[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-92-generic (buildd@lgw01-59) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #139-Ubuntu SMP Tue Jun 28 20:42:32 UTC 2016 (Ubuntu 3.13.0-92.139-generic 3.13.11-ckt39) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fe73fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fe74000-0x000000007fe75fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fe76000-0x000000007fe96fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007fe97000-0x000000007fefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Dell Computer Corporation Dimension 2400 /0F5949, BIOS A05 12/02/2003 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7fe74 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC [ 0.000000] total RAM covered: 2047M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC [ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [c00fe710] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01ba4000, 0x01ba4fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35c14000-0x36e01fff] [ 0.000000] ACPI: RSDP 000feb80 000014 (v00 DELL ) [ 0.000000] ACPI: RSDT 000fd22a 000034 (v01 DELL 2400 00000007 ASL 00000061) [ 0.000000] ACPI: FACP 000fd25e 000074 (v01 DELL 2400 00000007 ASL 00000061) [ 0.000000] ACPI: DSDT fffcc0f1 002404 (v01 DELL dt_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 7fe74000 000040 [ 0.000000] ACPI: SSDT fffce6ec 000096 (v01 DELL st_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: APIC 000fd2d2 00006C (v01 DELL 2400 00000007 ASL 00000061) [ 0.000000] ACPI: BOOT 000fd33e 000028 (v01 DELL 2400 00000007 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1154MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01ba5000, 0x01ba5fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x7fe73fff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x7fe73fff] [ 0.000000] On node 0 totalpages: 523795 [ 0.000000] free_area_init_node: node 0, pgdat c19a98c0, node_mem_map f4c14020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2309 pages used for memmap [ 0.000000] HighMem zone: 295542 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x7ff00000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bba000 s35520 r0 d21824 u57344 [ 0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522011 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-92-generic root=UUID=05bf9570-4331-4a64-b557-9e6f0afe17b3 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4191128 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007fe74) [ 0.000000] Memory: 2043264K/2095180K available (6579K kernel code, 645K rwdata, 2776K rodata, 884K init, 924K bss, 51916K reserved, 1182168K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) .init : 0xc19c7000 - 0xc1aa4000 ( 884 kB) .data : 0xc166d1ca - 0xc19c6780 (3429 kB) .text : 0xc1000000 - 0xc166d1ca (6580 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2657.794 MHz processor [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5315.58 BogoMIPS (lpj=10631176) [ 0.004011] pid_max: default: 32768 minimum: 301 [ 0.004071] Security Framework initialized [ 0.004110] AppArmor: AppArmor initialized [ 0.004114] Yama: becoming mindful. [ 0.004207] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004212] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004605] Initializing cgroup subsys memory [ 0.004621] Initializing cgroup subsys devices [ 0.004625] Initializing cgroup subsys freezer [ 0.004629] Initializing cgroup subsys blkio [ 0.004632] Initializing cgroup subsys perf_event [ 0.004637] Initializing cgroup subsys hugetlb [ 0.004685] CPU0: Hyper-Threading is disabled [ 0.004691] mce: CPU supports 4 MCE banks [ 0.004705] CPU0: Thermal monitoring enabled (TM1) [ 0.004731] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64 tlb_flushall_shift: 6 [ 0.031133] ACPI: Core revision 20131115 [ 0.053870] ACPI: All ACPI Tables successfully acquired [ 0.054195] ftrace: allocating 27907 entries in 55 pages [ 0.064232] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.064597] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.105875] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz (fam: 0f, model: 02, stepping: 09) [ 0.108000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.108000] ... version: 0 [ 0.108000] ... bit width: 40 [ 0.108000] ... generic registers: 18 [ 0.108000] ... value mask: 000000ffffffffff [ 0.108000] ... max period: 0000007fffffffff [ 0.108000] ... fixed-purpose events: 0 [ 0.108000] ... event mask: 000000000003ffff [ 0.108000] x86: Booted up 