[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-11-generic (buildd@zirconium) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 (Ubuntu 2.6.38-11.50-generic 2.6.38.8) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.2 present. [ 0.000000] DMI: /NF-CK804, BIOS 6.00 PG 06/15/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f3ba0] f3ba0 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 36768000 - 373ac000 [ 0.000000] ACPI: RSDP 000f81c0 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 3fff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fff3180 0623B (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] ACPI: SRAT 3fff94c0 00090 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: MCFG 3fff95c0 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 3fff9400 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262013 [ 0.000000] free_area_init_node: node 0, pgdat c1784180, node_mem_map f5f68200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s28800 r0 d24448 u2097152 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259965 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=599c31b9-5b0c-4889-b6ed-d5fec9889450 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1011884k/1048512k available (5191k kernel code, 36168k reserved, 2537k data, 700k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc1511e91 - 0xc178c500 (2537 kB) [ 0.000000] .text : 0xc1000000 - 0xc1511e91 (5191 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2210.248 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.49 BogoMIPS (lpj=8840992) [ 0.008013] pid_max: default: 32768 minimum: 301 [ 0.008043] Security Framework initialized [ 0.008072] AppArmor: AppArmor initialized [ 0.008074] Yama: becoming mindful. [ 0.008147] Mount-cache hash table entries: 512 [ 0.008310] Initializing cgroup subsys ns [ 0.008314] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.008318] Initializing cgroup subsys cpuacct [ 0.008324] Initializing cgroup subsys memory [ 0.008334] Initializing cgroup subsys devices [ 0.008338] Initializing cgroup subsys freezer [ 0.008341] Initializing cgroup subsys net_cls [ 0.008344] Initializing cgroup subsys blkio [ 0.008383] mce: CPU supports 5 MCE banks [ 0.008988] SMP alternatives: switching to UP code [ 0.017445] ACPI: Core revision 20110112 [ 0.023368] ftrace: allocating 23652 entries in 47 pages [ 0.024088] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024400] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.065393] CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01 [ 0.068003] Performance Events: AMD PMU driver. [ 0.068003] ... version: 0 [ 0.068003] ... bit width: 48 [ 0.068003] ... generic registers: 4 [ 0.068003] ... value mask: 0000ffffffffffff [ 0.068003] ... max period: 00007fffffffffff [ 0.068003] ... fixed-purpose events: 0 [ 0.068003] ... event mask: 000000000000000f [ 0.068003] Brought up 1 CPUs [ 0.068003] Total of 1 processors activated (4420.49 BogoMIPS). [ 0.068003] devtmpfs: initialized [ 0.068003] print_constraints: dummy: [ 0.068003] Time: 17:08:42 Date: 10/04/11 [ 0.068003] NET: Registered protocol family 16 [ 0.068003] EISA bus registered [ 0.068003] node 0 link 0: io port [6000, ffff] [ 0.068003] TOM: 0000000040000000 aka 1024M [ 0.068003] node 0 link 0: mmio [a0000, bffff] [ 0.068003] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.068003] node 0 link 0: mmio [40000000, febfffff] [ 0.068003] node 0 link 0: mmio [e0000000, e05fffff] [ 0.068003] bus: [00, 05] on node 0 link 0 [ 0.068003] bus: 00 index 0 [io 0x0000-0xffff] [ 0.068003] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.068003] bus: 00 index 2 [mem 0x40000000-0xffffffff] [ 0.068003] ACPI: bus type pci registered [ 0.068003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.068003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.068003] PCI: Using MMCONFIG for extended config space [ 0.068003] PCI: Using configuration type 1 for base access [ 0.068003] bio: create slab at 0 [ 0.068970] ACPI: EC: Look up EC in DSDT [ 0.072864] ACPI: Interpreter enabled [ 0.072867] ACPI: (supports S0 S3 S4 S5) [ 0.072884] ACPI: Using IOAPIC for interrupt routing [ 0.078462] ACPI: No dock devices found. [ 0.078464] HEST: Table not found. [ 0.078467] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.078951] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) [ 0.079906] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored) [ 0.079909] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored) [ 0.079912] pci_root PNP0A08:00: host bridge window [io 0x6000-0xffff] (ignored) [ 0.079915] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored) [ 0.079918] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.079921] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) [ 0.079924] pci_root PNP0A08:00: host bridge window [mem 0xfeb00000-0xfebfffff] (ignored) [ 0.079938] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580 [ 0.079999] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601 [ 0.080026] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.080037] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05 [ 0.080045] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc1f] [ 0.080058] pci 0000:00:01.1: reg 20: [io 0xf800-0xf83f] [ 0.080063] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f] [ 