[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0 [ 0.000000] Linux version 4.13.0-22-generic (buildd@lgw01-amd64-037) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #25-Ubuntu SMP Tue Dec 19 11:13:36 UTC 2017 (Ubuntu 4.13.0-22.25-generic 4.13.13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-22-generic root=UUID=960b0268-814a-44f0-9d9d-a1a91b01d73f ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000766b9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000766ba000-0x00000000766bafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000766bb000-0x00000000766bbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000766bc000-0x000000007bc8efff] usable [ 0.000000] BIOS-e820: [mem 0x000000007bc8f000-0x000000007c747fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c748000-0x000000007c8d2fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007c8d3000-0x000000007cfb9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007cfba000-0x000000007d3fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007d3fe000-0x000000007d3fefff] usable [ 0.000000] BIOS-e820: [mem 0x000000007d3ff000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Micro-Star International Co., Ltd. PE62 7RD/MS-16J9, BIOS E16J9IMS.31A 07/11/2017 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x47f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000000] 1 base 007E000000 mask 7FFE000000 uncachable [ 0.000000] 2 base 007D800000 mask 7FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x7d3ff max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcc50-0x000fcc5f] mapped at [ffff8810800fcc50] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff881080096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x143123000, 0x143123fff] PGTABLE [ 0.000000] BRK [0x143124000, 0x143124fff] PGTABLE [ 0.000000] BRK [0x143125000, 0x143125fff] PGTABLE [ 0.000000] BRK [0x143126000, 0x143126fff] PGTABLE [ 0.000000] BRK [0x143127000, 0x143127fff] PGTABLE [ 0.000000] BRK [0x143128000, 0x143128fff] PGTABLE [ 0.000000] BRK [0x143129000, 0x143129fff] PGTABLE [ 0.000000] BRK [0x14312a000, 0x14312afff] PGTABLE [ 0.000000] BRK [0x14312b000, 0x14312bfff] PGTABLE [ 0.000000] BRK [0x14312c000, 0x14312cfff] PGTABLE [ 0.000000] BRK [0x14312d000, 0x14312dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3112b000-0x3488cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 MSI_NB) [ 0.000000] ACPI: XSDT 0x000000007C8D30B0 0000E4 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007C8FB3C0 000114 (v06 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000007C8D3230 02818E (v02 MSI_NB MEGABOOK 01072009 INTL 20160422) [ 0.000000] ACPI: FACS 0x000000007CFA1C40 000040 [ 0.000000] ACPI: APIC 0x000000007C8FB4D8 0000BC (v03 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007C8FB598 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: ECDT 0x000000007C8FB5E0 0000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00010013) [ 0.000000] ACPI: MCFG 0x000000007C8FB6A8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x000000007C8FB6E8 000322 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.000000] ACPI: FIDT 0x000000007C8FBA10 00009C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: SLIC 0x000000007C8FBAB0 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x000000007C8FBC28 00317F (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x000000007C8FEDA8 002771 (v02 PegSsd PegSsdt 00001000 INTL 20160422) [ 0.000000] ACPI: HPET 0x000000007C901520 000038 (v01 INTEL KBL 00000001 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000007C901558 005DFB (v02 INTEL RV11Rtd3 00001000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x000000007C907358 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422) [ 0.000000] ACPI: UEFI 0x000000007C908140 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x000000007C908188 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: LPIT 0x000000007C909068 000094 (v01 INTEL KBL 00000000 MSFT 0000005F) [ 0.000000] ACPI: WSMT 0x000000007C909100 000028 (v01 INTEL KBL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000007C909128 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.000000] ACPI: DBGP 0x000000007C9093C8 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x000000007C909400 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000007C909458 0000AE (v02 SgRef SgPeg 00001000 INTL 20160422) [ 0.000000] ACPI: TPM2 0x000000007C909508 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.000000] ACPI: SSDT 0x000000007C909540 001A94 (v01 OptRef OptTabl 00001000 INTL 20160422) [ 0.000000] ACPI: ASF! 0x000000007C90AFD8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x47efd5000-0x47effffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000047effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000766b9fff] [ 0.000000] node 0: [mem 0x00000000766bc000-0x000000007bc8efff] [ 0.000000] node 0: [mem 0x000000007c748000-0x000000007c8d2fff] [ 0.000000] node 0: [mem 0x000000007d3fe000-0x000000007d3fefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047effffff] [ 0.000000] On node 0 totalpages: 4173236 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7865 pages used for memmap [ 0.000000] DMA32 zone: 503321 pages, LIFO batch:31 [ 0.000000] Normal zone: 57280 pages used for memmap [ 0.000000] Normal zone: 3665920 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007e000000-0x000000007fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x766ba000-0x766bafff] [ 0.000000] PM: Registered nosave memory: [mem 0x766bb000-0x766bbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bc8f000-0x7c747fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7c8d3000-0x7cfb9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7cfba000-0x7d3fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7d3ff000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff8814fec00000 s119704 r8192 d31848 u262144 [ 0.000000] pcpu-alloc: s119704 r8192 d31848 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4108006 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-22-generic root=UUID=960b0268-814a-44f0-9d9d-a1a91b01d73f ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16284876K/16692944K available (9294K kernel code, 2479K rwdata, 3996K rodata, 2324K init, 2384K bss, 408068K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 37783 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] tsc: Detected 2800.000 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.00 BogoMIPS (lpj=11232000) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.037520] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.037543] Security Framework initialized [ 0.037544] Yama: becoming mindful. [ 0.037560] AppArmor: AppArmor initialized [ 0.039475] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.040448] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.040481] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.040511] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.040665] CPU: Physical Processor ID: 0 [ 0.040666] CPU: Processor Core ID: 0 [ 0.040669] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.040670] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.040674] mce: CPU supports 10 MCE banks [ 0.040682] CPU0: Thermal monitoring enabled (TM1) [ 0.040699] process: using mwait in idle threads [ 0.040701] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.040702] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.040810] Freeing SMP alternatives memory: 36K [ 0.042468] smpboot: Max logical packages: 2 [ 0.043670] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.047741] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.087458] TSC deadline timer enabled [ 0.087463] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9) [ 0.087507] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.087533] ... version: 4 [ 0.087533] ... bit width: 48 [ 0.087534] ... generic registers: 4 [ 0.087534] ... value mask: 0000ffffffffffff [ 0.087535] ... max period: 00007fffffffffff [ 0.087535] ... fixed-purpose events: 3 [ 0.087536] ... event mask: 000000070000000f [ 0.087564] Hierarchical SRCU implementation. [ 0.088000] smp: Bringing up secondary CPUs ... [ 0.088000] x86: Booting SMP configuration: [ 0.088000] .... node #0, CPUs: #1 [ 0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.088000] #2 #3 #4 #5 #6 #7 [ 0.088498] smp: Brought up 1 node, 8 CPUs [ 0.088498] smpboot: Total of 8 processors activated (44928.00 BogoMIPS) [ 0.092366] devtmpfs: initialized [ 0.092366] x86/mm: Memory block size: 128MB [ 0.092934] evm: security.selinux [ 0.092934] evm: security.SMACK64 [ 0.092935] evm: security.SMACK64EXEC [ 0.092935] evm: security.SMACK64TRANSMUTE [ 0.092935] evm: security.SMACK64MMAP [ 0.092936] evm: security.ima [ 0.092936] evm: security.capability [ 0.092945] PM: Registering ACPI NVS region [mem 0x766ba000-0x766bafff] (4096 bytes) [ 0.092945] PM: Registering ACPI NVS region [mem 0x7c8d3000-0x7cfb9fff] (7237632 bytes) [ 0.092945] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.092945] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.092945] pinctrl core: initialized pinctrl subsystem [ 0.092945] RTC time: 4:50:02, date: 01/01/18 [ 0.092945] NET: Registered protocol family 16 [ 0.092945] cpuidle: using governor ladder [ 0.092945] cpuidle: using governor menu [ 0.092945] PCCT header not found. [ 0.092945] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.092945] ACPI: bus type PCI registered [ 0.092945] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.092945] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.092945] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.092945] PCI: Using configuration type 1 for base access [ 