1 node, 1 CPUs [ 0.108000] smpboot: Total of 1 processors activated (5315.58 BogoMIPS) [ 0.108000] devtmpfs: initialized [ 0.108000] EVM: security.selinux [ 0.108000] EVM: security.SMACK64 [ 0.108000] EVM: security.ima [ 0.108000] EVM: security.capability [ 0.108000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.108108] PM: Registering ACPI NVS region [mem 0x7fe74000-0x7fe75fff] (8192 bytes) [ 0.109796] pinctrl core: initialized pinctrl subsystem [ 0.109942] regulator-dummy: no parameters [ 0.109977] RTC time: 11:12:08, date: 08/09/16 [ 0.110053] NET: Registered protocol family 16 [ 0.110306] EISA bus registered [ 0.110310] cpuidle: using governor ladder [ 0.110313] cpuidle: using governor menu [ 0.110427] ACPI: bus type PCI registered [ 0.110433] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.110661] PCI: PCI BIOS revision 2.10 entry at 0xfbbbf, last bus=1 [ 0.110664] PCI: Using configuration type 1 for base access [ 0.112500] bio: create slab at 0 [ 0.112755] ACPI: Added _OSI(Module Device) [ 0.112759] ACPI: Added _OSI(Processor Device) [ 0.112761] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.112764] ACPI: Added _OSI(Processor Aggregator Device) [ 0.128523] ACPI: Interpreter enabled [ 0.128552] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.128559] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580) [ 0.128574] ACPI: (supports S0 S1 S4 S5) [ 0.128577] ACPI: Using IOAPIC for interrupt routing [ 0.128657] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.128737] ACPI: No dock devices found. [ 0.181693] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.181704] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.181714] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.184352] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.184357] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.184360] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.184364] acpi PNP0A03:00: host bridge window [mem 0x80860000-0xfebfffff] (ignored) [ 0.184368] PCI: root bus 00: using default resources [ 0.184373] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.184607] PCI host bridge to bus 0000:00 [ 0.184613] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.184617] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.184620] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.184637] pci 0000:00:00.0: [8086:2560] type 00 class 0x060000 [ 0.184650] pci 0000:00:00.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref] [ 0.184823] pci 0000:00:02.0: [8086:2562] type 00 class 0x030000 [ 0.184843] pci 0000:00:02.0: reg 0x10: [mem 0xe8000000-0xefffffff pref] [ 0.184854] pci 0000:00:02.0: reg 0x14: [mem 0xfeb80000-0xfebfffff] [ 0.185062] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300 [ 0.185111] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f] [ 0.185221] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.185273] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300 [ 0.185322] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f] [ 0.185431] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.185479] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300 [ 0.185527] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f] [ 0.185637] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.185702] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320 [ 0.185728] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff] [ 0.185829] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.185961] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400 [ 0.186080] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.186129] pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100 [ 0.186134] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, * this clock source is slow. If you are sure your timer does not have * this bug, please use "acpi_pm_good" to disable the workaround [ 0.186206] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000] [ 0.186213] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO [ 0.186342] pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a [ 0.186359] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7] [ 0.186370] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7] [ 0.186383] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177] [ 0.186396] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377] [ 0.186409] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] [ 0.186423] pci 0000:00:1f.1: reg 0x24: [mem 0xfeb7fc00-0xfeb7ffff] [ 0.186556] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500 [ 0.186604] pci 0000:00:1f.3: reg 0x20: [io 0xeda0-0xedbf] [ 0.186749] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100 [ 0.186768] pci 0000:00:1f.5: reg 0x10: [io 0xee00-0xeeff] [ 0.186780] pci 0000:00:1f.5: reg 0x14: [io 0xedc0-0xedff] [ 0.186793] pci 0000:00:1f.5: reg 0x18: [mem 0xfeb7fa00-0xfeb7fbff] [ 0.186806] pci 0000:00:1f.5: reg 0x1c: [mem 0xfeb7f900-0xfeb7f9ff] [ 0.186857] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.187034] pci 0000:01:09.0: [14e4:4401] type 00 class 0x020000 [ 0.187053] pci 0000:01:09.0: reg 0x10: [mem 0xfe9fe000-0xfe9fffff] [ 0.187100] pci 0000:01:09.0: reg 0x30: [mem 0xfea00000-0xfea03fff pref] [ 0.187128] pci 0000:01:09.0: supports D1 D2 [ 0.187132] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.187205] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 0.187215] pci 0000:00:1e.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.187221] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.187224] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.187235] pci_bus 0000:00: on NUMA node 0 [ 0.195296] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.195683] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.196093] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.196476] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.196868] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.197260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.197653] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.198037] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.198215] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.198227] ACPI: \_SB_.PCI0: notify handler is installed [ 0.198249] Found 1 acpi root devices [ 0.198454] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.198458] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.198463] vgaarb: loaded [ 0.198466] vgaarb: bridge control possible 0000:00:02.0 [ 0.198822] SCSI subsystem initialized [ 0.198919] libata version 3.00 loaded. [ 0.198960] ACPI: bus type USB registered [ 0.199000] usbcore: registered new interface driver usbfs [ 0.199018] usbcore: registered new interface driver hub [ 0.199058] usbcore: registered new device driver usb [ 0.199236] PCI: Using ACPI for IRQ routing [ 0.199243] PCI: pci_cache_line_size set to 64 bytes [ 0.199290] e820: reserve RAM buffer [mem 0x7fe74000-0x7fffffff] [ 0.199459] NetLabel: Initializing [ 0.199462] NetLabel: domain hash size = 128 [ 0.199464] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.199494] NetLabel: unlabeled traffic allowed by default [ 0.199691] Switched to clocksource refined-jiffies [ 0.211827] AppArmor: AppArmor Filesystem Enabled [ 0.211900] pnp: PnP ACPI init [ 0.211928] ACPI: bus type PNP registered [ 0.215412] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.215419] system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved [ 0.215423] system 00:00: [mem 0x01000000-0x7fe73fff] could not be reserved [ 0.215427] system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved [ 0.215432] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.215436] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.215440] system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved [ 0.215444] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.215448] system 00:00: [mem 0xffc00000-0xffffffff] has been reserved [ 0.215455] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.217568] pnp 00:01: [dma 4] [ 0.217599] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.217737] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.217852] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.217971] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.220740] pnp 00:05: [dma 2] [ 0.220973] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.225395] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.228440] pnp 00:07: [dma 0 disabled] [ 0.228931] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.230519] pnp 00:08: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] [ 0.230524] pnp 00:08: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] [ 0.230569] system 00:08: [io 0x0c00-0x0c7f] has been reserved [ 0.230574] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.231266] pnp: PnP ACPI: found 9 devices [ 0.231269] ACPI: bus type PNP unregistered [ 0.231276] PnPBIOS: Disabled by ACPI PNP [ 0.268299] Switched to clocksource acpi_pm [ 0.268333] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment [ 0.268340] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.268350] pci 0000:00:1e.