0.080074] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.080077] pci 0000:00:01.1: PME# disabled [ 0.080091] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03 [ 0.080099] pci 0000:00:02.0: reg 10: [mem 0xfebff000-0xfebfffff] [ 0.080123] pci 0000:00:02.0: supports D1 D2 [ 0.080125] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080128] pci 0000:00:02.0: PME# disabled [ 0.080139] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03 [ 0.080148] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff] [ 0.080176] pci 0000:00:02.1: supports D1 D2 [ 0.080178] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080181] pci 0000:00:02.1: PME# disabled [ 0.080197] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401 [ 0.080205] pci 0000:00:04.0: reg 10: [io 0xf000-0xf0ff] [ 0.080210] pci 0000:00:04.0: reg 14: [io 0xec00-0xecff] [ 0.080215] pci 0000:00:04.0: reg 18: [mem 0xfebfd000-0xfebfdfff] [ 0.080234] pci 0000:00:04.0: supports D1 D2 [ 0.080244] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101 [ 0.080262] pci 0000:00:06.0: reg 20: [io 0xe000-0xe00f] [ 0.080282] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101 [ 0.080290] pci 0000:00:07.0: reg 10: [io 0x09f0-0x09f7] [ 0.080295] pci 0000:00:07.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.080300] pci 0000:00:07.0: reg 18: [io 0x0970-0x0977] [ 0.080305] pci 0000:00:07.0: reg 1c: [io 0x0b70-0x0b73] [ 0.080310] pci 0000:00:07.0: reg 20: [io 0xcc00-0xcc0f] [ 0.080315] pci 0000:00:07.0: reg 24: [mem 0xfebfb000-0xfebfbfff] [ 0.080333] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101 [ 0.080340] pci 0000:00:08.0: reg 10: [io 0x09e0-0x09e7] [ 0.080345] pci 0000:00:08.0: reg 14: [io 0x0be0-0x0be3] [ 0.080350] pci 0000:00:08.0: reg 18: [io 0x0960-0x0967] [ 0.080355] pci 0000:00:08.0: reg 1c: [io 0x0b60-0x0b63] [ 0.080360] pci 0000:00:08.0: reg 20: [io 0xb800-0xb80f] [ 0.080365] pci 0000:00:08.0: reg 24: [mem 0xfebfa000-0xfebfafff] [ 0.080382] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604 [ 0.080400] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680 [ 0.080408] pci 0000:00:0a.0: reg 10: [mem 0xfebf9000-0xfebf9fff] [ 0.080413] pci 0000:00:0a.0: reg 14: [io 0xb400-0xb407] [ 0.080434] pci 0000:00:0a.0: supports D1 D2 [ 0.080436] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080440] pci 0000:00:0a.0: PME# disabled [ 0.080450] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604 [ 0.080474] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080477] pci 0000:00:0b.0: PME# disabled [ 0.080492] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604 [ 0.080514] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080517] pci 0000:00:0c.0: PME# disabled [ 0.080533] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604 [ 0.080555] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080558] pci 0000:00:0d.0: PME# disabled [ 0.080571] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604 [ 0.080592] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080595] pci 0000:00:0e.0: PME# disabled [ 0.080612] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.080630] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.080646] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.080661] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.080679] PCI: peer root bus 00 res updated from pci conf [ 0.080701] pci 0000:01:08.0: [109e:036e] type 0 class 0x000400 [ 0.080714] pci 0000:01:08.0: reg 10: [mem 0xfeaff000-0xfeafffff pref] [ 0.080767] pci 0000:01:08.1: [109e:0878] type 0 class 0x000480 [ 0.080779] pci 0000:01:08.1: reg 10: [mem 0xfeafe000-0xfeafefff pref] [ 0.080836] pci 0000:01:0a.0: [14f1:2f00] type 0 class 0x000780 [ 0.080847] pci 0000:01:0a.0: reg 10: [mem 0xfe9f0000-0xfe9fffff] [ 0.080854] pci 0000:01:0a.0: reg 14: [io 0xac00-0xac07] [ 0.080886] pci 0000:01:0a.0: PME# supported from D3hot D3cold [ 0.080890] pci 0000:01:0a.0: PME# disabled [ 0.080911] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.080914] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] [ 0.080917] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.080921] pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff pref] [ 0.080924] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.080927] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.080930] pci 0000:00:09.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode) [ 0.080950] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.080954] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff] [ 0.080957] pci 0000:00:0b.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.080962] pci 0000:00:0b.0: bridge window [mem 0xfe700000-0xfe7fffff 64bit pref] [ 0.080981] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.080985] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff] [ 0.080988] pci 0000:00:0c.