[sanei_debug] Setting debug level of genesys to 255.
[genesys] SANE Genesys backend version 1.0 build 2511 from sane-backends 1.0.27
[genesys] SANE Genesys backend built with libusb-1.0
[genesys] sane_init: authorize != null
[genesys] sane_init: little endian machine
[genesys] probe_genesys_devices start
[genesys] attach: start: devp != NULL, may_wait = 0
[genesys] attach: trying to open device `libusb:001:034'
[genesys] attach: device `libusb:001:034' successfully opened
[genesys] attach: found Visioneer flatbed scanner Readwarrior at libusb:001:034
[genesys] attach completed
[genesys] probe_genesys_devices: 1 devices currently attached
[genesys] probe_genesys_devices completed
[genesys] sane_genesys_init completed
[genesys] sane_open: start (devicename = `')
[genesys] sane_open: empty devicename, trying `libusb:001:034'
[genesys] init_options start
[genesys] init_options completed
[genesys] sanei_genesys_init_fe start
[genesys] sanei_genesys_create_gamma_table: size = 256, maximum = 65535, gamma_max = 65535, gamma = 1
[genesys] sanei_genesys_create_gamma_table: completed
[genesys] sanei_genesys_create_gamma_table: size = 256, maximum = 65535, gamma_max = 65535, gamma = 1
[genesys] sanei_genesys_create_gamma_table: completed
[genesys] sanei_genesys_create_gamma_table: size = 256, maximum = 65535, gamma_max = 65535, gamma = 1
[genesys] sanei_genesys_create_gamma_table: completed
[genesys] sanei_genesys_exposure_time2: ydpi=900, step=1, endpixel=44 led=4432, power=0 => exposure=9166
[genesys] calibration_filename: calibration filename >/home/andrew/.sane/visioneer-roadwarrior.cal<
[genesys] sane_genesys_open: Calibration filename set to:
[genesys] sane_genesys_open: >/home/andrew/.sane/visioneer-roadwarrior.cal<
[genesys] sanei_genesys_read_calibration start
[genesys] sanei_genesys_read_calibration: reading one record
[genesys] sanei_genesys_read_calibration completed
[genesys] sane_genesys_open completed
[genesys] sane_get_option_descriptor: option =  (0)
[genesys] sane_control_option: start: action = get, option =  (0)
[genesys] sane_control_option: exit
[genesys] sane_get_option_descriptor: option =  (0)
[genesys] sane_control_option: start: action = get, option =  (0)
[genesys] sane_control_option: exit
[genesys] sane_get_option_descriptor: option = (null) (1)
[genesys] sane_get_option_descriptor: option = mode (2)
[genesys] sane_get_option_descriptor: option = source (3)
[genesys] sane_get_option_descriptor: option = preview (4)
[genesys] sane_get_option_descriptor: option = depth (5)
[genesys] sane_get_option_descriptor: option = resolution (6)
[genesys] sane_get_option_descriptor: option = (null) (7)
[genesys] sane_get_option_descriptor: option = tl-x (8)
[genesys] sane_get_option_descriptor: option = tl-y (9)
[genesys] sane_get_option_descriptor: option = br-x (10)
[genesys] sane_get_option_descriptor: option = br-y (11)
[genesys] sane_get_option_descriptor: option = (null) (12)
[genesys] sane_get_option_descriptor: option = custom-gamma (13)
[genesys] sane_get_option_descriptor: option = gamma-table (14)
[genesys] sane_get_option_descriptor: option = red-gamma-table (15)
[genesys] sane_get_option_descriptor: option = green-gamma-table (16)
[genesys] sane_get_option_descriptor: option = blue-gamma-table (17)
[genesys] sane_get_option_descriptor: option = swdeskew (18)
[genesys] sane_get_option_descriptor: option = swcrop (19)
[genesys] sane_get_option_descriptor: option = swdespeck (20)
[genesys] sane_get_option_descriptor: option = despeck (21)
[genesys] sane_get_option_descriptor: option = swskip (22)
[genesys] sane_get_option_descriptor: option = swderotate (23)
[genesys] sane_get_option_descriptor: option = brightness (24)
[genesys] sane_get_option_descriptor: option = contrast (25)
[genesys] sane_get_option_descriptor: option = (null) (26)
[genesys] sane_get_option_descriptor: option = lamp-off-time (27)
