[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-18-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #32~precise1-Ubuntu SMP Thu Feb 20 17:52:10 UTC 2014 (Ubuntu 3.11.0-18.32~precise1-generic 3.11.10.4) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11.0-18-generic root=UUID=edccfd23-3c9e-4e67-bd2d-db904c7dbaee ro crashkernel=384M-2G:64M,2G-:128M quiet splash radeon.modeset=1 vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfddffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfde0000-0x00000000cfde2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfde3000-0x00000000cfdeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA74GM-S2H/GA-MA74GM-S2H, BIOS FB 03/03/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 00CFE00000 mask FFFFE00000 uncachable [ 0.000000] 4 base 0100000000 mask FFE0000000 write-back [ 0.000000] 5 base 0120000000 mask FFF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC [ 0.000000] reg 4, base: 4GB, range: 512MB, type WB [ 0.000000] reg 5, base: 4608MB, range: 256MB, type WB [ 0.000000] total RAM covered: 3326M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5740-0x000f574f] mapped at [ffff8800000f5740] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fda000, 0x01fdafff] PGTABLE [ 0.000000] BRK [0x01fdb000, 0x01fdbfff] PGTABLE [ 0.000000] BRK [0x01fdc000, 0x01fdcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff] [ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M [ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff] [ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff] [ 0.000000] [mem 0x100000000-0x12bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfddffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xcfbfffff] page 2M [ 0.000000] [mem 0xcfc00000-0xcfddffff] page 4k [ 0.000000] RAMDISK: [mem 0x34c48000-0x3661bfff] [ 0.000000] Reserving 128MB of memory at 704MB for crashkernel (System RAM: 4093MB) [ 0.000000] ACPI: RSDP 00000000000f7130 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfde30c0 042A8 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfde0000 00040 [ 0.000000] ACPI: SSDT 00000000cfde7440 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfde7700 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfde7740 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfde7380 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff] [ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff] [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x12fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xcfddffff] [ 0.000000] node 0: [mem 0x100000000-0x12fffffff] [ 0.000000] On node 0 totalpages: 1047934 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13240 pages used for memmap [ 0.000000] DMA32 zone: 847328 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfde0000-0xcfde2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfde3000-0xcfdeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86720 r8192 d23872 u524288 [ 0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031537 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-18-generic root=UUID=edccfd23-3c9e-4e67-bd2d-db904c7dbaee ro crashkernel=384M-2G:64M,2G-:128M quiet splash radeon.modeset=1 vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 9d80000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 3820004K/4191736K available (7513K kernel code, 1080K rwdata, 4076K rodata, 1392K init, 1428K bss, 371732K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-255. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 2618.178 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5236.35 BogoMIPS (lpj=10472712) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004052] Security Framework initialized [ 0.004071] AppArmor: AppArmor initialized [ 0.004073] Yama: becoming mindful. [ 0.004470] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009324] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010259] Mount-cache hash table entries: 256 [ 0.010493] Initializing cgroup subsys memory [ 0.010510] Initializing cgroup subsys devices [ 0.010512] Initializing cgroup subsys freezer [ 0.010514] Initializing cgroup subsys blkio [ 0.010516] Initializing cgroup subsys perf_event [ 0.010519] Initializing cgroup subsys hugetlb [ 0.010540] tseg: 00cfe00000 [ 0.010543] CPU: Physical Processor ID: 0 [ 0.010544] CPU: Processor Core ID: 0 [ 0.010546] mce: CPU supports 5 MCE banks [ 0.010555] LVT offset 0 assigned for vector 0xf9 [ 0.010559] process: using AMD E400 aware idle routine [ 0.010562] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.010562] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.010562] tlb_flushall_shift: 4 [ 0.010655] Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000) [ 0.012211] ACPI: Core revision 20130517 [ 0.014580] ACPI: All ACPI Tables successfully acquired [ 0.016033] ftrace: allocating 31308 entries in 123 pages [ 0.032732] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.075820] smpboot: CPU0: AMD Athlon(tm) Dual Core Processor 5050e (fam: 0f, model: 6b, stepping: 02) [ 0.076000] Performance Events: AMD PMU driver. [ 0.076000] ... version: 0 [ 0.076000] ... bit width: 48 [ 0.076000] ... generic registers: 4 [ 0.076000] ... value mask: 0000ffffffffffff [ 0.076000] ... max period: 00007fffffffffff [ 0.076000] ... fixed-purpose events: 0 [ 0.076000] ... event mask: 000000000000000f [ 0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.076000] smpboot: Booting Node 0, Processors #1 [ 0.164082] Brought up 2 CPUs [ 0.164089] smpboot: Total of 2 processors activated (10472.94 BogoMIPS) [ 0.164650] devtmpfs: initialized [ 0.165755] EVM: security.selinux [ 0.165757] EVM: security.SMACK64 [ 0.165758] EVM: security.capability [ 0.165803] PM: Registering ACPI NVS region [mem 0xcfde0000-0xcfde2fff] (12288 bytes) [ 0.168041] regulator-dummy: no parameters [ 0.168075] RTC time: 7:28:27, date: 03/14/14 [ 0.168129] NET: Registered protocol family 16 [ 0.168294] node 0 link 0: io port [c000, ffff] [ 0.168297] TOM: 00000000d0000000 aka 3328M [ 0.168299] node 0 link 0: mmio [a0000, bffff] [ 0.168302] node 0 link 0: mmio [d0000000, dfffffff] [ 0.168304] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.168306] node 0 link 0: mmio [e0000000, e03fffff] [ 0.168308] TOM2: 0000000130000000 aka 4864M [ 0.168311] bus: [bus 00-03] on node 0 link 0 [ 0.168313] bus: 00 [io 0x0000-0xffff] [ 0.168314] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.168316] bus: 00 [mem 0xd0000000-0xefffffff] [ 0.168317] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.168319] bus: 00 [mem 0x130000000-0xfcffffffff] [ 0.168375] ACPI: bus type PCI registered [ 0.168377] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.168439] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.168442] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.178997] PCI: