on LVM2 poll daemon socket. [ 8.022101] systemd[1]: Listening on Journal Socket. [ 8.022451] systemd[1]: Starting Nameserver information manager... [ 8.022890] systemd[1]: Mounting POSIX Message Queue File System... [ 8.022924] systemd[1]: Reached target Remote File Systems (Pre). [ 16.335005] systemd[1]: Started Create Static Device Nodes in /dev. [ 16.335841] systemd[1]: Starting udev Kernel Device Manager... [ 16.428313] systemd[1]: Started LVM2 metadata daemon. [ 16.463442] systemd[1]: Started Journal Service. [ 16.592912] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 16.610903] systemd-journald[352]: Received request to flush runtime journal from PID 1 [ 16.740393] lp: driver loaded but no devices found [ 17.011129] ppdev: user-space parallel port driver [ 17.043044] hp_accel: hardware type HPB64xx found [ 17.043748] lis3lv02d: 8 bits 3DC sensor found [ 17.087359] parport_pc 00:04: reported by Plug and Play ACPI [ 17.087435] parport0: PC-style at 0x378 (0x778), irq 5 [ 17.088128] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15 [ 17.088427] , using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 17.184264] lp0: using parport0 (interrupt-driven). [ 17.432070] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.451707] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247) [ 17.451713] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.451716] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 17.451719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.451720] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 17.451723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.451723] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 17.451726] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.451726] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 17.533262] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 17.535680] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 17.817489] hp_wmi: query 0xd returned error 0x5 [ 17.817566] input: HP WMI hotkeys as /devices/virtual/input/input16 [ 17.974870] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 17.974871] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 17.974872] RAPL PMU: hw unit of domain package 2^-16 Joules [ 17.974872] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 18.005540] audit: type=1400 audit(1536317650.395:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=667 comm="apparmor_parser" [ 18.005545] audit: type=1400 audit(1536317650.395:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=667 comm="apparmor_parser" [ 18.005548] audit: type=1400 audit(1536317650.395:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=667 comm="apparmor_parser" [ 18.005550] audit: type=1400 audit(1536317650.395:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=667 comm="apparmor_parser" [ 18.005741] audit: type=1400 audit(1536317650.395:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=666 comm="apparmor_parser" [ 18.005744] audit: type=1400 audit(1536317650.395:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=666 comm="apparmor_parser" [ 18.007366] audit: type=1400 audit(1536317650.395:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=671 comm="apparmor_parser" [ 18.008546] audit: type=1400 audit(1536317650.399:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=673 comm="apparmor_parser" [ 18.010180] audit: type=1400 audit(1536317650.399:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=672 comm="apparmor_parser" [ 18.010185] audit: type=1400 audit(1536317650.399:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=672 comm="apparmor_parser" [ 18.265244] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 18.430824] Intel(R) Wireless WiFi driver for Linux [ 18.430825] Copyright(c) 2003- 2015 Intel Corporation [ 18.431057] iwlwifi 0000:24:00.0: can't disable ASPM; OS doesn't have ASPM control [ 18.468378] iwlwifi 0000:24:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 18.549969] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 18.549970] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 18.549971] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 