[genesys] sane_get_option_descriptor: option = lamp-off-scan (28)
[genesys] sane_get_option_descriptor: option = threshold (29)
[genesys] sane_get_option_descriptor: option = threshold-curve (30)
[genesys] sane_get_option_descriptor: option = disable-dynamic-lineart (31)
[genesys] sane_get_option_descriptor: option = disable-interpolation (32)
[genesys] sane_get_option_descriptor: option = color-filter (33)
[genesys] sane_get_option_descriptor: option = calibration-file (34)
[genesys] sane_get_option_descriptor: option = expiration-time (35)
[genesys] sane_get_option_descriptor: option = (null) (36)
[genesys] sane_get_option_descriptor: option = scan (37)
[genesys] sane_get_option_descriptor: option = file (38)
[genesys] sane_get_option_descriptor: option = email (39)
[genesys] sane_get_option_descriptor: option = copy (40)
[genesys] sane_get_option_descriptor: option = page-loaded (41)
[genesys] sane_get_option_descriptor: option = ocr (42)
[genesys] sane_get_option_descriptor: option = power (43)
[genesys] sane_get_option_descriptor: option = extra (44)
[genesys] sane_get_option_descriptor: option = need-calibration (45)
[genesys] sane_get_option_descriptor: option = (null) (46)
[genesys] sane_get_option_descriptor: option = calibrate (47)
[genesys] sane_get_option_descriptor: option = clear-calibration (48)
[genesys] sane_control_option: start: action = get, option = br-x (10)
[genesys] sane_control_option: exit
[genesys] sane_control_option: start: action = get, option = tl-x (8)
[genesys] sane_control_option: exit
[genesys] sane_control_option: start: action = get, option = br-y (11)
[genesys] sane_control_option: exit
[genesys] sane_control_option: start: action = get, option = tl-y (9)
[genesys] sane_control_option: exit
[genesys] sane_get_option_descriptor: option = calibrate (47)
[genesys] sane_get_option_descriptor: option = calibrate (47)
[genesys] sane_control_option: start: action = set, option = calibrate (47)
[genesys] genesys_sheetfed_calibration start
[genesys] genesys_sheetfed_calibration
[genesys] sanei_genesys_exposure_time2: ydpi=75, step=0, endpixel=5228 led=4432, power=0 => exposure=26000
[genesys] sanei_genesys_exposure_time2: ydpi=187, step=0, endpixel=0 led=4432, power=0 => exposure=10427
[genesys] sanei_genesys_create_slope_table3: step_type = 0, exposure_time = 26000, yres = 75, power_mode = 0
[genesys] sanei_genesys_generate_slope_table: table size: 256
[genesys] sanei_genesys_generate_slope_table: stop at time: 2600, use 256 steps max
[genesys] sanei_genesys_generate_slope_table: target slope: vstart: 3000, vend: 2600, steps: 10, g: 0.8
[genesys] sanei_genesys_generate_slope_table: returns sum=30400, used 11 steps, completed
[genesys] sanei_genesys_create_slope_table: returns sum_time=30400, completed
[genesys] sanei_genesys_create_slope_table3: step_type = 0, exposure_time = 0, yres = 75, power_mode = 0
[genesys] sanei_genesys_generate_slope_table: table size: 256
[genesys] sanei_genesys_generate_slope_table: stop at time: 0, use 256 steps max
[genesys] sanei_genesys_generate_slope_table: target slope: vstart: 3000, vend: 2600, steps: 10, g: 0.8
[genesys] Can not reach target speed(0) in 256 steps.
[genesys] Expect image to be distorted. Ignore this if only feeding.
[genesys] sanei_genesys_generate_slope_table: returns sum=30400, used 11 steps, completed
[genesys] sanei_genesys_create_slope_table: returns sum_time=30400, completed
[genesys] sanei_genesys_create_slope_table3: step_type = 0, exposure_time = 10427, yres = 187, power_mode = 0
[genesys] sanei_genesys_generate_slope_table: table size: 256
[genesys] sanei_genesys_generate_slope_table: stop at time: 2599, use 0 steps max
[genesys] sanei_genesys_generate_slope_table: target slope: vstart: 3000, vend: 2600, steps: 10, g: 0.8
[genesys] Can not reach target speed(2599) in 1 steps.
[genesys] Expect image to be distorted. Ignore this if only feeding.