Using configuration type 1 for base access [ 0.180332] bio: create slab at 0 [ 0.180332] ACPI: Added _OSI(Module Device) [ 0.180332] ACPI: Added _OSI(Processor Device) [ 0.180332] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.180332] ACPI: Added _OSI(Processor Aggregator Device) [ 0.180761] ACPI: EC: Look up EC in DSDT [ 0.185704] ACPI: Interpreter enabled [ 0.185712] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) [ 0.185717] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.185732] ACPI: (supports S0 S3 S4 S5) [ 0.185734] ACPI: Using IOAPIC for interrupt routing [ 0.185808] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.185878] ACPI: No dock devices found. [ 0.227671] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.227679] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.227681] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.227934] PCI host bridge to bus 0000:00 [ 0.227938] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.227940] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.227943] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.227945] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.227947] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.227950] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.227952] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff] [ 0.227961] pci 0000:00:00.0: [1002:7911] type 00 class 0x060000 [ 0.228090] pci 0000:00:02.0: [1002:7913] type 01 class 0x060400 [ 0.228120] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.228179] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.228220] pci 0000:00:06.0: [1002:7916] type 01 class 0x060400 [ 0.228248] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.228305] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.228359] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.228379] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.228390] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.228400] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.228410] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.228420] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.228431] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 0.228560] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.228574] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 0.228684] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.228727] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.228742] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.228852] pci 0000:00:12.1: System wakeup disabled by ACPI [ 0.228896] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.228916] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff] [ 0.229001] pci 0000:00:12.2: supports D1 D2 [ 0.229004] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.229065] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.229108] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.229122] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.229239] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.229275] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.229289] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 0.229403] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.229444] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.229464] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.229549] pci 0000:00:13.2: supports D1 D2 [ 0.229552] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.229619] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.229664] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.229841] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.229858] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.229868] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.229878] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.229888] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.229899] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 0.230032] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.230055] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.230123] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.230187] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.230223] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.230375] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.230467] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.230506] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.230521] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff] [ 0.230628] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.230667] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.230748] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.230826] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.230903] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.231037] pci 0000:01:00.0: [1002:9498] type 00 class 0x030000 [ 0.231050] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.231061] pci 0000:01:00.0: reg 0x18: [mem 0xfdfe0000-0xfdfeffff 64bit] [ 0.231068] pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff] [ 0.231081] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.231110] pci 0000:01:00.0: supports D1 D2 [ 0.231153] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300 [ 0.231166] pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit] [ 0.231221] pci 0000:01:00.1: supports D1 D2 [ 0.236015] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.236019] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.236022] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.236026] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.236075] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.236088] pci 0000:02:00.0: reg 0x10: [io 0xde00-0xdeff] [ 0.236109] pci 0000:02:00.0: reg 0x18: [mem 0xfdbff000-0xfdbfffff 64bit pref] [ 0.236123] pci 0000:02:00.0: reg 0x20: [mem 0xfdbe0000-0xfdbeffff 64bit pref] [ 0.236133] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.236181] pci 0000:02:00.0: supports D1 D2 [ 0.236183] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.244011] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.244015] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.244018] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.244021] pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.244101] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.244106] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.244110] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.244115] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 0.244118] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.244120] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.244122] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.244125] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.244127] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.244129] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) [ 