0.092978] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.092978] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.092979] ACPI: Added _OSI(Module Device) [ 0.092979] ACPI: Added _OSI(Processor Device) [ 0.092979] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.092979] ACPI: Added _OSI(Processor Aggregator Device) [ 0.092979] ACPI: EC: EC started [ 0.092979] ACPI: EC: interrupt blocked [ 0.097577] ACPI Error: [^^^PEG0.PEGP.EASP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364) [ 0.097583] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC._REG, AE_NOT_FOUND (20170531/psparse-550) [ 0.097597] ACPI: \: Used as first EC [ 0.097598] ACPI: \: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.097599] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.098616] ACPI: Executed 42 blocks of module-level executable AML code [ 0.110078] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.116181] ACPI: Dynamic OEM Table Load: [ 0.116197] ACPI: SSDT 0xFFFF8814EC2D0800 000663 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.116197] ACPI: Executed 1 blocks of module-level executable AML code [ 0.116215] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.117096] ACPI: Dynamic OEM Table Load: [ 0.117101] ACPI: SSDT 0xFFFF8814EBCC7400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.117231] ACPI: Executed 1 blocks of module-level executable AML code [ 0.117302] ACPI: Dynamic OEM Table Load: [ 0.117302] ACPI: SSDT 0xFFFF8814EC103800 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.120217] ACPI: Executed 1 blocks of module-level executable AML code [ 0.120225] ACPI: Dynamic OEM Table Load: [ 0.120225] ACPI: SSDT 0xFFFF8814EBDDA600 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.120301] ACPI: Executed 1 blocks of module-level executable AML code [ 0.122261] ACPI: Interpreter enabled [ 0.122300] ACPI: (supports S0 S3 S4 S5) [ 0.122300] ACPI: Using IOAPIC for interrupt routing [ 0.122335] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.123125] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.123125] ACPI: Power Resource [PG00] (on) [ 0.184674] ACPI: Power Resource [PG01] (on) [ 0.185015] ACPI: Power Resource [PG02] (on) [ 0.185400] ACPI: Power Resource [PXP] (off) [ 0.185710] ACPI: Power Resource [WRST] (on) [ 0.185998] ACPI: Power Resource [WRST] (on) [ 0.186282] ACPI: Power Resource [WRST] (on) [ 0.186566] ACPI: Power Resource [WRST] (on) [ 0.186649] ACPI: Power Resource [PXP] (off) [ 0.186987] ACPI: Power Resource [WRST] (on) [ 0.187339] ACPI: Power Resource [WRST] (on) [ 0.187621] ACPI: Power Resource [WRST] (on) [ 0.187905] ACPI: Power Resource [WRST] (on) [ 0.188192] ACPI: Power Resource [WRST] (on) [ 0.188474] ACPI: Power Resource [WRST] (on) [ 0.188558] ACPI: Power Resource [PXP] (off) [ 0.188865] ACPI: Power Resource [WRST] (on) [ 0.188952] ACPI: Power Resource [PXP] (off) [ 0.189260] ACPI: Power Resource [WRST] (on) [ 0.189546] ACPI: Power Resource [WRST] (on) [ 0.189630] ACPI: Power Resource [PXP] (off) [ 0.189969] ACPI: Power Resource [WRST] (on) [ 0.190315] ACPI: Power Resource [WRST] (on) [ 0.190597] ACPI: Power Resource [WRST] (on) [ 0.190881] ACPI: Power Resource [WRST] (on) [ 0.191954] ACPI: Power Resource [WRST] (on) [ 0.192239] ACPI: Power Resource [WRST] (on) [ 0.192522] ACPI: Power Resource [WRST] (on) [ 0.196011] ACPI: Power Resource [PX01] (off) [ 0.200227] ACPI: Power Resource [PX02] (off) [ 0.200227] ACPI: Power Resource [PX03] (off) [ 0.200732] ACPI: Power Resource [PX04] (off) [ 0.200732] ACPI: Power Resource [PX05] (off) [ 0.200732] ACPI: Power Resource [PX06] (off) [ 0.204393] ACPI: Power Resource [USBC] (on) [ 0.204543] ACPI: Power Resource [PAUD] (on) [ 0.204993] ACPI: Power Resource [V0PR] (on) [ 0.205036] ACPI: Power Resource [V1PR] (on) [ 0.205077] ACPI: Power Resource [V2PR] (on) [ 0.208848] ACPI: Power Resource [PXTC] (on) [ 0.209388] ACPI: Power Resource [PXTC] (off) [ 0.215428] ACPI: Power Resource [FN00] (off) [ 0.215498] ACPI: Power Resource [FN01] (off) [ 0.215565] ACPI: Power Resource [FN02] (off) [ 0.215629] ACPI: Power Resource [FN03] (off) [ 0.215693] ACPI: Power Resource [FN04] (off) [ 0.216723] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.216728] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.218064] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.218065] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.218661] PCI host bridge to bus 0000:00 [ 0.218663] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.218664] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.218665] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.218666] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.218666] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff window] [ 0.218667] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.218669] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.218675] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000 [ 0.218969] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 0.219005] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.219159] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000 [ 0.219168] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit] [ 0.219172] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.219176] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.219350] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.219369] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit] [ 0.219428] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.219602] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 [ 0.219621] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit] [ 0.219774] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.219798] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit] [ 0.219865] pci 0000:00:16.0: PME# supported from D3hot [ 0.220005] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601 [ 0.220020] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff] [ 0.220026] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff] [ 0.220033] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.220039] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.220045] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.220051] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff] [ 0.220087] pci 0000:00:17.0: PME# supported from D3hot [ 0.220225] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 [ 0.220282] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.220425] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400 [ 0.220482] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.220634] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100 [ 0.220847] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.220861] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff] [ 0.221021] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300 [ 0.221047] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit] [ 0.221076] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit] [ 0.221122] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.221300] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.221359] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit] [ 0.221428] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.221641] pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030200 [ 0.221654] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff] [ 0.221661] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.221667] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.221672] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.221676] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref] [ 0.232010] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.232012] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.232014] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff] [ 0.232017] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.232080] pci 0000:02:00.0: [8086:24fb] type 00 class 0x028000 [ 0.232131] pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit] [ 0.232307] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.232445] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.232449] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff] [ 0.232505] pci 0000:03:00.0: [1969:10a1] type 00 class 0x020000 [ 0.232534] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf13ffff 64bit] [ 0.232544] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f] [ 0.232648] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.232741] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.232743] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.232745] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff] [ 0.236346] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.236388] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.236427] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.236466] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.236504] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.236543] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.236581] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.236620] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.237077] ACPI: EC: EC stopped [ 0.237077] ACPI: EC: EC started [ 0.237078] ACPI: EC: interrupt blocked [ 0.238597] ACPI: EC: interrupt unblocked [ 0.238610] ACPI: EC: event unblocked [ 0.238620] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.238621] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot ECDT EC to handle transactions and events [ 0.238704] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.238705] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events [ 0.238857] SCSI subsystem initialized [ 0.238868] libata version 3.00 loaded. [ 