[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-45-generic (buildd@batsu) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #101-Ubuntu SMP Mon Dec 3 15:39:38 UTC 2012 (Ubuntu 2.6.32-45.101-generic 2.6.32.60+drm33.26) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-45-generic root=UUID=a9130b08-ceb4-43fb-847b-9fcc3321c166 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f692400 (usable) [ 0.000000] BIOS-e820: 000000007f692400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x7f692 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable [ 0.000000] 2 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007f692400 (usable) [ 0.000000] modified: 000000007f692400 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007f692000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007f600000 page 2M [ 0.000000] 007f600000 - 007f692000 page 4k [ 0.000000] kernel direct mapping tables up to 7f692000 @ 8000-c000 [ 0.000000] RAMDISK: 377f1000 - 37feff20 [ 0.000000] ACPI: RSDP 00000000000fbbf0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 000000007f693e00 0005C (v01 DELL M08 27D70802 ASL 00000061) [ 0.000000] ACPI: FACP 000000007f693c9c 000F4 (v04 DELL M08 27D70802 ASL 00000061) [ 0.000000] ACPI: DSDT 000000007f694400 0565E (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 000000007f6a2c00 00040 [ 0.000000] ACPI: HPET 000000007f693f00 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 000000007f694000 00068 (v01 DELL M08 27D70802 ASL 00000047) [ 0.000000] ACPI: MCFG 000000007f693fc0 0003E (v16 DELL M08 27D70802 ASL 00000061) [ 0.000000] ACPI: SLIC 000000007f69409c 00176 (v01 DELL M08 27D70802 ASL 00000061) [ 0.000000] ACPI: BOOT 000000007f693bc0 00028 (v01 DELL M08 27D70802 ASL 00000061) [ 0.000000] ACPI: SSDT 000000007f6925bc 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007f692000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007f692000 [ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff] [ 0.000000] bootmap [000000000000f000 - 000000000001eed7] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007f692000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a37a44] TEXT DATA BSS ==> [0001000000 - 0001a37a44] [ 0.000000] #3 [00377f1000 - 0037feff20] RAMDISK ==> [00377f1000 - 0037feff20] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0001a38000 - 0001a381ec] BRK ==> [0001a38000 - 0001a381ec] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f692 [ 0.000000] On node 0 totalpages: 521772 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7079 pages used for memmap [ 0.000000] DMA32 zone: 510699 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91608 r8192 d23080 u1048576 [ 0.000000] pcpu-alloc: s91608 r8192 d23080 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514535 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-45-generic root=UUID=a9130b08-ceb4-43fb-847b-9fcc3321c166 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2039344k/2087496k available (5442k kernel code, 408k absent, 47744k reserved, 2984k data, 884k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.961 MHz processor. [ 0.010012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.92 BogoMIPS (lpj=19949610) [ 0.010069] Security Framework initialized [ 0.010111] AppArmor: AppArmor initialized [ 0.020271] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.022268] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.023171] Mount-cache hash table entries: 256 [ 0.023482] Initializing cgroup subsys ns [ 0.023495] Initializing cgroup subsys cpuacct [ 0.023503] Initializing cgroup subsys memory [ 0.023519] Initializing cgroup subsys devices [ 0.023525] Initializing cgroup subsys freezer [ 0.023531] Initializing cgroup subsys net_cls [ 0.023578] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.023585] CPU: L2 cache: 2048K [ 0.023593] CPU 0/0x0 -> Node 0 [ 0.023599] CPU: Physical Processor ID: 0 [ 0.023603] CPU: Processor Core ID: 0 [ 0.023611] mce: CPU supports 6 MCE banks [ 0.023627] CPU0: Thermal monitoring enabled (TM2) [ 0.023638] using mwait in idle threads. [ 0.023641] Performance Events: Core2 events, Intel PMU driver. [ 0.023655] ... version: 2 [ 0.023660] ... bit width: 40 [ 0.023662] ... generic registers: 2 [ 0.023667] ... value mask: 000000ffffffffff [ 0.023672] ... max period: 000000007fffffff [ 0.023675] ... fixed-purpose events: 3 [ 0.023680] ... event mask: 0000000700000003 [ 0.029901] ACPI: Core revision 20090903 [ 0.047951] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.047964] ftrace: allocating 22596 entries in 89 pages [ 0.050132] Setting APIC routing to flat [ 0.050635] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.152093] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 2048K [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] CPU1: Thermal monitoring enabled (TM2) [ 0.310153] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 0.310169] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.320040] Brought up 2 CPUs [ 0.320046] Total of 2 processors activated (7980.26 BogoMIPS). [ 0.321523] CPU0 attaching sched-domain: [ 0.321532] domain 0: span 0-1 level MC [ 0.321538] groups: 0 1 [ 0.321551] CPU1 attaching sched-domain: [ 0.321557] domain 0: span 0-1 level MC [ 0.321561] groups: 1 0 [ 0.321701] devtmpfs: initialized [ 0.321701] regulator: core version 0.5 [ 0.321701] Time: 23:15:46 Date: 12/14/12 [ 0.321701] NET: Registered protocol family 16 [ 0.321701] Trying to unpack rootfs image as initramfs... [ 0.321701] ACPI: bus type pci registered [ 0.321701] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.321701] PCI: MCFG area at f8000000 reserved in E820 [ 0.322998] PCI: Using MMCONFIG at f8000000 - fbffffff [ 0.323003] PCI: Using configuration type 1 for base access [ 0.330163] bio: create slab at 0 [ 0.332092] ACPI: EC: Look up EC in DSDT [ 0.387334] ACPI: Interpreter enabled [ 0.387344] ACPI: (supports S0 S3 S4 S5) [ 0.387397] ACPI: Using IOAPIC for interrupt routing [ 0.468767] ACPI: No dock devices found. [ 0.506899] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.507160] pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff] [ 0.507178] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.507190] pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef] [ 