[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-31-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50-Ubuntu SMP Fri Sep 7 16:16:45 UTC 2012 (Ubuntu 3.2.0-31.50-generic 3.2.28)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic root=UUID=700971af-be61-43c6-9815-22467cacbfcf ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006ffb0000 (usable)
[    0.000000]  BIOS-e820: 000000006ffb0000 - 000000006ffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000006ffc0000 - 000000006fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006fff0000 - 0000000070000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.3 present.
[    0.000000] DMI:          939Dual-SATA2/939Dual-SATA2, BIOS P1.60 01/27/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] AGP bridge at 00:04:00
[    0.000000] Aperture from AGP @ dc000000 old size 32 MB
[    0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[    0.000000] Aperture from AGP @ dc000000 size 32 MB (APSIZE 0)
[    0.000000] last_pfn = 0x6ffb0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 base 0060000000 mask FFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000006ffb0000
[    0.000000]  0000000000 - 006fe00000 page 2M
[    0.000000]  006fe00000 - 006ffb0000 page 4k
[    0.000000] kernel direct mapping tables up to 6ffb0000 @ 1fffc000-20000000
[    0.000000] RAMDISK: 364d8000 - 37264000
[    0.000000] ACPI: RSDP 00000000000f9be0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 000000006ffb0000 00030 (v01 A M I  OEMRSDT  01000627 MSFT 00000097)
[    0.000000] ACPI: FACP 000000006ffb0200 00084 (v02 A M I  OEMFACP  01000627 MSFT 00000097)
[    0.000000] ACPI: DSDT 000000006ffb0400 045A7 (v01  939M2 939M2160 00000160 INTL 02002026)
[    0.000000] ACPI: FACS 000000006ffc0000 00040
[    0.000000] ACPI: APIC 000000006ffb0390 00068 (v01 A M I  OEMAPIC  01000627 MSFT 00000097)
[    0.000000] ACPI: OEMB 000000006ffc0040 00056 (v01 A M I  AMI_OEM  01000627 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000006ffb0000
[    0.000000] Initmem setup node 0 0000000000000000-000000006ffb0000
[    0.000000]   NODE_DATA [000000006ffab000 - 000000006ffaffff]
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006da00000-ffff88006f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0006ffb0
[    0.000000] On node 0 totalpages: 458559
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3914 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7103 pages used for memmap
[    0.000000]   DMA32 zone: 447473 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 2, version 17, address 0xfec10000, GSI 24-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 56
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[    0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8f7c0000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88006fc00000 s83136 r8192 d23360 u1048576
[    0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 451387
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic root=UUID=700971af-be61-43c6-9815-22467cacbfcf ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] AGP bridge at 00:04:00
[    0.000000] Aperture from AGP @ dc000000 old size 32 MB
[    0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[    0.000000] Aperture from AGP @ dc000000 size 32 MB (APSIZE 0)
[    0.000000] Node 0: aperture @ dc000000 size 64 MB
[    0.000000] Memory: 1775640k/1834688k available (6558k kernel code, 452k absent, 58596k reserved, 6642k data, 920k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 14680064 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2200.085 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.008009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.17 BogoMIPS (lpj=8800340)
[    0.008014] pid_max: default: 32768 minimum: 301
[    0.008051] Security Framework initialized
[    0.008080] AppArmor: AppArmor initialized
[    0.008082] Yama: becoming mindful.
[    0.008393] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.012853] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.014372] Mount-cache hash table entries: 256
[    0.014631] Initializing cgroup subsys cpuacct
[    0.014639] Initializing cgroup subsys memory
[    0.014656] Initializing cgroup subsys devices
[    0.014659] Initializing cgroup subsys freezer
[    0.014662] Initializing cgroup subsys blkio
[    0.014676] Initializing cgroup subsys perf_event
[    0.014724] tseg: 0000000000
[    0.014746] mce: CPU supports 5 MCE banks
[    0.014801] SMP alternatives: switching to UP code
[    0.023066] ACPI: Core revision 20110623
[    0.025595] ftrace: allocating 27008 entries in 106 pages
[    0.029111] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071712] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[    0.072003] Performance Events: AMD PMU driver.
[    0.072003] ... version:                0
[    0.072003] ... bit width:              48
[    0.072003] ... generic registers:      4
[    0.072003] ... value mask:             0000ffffffffffff
[    0.072003] ... max period:             00007fffffffffff
[    0.072003] ... fixed-purpose events:   0
[    0.072003] ... event mask:             000000000000000f
[    0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.072003] Brought up 1 CPUs
[    0.072003] Total of 1 processors activated (4400.17 BogoMIPS).