[genesys] sanei_genesys_generate_slope_table: returns sum=3000, used 1 steps, completed
[genesys] sanei_genesys_create_slope_table: returns sum_time=3000, completed
[genesys] sanei_genesys_exposure_time2: ydpi=225, step=0, endpixel=5228 led=4432, power=0 => exposure=8666
[genesys] sanei_genesys_exposure_time2: ydpi=225, step=0, endpixel=5228 led=80, power=0 => exposure=8666
[genesys] sanei_genesys_exposure_time2: ydpi=225, step=0, endpixel=5228 led=80, power=0 => exposure=8666
[genesys] sanei_genesys_exposure_time2: ydpi=75, step=0, endpixel=5228 led=80, power=0 => exposure=26000
[genesys] sanei_genesys_exposure_time2: ydpi=187, step=0, endpixel=0 led=80, power=0 => exposure=10427
[genesys] sanei_genesys_create_slope_table3: step_type = 0, exposure_time = 26000, yres = 75, power_mode = 0
[genesys] sanei_genesys_generate_slope_table: table size: 256
[genesys] sanei_genesys_generate_slope_table: stop at time: 2600, use 256 steps max
[genesys] sanei_genesys_generate_slope_table: target slope: vstart: 3000, vend: 2600, steps: 10, g: 0.8
[genesys] sanei_genesys_generate_slope_table: returns sum=30400, used 11 steps, completed
[genesys] sanei_genesys_create_slope_table: returns sum_time=30400, completed
[genesys] sanei_genesys_create_slope_table3: step_type = 0, exposure_time = 0, yres = 75, power_mode = 0
[genesys] sanei_genesys_generate_slope_table: table size: 256
[genesys] sanei_genesys_generate_slope_table: stop at time: 0, use 256 steps max
[genesys] sanei_genesys_generate_slope_table: target slope: vstart: 3000, vend: 2600, steps: 10, g: 0.8
[genesys] Can not reach target speed(0) in 256 steps.
[genesys] Expect image to be distorted. Ignore this if only feeding.
[genesys] sanei_genesys_generate_slope_table: returns sum=30400, used 11 steps, completed
[genesys] sanei_genesys_create_slope_table: returns sum_time=30400, completed
[genesys] sanei_genesys_create_slope_table3: step_type = 0, exposure_time = 10427, yres = 187, power_mode = 0
[genesys] sanei_genesys_generate_slope_table: table size: 256
[genesys] sanei_genesys_generate_slope_table: stop at time: 2599, use 0 steps max
[genesys] sanei_genesys_generate_slope_table: target slope: vstart: 3000, vend: 2600, steps: 10, g: 0.8
[genesys] Can not reach target speed(2599) in 1 steps.
[genesys] Expect image to be distorted. Ignore this if only feeding.
[genesys] sanei_genesys_generate_slope_table: returns sum=3000, used 1 steps, completed
[genesys] sanei_genesys_create_slope_table: returns sum_time=3000, completed
[genesys] genesys_sheetfed_calibration: failed to find black strip: Operation not supported
[genesys] sanei_genesys_exposure_time2: ydpi=187, step=0, endpixel=0 led=80, power=0 => exposure=10427
[genesys] sanei_genesys_create_slope_table3: step_type = 0, exposure_time = 10427, yres = 187, power_mode = 0
[genesys] sanei_genesys_generate_slope_table: table size: 256
[genesys] sanei_genesys_generate_slope_table: stop at time: 2599, use 256 steps max
[genesys] sanei_genesys_generate_slope_table: target slope: vstart: 3000, vend: 2600, steps: 10, g: 0.8
[genesys] Can not reach target speed(2599) in 256 steps.
[genesys] Expect image to be distorted. Ignore this if only feeding.
[genesys] sanei_genesys_generate_slope_table: returns sum=30400, used 11 steps, completed
[genesys] sanei_genesys_create_slope_table: returns sum_time=30400, completed
[genesys] sane_control_option: exit
scanimage: setting of option --calibrate failed (Operation not supported)
[genesys] sane_genesys_close start
[genesys] sanei_genesys_exposure_time2: ydpi=187, step=0, endpixel=0 led=80, power=0 => exposure=10427
[genesys] sanei_genesys_create_slope_table3: step_type = 0, exposure_time = 10427, yres = 187, power_mode = 0
[genesys] sanei_genesys_generate_slope_table: table size: 256
[genesys] sanei_genesys_generate_slope_table: stop at time: 2599, use 256 steps max
[genesys] sanei_genesys_generate_slope_table: target slope: vstart: 3000, vend: 2600, steps: 10, g: 0.8
[genesys] Can not reach target speed(2599) in 256 steps.
[genesys] Expect image to be distorted. Ignore this if only feeding.
[genesys] sanei_genesys_generate_slope_table: returns sum=30400, used 11 steps, completed
[genesys] sanei_genesys_create_slope_table: returns sum_time=30400, completed
[genesys] write_calibration start
[genesys] write_calibration completed
[genesys] sane_genesys_close completed
[genesys] sane_genesys_exit start
[genesys] sane_genesys_exit completed