0.507290] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff] [ 0.507510] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] [ 0.507632] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] [ 0.507766] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] [ 0.507908] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.507920] pci 0000:00:1a.7: PME# disabled [ 0.508016] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] [ 0.508161] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.508170] pci 0000:00:1b.0: PME# disabled [ 0.508379] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.508388] pci 0000:00:1c.0: PME# disabled [ 0.508602] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.508613] pci 0000:00:1c.1: PME# disabled [ 0.508831] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.508841] pci 0000:00:1c.3: PME# disabled [ 0.508961] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] [ 0.509085] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] [ 0.509207] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] [ 0.509338] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] [ 0.509478] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.509490] pci 0000:00:1d.7: PME# disabled [ 0.509817] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.509830] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.509838] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.509851] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.509970] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.509987] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.510025] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.510040] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.510055] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] [ 0.510169] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] [ 0.510184] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] [ 0.510199] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] [ 0.510214] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] [ 0.510229] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eef] [ 0.510243] pci 0000:00:1f.2: reg 24 io port: [0xeff0-0xefff] [ 0.510317] pci 0000:00:1f.2: PME# supported from D3hot [ 0.510326] pci 0000:00:1f.2: PME# disabled [ 0.510378] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fbf00-0xfe9fbfff] [ 0.510425] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] [ 0.510835] pci 0000:0c:00.0: reg 10 32bit mmio: [0xfe8fc000-0xfe8fffff] [ 0.511364] pci 0000:0c:00.0: supports D1 D2 [ 0.511562] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.511678] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.511689] pci 0000:00:1c.3: bridge 32bit mmio: [0xfe600000-0xfe7fffff] [ 0.511704] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] [ 0.511780] pci 0000:03:00.0: reg 10 32bit mmio: [0xfe5fe000-0xfe5fffff] [ 0.511901] pci 0000:03:00.0: supports D1 D2 [ 0.511906] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.511915] pci 0000:03:00.0: PME# disabled [ 0.511990] pci 0000:03:01.0: reg 10 32bit mmio: [0xfe5fd800-0xfe5fdfff] [ 0.512116] pci 0000:03:01.0: supports D1 D2 [ 0.512121] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.512130] pci 0000:03:01.0: PME# disabled [ 0.512207] pci 0000:03:01.1: reg 10 32bit mmio: [0xfe5fd400-0xfe5fd4ff] [ 0.512332] pci 0000:03:01.1: supports D1 D2 [ 0.512336] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.512347] pci 0000:03:01.1: PME# disabled [ 0.512422] pci 0000:03:01.2: reg 10 32bit mmio: [0xfe5fd500-0xfe5fd5ff] [ 0.512548] pci 0000:03:01.2: supports D1 D2 [ 0.512552] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.512563] pci 0000:03:01.2: PME# disabled [ 0.512638] pci 0000:03:01.3: reg 10 32bit mmio: [0xfe5fd600-0xfe5fd6ff] [ 0.512760] pci 0000:03:01.3: supports D1 D2 [ 0.512765] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.512774] pci 0000:03:01.3: PME# disabled [ 0.512854] pci 0000:03:01.4: reg 10 32bit mmio: [0xfe5fd700-0xfe5fd7ff] [ 0.512978] pci 0000:03:01.4: supports D1 D2 [ 0.512982] pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.512993] pci 0000:03:01.4: PME# disabled [ 0.513117] pci 0000:00:1e.0: transparent bridge [ 0.513131] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe500000-0xfe5fffff] [ 0.513198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.513858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.514191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.514370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.514553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.548205] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.548497] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.548782] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 0.549067] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 0.549352] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.549644] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.549935] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.550229] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.550544] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.550591] vgaarb: loaded [ 0.550848] SCSI subsystem initialized [ 0.551050] libata version 3.00 loaded. [ 0.551223] usbcore: registered new interface driver usbfs [ 0.551257] usbcore: registered new interface driver hub [ 0.551325] usbcore: registered new device driver usb [ 0.551692] ACPI: WMI: Mapper loaded [ 0.551698] PCI: Using ACPI for IRQ routing [ 0.552136] NetLabel: Initializing [ 0.552142] NetLabel: domain hash size = 128 [ 0.552144] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.552177] NetLabel: unlabeled traffic allowed by default [ 0.552253] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.552265] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.552277] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.560121] Switching to clocksource tsc [ 0.564319] AppArmor: AppArmor Filesystem Enabled [ 0.564356] pnp: PnP ACPI init [ 0.564387] ACPI: bus type pnp registered [ 0.604770] pnp 00:09: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.604780] pnp 