0.260067] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.260127] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.260183] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.260240] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.260297] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.260353] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.260410] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.260466] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.260997] ACPI: \_SB_.PCI0: notify handler is installed [ 0.261031] Found 1 acpi root devices [ 0.261139] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.261139] vgaarb: loaded [ 0.261139] vgaarb: bridge control possible 0000:01:00.0 [ 0.261139] SCSI subsystem initialized [ 0.261139] ACPI: bus type ATA registered [ 0.261139] libata version 3.00 loaded. [ 0.261139] ACPI: bus type USB registered [ 0.261139] usbcore: registered new interface driver usbfs [ 0.261139] usbcore: registered new interface driver hub [ 0.261139] usbcore: registered new device driver usb [ 0.261139] PCI: Using ACPI for IRQ routing [ 0.270554] PCI: pci_cache_line_size set to 64 bytes [ 0.270615] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.270618] e820: reserve RAM buffer [mem 0xcfde0000-0xcfffffff] [ 0.270734] NetLabel: Initializing [ 0.270736] NetLabel: domain hash size = 128 [ 0.270737] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.270749] NetLabel: unlabeled traffic allowed by default [ 0.270766] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.270766] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.274073] Switched to clocksource hpet [ 0.278873] AppArmor: AppArmor Filesystem Enabled [ 0.278917] pnp: PnP ACPI init [ 0.278935] ACPI: bus type PNP registered [ 0.279059] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.279062] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.279065] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.279069] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.292153] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.292162] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.292214] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.292217] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.292219] system 00:01: [io 0x0238-0x023f] has been reserved [ 0.292222] system 00:01: [io 0x040b] has been reserved [ 0.292224] system 00:01: [io 0x04d6] has been reserved [ 0.292227] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.292229] system 00:01: [io 0x0c14] has been reserved [ 0.292232] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.292235] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.292237] system 00:01: [io 0x0c6f] has been reserved [ 0.292240] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.292242] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.292245] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.292248] system 00:01: [io 0x4000-0x40fe] could not be reserved [ 0.292250] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.292253] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.292255] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.292258] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.292264] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.292268] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.292382] pnp 00:02: [dma 4] [ 0.292405] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.292473] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.292523] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.292553] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.292592] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.292943] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.293274] pnp 00:08: [dma 3] [ 0.293323] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.293392] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.293459] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.293463] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293656] system 00:0b: [mem 0x000d1a00-0x000d3fff] has been reserved [ 0.293659] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.293662] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.293664] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.293667] system 00:0b: [mem 0xcfde0000-0xcfdfffff] could not be reserved [ 0.293670] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.293673] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.293676] system 00:0b: [mem 0x00100000-0xcfddffff] could not be reserved [ 0.293679] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.293682] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.293684] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.293687] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.293706] pnp: PnP ACPI: found 12 devices [ 0.293708] ACPI: bus type PNP unregistered [ 0.300923] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref] [ 0.300932] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.300934] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.300937] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.300940] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.300945] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref] [ 0.300947] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.300950] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.300953] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.300955] pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.300959] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.300962] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.300968] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.300972] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 0.300990] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.300993] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.300995] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.300998] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.301000] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.301003] pci_bus 0000:00: resource 9 [mem 0xcff00000-0xfebfffff] [ 0.301006] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.301008] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.301010] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.301013] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.301015] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.301018] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.301020] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.301022] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.301025] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref] [ 0.301027] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.301030] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.301032] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.301035] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.301037] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.301040] pci_bus 0000:03: resource 9 [mem 0xcff00000-0xfebfffff] [ 0.301093] NET: Registered protocol family 2 [ 0.301305] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.301543] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.301779] TCP: Hash tables configured (established 32768 bind 32768) [ 0.301842] TCP: reno registered [ 0.301858] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.301893] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.302021] NET: Registered protocol family 1 [ 1.184022] pci 0000:00:12.