sudo smartctl -a /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SPCC M.2 PCIe SSD Serial Number: 30044294457 Firmware Version: B00u7M10 PCI Vendor/Subsystem ID: 0x1e4b IEEE OUI Identifier: 0x000000 Total NVM Capacity: 2 048 408 248 320 [2,04 TB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 2 048 408 248 320 [2,04 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 202020 2020202020 Local Time is: Sat Jun 11 00:05:56 2022 MSK Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0006): Format Frmw_DL Optional NVM Commands (0x000f): Comp Wr_Unc DS_Mngmt Wr_Zero Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 256 Pages Warning Comp. Temp. Threshold: 120 Celsius Critical Comp. Temp. Threshold: 130 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.50W - - 0 0 0 0 0 0 1 + 5.80W - - 1 1 1 1 0 0 2 + 3.60W - - 2 2 2 2 0 0 3 - 0.0800W - - 3 3 3 3 5000 10000 4 - 0.0055W - - 4 4 4 4 5000 45000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 34 Celsius Available Spare: 100% Available Spare Threshold: 1% Percentage Used: 0% Data Units Read: 13 338 408 [6,82 TB] Data Units Written: 12 294 248 [6,29 TB] Host Read Commands: 91 144 630 Host Write Commands: 78 252 284 Controller Busy Time: 2 265 Power Cycles: 118 Power On Hours: 505 Unsafe Shutdowns: 22 Media and Data Integrity Errors: 0 Error Information Log Entries: 340 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 34 Celsius Temperature Sensor 2: 34 Celsius Temperature Sensor 3: 34 Celsius Temperature Sensor 4: 34 Celsius Temperature Sensor 5: 34 Celsius Temperature Sensor 6: 34 Celsius Temperature Sensor 7: 34 Celsius Temperature Sensor 8: 34 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged free(): invalid pointer Аварийный останов sudo smartctl -H /dev/nvme1n1 [sudo] пароль для vkovalen: smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED sudo smartctl -i /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SPCC M.2 PCIe SSD Serial Number: 30044294457 Firmware Version: B00u7M10 PCI Vendor/Subsystem ID: 0x1e4b IEEE OUI Identifier: 0x000000 Total NVM Capacity: 2 048 408 248 320 [2,04 TB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 2 048 408 248 320 [2,04 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 202020 2020202020 Local Time is: Sat Jun 11 00:08:28 2022 MSK sudo smartctl -c /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0006): Format Frmw_DL Optional NVM Commands (0x000f): Comp Wr_Unc DS_Mngmt Wr_Zero Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 256 Pages Warning Comp. Temp. Threshold: 120 Celsius Critical Comp. Temp. Threshold: 130 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.50W - - 0 0 0 0 0 0 1 + 5.80W - - 1 1 1 1 0 0 2 + 3.60W - - 2 2 2 2 0 0 3 - 0.0800W - - 3 3 3 3 5000 10000 4 - 0.0055W - - 4 4 4 4 5000 45000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 sudo smartctl -A /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF SMART DATA SECTION === SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 35 Celsius Available Spare: 100% Available Spare Threshold: 1% Percentage Used: 0% Data Units Read: 13 338 472 [6,82 TB] Data Units Written: 12 294 248 [6,29 TB] Host Read Commands: 91 145 879 Host Write Commands: 78 252 288 Controller Busy Time: 2 265 Power Cycles: 118 Power On Hours: 505 Unsafe Shutdowns: 22 Media and Data Integrity Errors: 0 Error Information Log Entries: 341 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 36 Celsius Temperature Sensor 2: 36 Celsius Temperature Sensor 3: 36 Celsius Temperature Sensor 4: 36 