00:09: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.605040] pnp 00:0a: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.605048] pnp 00:0a: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.605056] pnp 00:0a: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.605064] pnp 00:0a: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.654839] pnp: PnP ACPI: found 12 devices [ 0.654847] ACPI: ACPI bus type pnp unregistered [ 0.654884] system 00:05: ioport range 0xc80-0xcff could not be reserved [ 0.654905] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.654920] system 00:09: ioport range 0x900-0x97f has been reserved [ 0.654927] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.654944] system 00:0a: ioport range 0xf400-0xf4fe has been reserved [ 0.654951] system 00:0a: ioport range 0x1080-0x10bf has been reserved [ 0.654958] system 00:0a: ioport range 0x10c0-0x10df has been reserved [ 0.654965] system 00:0a: ioport range 0x809-0x809 has been reserved [ 0.654980] system 00:0b: iomem range 0x0-0x9efff could not be reserved [ 0.654987] system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved [ 0.654993] system 00:0b: iomem range 0xc0000-0xcffff has been reserved [ 0.655000] system 00:0b: iomem range 0xe0000-0xfffff has been reserved [ 0.655007] system 00:0b: iomem range 0x100000-0x7f6923ff could not be reserved [ 0.655014] system 00:0b: iomem range 0x7f692400-0x7f6fffff has been reserved [ 0.655021] system 00:0b: iomem range 0x7f700000-0x7f7fffff has been reserved [ 0.655028] system 00:0b: iomem range 0x7f700000-0x7fefffff could not be reserved [ 0.655035] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved [ 0.655042] system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved [ 0.655049] system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.655056] system 00:0b: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.655065] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.655072] system 00:0b: iomem range 0xfeda0000-0xfeda3fff has been reserved [ 0.655087] system 00:0b: iomem range 0xfeda4000-0xfeda4fff has been reserved [ 0.655094] system 00:0b: iomem range 0xfeda5000-0xfeda5fff has been reserved [ 0.655101] system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved [ 0.655108] system 00:0b: iomem range 0xfed18000-0xfed1bfff has been reserved [ 0.655115] system 00:0b: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.660222] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b [ 0.660231] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.660244] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff [ 0.660254] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff [ 0.660272] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c [ 0.660279] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.660292] pci 0000:00:1c.1: MEM window: 0xfe800000-0xfe8fffff [ 0.660301] pci 0000:00:1c.1: PREFETCH window: 0x00000080400000-0x000000805fffff [ 0.660317] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d [ 0.660326] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.660337] pci 0000:00:1c.3: MEM window: 0xfe600000-0xfe7fffff [ 0.660348] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 0.660364] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.660370] pci 0000:00:1e.0: IO window: disabled [ 0.660382] pci 0000:00:1e.0: MEM window: 0xfe500000-0xfe5fffff [ 0.660391] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.660428] alloc irq_desc for 16 on node -1 [ 0.660434] alloc kstat_irqs on node -1 [ 0.660448] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.660460] pci 0000:00:1c.0: setting latency timer to 64 [ 0.660480] alloc irq_desc for 17 on node -1 [ 0.660483] alloc kstat_irqs on node -1 [ 0.660493] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.660502] pci 0000:00:1c.1: setting latency timer to 64 [ 0.660522] alloc irq_desc for 19 on node -1 [ 0.660525] alloc kstat_irqs on node -1 [ 0.660534] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.660543] pci 0000:00:1c.3: setting latency timer to 64 [ 0.660562] pci 0000:00:1e.0: setting latency timer to 64 [ 0.660570] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.660577] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.660583] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] [ 0.660590] pci_bus 0000:0b: resource 1 mem: [0x80000000-0x801fffff] [ 0.660596] pci_bus 0000:0b: resource 2 pref mem [0x80200000-0x803fffff] [ 0.660602] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff] [ 0.660606] pci_bus 0000:0c: resource 1 mem: [0xfe800000-0xfe8fffff] [ 0.660612] pci_bus 0000:0c: resource 2 pref mem [0x80400000-0x805fffff] [ 0.660618] pci_bus 0000:0d: resource 0 io: [0xd000-0xdfff] [ 0.660624] pci_bus 0000:0d: resource 1 mem: [0xfe600000-0xfe7fffff] [ 0.660631] pci_bus 0000:0d: resource 2 pref mem [0xf0000000-0xf01fffff] [ 0.660637] pci_bus 0000:03: resource 1 mem: [0xfe500000-0xfe5fffff] [ 0.660643] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.660647] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.660739] NET: Registered protocol family 2 [ 0.661056] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.662873] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.666512] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.667385] TCP: Hash tables configured (established 262144 bind 65536) [ 0.667391] TCP reno registered [ 0.667617] NET: Registered protocol family 1 [ 0.667660] pci 0000:00:02.0: Boot video device [ 0.667692] alloc irq_desc for 20 on node -1 [ 0.667695] alloc kstat_irqs on node -1 [ 0.667714] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.667748] pci 0000:00:1a.0: PCI INT A disabled [ 0.667762] alloc irq_desc for 21 on node -1 [ 0.667765] alloc kstat_irqs on node -1 [ 0.667775] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.667806] pci 0000:00:1a.1: PCI INT B disabled [ 0.667833] alloc irq_desc for 22 on node -1 [ 0.667838] alloc kstat_irqs on node -1 [ 0.667846] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.667901] pci 0000:00:1a.7: PCI INT C disabled [ 0.667932] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.667964] pci 0000:00:1d.0: PCI INT A disabled [ 0.667979] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.668016] pci 