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.268361] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.268366] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.268371] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff] [ 0.268374] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.268377] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff] [ 0.268454] NET: Registered protocol family 2 [ 0.268835] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.268868] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.268926] TCP: Hash tables configured (established 8192 bind 8192) [ 0.269013] TCP: reno registered [ 0.269019] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.269037] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.269143] NET: Registered protocol family 1 [ 0.269172] pci 0000:00:02.0: Video device with shadowed ROM [ 0.270820] PCI: CLS 0 bytes, default 64 [ 0.270931] Trying to unpack rootfs image as initramfs... [ 0.817516] Freeing initrd memory: 18360K (f5c14000 - f6e02000) [ 0.817689] Simple Boot Flag value 0x87 read from CMOS RAM was invalid [ 0.817692] Simple Boot Flag at 0x7a set to 0x1 [ 0.817864] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x17 [ 0.817961] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.817965] Scanning for low memory corruption every 60 seconds [ 0.818431] Initialise system trusted keyring [ 0.818507] audit: initializing netlink socket (disabled) [ 0.818532] type=2000 audit(1470741128.815:1): initialized [ 0.848873] bounce pool size: 64 pages [ 0.848892] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.850768] zbud: loaded [ 0.850914] VFS: Disk quotas dquot_6.5.2 [ 0.851001] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.851731] fuse init (API version 7.22) [ 0.851855] msgmni has been set to 1717 [ 0.851971] Key type big_key registered [ 0.852524] Key type asymmetric registered [ 0.852528] Asymmetric key parser 'x509' registered [ 0.852600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.852654] io scheduler noop registered [ 0.852658] io scheduler deadline registered (default) [ 0.852701] io scheduler cfq registered [ 0.852879] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.852904] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.852985] vesafb: mode is 1024x768x8, linelength=1024, pages=0 [ 0.852988] vesafb: scrolling: redraw [ 0.852992] vesafb: Pseudocolor: size=0:6:6:6, shift=0:0:0:0 [ 0.853284] vesafb: framebuffer at 0xe8000000, mapped to 0xf8480000, using 768k, total 768k [ 0.855161] Console: switching to colour frame buffer device 128x48 [ 0.856922] fb0: VESA VGA frame buffer device [ 0.856968] ipmi message handler version 39.2 [ 0.857070] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.857080] ACPI: Power Button [VBTN] [ 0.857140] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.857145] ACPI: Power Button [PWRF] [ 0.857325] GHES: HEST is not enabled! [ 0.857475] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.877921] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.877985] isapnp: Scanning for PnP cards... [ 0.928890] Linux agpgart interface v0.103 [ 0.928961] agpgart-intel 0000:00:00.0: Intel 845G Chipset [ 0.928990] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable [ 0.929124] agpgart-intel 0000:00:00.0: detected 1024K stolen memory [ 0.929298] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 0.931379] brd: module loaded [ 0.932555] loop: module loaded [ 0.932786] ata_piix 0000:00:1f.1: version 2.13 [ 0.933547] scsi0 : ata_piix [ 0.933647] scsi1 : ata_piix [ 0.933697] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.933700] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.934199] libphy: Fixed MDIO Bus: probed [ 0.934365] tun: Universal TUN/TAP device driver, 1.6 [ 0.934367] tun: (C) 1999-2004 Max Krasnyansky [ 0.934493] PPP generic driver version 2.4.2 [ 0.934569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.934579] ehci-pci: EHCI PCI platform driver [ 0.934874] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.934885] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.934905] ehci-pci 0000:00:1d.7: debug port 1 [ 0.938835] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.938877] ehci-pci 0000:00:1d.7: irq 23, io mem 0xffa80800 [ 0.982788] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.982907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.982911] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.982915] usb usb1: Product: EHCI Host Controller [ 0.982918] usb usb1: Manufacturer: Linux 