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184 [ 1.492171] pci 0000:01:00.0: Boot video device [ 1.492182] PCI: CLS 4 bytes, default 64 [ 1.492246] Trying to unpack rootfs image as initramfs... [ 1.983710] Freeing initrd memory: 26448K (ffff880034c48000 - ffff88003661c000) [ 1.983997] PCI-DMA: Disabling AGP. [ 1.984094] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.984095] PCI-DMA: using GART IOMMU. [ 1.984099] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.987722] Scanning for low memory corruption every 60 seconds [ 1.987764] Corrupted low memory at ffff88000000fff8 (fff8 phys) = 380000a390 [ 1.987766] ------------[ cut here ]------------ [ 1.987773] WARNING: CPU: 0 PID: 36 at /build/buildd/linux-lts-saucy-3.11.0/arch/x86/kernel/check.c:140 check_for_bios_corruption+0x10e/0x120() [ 1.987774] Memory corruption detected in low memory [ 1.987776] Modules linked in: [ 1.987780] CPU: 0 PID: 36 Comm: kworker/0:1 Not tainted 3.11.0-18-generic #32~precise1-Ubuntu [ 1.987782] Hardware name: Gigabyte Technology Co., Ltd. GA-MA74GM-S2H/GA-MA74GM-S2H, BIOS FB 03/03/2009 [ 1.987785] Workqueue: events check_corruption [ 1.987787] 000000000000008c ffff880129659ce8 ffffffff8173d60f 0000000000000d09 [ 1.987790] ffff880129659d38 ffff880129659d28 ffffffff8106540c ffff880129659d08 [ 1.987793] 0000000000000000 ffff880000010000 ffffffff81eae390 0000000000000001 [ 1.987796] Call Trace: [ 1.987803] [] dump_stack+0x46/0x58 [ 1.987807] [] warn_slowpath_common+0x8c/0xc0 [ 1.987809] [] warn_slowpath_fmt+0x46/0x50 [ 1.987812] [] check_for_bios_corruption+0x10e/0x120 [ 1.987814] [] check_corruption+0xe/0x40 [ 1.987819] [] process_one_work+0x170/0x4a0 [ 1.987822] [] worker_thread+0x121/0x390 [ 1.987824] [] ? manage_workers.isra.21+0x170/0x170 [ 1.987828] [] kthread+0xc0/0xd0 [ 1.987831] [] ? flush_kthread_worker+0xb0/0xb0 [ 1.987836] [] ret_from_fork+0x7c/0xb0 [ 1.987838] [] ? flush_kthread_worker+0xb0/0xb0 [ 1.987847] ---[ end trace 4239d262e285305a ]--- [ 1.988123] Initialise module verification [ 1.988168] audit: initializing netlink socket (disabled) [ 1.988184] type=2000 audit(1394782107.984:1): initialized [ 2.016368] bounce pool size: 64 pages [ 2.016388] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.018076] zbud: loaded [ 2.018238] VFS: Disk quotas dquot_6.5.2 [ 2.018294] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.018987] fuse init (API version 7.22) [ 2.019101] msgmni has been set to 7641 [ 2.019753] Key type asymmetric registered [ 2.019757] Asymmetric key parser 'x509' registered [ 2.019802] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.019847] io scheduler noop registered [ 2.019849] io scheduler deadline registered (default) [ 2.019879] io scheduler cfq registered [ 2.020040] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 2.020113] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 2.020178] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.020195] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.020348] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.020354] ACPI: Power Button [PWRB] [ 2.020399] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.020402] ACPI: Power Button [PWRF] [ 2.020519] GHES: HEST is not enabled! [ 2.020605] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.041117] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.042915] Linux agpgart interface v0.103 [ 2.044523] brd: module loaded [ 2.045317] loop: module loaded [ 2.045391] megasas: 06.600.18.00-rc1 Wed. May. 15 17:00:00 PDT 2013 [ 2.045813] libphy: Fixed MDIO Bus: probed [ 2.045910] tun: Universal TUN/TAP device driver, 1.6 [ 2.045912] tun: (C) 1999-2004 Max Krasnyansky [ 2.045962] PPP generic driver version 2.4.2 [ 2.046020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.046022] ehci-pci: EHCI PCI platform driver [ 2.046193] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.046203] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.046213] QUIRK: Enable AMD PLL fix [ 2.046215] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.046218] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 2.046233] ehci-pci 0000:00:12.2: debug port 1 [ 2.046291] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 2.056020] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.056047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.056050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.056052] usb usb1: Product: EHCI Host Controller [ 2.056054] usb usb1: Manufacturer: Linux 3.11.0-18-generic ehci_hcd [ 2.056056] usb usb1: SerialNumber: 0000:00:12.2 [ 2.056194] hub 1-0:1.0: USB hub found [ 2.056199] hub 1-0:1.0: 6 ports detected [ 2.056460] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.056467] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.056472] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.056474] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 2.056488] ehci-pci 0000:00:13.2: debug port 1 [ 2.056532] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000 [ 2.068021] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.068038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.068040] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.068043] usb usb2: Product: EHCI Host Controller [ 2.068045] usb usb2: Manufacturer: Linux 3.11.0-18-generic ehci_hcd [ 2.068047] usb usb2: SerialNumber: 0000:00:13.2 [ 2.068146] hub 2-0:1.0: USB hub found [ 2.068150] hub 2-0:1.0: 6 ports detected [ 2.068288] ehci-platform: EHCI generic platform driver [ 2.068297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.068298] ohci-pci: OHCI PCI platform driver [ 2.068416] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.068423] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 2.068459] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 2.128022] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.128025] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.128027] usb