0000:00:1d.1: PCI INT B disabled [ 0.668031] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.668062] pci 0000:00:1d.2: PCI INT C disabled [ 0.668085] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.668118] pci 0000:00:1d.7: PCI INT A disabled [ 0.668247] Simple Boot Flag at 0x79 set to 0x1 [ 0.668682] Scanning for low memory corruption every 60 seconds [ 0.669032] audit: initializing netlink socket (disabled) [ 0.669054] type=2000 audit(1355526946.500:1): initialized [ 0.692580] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.696100] VFS: Disk quotas dquot_6.5.2 [ 0.696240] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.697707] fuse init (API version 7.13) [ 0.697904] msgmni has been set to 3983 [ 0.698384] alg: No test for stdrng (krng) [ 0.698523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.698530] io scheduler noop registered [ 0.698533] io scheduler anticipatory registered [ 0.698538] io scheduler deadline registered [ 0.698686] io scheduler cfq registered (default) [ 0.699074] alloc irq_desc for 24 on node -1 [ 0.699080] alloc kstat_irqs on node -1 [ 0.699103] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.699124] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.699413] alloc irq_desc for 25 on node -1 [ 0.699418] alloc kstat_irqs on node -1 [ 0.699437] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.699458] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.699742] alloc irq_desc for 26 on node -1 [ 0.699747] alloc kstat_irqs on node -1 [ 0.699765] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X [ 0.699786] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.699996] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.700224] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.700512] ACPI: AC Adapter [AC] (off-line) [ 0.700728] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.701567] ACPI: Lid Switch [LID] [ 0.701683] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.701696] ACPI: Power Button [PBTN] [ 0.701798] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.701804] ACPI: Sleep Button [SBTN] [ 0.703312] ACPI: SSDT 000000007f6930f2 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.704346] ACPI: SSDT 000000007f692a88 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.705199] Monitor-Mwait will be used to enter C-1 state [ 0.705267] Monitor-Mwait will be used to enter C-2 state [ 0.705327] Monitor-Mwait will be used to enter C-3 state [ 0.705347] Marking TSC unstable due to TSC halts in idle [ 0.705464] processor LNXCPU:00: registered as cooling_device0 [ 0.706241] ACPI: SSDT 000000007f693378 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.706953] ACPI: SSDT 000000007f69306d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.707543] Switching to clocksource hpet [ 0.723061] processor LNXCPU:01: registered as cooling_device1 [ 0.742744] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.742770] ACPI: Thermal Zone [THM] (25 C) [ 0.746253] Linux agpgart interface v0.103 [ 0.746357] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.749379] brd: module loaded [ 0.750560] loop: module loaded [ 0.750759] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.750974] ata_piix 0000:00:1f.1: version 2.13 [ 0.751001] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.751079] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.751244] scsi0 : ata_piix [ 0.751406] scsi1 : ata_piix [ 0.798299] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 0.798309] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 0.798386] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.798400] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.809198] ACPI: Battery Slot [BAT0] (battery present) [ 0.810542] ata2: port disabled. ignoring. [ 0.878635] Freeing initrd memory: 8187k freed [ 0.950117] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.950328] scsi2 : ata_piix [ 0.950519] scsi3 : ata_piix [ 0.951984] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17 [ 0.951998] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17 [ 0.952848] Fixed MDIO Bus: probed [ 0.952932] PPP generic driver version 2.4.2 [ 0.953066] tun: Universal TUN/TAP device driver, 1.6 [ 0.953071] tun: (C) 1999-2004 Max Krasnyansky [ 0.953284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.953329] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.953366] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.953374] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.953455] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.953534] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.957441] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.957468] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 0.980030] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.980225] usb usb1: configuration #1 chosen from 1 choice [ 0.980299] hub 1-0:1.0: USB hub found [ 0.980315] hub 1-0:1.0: 4 ports detected [ 0.980424] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.980450] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.980457] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.980531] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.980602] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.983163] ata1.00: ATAPI: Optiarc DVD+/-RW AD-5560A, DD11, max UDMA/33 [ 0.984512] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.984538] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 1.000036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.000205] usb usb2: configuration #1 chosen from 1 choice [ 1.000266] hub 2-0:1.0: USB hub found [ 1.000281] hub 2-0:1.0: 6 ports detected [ 1.000423] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.000463] uhci_hcd: USB Universal Host Controller Interface driver [ 1.000536] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.000552] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.000559] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.000640] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.000688] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 1.000897] usb usb3: configuration #1 chosen from 1 choice [ 1.000963] hub 3-0:1.0: USB hub found [ 1.000977] hub 3-0:1.0: 2 ports