[ 0.000000] microcode: microcode updated early to revision 0x22, date = 2017-01-27 [ 0.000000] Linux version 4.15.4-041504-generic (kernel@kathleen) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #201802162207 SMP Fri Feb 16 22:08:57 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.4-041504-generic root=UUID=c5346370-aade-46cb-80a9-008f99385ed2 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d4b9afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d4b9b000-0x00000000d4ba1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d4ba2000-0x00000000d4fd1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d4fd2000-0x00000000d5455fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d5456000-0x00000000daedafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000daedb000-0x00000000daffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000db75ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db760000-0x00000000db7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000dbfadfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dbfae000-0x00000000dbffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dc000000-0x00000000dd71bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd71c000-0x00000000dd7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dd800000-0x00000000dee0bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dee0c000-0x00000000deffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Precision T1700/073MMW, BIOS A08 04/25/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DBFFF write-protect [ 0.000000] DC000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back [ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back [ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back [ 0.000000] 5 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 8160M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdee0c max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd970-0x000fd97f] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 8b000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x15933a000, 0x15933afff] PGTABLE [ 0.000000] BRK [0x15933b000, 0x15933bfff] PGTABLE [ 0.000000] BRK [0x15933c000, 0x15933cfff] PGTABLE [ 0.000000] BRK [0x15933d000, 0x15933dfff] PGTABLE [ 0.000000] BRK [0x15933e000, 0x15933efff] PGTABLE [ 0.000000] BRK [0x15933f000, 0x15933ffff] PGTABLE [ 0.000000] BRK [0x159340000, 0x159340fff] PGTABLE [ 0.000000] BRK [0x159341000, 0x159341fff] PGTABLE [ 0.000000] BRK [0x159342000, 0x159342fff] PGTABLE [ 0.000000] BRK [0x159343000, 0x159343fff] PGTABLE [ 0.000000] BRK [0x159344000, 0x159344fff] PGTABLE [ 0.000000] BRK [0x159345000, 0x159345fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31c85000-0x34e39fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DBFEE0A0 0000BC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DBFF9520 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DBFEE1E8 00B331 (v02 DELL CBX3 00000014 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000DD7FE080 000040 [ 0.000000] ACPI: APIC 0x00000000DBFF9630 000072 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DBFF96A8 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: SLIC 0x00000000DBFF96F0 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: LPIT 0x00000000DBFF9868 00005C (v01 DELL CBX3 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DBFF98C8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DBFF9E08 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000DBFFA8E0 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711) [ 0.000000] ACPI: HPET 0x00000000DBFFAAA8 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DBFFAAE0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000DBFFAE50 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000DBFFAE90 0034D6 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: ASF! 0x00000000DBFFE368 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: MSDM 0x00000000DBFFE410 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: DMAR 0x00000000DBFFE468 000080 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 0x00000000DBFFE4E8 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.000000] ACPI: ERST 0x00000000DBFFE618 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.000000] ACPI: HEST 0x00000000DBFFE848 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.000000] ACPI: BERT 0x00000000DBFFE8F0 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21dfd3000-0x21dffdfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021dffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d4b9afff] [ 0.000000] node 0: [mem 0x00000000d4ba2000-0x00000000d4fd1fff] [ 0.000000] node 0: [mem 0x00000000d5456000-0x00000000daedafff] [ 0.000000] node 0: [mem 0x00000000db000000-0x00000000db75ffff] [ 0.000000] node 0: [mem 0x00000000db800000-0x00000000dbfadfff] [ 0.000000] node 0: [mem 0x00000000dc000000-0x00000000dd71bfff] [ 0.000000] node 0: [mem 0x00000000dd800000-0x00000000dee0bfff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021dffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021dffffff] [ 0.000000] On node 0 totalpages: 2082326 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3984 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14171 pages used for memmap [ 0.000000] DMA32 zone: 906886 pages, LIFO batch:31 [ 0.000000] Normal zone: 18304 pages used for memmap [ 0.000000] Normal zone: 1171456 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 112 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd4b9b000-0xd4ba1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd4fd2000-0xd5455fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaedb000-0xdaffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb760000-0xdb7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbfae000-0xdbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd71c000-0xdd7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdee0c000-0xdeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2049766 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.4-041504-generic root=UUID=c5346370-aade-46cb-80a9-008f99385ed2 ro quiet splash vt.handoff=7 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8052392K/8329304K available (12300K kernel code, 2469K rwdata, 4196K rodata, 2388K init, 2416K bss, 276912K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39033 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 39 [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.000000] DMAR: RMRR base: 0x000000def7c000 end: 0x000000def89fff [ 0.000000] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0 [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.000000] x2apic enabled [ 0.000000] Switched APIC routing to cluster x2apic. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 3192.910 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.82 BogoMIPS (lpj=12771640) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.024000] CPU: Physical Processor ID: 0 [ 0.024000] CPU: Processor Core ID: 0 [ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.024000] mce: CPU supports 9 MCE banks [ 0.024000] CPU0: Thermal monitoring enabled (TM1) [ 0.024000] process: using mwait in idle threads [ 0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.024000] Spectre V2 : Mitigation: Full generic retpoline [ 0.024000] Freeing SMP alternatives memory: 36K [ 0.028341] TSC deadline timer enabled [ 0.028344] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.028388] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.028417] ... version: 3 [ 0.028417] ... bit width: 48 [ 0.028418] ... generic registers: 8 [ 0.028418] ... value mask: 0000ffffffffffff [ 0.028419] ... max period: 00007fffffffffff [ 0.028419] ... fixed-purpose events: 3 [ 0.028420] ... event mask: 00000007000000ff [ 0.028441] Hierarchical SRCU implementation. [ 0.029112] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.029121] smp: Bringing up secondary CPUs ... [ 0.029167] x86: Booting SMP configuration: [ 0.029167] .... node #0, CPUs: #1 #2 #3 [ 0.032323] smp: Brought up 1 node, 4 CPUs [ 0.032323] smpboot: Max logical packages: 1 [ 0.032323] smpboot: Total of 4 processors activated (25543.28 BogoMIPS) [ 0.034529] devtmpfs: initialized [ 0.034529] x86/mm: Memory block size: 128MB [ 0.034529] evm: security.selinux [ 0.034529] evm: security.SMACK64 [ 0.034529] evm: security.SMACK64EXEC [ 0.034529] evm: security.SMACK64TRANSMUTE [ 0.034529] evm: security.SMACK64MMAP [ 0.034529] evm: security.apparmor [ 0.034529] evm: security.ima [ 0.034529] evm: security.capability [ 0.034529] PM: Registering ACPI NVS region [mem 0xd4b9b000-0xd4ba1fff] (28672 bytes) [ 0.034529] PM: Registering ACPI NVS region [mem 0xdd71c000-0xdd7fffff] (933888 bytes) [ 0.034529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.034529] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.034529] pinctrl core: initialized pinctrl subsystem [ 0.034529] RTC time: 9:14:55, date: 02/19/18 [ 0.034529] NET: Registered protocol family 16 [ 0.034529] audit: initializing netlink subsys (disabled) [ 0.034529] audit: type=2000 audit(1519031695.032:1): state=initialized audit_enabled=0 res=1 [ 0.036051] cpuidle: using governor ladder [ 0.036051] cpuidle: using governor menu [ 0.036051] ACPI: bus type PCI registered [ 0.036051] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.036083] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.036085] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.036091] PCI: Using configuration type 1 for base access [ 0.036118] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.036848] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.036848] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.036849] ACPI: Added _OSI(Module Device) [ 0.036849] ACPI: Added _OSI(Processor Device) [ 0.036849] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.036849] ACPI: Added _OSI(Processor Aggregator Device) [ 0.036849] ACPI: Executed 1 blocks of module-level executable AML code [ 0.041966] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.042554] ACPI: Dynamic OEM Table Load: [ 0.042559] ACPI: SSDT 0xFFFF92CC93EB2000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.042951] ACPI: Dynamic OEM Table Load: [ 0.042955] ACPI: SSDT 0xFFFF92CC93DA3800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.043385] ACPI: Dynamic OEM Table Load: [ 0.043388] ACPI: SSDT 0xFFFF92CC93EAAA00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.044250] ACPI: Interpreter enabled [ 0.044273] ACPI: (supports S0 S3 S4 S5) [ 0.044273] ACPI: Using IOAPIC for interrupt routing [ 0.044311] HEST: Table parsing has been initialized. [ 0.044313] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.044499] ACPI: GPE 0x1E active on init [ 0.044504] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.054754] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.054758] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.055332] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.055761] PCI host bridge to bus 0000:00 [ 0.055763] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.055764] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.055765] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.055766] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.055767] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.055768] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.055769] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] [ 0.055770] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.055776] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.055845] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.055872] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.055991] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.056020] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit] [ 0.056072] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.056130] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.056149] pci 0000:00:16.0: reg 0x10: [mem 0xf713c000-0xf713c00f 64bit] [ 0.056204] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.056263] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.056280] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff] [ 0.056287] pci 0000:00:19.0: reg 0x14: [mem 0xf7139000-0xf7139fff] [ 0.056294] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f] [ 0.056343] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.056400] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.056419] pci 0000:00:1a.0: reg 0x10: [mem 0xf7138000-0xf71383ff] [ 0.056493] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.056552] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.056570] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit] [ 0.056629] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.056688] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.056747] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.056846] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.056906] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.057009] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.057029] pci 0000:00:1d.0: reg 0x10: [mem 0xf7137000-0xf71373ff] [ 0.057103] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.057162] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100 [ 0.057307] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 0.057321] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097] [ 0.057327] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083] [ 0.057333] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077] [ 0.057340] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063] [ 0.057346] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.057353] pci 0000:00:1f.2: reg 0x24: [mem 0xf7136000-0xf71367ff] [ 0.057383] pci 0000:00:1f.2: PME# supported from D3hot [ 0.057435] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.057451] pci 0000:00:1f.3: reg 0x10: [mem 0xf7135000-0xf71350ff 64bit] [ 0.057469] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.057567] pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000 [ 