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.080992] pci 0000:00:0c.0: bridge window [mem 0xfe500000-0xfe5fffff 64bit pref] [ 0.081012] pci 0000:00:0d.0: PCI bridge to [bus 04-04] [ 0.081016] pci 0000:00:0d.0: bridge window [io 0x7000-0x7fff] [ 0.081019] pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.081023] pci 0000:00:0d.0: bridge window [mem 0xfe300000-0xfe3fffff 64bit pref] [ 0.081051] pci 0000:05:00.0: [10de:0391] type 0 class 0x000300 [ 0.081059] pci 0000:05:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.081068] pci 0000:05:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.081077] pci 0000:05:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit] [ 0.081084] pci 0000:05:00.0: reg 24: [io 0x6c00-0x6c7f] [ 0.081090] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.081112] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.081119] pci 0000:00:0e.0: PCI bridge to [bus 05-05] [ 0.081123] pci 0000:00:0e.0: bridge window [io 0x6000-0x6fff] [ 0.081126] pci 0000:00:0e.0: bridge window [mem 0xfb000000-0xfdffffff] [ 0.081130] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.081140] pci_bus 0000:00: on NUMA node 0 [ 0.081143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.081269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.081442] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.109499] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.109541] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.109583] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.109623] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.109663] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.109705] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.109745] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.109787] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.109828] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.109868] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.109910] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.109956] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.110000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.110047] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.110096] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.110144] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.110201] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.110252] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.110304] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.110356] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.110383] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.110440] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.110498] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.110556] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.110613] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.110670] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.110728] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.110786] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.110843] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.110906] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.110968] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.111031] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.111129] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.111132] vgaarb: loaded [ 0.111347] SCSI subsystem initialized [ 0.111394] libata version 3.00 loaded. [ 0.111446] usbcore: registered new interface driver usbfs [ 0.111461] usbcore: registered new interface driver hub [ 0.111485] usbcore: registered new device driver usb [ 0.111597] wmi: Mapper loaded [ 0.111599] PCI: Using ACPI for IRQ routing [ 0.111603] PCI: pci_cache_line_size set to 64 bytes [ 0.111652] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.111655] reserve RAM buffer: 000000003fff0000 - 000000003fffffff [ 0.111758] NetLabel: Initializing [ 0.111760] NetLabel: domain hash size = 128 [ 0.111762] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.111773] NetLabel: unlabeled traffic allowed by default [ 0.119257] AppArmor: AppArmor Filesystem Enabled [ 0.119292] pnp: PnP ACPI init [ 0.119311] ACPI: bus type pnp registered [ 0.119341] pnp 00:00: [io 0x1000-0x107f] [ 0.119344] pnp 00:00: [io 0x1080-0x10ff] [ 0.119346] pnp 00:00: [io 0x1400-0x147f] [ 0.119348] pnp 00:00: [io 0x1480-0x14ff] [ 0.119350] pnp 00:00: [io 0x1800-0x187f] [ 0.119353] pnp 00:00: [io 0x1880-0x18ff] [ 0.119422] system 00:00: [io 0x1000-0x107f] has been reserved [ 0.119425] system 00:00: [io 0x1080-0x10ff] has been reserved [ 0.119428] system 00:00: [io 0x1400-0x147f] has been reserved [ 0.119431] system 00:00: [io 0x1480-0x14ff] has been reserved [ 0.119434] system 00:00: [io 0x1800-0x187f] has been reserved [ 0.119437] system 00:00: [io 0x1880-0x18ff] has been reserved [ 0.119441] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.119952] pnp 00:01: [bus 00-05] [ 0.119955] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.119957] pnp 00:01: [io 0x0000-0x03af window] [ 0.119960] pnp 00:01: [io 0x03e0-0x0cf7 window] [ 0.119962] pnp 00:01: [io 0x6000-0xffff window] [ 0.119964] pnp 00:01: [io 0x03b0-0x03df window] [ 0.119967] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.119970] pnp 00:01: [mem 0x40000000-0xfebfffff window] [ 0.119972] pnp 00:01: [mem 0x00000000 window] [ 0.119975] pnp 00:01: [mem 0xfeb00000-0xfebfffff window] [ 0.120049] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.120500] pnp 00:02: [io 0x0010-0x001f] [ 0.120502] pnp 00:02: [io 0x0022-0x003f] [ 0.120504] pnp 00:02: [io 0x0044-0x005f] [ 0.120506] pnp 00:02: [io 0x0062-0x0063] [ 0.120508] pnp 00:02: [io 0x0065-0x006f] [ 0.120511] pnp 00:02: [io 0x0074-0x007f] [ 0.120513] pnp 00:02: [io 0x0091-0x0093] [ 0.120515] pnp 00:02: [io 0x00a2-0x00bf] [ 0.120517] pnp 00:02: [io 0x00e0-0x00ef] [ 0.120519] pnp 