[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-25-generic (buildd@komainu) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #33-Ubuntu SMP Tue Nov 4 12:06:54 UTC 2014 (Ubuntu 3.16.0-25.33-generic 3.16.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic root=UUID=56bb6343-1cf4-4464-b900-d7b08524f85f ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df9befff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df9bf000-0x00000000dfabefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dfabf000-0x00000000dfbbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000186ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000187000000-0x000000019effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP 655 Notebook PC/1885, BIOS F.04 06/27/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x187000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DFBBC000 mask FFFFFF000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000019f000000 aka 6640M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdfc00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x186e00000-0x186ffffff] [ 0.000000] [mem 0x186e00000-0x186ffffff] page 2M [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x184000000-0x186dfffff] [ 0.000000] [mem 0x184000000-0x186dfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x180000000-0x183ffffff] [ 0.000000] [mem 0x180000000-0x183ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdf9befff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xdf7fffff] page 2M [ 0.000000] [mem 0xdf800000-0xdf9befff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdfbff000-0xdfbfffff] [ 0.000000] [mem 0xdfbff000-0xdfbfffff] page 4k [ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff] [ 0.000000] [mem 0x100000000-0x17fffffff] page 1G [ 0.000000] RAMDISK: [mem 0x35902000-0x36c78fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000DFBFE120 00007C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000DFBFC000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: DSDT 0x00000000DFBE9000 00E214 (v01 HPQOEM 1885 F0000000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x00000000DFB8A000 000040 [ 0.000000] ACPI: UEFI 0x00000000DFBFD000 000236 (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: HPET 0x00000000DFBFB000 000038 (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: APIC 0x00000000DFBFA000 000084 (v03 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: MCFG 0x00000000DFBF9000 00003C (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: ASF! 0x00000000DFBF8000 0000A5 (v32 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: BOOT 0x00000000DFBE8000 000028 (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: SLIC 0x00000000DFBE7000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: FPDT 0x00000000DFBE5000 000044 (v01 HPQOEM 1885 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBE4000 0003DE (v01 HPQOEM 1885 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DFBE2000 0016CF (v02 HPQOEM 1885 00000001 MSFT 04000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000186ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x186ffffff] [ 0.000000] NODE_DATA [mem 0x186ff9000-0x186ffdfff] [ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff880180c00000-ffff8801865fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x186ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdf9befff] [ 0.000000] node 0: [mem 0xdfbff000-0xdfbfffff] [ 0.000000] node 0: [mem 0x100000000-0x186ffffff] [ 0.000000] On node 0 totalpages: 1468766 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14247 pages used for memmap [ 0.000000] DMA32 zone: 911808 pages, LIFO batch:31 [ 0.000000] Normal zone: 8640 pages used for memmap [ 0.000000] Normal zone: 552960 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf9bf000-0xdfabefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfabf000-0xdfbbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfbbf000-0xdfbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfc00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880186c00000 s87360 r8192 d23232 u524288 [ 0.000000] pcpu-alloc: s87360 r8192 d23232 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1445794 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic root=UUID=56bb6343-1cf4-4464-b900-d7b08524f85f ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 5679864K/5875064K available (7732K kernel code, 1200K rwdata, 3608K rodata, 1360K init, 1308K bss, 195200K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 23592960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1697.087 MHz processor [ 0.000059] Calibrating delay loop (skipped), value calculated using timer frequency.. 3394.17 BogoMIPS (lpj=6788348) [ 0.000065] pid_max: default: 32768 minimum: 301 [ 0.000084] ACPI: Core revision 20140424 [ 0.021964] ACPI: All ACPI Tables successfully acquired [ 0.027268] Security Framework initialized [ 0.027305] AppArmor: AppArmor initialized [ 0.027308] Yama: becoming mindful. [ 0.028430] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.034271] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.036984] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.037007] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.037625] Initializing cgroup subsys memory [ 0.037681] Initializing cgroup subsys devices [ 0.037695] Initializing cgroup subsys freezer [ 0.037702] Initializing cgroup subsys net_cls [ 0.037713] Initializing cgroup subsys blkio [ 0.037722] Initializing cgroup subsys perf_event [ 0.037728] Initializing cgroup subsys net_prio [ 0.037743] Initializing cgroup subsys hugetlb [ 0.037791] tseg: 00dfc00000 [ 0.037797] CPU: Physical Processor ID: 0 [ 0.037799] CPU: Processor Core ID: 0 [ 0.037803] mce: CPU supports 6 MCE banks [ 0.037821] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 tlb_flushall_shift: 6 [ 0.038078] Freeing SMP alternatives memory: 32K (ffffffff81e82000 - ffffffff81e8a000) [ 0.040602] ftrace: allocating 29293 entries in 115 pages [ 0.067755] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.107427] smpboot: CPU0: AMD E2-1800 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00) [ 0.213873] Performance Events: AMD PMU driver. [ 0.213883] ... version: 0 [ 0.213886] ... bit width: 48 [ 0.213888] ... generic registers: 4 [ 0.213890] ... value mask: 0000ffffffffffff [ 0.213892] ... max period: 00007fffffffffff [ 0.213894] ... fixed-purpose events: 0 [ 0.213897] ... event mask: 000000000000000f [ 0.217623] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.217868] x86: Booting SMP configuration: [ 0.217874] .... node #0, CPUs: #1 [ 0.230938] x86: Booted up 1 node, 2 CPUs [ 0.230943] smpboot: Total of 2 processors activated (6788.34 BogoMIPS) [ 0.231746] devtmpfs: initialized [ 0.240250] evm: security.selinux [ 0.240254] evm: security.SMACK64 [ 0.240257] evm: security.SMACK64EXEC [ 0.240259] evm: security.SMACK64TRANSMUTE [ 0.240261] evm: security.SMACK64MMAP [ 0.240263] evm: security.ima [ 0.240265] evm: security.capability [ 0.240508] PM: Registering ACPI NVS region [mem 0xdfabf000-0xdfbbefff] (1048576 bytes) [ 0.242775] pinctrl core: initialized pinctrl subsystem [ 0.243038] regulator-dummy: no parameters [ 0.243155] RTC time: 7:49:24, date: 11/06/14 [ 0.243281] NET: Registered protocol family 16 [ 0.243637] cpuidle: using governor ladder [ 0.243642] cpuidle: using governor menu [ 0.243907] ACPI: bus type PCI registered [ 0.243913] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.244119] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.244124] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.244346] PCI: Using configuration type 1 for base access [ 0.244744] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.244746] mtrr: probably your BIOS does not setup all CPUs. [ 0.244748] mtrr: corrected configuration. [ 0.251892] ACPI: Added _OSI(Module Device) [ 0.251900] ACPI: Added _OSI(Processor Device) [ 0.251904] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.251906] ACPI: Added _OSI(Processor Aggregator Device) [ 0.257075] ACPI: Executed 1 blocks of module-level executable AML code [ 0.263141] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.281317] ACPI: Interpreter enabled [ 0.281346] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.281356] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.281392] ACPI: (supports S0 S3 S4 S5) [ 0.281396] ACPI: Using IOAPIC for interrupt routing [ 0.281762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.282855] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.295736] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.295753] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.296193] acpi PNP0A08:00: _OSC: platform does not support [PME PCIeCapability] [ 