0.057583] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.057593] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.057602] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.057608] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.057614] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.057698] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300 [ 0.057711] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.068026] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.068028] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.068029] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.068032] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.068084] acpiphp: Slot [1] registered [ 0.068089] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.068161] pci 0000:03:00.0: [104c:8240] type 01 class 0x060400 [ 0.068295] pci 0000:03:00.0: supports D1 D2 [ 0.080027] pci 0000:00:1c.1: PCI bridge to [bus 03-04] [ 0.080156] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.080873] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.080926] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.080977] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.081029] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.081081] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.081132] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.081184] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.081237] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.081439] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.081439] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.081439] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.081439] vgaarb: loaded [ 0.081439] SCSI subsystem initialized [ 0.081439] libata version 3.00 loaded. [ 0.081439] ACPI: bus type USB registered [ 0.081439] usbcore: registered new interface driver usbfs [ 0.081439] usbcore: registered new interface driver hub [ 0.081439] usbcore: registered new device driver usb [ 0.081439] EDAC MC: Ver: 3.0.0 [ 0.081439] PCI: Using ACPI for IRQ routing [ 0.081439] PCI: pci_cache_line_size set to 64 bytes [ 0.081439] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff] [ 0.081439] e820: reserve RAM buffer [mem 0xd4b9b000-0xd7ffffff] [ 0.081439] e820: reserve RAM buffer [mem 0xd4fd2000-0xd7ffffff] [ 0.081439] e820: reserve RAM buffer [mem 0xdaedb000-0xdbffffff] [ 0.081439] e820: reserve RAM buffer [mem 0xdb760000-0xdbffffff] [ 0.081439] e820: reserve RAM buffer [mem 0xdbfae000-0xdbffffff] [ 0.081439] e820: reserve RAM buffer [mem 0xdd71c000-0xdfffffff] [ 0.081439] e820: reserve RAM buffer [mem 0xdee0c000-0xdfffffff] [ 0.081439] e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff] [ 0.081439] NetLabel: Initializing [ 0.081439] NetLabel: domain hash size = 128 [ 0.081439] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.081439] NetLabel: unlabeled traffic allowed by default [ 0.081439] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.081439] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.085014] clocksource: Switched to clocksource hpet [ 0.091313] VFS: Disk quotas dquot_6.6.0 [ 0.091323] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.091392] AppArmor: AppArmor Filesystem Enabled [ 0.091410] pnp: PnP ACPI init [ 0.091500] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.091504] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.091672] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.091674] system 00:01: [io 0xffff] has been reserved [ 0.091675] system 00:01: [io 0xffff] has been reserved [ 0.091676] system 00:01: [io 0xffff] has been reserved [ 0.091677] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.091678] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.091679] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.091680] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.091682] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.091683] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.091686] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.091703] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.091741] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.091743] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.091833] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.091835] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.091873] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.091876] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.092406] pnp 00:06: [dma 0 disabled] [ 0.092438] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.092812] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.092814] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.092815] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.092816] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.092817] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.092818] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.092819] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.092820] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.092822] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.092823] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.092824] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.092825] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.092828] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.093034] pnp: PnP ACPI: found 8 devices [ 0.098704] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.098733] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.098735] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.098737] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.098739] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.098742] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.098750] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.098767] pci 0000:00:1c.1: PCI bridge to [bus 03-04] [ 0.098776] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.098777] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.098778] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.098779] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window] [ 0.098780] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff window] [ 0.098781] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff window] [ 0.098782] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfeafffff window] [ 0.098783] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.098784] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.098785] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.098872] NET: Registered protocol family 2 [ 0.098995] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.099069] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.099168] TCP: Hash tables configured (established 65536 bind 65536) [ 0.099186] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.099203] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.099237] NET: Registered protocol family 1 [ 0.148103] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.148114] PCI: CLS 64 bytes, default 64 [ 0.148142] Unpacking initramfs... [ 0.685259] Freeing initrd memory: 50900K [ 