00:02: [io 0x04d0-0x04d1] [ 0.120521] pnp 00:02: [io 0x0800-0x0807] [ 0.120523] pnp 00:02: [io 0x0290-0x030f] [ 0.120526] pnp 00:02: [io 0x0290-0x0297] [ 0.120592] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.120595] system 00:02: [io 0x0800-0x0807] has been reserved [ 0.120597] system 00:02: [io 0x0290-0x030f] has been reserved [ 0.120600] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.120604] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.120615] pnp 00:03: [dma 4] [ 0.120617] pnp 00:03: [io 0x0000-0x000f] [ 0.120619] pnp 00:03: [io 0x0080-0x0090] [ 0.120621] pnp 00:03: [io 0x0094-0x009f] [ 0.120624] pnp 00:03: [io 0x00c0-0x00df] [ 0.120668] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.120678] pnp 00:04: [io 0x0070-0x0073] [ 0.120690] pnp 00:04: [irq 8] [ 0.120728] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.120736] pnp 00:05: [io 0x0061] [ 0.120773] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.120781] pnp 00:06: [io 0x00f0-0x00ff] [ 0.120787] pnp 00:06: [irq 13] [ 0.120825] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.120962] pnp 00:07: [io 0x03f0-0x03f5] [ 0.120964] pnp 00:07: [io 0x03f7] [ 0.120970] pnp 00:07: [irq 6] [ 0.120972] pnp 00:07: [dma 2] [ 0.121025] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.121201] pnp 00:08: [io 0x03f8-0x03ff] [ 0.121207] pnp 00:08: [irq 4] [ 0.121268] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.121457] pnp 00:09: [io 0x02f8-0x02ff] [ 0.121463] pnp 00:09: [irq 3] [ 0.121523] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.121782] pnp 00:0a: [io 0x0378-0x037f] [ 0.121788] pnp 00:0a: [irq 7] [ 0.121844] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.121945] pnp 00:0b: [irq 12] [ 0.121984] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.122004] pnp 00:0c: [io 0x0060] [ 0.122006] pnp 00:0c: [io 0x0064] [ 0.122012] pnp 00:0c: [irq 1] [ 0.122052] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.122079] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 0.122134] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.122138] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.122241] pnp 00:0e: [mem 0x000d1800-0x000d3fff] [ 0.122244] pnp 00:0e: [mem 0x000f0000-0x000f7fff] [ 0.122246] pnp 00:0e: [mem 0x000f8000-0x000fbfff] [ 0.122248] pnp 00:0e: [mem 0x000fc000-0x000fffff] [ 0.122251] pnp 00:0e: [mem 0x3fff0000-0x3fffffff] [ 0.122253] pnp 00:0e: [mem 0xffff0000-0xffffffff] [ 0.122256] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.122258] pnp 00:0e: [mem 0x00100000-0x3ffeffff] [ 0.122260] pnp 00:0e: [mem 0xfec00000-0xfec00fff] [ 0.122263] pnp 00:0e: [mem 0xfee00000-0xfeefffff] [ 0.122265] pnp 00:0e: [mem 0xfefff000-0xfeffffff] [ 0.122268] pnp 00:0e: [mem 0xfff80000-0xfff80fff] [ 0.122270] pnp 00:0e: [mem 0xfff90000-0xfffbffff] [ 0.122272] pnp 00:0e: [mem 0xfffed000-0xfffeffff] [ 0.122342] system 00:0e: [mem 0x000d1800-0x000d3fff] has been reserved [ 0.122345] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.122349] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.122352] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.122355] system 00:0e: [mem 0x3fff0000-0x3fffffff] could not be reserved [ 0.122358] system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved [ 0.122361] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.122365] system 00:0e: [mem 0x00100000-0x3ffeffff] could not be reserved [ 0.122368] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.122371] system 00:0e: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.122374] system 00:0e: [mem 0xfefff000-0xfeffffff] has been reserved [ 0.122377] system 00:0e: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.122381] system 00:0e: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.122384] system 00:0e: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.122387] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.122396] pnp: PnP ACPI: found 15 devices [ 0.122398] ACPI: ACPI bus type pnp unregistered [ 0.122401] PnPBIOS: Disabled by ACPI PNP [ 0.158807] Switching to clocksource acpi_pm [ 0.158845] pci 0000:00:09.0: PCI bridge to [bus 01-01] [ 0.158849] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] [ 0.158852] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.158856] pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff pref] [ 0.158860] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.158863] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff] [ 0.158866] pci 0000:00:0b.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.158870] pci 0000:00:0b.0: bridge window [mem 0xfe700000-0xfe7fffff 64bit pref] [ 0.158874] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.158876] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff] [ 0.158880] pci 0000:00:0c.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.158884] pci 0000:00:0c.0: bridge window [mem 0xfe500000-0xfe5fffff 64bit pref] [ 0.158888] pci 0000:00:0d.0: PCI bridge to [bus 04-04] [ 0.158890] pci 0000:00:0d.0: bridge window [io 0x7000-0x7fff] [ 0.158894] pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.158897] pci 0000:00:0d.0: bridge window [mem 0xfe300000-0xfe3fffff 64bit pref] [ 0.158905] pci 0000:05:00.