[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-24-generic-pae (buildd@vernadsky) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37-Ubuntu SMP Wed Apr 25 10:47:59 UTC 2012 (Ubuntu 3.2.0-24.37-generic-pae 3.2.14) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: HP-Pavilion FR650AA-ABF s3642fr/Acacia, BIOS 5.19 10/17/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 000100000000 mask FFFFC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000140000000 aka 5120M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00f5440] f5440 [ 0.000000] initial memory mapped : 0 - 02000000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000 [ 0.000000] RAMDISK: 35a28000 - 36d0c000 [ 0.000000] ACPI: RSDP 000f7580 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT bfef3100 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP bfef7dc0 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT bfef32c0 04AA7 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS bfef0000 00040 [ 0.000000] ACPI: SLIC bfef8000 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT bfef81c0 0067F (v01 HPQOEM SLIC-CPC 00000001 LTP 00000001) [ 0.000000] ACPI: HPET bfef8880 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG bfef8900 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC bfef7f00 00098 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4228MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfef0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048191 [ 0.000000] free_area_init_node: node 0, pgdat c186b480, node_mem_map f3228200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8457 pages used for memmap [ 0.000000] HighMem zone: 811497 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7800000 s34240 r0 d23104 u524288 [ 0.000000] pcpu-alloc: s34240 r0 d23104 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037950 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic-pae root=UUID=4023808d-38a4-445b-a306-7fc91b482ce3 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 20971264 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00140000) [ 0.000000] Memory: 4100504k/5242880k available (5825k kernel code, 92260k reserved, 2850k data, 740k init, 3279816k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc1879000 - 0xc1932000 ( 740 kB) [ 0.000000] .data : 0xc15b04bc - 0xc1878d00 (2850 kB) [ 0.000000] .text : 0xc1000000 - 0xc15b04bc (5825 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1900.112 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3800.22 BogoMIPS (lpj=7600448) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004039] Security Framework initialized [ 0.004062] AppArmor: AppArmor initialized [ 0.004065] Yama: becoming mindful. [ 0.004140] Mount-cache hash table entries: 512 [ 0.004302] Initializing cgroup subsys cpuacct [ 0.004310] Initializing cgroup subsys memory [ 0.004321] Initializing cgroup subsys devices [ 0.004324] Initializing cgroup subsys freezer [ 0.004327] Initializing cgroup subsys blkio [ 0.004337] Initializing cgroup subsys perf_event [ 0.004364] CPU: Physical Processor ID: 0 [ 0.004366] CPU: Processor Core ID: 0 [ 0.004371] mce: CPU supports 6 MCE banks [ 0.004382] using AMD E400 aware idle routine [ 0.010033] ACPI: Core revision 20110623 [ 0.016036] ftrace: allocating 26594 entries in 53 pages [ 0.020064] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020603] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063241] CPU0: AMD Phenom(tm) 8250e Triple-Core Processor stepping 03 [ 0.064003] Performance Events: AMD PMU driver. [ 0.064003] ... version: 0 [ 0.064003] ... bit width: 48 [ 0.064003] ... generic registers: 4 [ 0.064003] ... value mask: 0000ffffffffffff [ 0.064003] ... max period: 00007fffffffffff [ 0.064003] ... fixed-purpose events: 0 [ 0.064003] ... event mask: 000000000000000f [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] CPU 1 irqstacks, hard=f74d2000 soft=f74d4000 [ 0.064003] Booting Node 0, Processors #1 [ 0.064003] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.152027] NMI watchdog enabled, takes one hw-pmu counter. [ 0.152110] CPU 2 irqstacks, hard=f74e0000 soft=f74e2000 [ 0.152113] #2 [ 0.152114] smpboot cpu 2: start_ip = 9b000 [ 0.008000] Initializing CPU#2 [ 0.244032] NMI watchdog enabled, takes one hw-pmu counter. [ 0.244054] Brought up 3 CPUs [ 0.244057] Total of 3 processors activated (11400.50 BogoMIPS). [ 0.246109] devtmpfs: initialized [ 0.246109] EVM: security.selinux [ 0.246109] EVM: security.SMACK64 [ 0.246109] EVM: security.capability [ 0.246109] PM: Registering ACPI NVS region at bfef0000 (12288 bytes) [ 0.246109] print_constraints: dummy: [ 0.246109] RTC time: 9:23:25, date: 04/30/12 [ 0.246109] NET: Registered protocol family 16 [ 0.248027] EISA bus registered [ 0.246109] Trying to unpack rootfs image as initramfs... [ 0.248038] node 0 link 0: io port [b000, ffff] [ 0.248043] TOM: 00000000c0000000 aka 3072M [ 0.248046] node 0 link 0: mmio [a0000, bffff] [ 0.248050] node 0 link 0: mmio [c0000000, efffffff] [ 0.248054] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.248057] node 0 link 0: mmio [f0000000, f02fffff] [ 0.248060] TOM2: 0000000140000000 aka 5120M [ 0.248063] bus: [00, 02] on node 0 link 0 [ 0.248066] bus: 