0.685307] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.685309] software IO TLB [mem 0xd6edb000-0xdaedb000] (64MB) mapped at [00000000172f72cf-00000000d7f9c1ab] [ 0.685496] Scanning for low memory corruption every 60 seconds [ 0.685926] Initialise system trusted keyrings [ 0.685934] Key type blacklist registered [ 0.685957] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.686669] zbud: loaded [ 0.686986] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.687075] fuse init (API version 7.26) [ 0.688066] Key type asymmetric registered [ 0.688066] Asymmetric key parser 'x509' registered [ 0.688085] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.688107] io scheduler noop registered [ 0.688107] io scheduler deadline registered [ 0.688134] io scheduler cfq registered (default) [ 0.688623] pcieport 0000:00:01.0: Signaling PME with IRQ 25 [ 0.688639] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 [ 0.688652] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 [ 0.688698] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 0.688698] vesafb: scrolling: redraw [ 0.688699] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.688706] vesafb: framebuffer at 0xf1000000, mapped to 0x00000000f18a5dd4, using 5120k, total 5120k [ 0.757333] Console: switching to colour frame buffer device 160x64 [ 0.825894] fb0: VESA VGA frame buffer device [ 0.825903] intel_idle: MWAIT substates: 0x42120 [ 0.825904] intel_idle: v0.4.1 model 0x3C [ 0.826005] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.826079] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.826099] ACPI: Power Button [PWRB] [ 0.826121] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.826135] ACPI: Power Button [PWRF] [ 0.826413] ACPI: Invalid active0 threshold [ 0.826456] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.826486] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.826487] ACPI: Thermal Zone [TZ00] (28 C) [ 0.826689] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.826690] ACPI: Thermal Zone [TZ01] (30 C) [ 0.826739] ERST: Error Record Serialization Table (ERST) support is initialized. [ 0.826740] pstore: using zlib compression [ 0.826741] pstore: Registered erst as persistent store backend [ 0.826829] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 0.826901] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.847607] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.848857] Linux agpgart interface v0.103 [ 0.849826] loop: module loaded [ 0.849985] libphy: Fixed MDIO Bus: probed [ 0.849986] tun: Universal TUN/TAP device driver, 1.6 [ 0.850026] PPP generic driver version 2.4.2 [ 0.850067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.850069] ehci-pci: EHCI PCI platform driver [ 0.850152] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.850156] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.850165] ehci-pci 0000:00:1a.0: debug port 2 [ 0.854056] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.854065] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7138000 [ 0.868078] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.868125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.868126] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.868127] usb usb1: Product: EHCI Host Controller [ 0.868128] usb usb1: Manufacturer: Linux 4.15.4-041504-generic ehci_hcd [ 0.868129] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.868304] hub 1-0:1.0: USB hub found [ 0.868309] hub 1-0:1.0: 2 ports detected [ 0.868532] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.868536] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.868546] ehci-pci 0000:00:1d.0: debug port 2 [ 0.872458] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.872468] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7137000 [ 0.888084] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.888120] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.888121] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.888122] usb usb2: Product: EHCI Host Controller [ 0.888123] usb usb2: Manufacturer: Linux 4.15.4-041504-generic ehci_hcd [ 0.888124] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.888303] hub 2-0:1.0: USB hub found [ 0.888307] hub 2-0:1.0: 2 ports detected [ 0.888431] ehci-platform: EHCI generic platform driver [ 0.888441] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.888443] ohci-pci: OHCI PCI platform driver [ 0.888450] ohci-platform: OHCI generic platform driver [ 0.888454] uhci_hcd: USB Universal Host Controller Interface driver [ 0.888578] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.888582] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.889650] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.889654] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.889752] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.889753] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.889754] usb usb3: Product: xHCI Host Controller [ 0.889755] usb usb3: Manufacturer: Linux 4.15.4-041504-generic xhci-hcd [ 0.889756] usb usb3: SerialNumber: 0000:00:14.0 [ 0.889893] hub 3-0:1.0: USB hub found [ 0.889908] hub 3-0:1.0: 15 ports detected [ 0.892420] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.892422] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.892447] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.892448] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.892449] usb usb4: Product: xHCI Host Controller [ 0.892450] usb usb4: Manufacturer: Linux 4.15.4-041504-generic xhci-hcd [ 0.892451] usb usb4: SerialNumber: 0000:00:14.0 [ 0.892588] hub 4-0:1.0: USB hub found [ 0.892598] hub 4-0:1.0: 6 ports detected [ 0.893054] i8042: PNP: No PS/2 controller found. [ 0.893256] mousedev: PS/2 mouse device common for all mice [ 0.893413] rtc_cmos 00:02: RTC can wake from S4 [ 0.893529] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.893553] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.893557] i2c /dev entries driver [ 0.893588] device-mapper: uevent: version 1.0.3 [ 0.893661] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.893664] intel_pstate: Intel P-state driver initializing [ 0.893880] ledtrig-cpu: registered to indicate activity on CPUs [ 0.894331] NET: Registered protocol family 10 [ 0.897198] Segment Routing with IPv6 [ 0.897220] NET: Registered protocol family 17 [ 0.897323] Key type dns_resolver registered [ 0.897554] RAS: Correctable Errors collector initialized. [ 0.897589] microcode: sig=0x306c3, pf=0x2, revision=0x22 [ 0.897644] microcode: Microcode Update Driver: v2.2. [ 0.897650] sched_clock: Marking stable (897641595, 0)->(873714058, 23927537) [ 0.897811] registered taskstats version 1 [ 0.897818] Loading compiled-in X.509 certificates [ 0.899564] Loaded X.509 cert 'Build time autogenerated kernel key: e4e76b371d70cf103d3abd5868da48c8ffe31301' [ 0.899578] zswap: loaded using pool lzo/zbud [ 0.902028] Key type big_key registered [ 0.902030] Key type trusted registered [ 0.903225] Key type encrypted registered [ 0.903226] AppArmor: AppArmor sha1 policy hashing enabled [ 