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref] [ 0.158909] pci 0000:00:0e.0: PCI bridge to [bus 05-05] [ 0.158911] pci 0000:00:0e.0: bridge window [io 0x6000-0x6fff] [ 0.158915] pci 0000:00:0e.0: bridge window [mem 0xfb000000-0xfdffffff] [ 0.158918] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.158927] pci 0000:00:09.0: setting latency timer to 64 [ 0.158931] pci 0000:00:0b.0: setting latency timer to 64 [ 0.158936] pci 0000:00:0c.0: setting latency timer to 64 [ 0.158940] pci 0000:00:0d.0: setting latency timer to 64 [ 0.158945] pci 0000:00:0e.0: setting latency timer to 64 [ 0.158948] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.158952] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.158955] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff] [ 0.158958] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.158961] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.158964] pci_bus 0000:01: resource 2 [mem 0xfea00000-0xfeafffff pref] [ 0.158966] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.158969] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff] [ 0.158972] pci_bus 0000:01: resource 6 [mem 0x40000000-0xffffffff] [ 0.158975] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.158978] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.158980] pci_bus 0000:02: resource 2 [mem 0xfe700000-0xfe7fffff 64bit pref] [ 0.158983] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 0.158986] pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.158989] pci_bus 0000:03: resource 2 [mem 0xfe500000-0xfe5fffff 64bit pref] [ 0.158992] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff] [ 0.158995] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.158998] pci_bus 0000:04: resource 2 [mem 0xfe300000-0xfe3fffff 64bit pref] [ 0.159000] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] [ 0.159003] pci_bus 0000:05: resource 1 [mem 0xfb000000-0xfdffffff] [ 0.159006] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.159043] NET: Registered protocol family 2 [ 0.159106] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.159392] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.159392] Switched to NOHz mode on CPU #0 [ 0.159392] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.159392] TCP: Hash tables configured (established 131072 bind 65536) [ 0.159392] TCP reno registered [ 0.159392] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.159392] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.159392] NET: Registered protocol family 1 [ 0.176086] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.176092] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 0.176099] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.176104] pci 0000:00:0b.0: Linking AER extended capability [ 0.176141] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.176146] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 0.176154] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.176156] pci 0000:00:0c.0: Linking AER extended capability [ 0.176197] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.176202] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.176210] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.176213] pci 0000:00:0d.0: Linking AER extended capability [ 0.176257] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.176262] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.176269] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.176272] pci 0000:00:0e.0: Linking AER extended capability [ 0.176292] pci 0000:05:00.0: Boot video device [ 0.176295] PCI: CLS 32 bytes, default 64 [ 0.176524] cpufreq-nforce2: No nForce2 chipset. [ 0.176670] audit: initializing netlink socket (disabled) [ 0.176679] type=2000 audit(1317748122.172:1): initialized [ 0.186844] Trying to unpack rootfs image as initramfs... [ 0.204309] highmem bounce pool size: 64 pages [ 0.204316] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.212113] VFS: Disk quotas dquot_6.5.2 [ 0.212194] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.212885] fuse init (API version 7.16) [ 0.212982] msgmni has been set to 1704 [ 0.220186] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.220215] io scheduler noop registered [ 0.220217] io scheduler deadline registered [ 0.220234] io scheduler cfq registered (default) [ 0.220355] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.220385] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X [ 0.220431] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.220448] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X [ 0.220486] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.220503] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X [ 0.220544] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.220561] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X [ 0.220631] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.220658] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.220751] efifb: probing for efifb [ 0.220754] efifb: cannot reserve video memory at 0xa6d60 [ 0.220758] efifb: framebuffer at 0xa6d60, mapped to 0xc00a6d60, using 56k, total 64k [ 0.220761] efifb: mode is 640x350x1, linelength=80, pages=1 [ 0.220763] efifb: scrolling: redraw [ 0.220766] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.220879] Console: switching to colour frame buffer device 80x43 [ 0.220898] fb0: EFI VGA frame buffer device [ 0.220997] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.221003] ACPI: Power