00 index 0 [io 0x0000-0xffff] [ 0.248069] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.248072] bus: 00 index 2 [mem 0xc0000000-0xf3ffffff] [ 0.248074] bus: 00 index 3 [mem 0xf4000000-0xffffffff] [ 0.248077] bus: 00 index 4 [mem 0x140000000-0xfcffffffff] [ 0.248085] Extended Config Space enabled on 1 nodes [ 0.248109] ACPI: bus type pci registered [ 0.248183] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.248187] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.248189] PCI: Using MMCONFIG for extended config space [ 0.248191] PCI: Using configuration type 1 for base access [ 0.249273] bio: create slab at 0 [ 0.249273] ACPI: Added _OSI(Module Device) [ 0.249273] ACPI: Added _OSI(Processor Device) [ 0.249273] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.249273] ACPI: Added _OSI(Processor Aggregator Device) [ 0.249297] ACPI: EC: Look up EC in DSDT [ 0.255862] ACPI: Interpreter enabled [ 0.255871] ACPI: (supports S0 S1 S3 S4 S5) [ 0.255897] ACPI: Using IOAPIC for interrupt routing [ 0.260710] ACPI: No dock devices found. [ 0.260713] HEST: Table not found. [ 0.260718] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.260784] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.260914] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.260918] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.260921] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.260924] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.260927] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] [ 0.260956] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500 [ 0.261134] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601 [ 0.261178] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05 [ 0.261190] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f] [ 0.261208] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] [ 0.261214] pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f] [ 0.261245] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.261251] pci 0000:00:01.1: PME# disabled [ 0.261262] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500 [ 0.261308] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03 [ 0.261318] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff] [ 0.261356] pci 0000:00:02.0: supports D1 D2 [ 0.261359] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.261362] pci 0000:00:02.0: PME# disabled [ 0.261375] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03 [ 0.261386] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] [ 0.261432] pci 0000:00:02.1: supports D1 D2 [ 0.261434] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.261438] pci 0000:00:02.1: PME# disabled [ 0.261457] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604 [ 0.261502] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403 [ 0.261514] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff] [ 0.261561] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.261564] pci 0000:00:05.0: PME# disabled [ 0.261583] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101 [ 0.261608] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] [ 0.261642] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680 [ 0.261653] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.261658] pci 0000:00:07.0: reg 14: [io 0xec00-0xec07] [ 0.261697] pci 0000:00:07.0: supports D1 D2 [ 0.261699] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.261704] pci 0000:00:07.0: PME# disabled [ 0.261717] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101 [ 0.261726] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7] [ 0.261732] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.261737] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977] [ 0.261742] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73] [ 0.261747] pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f] [ 0.261753] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff] [ 0.261792] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604 [ 0.261826] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.261829] pci 0000:00:09.0: PME# disabled [ 0.261853] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.261877] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.261895] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.261913] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.261934] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.261984] pci 0000:01:05.0: [11c1:5811] type 0 class 0x000c00 [ 0.261997] pci 0000:01:05.0: reg 10: [mem 0xfddff000-0xfddfffff] [ 0.262053] pci 0000:01:05.0: supports D1 D2 [ 0.262055] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot [ 0.262059] pci 0000:01:05.0: PME# disabled [ 0.262089] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.262093] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] [ 0.262097] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.262101] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.262104] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.262107] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.262111] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.262114] pci 0000:00:04.