Celsius Temperature Sensor 5: 36 Celsius Temperature Sensor 6: 36 Celsius Temperature Sensor 7: 36 Celsius Temperature Sensor 8: 36 Celsius sudo smartctl -l error /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF SMART DATA SECTION === Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged free(): invalid pointer Аварийный останов if repeat: sudo smartctl -l error /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF SMART DATA SECTION === Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 1 0 0x1006 0x0004 0x000 0 0 - 1 2 0 0x1012 0x0004 0x000 0 0 - 2 3 0 0x1016 0x0004 0x000 0 0 - 3 4 0 0x101a 0x0004 0x000 0 0 - 4 5 0 0x0006 0x0004 0x000 0 0 - 5 6 0 0x0006 0x0004 0x000 0 0 - 6 7 0 0x1016 0x0004 0x000 0 0 - 7 8 0 0x1016 0x0004 0x000 0 0 - 8 9 0 0x101a 0x0004 0x000 0 0 - 9 10 0 0x100d 0x0004 0x000 0 0 - 10 11 0 0x1006 0x0004 0x000 0 0 - 11 12 0 0x0006 0x0004 0x000 0 0 - 12 13 0 0x100a 0x0004 0x000 0 0 - 13 14 0 0x0006 0x0004 0x000 0 0 - 14 15 0 0x0006 0x0004 0x000 0 0 - 15 16 0 0x1016 0x0004 0x000 0 0 - ... (48 entries not read) sudo smartctl -l error -j /dev/nvme1n1 [sudo] пароль для vkovalen: { "json_format_version": [ 1, 0 ], "smartctl": { "version": [ 7, 2 ], "svn_revision": "5155", "platform_info": "x86_64-linux-5.15.0-37-lowlatency", "build_info": "(local build)", "argv": [ "smartctl", "-l", "error", "-j", "/dev/nvme1n1" ], "exit_status": 0 }, "device": { "name": "/dev/nvme1n1", "info_name": "/dev/nvme1n1", "type": "nvme", "protocol": "NVMe" } } free(): invalid pointer Аварийный останов sudo smartctl -l error --json /dev/nvme1n1 [sudo] пароль для vkovalen: { "json_format_version": [ 1, 0 ], "smartctl": { "version": [ 7, 2 ], "svn_revision": "5155", "platform_info": "x86_64-linux-5.15.0-37-lowlatency", "build_info": "(local build)", "argv": [ "smartctl", "-l", "error", "--json", "/dev/nvme1n1" ], "exit_status": 0 }, "device": { "name": "/dev/nvme1n1", "info_name": "/dev/nvme1n1", "type": "nvme", "protocol": "NVMe" } } free(): invalid pointer Аварийный останов sudo smartctl -l error --json=cgiosuvy /dev/nvme1n1 [sudo] пароль для vkovalen: --- device: info_name: '/dev/nvme1n1' name: '/dev/nvme1n1' protocol: NVMe type: nvme json_format_version: - 1 - 0 smartctl: argv: - smartctl - '-l' - error - '--json=cgiosuvy' - '/dev/nvme1n1' build_info: '(local build)' exit_status: 0 output: - smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) - Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org - '' - '=== START OF SMART DATA SECTION ===' - Error Information (NVMe Log 0x01, 16 of 64 entries) - No Errors Logged - '' platform_info: x86_64-linux-5.15.0-37-lowlatency svn_revision: '5155' version: - 7 - 2 smartctl_0001_i: smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) smartctl_0002_i: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org smartctl_0004_u: '=== START OF SMART DATA SECTION ===' smartctl_0005_u: Error Information (NVMe Log 0x01, 16 of 64 entries) smartctl_0006_u: No Errors Logged free(): invalid pointer Аварийный останов Normal output sudo smartctl -x /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SPCC M.2 PCIe SSD Serial Number: 30044294457 Firmware Version: B00u7M10 PCI Vendor/Subsystem ID: 0x1e4b IEEE OUI Identifier: 0x000000 Total NVM Capacity: 2 048 408 248 320 [2,04 TB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 2 048 408 248 320 [2,04 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 202020 2020202020 Local Time is: Sat Jun 11 00:19:35 2022 MSK Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0006): Format Frmw_DL