usb3: Product: OHCI PCI host controller [ 2.128029] usb usb3: Manufacturer: Linux 3.11.0-18-generic ohci_hcd [ 2.128032] usb usb3: SerialNumber: 0000:00:12.0 [ 2.128135] hub 3-0:1.0: USB hub found [ 2.128142] hub 3-0:1.0: 3 ports detected [ 2.128347] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 2.128353] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.128369] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 2.188020] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.188023] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.188025] usb usb4: Product: OHCI PCI host controller [ 2.188027] usb usb4: Manufacturer: Linux 3.11.0-18-generic ohci_hcd [ 2.188030] usb usb4: SerialNumber: 0000:00:12.1 [ 2.188125] hub 4-0:1.0: USB hub found [ 2.188133] hub 4-0:1.0: 3 ports detected [ 2.188332] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.188339] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.188371] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 2.248019] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.248021] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.248024] usb usb5: Product: OHCI PCI host controller [ 2.248026] usb usb5: Manufacturer: Linux 3.11.0-18-generic ohci_hcd [ 2.248028] usb usb5: SerialNumber: 0000:00:13.0 [ 2.248120] hub 5-0:1.0: USB hub found [ 2.248127] hub 5-0:1.0: 3 ports detected [ 2.248333] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.248340] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.248356] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 2.308033] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.308035] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.308038] usb usb6: Product: OHCI PCI host controller [ 2.308040] usb usb6: Manufacturer: Linux 3.11.0-18-generic ohci_hcd [ 2.308042] usb usb6: SerialNumber: 0000:00:13.1 [ 2.308152] hub 6-0:1.0: USB hub found [ 2.308159] hub 6-0:1.0: 3 ports detected [ 2.308363] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.308371] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.308391] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000 [ 2.368022] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.368025] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.368027] usb usb7: Product: OHCI PCI host controller [ 2.368029] usb usb7: Manufacturer: Linux 3.11.0-18-generic ohci_hcd [ 2.368031] usb usb7: SerialNumber: 0000:00:14.5 [ 2.368133] hub 7-0:1.0: USB hub found [ 2.368140] hub 7-0:1.0: 2 ports detected [ 2.368232] ohci-platform: OHCI generic platform driver [ 2.368241] uhci_hcd: USB Universal Host Controller Interface driver [ 2.368312] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.368314] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.368469] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.368612] mousedev: PS/2 mouse device common for all mice [ 2.368774] rtc_cmos 00:04: RTC can wake from S4 [ 2.368904] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.368943] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.369019] device-mapper: uevent: version 1.0.3 [ 2.369099] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 2.369163] cpuidle: using governor ladder [ 2.369165] cpuidle: using governor menu [ 2.369177] ledtrig-cpu: registered to indicate activity on CPUs [ 2.369264] TCP: cubic registered [ 2.369371] NET: Registered protocol family 10 [ 2.369591] NET: Registered protocol family 17 [ 2.369601] Key type dns_resolver registered [ 2.369879] PM: Hibernation image not present or could not be loaded. [ 2.369883] Loading module verification certificates [ 2.370849] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5465b24ef2efe2a79ebe0734c1d73e5f3e117661' [ 2.370865] registered taskstats version 1 [ 2.373835] Key type trusted registered [ 2.376472] Key type encrypted registered [ 2.379025] AppArmor: AppArmor sha1 policy hashing enabled [ 2.379332] Magic number: 6:698:470 [ 2.379443] rtc_cmos 00:04: setting system clock to 2014-03-14 07:28:29 UTC (1394782109) [ 2.379615] powernow-k8: fid 0x12 (2600 MHz), vid 0xe [ 2.379617] powernow-k8: fid 0x10 (2400 MHz), vid 0x10 [ 2.379619] powernow-k8: fid 0xe (2200 MHz), vid 0x12 [ 2.379620] powernow-k8: fid 0xc (2000 MHz), vid 0x14 [ 2.379621] powernow-k8: fid 0xa (1800 MHz), vid 0x16 [ 2.379623] powernow-k8: fid 0x2 (1000 MHz), vid 0x1a [ 2.379650] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 5050e (2 cpu cores) (version 2.20.00) [ 2.379655] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.379656] EDD information not available. [ 2.381501] Freeing unused kernel memory: 1392K (ffffffff81d10000 - ffffffff81e6c000) [ 2.381506] Write protecting the kernel read-only data: 12288k [ 2.383501] Freeing unused kernel memory: 668K (ffff880001759000 - ffff880001800000) [ 2.383581] Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000) [ 2.387549] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.407368] udevd[107]: starting version 175 [ 2.424053] usb 1-4: new high-speed USB device number 3 using ehci-pci [ 2.479614] ahci 0000:00:11.0: version 3.0 [ 2.479906] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.479911] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.486323] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.486342] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.486559] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 2.486750] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000620000, 00:24:1d:29:fe:3a, XID 1c4000c0 IRQ 42 [ 2.486753] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 2.486823] scsi0 : ahci [ 2.488065] scsi1 : ahci [ 2.489273] scsi2 : ahci [ 2.492059] scsi3 : ahci [ 2.493576] scsi4 : ahci [ 2.496057] scsi5 : ahci [ 2.496188] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 2.496191] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 2.496195] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 2.496198] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 2.496201] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 2.496204] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 2.497621] [drm] Initialized drm 1.1.0 20060810 [ 2.524205] scsi6 : pata_atiixp [ 2.524948] scsi7 : pata_atiixp [ 2.525308] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 2.525311] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 2.549350] [drm] radeon kernel modesetting enabled. [ 2.549701] [drm] initializing kernel modesetting (RV730 0x1002:0x9498 0x1458:0x21C5). [ 2.549721] [drm] register mmio base: 0xFDFE0000 [ 2.549722] [drm] register mmio size: 65536 [ 2.550053] ATOM BIOS: [ 2.550090] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 2.550093] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 2.550095] [drm] Detected VRAM RAM=1024M, BAR=256M [ 2.550097] [drm] RAM width 128bits DDR [ 2.550274] [TTM] Zone