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.262117] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.262150] pci 0000:02:00.0: [10de:0a20] type 0 class 0x000300 [ 0.262159] pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.262169] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.262179] pci 0000:02:00.0: reg 1c: [mem 0xee000000-0xefffffff 64bit pref] [ 0.262186] pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f] [ 0.262193] pci 0000:02:00.0: reg 30: [mem 0xfcf00000-0xfcf7ffff pref] [ 0.262241] pci 0000:02:00.1: [10de:0be2] type 0 class 0x000403 [ 0.262250] pci 0000:02:00.1: reg 10: [mem 0xfcffc000-0xfcffffff] [ 0.268035] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.268039] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] [ 0.268042] pci 0000:00:09.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.268047] pci 0000:00:09.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref] [ 0.268054] pci_bus 0000:00: on NUMA node 0 [ 0.268058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.268194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.268284] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.268288] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.268290] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.284895] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.284943] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.284989] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.285035] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 0.285079] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.285122] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.285166] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.285211] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15) [ 0.285254] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.285300] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.285345] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.285390] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 0.285434] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15) [ 0.285477] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.285521] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.285566] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15) [ 0.285608] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.285653] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 0.285698] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.285781] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.285856] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.285928] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.286000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.286072] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.286143] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.286216] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.286287] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0 [ 0.286359] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0, disabled. [ 0.286433] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0 [ 0.286505] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0 [ 0.286578] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled. [ 0.286651] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0 [ 0.286723] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0 [ 0.286795] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0 [ 0.286867] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled. [ 0.286941] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled. [ 0.287016] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0 [ 0.287090] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0, disabled. [ 0.287206] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.287206] vgaarb: loaded [ 0.287206] vgaarb: bridge control possible 0000:02:00.0 [ 0.287206] i2c-core: driver [aat2870] using legacy suspend method [ 0.287206] i2c-core: driver [aat2870] using legacy resume method [ 0.287206] SCSI subsystem initialized [ 0.287206] libata version 3.00 loaded. [ 0.287206] usbcore: registered new interface driver usbfs [ 0.287206] usbcore: registered new interface driver hub [ 0.287206] usbcore: registered new device driver usb [ 0.287206] PCI: Using ACPI for IRQ routing [ 0.289259] PCI: pci_cache_line_size set to 64 bytes [ 0.289325] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.289328] reserve RAM buffer: 00000000bfef0000 - 00000000bfffffff [ 0.289449] NetLabel: Initializing [ 0.289452] NetLabel: domain hash size = 128 [ 0.289454] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.289466] NetLabel: unlabeled traffic allowed by default [ 0.289593] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.289593] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.289593] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.296424] Switching to clocksource hpet [ 0.303766] AppArmor: AppArmor Filesystem Enabled [ 0.303806] pnp: PnP ACPI init [ 0.303828] ACPI: bus type pnp registered [ 0.303964] pnp 00:00: [bus 00-ff] [ 0.303967] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.303970] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.303972] pnp 00:00: [io 0x0d00-0xffff window] [ 0.303975] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.303978] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.303980] pnp 