[    0.072003] devtmpfs: initialized
[    0.072003] EVM: security.selinux
[    0.072003] EVM: security.SMACK64
[    0.072003] EVM: security.capability
[    0.072003] PM: Registering ACPI NVS region at 6ffc0000 (196608 bytes)
[    0.072003] print_constraints: dummy: 
[    0.072038] RTC time: 19:51:34, date: 10/13/12
[    0.072097] NET: Registered protocol family 16
[    0.072249] node 0 link 0: io port [1000, ffffff]
[    0.072252] TOM: 0000000070000000 aka 1792M
[    0.072255] node 0 link 0: mmio [e0000000, efffffff]
[    0.072259] node 0 link 0: mmio [a0000, bffff]
[    0.072262] node 0 link 0: mmio [70000000, ffffffff]
[    0.072265] bus: [00, ff] on node 0 link 0
[    0.072268] bus: 00 index 0 [io  0x0000-0xffff]
[    0.072270] bus: 00 index 1 [mem 0x70000000-0xfcffffffff]
[    0.072272] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[    0.072285] ACPI: bus type pci registered
[    0.072355] PCI: Using configuration type 1 for base access
[    0.073583] bio: create slab <bio-0> at 0
[    0.073712] ACPI: Added _OSI(Module Device)
[    0.073715] ACPI: Added _OSI(Processor Device)
[    0.073717] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.073719] ACPI: Added _OSI(Processor Aggregator Device)
[    0.074322] ACPI: EC: Look up EC in DSDT
[    0.075330] ACPI: Executed 1 blocks of module-level executable AML code
[    0.077151] ACPI: Interpreter enabled
[    0.077155] ACPI: (supports S0 S1 S4 S5)
[    0.077174] ACPI: Using IOAPIC for interrupt routing
[    0.082942] ACPI: No dock devices found.
[    0.082946] HEST: Table not found.
[    0.082951] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.083033] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.083184] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.083187] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.083190] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.083192] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.083195] pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xffffffff] (ignored)
[    0.083211] pci 0000:00:00.0: [10b9:1695] type 0 class 0x000600
[    0.083280] pci 0000:00:01.0: [10b9:524b] type 1 class 0x000604
[    0.083319] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.083323] pci 0000:00:01.0: PME# disabled
[    0.083344] pci 0000:00:02.0: [10b9:524c] type 1 class 0x000604
[    0.083382] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.083385] pci 0000:00:02.0: PME# disabled
[    0.083410] pci 0000:00:04.0: [10b9:1689] type 0 class 0x000600
[    0.083418] pci 0000:00:04.0: reg 10: [mem 0xdc000000-0xdfffffff pref]
[    0.083499] pci 0000:00:05.0: [10b9:5246] type 1 class 0x000604
[    0.083540] pci 0000:00:06.0: [10b9:5249] type 1 class 0x000604
[    0.083581] pci 0000:00:07.0: [10b9:1563] type 0 class 0x000601
[    0.083652] pci 0000:00:07.1: [10b9:7101] type 0 class 0x000680
[    0.083710] pci 0000:00:07.1: quirk: [io  0x0800-0x083f] claimed by ali7101 ACPI
[    0.083739] pci 0000:00:08.0: [10b9:5455] type 0 class 0x000401
[    0.083754] pci 0000:00:08.0: reg 10: [io  0xe800-0xe8ff]
[    0.083763] pci 0000:00:08.0: reg 14: [mem 0xff6ff000-0xff6fffff]
[    0.083819] pci 0000:00:08.0: supports D1 D2
[    0.083821] pci 0000:00:08.0: PME# supported from D2 D3hot D3cold
[    0.083825] pci 0000:00:08.0: PME# disabled
[    0.083852] pci 0000:00:11.0: [10b9:5263] type 0 class 0x000200
[    0.083863] pci 0000:00:11.0: reg 10: [io  0xe400-0xe4ff]
[    0.083870] pci 0000:00:11.0: reg 14: [mem 0xff6fec00-0xff6fecff]
[    0.083911] pci 0000:00:11.0: PME# supported from D3hot D3cold
[    0.083915] pci 0000:00:11.0: PME# disabled
[    0.083930] pci 0000:00:12.0: [10b9:5229] type 0 class 0x000101
[    0.083939] pci 0000:00:12.0: reg 10: [io  0x01f0-0x01ff]
[    0.083947] pci 0000:00:12.0: reg 14: [io  0x03f4-0x03f7]
[    0.083954] pci 0000:00:12.0: reg 18: [io  0x0170-0x017f]
[    0.083961] pci 0000:00:12.0: reg 1c: [io  0x0374-0x0377]
[    0.083968] pci 0000:00:12.0: reg 20: [io  0xff00-0xff0f]
[    0.083997] pci 0000:00:13.0: [10b9:5237] type 0 class 0x000c03
[    0.084026] pci 0000:00:13.0: reg 10: [mem 0xff6fd000-0xff6fdfff]
[    0.084073] pci 0000:00:13.1: [10b9:5237] type 0 class 0x000c03