kernel: Available graphics memory: 1957256 kiB [ 2.550276] [TTM] Initializing pool allocator [ 2.550281] [TTM] Initializing DMA pool allocator [ 2.550308] [drm] radeon: 1024M of VRAM memory ready [ 2.550310] [drm] radeon: 512M of GTT memory ready. [ 2.550553] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.567086] [drm] Loading RV730 Microcode [ 2.567974] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000). [ 2.568069] radeon 0000:01:00.0: WB enabled [ 2.568073] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880123db4c00 [ 2.568075] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880123db4c0c [ 2.569040] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9001089c598 [ 2.569043] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.569044] [drm] Driver supports precise vblank timestamp query. [ 2.569071] radeon 0000:01:00.0: irq 43 for MSI/MSI-X [ 2.569087] radeon 0000:01:00.0: radeon: using MSI. [ 2.569114] [drm] radeon: irq initialized. [ 2.573315] usb 1-4: New USB device found, idVendor=050d, idProduct=935a [ 2.573320] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.573323] usb 1-4: Product: 802.11 n WLAN [ 2.573325] usb 1-4: Manufacturer: Ralink [ 2.573327] usb 1-4: SerialNumber: 1.0 [ 2.614992] [drm] ring test on 0 succeeded in 1 usecs [ 2.615050] [drm] ring test on 3 succeeded in 1 usecs [ 2.809653] [drm] ring test on 5 succeeded in 1 usecs [ 2.809657] [drm] UVD initialized successfully. [ 2.809785] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.809805] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.820040] ata2: SATA link down (SStatus 0 SControl 300) [ 2.820083] ata1: SATA link down (SStatus 0 SControl 300) [ 2.836026] usb 3-2: new low-speed USB device number 2 using ohci-pci [ 2.840056] ata6: SATA link down (SStatus 0 SControl 300) [ 2.840087] ata5: SATA link down (SStatus 0 SControl 300) [ 2.976037] [drm] ib test on ring 5 succeeded [ 2.976361] [drm] Radeon Display Connectors [ 2.976363] [drm] Connector 0: [ 2.976365] [drm] HDMI-A-1 [ 2.976366] [drm] HPD2 [ 2.976368] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [ 2.976370] [drm] Encoders: [ 2.976371] [drm] DFP2: INTERNAL_UNIPHY1 [ 2.976372] [drm] Connector 1: [ 2.976374] [drm] VGA-1 [ 2.976376] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 2.976377] [drm] Encoders: [ 2.976378] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.976380] [drm] Connector 2: [ 2.976381] [drm] DVI-I-1 [ 2.976382] [drm] HPD1 [ 2.976384] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [ 2.976385] [drm] Encoders: [ 2.976387] [drm] DFP1: INTERNAL_UNIPHY [ 2.976388] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 2.976412] [drm] Internal thermal controller with fan control [ 2.976451] [drm] radeon: power management initialized [ 2.996022] ata3: softreset failed (device not ready) [ 2.996026] ata3: applying PMP SRST workaround and retrying [ 3.001331] usb 3-2: New USB device found, idVendor=15d9, idProduct=0a4d [ 3.001334] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.001336] usb 3-2: Product: USB OPTICAL MOUSE [ 3.008532] hidraw: raw HID events driver (C) Jiri Kosina [ 3.014537] usbcore: registered new interface driver usbhid [ 3.014541] usbhid: USB HID core driver [ 3.016045] ata4: softreset failed (device not ready) [ 3.016052] ata4: applying PMP SRST workaround and retrying [ 3.018730] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3 [ 3.018971] hid-generic 0003:15D9:0A4D.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-2/input0 [ 3.023385] [drm] fb mappable at 0xD035F000 [ 3.023387] [drm] vram apper at 0xD0000000 [ 3.023388] [drm] size 8294400 [ 3.023389] [drm] fb depth is 24 [ 3.023391] [drm] pitch is 7680 [ 3.023464] fbcon: radeondrmfb (fb0) is primary device [ 3.168037] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.175935] ata3.00: ATA-8: WDC WD2500AAKS-00F0A0, 12.01B02, max UDMA/133 [ 3.175937] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.176943] ata3.00: configured for UDMA/133 [ 3.177131] scsi 2:0:0:0: Direct-Access ATA WDC WD2500AAKS-0 12.0 PQ: 0 ANSI: 5 [ 3.177449] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.177508] sd 2:0:0:0: [sda] Write Protect is off [ 3.177511] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.177534] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.177789] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.182663] sda: sda1 sda2 sda3 sda4 [ 3.183077] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.188075] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.194007] ata4.00: HPA detected: current 488395055, native 488397168 [ 3.194088] ata4.00: ATA-8: WDC WD2500AAKS-00F0A0, 12.01B02, max UDMA/133 [ 3.194090] ata4.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.195107] ata4.00: configured for UDMA/133 [ 3.195258] scsi 3:0:0:0: Direct-Access ATA WDC WD2500AAKS-0 12.0 PQ: 0 ANSI: 5 [ 3.195437] sd 3:0:0:0: [sdb] 488395055 512-byte logical blocks: (250 GB/232 GiB) [ 3.195467] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 3.195495] sd 3:0:0:0: [sdb] Write Protect is off [ 3.195498] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.195523] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.201131] sdb: sdb1 sdb2 sdb3 sdb4 [ 3.201541] sd 3:0:0:0: [sdb] Attached SCSI disk [ 3.220742] Console: switching to colour frame buffer device 240x67 [ 3.228045] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 3.228047] radeon 0000:01:00.0: registered panic notifier [ 3.228054] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0 [ 3.276044] md: bind [ 3.330919] md: bind [ 3.333574] md: bind [ 3.335951] md: bind [ 3.340112] md: raid0 personality registered for level 0 [ 3.340351] md/raid0:md2: md_size is 335565312 sectors. [ 3.340354] md: RAID0 configuration for md2 - 1 zone [ 3.340355] md: zone0=[sdb3/sda3] [ 3.340360] zone-offset= 0KB, device-offset= 0KB, size= 167782656KB [ 3.340361] [ 3.340371] md2: detected capacity change from 0 to 171809439744 [ 3.342693] md: bind [ 3.345052] md: bind [ 3.347069] md/raid0:md1: md_size is 16803584 sectors. [ 3.347074] md: RAID0 configuration for md1 - 1 zone [ 3.347076] md: zone0=[sdb1/sda1] [ 3.347080] zone-offset= 0KB, device-offset= 0KB, size= 8401792KB [ 3.347081] [ 3.347093] md1: detected capacity change from 0 to 8603435008 [ 3.349139] md1: unknown partition table [ 3.363766] md2: unknown partition table [ 3.371282] md: bind [ 3.375980] md: raid1 personality registered for level 1 [ 3.376365] md/raid1:md0: active with 2 out of 2 mirrors [ 3.376395] md0: detected capacity change from 0 to 1085669376 [ 3.378238] md: bind [ 3.380095] md0: unknown partition table [ 3.381097] md/raid1:md3: active with 2 out of 2 mirrors [ 3.381123] md3: detected capacity change from 0 to 158764236800 [ 3.383478] md3: unknown partition table [ 4.326263] md: linear personality