00:00: [mem 0xc0000000-0xfebfffff window] [ 0.304079] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.304100] pnp 00:01: [io 0x1000-0x107f] [ 0.304102] pnp 00:01: [io 0x1080-0x10ff] [ 0.304104] pnp 00:01: [io 0x1400-0x147f] [ 0.304107] pnp 00:01: [io 0x1480-0x14ff] [ 0.304109] pnp 00:01: [io 0x1800-0x187f] [ 0.304111] pnp 00:01: [io 0x1880-0x18ff] [ 0.304172] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.304175] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.304178] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.304181] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.304184] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.304187] system 00:01: [io 0x1880-0x18ff] has been reserved [ 0.304191] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.304242] pnp 00:02: [io 0x0010-0x001f] [ 0.304245] pnp 00:02: [io 0x0022-0x003f] [ 0.304247] pnp 00:02: [io 0x0044-0x005f] [ 0.304249] pnp 00:02: [io 0x0062-0x0063] [ 0.304251] pnp 00:02: [io 0x0065-0x006f] [ 0.304253] pnp 00:02: [io 0x0074-0x007f] [ 0.304256] pnp 00:02: [io 0x0091-0x0093] [ 0.304258] pnp 00:02: [io 0x00a2-0x00bf] [ 0.304260] pnp 00:02: [io 0x00e0-0x00ef] [ 0.304262] pnp 00:02: [io 0x04d0-0x04d1] [ 0.304264] pnp 00:02: [io 0x0290-0x029f] [ 0.304321] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.304324] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.304328] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.304340] pnp 00:03: [dma 4] [ 0.304342] pnp 00:03: [io 0x0000-0x000f] [ 0.304345] pnp 00:03: [io 0x0080-0x0090] [ 0.304347] pnp 00:03: [io 0x0094-0x009f] [ 0.304349] pnp 00:03: [io 0x00c0-0x00df] [ 0.304380] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.304431] pnp 00:04: [irq 0 disabled] [ 0.304446] pnp 00:04: [irq 8] [ 0.304448] pnp 00:04: [mem 0xfefff000-0xfefff3ff] [ 0.304484] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.304509] pnp 00:05: [io 0x0070-0x0073] [ 0.304542] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.304552] pnp 00:06: [io 0x0061] [ 0.304584] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.304593] pnp 00:07: [io 0x00f0-0x00ff] [ 0.304602] pnp 00:07: [irq 13] [ 0.304637] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.305205] pnp 00:08: [mem 0xf0000000-0xf3ffffff] [ 0.305268] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.305272] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.305318] pnp 00:09: [mem 0xfefff000-0xfefff0ff] [ 0.305321] pnp 00:09: [mem 0xffff0000-0xffffffff] [ 0.305324] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.305326] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.305329] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 0.305331] pnp 00:09: [mem 0xfefff000-0xfeffffff] [ 0.305333] pnp 00:09: [mem 0xfff80000-0xfff80fff] [ 0.305336] pnp 00:09: [mem 0xfff90000-0xfffbffff] [ 0.305338] pnp 00:09: [mem 0xfffed000-0xfffeffff] [ 0.305410] system 00:09: [mem 0xfefff000-0xfefff0ff] has been reserved [ 0.305413] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved [ 0.305417] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.305420] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.305423] system 00:09: [mem 0xfefff000-0xfeffffff] could not be reserved [ 0.305427] system 00:09: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.305430] system 00:09: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.305433] system 00:09: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.305437] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.305447] pnp: PnP ACPI: found 10 devices [ 0.305449] ACPI: ACPI bus type pnp unregistered [ 0.305453] PnPBIOS: Disabled by ACPI PNP [ 0.343281] PCI: max bus depth: 1 pci_try_num: 2 [ 0.343296] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.343300] pci 0000:00:04.0: bridge window [io 0xc000-0xcfff] [ 0.343304] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.343308] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.343314] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.343317] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] [ 0.343320] pci 0000:00:09.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.343324] pci 0000:00:09.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref] [ 0.343334] pci 0000:00:04.0: setting latency timer to 64 [ 0.343340] pci 0000:00:09.0: setting latency timer to 64 [ 0.343343] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.343346] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.343349] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.343352] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.343355] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff] [ 0.343358] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.343361] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.343364] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff pref] [ 0.343367] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.343370] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.343373] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.343375] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff] [ 0.343378] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xfebfffff] [ 