18.549973] iwlwifi 0000:24:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 18.568069] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 18.568072] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 18.568074] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 18.568076] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 18.568077] snd_hda_codec_idt hdaudioC0D0: inputs: [ 18.568080] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 18.568082] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 [ 18.568084] snd_hda_codec_idt hdaudioC0D0: Line=0xf [ 18.647243] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 18.707781] AVX version of gcm_enc/dec engaged. [ 18.707782] AES CTR mode by8 optimization enabled [ 18.772982] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 18.773025] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 18.773061] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 18.773098] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 18.773135] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 18.773170] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [ 18.773206] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [ 19.035660] iwlwifi 0000:24:00.0 wlo1: renamed from wlan0 [ 19.261359] media: Linux media interface: v0.10 [ 19.493815] kvm: disabled by bios [ 19.545252] kvm: disabled by bios [ 19.593154] kvm: disabled by bios [ 19.629181] kvm: disabled by bios [ 19.642985] Linux video capture interface: v2.00 [ 20.067009] Bluetooth: Core ver 2.22 [ 20.067029] NET: Registered protocol family 31 [ 20.067030] Bluetooth: HCI device and connection manager initialized [ 20.067033] Bluetooth: HCI socket layer initialized [ 20.067036] Bluetooth: L2CAP socket layer initialized [ 20.067040] Bluetooth: SCO socket layer initialized [ 20.070008] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b230) [ 20.141450] intel_rapl: Found RAPL domain package [ 20.141452] intel_rapl: Found RAPL domain core [ 20.141453] intel_rapl: Found RAPL domain uncore [ 20.141458] intel_rapl: RAPL package 0 domain package locked by BIOS [ 21.420104] Adding 4101116k swap on /dev/sda6. Priority:-2 extents:1 across:4101116k FS [ 21.730029] usbcore: registered new interface driver btusb [ 21.774073] uvcvideo 2-1.4:1.0: Entity type for entity Extension 5 was not initialized! [ 21.774076] uvcvideo 2-1.4:1.0: Entity type for entity Extension 4 was not initialized! [ 21.774077] uvcvideo 2-1.4:1.0: Entity type for entity Processing 3 was not initialized! [ 21.774079] uvcvideo 2-1.4:1.0: Entity type for entity Camera 1 was not initialized! [ 21.774140] input: HP HD Webcam [Fixed]: HP HD Web as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input24 [ 21.774205] usbcore: registered new interface driver uvcvideo [ 21.774205] USB Video Class driver (1.1.1) [ 22.543546] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.543547] Bluetooth: BNEP filters: protocol multicast [ 22.543552] Bluetooth: BNEP socket layer initialized [ 26.520968] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 26.527456] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 26.828341] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 26.917430] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 26.921214] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 27.144866] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 27.344087] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 33.359124] wlo1: authenticate with e0:0e:da:08:38:ad [ 33.362094] wlo1: send auth to e0:0e:da:08:38:ad (try 1/3) [ 33.419436] wlo1: authenticated [ 33.419624] wlo1: waiting for beacon from e0:0e:da:08:38:ad [ 33.524124] wlo1: associate with e0:0e:da:08:38:ad (try 1/3) [ 33.525193] wlo1: RX AssocResp from e0:0e:da:08:38:ad (capab=0x11 status=0 aid=1) [ 33.527951] wlo1: associated [ 33.627681] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:ad [ 33.835564] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 42.019774] Bluetooth: RFCOMM TTY layer initialized [ 42.019781] Bluetooth: RFCOMM socket layer initialized [ 42.019785] Bluetooth: RFCOMM ver 1.11 [ 