3.13.0-92-generic ehci_hcd [ 0.982921] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.983095] hub 1-0:1.0: USB hub found [ 0.983111] hub 1-0:1.0: 6 ports detected [ 0.983348] ehci-platform: EHCI generic platform driver [ 0.983376] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.983378] ohci-pci: OHCI PCI platform driver [ 0.983396] ohci-platform: OHCI generic platform driver [ 0.983407] uhci_hcd: USB Universal Host Controller Interface driver [ 0.983681] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.983691] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.983738] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80 [ 0.983843] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.983847] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.983850] usb usb2: Product: UHCI Host Controller [ 0.983853] usb usb2: Manufacturer: Linux 3.13.0-92-generic uhci_hcd [ 0.983856] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.984058] hub 2-0:1.0: USB hub found [ 0.984073] hub 2-0:1.0: 2 ports detected [ 0.984415] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.984425] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.984469] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60 [ 0.984550] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.984555] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.984558] usb usb3: Product: UHCI Host Controller [ 0.984561] usb usb3: Manufacturer: Linux 3.13.0-92-generic uhci_hcd [ 0.984564] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.984717] hub 3-0:1.0: USB hub found [ 0.984729] hub 3-0:1.0: 2 ports detected [ 0.985066] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.985075] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.985114] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 0.985195] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.985199] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.985202] usb usb4: Product: UHCI Host Controller [ 0.985205] usb usb4: Manufacturer: Linux 3.13.0-92-generic uhci_hcd [ 0.985207] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.985355] hub 4-0:1.0: USB hub found [ 0.985367] hub 4-0:1.0: 2 ports detected [ 0.985612] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.032385] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.032397] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.032576] mousedev: PS/2 mouse device common for all mice [ 1.032766] rtc_cmos 00:04: RTC can wake from S4 [ 1.032911] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.032938] rtc_cmos 00:04: alarms up to one day, 242 bytes nvram [ 1.033062] device-mapper: uevent: version 1.0.3 [ 1.033170] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.033205] platform eisa.0: Probing EISA bus 0 [ 1.033250] platform eisa.0: EISA: Detected 0 cards [ 1.033266] cpufreq-nforce2: No nForce2 chipset. [ 1.033272] ledtrig-cpu: registered to indicate activity on CPUs [ 1.033480] TCP: cubic registered [ 1.033623] NET: Registered protocol family 10 [ 1.033932] NET: Registered protocol family 17 [ 1.033956] Key type dns_resolver registered [ 1.034193] Using IPI No-Shortcut mode [ 1.034310] Loading compiled-in X.509 certificates [ 1.040752] Loaded X.509 cert 'Magrathea: Glacier signing key: cf9854fc95ca53b227925e98028989ef476b4315' [ 1.040775] registered taskstats version 1 [ 1.045015] Key type trusted registered [ 1.097331] ata2.01: NODEV after polling detection [ 1.097449] ata1.00: ATA-6: WDC WD400BB-22JHA0, 05.01C05, max UDMA/100 [ 1.097453] ata1.00: 78165360 sectors, multi 8: LBA [ 1.097972] ata2.00: ATAPI: IDE-CD R/RW 48xC, RW08, max UDMA/33 [ 1.098341] Key type encrypted registered [ 1.098350] AppArmor: AppArmor sha1 policy hashing enabled [ 1.098354] IMA: No TPM chip found, activating TPM-bypass! [ 1.098576] regulator-dummy: disabling [ 1.142489] Magic number: 12:22:226 [ 1.142508] port3: hash matches [ 1.142615] rtc_cmos 00:04: setting system clock to 2016-08-09 11:12:09 UTC (1470741129) [ 1.142729] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.142732] EDD information not available. [ 1.142778] PM: Hibernation image not present or could not be loaded. [ 1.186969] ata2.00: configured for UDMA/33 [ 1.187031] ata1.00: configured for UDMA/100 [ 1.230645] isapnp: No Plug & Play device found [ 1.231411] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-22JH 05.0 PQ: 0 ANSI: 5 [ 1.231747] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.231871] sd 0:0:0:0: [sda] Write Protect is off [ 