0.343381] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.343384] pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.343387] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xefffffff 64bit pref] [ 0.343436] NET: Registered protocol family 2 [ 0.343512] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.343763] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.344431] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.344749] TCP: Hash tables configured (established 131072 bind 65536) [ 0.344752] TCP reno registered [ 0.344756] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.344767] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.344846] NET: Registered protocol family 1 [ 0.345077] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.345095] pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.416036] pci 0000:00:02.0: PCI INT A disabled [ 0.416232] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.416251] pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.416270] pci 0000:00:02.1: PCI INT B disabled [ 0.416316] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.416368] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.416430] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.416489] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.416555] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.416577] pci 0000:02:00.0: Boot video device [ 0.416587] PCI: CLS 32 bytes, default 64 [ 0.416920] Failed to setup IBS LVT offset, IBSCTL = 0xffffffff [ 0.416925] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu [ 0.416929] [Firmware Bug]: cpu 0, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100) [ 0.416932] Failed to setup IBS, -22 [ 0.417109] audit: initializing netlink socket (disabled) [ 0.417121] type=2000 audit(1335777805.412:1): initialized [ 0.451126] highmem bounce pool size: 64 pages [ 0.451133] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.468381] VFS: Disk quotas dquot_6.5.2 [ 0.468458] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.469134] fuse init (API version 7.17) [ 0.469266] msgmni has been set to 1602 [ 0.480201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.480245] io scheduler noop registered [ 0.480248] io scheduler deadline registered [ 0.480263] io scheduler cfq registered (default) [ 0.480385] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.480416] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.480487] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.480515] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.480677] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.480684] ACPI: Power Button [PWRB] [ 0.480748] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.480751] ACPI: Power Button [PWRF] [ 0.480811] ACPI: Fan [FAN] (on) [ 0.482456] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463) [ 0.482464] ACPI: [Package] has zero elements (f76aa340) [ 0.482466] ACPI: Invalid passive threshold [ 0.482650] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.482653] ACPI: Thermal Zone [THRM] (40 C) [ 0.482698] ERST: Table is not found! [ 0.482700] GHES: HEST is not enabled! [ 0.482780] isapnp: Scanning for PnP cards... [ 0.482818] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.790877] Freeing initrd memory: 19344k freed [ 0.835757] isapnp: No Plug & Play device found [ 0.928488] Linux agpgart interface v0.103 [ 0.930678] brd: module loaded [ 0.931712] loop: module loaded [ 0.931981] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.932209] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 0.932228] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 0.932249] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.932256] pata_acpi 0000:00:08.0: PCI INT A disabled [ 0.932729] Fixed MDIO Bus: probed [ 0.932755] tun: Universal TUN/TAP device driver, 1.6 [ 0.932758] tun: (C) 1999-2004 Max Krasnyansky [ 0.932821] PPP generic driver version 2.4.2 [ 0.932945] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.932960] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.932976] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.932980] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.933036] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.933057] ehci_hcd 0000:00:02.1: debug port 1 [ 0.933065] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported [ 0.933090] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 0.944031] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.944188] hub 1-0:1.0: USB hub found [ 0.944193] hub 1-0:1.0: 10 ports detected [ 0.944292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.944306] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.944315] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.944318] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.944373] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.944397] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 1.002151] hub 2-0:1.0: USB hub found [ 1.002159] hub 2-0:1.0: 10 ports detected [ 1.002256] uhci_hcd: USB Universal Host Controller Interface driver [ 1.002319] usbcore: registered new interface driver libusual [ 