0.296415] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.296421] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.296426] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug AER] [ 0.296430] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.296714] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff]) [ 0.296723] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.297122] PCI host bridge to bus 0000:00 [ 0.297130] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.297135] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.297139] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.297143] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.297147] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.297150] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.297154] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.297158] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.297161] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.297165] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.297169] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.297172] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.297176] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.297180] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.297183] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.297187] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff] [ 0.297191] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff] [ 0.297194] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff] [ 0.297210] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 [ 0.297387] pci 0000:00:01.0: [1002:9808] type 00 class 0x030000 [ 0.297406] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] [ 0.297417] pci 0000:00:01.0: reg 0x14: [io 0x3000-0x30ff] [ 0.297427] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff] [ 0.297491] pci 0000:00:01.0: supports D1 D2 [ 0.297632] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 [ 0.297647] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff] [ 0.297721] pci 0000:00:01.1: supports D1 D2 [ 0.297882] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601 [ 0.297908] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f] [ 0.297921] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127] [ 0.297934] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117] [ 0.297946] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123] [ 0.297959] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f] [ 0.297972] pci 0000:00:11.0: reg 0x24: [mem 0xf034c000-0xf034c7ff] [ 0.298192] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.298211] pci 0000:00:12.0: reg 0x10: [mem 0xf034b000-0xf034bfff] [ 0.298351] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.298505] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.298722] pci 0000:00:12.2: reg 0x10: [mem 0xf034a000-0xf034a0ff] [ 0.299701] pci 0000:00:12.2: supports D1 D2 [ 0.299705] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.299789] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.299916] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.300164] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.300193] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit] [ 0.300273] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.300457] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.300695] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 [ 0.300806] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.300893] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400 [ 0.300992] pci 0000:00:15.0: supports D1 D2 [ 0.301073] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.301191] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400 [ 0.301288] pci 0000:00:15.1: supports D1 D2 [ 0.301369] pci 0000:00:15.1: System wakeup disabled by ACPI [ 0.301523] pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400 [ 0.301620] pci 0000:00:15.3: supports D1 D2 [ 0.301700] pci 0000:00:15.3: System wakeup disabled by ACPI [ 0.301783] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310 [ 0.301802] pci 0000:00:16.0: reg 0x10: [mem 0xf0349000-0xf0349fff] [ 0.301936] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.302054] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320 [ 0.302246] pci 0000:00:16.2: reg 0x10: [mem 0xf0348000-0xf03480ff] [ 0.303180] pci 0000:00:16.2: supports D1 D2 [ 0.303184] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.303263] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.303389] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 [ 0.303547] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 [ 0.303700] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 [ 0.303854] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 [ 0.304021] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 [ 0.304173] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 [ 0.304325] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 [ 0.304477] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 [ 0.304814] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) [ 0.304828] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.304832] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.304840] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.304844] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.304848] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.304852] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.304856] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.304860] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.304864] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.304868] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.304872] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.304876] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.304880] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.304883] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.304887] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.304891] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode) [ 0.304895] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode) [ 0.305079] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000 [ 0.305108] pci 0000:02:00.0: reg 0x10: [mem 0xf0200000-0xf0200fff] [ 0.305268] pci 0000:02:00.0: supports D1 D2 [ 0.305272] pci 0000:02:00.0: PME# supported from D1 D2 D3hot [ 0.311216] pci 0000:00:15.0: PCI bridge to [bus 02] [ 0.311237] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf02fffff] [ 0.311486] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.311518] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.311556] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] [ 0.311581] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.311699] pci 0000:03:00.0: supports D1 D2 [ 0.311703] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.312637] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.319209] pci 0000:00:15.1: PCI bridge to [bus 03] [ 0.319227] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] [ 0.319240] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.319473] pci 0000:04:00.0: [168c:0032] type 00 class 0x028000 [ 0.319512] pci 0000:04:00.0: reg 0x10: [mem 0xf0100000-0xf017ffff 64bit] [ 0.319579] pci 0000:04:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.319671] pci 0000:04:00.0: supports D1 D2 [ 0.319675] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327201] pci 0000:00:15.3: PCI bridge to [bus 04] [ 0.327223] pci 0000:00:15.3: bridge window [mem 0xf0100000-0xf01fffff] [ 0.330598] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.330751] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.330872] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.331039] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.331138] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.331237] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.331335] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.331433] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.331780] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.331911] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.332311] vgaarb: setting as boot device: PCI:0000:00:01.0 [ 0.332321] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.332332] vgaarb: loaded [ 0.332335] vgaarb: bridge control possible 0000:00:01.0 [ 0.332887] SCSI subsystem initialized [ 0.333128] libata version 3.00 loaded. [ 0.333220] ACPI: bus type USB registered [ 0.333269] usbcore: registered new interface driver usbfs [ 0.333290] usbcore: registered new interface driver hub [ 0.333568] usbcore: registered new device driver usb [ 0.333970] PCI: Using ACPI for IRQ routing [ 0.336305] PCI: pci_cache_line_size set to 64 bytes [ 0.336400] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.336404] e820: reserve RAM buffer [mem 