registered for level -1 [ 4.329770] md: multipath personality registered for level -4 [ 4.336174] async_tx: api initialized (async) [ 4.404026] raid6: sse2x1 3602 MB/s [ 4.472019] raid6: sse2x2 4889 MB/s [ 4.540017] raid6: sse2x4 4958 MB/s [ 4.540019] raid6: using algorithm sse2x4 (4958 MB/s) [ 4.540021] raid6: using intx1 recovery algorithm [ 4.543517] xor: measuring software checksum speed [ 4.580010] prefetch64-sse: 7781.000 MB/sec [ 4.620010] generic_sse: 7798.000 MB/sec [ 4.620012] xor: using function: generic_sse (7798.000 MB/sec) [ 4.624830] md: raid6 personality registered for level 6 [ 4.624834] md: raid5 personality registered for level 5 [ 4.624836] md: raid4 personality registered for level 4 [ 4.632412] md: raid10 personality registered for level 10 [ 4.721314] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null) [ 6.361853] init: ureadahead main process (384) terminated with status 5 [ 6.983453] Adding 8401788k swap on /dev/md1. Priority:-1 extents:1 across:8401788k FS [ 7.000116] EXT4-fs (md2): warning: maximal mount count reached, running e2fsck is recommended [ 7.029437] EXT4-fs (md2): re-mounted. Opts: (null) [ 7.287221] kjournald starting. Commit interval 5 seconds [ 7.287249] EXT3-fs (md0): warning: maximal mount count reached, running e2fsck is recommended [ 7.369182] EXT3-fs (md0): using internal journal [ 7.369189] EXT3-fs (md0): mounted filesystem with ordered data mode [ 7.590059] kjournald starting. Commit interval 5 seconds [ 7.590120] EXT3-fs (md3): warning: maximal mount count reached, running e2fsck is recommended [ 7.704131] EXT3-fs (md3): using internal journal [ 7.704138] EXT3-fs (md3): mounted filesystem with ordered data mode [ 20.161219] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.547794] udevd[846]: starting version 175 [ 21.050482] it87: Found IT8718F chip at 0x228, revision 5 [ 21.050507] it87: Beeping is supported [ 21.138567] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 22.071771] MCE: In-kernel MCE decoding enabled. [ 22.087522] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 22.087615] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 22.101261] parport_pc 00:08: reported by Plug and Play ACPI [ 22.101343] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 22.154174] EDAC MC: Ver: 3.0.0 [ 22.191794] AMD64 EDAC driver v3.4.0 [ 22.191899] EDAC amd64: DRAM ECC disabled. [ 22.191915] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 22.191915] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 22.191915] (Note that use of the override may cause unknown side effects.) [ 22.220657] ppdev: user-space parallel port driver [ 22.341009] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 22.341086] sp5100_tco: PCI Revision ID: 0x3a [ 22.341106] sp5100_tco: failed to find MMIO address, giving up. [ 22.355802] lp0: using parport0 (interrupt-driven). [ 22.386267] cfg80211: Calling CRDA to update world regulatory domain [ 22.690822] device-mapper: multipath: version 1.6.0 loaded [ 22.911599] init: Failed to spawn smbd main process: unable to execute: No such file or directory [ 23.198285] cfg80211: World regulatory domain updated: [ 23.198292] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.198294] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.198297] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.198298] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.198300] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.198302] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.259505] Bluetooth: Core ver 2.16 [ 23.259541] NET: Registered protocol family 31 [ 23.259543] Bluetooth: HCI device and connection manager initialized [ 23.259554] Bluetooth: HCI socket layer initialized [ 23.259557] Bluetooth: L2CAP socket layer initialized [ 23.259563] Bluetooth: SCO socket layer initialized [ 23.440036] Bluetooth: RFCOMM TTY layer initialized [ 23.440052] Bluetooth: RFCOMM socket layer initialized [ 23.440054] Bluetooth: RFCOMM ver 1.11 [ 23.472908] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.472913] Bluetooth: BNEP filters: protocol multicast [ 23.472924] Bluetooth: BNEP socket layer initialized [ 23.504038] usb 1-4: reset high-speed USB device number 3 using ehci-pci [ 23.625334] hda-intel 0000:00:14.2: Using LPIB position fix [ 23.629395] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 23.635541] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 23.635543] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 23.635545] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 23.635546] mono: mono_out=0x0 [ 23.635548] dig-out=0x1e/0x0 [ 23.635549] inputs: [ 23.635551] Front Mic=0x19 [ 23.635553] Rear Mic=0x18 [ 23.635554] Line=0x1a [ 23.646872] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 23.650659] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 23.650764] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 23.650888] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 23.650994] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 23.651096] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 23.651628] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 23.651631] hda-intel 0000:01:00.1: Using LPIB position fix [ 23.651680] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X [ 23.654027] hda-intel 0000:01:00.1: Enable sync_write for stable communication [ 23.676424] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 23.706913] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9 [ 23.785212] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 23.785682] usbcore: registered new interface driver rt2800usb [ 23.882031] init: failsafe main process (1089) killed by TERM signal [ 26.124715] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 26.125233] zram: Created 2 device(s) ... [ 26.149527] init: gdm main process (1505) killed by TERM signal [ 26.293320] r8169 0000:02:00.0 eth0: link down [ 26.293361] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.293710] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.295505] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 26.335780] Adding 978624k swap on /dev/zram0. Priority:5 extents:1 across:978624k SSFS [ 26.341602] Adding 978624k swap on /dev/zram1. Priority:5 extents:1 across:978624k SSFS [ 26.573326] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 26.581849] kvm: Nested Virtualization enabled [ 27.015014] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.015413] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.254354] init: isc-dhcp-server main process (1569) terminated with status 1 [ 27.254395] init: isc-dhcp-server main process ended, respawning [ 27.404377] init: isc-dhcp-server main process (1580) terminated with status 1 [ 27.404420] init: isc-dhcp-server main process ended, respawning [ 