1.002370] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.002821] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.002830] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.003005] mousedev: PS/2 mouse device common for all mice [ 1.003187] rtc_cmos 00:05: RTC can wake from S4 [ 1.003336] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.003376] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.003450] device-mapper: uevent: version 1.0.3 [ 1.003543] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.003593] EISA: Probing bus 0 at eisa.0 [ 1.003596] EISA: Cannot allocate resource for mainboard [ 1.003599] Cannot allocate resource for EISA slot 1 [ 1.003601] Cannot allocate resource for EISA slot 2 [ 1.003603] Cannot allocate resource for EISA slot 3 [ 1.003605] Cannot allocate resource for EISA slot 4 [ 1.003607] Cannot allocate resource for EISA slot 5 [ 1.003609] Cannot allocate resource for EISA slot 6 [ 1.003611] Cannot allocate resource for EISA slot 7 [ 1.003613] Cannot allocate resource for EISA slot 8 [ 1.003615] EISA: Detected 0 cards. [ 1.003627] cpufreq-nforce2: No nForce2 chipset. [ 1.003630] cpuidle: using governor ladder [ 1.003632] cpuidle: using governor menu [ 1.003634] EFI Variables Facility v0.08 2004-May-17 [ 1.003935] TCP cubic registered [ 1.004091] NET: Registered protocol family 10 [ 1.004737] NET: Registered protocol family 17 [ 1.004755] Registering the dns_resolver key type [ 1.004779] Using IPI No-Shortcut mode [ 1.004903] PM: Hibernation image not present or could not be loaded. [ 1.004917] registered taskstats version 1 [ 1.019479] Magic number: 8:19:375 [ 1.019583] rtc_cmos 00:05: setting system clock to 2012-04-30 09:23:26 UTC (1335777806) [ 1.019598] powernow-k8: Found 1 AMD Phenom(tm) 8250e Triple-Core Processor (3 cpu cores) (version 2.20.00) [ 1.019630] powernow-k8: 0 : pstate 0 (1900 MHz) [ 1.019632] powernow-k8: 1 : pstate 1 (950 MHz) [ 1.019848] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.019851] EDD information not available. [ 1.020059] Freeing unused kernel memory: 740k freed [ 1.020438] Write protecting the kernel text: 5828k [ 1.020464] Write protecting the kernel read-only data: 2376k [ 1.020466] NX-protecting the kernel data: 4412k [ 1.040711] udevd[91]: starting version 175 [ 1.065659] pata_amd 0000:00:06.0: version 0.4.1 [ 1.065707] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.071596] scsi0 : pata_amd [ 1.071857] scsi1 : pata_amd [ 1.072374] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.072378] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.074034] sata_nv 0000:00:08.0: version 3.5 [ 1.074051] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 1.074096] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.078697] scsi2 : sata_nv [ 1.080685] scsi3 : sata_nv [ 1.080862] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20 [ 1.080866] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20 [ 1.080905] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.081092] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 1.081099] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 1.081105] forcedeth 0000:00:07.0: setting latency timer to 64 [ 1.239123] ata2: port disabled--ignoring [ 1.368024] usb 1-4: new high-speed USB device number 3 using ehci_hcd [ 1.416021] Refined TSC clocksource calibration: 1899.999 MHz. [ 1.416029] Switching to clocksource tsc [ 1.502945] Initializing USB Mass Storage driver... [ 1.503177] scsi4 : usb-storage 1-4:1.0 [ 1.503296] usbcore: registered new interface driver usb-storage [ 1.503299] USB Mass Storage support registered. [ 1.503303] usbcore: registered new interface driver uas [ 1.548038] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.556132] ata3.00: ATAPI: TSSTcorp CDDVDW TS-H653Q, 0303, max UDMA/33 [ 1.572138] ata3.00: configured for UDMA/33 [ 1.573030] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653Q 0303 PQ: 0 ANSI: 5 [ 1.576568] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.576572] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.576735] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.576866] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 1.608965] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 13, addr 00:22:15:f4:d8:68 [ 1.608970] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 1.724020] usb 1-9: new high-speed USB device number 5 using ehci_hcd [ 1.898284] ata4: SATA link down (SStatus 0 SControl 300) [ 1.900898] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 1.900919] firewire_ohci 0000:01:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 1.956060] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 2.136019] usb 1-10: new high-speed USB device number 6 using ehci_hcd [ 2.270243] scsi5 : usb-storage 1-10:1.0 [ 2.456093] firewire_core: created device fw0: GUID 001e8c00017b7bb8, S400 [ 2.501012] scsi 4:0:0:0: Direct-Access WD Elements 1023 2005 PQ: 0 ANSI: 4 [ 2.501837] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 2.502624] sd 4:0:0:0: [sda] 976769024 512-byte logical blocks: (500 GB/465 GiB) [ 2.503495] sd 4:0:0:0: [sda] Test WP failed, assume Write Enabled [ 2.504367] sd 4:0:0:0: [sda] Asking for cache data failed [ 2.504370] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 2.505991] sd 4:0:0:0: [sda] Test WP