0xdf9bf000-0xdfffffff] [ 0.336407] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff] [ 0.336410] e820: reserve RAM buffer [mem 0x187000000-0x187ffffff] [ 0.336674] NetLabel: Initializing [ 0.336678] NetLabel: domain hash size = 128 [ 0.336680] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.336709] NetLabel: unlabeled traffic allowed by default [ 0.337064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.337077] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.339221] Switched to clocksource hpet [ 0.353535] AppArmor: AppArmor Filesystem Enabled [ 0.353619] pnp: PnP ACPI init [ 0.353660] ACPI: bus type PNP registered [ 0.353940] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.353946] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.353955] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.354348] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.354460] system 00:02: [io 0x0400-0x04cf] could not be reserved [ 0.354466] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.354471] system 00:02: [io 0x04d6] has been reserved [ 0.354475] system 00:02: [io 0x0680-0x06ff] has been reserved [ 0.354479] system 00:02: [io 0x077a] has been reserved [ 0.354483] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.354487] system 00:02: [io 0x0c14] has been reserved [ 0.354491] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.354495] system 00:02: [io 0x0c6c] has been reserved [ 0.354499] system 00:02: [io 0x0c6f] has been reserved [ 0.354507] system 00:02: [io 0x0cd0-0x0cdb] has been reserved [ 0.354511] system 00:02: [io 0x0840-0x0847] has been reserved [ 0.354516] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.354675] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.354680] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.354685] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.355579] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.355684] pnp 00:05: Plug and Play ACPI device, IDs SYN1e70 SYN1e00 SYN0002 PNP0f13 (active) [ 0.356316] pnp: PnP ACPI: found 6 devices [ 0.356320] ACPI: bus type PNP unregistered [ 0.368287] pci 0000:04:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.368347] pci 0000:00:14.4: PCI bridge to [bus 01] [ 0.368366] pci 0000:00:15.0: PCI bridge to [bus 02] [ 0.368374] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf02fffff] [ 0.368386] pci 0000:00:15.1: PCI bridge to [bus 03] [ 0.368391] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] [ 0.368401] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.368416] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0180000-0xf018ffff pref] [ 0.368421] pci 0000:00:15.3: PCI bridge to [bus 04] [ 0.368429] pci 0000:00:15.3: bridge window [mem 0xf0100000-0xf01fffff] [ 0.368441] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.368445] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.368449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.368453] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.368457] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.368460] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.368464] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.368468] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.368472] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.368476] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.368479] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.368483] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.368486] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.368490] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.368494] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff] [ 0.368497] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff] [ 0.368501] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff] [ 0.368505] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.368510] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.368514] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.368517] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.368521] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.368524] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.368528] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.368532] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.368535] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.368539] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff] [ 0.368542] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.368546] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.368550] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.368553] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff] [ 0.368557] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff] [ 0.368561] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xfed3ffff] [ 0.368564] pci_bus 0000:01: resource 20 [mem 0xfed45000-0xffffffff] [ 0.368568] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff] [ 0.368572] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.368576] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.368580] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff] [ 0.368638] NET: Registered protocol family 2 [ 0.369037] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.369439] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.370083] TCP: Hash tables configured (established 65536 bind 65536) [ 0.370197] TCP: reno registered [ 0.370227] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.370335] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.370590] NET: Registered protocol family 1 [ 0.370631] pci 0000:00:01.0: Video device with shadowed ROM [ 1.059233] PCI: CLS 64 bytes, default 64 [ 1.059367] Trying to unpack rootfs image as initramfs... [ 1.699402] Freeing initrd memory: 19932K (ffff880035902000 - ffff880036c79000) [ 1.699531] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.699537] software IO TLB [mem 0xdb9bf000-0xdf9bf000] (64MB) mapped at [ffff8800db9bf000-ffff8800df9befff] [ 1.699647] Simple Boot Flag at 0x44 set to 0x1 [ 1.700027] microcode: CPU0: patch_level=0x0500010d [ 1.700043] microcode: CPU1: patch_level=0x0500010d [ 1.700341] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.700361] LVT offset 0 assigned for vector 0x400 [ 1.700455] perf: AMD IBS detected (0x000000ff) [ 1.700519] Scanning for low memory corruption every 60 seconds [ 1.701349] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.701391] Initialise system trusted keyring [ 1.701453] audit: initializing netlink subsys (disabled) [ 1.701485] audit: type=2000 audit(1415260165.584:1): initialized [ 1.702452] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.705934] zpool: loaded [ 1.705940] zbud: loaded [ 1.706573] VFS: Disk quotas dquot_6.5.2 [ 1.706686] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.708218] fuse init (API version 7.23) [ 1.708726] msgmni has been set to 11132 [ 1.708888] Key type big_key registered [ 1.709979] Key type asymmetric registered [ 1.709987] Asymmetric key parser 'x509' registered [ 1.710098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.710286] io scheduler noop registered [ 1.710294] io scheduler deadline registered (default) [ 1.710406] io scheduler cfq registered [ 1.711406] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.711444] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.711560] vesafb: mode is 1366x768x32, linelength=5632, pages=0 [ 1.711563] vesafb: scrolling: redraw [ 1.711567] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.711602] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 4224k, total 4224k [ 1.712005] Console: switching to colour frame buffer device 170x48 [ 1.712054] fb0: VESA VGA frame buffer device [ 1.762636] ACPI: AC Adapter [AC] (on-line) [ 1.762961] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.764473] ACPI: Lid Switch [LID] [ 1.764653] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.764662] ACPI: Power Button [PWRB] [ 1.766758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.766771] ACPI: Power Button [PWRF] [ 1.770815] ACPI: acpi_idle registered with cpuidle [ 1.801216] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.801225] ACPI: Thermal Zone [TSZ0] (35 C) [ 1.801317] GHES: HEST is not enabled! [ 1.801620] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.805972] ACPI: Battery Slot [BAT0] (battery present) [ 1.808171] Linux agpgart interface v0.103 [ 1.812485] brd: module loaded [ 1.814706] loop: module loaded [ 1.815201] libphy: Fixed MDIO Bus: probed [ 1.815208] tun: Universal TUN/TAP device driver, 1.6 [ 1.815211] tun: (C) 1999-2004 Max Krasnyansky [ 1.815457] PPP generic driver version 2.4.2 [ 1.815765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.815784] ehci-pci: EHCI PCI platform driver [ 1.816083] QUIRK: Enable AMD PLL fix [ 