0.238868] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.238868] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.238868] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.238868] vgaarb: loaded [ 0.238868] ACPI: bus type USB registered [ 0.238868] usbcore: registered new interface driver usbfs [ 0.238868] usbcore: registered new interface driver hub [ 0.238868] usbcore: registered new device driver usb [ 0.238868] EDAC MC: Ver: 3.0.0 [ 0.238868] PCI: Using ACPI for IRQ routing [ 0.267079] PCI: pci_cache_line_size set to 64 bytes [ 0.267124] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff] [ 0.267125] e820: reserve RAM buffer [mem 0x766ba000-0x77ffffff] [ 0.267126] e820: reserve RAM buffer [mem 0x7bc8f000-0x7bffffff] [ 0.267126] e820: reserve RAM buffer [mem 0x7c8d3000-0x7fffffff] [ 0.267127] e820: reserve RAM buffer [mem 0x7d3ff000-0x7fffffff] [ 0.267127] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff] [ 0.267185] NetLabel: Initializing [ 0.267185] NetLabel: domain hash size = 128 [ 0.267186] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.267197] NetLabel: unlabeled traffic allowed by default [ 0.267206] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.267206] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.269026] clocksource: Switched to clocksource hpet [ 0.275691] VFS: Disk quotas dquot_6.6.0 [ 0.275706] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.275774] AppArmor: AppArmor Filesystem Enabled [ 0.275798] pnp: PnP ACPI init [ 0.275962] pnp 00:00: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active) [ 0.275992] pnp 00:01: Plug and Play ACPI device, IDs SYN1509 SYN1500 SYN0002 PNP0f13 (active) [ 0.276126] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.276127] system 00:02: [io 0xffff] has been reserved [ 0.276128] system 00:02: [io 0xffff] has been reserved [ 0.276128] system 00:02: [io 0xffff] has been reserved [ 0.276129] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.276130] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.276132] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.276209] system 00:03: [io 0x0800-0x087f] has been reserved [ 0.276211] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.276226] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.276251] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.276253] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.276777] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.276778] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.276779] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.276780] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.276781] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.276782] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.276783] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.276784] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.276785] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.276786] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.276788] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.276817] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.276818] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.276819] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.276820] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.276821] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.276822] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.276824] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.276825] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.277090] system 00:08: [io 0xff00-0xfffe] has been reserved [ 0.277091] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.278068] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.278069] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.278070] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.278072] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.278796] pnp: PnP ACPI: found 10 devices [ 0.286413] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.286430] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.286432] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.286434] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff] [ 0.286436] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.286439] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.286441] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff] [ 0.286446] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.286447] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.286450] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff] [ 0.286455] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.286456] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.286457] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.286458] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window] [ 0.286459] pci_bus 0000:00: resource 8 [mem 0xfc000000-0xfc00ffff window] [ 0.286459] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window] [ 0.286460] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.286461] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff] [ 0.286462] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.286463] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff] [ 0.286464] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.286464] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff] [ 0.286602] NET: Registered protocol family 2 [ 0.286724] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.286869] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.286950] TCP: Hash tables configured (established 131072 bind 65536) [ 0.286978] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.287011] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.287071] NET: Registered protocol family 1 [ 0.287082] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.287296] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.287298] PCI: CLS 64 bytes, default 64 [ 0.287323] Unpacking initramfs... [ 1.041888] Freeing initrd memory: 56712K [ 1.041929] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.041932] software IO TLB [mem 0x77c8f000-0x7bc8f000] (64MB) mapped at [ffff8810f7c8f000-ffff8810fbc8efff] [ 1.042159] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns [ 1.042360] Scanning for low memory corruption every 60 seconds [ 1.042642] audit: initializing netlink subsys (disabled) [ 1.042713] audit: type=2000 audit(1514782203.042:1): state=initialized audit_enabled=0 res=1 [ 1.043025] Initialise system trusted keyrings [ 1.043032] Key type blacklist registered [ 1.043083] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.043914] zbud: loaded [ 1.044215] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.044355] fuse init (API version 7.26) [ 1.046859] Key type asymmetric registered [ 1.046860] Asymmetric key parser 'x509' registered [ 1.046880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.046926] io scheduler noop registered [ 1.046926] io scheduler deadline registered [ 1.046944] io scheduler cfq registered (default) [ 1.047625] pcieport 0000:00:1c.0: AER enabled with IRQ 121 [ 1.047640] pcieport 0000:00:1c.3: AER enabled with IRQ 122 [ 1.047652] pcieport 0000:00:01.0: Signaling PME with IRQ 120 [ 1.047658] pcieport 0000:00:1c.0: Signaling PME with IRQ 121 [ 1.047664] pcieport 0000:00:1c.3: Signaling PME with IRQ 122 [ 1.047707] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.047707] vesafb: scrolling: redraw [ 1.047708] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.047717] vesafb: framebuffer at 0xb0000000, mapped to 0xffff9f5582800000, using 8128k, total 8128k [ 1.047801] Console: switching to colour frame buffer device 240x67 [ 1.047820] fb0: VESA VGA frame buffer device [ 1.047828] intel_idle: MWAIT substates: 0x11142120 [ 1.047829] intel_idle: v0.4.1 model 0x9E [ 1.048246] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.048542] ACPI: AC Adapter [ADP1] (on-line) [ 1.048801] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:49/PNP0C09:01/PNP0C0D:00/input/input0 [ 1.049067] ACPI: Lid Switch [LID0] [ 1.049095] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.049104] ACPI: Sleep Button [SLPB] [ 1.049121] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.049129] ACPI: Power Button [PWRB] [ 1.049147] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.049198] ACPI: Power Button [PWRF] [ 1.109173] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.109476] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.109477] ACPI: Thermal Zone [THRM] (31 C) [ 1.168327] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.168328] ACPI: Thermal Zone [TZ00] (28 C) [ 1.168454] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.168454] ACPI: Thermal Zone [TZ01] (30 C) [ 1.168517] GHES: HEST is not enabled! [ 1.168725] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.172043] Linux agpgart interface v0.103 [ 1.174872] loop: module loaded [ 1.174977] libphy: Fixed MDIO Bus: probed [ 1.174978] tun: Universal TUN/TAP device driver, 1.6 [ 1.175049] PPP generic driver version 2.4.2 [ 1.175141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.175143] ehci-pci: EHCI PCI platform driver [ 1.175148] ehci-platform: EHCI generic platform driver [ 1.175155] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.175156] ohci-pci: OHCI PCI platform driver [ 1.175161] ohci-platform: OHCI generic platform driver [ 1.175165] uhci_hcd: USB Universal Host Controller Interface driver [ 1.175289] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.175293] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.176369] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 1.176372] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.176435] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.176436] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.176437] usb