failed, assume Write Enabled [ 2.506866] sd 4:0:0:0: [sda] Asking for cache data failed [ 2.506869] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 2.508117] sda: sda1 sda2 < sda5 > [ 2.511242] sd 4:0:0:0: [sda] Test WP failed, assume Write Enabled [ 2.517744] sd 4:0:0:0: [sda] Asking for cache data failed [ 2.517747] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 2.517752] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.572014] usb 2-2: new full-speed USB device number 2 using ohci_hcd [ 2.794266] input: Sweex Wireless Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2 [ 2.794414] generic-usb 0003:177F:0402.0001: input,hidraw0: USB HID v1.10 Mouse [Sweex Wireless Mouse] on usb-0000:00:02.0-2/input0 [ 2.794437] usbcore: registered new interface driver usbhid [ 2.794439] usbhid: USB HID core driver [ 3.076023] usb 2-8: new full-speed USB device number 3 using ohci_hcd [ 3.216294] Btrfs loaded [ 3.268634] scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 3.269126] scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 3.269624] scsi 5:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 [ 3.270124] scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 3.270870] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 3.271073] sd 5:0:0:1: Attached scsi generic sg3 type 0 [ 3.272996] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 3.274141] sd 5:0:0:3: Attached scsi generic sg5 type 0 [ 3.283754] sd 5:0:0:2: [sdd] Attached SCSI removable disk [ 3.284376] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 3.284999] sd 5:0:0:1: [sdc] Attached SCSI removable disk [ 3.289377] sd 5:0:0:3: [sde] Attached SCSI removable disk [ 3.432884] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 26.206987] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.239327] udevd[467]: starting version 175 [ 26.308933] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.309340] lp: driver loaded but no devices found [ 26.314020] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 26.314075] i2c i2c-1: nForce2 SMBus adapter at 0x1c40 [ 26.318251] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 26.331000] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled [ 26.332810] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 26.350408] nvidia: module license 'NVIDIA' taints kernel. [ 26.350414] Disabling lock debugging due to kernel taint [ 26.446318] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 26.446327] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 26.446331] hda_intel: Disabling MSI [ 26.446358] snd_hda_intel 0000:00:05.0: setting latency timer to 64 [ 26.483244] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-8/input2 [ 26.484325] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 26.484372] nvidia 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 26.484381] nvidia 0000:02:00.0: setting latency timer to 64 [ 26.484388] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 26.484573] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012 [ 26.491033] input: Logitech Unifying Device. Wireless PID:400d as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.2/0003:046D:C52B.0004/input/input3 [ 26.491213] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400d] on usb-0000:00:02.0-8:2 [ 26.516758] type=1400 audit(1335777831.994:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=544 comm="apparmor_parser" [ 26.517308] type=1400 audit(1335777831.994:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=544 comm="apparmor_parser" [ 26.517628] type=1400 audit(1335777831.994:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser" [ 26.553883] Adding 12285948k swap on /dev/sda5. Priority:-1 extents:1 across:12285948k [ 26.661291] cfg80211: Calling CRDA to update world regulatory domain [ 26.725281] cfg80211: World regulatory domain updated: [ 26.725286] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.725290] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.725293] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.725297] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 26.725300] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.725303] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.796016] usb 1-9: reset high-speed USB device number 5 using ehci_hcd [ 26.933935] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 27.088013] hda_codec: ALC1200: SKU not ready 0x411111f0 [ 27.277856] init: failsafe main process (1094) killed by TERM signal [ 27.280686] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 27.280692] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280696] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 27.280700] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280703] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 27.280706] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280709] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 27.280712] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280715] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 27.280718] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280721] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 