1.231876] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.231920] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.232170] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.233488] scsi 1:0:0:0: CD-ROM IDE-CD R/RW 48xC RW08 PQ: 0 ANSI: 5 [ 1.237276] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.237281] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.237432] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.237598] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.295675] sda: sda1 sda2 < sda5 > [ 1.296189] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.297367] Freeing unused kernel memory: 884K (c19c7000 - c1aa4000) [ 1.297428] Write protecting the kernel text: 6584k [ 1.297516] Write protecting the kernel read-only data: 2780k [ 1.328430] systemd-udevd[97]: starting version 204 [ 1.340094] usb 1-4: new high-speed USB device number 2 using ehci-pci [ 1.431770] Floppy drive(s): fd0 is 1.44M [ 1.446569] FDC 0 is a post-1991 82077 [ 1.488973] usb 1-4: New USB device found, idVendor=03f0, idProduct=9311 [ 1.488979] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.488983] usb 1-4: Product: Deskjet 3050 J610 series [ 1.488986] usb 1-4: Manufacturer: HP [ 1.488989] usb 1-4: SerialNumber: CN0B33901T05HX [ 1.516112] ssb: Found chip with id 0x4401, rev 0x01 and package 0x00 [ 1.516123] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243) [ 1.516131] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243) [ 1.516137] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243) [ 1.556330] ssb: Sonics Silicon Backplane found on PCI device 0000:01:09.0 [ 1.556486] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0 [ 1.576639] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:0f:1f:4a:6b:1b [ 1.816041] tsc: Refined TSC clocksource calibration: 2657.812 MHz [ 1.988046] usb 4-2: new full-speed USB device number 2 using uhci_hcd [ 2.177982] usb 4-2: New USB device found, idVendor=046d, idProduct=c52b [ 2.177988] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.177992] usb 4-2: Product: USB Receiver [ 2.177995] usb 4-2: Manufacturer: Logitech [ 2.223770] hidraw: raw HID events driver (C) Jiri Kosina [ 2.266106] usbcore: registered new interface driver usbhid [ 2.266112] usbhid: USB HID core driver [ 2.299641] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input2 [ 2.303942] input: Logitech Unifying Device. Wireless PID:4031 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input5 [ 2.304204] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4031] on usb-0000:00:1d.2-2:1 [ 2.306396] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input6 [ 2.306548] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1d.2-2:2 [ 2.359977] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.816191] Switched to clocksource tsc [ 3.061453] random: nonblocking pool is initialized [ 23.404555] Adding 2094076k swap on /dev/sda5. Priority:-1 extents:1 across:2094076k FS [ 23.592772] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.977647] systemd-udevd[260]: starting version 204 [ 24.423248] lp: driver loaded but no devices found [ 24.545709] ppdev: user-space parallel port driver [ 24.592149] parport_pc 00:07: reported by Plug and Play ACPI [ 24.592209] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 24.659642] intel_rng: FWH not detected [ 24.684994] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 24.726414] lp0: using parport0 (interrupt-driven). [ 24.736310] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.938027] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \GLBC 1 (20131115/utaddress-251) [ 24.938040] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \SACT 2 (20131115/utaddress-251) [ 24.938045] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \SSTS 3 (20131115/utaddress-251) [ 24.938050] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.938055] ACPI Warning: 0x00000880-0x000008af SystemIO conflicts with Region \LEDY 1 (20131115/utaddress-251) [ 24.938060] ACPI Warning: 0x00000880-0x000008af SystemIO conflicts with Region \LEDX 2 (20131115/utaddress-251) [ 24.938065] ACPI Warning: 0x00000880-0x000008af SystemIO conflicts with Region \SPKR 3 (20131115/utaddress-251) [ 24.938070] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.938168] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 24.938803] [drm] Initialized drm 1.1.0 20060810 [ 25.371850] [drm] Memory usable by graphics device = 128M [ 25.371859] checking generic (e8000000 c0000) vs hw (e8000000 8000000) [ 25.371862] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 25.371904] Console: switching to colour dummy device 80x25 [ 