detected [ 1.001074] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.001092] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.001099] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.001170] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.001231] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 1.001462] usb usb4: configuration #1 chosen from 1 choice [ 1.001521] hub 4-0:1.0: USB hub found [ 1.001535] hub 4-0:1.0: 2 ports detected [ 1.001638] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.001656] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.001663] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.001752] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.001800] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 1.002012] usb usb5: configuration #1 chosen from 1 choice [ 1.002071] hub 5-0:1.0: USB hub found [ 1.002085] hub 5-0:1.0: 2 ports detected [ 1.002185] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.002202] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.002210] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.002278] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.002327] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 1.002534] usb usb6: configuration #1 chosen from 1 choice [ 1.002599] hub 6-0:1.0: USB hub found [ 1.002613] hub 6-0:1.0: 2 ports detected [ 1.002771] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.002788] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.002796] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.002869] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.002914] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.003119] usb usb7: configuration #1 chosen from 1 choice [ 1.003178] hub 7-0:1.0: USB hub found [ 1.003192] hub 7-0:1.0: 2 ports detected [ 1.003404] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.006341] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.006355] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.006537] mice: PS/2 mouse device common for all mice [ 1.006803] rtc_cmos 00:03: RTC can wake from S4 [ 1.006909] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.006961] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.007268] device-mapper: uevent: version 1.0.3 [ 1.007516] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.007729] device-mapper: multipath: version 1.1.0 loaded [ 1.007736] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.008308] cpuidle: using governor ladder [ 1.008584] cpuidle: using governor menu [ 1.009402] TCP cubic registered [ 1.009782] NET: Registered protocol family 10 [ 1.010347] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.011467] NET: Registered protocol family 17 [ 1.018099] PM: Resume from disk failed. [ 1.018140] registered taskstats version 1 [ 1.019421] Magic number: 8:250:302 [ 1.019486] tty tty31: hash matches [ 1.019682] rtc_cmos 00:03: setting system clock to 2012-12-14 23:15:47 UTC (1355526947) [ 1.019693] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.019700] EDD information not available. [ 1.023291] ata1.00: configured for UDMA/33 [ 1.025269] scsi 0:0:0:0: CD-ROM Optiarc DVD+-RW AD-5560A DD11 PQ: 0 ANSI: 5 [ 1.032436] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.032449] Uniform CD-ROM driver Revision: 3.20 [ 1.032833] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.033011] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.810262] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.810290] ata3.01: SATA link down (SStatus 0 SControl 300) [ 1.831290] ata3.00: failed to set max address (err_mask=0x1) [ 1.831299] ata3.00: device aborted resize (192426570 -> 195371568), skipping HPA handling [ 1.831312] ata3.00: ATA-7: Hitachi HTS721010G9SA00, MCZOC10H, max UDMA/100 [ 1.831322] ata3.00: 192426570 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 1.870626] ata3.00: configured for UDMA/100 [ 1.870951] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72101 MCZO PQ: 0 ANSI: 5 [ 1.871270] sd 2:0:0:0: [sda] 192426570 512-byte logical blocks: (98.5 GB/91.7 GiB) [ 1.871289] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.871393] sd 2:0:0:0: [sda] Write Protect is off [ 1.871400] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.871521] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.872061] sda: sda1 sda2 < sda5 sda6 > [ 2.216892] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.370155] ata4.01: failed to resume link (SControl 0) [ 2.370227] ata4.00: SATA link down (SStatus 0 SControl 300) [ 2.370259] ata4.01: SATA link down (SStatus 0 SControl 0) [ 2.370406] Freeing unused kernel memory: 884k freed [ 2.371028] Write protecting the kernel read-only data: 7720k [ 2.408851] udev: starting version 151 [ 2.734940] ohci1394 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.794653] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fe5fd800-fe5fdfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.907550] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 4.110683] ieee1394: Host added: ID:BUS[0-00:1023] GUID[424fc000005b2da1] [ 13.437376] udev: starting version 151 [ 13.529416] Adding 3956728k swap on /dev/sda5. Priority:-1 extents:1 across:3956728k [ 13.533529] lp: driver loaded but no devices found [ 13.552057] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 13.552661] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 13.557277] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 13.732772] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 13.735684] lib80211: common routines for IEEE802.11 drivers [ 13.735687] lib80211_crypt: registered algorithm 'NULL' [ 13.743026] sdhci: Secure Digital Host Controller Interface driver [ 13.743029] sdhci: Copyright(c) Pierre Ossman [ 13.744284] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) [ 13.744303] alloc irq_desc for 18 on node -1 [ 13.744305] alloc kstat_irqs on node -1 [ 13.744312] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 13.746390] Registered led device: mmc0:: [ 13.749007] ricoh-mmc: Ricoh MMC Controller disabling driver [ 13.749009] ricoh-mmc: Copyright(c) Philip Langdale [ 13.749220] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA [ 13.749240] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12) [ 13.749259] ricoh-mmc: Controller is now disabled. [ 13.751195] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 13.752793] [drm] Initialized drm 1.1.0 20060810 [ 13.821153] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.821159] i915 0000:00:02.0: setting latency timer to 64 [ 13.828734] wl: module license 'MIXED/Proprietary' taints kernel. [ 13.828739] Disabling lock debugging due to kernel taint [ 13.833569] alloc irq_desc for 27 on node -1 [ 13.833573] alloc kstat_irqs on node -1 [ 13.833582] i915 0000:00:02.0: irq 27 for MSI/MSI-X [ 13.833589] [drm] set up 7M of stolen space [ 13.834906] type=1505 audit(1355526960.180:2): operation="profile_load" pid=680 name="/sbin/dhclient3" [ 13.835623] type=1505 audit(1355526960.180:3): operation="profile_load" pid=680 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.836018] type=1505 audit(1355526960.180:4): operation="profile_load" pid=680 name="/usr/lib/connman/scripts/dhclient-script" [ 13.837808] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 13.837826] wl 0000:0c:00.0: setting latency timer to 64 [ 13.851924] lib80211_crypt: registered algorithm 'TKIP' [ 13.852087] eth0: Broadcom BCM4311 802.11 Hybrid Wireless Controller 5.60.48.36 [ 13.866713] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 13.967638] composite sync not supported [ 13.967770] [drm] initialized overlay support [ 13.982905] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 13.983651] b44.c:v2.0 [ 14.052612] eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1d:09:b6:79:39 [ 14.062862] udev: renamed network interface eth0 to eth2 [ 14.107829] udev: renamed network interface eth1_rename to eth0 [ 14.374607] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0 [ 14.374612] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 14.394887] composite sync not supported [ 14.411644] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 14.466130] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 14.467251] SGI XFS Quota Management subsystem [ 14.473803] XFS mounting filesystem sda6 [ 14.547287] fb0: inteldrmfb frame buffer device [ 14.547290] registered panic notifier [ 14.561505] acpi device:34: registered as cooling_device2 [ 14.562450] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input7 [ 14.562805] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 14.562875] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 14.562951] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input8 [ 14.562987] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 14.563016] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 14.563066] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.563097] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.565398] vga16fb: initializing [ 14.565402] vga16fb: mapped to 0xffff8800000a0000 [ 14.565406] vga16fb: not registering due to another framebuffer present [ 14.775185] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 14.830601] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.830797] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 14.835614] Console: switching to colour frame buffer device 160x50 [ 14.974484] composite sync not supported [ 15.107557] Ending clean XFS mount for filesystem: sda6 [ 15.685785] type=1505 audit(1355526961.681:5): operation="profile_replace" pid=969 name="/sbin/dhclient3" [ 15.686515] type=1505 audit(1355526961.681:6): operation="profile_replace" pid=969 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.686917] type=1505 audit(1355526961.681:7): operation="profile_replace" pid=969 name="/usr/lib/connman/scripts/dhclient-script" [ 15.689184] type=1505 audit(1355526961.681:8): operation="profile_load" pid=968 name="/usr/share/gdm/guest-session/Xsession" [ 15.697197] type=1505 audit(1355526961.681:9): operation="profile_load" pid=970 name="/usr/bin/evince" [ 15.704026] type=1505 audit(1355526962.180:10): operation="profile_load" pid=972 name="/usr/lib/cups/backend/cups-pdf" [ 15.704896] type=1505 audit(1355526962.180:11): operation="profile_load" pid=972 name="/usr/sbin/cupsd" [ 15.840887] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.139748] composite sync not supported [ 16.704495] composite sync not supported [ 18.269976] ppdev: user-space parallel port driver [ 18.421908] composite sync not supported [ 18.924600] composite sync not supported [ 19.441853] composite sync not supported [ 20.602550] composite sync not supported [ 26.140072] eth2: no IPv6 routers present [ 37.151908] composite sync not supported [ 37.660723] composite sync not supported [ 38.151833] composite sync not supported [ 39.298388] composite sync not supported [ 39.959969] composite sync not supported [ 43.875410] composite sync not supported [ 516.625500] composite sync not supported [ 519.533001] b44: eth0: powering down PHY [ 520.146223] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 520.146226] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 520.146231] PM: Basic memory bitmaps created [ 520.146232] PM: Syncing filesystems ... done. [ 520.149324] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 520.150713] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 520.150811] PM: Preallocating image memory... done (allocated 389594 pages) [ 525.224850] PM: Allocated 1558376 kbytes in 5.07 seconds (307.37 MB/s) [ 525.224852] Suspending console(s) (use no_console_suspend to debug) [ 525.432755] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 525.432945] PM: freeze of drv:sd dev:2:0:0:0 complete after 207.510 msecs [ 525.434740] ACPI handle has no context! [ 525.434748] sdhci-pci 0000:03:01.1: PCI INT B disabled [ 525.434754] ACPI handle has no context! [ 525.472813] b44 0000:03:00.0: PCI INT A disabled [ 525.472822] ACPI handle has no context! [ 525.493012] wl 0000:0c:00.0: PCI INT A disabled [ 525.512974] ata_piix 0000:00:1f.2: PCI INT B disabled [ 525.513094] ata2: port disabled. ignoring. [ 525.513156] ata_piix 0000:00:1f.1: PCI INT A disabled [ 525.620315] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 525.640256] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 127.062 msecs [ 525.667315] PM: freeze of devices