1.816124] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.816144] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.816155] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.816206] ehci-pci 0000:00:12.2: debug port 1 [ 1.816280] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034a000 [ 1.826396] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.826551] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.826556] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.826560] usb usb1: Product: EHCI Host Controller [ 1.826564] usb usb1: Manufacturer: Linux 3.16.0-25-generic ehci_hcd [ 1.826568] usb usb1: SerialNumber: 0000:00:12.2 [ 1.827131] hub 1-0:1.0: USB hub found [ 1.827153] hub 1-0:1.0: 5 ports detected [ 1.827827] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.827840] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 2 [ 1.827849] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.827864] ehci-pci 0000:00:16.2: debug port 1 [ 1.827913] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0348000 [ 1.838388] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.838531] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.838536] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.838540] usb usb2: Product: EHCI Host Controller [ 1.838544] usb usb2: Manufacturer: Linux 3.16.0-25-generic ehci_hcd [ 1.838548] usb usb2: SerialNumber: 0000:00:16.2 [ 1.839089] hub 2-0:1.0: USB hub found [ 1.839111] hub 2-0:1.0: 4 ports detected [ 1.839491] ehci-platform: EHCI generic platform driver [ 1.839520] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.839541] ohci-pci: OHCI PCI platform driver [ 1.839847] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.839863] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.839920] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034b000 [ 1.898416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.898426] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.898431] usb usb3: Product: OHCI PCI host controller [ 1.898435] usb usb3: Manufacturer: Linux 3.16.0-25-generic ohci_hcd [ 1.898438] usb usb3: SerialNumber: 0000:00:12.0 [ 1.898995] hub 3-0:1.0: USB hub found [ 1.899086] hub 3-0:1.0: 5 ports detected [ 1.899662] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.899675] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 4 [ 1.899726] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0349000 [ 1.958370] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.958380] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.958385] usb usb4: Product: OHCI PCI host controller [ 1.958389] usb usb4: Manufacturer: Linux 3.16.0-25-generic ohci_hcd [ 1.958392] usb usb4: SerialNumber: 0000:00:16.0 [ 1.958962] hub 4-0:1.0: USB hub found [ 1.959053] hub 4-0:1.0: 4 ports detected [ 1.959437] ohci-platform: OHCI generic platform driver [ 1.959471] uhci_hcd: USB Universal Host Controller Interface driver [ 1.959638] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.964925] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.964935] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.965713] mousedev: PS/2 mouse device common for all mice [ 1.966962] rtc_cmos 00:01: RTC can wake from S4 [ 1.967182] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.967260] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.967446] device-mapper: uevent: version 1.0.3 [ 1.967612] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.967654] ledtrig-cpu: registered to indicate activity on CPUs [ 1.967850] TCP: cubic registered [ 1.968134] NET: Registered protocol family 10 [ 1.968696] NET: Registered protocol family 17 [ 1.968738] Key type dns_resolver registered [ 1.969461] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.970086] Loading compiled-in X.509 certificates [ 1.972429] Loaded X.509 cert 'Magrathea: Glacier signing key: 5784eb6867a4540d81005486b7553828888a60e0' [ 1.972465] registered taskstats version 1 [ 1.978431] Key type trusted registered [ 1.984043] Key type encrypted registered [ 1.989454] AppArmor: AppArmor sha1 policy hashing enabled [ 1.989469] ima: No TPM chip found, activating TPM-bypass! [ 1.989524] evm: HMAC attrs: 0x1 [ 1.990274] Magic number: 6:10:824 [ 1.990437] rtc_cmos 00:01: setting system clock to 2014-11-06 07:49:26 UTC (1415260166) [ 1.990632] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.990860] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.990863] EDD information not available. [ 1.991024] PM: Hibernation image not present or could not be loaded. [ 1.994149] Freeing unused kernel memory: 1360K (ffffffff81d2e000 - ffffffff81e82000) [ 1.994159] Write protecting the kernel read-only data: 12288k [ 1.997172] Freeing unused kernel memory: 448K (ffff880001790000 - ffff880001800000) [ 2.000191] Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000) [ 2.037023] systemd-udevd[102]: starting version 208 [ 2.038385] random: systemd-udevd urandom read with 6 bits of entropy available [ 2.193139] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.193161] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.194846] ahci 0000:00:11.0: version 3.0 [ 2.199428] rtsx_pci 0000:02:00.0: irq 40 for MSI/MSI-X [ 2.199464] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 40 [ 2.200113] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 2.200160] ahci 0000:00:11.0: irq 42 for MSI/MSI-X [ 2.200253] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.200260] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.201017] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004c84000, 28:92:4a:24:0b:d1, XID 0c900800 IRQ 41 [ 2.201025] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.240087] scsi0 : ahci [ 2.244618] scsi1 : ahci [ 2.244833] ata1: SATA max UDMA/133 abar m2048@0xf034c000 port 0xf034c100 irq 42 [ 2.244839] ata2: SATA max UDMA/133 abar m2048@0xf034c000 port 0xf034c180 irq 42 [ 2.398125] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 2.541402] usb 1-3: New USB device found, idVendor=090c, idProduct=237c [ 2.541419] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.541427] usb 1-3: Product: HP Webcam-50 [ 2.541435] usb 1-3: Manufacturer: Image Processor [ 2.698070] tsc: Refined TSC clocksource calibration: 1696.914 MHz [ 2.733761] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.737499] ata2.00: ATAPI: hp DVDRAM GT50N, MP01, max UDMA/100 [ 2.743058] ata2.00: configured for UDMA/100 [ 2.805696] usb 3-2: new full-speed USB device number 2 using ohci-pci [ 2.989653] usb 3-2: New USB device found, idVendor=0a12, idProduct=0001 [ 2.989669] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.989678] usb 3-2: Product: CSR8510 A10 [ 3.108845] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400, board id: 2068, fw id: 1028260 [ 3.153546] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 3.185397] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.216153] ata1.00: ATA-7: SAMSUNG SSD PB22-JS3 2.5" 128GB, VBM19D1Q, max UDMA/100 [ 3.216169] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.217737] ata1.00: configured for UDMA/100 [ 3.218281] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PB22 9D1Q PQ: 0 ANSI: 5 [ 3.218986] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.219055] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.219391] sd 0:0:0:0: [sda] Write Protect is off [ 3.219397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.219472] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.221203] sda: sda1 sda2 < sda5 sda6 > [ 3.222522] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.222852] scsi 1:0:0:0: CD-ROM hp DVDRAM GT50N MP01 PQ: 0 ANSI: 5 [ 3.242103] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.242113] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.242432] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.242565] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.329832] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.697443] init: plymouth-upstart-bridge main process (163) terminated with status 1 [ 3.697545] init: plymouth-upstart-bridge main process ended, respawning [ 3.701175] Switched to clocksource tsc [ 3.706729] init: plymouth-upstart-bridge main process (186) terminated with status 1 [ 3.706793] init: plymouth-upstart-bridge main process ended, respawning [ 4.042501] Adding 5858300k swap on /dev/sda6. Priority:-1 extents:1 across:5858300k SSFS [ 4.393969] systemd-udevd[307]: starting version 208 [ 4.469597] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.614088] random: nonblocking pool is initialized [ 4.717756] lp: driver loaded but no devices found [ 4.748705] ppdev: user-space parallel port driver [ 4.817490] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 4.936126] acpi device:00: registered as cooling_device2 [ 4.936330] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 