smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-38-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Micron 1100 SATA 256GB Serial Number: 18301DB34F37 LU WWN Device Id: 5 00a075 11db34f37 Firmware Version: M0DL022 User Capacity: 256,060,514,304 bytes [256 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: M.2 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Nov 11 12:51:21 2018 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 678) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 4) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 10 12 Power_Cycle_Count 0x0033 100 100 001 Pre-fail Always - 49 181 Program_Fail_Cnt_Total 0x0033 100 100 001 Pre-fail Always - 0 182 Erase_Fail_Count_Total 0x0033 100 100 001 Pre-fail Always - 0 177 Wear_Leveling_Count 0x0033 100 100 010 Pre-fail Always - 2 187 Reported_Uncorrect 0x0033 100 100 001 Pre-fail Always - 0 194 Temperature_Celsius 0x0022 068 037 000 Old_age Always - 32 (Min/Max 15/63) 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 238 Unknown_Attribute 0x0030 100 100 000 Old_age Offline - 0 175 Program_Fail_Count_Chip 0x0033 100 100 000 Pre-fail Always - 0 176 Erase_Fail_Count_Chip 0x0033 100 100 000 Pre-fail Always - 0 178 Used_Rsvd_Blk_Cnt_Chip 0x0033 100 100 000 Pre-fail Always - 0 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2048 195 Hardware_ECC_Recovered 0x002f 100 000 050 Pre-fail Always In_the_past 0 241 Total_LBAs_Written 0x0033 100 100 000 Pre-fail Always - 521648880 242 Total_LBAs_Read 0x0033 100 100 000 Pre-fail Always - 273255067 179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 000 Pre-fail Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Self-test routine in progress 90% 9 - # 2 Short offline Self-test routine in progress 90% 9 - # 3 Short offline Aborted by host 00% 5 - # 4 Short offline Completed without error 00% 4 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.