0.903228] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.903240] evm: HMAC attrs: 0x1 [ 0.903553] Magic number: 6:523:222 [ 0.903649] rtc_cmos 00:02: setting system clock to 2018-02-19 09:14:56 UTC (1519031696) [ 0.903700] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.903701] EDD information not available. [ 0.905496] Freeing unused kernel memory: 2388K [ 0.905496] Write protecting the kernel read-only data: 20480k [ 0.905852] Freeing unused kernel memory: 2008K [ 0.908915] Freeing unused kernel memory: 1948K [ 0.913029] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.913030] x86/mm: Checking user space page tables [ 0.917040] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.965811] pps_core: LinuxPPS API ver. 1 registered [ 0.965812] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.966565] PTP clock support registered [ 0.969949] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.969949] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.970100] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.995611] checking generic (f1000000 500000) vs hw (e0000000 10000000) [ 0.995613] checking generic (f1000000 500000) vs hw (f0000000 2000000) [ 0.995613] fb: switching to nouveaufb from VESA VGA [ 0.995627] Console: switching to colour dummy device 80x25 [ 0.995734] nouveau 0000:01:00.0: NVIDIA GK107 (0e7010a2) [ 1.066409] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.110387] nouveau 0000:01:00.0: bios: version 80.07.26.00.26 [ 1.111768] nouveau 0000:01:00.0: fb: 2048 MiB DDR3 [ 1.151213] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:17:eb:a2:58:70 [ 1.151214] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.151280] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.151335] ahci 0000:00:1f.2: version 3.0 [ 1.151556] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode [ 1.151558] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.151941] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 1.172507] scsi host0: ahci [ 1.172698] scsi host1: ahci [ 1.172852] scsi host2: ahci [ 1.172998] scsi host3: ahci [ 1.173124] scsi host4: ahci [ 1.173194] scsi host5: ahci [ 1.173226] ata1: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136100 irq 31 [ 1.173228] ata2: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136180 irq 31 [ 1.173230] ata3: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136200 irq 31 [ 1.173230] ata4: DUMMY [ 1.173231] ata5: DUMMY [ 1.173231] ata6: DUMMY [ 1.176405] [TTM] Zone kernel: Available graphics memory: 4054836 kiB [ 1.176406] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.176406] [TTM] Initializing pool allocator [ 1.176408] [TTM] Initializing DMA pool allocator [ 1.176418] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 1.176419] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 1.176421] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 1.176422] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 1.176424] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000f00 00000000 [ 1.176425] nouveau 0000:01:00.0: DRM: DCB outp 01: 01011f22 00020030 [ 1.176426] nouveau 0000:01:00.0: DRM: DCB outp 02: 08022f82 00020030 [ 1.176427] nouveau 0000:01:00.0: DRM: DCB outp 03: 02033f62 00020010 [ 1.176428] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000000 [ 1.176429] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001131 [ 1.176430] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002231 [ 1.176431] nouveau 0000:01:00.0: DRM: DCB conn 03: 00010361 [ 1.181586] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.181586] [drm] Driver supports precise vblank timestamp query. [ 1.183028] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 1.216005] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.224009] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.257257] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo 00000000abbf48f4 [ 1.260112] fbcon: nouveaufb (fb0) is primary device [ 1.365036] Console: switching to colour frame buffer device 240x67 [ 1.372364] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.372365] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.372608] hub 1-1:1.0: USB hub found [ 1.372712] hub 1-1:1.0: 6 ports detected [ 1.380471] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.380472] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.380942] hub 2-1:1.0: USB hub found [ 1.381076] hub 2-1:1.0: 8 ports detected [ 1.417965] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 1.451981] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 1.486759] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.486775] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.486789] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.487608] ata1.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133 [ 1.487610] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.488044] ata2.00: ATA-8: TOSHIBA HDWD120, MX4OACF0, max UDMA/133 [ 1.488046] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.488283] ata1.00: configured for UDMA/133 [ 1.488444] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5 [ 1.488671] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.488725] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.488726] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.488756] sd 0:0:0:0: [sda] Write Protect is off [ 1.488758] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.488803] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.489318] ata2.00: configured for UDMA/133 [ 1.489408] scsi 1:0:0:0: Direct-Access ATA TOSHIBA HDWD120 ACF0 PQ: 0 ANSI: 5 [ 1.489525] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.489557] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.489558] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.489567] sd 1:0:0:0: [sdb] Write Protect is off [ 1.489568] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.489609] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.491132] ata3.00: ATAPI: PLDS DVD+/-RW DH-16AES, 3D11, max UDMA/100 [ 1.492082] ata3.00: configured for UDMA/100 [ 1.494128] scsi 2:0:0:0: CD-ROM PLDS DVD+-RW DH-16AES 3D11 PQ: 0 ANSI: 5 [ 1.504217] sdb: sdb1 [ 1.504720] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.509477] sda: sda1 sda2 sda3 [ 1.510065] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.561919] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.561920] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.562059] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.562109] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 1.663970] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 1.675939] usb 2-1.3: new low-speed USB device number 3 using ehci-pci [ 1.692005] tsc: Refined TSC clocksource calibration: 3192.608 MHz [ 1.692010] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0502f3f6b, max_idle_ns: 440795217409 ns [ 1.792468] usb 1-1.4: New USB device found, idVendor=148f, idProduct=5572 [ 1.792469] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.792471] usb 1-1.4: Product: 802.11 n WLAN [ 1.792472] usb 1-1.4: Manufacturer: Ralink [ 1.792473] usb 