[    0.084083] pci 0000:00:13.1: reg 10: [mem 0xff6fc000-0xff6fcfff]
[    0.084130] pci 0000:00:13.2: [10b9:5237] type 0 class 0x000c03
[    0.084139] pci 0000:00:13.2: reg 10: [mem 0xff6fb000-0xff6fbfff]
[    0.084189] pci 0000:00:13.3: [10b9:5239] type 0 class 0x000c03
[    0.084201] pci 0000:00:13.3: reg 10: [mem 0xff6fe800-0xff6fe8ff]
[    0.084252] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[    0.084256] pci 0000:00:13.3: PME# disabled
[    0.084281] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.084305] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.084326] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.084346] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.084367] PCI: peer root bus 00 res updated from pci conf
[    0.084412] pci 0000:01:00.0: [1002:7183] type 0 class 0x000300
[    0.084425] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.084436] pci 0000:01:00.0: reg 18: [mem 0xff2f0000-0xff2fffff 64bit]
[    0.084444] pci 0000:01:00.0: reg 20: [io  0xc000-0xc0ff]
[    0.084457] pci 0000:01:00.0: reg 30: [mem 0xff2c0000-0xff2dffff pref]
[    0.084487] pci 0000:01:00.0: supports D1 D2
[    0.084510] pci 0000:01:00.1: [1002:71a3] type 0 class 0x000380
[    0.084522] pci 0000:01:00.1: reg 10: [mem 0xff2e0000-0xff2effff 64bit]
[    0.084573] pci 0000:01:00.1: supports D1 D2
[    0.084586] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.084596] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.084599] pci 0000:00:01.0:   bridge window [io  0xa000-0xcfff]
[    0.084603] pci 0000:00:01.0:   bridge window [mem 0xff200000-0xff2fffff]
[    0.084606] pci 0000:00:01.0:   bridge window [mem 0xb7f00000-0xd7efffff pref]
[    0.084633] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.084637] pci 0000:00:02.0:   bridge window [mem 0xff300000-0xff3fffff]
[    0.084678] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[    0.084684] pci 0000:00:05.0:   bridge window [mem 0xff400000-0xff4fffff]
[    0.084718] pci 0000:04:06.0: [10ec:8139] type 0 class 0x000200
[    0.084733] pci 0000:04:06.0: reg 10: [io  0xd800-0xd8ff]
[    0.084743] pci 0000:04:06.0: reg 14: [mem 0xff5ffc00-0xff5ffcff]
[    0.084779] pci 0000:04:06.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.084803] pci 0000:04:06.0: supports D1 D2
[    0.084805] pci 0000:04:06.0: PME# supported from D1 D2 D3hot
[    0.084809] pci 0000:04:06.0: PME# disabled
[    0.084841] pci 0000:00:06.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.084846] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
[    0.084850] pci 0000:00:06.0:   bridge window [mem 0xff500000-0xff5fffff]
[    0.084855] pci 0000:00:06.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.084857] pci 0000:00:06.0:   bridge window [mem 0x70000000-0xfcffffffff] (subtractive decode)
[    0.084860] pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.084877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.084941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.084965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
[    0.085058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
[    0.085092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
[    0.085131]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.091532] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
[    0.091622] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.091708] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.091790] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
[    0.091884] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.091969] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.092064] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.092150] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[    0.092237] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.092423] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.092426] vgaarb: loaded
[    0.092427] vgaarb: bridge control possible 0000:01:00.0
[    0.092560] i2c-core: driver [aat2870] using legacy suspend method
[    0.092561] i2c-core: driver [aat2870] using legacy resume method
[    0.092676] SCSI subsystem initialized
[    0.092786] libata version 3.00 loaded.