25.376432] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 25.376438] [drm] Driver supports precise vblank timestamp query. [ 25.376514] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 25.393005] [drm] initialized overlay support [ 25.435291] type=1400 audit(1470741153.787:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=366 comm="apparmor_parser" [ 25.435305] type=1400 audit(1470741153.787:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=366 comm="apparmor_parser" [ 25.435313] type=1400 audit(1470741153.787:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser" [ 25.440366] type=1400 audit(1470741153.795:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=366 comm="apparmor_parser" [ 25.440383] type=1400 audit(1470741153.795:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser" [ 25.440996] type=1400 audit(1470741153.795:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser" [ 25.450999] type=1400 audit(1470741153.803:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=389 comm="apparmor_parser" [ 25.625778] WARNING! power/level is deprecated; use power/control instead [ 25.719209] usblp 1-4:1.1: usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x9311 [ 25.719295] usbcore: registered new interface driver usblp [ 25.721117] fbcon: inteldrmfb (fb0) is primary device [ 25.772172] Console: switching to colour frame buffer device 240x67 [ 25.801902] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 25.801906] i915 0000:00:02.0: registered panic notifier [ 25.801936] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 26.336032] intel8x0_measure_ac97_clock: measured 54733 usecs (2637 samples) [ 26.336040] intel8x0: clocking to 48000 [ 26.463990] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 28.984381] Bluetooth: Core ver 2.17 [ 28.984516] NET: Registered protocol family 31 [ 28.984520] Bluetooth: HCI device and connection manager initialized [ 28.985324] Bluetooth: HCI socket layer initialized [ 28.985335] Bluetooth: L2CAP socket layer initialized [ 28.985350] Bluetooth: SCO socket layer initialized [ 29.046015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 29.046022] Bluetooth: BNEP filters: protocol multicast [ 29.046042] Bluetooth: BNEP socket layer initialized [ 29.072156] Bluetooth: RFCOMM TTY layer initialized [ 29.072182] Bluetooth: RFCOMM socket layer initialized [ 29.072198] Bluetooth: RFCOMM ver 1.11 [ 29.408796] init: failsafe main process (506) killed by TERM signal [ 30.191197] type=1400 audit(1470741158.543:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=661 comm="apparmor_parser" [ 30.191216] type=1400 audit(1470741158.543:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=661 comm="apparmor_parser" [ 30.204237] type=1400 audit(1470741158.559:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=661 comm="apparmor_parser" [ 31.552475] init: cups main process (663) killed by HUP signal [ 31.552503] init: cups main process ended, respawning [ 34.357482] init: samba-ad-dc main process (717) terminated with status 1 [ 34.771484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.772641] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.816177] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex [ 37.816185] b44 ssb0:0 eth0: Flow control is off for TX and off for RX [ 37.816268] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 38.341282] type=1400 audit(1470741166.695:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=916 comm="apparmor_parser" [ 38.341300] type=1400 audit(1470741166.695:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=916 comm="apparmor_parser" [ 38.342002] type=1400 audit(1470741166.695:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=916 comm="apparmor_parser" [ 38.349585] type=1400 audit(1470741166.703:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=917 comm="apparmor_parser" [ 38.349604] type=1400 audit(1470741166.703:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=917 comm="apparmor_parser" [ 38.349614] type=1400 audit(1470741166.703:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=917 comm="apparmor_parser" [ 38.350737] type=1400 audit(1470741166.703:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=917 comm="apparmor_parser" [ 38.350745] type=1400 audit(1470741166.703:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=917 comm="apparmor_parser" [ 38.351312] type=1400 audit(1470741166.703:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=917 comm="apparmor_parser" [ 38.357381] type=1400 audit(1470741166.711:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=918 