usb1: Product: xHCI Host Controller [ 1.176438] usb usb1: Manufacturer: Linux 4.13.0-22-generic xhci-hcd [ 1.176439] usb usb1: SerialNumber: 0000:00:14.0 [ 1.176569] hub 1-0:1.0: USB hub found [ 1.176583] hub 1-0:1.0: 16 ports detected [ 1.177495] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.177497] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.177518] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.177519] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.177520] usb usb2: Product: xHCI Host Controller [ 1.177520] usb usb2: Manufacturer: Linux 4.13.0-22-generic xhci-hcd [ 1.177521] usb usb2: SerialNumber: 0000:00:14.0 [ 1.177642] hub 2-0:1.0: USB hub found [ 1.177651] hub 2-0:1.0: 8 ports detected [ 1.178262] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.182190] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.182193] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.182394] mousedev: PS/2 mouse device common for all mice [ 1.182817] rtc_cmos 00:04: RTC can wake from S4 [ 1.183202] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.183281] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.183284] i2c /dev entries driver [ 1.183318] device-mapper: uevent: version 1.0.3 [ 1.183395] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.183397] intel_pstate: Intel P-state driver initializing [ 1.183408] intel_pstate: Disabling energy efficiency optimization [ 1.184566] intel_pstate: HWP enabled [ 1.185162] ledtrig-cpu: registered to indicate activity on CPUs [ 1.186108] NET: Registered protocol family 10 [ 1.189435] Segment Routing with IPv6 [ 1.189446] NET: Registered protocol family 17 [ 1.189450] Key type dns_resolver registered [ 1.190235] RAS: Correctable Errors collector initialized. [ 1.190249] microcode: sig=0x906e9, pf=0x20, revision=0x5e [ 1.190602] microcode: Microcode Update Driver: v2.2. [ 1.190619] sched_clock: Marking stable (1190591746, 0)->(1194298748, -3707002) [ 1.190987] registered taskstats version 1 [ 1.190992] Loading compiled-in X.509 certificates [ 1.192497] Loaded X.509 cert 'Build time autogenerated kernel key: 2167202d8804238e39fcd8594bea62f050f2e6f0' [ 1.192509] zswap: loaded using pool lzo/zbud [ 1.193053] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.195190] Key type big_key registered [ 1.195192] Key type trusted registered [ 1.196829] Key type encrypted registered [ 1.196831] AppArmor: AppArmor sha1 policy hashing enabled [ 1.196833] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.196846] evm: HMAC attrs: 0x1 [ 1.197476] Magic number: 2:252:817 [ 1.197717] rtc_cmos 00:04: setting system clock to 2018-01-01 04:50:03 UTC (1514782203) [ 1.197885] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.197885] EDD information not available. [ 1.197910] PM: Hibernation image not present or could not be loaded. [ 1.280212] ACPI: Battery Slot [BAT1] (battery present) [ 1.281777] Freeing unused kernel memory: 2324K [ 1.281778] Write protecting the kernel read-only data: 14336k [ 1.282186] Freeing unused kernel memory: 932K [ 1.282423] Freeing unused kernel memory: 100K [ 1.283392] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.323718] hidraw: raw HID events driver (C) Jiri Kosina [ 1.343621] ahci 0000:00:17.0: version 3.0 [ 1.353127] nvidia: loading out-of-tree module taints kernel. [ 1.353131] nvidia: module license 'NVIDIA' taints kernel. [ 1.353132] Disabling lock debugging due to kernel taint [ 1.353953] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode [ 1.353956] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 1.353989] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [4c:cc:6a:e2:a6:0d] [ 1.364535] scsi host0: ahci [ 1.364700] scsi host1: ahci [ 1.364822] scsi host2: ahci [ 1.368069] scsi host3: ahci [ 1.368106] ata1: DUMMY [ 1.368107] ata2: DUMMY [ 1.368113] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 124 [ 1.368117] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 124 [ 1.392250] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 1.392715] alx 0000:03:00.0 enp3s0: renamed from eth0 [ 1.395947] nvidia-nvlink: Nvlink Core is being initialized, major device number 244 [ 1.396196] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.90 Tue Sep 19 19:17:35 PDT 2017 (using threaded interrupts) [ 1.397355] [drm] Memory usable by graphics device = 4096M [ 1.397357] checking generic (b0000000 7f0000) vs hw (b0000000 10000000) [ 1.397357] fb: switching to inteldrmfb from VESA VGA [ 1.397404] Console: switching to colour dummy device 80x25 [ 1.397522] [drm] Replacing VGA console driver [ 1.397542] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.90 Tue Sep 19 17:05:19 PDT 2017 [ 1.398054] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 1.398056] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1 [ 1.403449] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.403449] [drm] Driver supports precise vblank timestamp query. [ 1.412255] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1) [ 1.420527] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 1.422110] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.422336] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 1.422430] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 1.422448] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8 [ 1.471669] fbcon: inteldrmfb (fb0) is primary device [ 1.471729] Console: switching to colour frame buffer device 240x67 [ 1.471744] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.504063] usb 1-7: new full-speed USB device number 2 using xhci_hcd [ 1.647219] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00 [ 1.647221] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1 [ 1.647221] usb 1-7: Product: MSI EPF USB [ 1.647222] usb 1-7: Manufacturer: MSI EPF USB [ 1.647222] usb 1-7: SerialNumber: MSI EPF USB [ 1.680146] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.680165] ata4: SATA link down (SStatus 4 SControl 300) [ 1.681904] ata3.00: ATA-8: HGST HTS721010A9E630, JB0OA3U0, max UDMA/133 [ 1.681905] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.683777] ata3.00: configured for UDMA/133 [ 1.684112] scsi 2:0:0:0: Direct-Access ATA HGST HTS721010A9 A3U0 PQ: 0 ANSI: 5 [ 1.724388] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.724778] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.724779] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 1.724847] sd 2:0:0:0: [sda] Write Protect is off [ 1.724848] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.724992] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.764177] usb 1-8: new full-speed USB device number 3 using xhci_hcd [ 1.794416] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4 [ 1.794876] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.906942] usb 1-8: New USB device found, idVendor=046d, idProduct=c534 [ 1.906943] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.906944] usb 1-8: Product: USB Receiver [ 1.906945] usb 1-8: Manufacturer: Logitech [ 2.024068] usb 1-10: new full-speed USB device number 4 using xhci_hcd [ 2.044545] clocksource: Switched to clocksource tsc [ 2.057672] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728] [ 2.086703] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..] [ 2.086707] psmouse serio1: synaptics: Your touchpad (PNP: SYN1509 SYN1500 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 2.143565] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00323/0x840300/0x26800/0x0, board id: 3163, fw id: 2286728 [ 2.165640] usb 1-10: New USB device found, idVendor=8087, idProduct=0aa7 [ 2.165641] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.179822] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.288078] usb 1-11: new high-speed USB device number 5 using xhci_hcd [ 2.486416] usb 1-11: New USB device found, idVendor=04f2, idProduct=b521 [ 2.486417] usb 1-11: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.486418] usb 1-11: Product: USB 2.0 Webcam Device [ 2.486419] usb 1-11: Manufacturer: Generic [ 2.486419] usb 1-11: SerialNumber: 200901010001 [ 2.608032] usb 1-12: new high-speed USB device number 6 using xhci_hcd [ 2.748516] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129 [ 2.748517] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.748518] usb 1-12: Product: USB2.0-CRW [ 2.748519] usb 1-12: Manufacturer: Generic [ 2.748519] usb 1-12: SerialNumber: 20100201396000000 [ 2.752231] usbcore: registered new interface driver rtsx_usb [ 2.754406] usbcore: registered new interface driver usbhid [ 2.754407] usbhid: USB HID core driver [ 2.755382] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C534.0002/input/input9 [ 2.812338] hid-generic 0003:046D:C534.