5.075298] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 5.093057] wmi: Mapper loaded [ 5.096080] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\_SB_.PCI0.SMBS.SMB0) (20140424/utaddress-258) [ 5.096097] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.117555] XFS (sda5): Mounting V4 Filesystem [ 5.126075] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.174328] [drm] Initialized drm 1.1.0 20060810 [ 6.452042] XFS (sda5): Ending clean mount [ 6.557072] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.602329] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 6.607864] audit: type=1400 audit(1415260171.116:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=512 comm="apparmor_parser" [ 6.607883] audit: type=1400 audit(1415260171.116:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser" [ 6.607893] audit: type=1400 audit(1415260171.116:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser" [ 6.727940] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.776135] cfg80211: Calling CRDA to update world regulatory domain [ 6.856247] [drm] radeon kernel modesetting enabled. [ 6.856343] checking generic (e0000000 420000) vs hw (e0000000 10000000) [ 6.856347] fb: switching to radeondrmfb from VESA VGA [ 6.856396] Console: switching to colour dummy device 80x25 [ 6.986474] [drm] initializing kernel modesetting (PALM 0x1002:0x9808 0x103C:0x1885). [ 6.986513] [drm] register mmio base: 0xF0300000 [ 6.986516] [drm] register mmio size: 262144 [ 6.987290] ATOM BIOS: HP [ 6.987381] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) [ 6.987386] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF [ 6.987390] [drm] Detected VRAM RAM=384M, BAR=256M [ 6.987393] [drm] RAM width 32bits DDR [ 6.994425] [TTM] Zone kernel: Available graphics memory: 2851062 kiB [ 6.994433] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 6.994436] [TTM] Initializing pool allocator [ 6.994448] [TTM] Initializing DMA pool allocator [ 6.994504] [drm] radeon: 384M of VRAM memory ready [ 6.994507] [drm] radeon: 1024M of GTT memory ready. [ 6.994534] [drm] Loading PALM Microcode [ 7.173143] [drm] Internal thermal controller without fan control [ 7.174235] [drm] Found smc ucode version: 0x00010601 [ 7.174346] [drm] radeon: dpm initialized [ 7.186534] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 7.262482] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). [ 7.306717] radeon 0000:00:01.0: WB enabled [ 7.306732] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff88017da4fc00 [ 7.306738] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff88017da4fc0c [ 7.327304] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005c32118 [ 7.348120] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.348130] [drm] Driver supports precise vblank timestamp query. [ 7.348177] radeon 0000:00:01.0: irq 43 for MSI/MSI-X [ 7.348207] radeon 0000:00:01.0: radeon: using MSI. [ 7.348251] [drm] radeon: irq initialized. [ 7.408409] [drm] ring test on 0 succeeded in 1 usecs [ 7.408426] [drm] ring test on 3 succeeded in 1 usecs [ 7.411301] audit: type=1400 audit(1415260171.920:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=769 comm="apparmor_parser" [ 7.411322] audit: type=1400 audit(1415260171.920:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=769 comm="apparmor_parser" [ 7.411332] audit: type=1400 audit(1415260171.920:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=769 comm="apparmor_parser" [ 7.482750] [drm] ring test on 5 succeeded in 1 usecs [ 7.531569] [drm] UVD initialized successfully. [ 7.536595] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.536643] [drm] ib test on ring 3 succeeded in 0 usecs [ 7.573992] ath: phy0: Enable LNA combining [ 7.576160] ath: phy0: ASPM enabled: 0x42 [ 7.576171] ath: EEPROM regdomain: 0x60 [ 7.576174] ath: EEPROM indicates we should expect a direct regpair map [ 7.576180] ath: Country alpha2 being used: 00 [ 7.576183] ath: Regpair used: 0x60 [ 7.606434] init: cups main process (776) killed by HUP signal [ 7.606466] init: cups main process ended, respawning [ 7.653144] [drm] ib test on ring 5 succeeded [ 7.667618] Bluetooth: Core ver 2.19 [ 7.667847] NET: Registered protocol family 31 [ 7.667851] Bluetooth: HCI device and connection manager initialized [ 7.667868] Bluetooth: HCI socket layer initialized [ 7.667873] Bluetooth: L2CAP socket layer initialized [ 7.667894] Bluetooth: SCO socket layer initialized [ 7.712785] Bluetooth: RFCOMM TTY layer initialized [ 7.712815] Bluetooth: RFCOMM socket layer initialized [ 7.712834] Bluetooth: RFCOMM ver 1.11 [ 7.728181] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.728191] Bluetooth: BNEP filters: protocol multicast [ 7.728208] Bluetooth: BNEP socket layer initialized [ 7.733463] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 7.736012] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90006700000, irq=23 [ 7.754759] [drm] radeon atom DIG backlight initialized [ 7.754775] [drm] Radeon Display Connectors [ 7.754778] [drm] Connector 0: [ 7.754782] [drm] LVDS-1 [ 7.754784] [drm] HPD1 [ 7.754788] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 7.754791] [drm] Encoders: [ 7.754793] [drm] LCD1: INTERNAL_UNIPHY [ 7.754796] [drm] Connector 1: [ 7.754798] [drm] HDMI-A-1 [ 7.754800] [drm] HPD2 [ 7.754803] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 7.754805] [drm] Encoders: [ 7.754807] [drm] DFP1: INTERNAL_UNIPHY [ 7.754809] [drm] Connector 2: [ 7.754811] [drm] VGA-1 [ 7.754814] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 7.754829] [drm] Encoders: [ 7.754832] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 8.038456] kvm: Nested Virtualization enabled [ 8.038469] kvm: Nested Paging enabled [ 8.260073] usbcore: registered new interface driver btusb [ 8.978443] init: failsafe main process (1098) killed by TERM signal [ 9.186515] init: samba-ad-dc main process (1166) terminated with status 1 [ 9.191734] [drm] fb mappable at 0xE0477000 [ 9.191744] [drm] vram apper at 0xE0000000 [ 9.191747] [drm] size 8294400 [ 9.191749] [drm] fb depth is 24 [ 9.191752] [drm] pitch is 7680 [ 9.192036] fbcon: radeondrmfb (fb0) is primary device [ 9.192176] Console: switching to colour frame buffer device 170x48 [ 9.192235] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 9.192239] radeon 0000:00:01.0: registered panic notifier [ 9.359576] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0 [ 9.363392] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X [ 9.412608] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 9.412623] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.412628] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 9.412632] sound hdaudioC1D0: mono: mono_out=0x0 [ 9.412636] sound hdaudioC1D0: inputs: [ 9.412641] sound hdaudioC1D0: Mic=0x18 [ 9.412645] sound hdaudioC1D0: Internal Mic=0x12 [ 9.417233] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7 [ 9.422723] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 [ 9.423097] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 [ 9.466313] input: HP WMI hotkeys as /devices/virtual/input/input10 [ 9.683766] media: Linux media interface: v0.10 [ 9.780491] audit: type=1400 audit(1415260174.292:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1358 comm="apparmor_parser" [ 9.780514] audit: type=1400 audit(1415260174.292:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1358 comm="apparmor_parser" [ 9.799636] Linux video capture interface: v2.00 [ 9.808120] audit: type=1400 audit(1415260174.316:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1358 comm="apparmor_parser" [ 9.808148] audit: type=1400 audit(1415260174.316:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1358 comm="apparmor_parser" [ 9.808159] audit: type=1400 audit(1415260174.316:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1358 comm="apparmor_parser" [ 9.809310] cfg80211: World regulatory domain updated: [ 9.809323] cfg80211: DFS Master region: unset [ 9.809326] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 9.809332] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 9.809336] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 9.809341] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 9.809344] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 9.809348] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 9.880165] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236) [ 9.880185] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff88018083dc30), AE_AML_BUFFER_LIMIT (20140424/psparse-536) [ 9.880214] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88018083e500), AE_AML_BUFFER_LIMIT (20140424/psparse-536) [ 9.882085] audit: type=1400 audit(1415260174.392:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1358 comm="apparmor_parser" [ 9.882104] audit: type=1400 