[    0.092851] usbcore: registered new interface driver usbfs
[    0.092868] usbcore: registered new interface driver hub
[    0.092905] usbcore: registered new device driver usb
[    0.093027] PCI: Using ACPI for IRQ routing
[    0.093031] PCI: pci_cache_line_size set to 64 bytes
[    0.093050] pci 0000:00:04.0: address space collision: [mem 0xdc000000-0xdfffffff pref] conflicts with GART [mem 0xdc000000-0xdfffffff]
[    0.093116] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.093119] reserve RAM buffer: 000000006ffb0000 - 000000006fffffff 
[    0.093256] NetLabel: Initializing
[    0.093258] NetLabel:  domain hash size = 128
[    0.093260] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.093275] NetLabel:  unlabeled traffic allowed by default
[    0.106098] AppArmor: AppArmor Filesystem Enabled
[    0.106161] pnp: PnP ACPI init
[    0.106186] ACPI: bus type pnp registered
[    0.106337] pnp 00:00: [bus 00-ff]
[    0.106339] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.106342] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.106344] pnp 00:00: [io  0x0d00-0xffff window]
[    0.106347] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.106350] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.106352] pnp 00:00: [mem 0x70000000-0xffffffff window]
[    0.106451] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.106473] pnp 00:01: [dma 4]
[    0.106476] pnp 00:01: [io  0x0000-0x000f]
[    0.106478] pnp 00:01: [io  0x0081-0x0083]
[    0.106480] pnp 00:01: [io  0x0087]
[    0.106482] pnp 00:01: [io  0x0089-0x008b]
[    0.106484] pnp 00:01: [io  0x008f]
[    0.106486] pnp 00:01: [io  0x00c0-0x00df]
[    0.106514] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.106525] pnp 00:02: [io  0x0070-0x0071]
[    0.106544] pnp 00:02: [irq 8]
[    0.106567] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.106580] pnp 00:03: [io  0x0061]
[    0.106606] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.106616] pnp 00:04: [io  0x00f0-0x00ff]
[    0.106621] pnp 00:04: [irq 13]
[    0.106648] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.107029] pnp 00:05: [io  0x03f0-0x03f5]
[    0.107031] pnp 00:05: [io  0x03f7]
[    0.107036] pnp 00:05: [irq 6]
[    0.107039] pnp 00:05: [dma 2]
[    0.107103] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.107429] pnp 00:06: [io  0x0378-0x037f]
[    0.107431] pnp 00:06: [io  0x0778-0x077f]
[    0.107436] pnp 00:06: [irq 7]
[    0.107438] pnp 00:06: [dma 3]
[    0.107574] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.107761] pnp 00:07: [io  0x0200-0x0207]
[    0.107796] pnp 00:07: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.107967] pnp 00:08: [io  0x0010-0x001f]
[    0.107969] pnp 00:08: [io  0x0022-0x003f]
[    0.107971] pnp 00:08: [io  0x0044-0x005f]
[    0.107973] pnp 00:08: [io  0x0062-0x0063]
[    0.107976] pnp 00:08: [io  0x0065-0x006f]
[    0.108017] pnp 00:08: [io  0x0072-0x007f]
[    0.108020] pnp 00:08: [io  0x0080]
[    0.108022] pnp 00:08: [io  0x0084-0x0086]
[    0.108024] pnp 00:08: [io  0x0088]
[    0.108026] pnp 00:08: [io  0x008c-0x008e]
[    0.108028] pnp 00:08: [io  0x0090-0x009f]
[    0.108030] pnp 00:08: [io  0x00a2-0x00bf]
[    0.108032] pnp 00:08: [io  0x00e0-0x00ef]
[    0.108034] pnp 00:08: [io  0x0480-0x048f]
[    0.108036] pnp 00:08: [io  0x04d0-0x04d1]
[    0.108039] pnp 00:08: [io  0x0800-0x087f]
[    0.108041] pnp 00:08: [io  0x0400-0x040f]
[    0.108128] system 00:08: [io  0x0480-0x048f] has been reserved
[    0.108131] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.108134] system 00:08: [io  0x0800-0x087f] could not be reserved
[    0.108137] system 00:08: [io  0x0400-0x040f] has been reserved
[    0.108141] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.108188] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[    0.108197] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[    0.108199] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    0.108202] pnp 00:09: [mem 0xfec10000-0xfec10fff]
[    0.108204] pnp 00:09: [mem 0xffb80000-0xffffffff]
[    0.108251] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.108254] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.108257] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.108260] system 00:09: [mem 0xfec10000-0xfec10fff] could not be reserved
[    0.108263] system 00:09: [mem 0xffb80000-0xffffffff] has been reserved
[    0.108267] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.108295] pnp 00:0a: [io  0x0060]
[    0.108297] pnp 00:0a: [io  0x0064]
[    0.108302] pnp 00:0a: [irq 1]
[    0.108339] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.108383] pnp 00:0b: [irq 12]
[    0.108421] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.108642] pnp 00:0c: [io  0x03f8-0x03ff]
[    0.108648] pnp 00:0c: [irq 4]
[    0.108650] pnp 00:0c: [dma 0 disabled]
[    0.108722] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.108780] pnp 00:0d: [io  0x0000-0xffffffffffffffff disabled]