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-8/input0 [ 2.812495] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C534.0003/input/input10 [ 2.844475] [drm] RC6 on [ 2.872439] hid-generic 0003:046D:C534.0003: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input1 [ 3.108033] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 3.649996] random: crng init done [ 4.274510] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.350284] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 4.350424] systemd[1]: Detected architecture x86-64. [ 4.359711] systemd[1]: Set hostname to . [ 6.287739] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.287860] systemd[1]: Created slice User and Session Slice. [ 6.287867] systemd[1]: Reached target Remote File Systems. [ 6.287872] systemd[1]: Reached target User and Group Name Lookups. [ 6.287897] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.287918] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.287937] systemd[1]: Listening on udev Control Socket. [ 6.554282] lp: driver loaded but no devices found [ 6.597978] ppdev: user-space parallel port driver [ 7.503872] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 7.615328] Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k FS [ 13.040994] systemd-journald[294]: Received request to flush runtime journal from PID 1 [ 16.262661] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80 [ 16.262666] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80 [ 16.297599] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.357986] Bluetooth: Core ver 2.22 [ 16.357995] NET: Registered protocol family 31 [ 16.357995] Bluetooth: HCI device and connection manager initialized [ 16.357997] Bluetooth: HCI socket layer initialized [ 16.357998] Bluetooth: L2CAP socket layer initialized [ 16.358001] Bluetooth: SCO socket layer initialized [ 16.445612] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 16.559513] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 17.111749] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 17.111750] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 17.111750] RAPL PMU: hw unit of domain package 2^-14 Joules [ 17.111751] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 17.111751] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 17.111751] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 17.250849] Intel(R) Wireless WiFi driver for Linux [ 17.250850] Copyright(c) 2003- 2015 Intel Corporation [ 17.257025] Bluetooth: HCI UART driver ver 2.3 [ 17.257026] Bluetooth: HCI UART protocol H4 registered [ 17.257026] Bluetooth: HCI UART protocol BCSP registered [ 17.257033] Bluetooth: HCI UART protocol LL registered [ 17.257034] Bluetooth: HCI UART protocol ATH3K registered [ 17.257034] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 17.257053] Bluetooth: HCI UART protocol Intel registered [ 17.257060] Bluetooth: HCI UART protocol Broadcom registered [ 17.257061] Bluetooth: HCI UART protocol QCA registered [ 17.257061] Bluetooth: HCI UART protocol AG6XX registered [ 17.257061] Bluetooth: HCI UART protocol Marvell registered [ 17.430654] usbcore: registered new interface driver btusb [ 17.439441] Bluetooth: hci0: read Intel version: 370810225019140f00 [ 17.621824] AVX2 version of gcm_enc/dec engaged. [ 17.621825] AES CTR mode by8 optimization enabled [ 17.887850] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq [ 17.949823] iwlwifi 0000:02:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm [ 18.038314] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220 [ 18.055248] iwlwifi 0000:02:00.0: base HW address: 88:b1:11:b6:3c:ad [ 18.060044] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241 [ 18.080442] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 18.146486] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 18.146633] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 18.146642] thermal thermal_zone4: failed to read out thermal zone (-5) [ 18.232242] media: Linux media interface: v0.10 [ 18.297911] Linux video capture interface: v2.00 [ 18.431490] uvcvideo: Found UVC 1.00 device USB 2.0 Webcam Device (04f2:b521) [ 18.434264] uvcvideo 1-11:1.0: Entity type for entity Extension 5 was not initialized! [ 18.434265] uvcvideo 1-11:1.0: Entity type for entity Extension 2 was not initialized! [ 18.434266] uvcvideo 1-11:1.0: Entity type for entity Processing 3 was not initialized! [ 18.434267] uvcvideo 1-11:1.0: Entity type for entity Camera 1 was not initialized! [ 18.434303] input: USB 2.0 Webcam Device: USB 2.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input11 [ 18.434331] usbcore: registered new interface driver uvcvideo [ 18.434331] USB Video Class driver (1.1.1) [ 18.723129] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 19.560600] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=3 (0x15/0x1b/0x1a/0x0/0x0) type:speaker [ 19.560601] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 19.560602] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 19.560603] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 19.560603] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 19.560604] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 19.560605] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 19.560605] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 19.581755] input: MSI WMI hotkeys as /devices/virtual/input/input14 [ 19.618087] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 19.675685] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 19.675715] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 19.675741] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 19.675772] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 19.675799] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 19.675822] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 19.675844] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 19.992760] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 19.992799] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 19.992822] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 19.992842] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 19.992873] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 19.992902] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 19.992922] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 19.992944] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.353085] intel_rapl: Found RAPL domain package [ 21.353086] intel_rapl: Found RAPL domain core [ 21.353086] intel_rapl: Found RAPL domain uncore [ 21.353087] intel_rapl: Found RAPL domain dram [ 21.623257] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623323] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623365] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623404] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623442] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623480] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623517] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623555] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623592] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623629] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623667] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623704] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623741] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623779] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623816] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623853] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.623894] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 21.659270] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 22.454826] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 22.616826] audit: type=1400 audit(1514782224.919:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine" pid=1152 comm="apparmor_parser" [ 22.616829] audit: type=1400 audit(1514782224.919:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1152 comm="apparmor_parser" [ 22.616830] audit: type=1400 audit(1514782224.919:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3440/usr/lib/snapd/snap-confine//snap_update_ns" pid=1152 comm="apparmor_parser" [ 22.627721] audit: type=1400 audit(1514782224.930:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1158 comm="apparmor_parser" [ 22.627819] audit: type=1400 audit(1514782224.930:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1157 comm="apparmor_parser" [ 22.628541] audit: type=1400 audit(1514782224.930:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1160 comm="apparmor_parser" [ 22.659979] audit: type=1400 audit(1514782224.962:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1161 comm="apparmor_parser" [ 22.659982] audit: type=1400 audit(1514782224.962:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1161 comm="apparmor_parser" [ 22.660006] audit: type=1400 audit(1514782224.962:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=1161 comm="apparmor_parser" [ 22.662347] audit: type=1400 audit(1514782224.964:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1151 comm="apparmor_parser" [ 27.713186] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.713187] Bluetooth: BNEP filters: protocol multicast [ 27.713189] Bluetooth: BNEP socket layer initialized [ 28.135619] bbswitch: version 0.8 [ 28.135623] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 28.135627] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 28.135634] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 28.135708] bbswitch: detected an Optimus _DSM function [ 28.135714] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 31.835940] kauditd_printk_skb: 84 callbacks suppressed [ 31.835942] audit: type=1400 audit(1514782234.138:96): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.google-play-music-desktop-player.google-play-music-desktop-player" pid=1439 comm="apparmor_parser" [ 31.971682] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 31.972476] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 31.991368] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 32.057905] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 32.530296] audit: type=1400 audit(1514782234.832:97): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/1426/status" pid=1426 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=125 ouid=125 [ 32.530302] audit: type=1400 audit(1514782234.832:98): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/sys/devices/system/node/" pid=1426 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=125 ouid=0 [ 32.530360] audit: type=1400 audit(1514782234.832:99): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/1426/status" pid=1426 