Button [PWRB] [ 0.221063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.221066] ACPI: Power Button [PWRF] [ 0.221125] ACPI: Fan [FAN] (on) [ 0.221369] ACPI: acpi_idle registered with cpuidle [ 0.223463] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.223465] ACPI: Thermal Zone [THRM] (40 C) [ 0.223529] ERST: Table is not found! [ 0.223591] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.243897] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.243938] isapnp: Scanning for PnP cards... [ 0.332361] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.373627] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.460700] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.480461] Linux agpgart interface v0.103 [ 0.481935] brd: module loaded [ 0.482558] loop: module loaded [ 0.482657] i2c-core: driver [adp5520] using legacy suspend method [ 0.482659] i2c-core: driver [adp5520] using legacy resume method [ 0.482833] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.483046] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.483061] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.483076] pata_acpi 0000:00:07.0: setting latency timer to 64 [ 0.483083] pata_acpi 0000:00:07.0: PCI INT A disabled [ 0.483242] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.483250] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.483265] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.483271] pata_acpi 0000:00:08.0: PCI INT A disabled [ 0.483653] Fixed MDIO Bus: probed [ 0.483697] PPP generic driver version 2.4.2 [ 0.483738] tun: Universal TUN/TAP device driver, 1.6 [ 0.483740] tun: (C) 1999-2004 Max Krasnyansky [ 0.483821] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.483943] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.483952] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 0.483966] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.483969] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.488213] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.488244] ehci_hcd 0000:00:02.1: debug port 1 [ 0.488250] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported [ 0.488269] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 [ 0.535540] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.535688] hub 1-0:1.0: USB hub found [ 0.535693] hub 1-0:1.0: 10 ports detected [ 0.535783] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.535964] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 0.535982] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 0.536013] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.536016] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.616427] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.616465] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfebff000 [ 0.684393] hub 2-0:1.0: USB hub found [ 0.684400] hub 2-0:1.0: 10 ports detected [ 0.684494] uhci_hcd: USB Universal Host Controller Interface driver [ 0.684602] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.687836] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.687842] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.687975] mousedev: PS/2 mouse device common for all mice [ 0.688135] rtc_cmos 00:04: RTC can wake from S4 [ 0.688182] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.688205] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.688286] device-mapper: uevent: version 1.0.3 [ 0.688367] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.692203] device-mapper: multipath: version 1.2.0 loaded [ 0.692206] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.692298] EISA: Probing bus 0 at eisa.0 [ 0.692301] EISA: Cannot allocate resource for mainboard [ 0.692304] Cannot allocate resource for EISA slot 1 [ 0.692306] Cannot allocate resource for EISA slot 2 [ 0.692309] Cannot allocate resource for EISA slot 3 [ 0.692311] Cannot allocate resource for EISA slot 4 [ 0.692313] Cannot allocate resource for EISA slot 5 [ 0.692316] Cannot allocate resource for EISA slot 6 [ 0.692318] Cannot allocate resource for EISA slot 7 [ 0.692320] Cannot allocate resource for EISA slot 8 [ 0.692322] EISA: Detected 0 cards. [ 0.694395] cpuidle: using governor ladder [ 0.694397] cpuidle: using governor menu [ 0.694653] TCP cubic registered [ 0.694790] NET: Registered protocol family 10 [ 0.695309] NET: Registered protocol family 17 [ 0.695331] Registering the dns_resolver key type [ 0.695355] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) [ 0.699709] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects [ 0.699711] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup [ 0.699735] Using IPI No-Shortcut mode [ 0.699858] PM: Hibernation image not present or could not be loaded. [ 0.699870] registered taskstats version 1 [ 0.700104] Magic number: 15:192:137 [ 0.700121] block ram2: hash matches [ 0.700217] rtc_cmos 00:04: setting system clock to 2011-10-04 17:08:43 UTC (1317748123) [ 0.700220] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.700222] EDD information not available. [ 0.720538] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.943871] isapnp: No Plug & Play device found [ 0.955543] Freeing initrd memory: 12560k freed [ 0.963242] Freeing unused kernel memory: 700k freed [ 0.963771] Write protecting the kernel text: 5192k [ 0.963805] Write protecting the kernel read-only data: 