1-1.4: SerialNumber: 1.0 [ 1.793209] usb 2-1.3: New USB device found, idVendor=0529, idProduct=0001 [ 1.793210] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.793211] usb 2-1.3: Product: HASP HL 3.25 [ 1.793213] usb 2-1.3: Manufacturer: AKS [ 1.871974] usb 2-1.4: new full-speed USB device number 4 using ehci-pci [ 1.871985] usb 1-1.5: new full-speed USB device number 4 using ehci-pci [ 1.983680] usb 1-1.5: New USB device found, idVendor=046d, idProduct=c52b [ 1.983682] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.983683] usb 1-1.5: Product: USB Receiver [ 1.983694] usb 1-1.5: Manufacturer: Logitech [ 1.986785] usb 2-1.4: New USB device found, idVendor=045e, idProduct=07b1 [ 1.986787] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.986788] usb 2-1.4: Product: Microsoft® Nano Transceiver v1.0 [ 1.986789] usb 2-1.4: Manufacturer: Microsoft [ 1.987298] hidraw: raw HID events driver (C) Jiri Kosina [ 1.987735] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 2.004124] usbcore: registered new interface driver usbhid [ 2.004125] usbhid: USB HID core driver [ 2.005521] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:045E:07B1.0004/input/input2 [ 2.005667] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input2 [ 2.064214] hid-generic 0003:045E:07B1.0004: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1d.0-1.4/input0 [ 2.064381] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:045E:07B1.0005/input/input3 [ 2.064677] hid-generic 0003:045E:07B1.0005: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1d.0-1.4/input1 [ 2.064975] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:045E:07B1.0006/input/input4 [ 2.124147] hid-generic 0003:045E:07B1.0006: input,hiddev1,hidraw3: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1d.0-1.4/input2 [ 2.716111] clocksource: Switched to clocksource tsc [ 3.092456] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.145552] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 3.164045] systemd[1]: Detected architecture x86-64. [ 3.180086] systemd[1]: Set hostname to . [ 3.481598] random: crng init done [ 4.322201] systemd[1]: Reached target User and Group Name Lookups. [ 4.322264] systemd[1]: Listening on udev Kernel Socket. [ 4.322302] systemd[1]: Listening on Journal Socket. [ 4.322324] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.322342] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.322361] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.322470] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.936794] lp: driver loaded but no devices found [ 5.038649] ppdev: user-space parallel port driver [ 5.483543] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 5.602675] systemd-journald[293]: Received request to flush runtime journal from PID 1 [ 5.714128] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 6.680647] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 6.680648] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.680649] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.680649] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.680650] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 7.011778] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247) [ 7.011783] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.011786] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 7.011788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.011789] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 7.011792] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 7.011794] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.011795] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 7.011797] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 7.011800] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.011800] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 7.289979] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.691975] AVX2 version of gcm_enc/dec engaged. [ 7.691975] AES CTR mode by8 optimization enabled [ 8.677868] audit: type=1400 audit(1519031704.268:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=534 comm="apparmor_parser" [ 8.677871] audit: type=1400 audit(1519031704.268:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=534 comm="apparmor_parser" [ 8.677872] audit: type=1400 audit(1519031704.268:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//snap_update_ns" pid=534 comm="apparmor_parser" [ 8.714113] audit: type=1400 audit(1519031704.304:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=533 comm="apparmor_parser" [ 8.714115] audit: type=1400 audit(1519031704.304:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=533 comm="apparmor_parser" [ 8.714117] audit: type=1400 audit(1519031704.304:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=533 comm="apparmor_parser" [ 8.714118] audit: type=1400 audit(1519031704.304:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=533 comm="apparmor_parser" [ 8.714639] audit: type=1400 audit(1519031704.304:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=537 comm="apparmor_parser" [ 8.768982] audit: type=1400 audit(1519031704.360:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=560 comm="apparmor_parser" [ 8.769522] audit: type=1400 audit(1519031704.360:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=562 comm="apparmor_parser" [ 8.944498] snd_hda_intel 0000:01:00.1: Disabling MSI [ 8.944502] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 8.993591] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 8.993593] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 8.993594] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 8.993595] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 8.993596] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 8.993597] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x1a [ 8.993598] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 9.040985] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 9.041016] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 9.041044] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 9.041071] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 9.656351] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9 [ 9.656383] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 9.656412] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 10.090399] input: Logitech K800 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:2010.0007/input/input12 [ 10.090509] logitech-hidpp-device 0003:046D:2010.