27.586306] init: isc-dhcp-server main process (1588) terminated with status 1 [ 27.586347] init: isc-dhcp-server main process ended, respawning [ 27.734474] init: isc-dhcp-server main process (1619) terminated with status 1 [ 27.734510] init: isc-dhcp-server main process ended, respawning [ 27.903992] init: isc-dhcp-server main process (1631) terminated with status 1 [ 27.904086] init: isc-dhcp-server main process ended, respawning [ 28.035317] init: isc-dhcp-server main process (1650) terminated with status 1 [ 28.035357] init: isc-dhcp-server main process ended, respawning [ 28.178963] init: isc-dhcp-server main process (1657) terminated with status 1 [ 28.178998] init: isc-dhcp-server main process ended, respawning [ 28.320723] init: isc-dhcp-server main process (1664) terminated with status 1 [ 28.320767] init: isc-dhcp-server main process ended, respawning [ 28.434551] init: isc-dhcp-server main process (1697) terminated with status 1 [ 28.434591] init: isc-dhcp-server main process ended, respawning [ 28.559343] init: isc-dhcp-server main process (1724) terminated with status 1 [ 28.559388] init: isc-dhcp-server main process ended, respawning [ 28.670455] init: isc-dhcp-server main process (1758) terminated with status 1 [ 28.670499] init: isc-dhcp-server respawning too fast, stopped [ 29.287230] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.380955] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 29.711756] cgroup: libvirtd (1671) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 29.711768] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 30.751509] wlan0: authenticate with 00:fe:f4:57:b9:e8 [ 30.821571] wlan0: send auth to 00:fe:f4:57:b9:e8 (try 1/3) [ 30.826044] wlan0: authenticated [ 30.826442] rt2800usb 1-4:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 30.828080] wlan0: associate with 00:fe:f4:57:b9:e8 (try 1/3) [ 30.831923] wlan0: RX AssocResp from 00:fe:f4:57:b9:e8 (capab=0x431 status=0 aid=3) [ 30.839275] wlan0: associated [ 30.839352] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 33.234025] init: Failed to spawn nmbd main process: unable to execute: No such file or directory [ 36.680000] postgres (2280): /proc/2280/oom_adj is deprecated, please use /proc/2280/oom_score_adj instead. [ 49.402752] init: plymouth-stop pre-start process (3495) terminated with status 1 [11133.364361] wlan0: deauthenticated from 00:fe:f4:57:b9:e8 (Reason: 6) [11133.441320] cfg80211: Calling CRDA to update world regulatory domain [11133.547910] cfg80211: World regulatory domain updated: [11133.547924] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [11133.547930] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11133.547935] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [11133.547940] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [11133.547944] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11133.547949] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11134.865612] wlan0: authenticate with 00:fe:f4:57:b9:e8 [11134.902811] wlan0: send auth to 00:fe:f4:57:b9:e8 (try 1/3) [11134.907667] wlan0: authenticated [11134.908732] rt2800usb 1-4:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use [11134.912183] wlan0: associate with 00:fe:f4:57:b9:e8 (try 1/3) [11134.914556] wlan0: RX AssocResp from 00:fe:f4:57:b9:e8 (capab=0x431 status=0 aid=3) [11134.926281] wlan0: associated [13293.132123] wlan0: deauthenticated from 00:fe:f4:57:b9:e8 (Reason: 6) [13293.189360] cfg80211: Calling CRDA to update world regulatory domain [13293.219823] cfg80211: World regulatory domain updated: [13293.219831] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [13293.219834] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13293.219837] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [13293.219839] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [13293.219842] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13293.219844] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13294.640755] wlan0: authenticate with 00:fe:f4:57:b9:e8 [13294.683725] wlan0: send auth to 00:fe:f4:57:b9:e8 (try 1/3) [13294.686196] wlan0: authenticated [13294.686401] rt2800usb 1-4:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use [13294.688060] wlan0: associate with 00:fe:f4:57:b9:e8 (try 1/3) [13294.690679] wlan0: RX AssocResp from 00:fe:f4:57:b9:e8 (capab=0x431 status=0 aid=3) [13294.698259] wlan0: associated [16580.800578] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [19679.441048] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2 [19679.441081] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2 [19679.441091] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2 [19679.458519] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping [22653.324159] wlan0: deauthenticated from 00:fe:f4:57:b9:e8 (Reason: 6) [22653.365479] cfg80211: Calling CRDA to update world regulatory domain [22653.680041] cfg80211: World regulatory domain updated: [22653.680048] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [22653.680051] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22653.680053] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [22653.680055] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [22653.680057] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22653.680059] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [22654.813359] wlan0: authenticate with 00:fe:f4:57:b9:e8 [22654.854821] wlan0: send auth to 00:fe:f4:57:b9:e8 (try 1/3) [22654.856724] wlan0: authenticated [22654.856978] rt2800usb 1-4:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use [22654.860075] wlan0: associate with 00:fe:f4:57:b9:e8 (try 1/3) [22654.862456] wlan0: RX AssocResp from 00:fe:f4:57:b9:e8 (capab=0x431 status=0 aid=3) [22654.869491] wlan0: associated [31413.520144] wlan0: deauthenticated from 00:fe:f4:57:b9:e8 (Reason: 6) [31413.557696] cfg80211: Calling CRDA to update world regulatory domain [31413.568973] cfg80211: World regulatory domain updated: [31413.568984] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [31413.568991] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31413.568996] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31413.569001] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31413.569006] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31413.569010] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31415.033335] wlan0: authenticate with 00:fe:f4:57:b9:e8 [31415.069710] wlan0: send auth to 00:fe:f4:57:b9:e8 (try 1/3) [31415.071648] wlan0: authenticated [31415.072190] rt2800usb 1-4:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use [31415.076058] wlan0: associate with 00:fe:f4:57:b9:e8 (try 1/3) [31415.078549] wlan0: RX AssocResp from 00:fe:f4:57:b9:e8 (capab=0x431 status=0 aid=3) [31415.085949] wlan0: associated