[    0.108783] pnp 00:0d: [io  0x0290-0x029f]
[    0.108829] system 00:0d: [io  0x0290-0x029f] has been reserved
[    0.108832] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.109000] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    0.109003] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[    0.109005] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[    0.109007] pnp 00:0e: [mem 0x00100000-0x6fffffff]
[    0.109010] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.109017] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[    0.109021] pnp 00:0e: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[    0.109026] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[    0.109030] pnp 00:0e: disabling [mem 0x00100000-0x6fffffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[    0.109084] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.109225] pnp: PnP ACPI: found 15 devices
[    0.109227] ACPI: ACPI bus type pnp unregistered
[    0.115823] Switching to clocksource acpi_pm
[    0.115867] pci 0000:04:06.0: address space collision: [mem 0xffff0000-0xffffffff pref] conflicts with reserved [mem 0xff7c0000-0xffffffff]
[    0.115875] PCI: max bus depth: 1 pci_try_num: 2
[    0.115908] pci 0000:00:06.0: BAR 15: assigned [mem 0x70000000-0x700fffff pref]
[    0.115914] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.115917] pci 0000:00:01.0:   bridge window [io  0xa000-0xcfff]
[    0.115921] pci 0000:00:01.0:   bridge window [mem 0xff200000-0xff2fffff]
[    0.115925] pci 0000:00:01.0:   bridge window [mem 0xb7f00000-0xd7efffff pref]
[    0.115929] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.115933] pci 0000:00:02.0:   bridge window [mem 0xff300000-0xff3fffff]
[    0.115938] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[    0.115943] pci 0000:00:05.0:   bridge window [mem 0xff400000-0xff4fffff]
[    0.115952] pci 0000:04:06.0: BAR 6: assigned [mem 0x70000000-0x7000ffff pref]
[    0.115955] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[    0.115959] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
[    0.115964] pci 0000:00:06.0:   bridge window [mem 0xff500000-0xff5fffff]
[    0.115968] pci 0000:00:06.0:   bridge window [mem 0x70000000-0x700fffff pref]
[    0.115968] pci 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
[    0.115968] pci 0000:00:01.0: setting latency timer to 64
[    0.115968] pci 0000:00:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
[    0.115968] pci 0000:00:02.0: setting latency timer to 64
[    0.115968] pci 0000:00:05.0: setting latency timer to 64
[    0.115968] pci 0000:00:06.0: setting latency timer to 64
[    0.115968] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.115968] pci_bus 0000:00: resource 5 [mem 0x70000000-0xfcffffffff]
[    0.115968] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.115968] pci_bus 0000:01: resource 0 [io  0xa000-0xcfff]
[    0.115968] pci_bus 0000:01: resource 1 [mem 0xff200000-0xff2fffff]
[    0.115968] pci_bus 0000:01: resource 2 [mem 0xb7f00000-0xd7efffff pref]
[    0.115968] pci_bus 0000:02: resource 1 [mem 0xff300000-0xff3fffff]
[    0.115968] pci_bus 0000:03: resource 1 [mem 0xff400000-0xff4fffff]
[    0.115968] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.115968] pci_bus 0000:04: resource 1 [mem 0xff500000-0xff5fffff]
[    0.115968] pci_bus 0000:04: resource 2 [mem 0x70000000-0x700fffff pref]
[    0.115968] pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
[    0.115968] pci_bus 0000:04: resource 5 [mem 0x70000000-0xfcffffffff]
[    0.115968] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.115968] NET: Registered protocol family 2
[    0.115968] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.115968] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.119869] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.121402] TCP: Hash tables configured (established 262144 bind 65536)
[    0.121406] TCP reno registered
[    0.121424] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.121474] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.121703] NET: Registered protocol family 1
[    0.121737] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.121762] pci 0000:00:01.0: Enabling HT MSI Mapping
[    0.121782] pci 0000:00:02.0: Enabling HT MSI Mapping
[    0.121822] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.121858] pci 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.121889] pci 0000:00:13.0: PCI INT A disabled
[    0.121901] pci 0000:00:13.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.121910] pci 0000:00:13.1: PCI INT B disabled
[    0.121922] pci 0000:00:13.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.121931] pci 0000:00:13.2: PCI INT C disabled
[    0.121946] pci 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.121957] pci 0000:00:13.3: PCI INT D disabled
[    0.121972] pci 0000:01:00.0: Boot video device
[    0.122346] Trying to unpack rootfs image as initramfs...