2148k [ 0.983164] <30>udev[60]: starting version 167 [ 1.075810] pata_amd 0000:00:06.0: version 0.4.1 [ 1.075857] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.166658] scsi0 : pata_amd [ 1.169205] Floppy drive(s): fd0 is 1.44M [ 1.170144] scsi1 : pata_amd [ 1.170642] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 [ 1.170645] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15 [ 1.175957] sata_nv 0000:00:07.0: version 3.5 [ 1.175973] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.176051] sata_nv 0000:00:07.0: setting latency timer to 64 [ 1.179555] scsi2 : sata_nv [ 1.181840] scsi3 : sata_nv [ 1.181968] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 23 [ 1.181972] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 23 [ 1.182012] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.182153] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 1.182159] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 1.182164] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.192144] FDC 0 is a post-1991 82077 [ 1.332311] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22LP20, 1.02, max UDMA/66 [ 1.332321] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc500c600) ACPI=0x1f01f (30:600:0x13) [ 1.348239] ata1.00: configured for UDMA/66 [ 1.350214] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22LP20 1.02 PQ: 0 ANSI: 5 [ 1.352145] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.352148] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.352257] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.352329] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.496020] ata3: SATA link down (SStatus 0 SControl 300) [ 1.572412] ata2.00: ATA-6: ST3120022A, 8.54, max UDMA/100 [ 1.572415] ata2.00: 234441648 sectors, multi 16: LBA48 [ 1.572421] ata2: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc500c600) ACPI=0x3f01f (20:600:0x13) [ 1.588341] ata2.00: configured for UDMA/100 [ 1.588408] scsi 1:0:0:0: Direct-Access ATA ST3120022A 8.54 PQ: 0 ANSI: 5 [ 1.588551] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.588629] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.588675] sd 1:0:0:0: [sda] Write Protect is off [ 1.588678] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.588699] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.628620] sda: sda1 sda2 < sda5 > [ 1.628869] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.704651] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:01:6c:cf:29:07 [ 1.704655] forcedeth 0000:00:0a.0: highdma csum lnktim desc-v3 [ 1.704703] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1.704747] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.706110] scsi4 : sata_nv [ 1.706470] scsi5 : sata_nv [ 1.706597] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 22 [ 1.706601] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 22 [ 1.900020] ata4: SATA link down (SStatus 0 SControl 300) [ 2.016019] ata5: SATA link down (SStatus 0 SControl 300) [ 2.328018] ata6: SATA link down (SStatus 0 SControl 300) [ 2.716461] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.986354] <30>udev[316]: starting version 167 [ 17.018632] lp: driver loaded but no devices found [ 17.033170] Adding 1046524k swap on /dev/sda5. Priority:-1 extents:1 across:1046524k [ 17.211291] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 17.373629] type=1400 audit(1317748140.167:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=537 comm="apparmor_parser" [ 17.374013] type=1400 audit(1317748140.167:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=537 comm="apparmor_parser" [ 17.374256] type=1400 audit(1317748140.167:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=537 comm="apparmor_parser" [ 17.599089] i2c i2c-0: nForce2 SMBus adapter at 0xf800 [ 17.599167] i2c i2c-1: nForce2 SMBus adapter at 0xf400 [ 17.643078] parport_pc 00:0a: reported by Plug and Play ACPI [ 17.643118] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 17.956476] type=1400 audit(1317748140.751:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=737 comm="apparmor_parser" [ 17.956875] type=1400 audit(1317748140.751:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=737 comm="apparmor_parser" [ 17.957127] type=1400 audit(1317748140.751:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=737 comm="apparmor_parser" [ 18.072821] [drm] Initialized drm 1.1.0 20060810 [ 18.076847] lp0: using parport0 (interrupt-driven). [ 18.097298] type=1400 audit(1317748140.891:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=738 comm="apparmor_parser" [ 18.116971] type=1400 audit(1317748140.911:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=738 comm="apparmor_parser" [ 18.133790] type=1400 audit(1317748140.927:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=738 comm="apparmor_parser" [ 18.200148] IR NEC protocol handler initialized [ 18.211787] type=1400 audit(1317748141.003:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=768 comm="apparmor_parser" [ 18.226076] IR RC5(x) protocol handler initialized [ 18.241327] psmouse serio1: ID: 10 00 64 [ 18.243130] IR RC6 protocol handler initialized [ 18.265993] IR JVC protocol handler initialized [ 18.282384] IR Sony protocol handler initialized [ 18.308281] lirc_dev: IR Remote Control driver registered, major 251 [ 18.310133] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 