complete after 442.088 msecs [ 525.667769] ricoh-mmc: Suspending. [ 525.667778] ricoh-mmc: Controller is now re-enabled. [ 525.668351] PM: late freeze of devices complete after 1.032 msecs [ 525.670695] ACPI: Preparing to enter system sleep state S4 [ 525.672393] PM: Saving platform NVS memory [ 525.672496] Disabling non-boot CPUs ... [ 525.672523] CPU0 attaching NULL sched-domain. [ 525.672526] CPU1 attaching NULL sched-domain. [ 525.742519] CPU0 attaching NULL sched-domain. [ 525.743618] Broke affinity for irq 1 [ 525.743638] Broke affinity for irq 12 [ 525.743665] Broke affinity for irq 17 [ 525.850018] CPU 1 is now offline [ 525.850022] SMP alternatives: switching to UP code [ 525.856886] Extended CMOS year: 2000 [ 525.856986] PM: Creating hibernation image: [ 525.860007] PM: Need to copy 122734 pages [ 525.860007] PM: Normal pages needed: 122734 + 1024, available pages: 399003 [ 525.860007] PM: Restoring platform NVS memory [ 525.860007] CPU0: Thermal monitoring enabled (TM2) [ 525.860007] Extended CMOS year: 2000 [ 525.860007] Enabling non-boot CPUs ... [ 525.860007] SMP alternatives: switching to SMP code [ 525.863546] Booting processor 1 APIC 0x1 ip 0x6000 [ 525.860007] Initializing CPU#1 [ 525.860007] CPU: L1 I cache: 32K, L1 D cache: 32K [ 525.860007] CPU: L2 cache: 2048K [ 525.860007] CPU 1/0x1 -> Node 0 [ 525.860007] CPU: Physical Processor ID: 0 [ 525.860007] CPU: Processor Core ID: 1 [ 525.860007] CPU1: Thermal monitoring enabled (TM2) [ 526.020070] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 526.020139] CPU0 attaching NULL sched-domain. [ 526.090029] CPU0 attaching sched-domain: [ 526.090032] domain 0: span 0-1 level MC [ 526.090034] groups: 0 1 [ 526.090039] CPU1 attaching sched-domain: [ 526.090040] domain 0: span 0-1 level MC [ 526.090043] groups: 1 0 [ 526.090723] CPU1 is up [ 526.091514] ACPI: Waking up from system sleep state S4 [ 526.100122] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 526.100312] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 526.100815] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005) [ 526.100857] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007) [ 526.101298] ricoh-mmc: Resuming. [ 526.101307] ricoh-mmc: Controller is now disabled. [ 526.120017] __ratelimit: 9 callbacks suppressed [ 526.120020] pci 0000:03:01.4: Refused to change power state, currently in D3 [ 526.120455] PM: early restore of devices complete after 20.513 msecs [ 526.198235] i915 0000:00:02.0: setting latency timer to 64 [ 527.122890] PM: restore of drv:i915 dev:0000:00:02.0 complete after 924.657 msecs [ 527.122902] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 527.122943] usb usb3: root hub lost power or was reset [ 527.122970] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 527.123009] usb usb4: root hub lost power or was reset [ 527.123029] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 527.123035] usb usb1: root hub lost power or was reset [ 527.126905] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 527.126920] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 527.126927] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 527.126961] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 527.127000] usb usb5: root hub lost power or was reset [ 527.127021] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 527.127059] usb usb6: root hub lost power or was reset [ 527.127079] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 527.127118] usb usb7: root hub lost power or was reset [ 527.127139] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 527.127144] usb usb2: root hub lost power or was reset [ 527.131023] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 527.131035] pci 0000:00:1e.0: setting latency timer to 64 [ 527.131050] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 527.131055] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 527.131081] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 527.131087] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 527.131102] ata1.00: _GTF evaluation failed (AE 0x1001) [ 527.131113] ata3.00: _GTF evaluation failed (AE 0x1001) [ 527.131177] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 527.131197] wl 0000:0c:00.0: setting latency timer to 64 [ 527.131449] ata2: port disabled. ignoring. [ 527.151417] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 527.254769] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fe5fd800-fe5fdfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 527.260869] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 527.350529] ata1.00: configured for UDMA/33 [ 527.412760] PM: restore of drv:usb dev:usb1 complete after 150.342 msecs [ 527.562762] PM: restore of drv:usb dev:usb2 complete after 149.983 msecs [ 527.563557] sd 2:0:0:0: [sda] Starting disk [ 527.990306] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 527.990328] ata3.01: SATA link down (SStatus 0 SControl 300) [ 528.050584] ata3.00: configured for UDMA/100 [ 528.392373] PM: restore of drv:sd dev:2:0:0:0 complete after 828.815 msecs [ 528.430169] PM: restore of devices complete after 2272.028 msecs [ 528.430432] PM: Image restored successfully. [ 528.430434] Restarting tasks ... done. [ 528.433879] PM: Basic memory bitmaps freed [ 528.550026] ata4.01: failed to resume link (SControl 0) [ 528.550081] ata4.00: SATA link down (SStatus 0 SControl 300) [ 528.550103] ata4.01: SATA link down (SStatus 0 SControl 0) [ 552.517752] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 562.680237] eth2: no IPv6 routers present [ 1741.433341] composite sync not supported [ 1744.272992] b44: eth0: powering down PHY [ 1745.178037] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 1745.178041] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 1745.178046] PM: Basic memory bitmaps created [ 1745.178047] PM: Syncing filesystems ... done. [ 1745.229497] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 1745.230879] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 1745.230983] PM: Preallocating image memory... done (allocated 389594 pages) [ 1755.720346] PM: Allocated 1558376 kbytes in 10.48 seconds (148.70 MB/s) [ 1755.720349] Suspending console(s) (use