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=125 ouid=125 [ 32.802110] audit: type=1400 audit(1514782235.104:100): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.intellij-idea-community.intellij-idea-community" pid=1451 comm="apparmor_parser" [ 33.272639] audit: type=1400 audit(1514782235.574:101): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.magic-device-tool.magic-device-tool" pid=1460 comm="apparmor_parser" [ 33.576823] audit: type=1400 audit(1514782235.879:102): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.musescore.mscore" pid=1472 comm="apparmor_parser" [ 33.583044] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 34.070016] audit: type=1400 audit(1514782236.372:103): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.paintsupreme-3d.paintsupreme-3d" pid=1480 comm="apparmor_parser" [ 34.482536] audit: type=1400 audit(1514782236.784:104): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.arduino-mhall119.arduino" pid=1489 comm="apparmor_parser" [ 34.488676] audit: type=1400 audit(1514782236.790:105): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.arduino-mhall119.builder" pid=1491 comm="apparmor_parser" [ 37.167054] kauditd_printk_skb: 4 callbacks suppressed [ 37.167055] audit: type=1400 audit(1514782239.469:110): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gedit.gedit" pid=1559 comm="apparmor_parser" [ 37.809516] wlp2s0: authenticate with e4:6f:13:b2:9f:6d [ 37.814495] wlp2s0: send auth to e4:6f:13:b2:9f:6d (try 1/3) [ 37.817009] wlp2s0: authenticated [ 37.824091] wlp2s0: associate with e4:6f:13:b2:9f:6d (try 1/3) [ 37.828612] wlp2s0: RX AssocResp from e4:6f:13:b2:9f:6d (capab=0x411 status=0 aid=2) [ 37.830204] wlp2s0: associated [ 37.830257] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 38.385977] audit: type=1400 audit(1514782240.688:111): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.auryo.auryo" pid=1596 comm="apparmor_parser" [ 38.695434] audit: type=1400 audit(1514782240.997:112): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.brave.brave" pid=1605 comm="apparmor_parser" [ 38.901627] audit: type=1400 audit(1514782241.203:113): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox-snappy.checkbox" pid=1613 comm="apparmor_parser" [ 38.910189] audit: type=1400 audit(1514782241.212:114): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox-snappy.checkbox-cli" pid=1615 comm="apparmor_parser" [ 38.917024] audit: type=1400 audit(1514782241.219:115): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox-snappy.configure" pid=1617 comm="apparmor_parser" [ 38.924408] audit: type=1400 audit(1514782241.226:116): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox-snappy.engineering-tests" pid=1619 comm="apparmor_parser" [ 38.930505] audit: type=1400 audit(1514782241.232:117): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox-snappy.hook.configure" pid=1621 comm="apparmor_parser" [ 38.938219] audit: type=1400 audit(1514782241.240:118): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox-snappy.hw-collection" pid=1623 comm="apparmor_parser" [ 38.945296] audit: type=1400 audit(1514782241.247:119): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.checkbox-snappy.plainbox" pid=1625 comm="apparmor_parser" [ 42.275879] kauditd_printk_skb: 8 callbacks suppressed [ 42.275882] audit: type=1400 audit(1514782244.578:128): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.organize-my-files.organize-my-files" pid=1737 comm="apparmor_parser" [ 42.914876] audit: type=1400 audit(1514782245.217:129): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.atom.apm" pid=1777 comm="apparmor_parser" [ 42.920798] audit: type=1400 audit(1514782245.223:130): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.atom.atom" pid=1779 comm="apparmor_parser" [ 43.473218] audit: type=1400 audit(1514782245.775:131): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.vscode.vscode" pid=1801 comm="apparmor_parser" [ 43.675868] audit: type=1400 audit(1514782245.978:132): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.pycharm-professional.pycharm-professional" pid=1816 comm="apparmor_parser" [ 44.417106] audit: type=1400 audit(1514782246.719:133): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine" pid=1831 comm="apparmor_parser" [ 44.464612] audit: type=1400 audit(1514782246.766:134): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1831 comm="apparmor_parser" [ 44.464864] audit: type=1400 audit(1514782246.767:135): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3604/usr/lib/snapd/snap-confine//snap_update_ns" pid=1831 comm="apparmor_parser" [ 44.499838] audit: type=1400 audit(1514782246.802:136): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=1846 comm="apparmor_parser" [ 44.900681] audit: type=1400 audit(1514782247.203:137): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.kiosceditor.kiosceditor" pid=1880 comm="apparmor_parser" [ 50.324019] kauditd_printk_skb: 14 callbacks suppressed [ 50.324021] audit: type=1400 audit(1514782251.152:152): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.drakon.drakon" pid=4241 comm="apparmor_parser" [ 50.330282] audit: type=1400 audit(1514782251.158:153): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.drakon.tclsh" pid=4243 comm="apparmor_parser" [ 50.451864] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.451947] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.451998] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.452071] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.452174] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.452243] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.452289] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.452337] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.762615] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.762679] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.762720] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.762759] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.762796] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.762834] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.762871] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.762908] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.762946] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.762983] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.763020] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.763057] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.763094] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.763131] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.763168] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.763206] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.763245] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.763293] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [ 50.780761] audit: type=1400 audit(1514782251.608:154): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.inkscape.inkscape" pid=4266 comm="apparmor_parser" [ 50.783646] audit: type=1400 audit(1514782251.611:155): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.inkscape.viewer" pid=4268 comm="apparmor_parser" [ 50.935598] nvidia-modeset: Allocated GPU:0 (GPU-383e2c75-ddd2-a58e-1e1f-3e43fc1ead37) @ PCI:0000:01:00.0 [ 50.935692] nvidia-modeset: Freed GPU:0 (GPU-383e2c75-ddd2-a58e-1e1f-3e43fc1ead37) @ PCI:0000:01:00.0 [ 51.353052] audit: type=1400 audit(1514782252.181:156): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.ktube-media-downloader.ktube-media-downloader" pid=4310 comm="apparmor_parser" [ 51.573862] audit: type=1400 audit(1514782252.401:157): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.vectr.vectr" pid=4334 comm="apparmor_parser" [ 52.024693] audit: type=1400 audit(1514782252.852:158): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.writefull.writefull" pid=4531 comm="apparmor_parser" [ 52.344592] audit: type=1400 audit(1514782253.172:159): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.deepin-music.deepin-music" pid=4773 comm="apparmor_parser" [ 52.882337] audit: type=1400 audit(1514782253.710:160): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.pencilsheep.pencilsheep" pid=5164 comm="apparmor_parser" [ 52.891015] audit: type=1400 audit(1514782253.719:161): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.pencilsheep.run" pid=5166 comm="apparmor_parser" [ 81.267688] nvidia-modeset: Allocated GPU:0 (GPU-383e2c75-ddd2-a58e-1e1f-3e43fc1ead37) @ PCI:0000:01:00.0 [ 81.267814] nvidia-modeset: Freed GPU:0 (GPU-383e2c75-ddd2-a58e-1e1f-3e43fc1ead37) @ PCI:0000:01:00.0 [ 88.648832] Bluetooth: RFCOMM TTY layer initialized [ 88.648838] Bluetooth: RFCOMM socket layer initialized [ 88.648846] Bluetooth: RFCOMM ver 1.11 [ 93.282294] rfkill: input handler disabled [ 219.550514] wlp2s0: AP e4:6f:13:b2:9f:6d changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) [ 1550.372470] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 1550.372482] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1550.372490] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 1550.372494] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 1991.880556] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 1991.880569] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1991.880577] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 1991.880582] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 1997.085449] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 1997.085463] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1997.085471] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 1997.085477] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 2400.321375] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 