Optional NVM Commands (0x000f): Comp Wr_Unc DS_Mngmt Wr_Zero Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 256 Pages Warning Comp. Temp. Threshold: 120 Celsius Critical Comp. Temp. Threshold: 130 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.50W - - 0 0 0 0 0 0 1 + 5.80W - - 1 1 1 1 0 0 2 + 3.60W - - 2 2 2 2 0 0 3 - 0.0800W - - 3 3 3 3 5000 10000 4 - 0.0055W - - 4 4 4 4 5000 45000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 38 Celsius Available Spare: 100% Available Spare Threshold: 1% Percentage Used: 0% Data Units Read: 13 338 662 [6,82 TB] Data Units Written: 12 294 248 [6,29 TB] Host Read Commands: 91 149 579 Host Write Commands: 78 252 300 Controller Busy Time: 2 265 Power Cycles: 118 Power On Hours: 505 Unsafe Shutdowns: 22 Media and Data Integrity Errors: 0 Error Information Log Entries: 344 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 38 Celsius Temperature Sensor 2: 38 Celsius Temperature Sensor 3: 38 Celsius Temperature Sensor 4: 38 Celsius Temperature Sensor 5: 38 Celsius Temperature Sensor 6: 38 Celsius Temperature Sensor 7: 38 Celsius Temperature Sensor 8: 38 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 1 0 0x1006 0x0004 0x000 0 0 - 1 2 0 0x1012 0x0004 0x000 0 0 - 2 3 0 0x1016 0x0004 0x000 0 0 - 3 4 0 0x100d 0x0004 0x000 0 0 - 4 5 0 0x1002 0x0004 0x000 0 0 - 5 6 0 0x201c 0x0004 0x000 0 0 - 6 7 0 0x1016 0x0004 0x000 0 0 - 7 8 0 0x1016 0x0004 0x000 0 0 - 8 9 0 0x101a 0x0004 0x000 0 0 - 9 10 0 0x100d 0x0004 0x000 0 0 - 10 11 0 0x1006 0x0004 0x000 0 0 - 11 12 0 0x0006 0x0004 0x000 0 0 - 12 13 0 0x100a 0x0004 0x000 0 0 - 13 14 0 0x0006 0x0004 0x000 0 0 - 14 15 0 0x0006 0x0004 0x000 0 0 - 15 16 0 0x1016 0x0004 0x000 0 0 - ... (48 entries not read) sudo smartctl -A -H -i -c /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-37-lowlatency] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SPCC M.2 PCIe SSD Serial Number: 30044294457 Firmware Version: B00u7M10 PCI Vendor/Subsystem ID: 0x1e4b IEEE OUI Identifier: 0x000000 Total NVM Capacity: 2\u202f048\u202f408\u202f248\u202f320 [2,04 TB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 2\u202f048\u202f408\u202f248\u202f320 [2,04 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 202020 2020202020 Local Time is: Sat Jun 11 00:43:37 2022 MSK Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0006): Format Frmw_DL Optional NVM Commands (0x000f): Comp Wr_Unc DS_Mngmt Wr_Zero Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 256 Pages Warning Comp. Temp. Threshold: 120 Celsius Critical Comp. Temp. Threshold: 130 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.50W - - 0 0 0 0 0 0 1 + 5.80W - - 1 1 1 1 0 0 2 + 3.60W - - 2 2 2 2 0 0 3 - 0.0800W - - 3 3 3 3 5000 10000 4 - 0.0055W - - 4 4 4 4 5000 45000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 40 Celsius Available Spare: 100% Available Spare Threshold: 1% Percentage Used: 0% Data Units Read: 13\u202f338\u202f857 [6,82 TB] Data Units Written: 12\u202f294\u202f249 [6,29 TB] Host Read Commands: 91\u202f153\u202f306 Host Write Commands: 78\u202f252\u202f312 Controller Busy Time: 2\u202f265 Power Cycles: 118 Power On Hours: 506 Unsafe Shutdowns: 22 Media and Data Integrity Errors: 0 Error Information Log Entries: 347 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 40 Celsius Temperature Sensor 2: 40 Celsius Temperature Sensor 3: 40 Celsius Temperature Sensor 4: 40 Celsius Temperature Sensor 5: 40 Celsius Temperature Sensor 6: 40 Celsius Temperature Sensor 7: 40 Celsius Temperature Sensor 8: 40 Celsius