18.310149] nouveau 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 18.310155] nouveau 0000:05:00.0: setting latency timer to 64 [ 18.313286] IR LIRC bridge handler initialized [ 18.316426] [drm] nouveau 0000:05:00.0: Detected an NV40 generation card (0x04b100b1) [ 18.316432] checking generic (a6d60 e000) vs hw (d0000000 10000000) [ 18.316435] checking generic (a6d60 e000) vs hw (fc000000 1000000) [ 18.320337] [drm] nouveau 0000:05:00.0: Attempting to load BIOS image from PRAMIN [ 18.363926] [drm] nouveau 0000:05:00.0: ... appears to be valid [ 18.363931] [drm] nouveau 0000:05:00.0: BIT BIOS found [ 18.363935] [drm] nouveau 0000:05:00.0: Bios version 05.73.22.25 [ 18.363938] [drm] nouveau 0000:05:00.0: TMDS table version 1.1 [ 18.363941] [drm] nouveau 0000:05:00.0: TMDS table script pointers not stubbed [ 18.363943] [drm] nouveau 0000:05:00.0: BIT table 'd' not found [ 18.363946] [drm] nouveau 0000:05:00.0: Found Display Configuration Block version 3.0 [ 18.363949] [drm] nouveau 0000:05:00.0: Raw DCB entry 0: 01001300 00000028 [ 18.363953] [drm] nouveau 0000:05:00.0: Raw DCB entry 1: 03010312 00000000 [ 18.363955] [drm] nouveau 0000:05:00.0: Raw DCB entry 2: 04010310 00000028 [ 18.363958] [drm] nouveau 0000:05:00.0: Raw DCB entry 3: 020223f1 00c0c083 [ 18.363962] [drm] nouveau 0000:05:00.0: DCB connector table: VHER 0x30 5 10 2 [ 18.363965] [drm] nouveau 0000:05:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 18.363968] [drm] nouveau 0000:05:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [ 18.363971] [drm] nouveau 0000:05:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 18.363974] [drm] nouveau 0000:05:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 18.363977] [drm] nouveau 0000:05:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 18.363984] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xDCAC [ 18.364099] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xE338 [ 18.382832] ppdev: user-space parallel port driver [ 18.404771] Linux video capture interface: v2.00 [ 18.415290] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xEA22 [ 18.415311] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xEB9D [ 18.436063] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xED8B [ 18.555336] [drm] nouveau 0000:05:00.0: 1 available performance level(s) [ 18.555343] [drm] nouveau 0000:05:00.0: 0: memory 400MHz core 560MHz voltage 1100mV fanspeed 100% [ 18.555353] [drm] nouveau 0000:05:00.0: c: memory 405MHz core 558MHz [ 18.569820] [TTM] Zone kernel: Available graphics memory: 442968 kiB. [ 18.569824] [TTM] Zone highmem: Available graphics memory: 512572 kiB. [ 18.569827] [TTM] Initializing pool allocator. [ 18.569850] [drm] nouveau 0000:05:00.0: Detected 256MiB VRAM [ 18.575503] [drm] nouveau 0000:05:00.0: 512 MiB GART (aperture) [ 18.581815] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 18.581819] [drm] No driver support for vblank timestamp query. [ 18.585596] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 18.585602] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 18.585605] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 18.585609] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 18.664938] bttv: driver version 0.9.18 loaded [ 18.664942] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 18.668189] bttv: Bt8xx card found (0). [ 18.668312] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 18.668329] bttv 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 18.668339] bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 16, latency: 32, mmio: 0xfeaff000 [ 18.668360] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] [ 18.668398] bttv0: gpio: en=00000000, out=00000000 in=003fffff [init] [ 18.669674] tveeprom 4-0050: Huh, no eeprom present (err=-6)? [ 18.669677] bttv0: tuner type unset [ 18.671439] bttv0: registered device video0 [ 18.673263] bttv0: registered device vbi0 [ 18.784904] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 18.784912] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 18.784940] Intel ICH 0000:00:04.0: setting latency timer to 64 [ 18.960546] [drm] nouveau 0000:05:00.0: allocated 1280x1024 fb: 0x49000, bo f03d2400 [ 18.960552] checking generic (a6d60 e000) vs hw (d0000000 10000000) [ 18.960554] checking generic (a6d60 e000) vs hw (fc000000 1000000) [ 18.960649] fbcon: nouveaufb (fb1) is primary device [ 18.960652] fbcon: Remapping primary device, fb1, to tty 1-63 [ 18.970893] [drm] nouveau 0000:05:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 18.970897] [drm] nouveau 0000:05:00.0: Output VGA-1 is running on CRTC 0 using output A [ 18.971604] fb1: nouveaufb frame buffer device [ 18.971607] drm: registered panic notifier [ 18.971614] [drm] Initialized nouveau 0.0.16 20090420 for 0000:05:00.0 on minor 0 [ 19.116091] intel8x0_measure_ac97_clock: measured 54555 usecs (2680 samples) [ 19.116096] intel8x0: clocking to 46901 [ 19.229217] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3 [ 19.622052] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 19.642096] [drm] nouveau 0000:05:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 19.642101] [drm] nouveau 0000:05:00.0: Output VGA-1 is running on CRTC 0 using output A [ 24.344245] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 28.384019] eth0: no IPv6 routers present