2400.321389] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 2400.321398] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 2400.321405] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 3364.168797] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 3364.168808] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 3364.168815] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 3364.168819] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 3392.337100] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 3392.337109] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 3392.337112] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 3392.337113] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 3392.337116] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 3392.337120] pcieport 0000:00:1c.0: can't find device of ID00e0 [ 3392.337120] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 3392.337124] pcieport 0000:00:1c.0: can't find device of ID00e0 [ 3392.337125] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 3392.337129] pcieport 0000:00:1c.0: can't find device of ID00e0 [ 3392.337129] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 3392.337133] pcieport 0000:00:1c.0: can't find device of ID00e0 [ 3392.337134] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 3392.337138] pcieport 0000:00:1c.0: can't find device of ID00e0 [ 3392.337139] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 3392.337143] pcieport 0000:00:1c.0: can't find device of ID00e0 [ 3392.337143] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 3392.337147] pcieport 0000:00:1c.0: can't find device of ID00e0 [ 3492.151190] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 3492.151202] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 3492.151209] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 3492.151213] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 4060.417242] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 4060.417254] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 4060.417262] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 4060.417267] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 4149.208737] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 4149.208748] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 4149.208755] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 4149.208759] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 4669.193057] nvidia-modeset: Allocated GPU:0 (GPU-383e2c75-ddd2-a58e-1e1f-3e43fc1ead37) @ PCI:0000:01:00.0 [ 4669.193158] nvidia-modeset: Freed GPU:0 (GPU-383e2c75-ddd2-a58e-1e1f-3e43fc1ead37) @ PCI:0000:01:00.0 [ 4832.291556] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 4832.291566] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 4832.291574] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 4832.291580] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 5003.751254] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 5003.751267] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 5003.751275] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 5003.751280] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 6150.693458] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 6150.693470] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 6150.693477] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 6150.693482] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 6940.938557] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 6940.938569] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 6940.938578] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00002001/00002000 [ 6940.938582] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 7462.665675] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 7462.665688] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 7462.665696] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 7462.665700] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 8020.521846] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 8020.521854] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 8020.521863] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 8020.521867] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 8539.187153] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 8539.187165] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 8539.187174] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000081/00002000 [ 8539.187178] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 8539.187182] pcieport 0000:00:1c.0: [ 7] Bad DLLP [ 9230.536799] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 9230.536811] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 9230.536819] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 9230.536824] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 9684.904647] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 9684.904660] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 9684.904669] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [ 9684.904674] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [10103.449932] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [10103.449945] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [10103.449953] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [10103.449958] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [11076.176944] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [11076.176956] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [11076.176964] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [11076.176969] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [11144.454524] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [11144.454536] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [11144.454545] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [11144.454550] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [11894.896294] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [11894.896302] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [11894.896310] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [11894.896314] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [12058.089134] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [12058.089146] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [12058.089153] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [12058.089157] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [12528.990615] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [12528.990620] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [12528.990624] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [12528.990627] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [15272.344711] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [15272.344719] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [15272.344726] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [15272.344730] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [15326.762652] wlp2s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [15342.241347] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [15365.789174] wlp2s0: authenticate with e4:6f:13:b2:9f:6d [15365.791712] wlp2s0: send auth to e4:6f:13:b2:9f:6d (try 1/3) [15365.899221] wlp2s0: send auth to e4:6f:13:b2:9f:6d (try 2/3) [15366.004288] wlp2s0: send auth to e4:6f:13:b2:9f:6d (try 3/3) [15366.056240] wlp2s0: authenticated [15366.059224] wlp2s0: associate with e4:6f:13:b2:9f:6d (try 1/3) [15366.163276] wlp2s0: associate with e4:6f:13:b2:9f:6d (try 2/3) [15366.267270] wlp2s0: associate with e4:6f:13:b2:9f:6d (try 3/3) [15366.371273] wlp2s0: association with e4:6f:13:b2:9f:6d timed out [15367.858370] wlp2s0: authenticate with e4:6f:13:b2:9f:6d [15367.862400] wlp2s0: send auth to e4:6f:13:b2:9f:6d (try 1/3) [15367.865057] wlp2s0: authenticated [15367.867180] wlp2s0: associate with e4:6f:13:b2:9f:6d (try 1/3) [15367.971282] wlp2s0: associate with e4:6f:13:b2:9f:6d (try 2/3) [15368.075294] wlp2s0: associate with e4:6f:13:b2:9f:6d (try 3/3) [15368.179225] wlp2s0: association with e4:6f:13:b2:9f:6d timed out [15370.156042] wlp2s0: authenticate with e4:6f:13:b2:9f:6d [15370.160031] wlp2s0: send auth to e4:6f:13:b2:9f:6d (try 1/3) [15370.163728] wlp2s0: authenticated [15370.167242] wlp2s0: associate with e4:6f:13:b2:9f:6d (try 1/3) [15370.171652] wlp2s0: RX AssocResp from e4:6f:13:b2:9f:6d (capab=0x411 status=0 aid=2) [15370.173208] wlp2s0: associated [15370.173261] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [15419.471447] wlp2s0: AP e4:6f:13:b2:9f:6d changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz) [15446.057141] wlp2s0: deauthenticating from e4:6f:13:b2:9f:6d by local choice (Reason: 3=DEAUTH_LEAVING) [15446.063950] wlp2s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [15451.298472] wlp2s0: authenticate with 4a:88:ca:03:ef:2f [15451.300152] wlp2s0: send auth to 4a:88:ca:03:ef:2f (try 1/3) [15451.303653] wlp2s0: authenticated [15451.308308] wlp2s0: associate with 4a:88:ca:03:ef:2f (try 1/3) [15451.332766] wlp2s0: RX AssocResp from 4a:88:ca:03:ef:2f (capab=0x431 status=0 aid=1) [15451.334504] wlp2s0: associated [15648.637378] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [15648.637400] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [15648.637408] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [15648.637413] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [15648.637419] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [15648.637426] pcieport 0000:00:1c.0: can't find device of ID00e0 [15648.637428] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [15648.637435] pcieport 0000:00:1c.0: can't find device of ID00e0 [15752.125557] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [15752.125568] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [15752.125576] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [15752.125580] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [17934.561559] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [17934.561568] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [17934.561576] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [17934.561580] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [17969.465900] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [17969.465909] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [17969.465917] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [17969.465922] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [18497.223954] wlp2s0: deauthenticating from 4a:88:ca:03:ef:2f by local choice (Reason: 3=DEAUTH_LEAVING) [18497.228726] wlp2s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [18497.228769] wlp2s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22) [18498.022432] wlp2s0: authenticate with e4:6f:13:b2:9f:6d [18498.026541] wlp2s0: send auth to e4:6f:13:b2:9f:6d (try 1/3) [18498.029033] wlp2s0: authenticated [18498.029701] wlp2s0: associate with e4:6f:13:b2:9f:6d (try 1/3) [18498.034197] wlp2s0: RX AssocResp from e4:6f:13:b2:9f:6d (capab=0x411 status=0 aid=5) [18498.035653] wlp2s0: associated [18679.445283] wlp2s0: AP e4:6f:13:b2:9f:6d changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) [19046.905582] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [19046.905593] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [19046.905600] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [19046.905604] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [19080.278977] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [19080.278987] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [19080.278993] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [19080.278996] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [19310.830923] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [19310.830930] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [19310.830936] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [19310.830940] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [20688.018815] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [20688.018828] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [20688.018836] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [20688.018841] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [22189.042034] [Firmware Bug]: battery: (dis)charge rate invalid. [23294.510452] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [23294.510466] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [23294.510475] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [23294.510480] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [23440.557235] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [23440.557245] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [23440.557254] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [23440.557260] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [23536.697060] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [23536.697073] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [23536.697082] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [23536.697088] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [23821.442287] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [23821.442299] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [23821.442310] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [23821.442317] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [25315.283626] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [25315.283639] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [25315.283647] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [25315.283652] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [25448.096805] perf: interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [27975.050231] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [27975.050234] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [27975.050237] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [27975.050238] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [28286.126961] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [28286.126974] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [28286.126982] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [28286.126987] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [30884.660342] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [30884.660354] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [30884.660361] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [30884.660365] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [32304.100791] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [32304.100800] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [32304.100809] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [32304.100815] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [32543.531820] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [32543.531833] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [32543.531842] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [32543.531847] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [32754.794451] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [32754.794464] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [32754.794473] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [32754.794478] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [32839.299466] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [32839.299478] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [32839.299487] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [32839.299492] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [32939.113380] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [32939.113391] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [32939.113402] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [32939.113409] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [33154.050091] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [33154.050104] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [33154.050113] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [33154.050119] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [33159.255106] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [33159.255115] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [33159.255124] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [33159.255129] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [35415.908361] wlp2s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [35431.594740] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [35854.844741] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [35854.844749] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [35854.844757] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [35854.844761] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [36484.652627] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [36484.652641] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [36484.652650] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [36484.652655] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [36586.303675] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [36586.303687] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [36586.303695] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [36586.303700] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [36767.464259] perf: interrupt took too long (3162 > 3143), lowering kernel.perf_event_max_sample_rate to 63250 [37481.567538] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [37481.567546] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [37481.567552] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [37481.567556] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [37915.080637] wlp2s0: authenticate with e4:6f:13:b2:9f:6d [37915.084317] wlp2s0: send auth to e4:6f:13:b2:9f:6d (try 1/3) [37915.086942] wlp2s0: authenticated [37915.094410] wlp2s0: associate with e4:6f:13:b2:9f:6d (try 1/3) [37915.098846] wlp2s0: RX AssocResp from e4:6f:13:b2:9f:6d (capab=0x411 status=0 aid=1) [37915.100409] wlp2s0: associated [37915.100489] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [38338.253078] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [38338.253091] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [38338.253101] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [38338.253106] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [38654.840797] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [38654.840812] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [38654.840820] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00000001/00002000 [38654.840827] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [38654.840834] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [38654.840842] pcieport 0000:00:1c.0: can't find device of ID00e0 [38654.840846] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [38654.840853] pcieport 0000:00:1c.0: can't find device of ID00e0 [39176.759824] wlp2s0: AP e4:6f:13:b2:9f:6d changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz) [39771.214694] kauditd_printk_skb: 1 callbacks suppressed [39771.214697] audit: type=1400 audit(1514821971.440:163): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=14908 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [39801.121363] audit: type=1400 audit(1514822001.345:164): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=14934 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0