[    0.128165] agpgart-amd64 0000:00:04.0: AGP bridge [10b9/1689]
[    0.128176] agpgart-amd64 0000:00:04.0: aperture size 4096 MB is not right, using settings from NB
[    0.128185] agpgart-amd64 0000:00:04.0: setting up ULi AGP
[    0.136200] agpgart-amd64 0000:00:04.0: AGP aperture is 64M @ 0xdc000000
[    0.136745] audit: initializing netlink socket (disabled)
[    0.136762] type=2000 audit(1350157894.136:1): initialized
[    0.184793] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.190898] VFS: Disk quotas dquot_6.5.2
[    0.190994] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.196261] fuse init (API version 7.17)
[    0.196446] msgmni has been set to 3468
[    0.208462] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.208550] io scheduler noop registered
[    0.208552] io scheduler deadline registered
[    0.208595] io scheduler cfq registered (default)
[    0.212571] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.212612] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.212811] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.212820] ACPI: Power Button [PWRB]
[    0.212881] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.212885] ACPI: Power Button [PWRF]
[    0.214917] ERST: Table is not found!
[    0.214919] GHES: HEST is not enabled!
[    0.215057] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.235516] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.285188] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.300511] Linux agpgart interface v0.103
[    0.309256] brd: module loaded
[    0.310164] loop: module loaded
[    0.310664] pata_acpi 0000:00:12.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.310760] pata_acpi 0000:00:12.0: PCI INT A disabled
[    0.311206] Fixed MDIO Bus: probed
[    0.311227] tun: Universal TUN/TAP device driver, 1.6
[    0.311229] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.311299] PPP generic driver version 2.4.2
[    0.311421] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.311469] ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.311494] ehci_hcd 0000:00:13.3: EHCI Host Controller
[    0.311544] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 1
[    0.311580] ehci_hcd 0000:00:13.3: debug port 1
[    0.332222] ehci_hcd 0000:00:13.3: irq 23, io mem 0xff6fe800
[    0.344191] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00
[    0.344464] hub 1-0:1.0: USB hub found
[    0.344470] hub 1-0:1.0: 8 ports detected
[    0.344645] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.348168] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.348214] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.348332] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    0.348386] ohci_hcd 0000:00:13.0: irq 20, io mem 0xff6fd000
[    0.406497] hub 2-0:1.0: USB hub found
[    0.406506] hub 2-0:1.0: 3 ports detected
[    0.412163] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.412205] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    0.412330] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    0.412386] ohci_hcd 0000:00:13.1: irq 21, io mem 0xff6fc000
[    0.470391] hub 3-0:1.0: USB hub found
[    0.470407] hub 3-0:1.0: 3 ports detected
[    0.476090] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.476131] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    0.476250] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[    0.476311] ohci_hcd 0000:00:13.2: irq 22, io mem 0xff6fb000
[    0.534360] hub 4-0:1.0: USB hub found
[    0.534369] hub 4-0:1.0: 3 ports detected
[    0.534505] uhci_hcd: USB Universal Host Controller Interface driver
[    0.534599] usbcore: registered new interface driver libusual
[    0.534655] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.536832] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.536841] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.537011] mousedev: PS/2 mouse device common for all mice
[    0.537165] rtc_cmos 00:02: RTC can wake from S4
[    0.537280] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.537313] rtc0: alarms up to one month, 114 bytes nvram
[    0.537439] device-mapper: uevent: version 1.0.3
[    0.537525] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.537538] cpuidle: using governor ladder
[    0.537540] cpuidle: using governor menu
[    0.537541] EFI Variables Facility v0.08 2004-May-17
[    0.537819] TCP cubic registered
[    0.537988] NET: Registered protocol family 10
[    0.538583] NET: Registered protocol family 17
[    0.538588] Registering the dns_resolver key type
[    0.540928] PM: Hibernation image not present or could not be loaded.
[    0.540952] registered taskstats version 1
[    0.560798] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.564985] Freeing initrd memory: 13872k freed
[    0.591192]   Magic number: 0:357:900
[    0.591299] acpi PNP0501:00: hash matches
[    0.591341] rtc_cmos 00:02: setting system clock to 2012-10-13 19:51:34 UTC (1350157894)
[    0.591346] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ (1 cpu cores) (version 2.20.00)
[    0.591411] powernow-k8: fid 0xe (2200 MHz), vid 0x6
[    0.591413] powernow-k8: fid 0xc (2000 MHz), vid 0x8
[    0.591415] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[    0.591417] powernow-k8: fid 0x2 (1000 MHz), vid 0xa
[    0.591482] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.591484] EDD information not available.