no_console_suspend to debug) [ 1755.930220] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 1755.930359] PM: freeze of drv:sd dev:2:0:0:0 complete after 209.427 msecs [ 1755.932115] ACPI handle has no context! [ 1755.932123] sdhci-pci 0000:03:01.1: PCI INT B disabled [ 1755.932129] ACPI handle has no context! [ 1755.970283] b44 0000:03:00.0: PCI INT A disabled [ 1755.970291] ACPI handle has no context! [ 1755.990473] wl 0000:0c:00.0: PCI INT A disabled [ 1756.010476] ata_piix 0000:00:1f.2: PCI INT B disabled [ 1756.010591] ata2: port disabled. ignoring. [ 1756.010652] ata_piix 0000:00:1f.1: PCI INT A disabled [ 1756.010700] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 1756.049598] PM: freeze of devices complete after 328.878 msecs [ 1756.050081] ricoh-mmc: Suspending. [ 1756.050090] ricoh-mmc: Controller is now re-enabled. [ 1756.050838] PM: late freeze of devices complete after 1.235 msecs [ 1756.053227] ACPI: Preparing to enter system sleep state S4 [ 1756.055027] PM: Saving platform NVS memory [ 1756.055130] Disabling non-boot CPUs ... [ 1756.055147] CPU0 attaching NULL sched-domain. [ 1756.055150] CPU1 attaching NULL sched-domain. [ 1756.182522] CPU0 attaching NULL sched-domain. [ 1756.290030] CPU 1 is now offline [ 1756.290034] SMP alternatives: switching to UP code [ 1756.296984] Extended CMOS year: 2000 [ 1756.297084] PM: Creating hibernation image: [ 1756.300009] PM: Need to copy 102832 pages [ 1756.300009] PM: Normal pages needed: 102832 + 1024, available pages: 418905 [ 1756.300009] PM: Restoring platform NVS memory [ 1756.300009] CPU0: Thermal monitoring enabled (TM2) [ 1756.300009] Extended CMOS year: 2000 [ 1756.300009] Enabling non-boot CPUs ... [ 1756.300009] SMP alternatives: switching to SMP code [ 1756.303611] Booting processor 1 APIC 0x1 ip 0x6000 [ 1756.300009] Initializing CPU#1 [ 1756.300009] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1756.300009] CPU: L2 cache: 2048K [ 1756.300009] CPU 1/0x1 -> Node 0 [ 1756.300009] CPU: Physical Processor ID: 0 [ 1756.300009] CPU: Processor Core ID: 1 [ 1756.300009] CPU1: Thermal monitoring enabled (TM2) [ 1756.460047] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 1756.460115] CPU0 attaching NULL sched-domain. [ 1756.530028] CPU0 attaching sched-domain: [ 1756.530031] domain 0: span 0-1 level MC [ 1756.530033] groups: 0 1 [ 1756.530038] CPU1 attaching sched-domain: [ 1756.530039] domain 0: span 0-1 level MC [ 1756.530042] groups: 1 0 [ 1756.530724] CPU1 is up [ 1756.531513] ACPI: Waking up from system sleep state S4 [ 1756.540200] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 1756.540391] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 1756.540897] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005) [ 1756.540939] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007) [ 1756.541386] ricoh-mmc: Resuming. [ 1756.541395] ricoh-mmc: Controller is now disabled. [ 1756.560018] pci 0000:03:01.4: Refused to change power state, currently in D3 [ 1756.560452] PM: early restore of devices complete after 20.417 msecs [ 1756.634078] i915 0000:00:02.0: setting latency timer to 64 [ 1757.542889] PM: restore of drv:i915 dev:0000:00:02.0 complete after 908.815 msecs [ 1757.542902] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1757.542942] usb usb3: root hub lost power or was reset [ 1757.542969] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1757.543008] usb usb4: root hub lost power or was reset [ 1757.543028] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1757.543033] usb usb1: root hub lost power or was reset [ 1757.546915] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1757.546930] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1757.546937] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1757.546973] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1757.547012] usb usb5: root hub lost power or was reset [ 1757.547032] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1757.547071] usb usb6: root hub lost power or was reset [ 1757.547091] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1757.547130] usb usb7: root hub lost power or was reset [ 1757.547150] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1757.547155] usb usb2: root hub lost power or was reset [ 1757.551033] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1757.551046] pci 0000:00:1e.0: setting latency timer to 64 [ 1757.551060] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1757.551065] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1757.551092] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1757.551097] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1757.551113] ata1.00: _GTF evaluation failed (AE 0x1001) [ 1757.551123] ata3.00: _GTF evaluation failed (AE 0x1001) [ 1757.551236] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1757.551251] wl 0000:0c:00.0: setting latency timer to 64 [ 1757.551416] ata2: port disabled. ignoring. [ 1757.571634] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1757.674768] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fe5fd800-fe5fdfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1757.680796] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1757.770529] ata1.00: configured for UDMA/33 [ 1757.832758] PM: restore of drv:usb dev:usb1 complete after 150.414 msecs [ 1757.982763] PM: restore of drv:usb dev:usb2 complete after 149.985 msecs [ 1757.983559] sd 2:0:0:0: [sda] Starting disk [ 1758.410311] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1758.410333] ata3.01: SATA link down (SStatus 0 SControl 300) [ 1758.470585] ata3.00: configured for UDMA/100 [ 1758.810167] PM: restore of drv:sd dev:2:0:0:0 complete after 826.601 msecs [ 1758.850172] PM: restore of devices complete after 2256.346 msecs [ 1758.850442] PM: Image restored successfully. [ 1758.850444] Restarting tasks ... done. [ 1758.853711] PM: Basic memory bitmaps freed [ 1758.970041] ata4.01: failed to resume link (SControl 0) [ 1758.970104] ata4.00: SATA link down (SStatus 0 SControl 300) [ 1758.970129] ata4.01: SATA link down (SStatus 0 SControl 0) [ 1777.035452] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1787.522543] eth2: no IPv6 routers present