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K800] on usb-0000:00:1a.0-1.5:1 [ 10.118423] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.119897] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.156968] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 10.156969] cfg80211: failed to load regulatory.db [ 10.342414] intel_rapl: Found RAPL domain package [ 10.342415] intel_rapl: Found RAPL domain core [ 10.342416] intel_rapl: Found RAPL domain dram [ 10.342419] intel_rapl: RAPL package 0 domain package locked by BIOS [ 10.342421] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 10.376765] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 11.103961] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci [ 11.221322] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected [ 11.249532] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000f detected [ 11.275025] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.275237] usbcore: registered new interface driver rt2800usb [ 11.680514] rt2800usb 1-1.4:1.0 wlx7cdd90d82604: renamed from wlan0 [ 20.141871] kauditd_printk_skb: 24 callbacks suppressed [ 20.141872] audit: type=1400 audit(1519031715.732:36): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.yakyak.yakyak" pid=1044 comm="apparmor_parser" [ 20.733141] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 20.948117] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 20.970802] audit: type=1400 audit(1519031716.560:37): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.atom.apm" pid=1106 comm="apparmor_parser" [ 20.972564] audit: type=1400 audit(1519031716.564:38): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.atom.atom" pid=1111 comm="apparmor_parser" [ 21.047292] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90d82604: link is not ready [ 21.047325] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 21.076017] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 21.407319] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90d82604: link is not ready [ 22.405270] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90d82604: link is not ready [ 22.995373] audit: type=1400 audit(1519031718.584:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=1173 comm="apparmor_parser" [ 23.016188] audit: type=1400 audit(1519031718.608:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1173 comm="apparmor_parser" [ 23.016284] audit: type=1400 audit(1519031718.608:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//snap_update_ns" pid=1173 comm="apparmor_parser" [ 23.100837] audit: type=1400 audit(1519031718.692:42): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=1216 comm="apparmor_parser" [ 23.406520] audit: type=1400 audit(1519031718.996:43): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.glances.glances" pid=1237 comm="apparmor_parser" [ 23.741553] audit: type=1400 audit(1519031719.332:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.hiri.hiri" pid=1264 comm="apparmor_parser" [ 24.049969] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 24.050001] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 24.091498] audit: type=1400 audit(1519031719.684:45): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.pycharm-community.pycharm-community" pid=1289 comm="apparmor_parser" [ 38.133883] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [ 38.219703] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [ 38.220313] wlx7cdd90d82604: authenticated [ 38.224288] wlx7cdd90d82604: associate with 90:4d:4a:13:6f:d9 (try 1/3) [ 38.225063] wlx7cdd90d82604: RX AssocResp from 90:4d:4a:13:6f:d9 (capab=0x11 status=0 aid=4) [ 38.235441] wlx7cdd90d82604: associated [ 38.337339] wlx7cdd90d82604: Limiting TX power to 23 (23 - 0) dBm as advertised by 90:4d:4a:13:6f:d9 [ 38.382724] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd90d82604: link becomes ready [ 48.814435] rfkill: input handler disabled [ 50.298423] kauditd_printk_skb: 1 callbacks suppressed [ 50.298424] audit: type=1400 audit(1519031746.021:47): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3838 comm="apparmor_parser" [ 53.508550] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 53.593929] Bridge firewalling registered [ 53.701810] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 55.101448] Initializing XFRM netlink socket [ 55.149956] Netfilter messages via NETLINK v0.30. [ 55.156560] ctnetlink v0.93: registering with nfnetlink. [ 55.480861] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 76.636338] vboxdrv: loading out-of-tree module taints kernel. [ 76.636339] Spectre V2 : System may be vulnerable to spectre v2 [ 76.636342] vboxdrv: loading module not compiled with retpoline compiler. [ 76.636494] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 76.641610] vboxdrv: Found 4 processor cores [ 76.660792] vboxdrv: TSC mode is Invariant, tentative frequency 3191406620 Hz [ 76.660793] vboxdrv: Successfully loaded version 5.2.6 (interface 0x00290000) [ 76.866699] Spectre V2 : System may be vulnerable to spectre v2 [ 76.866708] vboxnetflt: loading module not compiled with retpoline compiler. [ 76.867515] VBoxNetFlt: Successfully started. [ 76.870099] Spectre V2 : System may be vulnerable to spectre v2 [ 76.870104] vboxnetadp: loading module not compiled with retpoline compiler. [ 76.870558] VBoxNetAdp: Successfully started. [ 76.872750] Spectre V2 : System may be vulnerable to spectre v2 [ 76.872753] vboxpci: loading module not compiled with retpoline compiler. [ 76.873024] VBoxPciLinuxInit [ 76.875025] vboxpci: IOMMU not found (not registered) [ 196.544293] logitech-hidpp-device 0003:046D:2010.0007: HID++ 1.0 device connected. [ 8415.440388] wlx7cdd90d82604: deauthenticated from 90:4d:4a:13:6f:d9 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [ 8415.545330] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [ 8415.590558] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [ 8416.431059] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 2/3) [ 8417.429130] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 3/3) [ 8418.447001] wlx7cdd90d82604: authentication with 90:4d:4a:13:6f:d9 timed out [ 8426.917996] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [ 8427.000658] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [ 8427.026556] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 2/3) [ 8427.059442] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 3/3) [ 8427.094079] wlx7cdd90d82604: authentication with 90:4d:4a:13:6f:d9 timed out [ 8433.677493] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90d82604: link is not ready [ 8443.932899] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [ 8444.015360] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [ 8444.015943] wlx7cdd90d82604: authenticated [ 8444.018481] wlx7cdd90d82604: associate with 90:4d:4a:13:6f:d9 (try 1/3) [ 8444.019297] wlx7cdd90d82604: RX AssocResp from 90:4d:4a:13:6f:d9 (capab=0x11 status=0 aid=4) [ 8444.029658] wlx7cdd90d82604: associated [ 8444.030339] wlx7cdd90d82604: Limiting TX power to 23 (23 - 0) dBm as advertised by 90:4d:4a:13:6f:d9 [ 8444.268330] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd90d82604: link becomes ready [ 8727.363287] nouveau 0000:01:00.0: Direct firmware load for nouveau/nve7_fuc084 failed with error -2 [ 8727.363292] nouveau 0000:01:00.0: Direct firmware load for nouveau/nve7_fuc084d failed with error -2 [ 8727.363294] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 8727.363296] nouveau 0000:01:00.0: msvld: init failed, -19 [10167.631766] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90d82604: link is not ready [10372.483679] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [10372.548215] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [10372.548719] wlx7cdd90d82604: authenticated [10372.551587] wlx7cdd90d82604: associate with 90:4d:4a:13:6f:d9 (try 1/3) [10372.552410] wlx7cdd90d82604: RX AssocResp from 90:4d:4a:13:6f:d9 (capab=0x11 status=0 aid=4) [10372.565062] wlx7cdd90d82604: associated [10372.587176] wlx7cdd90d82604: Limiting TX power to 23 (23 - 0) dBm as advertised by 90:4d:4a:13:6f:d9 [10372.678952] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd90d82604: link becomes ready [10425.854339] wlx7cdd90d82604: deauthenticated from 90:4d:4a:13:6f:d9 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [10425.995710] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [10426.040984] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [10426.041481] wlx7cdd90d82604: authenticated [10426.042232] wlx7cdd90d82604: associate with 90:4d:4a:13:6f:d9 (try 1/3) [10426.042975] wlx7cdd90d82604: RX AssocResp from 90:4d:4a:13:6f:d9 (capab=0x11 status=0 aid=1) [10426.053378] wlx7cdd90d82604: associated [10426.129589] wlx7cdd90d82604: Limiting TX power to 23 (23 - 0) dBm as advertised by 90:4d:4a:13:6f:d9 [10446.603600] wlx7cdd90d82604: deauthenticated from 90:4d:4a:13:6f:d9 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [10446.751117] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [10446.796262] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [10446.797925] wlx7cdd90d82604: authenticated [10446.801764] wlx7cdd90d82604: associate with 90:4d:4a:13:6f:d9 (try 1/3) [10446.802567] wlx7cdd90d82604: RX AssocResp from 90:4d:4a:13:6f:d9 (capab=0x11 status=0 aid=3) [10446.813176] wlx7cdd90d82604: associated [10446.884951] wlx7cdd90d82604: Limiting TX power to 23 (23 - 0) dBm as advertised by 90:4d:4a:13:6f:d9 [10459.047688] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [10459.134621] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [10459.135474] wlx7cdd90d82604: authenticated [10459.137437] wlx7cdd90d82604: associate with 90:4d:4a:13:6f:d9 (try 1/3) [10459.138113] wlx7cdd90d82604: RX AssocResp from 90:4d:4a:13:6f:d9 (capab=0x11 status=0 aid=3) [10459.148613] wlx7cdd90d82604: associated [10459.198783] wlx7cdd90d82604: Limiting TX power to 23 (23 - 0) dBm as advertised by 90:4d:4a:13:6f:d9 [10466.625822] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90d82604: link is not ready [10466.660964] wlx7cdd90d82604: deauthenticating from 90:4d:4a:13:6f:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [10474.715820] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [10474.788539] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [10474.846319] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 2/3) [10474.871945] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 3/3) [10474.906071] wlx7cdd90d82604: authentication with 90:4d:4a:13:6f:d9 timed out [10483.330486] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [10483.412756] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [10483.459018] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 2/3) [10483.501189] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 3/3) [10483.512889] wlx7cdd90d82604: authentication with 90:4d:4a:13:6f:d9 timed out [10492.458943] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [10492.541647] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [10492.575412] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 2/3) [10492.615562] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 3/3) [10492.646070] wlx7cdd90d82604: authentication with 90:4d:4a:13:6f:d9 timed out [10499.587148] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90d82604: link is not ready [10513.482080] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [10513.566027] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [10513.566793] wlx7cdd90d82604: authenticated [10513.568277] wlx7cdd90d82604: associate with 90:4d:4a:13:6f:d9 (try 1/3) [10513.569045] wlx7cdd90d82604: RX AssocResp from 90:4d:4a:13:6f:d9 (capab=0x11 status=0 aid=3) [10513.579644] wlx7cdd90d82604: associated [10513.584801] wlx7cdd90d82604: Limiting TX power to 23 (23 - 0) dBm as advertised by 90:4d:4a:13:6f:d9 [10514.377633] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd90d82604: link becomes ready [11126.273177] wlx7cdd90d82604: deauthenticated from 90:4d:4a:13:6f:d9 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [11126.426741] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [11126.478369] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [11126.511452] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 2/3) [11126.528456] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 3/3) [11126.564038] wlx7cdd90d82604: authentication with 90:4d:4a:13:6f:d9 timed out [11135.039062] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [11135.121498] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [11135.121984] wlx7cdd90d82604: authenticated [11135.124875] wlx7cdd90d82604: associate with 90:4d:4a:13:6f:d9 (try 1/3) [11135.125603] wlx7cdd90d82604: RX AssocResp from 90:4d:4a:13:6f:d9 (capab=0x11 status=0 aid=1) [11135.135997] wlx7cdd90d82604: associated [11135.144457] wlx7cdd90d82604: Limiting TX power to 23 (23 - 0) dBm as advertised by 90:4d:4a:13:6f:d9 [11139.790483] wlx7cdd90d82604: deauthenticated from 90:4d:4a:13:6f:d9 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [11139.942665] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [11139.987988] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [11139.988564] wlx7cdd90d82604: authenticated [11139.988725] wlx7cdd90d82604: associate with 90:4d:4a:13:6f:d9 (try 1/3) [11139.989476] wlx7cdd90d82604: RX AssocResp from 90:4d:4a:13:6f:d9 (capab=0x11 status=0 aid=1) [11139.999834] wlx7cdd90d82604: associated [11139.999853] wlx7cdd90d82604: Limiting TX power to 23 (23 - 0) dBm as advertised by 90:4d:4a:13:6f:d9 [11150.000628] wlx7cdd90d82604: deauthenticating from 90:4d:4a:13:6f:d9 by local choice (Reason: 3=DEAUTH_LEAVING) [11158.123026] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [11158.208774] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [11158.312324] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 2/3) [11158.334797] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 3/3) [11158.375296] wlx7cdd90d82604: authentication with 90:4d:4a:13:6f:d9 timed out [11165.600232] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd90d82604: link is not ready [11179.227569] wlx7cdd90d82604: authenticate with 90:4d:4a:13:6f:d9 [11179.295773] wlx7cdd90d82604: send auth to 90:4d:4a:13:6f:d9 (try 1/3) [11179.296267] wlx7cdd90d82604: authenticated [11179.299828] wlx7cdd90d82604: associate with 90:4d:4a:13:6f:d9 (try 1/3) [11179.300706] wlx7cdd90d82604: RX AssocResp from 90:4d:4a:13:6f:d9 (capab=0x11 status=0 aid=3) [11179.312369] wlx7cdd90d82604: associated [11179.347574] wlx7cdd90d82604: Limiting TX power to 23 (23 - 0) dBm as advertised by 90:4d:4a:13:6f:d9 [11179.426376] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd90d82604: link becomes ready