[   16.317813] usb 1-5: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[   17.805188] b44: eth0: Link is up at 100 Mbps, full duplex.
[   17.805192] b44: eth0: Flow control is off for TX and off for RX.
[   17.805503] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   90.391857] __ratelimit: 12 callbacks suppressed
[   90.391866] operapluginwrap[1686]: segfault at 0 ip (null) sp bfb58d3c error 4 in libXt.so.6.0.0[110000+4f000]
[   91.191707] operapluginwrap[1709]: segfault at 0 ip (null) sp bfb3c0dc error 4 in libdl-2.11.1.so[110000+2000]
[   91.379868] operapluginwrap[1721]: segfault at 0 ip (null) sp bff1d87c error 4 in libuuid.so.1.3.0[110000+3000]
[   91.657112] operapluginwrap[1744]: segfault at 0 ip (null) sp bf97fa5c error 4 in libpthread-2.11.1.so[110000+15000]
[  355.976717] CE: hpet increasing min_delta_ns to 15000 nsec
[  480.059496] usblp0: removed
[  895.204642] usb 1-5: USB disconnect, address 4
[  914.644126] usb 1-5: new high speed USB device using ehci_hcd and address 5
[  914.777400] usb 1-5: configuration #1 chosen from 1 choice
[  914.778710] usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2112
[  914.779108] scsi3 : SCSI emulation for USB Mass Storage devices
[  914.780898] usb-storage: device found at 5
[  914.780903] usb-storage: waiting for device to settle before scanning
[  915.995669] usb 1-5: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[  919.781344] usb-storage: device scan complete
[  920.024569] scsi 3:0:0:0: Direct-Access     HP       Officejet Pro L7 1.00 PQ: 0 ANSI: 2
[  920.025501] sd 3:0:0:0: Attached scsi generic sg2 type 0
[  920.743755] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[  954.154195] usblp0: removed
[ 1087.658756] usb 1-5: USB disconnect, address 5
[ 1106.956144] usb 1-5: new high speed USB device using ehci_hcd and address 6
[ 1107.089615] usb 1-5: configuration #1 chosen from 1 choice
[ 1107.090839] usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2112
[ 1107.092443] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1107.092665] usb-storage: device found at 6
[ 1107.092670] usb-storage: waiting for device to settle before scanning
[ 1108.303123] usb 1-5: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 1112.094623] usb-storage: device scan complete
[ 1112.095258] scsi 4:0:0:0: Direct-Access     HP       Officejet Pro L7 1.00 PQ: 0 ANSI: 2
[ 1112.096822] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1112.427112] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 1251.557586] usblp0: removed