[    0.593564] Freeing unused kernel memory: 920k freed
[    0.594476] Write protecting the kernel read-only data: 12288k
[    0.600853] Freeing unused kernel memory: 1616k freed
[    0.607779] Freeing unused kernel memory: 1200k freed
[    0.639352] udevd[90]: starting version 175
[    0.656149] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[    0.798225] Floppy drive(s): fd0 is 1.44M
[    0.829620] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    0.831571] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[    0.839934] FDC 0 is a post-1991 82077
[    0.852178] uli526x 0000:00:11.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.873741] 8139cp 0000:04:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    0.874482] 8139too: 8139too Fast Ethernet driver 0.9.28
[    0.882217] 8139too 0000:04:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.883170] 8139too 0000:04:06.0: eth0: RealTek RTL8139 at 0xd800, 4c:00:10:50:b9:fa, IRQ 21
[    0.895306] uli526x 0000:00:11.0: eth1: ULi M5263 at pci0000:00:11.0, 00:13:8f:93:6b:51, irq 17
[    0.898704] pata_ali 0000:00:12.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.901890] scsi0 : pata_ali
[    0.903143] scsi1 : pata_ali
[    0.904880] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    0.904884] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.076303] ata1.00: ATAPI: PLEXTOR DVDR   PX-755A, 1.01, max UDMA/66
[    1.076309] ata1.00: WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled
[    1.076311] ata1.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[    1.104045] ata1.01: ATA-7: ST3120814A, 3.AAD, max UDMA/100
[    1.104048] ata1.01: 234441648 sectors, multi 16: LBA48 
[    1.112180] ata1.00: configured for UDMA/66
[    1.179018] ata1.01: configured for UDMA/100
[    1.179911] scsi 0:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-755A   1.01 PQ: 0 ANSI: 5
[    1.181118] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    1.181122] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.181271] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.181338] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.181477] scsi 0:0:1:0: Direct-Access     ATA      ST3120814A       3.AA PQ: 0 ANSI: 5
[    1.181674] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.181861] sd 0:0:1:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.181914] sd 0:0:1:0: [sda] Write Protect is off
[    1.181917] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.181941] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.255467]  sda: sda1 sda2 < sda5 >
[    1.255842] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.520477] ata2.00: ATA-6: ST380011A, 8.01, max UDMA/100
[    1.520480] ata2.00: 156301488 sectors, multi 16: LBA48 
[    1.520829] ata2.01: ATA-5: QUANTUM FIREBALLlct20 20, APL.0900, max UDMA/100
[    1.520831] ata2.01: 39876480 sectors, multi 8: LBA 
[    1.536338] ata2.00: configured for UDMA/100
[    1.552505] ata2.01: configured for UDMA/100
[    1.552625] scsi 1:0:0:0: Direct-Access     ATA      ST380011A        8.01 PQ: 0 ANSI: 5
[    1.552822] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    1.552920] scsi 1:0:1:0: Direct-Access     ATA      QUANTUM FIREBALL APL. PQ: 0 ANSI: 5
[    1.553070] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.553101] sd 1:0:1:0: Attached scsi generic sg3 type 0
[    1.553161] sd 1:0:0:0: [sdb] Write Protect is off
[    1.553164] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.553215] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.553285] sd 1:0:1:0: [sdc] 39876480 512-byte logical blocks: (20.4 GB/19.0 GiB)
[    1.553332] sd 1:0:1:0: [sdc] Write Protect is off
[    1.553334] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[    1.553407] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.221944] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    2.221948] ata2.00: BMDMA stat 0x64
[    2.221953] ata2.00: failed command: READ DMA
[    2.221959] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[    2.221960]          res 51/84:01:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[    2.221963] ata2.00: status: { DRDY ERR }
[    2.221965] ata2.00: error: { ICRC ABRT }
[    2.221994] ata2: soft resetting link
[    2.624326] ata2.00: configured for UDMA/100
[    2.640490] ata2.01: configured for UDMA/100
[    2.640500] ata2: EH complete
[    3.288305] ata2.00: limiting speed to UDMA/66:PIO4
[    3.288308] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    3.288310] ata2.00: BMDMA stat 0x64
[    3.288313] ata2.00: failed command: READ DMA
[    3.288319] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[    3.288320]          res 51/84:01:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[    3.288323] ata2.00: status: { DRDY ERR }