27.280724] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280727] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 27.280730] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280732] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 27.280736] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280738] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 27.280742] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280744] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 27.280748] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280750] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 27.280754] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.280756] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 27.280760] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.280762] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 27.280766] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.280768] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 27.280772] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.288854] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 27.289678] Registered led device: rt73usb-phy0::radio [ 27.289704] Registered led device: rt73usb-phy0::assoc [ 27.289730] Registered led device: rt73usb-phy0::quality [ 27.290290] usbcore: registered new interface driver rt73usb [ 27.360688] snd_hda_intel 0000:02:00.1: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 27.360693] hda_intel: Disabling MSI [ 27.360751] snd_hda_intel 0000:02:00.1: setting latency timer to 64 [ 27.365578] Bluetooth: Core ver 2.16 [ 27.365607] NET: Registered protocol family 31 [ 27.365610] Bluetooth: HCI device and connection manager initialized [ 27.365615] Bluetooth: HCI socket layer initialized [ 27.365617] Bluetooth: L2CAP socket layer initialized [ 27.365624] Bluetooth: SCO socket layer initialized [ 27.377776] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.377781] Bluetooth: BNEP filters: protocol multicast [ 27.391941] Bluetooth: RFCOMM TTY layer initialized [ 27.391949] Bluetooth: RFCOMM socket layer initialized [ 27.391951] Bluetooth: RFCOMM ver 1.11 [ 27.398065] type=1400 audit(1335777832.874:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1207 comm="apparmor_parser" [ 27.398775] type=1400 audit(1335777832.874:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1207 comm="apparmor_parser" [ 27.399093] type=1400 audit(1335777832.874:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1207 comm="apparmor_parser" [ 27.399899] ppdev: user-space parallel port driver [ 27.451414] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.457167] type=1400 audit(1335777832.934:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1205 comm="apparmor_parser" [ 27.462523] type=1400 audit(1335777832.938:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1206 comm="apparmor_parser" [ 27.474761] type=1400 audit(1335777832.950:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1225 comm="apparmor_parser" [ 27.474777] type=1400 audit(1335777832.950:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1219 comm="apparmor_parser" [ 27.677307] forcedeth 0000:00:07.0: irq 41 for MSI/MSI-X [ 28.169611] vboxdrv: Found 3 processor cores. [ 28.169779] vboxdrv: fAsync=0 offMin=0x3db offMax=0xee2 [ 28.169859] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 28.169861] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000). [ 28.182092] vboxpci: IOMMU not found (not registered) [ 28.184031] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 28.208041] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 28.232012] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 28.256074] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 28.256186] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input4 [ 28.256381] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input5 [ 28.256550] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input6 [ 28.256699] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input7 [ 28.605150] init: udev-fallback-graphics main process (1436) terminated with status 1 [ 28.617338] init: gdm main process (1463) killed by TERM signal [ 38.448008] eth0: no IPv6 routers present [ 38.528010] ham0: no IPv6 routers present [ 137.650376] exe (2775): /proc/2775/oom_adj is deprecated, please use /proc/2775/oom_score_adj instead. [24707.176052] usb 1-7: new high-speed USB device number 7 using ehci_hcd [24707.309857] scsi6 : usb-storage 1-7:1.0 [24708.308775] scsi 6:0:0:0: Direct-Access SONY "PSP" MS 1.00 PQ: 0 ANSI: 0 CCS [24708.309254] scsi 6:0:0:1: Direct-Access SONY "PSP" SS 1.00 PQ: 0 ANSI: 0 CCS [24708.310602] sd 6:0:0:0: Attached scsi generic sg6 type 0 [24708.315181] sd 6:0:0:1: Attached scsi generic sg7 type 0 [24708.320534] sd 6:0:0:1: [sdg] 30662080 512-byte logical blocks: (15.6 GB/14.6 GiB) [24708.321266] sd 6:0:0:0: [sdf] Attached SCSI removable disk [24708.321671] sd 6:0:0:1: [sdg] Write Protect is off [24708.321680] sd 6:0:0:1: [sdg] Mode Sense: 6d 00 00 00 [24708.322373] sd 6:0:0:1: [sdg] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [24708.330033] sdg: sdg1 [24708.333243] sd 6:0:0:1: [sdg] Attached SCSI removable disk [24725.580302] usb 1-7: USB disconnect, device number 7 [26014.704091] eth0: no IPv6 routers present