comm="apparmor_parser" [ 39.000487] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 41.361888] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 41.372895] vboxdrv: Found 1 processor cores. [ 41.385590] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 41.385598] vboxdrv: Successfully loaded version 4.3.36_Ubuntu (interface 0x001a000b). [ 41.528703] vboxpci: IOMMU not found (not registered) [ 46.248425] init: plymouth-upstart-bridge main process ended, respawning [ 46.319809] init: plymouth-upstart-bridge main process ended, respawning [ 47.311766] init: plymouth-stop pre-start process (1560) terminated with status 1 [ 60.744709] audit_printk_skb: 102 callbacks suppressed [ 60.744716] type=1400 audit(1470741189.098:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1929 comm="apparmor_parser" [ 60.744732] type=1400 audit(1470741189.098:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1929 comm="apparmor_parser" [ 60.745925] type=1400 audit(1470741189.098:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1929 comm="apparmor_parser" [ 1203.591213] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 1256.586362] init: upstart-udev-bridge main process (254) terminated with status 1 [ 1256.586391] init: upstart-udev-bridge main process ended, respawning [ 1256.601915] init: upstart-file-bridge main process (701) terminated with status 1 [ 1256.601949] init: upstart-file-bridge main process ended, respawning [ 1256.603975] init: upstart-socket-bridge main process (704) terminated with status 1 [ 1256.604531] init: upstart-socket-bridge main process ended, respawning [ 1613.422580] cron[14301]: segfault at 504 ip b74aabef sp bfde0500 error 4 in libpthread-2.23.so[b74a6000+19000] [ 3413.454507] cron[1096]: segfault at 504 ip b74aabef sp bfde0500 error 4 in libpthread-2.23.so[b74a6000+19000] [ 3582.933806] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 3583.123520] JFS: nTxBlock = 8192, nTxLock = 65536 [ 3583.343815] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 3583.678523] QNX4 filesystem 0.2.3 registered. [ 3583.850113] xor: measuring software checksum speed [ 3583.888008] pIII_sse : 3360.000 MB/sec [ 3583.928008] prefetch64-sse: 4253.000 MB/sec [ 3583.928011] xor: using function: prefetch64-sse (4253.000 MB/sec) [ 3584.044027] raid6: mmxx1 2188 MB/s [ 3584.112019] raid6: mmxx2 2766 MB/s [ 3584.180033] raid6: sse1x1 1390 MB/s [ 3584.248019] raid6: sse1x2 2422 MB/s [ 3584.316017] raid6: sse2x1 2277 MB/s [ 3584.384026] raid6: sse2x2 2903 MB/s [ 3584.384029] raid6: using algorithm sse2x2 (2903 MB/s) [ 3584.384031] raid6: using intx1 recovery algorithm [ 3584.692131] bio: create slab at 1 [ 3584.692501] Btrfs loaded [ 3585.284275] EXT4-fs (sda2): unable to read superblock [ 3585.288593] EXT4-fs (sda2): unable to read superblock [ 3585.293082] EXT4-fs (sda2): unable to read superblock [ 3585.297509] FAT-fs (sda2): bogus number of reserved sectors [ 3585.297518] FAT-fs (sda2): Can't find a valid FAT filesystem [ 3585.409091] XFS (sda2): bad magic number [ 3585.409103] XFS (sda2): SB validate failed with error 22. [ 3585.418320] FAT-fs (sda2): bogus number of reserved sectors [ 3585.418329] FAT-fs (sda2): Can't find a valid FAT filesystem [ 3585.430632] MINIX-fs: unable to read superblock [ 3585.484280] attempt to access beyond end of device [ 3585.484289] sda2: rw=16, want=3, limit=2 [ 3585.484295] hfsplus: unable to find HFS+ superblock [ 3585.488841] qnx4: wrong fsid in superblock. [ 3585.492729] You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 3585.501406] hfs: can't find a HFS filesystem on dev sda2 [ 3656.981615] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [ 3656.982406] CPU0: Core temperature/speed normal [ 3712.105833] perf samples too long (5025 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [ 3893.621780] cron[26142]: segfault at 504 ip b74aabef sp bfde0500 error 4 in libpthread-2.23.so[b74a6000+19000] [ 3900.000166] mce: [Hardware Error]: Machine check events logged [ 3963.398691] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4075) [ 3963.399649] CPU0: Core temperature/speed normal [ 4050.000173] mce: [Hardware Error]: Machine check events logged [ 4263.396201] CPU0: Core temperature/speed normal [ 4275.000159] mce: [Hardware Error]: Machine check events logged [ 4777.739671] CPU0: Core temperature above threshold, cpu clock throttled (total events = 115317) [ 4777.740600] CPU0: Core temperature/speed normal [ 4800.000176] mce: [Hardware Error]: Machine check events logged