audit(1415260174.392:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1358 comm="apparmor_parser" [ 10.117821] uvcvideo: Found UVC 1.00 device HP Webcam-50 (090c:237c) [ 10.126768] input: HP Webcam-50 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input11 [ 10.131200] usbcore: registered new interface driver uvcvideo [ 10.131209] USB Video Class driver (1.1.1) [ 10.171240] systemd-logind[1379]: New seat seat0. [ 10.172983] systemd-logind[1379]: Watching system buttons on /dev/input/event2 (Power Button) [ 10.173140] systemd-logind[1379]: Watching system buttons on /dev/input/event5 (Video Bus) [ 10.173283] systemd-logind[1379]: Watching system buttons on /dev/input/event1 (Power Button) [ 10.173421] systemd-logind[1379]: Watching system buttons on /dev/input/event0 (Lid Switch) [ 10.345916] r8169 0000:03:00.0 eth0: link down [ 10.346004] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.396240] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.523136] wlan0: authenticate with 80:c6:ab:29:68:09 [ 12.541566] wlan0: send auth to 80:c6:ab:29:68:09 (try 1/3) [ 12.543603] wlan0: authenticated [ 12.550230] wlan0: associate with 80:c6:ab:29:68:09 (try 1/3) [ 12.553964] wlan0: RX AssocResp from 80:c6:ab:29:68:09 (capab=0x411 status=0 aid=2) [ 12.554058] wlan0: associated [ 12.554129] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 12.646450] wlan0: deauthenticating from 80:c6:ab:29:68:09 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 12.660312] wlan0: authenticate with 80:c6:ab:29:68:09 [ 12.670792] wlan0: send auth to 80:c6:ab:29:68:09 (try 1/3) [ 12.671136] cfg80211: Calling CRDA to update world regulatory domain [ 12.675573] wlan0: authenticated [ 12.678529] wlan0: associate with 80:c6:ab:29:68:09 (try 1/3) [ 12.680674] cfg80211: World regulatory domain updated: [ 12.680689] cfg80211: DFS Master region: unset [ 12.680693] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 12.680699] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 12.680703] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 12.680707] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 12.680711] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 12.680714] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 12.682136] wlan0: RX AssocResp from 80:c6:ab:29:68:09 (capab=0x411 status=0 aid=2) [ 12.682226] wlan0: associated [ 13.502622] init: plymouth-upstart-bridge main process ended, respawning [ 13.731071] systemd-logind[1379]: Failed to start unit user@112.service: Unknown unit: user@112.service [ 13.731094] systemd-logind[1379]: Failed to start user service: Unknown unit: user@112.service [ 13.743895] systemd-logind[1379]: New session c1 of user lightdm. [ 13.743968] systemd-logind[1379]: Linked /tmp/.X11-unix/X0 to /run/user/112/X11-display. [ 14.118176] Ebtables v2.0 registered [ 14.167057] Bridge firewalling registered [ 14.557759] init: plymouth-stop pre-start process (2325) terminated with status 1 [ 16.189994] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 20.102119] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236) [ 20.102139] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff88018083dc30), AE_AML_BUFFER_LIMIT (20140424/psparse-536) [ 20.102161] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88018083e500), AE_AML_BUFFER_LIMIT (20140424/psparse-536) [ 24.481869] systemd-logind[1379]: Failed to start unit user@1000.service: Unknown unit: user@1000.service [ 24.481893] systemd-logind[1379]: Failed to start user service: Unknown unit: user@1000.service [ 24.501248] systemd-logind[1379]: New session c2 of user michal. [ 24.501333] systemd-logind[1379]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display. [ 37.615815] audit_printk_skb: 48 callbacks suppressed [ 37.615826] audit: type=1400 audit(1415260202.140:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3943 comm="apparmor_parser" [ 37.615848] audit: type=1400 audit(1415260202.140:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3943 comm="apparmor_parser" [ 37.647291] audit: type=1400 audit(1415260202.172:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=3943 comm="apparmor_parser" [ 45.965188] hidraw: raw HID events driver (C) Jiri Kosina [ 45.979047] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 45.979083] Bluetooth: HIDP socket layer initialized [ 45.990020] hid-generic 0005:046D:B006.0001: unknown main item tag 0x0 [ 45.992963] input: Dell BT Travel Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/bluetooth/hci0/hci0:71/0005:046D:B006.0001/input/input12 [ 45.994280] hid-generic 0005:046D:B006.0001: input,hidraw0: BLUETOOTH HID v1.24 Mouse [Dell BT Travel Mouse] on 00:1a:7d:da:71:05 [ 1956.806225] systemd-logind[1379]: New session c3 of user michal. [ 1957.603491] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 [ 1958.942502] init: anacron main process (1677) killed by TERM signal [ 2484.313340] audit: type=1400 audit(1415262650.364:34): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=6718 comm=444E53205265736F6C766572202331 family="netlink" sock_type="raw" protocol=0 [ 2484.499064] audit: type=1400 audit(1415262650.548:35): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=6718 comm=444E53205265736F6C766572202331 family="netlink" sock_type="raw" protocol=0 [ 2883.113548] wlan0: deauthenticating from 80:c6:ab:29:68:09 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2883.126955] cfg80211: Calling CRDA to update world regulatory domain [ 2883.174127] cfg80211: World regulatory domain updated: [ 2883.174141] cfg80211: DFS Master region: unset [ 2883.174144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 2883.174150] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 2883.174154] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 2883.174158] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 2883.174162] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 2883.174166] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 2884.950951] PM: Syncing filesystems ... done. [ 2885.013029] PM: Preparing system for mem sleep [ 2885.315163] Freezing user space processes ... (elapsed 0.005 seconds) done. [ 2885.320552] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2885.322287] PM: Entering mem sleep [ 2885.322435] Suspending console(s) (use no_console_suspend to debug) [ 2885.323057] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2885.323241] sd 0:0:0:0: [sda] Stopping disk [ 2886.189843] PM: suspend of devices complete after 867.740 msecs [ 2886.190471] PM: late suspend of devices complete after 0.620 msecs [ 2886.192175] r8169 0000:03:00.0: System wakeup enabled by ACPI [ 2886.192244] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI [ 2886.192276] ohci-pci 0000:00:16.0: System wakeup enabled by ACPI [ 2886.192290] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI [ 2886.192304] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI [ 2886.205901] PM: noirq suspend of devices complete after 15.428 msecs [ 2886.205936] ACPI: Preparing to enter system sleep state S3 [ 2886.211462] PM: Saving platform NVS memory [ 2886.214021] Disabling non-boot CPUs ... [ 2886.214601] Broke affinity for irq 18 [ 2886.215648] kvm: disabling virtualization on CPU1 [ 2886.215672] smpboot: CPU 1 is now offline [ 2886.216777] ACPI: Low-level resume complete [ 2886.216865] PM: Restoring platform NVS memory [ 2886.218281] LVT offset 0 assigned for vector 0x400 [ 2886.218471] Enabling non-boot CPUs ... [ 2886.218550] x86: Booting SMP configuration: [ 2886.218552] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 2886.229620] kvm: enabling virtualization on CPU1 [ 2886.232254] CPU1 is up [ 2886.233003] ACPI: Waking up from system sleep state S3 [ 2886.243211] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI [ 2886.243537] ohci-pci 0000:00:16.0: System wakeup disabled by ACPI [ 2886.259186] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI [ 2886.259235] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI [ 2886.259785] PM: noirq resume of devices complete after 16.889 msecs [ 2886.260293] PM: early resume of devices complete after 0.433 msecs [ 2886.260978] [drm] Found smc ucode version: 0x00010601 [ 2886.262743] ath: phy0: ASPM enabled: 0x42 [ 2886.263511] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X [ 2886.266091] sd 0:0:0:0: [sda] Starting disk [ 2886.267556] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). [ 2886.268024] radeon 0000:00:01.0: WB enabled [ 2886.268030] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff88017da4fc00 [ 2886.268033] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff88017da4fc0c [ 2886.287917] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005c32118 [ 2886.304207] [drm] ring test on 0 succeeded in 1 usecs [ 2886.304215] [drm] ring test on 3 succeeded in 1 usecs [ 2886.304493] r8169 