64.746755] wlo1: disconnect from AP e0:0e:da:08:38:ad for new auth to e0:0e:da:08:38:a2 [ 64.748751] wlo1: authenticate with e0:0e:da:08:38:a2 [ 64.751277] wlo1: send auth to e0:0e:da:08:38:a2 (try 1/3) [ 64.752703] wlo1: authenticated [ 64.754294] wlo1: associate with e0:0e:da:08:38:a2 (try 1/3) [ 64.756478] wlo1: RX ReassocResp from e0:0e:da:08:38:a2 (capab=0x431 status=0 aid=1) [ 64.758639] wlo1: associated [ 64.924305] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:a2 [ 94.581458] wlo1: disconnect from AP e0:0e:da:08:38:a2 for new auth to e0:0e:da:08:38:ad [ 94.600319] wlo1: authenticate with e0:0e:da:08:38:ad [ 94.602768] wlo1: send auth to e0:0e:da:08:38:ad (try 1/3) [ 94.624394] wlo1: authenticated [ 94.632013] wlo1: associate with e0:0e:da:08:38:ad (try 1/3) [ 94.632987] wlo1: RX ReassocResp from e0:0e:da:08:38:ad (capab=0x11 status=0 aid=1) [ 94.635109] wlo1: associated [ 94.727952] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:ad [ 128.350098] wlo1: disconnect from AP e0:0e:da:08:38:ad for new auth to e0:0e:da:08:38:a2 [ 128.351815] wlo1: authenticate with e0:0e:da:08:38:a2 [ 128.354825] wlo1: send auth to e0:0e:da:08:38:a2 (try 1/3) [ 128.356433] wlo1: authenticated [ 128.359906] wlo1: associate with e0:0e:da:08:38:a2 (try 1/3) [ 128.362140] wlo1: RX ReassocResp from e0:0e:da:08:38:a2 (capab=0x431 status=0 aid=1) [ 128.364623] wlo1: associated [ 128.426921] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:a2 [ 240.913311] wlo1: disconnect from AP e0:0e:da:08:38:a2 for new auth to e0:0e:da:08:38:ad [ 240.944561] wlo1: authenticate with e0:0e:da:08:38:ad [ 240.947113] wlo1: send auth to e0:0e:da:08:38:ad (try 1/3) [ 240.952314] wlo1: authenticated [ 240.953334] wlo1: waiting for beacon from e0:0e:da:08:38:ad [ 241.055700] wlo1: associate with e0:0e:da:08:38:ad (try 1/3) [ 241.056756] wlo1: RX ReassocResp from e0:0e:da:08:38:ad (capab=0x11 status=0 aid=1) [ 241.059791] wlo1: associated [ 241.159937] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:ad [ 569.838454] wlo1: disconnect from AP e0:0e:da:08:38:ad for new auth to e0:0e:da:08:38:a2 [ 569.840546] wlo1: authenticate with e0:0e:da:08:38:a2 [ 569.843405] wlo1: send auth to e0:0e:da:08:38:a2 (try 1/3) [ 569.844795] wlo1: authenticated [ 569.845049] wlo1: waiting for beacon from e0:0e:da:08:38:a2 [ 569.918978] wlo1: associate with e0:0e:da:08:38:a2 (try 1/3) [ 569.921375] wlo1: RX ReassocResp from e0:0e:da:08:38:a2 (capab=0x431 status=0 aid=1) [ 569.924948] wlo1: associated [ 570.020343] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:a2 [ 651.165741] wlo1: disconnect from AP e0:0e:da:08:38:a2 for new auth to e0:0e:da:08:38:ad [ 651.183847] wlo1: authenticate with e0:0e:da:08:38:ad [ 651.186466] wlo1: send auth to e0:0e:da:08:38:ad (try 1/3) [ 651.187680] wlo1: authenticated [ 651.188072] wlo1: waiting for beacon from e0:0e:da:08:38:ad [ 651.213091] wlo1: associate with e0:0e:da:08:38:ad (try 1/3) [ 651.214208] wlo1: RX ReassocResp from e0:0e:da:08:38:ad (capab=0x11 status=0 aid=1) [ 651.217220] wlo1: associated [ 651.314660] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:ad [ 1094.788669] wlo1: disconnect from AP e0:0e:da:08:38:ad for new auth to e0:0e:da:08:38:a2 [ 1094.790380] wlo1: authenticate with e0:0e:da:08:38:a2 [ 1094.792960] wlo1: send auth to e0:0e:da:08:38:a2 (try 1/3) [ 1094.795240] wlo1: authenticated [ 1094.795375] wlo1: waiting for beacon from e0:0e:da:08:38:a2 [ 1094.856245] wlo1: associate with e0:0e:da:08:38:a2 (try 1/3) [ 1094.858616] wlo1: RX ReassocResp from e0:0e:da:08:38:a2 (capab=0x431 status=0 aid=1) [ 1094.862085] wlo1: associated [ 1094.982615] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:a2 [ 1128.272358] wlo1: disconnect from AP e0:0e:da:08:38:a2 for new auth to e0:0e:da:08:38:ad [ 1128.291080] wlo1: authenticate with e0:0e:da:08:38:ad [ 1128.294347] wlo1: send auth to e0:0e:da:08:38:ad (try 1/3) [ 1128.314771] wlo1: authenticated [ 1128.318485] wlo1: associate with e0:0e:da:08:38:ad (try 1/3) [ 1128.319463] wlo1: RX ReassocResp from e0:0e:da:08:38:ad (capab=0x11 status=0 aid=1) [ 1128.321683] wlo1: associated [ 1128.418315] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:ad [ 1191.495635] wlo1: disconnect from AP e0:0e:da:08:38:ad for new auth to e0:0e:da:08:38:a2 [ 1191.501187] wlo1: authenticate with e0:0e:da:08:38:a2 [ 1191.503697] wlo1: send auth to e0:0e:da:08:38:a2 (try 1/3) [ 1191.507568] wlo1: authenticated [ 1191.511461] wlo1: associate with e0:0e:da:08:38:a2 (try 1/3) [ 1191.513693] wlo1: RX ReassocResp from e0:0e:da:08:38:a2 (capab=0x431 status=0 aid=1) [ 1191.515925] wlo1: associated [ 1191.571913] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:a2 [ 1225.305673] wlo1: disconnect from AP e0:0e:da:08:38:a2 for new auth to e0:0e:da:08:38:ad [ 1225.325140] wlo1: authenticate with e0:0e:da:08:38:ad [ 1225.328012] wlo1: send auth to e0:0e:da:08:38:ad (try 1/3) [ 1225.343854] wlo1: authenticated [ 1225.346046] wlo1: associate with e0:0e:da:08:38:ad (try 1/3) [ 1225.347030] wlo1: RX ReassocResp from e0:0e:da:08:38:ad (capab=0x11 status=0 aid=1) [ 1225.349139] wlo1: associated [ 1225.447437] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:ad [ 1347.011268] wlo1: disconnect from AP e0:0e:da:08:38:ad for new auth to e0:0e:da:08:38:a2 [ 1347.013159] wlo1: authenticate with e0:0e:da:08:38:a2 [ 1347.015658] wlo1: send auth to e0:0e:da:08:38:a2 (try 1/3) [ 1347.017938] wlo1: authenticated [ 1347.021097] wlo1: associate with e0:0e:da:08:38:a2 (try 1/3) [ 1347.026861] wlo1: RX ReassocResp from e0:0e:da:08:38:a2 (capab=0x431 status=0 aid=4) [ 1347.029066] wlo1: associated [ 1347.090222] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:a2 [ 1380.718634] wlo1: disconnect from AP e0:0e:da:08:38:a2 for new auth to e0:0e:da:08:38:ad [ 1380.737091] wlo1: authenticate with e0:0e:da:08:38:ad [ 1380.739581] wlo1: send auth to e0:0e:da:08:38:ad (try 1/3) [ 1380.757479] wlo1: authenticated [ 1380.759737] wlo1: associate with e0:0e:da:08:38:ad (try 1/3) [ 1380.760695] wlo1: RX ReassocResp from e0:0e:da:08:38:ad (capab=0x11 status=0 aid=1) [ 1380.762979] wlo1: associated [ 1380.861019] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:ad [ 1620.763382] wlo1: disconnect from AP e0:0e:da:08:38:ad for new auth to e0:0e:da:08:38:a2 [ 1620.765861] wlo1: authenticate with e0:0e:da:08:38:a2 [ 1620.770068] wlo1: send auth to e0:0e:da:08:38:a2 (try 1/3) [ 1620.771847] wlo1: authenticated [ 1620.775485] wlo1: associate with e0:0e:da:08:38:a2 (try 1/3) [ 1620.777690] wlo1: RX ReassocResp from e0:0e:da:08:38:a2 (capab=0x431 status=0 aid=1) [ 1620.779950] wlo1: associated [ 1620.840201] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:a2 [ 1783.145030] wlo1: disconnect from AP e0:0e:da:08:38:a2 for new auth to e0:0e:da:08:38:ad [ 1783.163617] wlo1: authenticate with e0:0e:da:08:38:ad [ 1783.165985] wlo1: send auth to e0:0e:da:08:38:ad (try 1/3) [ 1783.182925] wlo1: authenticated [ 1783.183095] wlo1: waiting for beacon from e0:0e:da:08:38:ad [ 1783.290468] wlo1: associate with e0:0e:da:08:38:ad (try 1/3) [ 1783.291637] wlo1: RX ReassocResp from e0:0e:da:08:38:ad (capab=0x11 status=0 aid=1) [ 1783.294768] wlo1: associated [ 1783.391067] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:ad [ 2771.227399] ata1: exception Emask 0x40 SAct 0x0 SErr 0x40800 action 0x7 [ 2771.227411] ata1: SError: { HostInt CommWake } [ 2771.227421] ata1: hard resetting link [ 2771.543614] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2771.550346] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2771.557138] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2771.557274] ata1.00: configured for UDMA/133 [ 2771.558406] ata1: EH complete [ 2863.341439] wlo1: disconnect from AP e0:0e:da:08:38:ad for new auth to e0:0e:da:08:38:a2 [ 2863.359175] wlo1: authenticate with e0:0e:da:08:38:a2 [ 2863.362456] wlo1: send auth to e0:0e:da:08:38:a2 (try 1/3) [ 2863.368825] wlo1: authenticated [ 2863.369790] wlo1: associate with e0:0e:da:08:38:a2 (try 1/3) [ 2863.372602] wlo1: RX ReassocResp from e0:0e:da:08:38:a2 (capab=0x431 status=0 aid=3) [ 2863.391625] wlo1: associated [ 2863.421488] wlo1: Limiting TX power to 10 dBm as advertised by e0:0e:da:08:38:a2 [ 3518.305313] powercap intel-rapl:0: package locked by BIOS, monitoring only