0000:03:00.0: System wakeup disabled by ACPI [ 2886.359857] [drm] ring test on 5 succeeded in 1 usecs [ 2886.379913] [drm] UVD initialized successfully. [ 2886.380040] [drm] ib test on ring 0 succeeded in 0 usecs [ 2886.380080] [drm] ib test on ring 3 succeeded in 1 usecs [ 2886.401969] [drm] ib test on ring 5 succeeded [ 2886.711119] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 2886.735015] usb 3-2: reset full-speed USB device number 2 using ohci-pci [ 2886.758824] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2886.762965] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2886.764759] ata2.00: configured for UDMA/100 [ 2887.248451] ata1.00: configured for UDMA/100 [ 2887.931877] PM: resume of devices complete after 1672.813 msecs [ 2887.933373] PM: Finishing wakeup. [ 2887.933376] Restarting tasks ... done. [ 2888.003320] video LNXVIDEO:00: Restoring backlight state [ 2889.444673] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 2889.617468] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 2890.527127] hid-generic 0005:046D:B006.0002: unknown main item tag 0x0 [ 2890.527321] input: Dell BT Travel Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/bluetooth/hci0/hci0:72/0005:046D:B006.0002/input/input13 [ 2890.528131] hid-generic 0005:046D:B006.0002: input,hidraw0: BLUETOOTH HID v1.24 Mouse [Dell BT Travel Mouse] on 00:1a:7d:da:71:05 [ 2890.794761] systemd-logind[1379]: New session c4 of user michal. [ 2890.795314] systemd-logind[1379]: Operation finished. [ 2890.925665] r8169 0000:03:00.0 eth0: link down [ 2890.925922] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2890.970296] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2892.116687] wlan0: authenticate with 80:c6:ab:29:68:09 [ 2892.136077] wlan0: send auth to 80:c6:ab:29:68:09 (try 1/3) [ 2892.138220] wlan0: authenticated [ 2892.138828] wlan0: associate with 80:c6:ab:29:68:09 (try 1/3) [ 2892.142375] wlan0: RX AssocResp from 80:c6:ab:29:68:09 (capab=0x411 status=0 aid=2) [ 2892.142476] wlan0: associated [ 2892.142543] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3452.380263] perf interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 4121.571363] systemd-hostnamed[9557]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 4339.611833] wlan0: deauthenticating from 80:c6:ab:29:68:09 by local choice (Reason: 3=DEAUTH_LEAVING) [ 4339.621240] cfg80211: Calling CRDA to update world regulatory domain [ 4339.659631] cfg80211: World regulatory domain updated: [ 4339.659645] cfg80211: DFS Master region: unset [ 4339.659648] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4339.659654] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4339.659659] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4339.659662] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4339.659666] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4339.659670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4341.396044] init: anacron main process (7329) killed by TERM signal [ 4342.107126] PM: Syncing filesystems ... done. [ 4342.168323] PM: Preparing system for mem sleep [ 4342.304750] Freezing user space processes ... (elapsed 0.005 seconds) done. [ 4342.310499] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4342.312176] PM: Entering mem sleep [ 4342.312323] Suspending console(s) (use no_console_suspend to debug) [ 4342.313010] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4342.313167] sd 0:0:0:0: [sda] Stopping disk [ 4343.252227] PM: suspend of devices complete after 940.217 msecs [ 4343.252875] PM: late suspend of devices complete after 0.639 msecs [ 4343.254613] r8169 0000:03:00.0: System wakeup enabled by ACPI [ 4343.254627] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI [ 4343.254678] ohci-pci 0000:00:16.0: System wakeup enabled by ACPI [ 4343.254707] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI [ 4343.254716] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI [ 4343.268418] PM: noirq suspend of devices complete after 15.541 msecs [ 4343.268453] ACPI: Preparing to enter system sleep state S3 [ 4343.274295] PM: Saving platform NVS memory [ 4343.276961] Disabling non-boot CPUs ... [ 4343.277983] Broke affinity for irq 17 [ 4343.277991] Broke affinity for irq 18 [ 4343.279032] kvm: disabling virtualization on CPU1 [ 4343.379652] smpboot: CPU 1 is now offline [ 4343.380675] ACPI: Low-level resume complete [ 4343.380764] PM: Restoring platform NVS memory [ 4343.382139] LVT offset 0 assigned for vector 0x400 [ 4343.382323] Enabling non-boot CPUs ... [ 4343.382403] x86: Booting SMP configuration: [ 4343.382404] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 4343.393473] kvm: enabling virtualization on CPU1 [ 4343.396074] CPU1 is up [ 4343.396799] ACPI: Waking up from system sleep state S3 [ 4343.408360] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI [ 4343.408701] ohci-pci 0000:00:16.0: System wakeup disabled by ACPI [ 4343.421694] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI [ 4343.421714] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI [ 4343.422080] PM: noirq resume of devices complete after 14.031 msecs [ 4343.422616] PM: early resume of devices complete after 0.458 msecs [ 4343.423297] [drm] Found smc ucode version: 0x00010601 [ 4343.424872] ath: phy0: ASPM enabled: 0x42 [ 4343.425083] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X [ 4343.429555] sd 0:0:0:0: [sda] Starting disk [ 4343.429930] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). [ 4343.430123] radeon 0000:00:01.0: WB enabled [ 4343.430129] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff88017da4fc00 [ 4343.430133] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff88017da4fc0c [ 4343.450529] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005c32118 [ 4343.466808] [drm] ring test on 0 succeeded in 1 usecs [ 4343.466816] [drm] ring test on 3 succeeded in 1 usecs [ 4343.467080] r8169 0000:03:00.0: System wakeup disabled by ACPI [ 4343.522469] [drm] ring test on 5 succeeded in 1 usecs [ 4343.532414] [drm] UVD initialized successfully. [ 4343.532457] [drm] ib test on ring 0 succeeded in 0 usecs [ 4343.532496] [drm] ib test on ring 3 succeeded in 1 usecs [ 4343.552958] [drm] ib test on ring 5 succeeded [ 4343.765512] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 4343.793390] usb 3-2: reset full-speed USB device number 2 using ohci-pci [ 4343.917300] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4343.923147] ata2.00: configured for UDMA/100 [ 4344.085110] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4344.558408] ata1.00: configured for UDMA/100 [ 4345.088038] PM: resume of devices complete after 1666.648 msecs [ 4345.089224] PM: Finishing wakeup. [ 4345.089230] Restarting tasks ... done. [ 4345.169067] video LNXVIDEO:00: Restoring backlight state [ 4347.618089] systemd-logind[1379]: New session c5 of user michal. [ 4347.618740] systemd-logind[1379]: Operation finished. [ 4347.748177] r8169 0000:03:00.0 eth0: link down [ 4347.748326] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4347.785502] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4349.753154] wlan0: authenticate with 80:c6:ab:29:68:09 [ 4349.771779] wlan0: send auth to 80:c6:ab:29:68:09 (try 1/3) [ 4349.773783] wlan0: authenticated [ 4349.780627] wlan0: associate with 80:c6:ab:29:68:09 (try 1/3) [ 4349.784190] wlan0: RX AssocResp from 80:c6:ab:29:68:09 (capab=0x411 status=0 aid=3) [ 4349.784280] wlan0: associated [ 4349.784341] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4349.825396] wlan0: deauthenticating from 80:c6:ab:29:68:09 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 4349.835256] cfg80211: Calling CRDA to update world regulatory domain [ 4349.844688] wlan0: authenticate with 80:c6:ab:29:68:09 [ 4349.862382] wlan0: send auth to 80:c6:ab:29:68:09 (try 1/3) [ 4349.864481] wlan0: authenticated [ 4349.872578] wlan0: associate with 80:c6:ab:29:68:09 (try 1/3) [ 4349.876170] wlan0: RX AssocResp from 80:c6:ab:29:68:09 (capab=0x411 status=0 aid=3) [ 4349.876275] wlan0: associated [ 4349.912818] cfg80211: World regulatory domain updated: [ 4349.912838] cfg80211: DFS Master region: unset [ 4349.912843] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4349.912849] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4349.912854] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4349.912858] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4349.912861] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4349.912865] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4370.104247] hid-generic 0005:046D:B006.0003: unknown main item tag 0x0 [ 4370.104442] input: Dell BT Travel Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/bluetooth/hci0/hci0:72/0005:046D:B006.0003/input/input14 [ 4370.104871] hid-generic 0005:046D:B006.0003: input,hidraw0: BLUETOOTH HID v1.24 Mouse [Dell BT Travel Mouse] on 00:1a:7d:da:71:05 [ 6410.093439] systemd-logind[1379]: Lid closed. [ 6552.242874] systemd-logind[1379]: Lid opened. [ 7885.985933] wlan0: deauthenticating from 80:c6:ab:29:68:09 by local choice (Reason: 3=DEAUTH_LEAVING) [ 7885.996827] cfg80211: Calling CRDA to update world regulatory domain [ 7886.036224] cfg80211: World regulatory domain updated: [ 7886.036237] cfg80211: DFS Master region: unset [ 7886.036241] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7886.036247] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 7886.036251] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 7886.036255] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 7886.036259] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 7886.036262] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 7887.691316] init: anacron main process (11337) killed by TERM signal [ 7887.959548] PM: Syncing filesystems ... done. [ 7888.003527] PM: Preparing system for mem sleep [ 7888.094274] Freezing user space processes ... (elapsed 0.006 seconds) done. [ 7888.100526] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7888.102166] PM: Entering mem sleep [ 7888.102310] Suspending console(s) (use no_console_suspend to debug) [ 7888.102973] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7888.103244] sd 0:0:0:0: [sda] Stopping disk [ 7888.905569] PM: suspend of devices complete after 803.540 msecs [ 7888.906220] PM: late suspend of devices complete after 0.644 msecs [ 7888.907585] r8169 0000:03:00.0: System wakeup enabled by ACPI [ 7888.907641] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI [ 7888.907665] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI [ 7888.907676] ohci-pci 0000:00:16.0: System wakeup enabled by ACPI [ 7888.907713] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI [ 7888.921604] PM: noirq suspend of devices complete after 15.382 msecs [ 7888.921639] ACPI: Preparing to enter system sleep state S3 [ 7888.927427] PM: Saving platform NVS memory [ 7888.930102] Disabling non-boot CPUs ... [ 7888.931114] Broke affinity for irq 17 [ 7888.932157] kvm: disabling virtualization on CPU1 [ 7889.033032] smpboot: CPU 1 is now offline [ 7889.034042] ACPI: Low-level resume complete [ 7889.034131] PM: Restoring platform NVS memory [ 7889.035438] LVT offset 0 assigned for vector 0x400 [ 7889.035622] Enabling non-boot CPUs ... [ 7889.035702] x86: Booting SMP configuration: [ 7889.035704] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 7889.046771] kvm: enabling virtualization on CPU1 [ 7889.049375] CPU1 is up [ 7889.051557] ACPI: Waking up from system sleep state S3 [ 7889.062571] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI [ 7889.062986] ohci-pci 0000:00:16.0: System wakeup disabled by ACPI [ 7889.074800] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI [ 7889.079278] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI [ 7889.079403] PM: noirq resume of devices complete after 17.255 msecs [ 7889.079963] PM: early resume of devices complete after 0.481 msecs [ 7889.080487] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X [ 7889.080659] [drm] Found smc ucode version: 0x00010601 [ 7889.082864] ath: phy0: ASPM enabled: 0x42 [ 7889.084845] sd 0:0:0:0: [sda] Starting disk [ 7889.085086] r8169 0000:03:00.0: System wakeup disabled by ACPI [ 7889.087613] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). [ 7889.087866] radeon 0000:00:01.0: WB enabled [ 7889.087871] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff88017da4fc00 [ 7889.087874] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff88017da4fc0c [ 7889.107979] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90005c32118 [ 7889.126619] [drm] ring test on 0 succeeded in 1 usecs [ 7889.126630] [drm] ring test on 3 succeeded in 1 usecs [ 7889.182292] [drm] ring test on 5 succeeded in 1 usecs [ 7889.202140] [drm] UVD initialized successfully. [ 7889.202182] [drm] ib test on ring 0 succeeded in 0 usecs [ 7889.202218] [drm] ib test on ring 3 succeeded in 1 usecs [ 7889.222780] [drm] ib test on ring 5 succeeded [ 7889.422807] usb 1-3: reset high-speed USB device number 3 using ehci-pci [ 7889.450526] usb 3-2: reset full-speed USB device number 2 using ohci-pci [ 7889.658435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7889.658481] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7889.664223] ata2.00: configured for UDMA/100 [ 7889.848937] ata1.00: configured for UDMA/100 [ 7890.757387] PM: resume of devices complete after 1678.658 msecs [ 7890.758428] PM: Finishing wakeup. [ 7890.758432] Restarting tasks ... done. [ 7890.837257] video LNXVIDEO:00: Restoring backlight state [ 7893.307590] systemd-logind[1379]: New session c6 of user michal. [ 7893.308130] systemd-logind[1379]: Operation finished. [ 7893.437506] r8169 0000:03:00.0 eth0: link down [ 7893.438622] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7893.475426] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7895.467190] wlan0: authenticate with 80:c6:ab:29:68:09 [ 7895.492239] wlan0: send auth to 80:c6:ab:29:68:09 (try 1/3) [ 7895.494338] wlan0: authenticated [ 7895.498098] wlan0: associate with 80:c6:ab:29:68:09 (try 1/3) [ 7895.501644] wlan0: RX AssocResp from 80:c6:ab:29:68:09 (capab=0x411 status=0 aid=3) [ 7895.501744] wlan0: associated [ 7895.501806] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 7895.547641] wlan0: deauthenticating from 80:c6:ab:29:68:09 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 7895.556056] cfg80211: Calling CRDA to update world regulatory domain [ 7895.562085] wlan0: authenticate with 80:c6:ab:29:68:09 [ 7895.578111] wlan0: send auth to 80:c6:ab:29:68:09 (try 1/3) [ 7895.580179] wlan0: authenticated [ 7895.590183] wlan0: associate with 80:c6:ab:29:68:09 (try 1/3) [ 7895.593710] wlan0: RX AssocResp from 80:c6:ab:29:68:09 (capab=0x411 status=0 aid=3) [ 7895.593860] wlan0: associated [ 7895.624865] cfg80211: World regulatory domain updated: [ 7895.624880] cfg80211: DFS Master region: unset [ 7895.624884] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7895.624890] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 7895.624895] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 7895.624899] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 7895.624903] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 7895.624906] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 7908.299536] hid-generic 0005:046D:B006.0004: unknown main item tag 0x0 [ 7908.299704] input: Dell BT Travel Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/bluetooth/hci0/hci0:72/0005:046D:B006.0004/input/input15 [ 7908.302526] hid-generic 0005:046D:B006.0004: input,hidraw0: BLUETOOTH HID v1.24 Mouse [Dell BT Travel Mouse] on 00:1a:7d:da:71:05 [ 9217.248823] audit: type=1400 audit(1415451153.373:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=13103 comm="apparmor_parser" [ 9217.248852] audit: type=1400 audit(1415451153.373:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=13103 comm="apparmor_parser" [ 9217.266647] audit: type=1400 audit(1415451153.393:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=13103 comm="apparmor_parser" [10085.747789] systemd-logind[1379]: Lid closed. [15995.784007] systemd-logind[1379]: Lid opened. [16009.843268] hid-generic 0005:046D:B006.0005: unknown main item tag 0x0 [16009.843437] input: Dell BT Travel Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/bluetooth/hci0/hci0:72/0005:046D:B006.0005/input/input16 [16009.845773] hid-generic 0005:046D:B006.0005: input,hidraw0: BLUETOOTH HID v1.24 Mouse [Dell BT Travel Mouse] on 00:1a:7d:da:71:05 [16927.452263] audit: type=1400 audit(1415458869.309:39): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=13694 comm=444E53205265736F6C766572202331 family="netlink" sock_type="raw" protocol=0 [16927.922176] audit: type=1400 audit(1415458869.781:40): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=13694 comm=444E53205265736F6C766572202331 family="netlink" sock_type="raw" protocol=0 [17052.660353] usb 3-1: new full-speed USB device number 3 using ohci-pci [17052.838226] usb 3-1: New USB device found, idVendor=043d, idProduct=00cd [17052.838244] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [17052.838252] usb 3-1: Product: Lexmark E120 [17052.838260] usb 3-1: Manufacturer: Lexmark International [17052.838268] usb 3-1: SerialNumber: 994NL93 [17053.089535] usblp 3-1:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x043D pid 0x00CD [17053.089604] usbcore: registered new interface driver usblp [17079.538966] usblp0: removed [17215.175493] usblp 3-1:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x043D pid 0x00CD [17324.754568] usb 3-1: USB disconnect, device number 3 [17324.755033] usblp0: removed