[    3.288325] ata2.00: error: { ICRC ABRT }
[    3.288344] ata2: soft resetting link
[    3.660350] ata2.00: configured for UDMA/66
[    3.676489] ata2.01: configured for UDMA/100
[    3.676494] ata2: EH complete
[    3.696353]  sdb: sdb1 sdb2
[    3.708455] sdb: detected capacity change from 0 to 80026361856
[    3.708570]  sdc: sdc1
[    3.708837] sdb: detected capacity change from 0 to 80026361856
[    3.708963] sdc: detected capacity change from 0 to 20416757760
[    3.709037] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.709094] sd 1:0:1:0: [sdc] Attached SCSI disk
[    4.208717] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.288566] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    4.288570] ata2.01: BMDMA stat 0x64
[    4.288575] ata2.01: failed command: READ DMA
[    4.288581] ata2.01: cmd c8/00:08:67:2c:60/00:00:00:00:00/f2 tag 0 dma 4096 in
[    4.288583]          res 51/84:00:6e:2c:60/00:00:00:00:00/f2 Emask 0x10 (ATA bus error)
[    4.288586] ata2.01: status: { DRDY ERR }
[    4.288588] ata2.01: error: { ICRC ABRT }
[    4.288617] ata2: soft resetting link
[    4.644326] ata2.00: configured for UDMA/66
[    4.660519] ata2.01: configured for UDMA/100
[    4.660526] ata2: EH complete
[    4.671703] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    4.671706] ata2.01: BMDMA stat 0x64
[    4.671708] ata2.01: failed command: READ DMA
[    4.671714] ata2.01: cmd c8/00:08:67:2c:60/00:00:00:00:00/f2 tag 0 dma 4096 in
[    4.671715]          res 51/84:00:6e:2c:60/00:00:00:00:00/f2 Emask 0x10 (ATA bus error)
[    4.671718] ata2.01: status: { DRDY ERR }
[    4.671720] ata2.01: error: { ICRC ABRT }
[    4.671740] ata2: soft resetting link
[    4.856344] ata2.00: configured for UDMA/66
[    4.872489] ata2.01: configured for UDMA/100
[    4.872494] ata2: EH complete
[    4.886042] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    4.886044] ata2.01: BMDMA stat 0x64
[    4.886047] ata2.01: failed command: READ DMA
[    4.886052] ata2.01: cmd c8/00:08:67:2c:60/00:00:00:00:00/f2 tag 0 dma 4096 in
[    4.886054]          res 51/84:00:6e:2c:60/00:00:00:00:00/f2 Emask 0x10 (ATA bus error)
[    4.886057] ata2.01: status: { DRDY ERR }
[    4.886059] ata2.01: error: { ICRC ABRT }
[    4.886078] ata2: soft resetting link
[    5.072326] ata2.00: configured for UDMA/66
[    5.088526] ata2.01: configured for UDMA/100
[    5.088531] ata2: EH complete
[    5.100385] ata2.01: limiting speed to UDMA/66:PIO4
[    5.100388] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    5.100390] ata2.01: BMDMA stat 0x64
[    5.100393] ata2.01: failed command: READ DMA
[    5.100398] ata2.01: cmd c8/00:08:67:2c:60/00:00:00:00:00/f2 tag 0 dma 4096 in
[    5.100400]          res 51/84:00:6e:2c:60/00:00:00:00:00/f2 Emask 0x10 (ATA bus error)
[    5.100403] ata2.01: status: { DRDY ERR }
[    5.100405] ata2.01: error: { ICRC ABRT }
[    5.100423] ata2: soft resetting link
[    5.288327] ata2.00: configured for UDMA/66
[    5.320518] ata2.01: configured for UDMA/66
[    5.320522] ata2: EH complete
[    5.328121] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    5.328123] ata2.01: BMDMA stat 0x64
[    5.328126] ata2.01: failed command: READ DMA
[    5.328131] ata2.01: cmd c8/00:08:67:2c:60/00:00:00:00:00/f2 tag 0 dma 4096 in
[    5.328132]          res 51/84:00:6e:2c:60/00:00:00:00:00/f2 Emask 0x10 (ATA bus error)
[    5.328135] ata2.01: status: { DRDY ERR }
[    5.328137] ata2.01: error: { ICRC ABRT }
[    5.328156] ata2: soft resetting link
[    5.516336] ata2.00: configured for UDMA/66
[    5.532488] ata2.01: configured for UDMA/66
[    5.532493] ata2: EH complete
[    5.542461] ata2.01: limiting speed to UDMA/33:PIO4
[    5.542464] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    5.542466] ata2.01: BMDMA stat 0x64
[    5.542469] ata2.01: failed command: READ DMA
[    5.542474] ata2.01: cmd c8/00:08:67:2c:60/00:00:00:00:00/f2 tag 0 dma 4096 in
[    5.542476]          res 51/84:00:6e:2c:60/00:00:00:00:00/f2 Emask 0x10 (ATA bus error)
[    5.542479] ata2.01: status: { DRDY ERR }
[    5.542481] ata2.01: error: { ICRC ABRT }
[    5.542500] ata2: soft resetting link
[    5.728325] ata2.00: configured for UDMA/66
[    5.744489] ata2.01: configured for UDMA/33
[    5.744497] sd 1:0:1:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    5.744502] sd 1:0:1:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
[    5.744506] Descriptor sense data with sense descriptors (in hex):
[    5.744508]         72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[    5.744516]         02 60 2c 6e 
[    5.744520] sd 1:0:1:0: [sdc]  Add. Sense: Scsi parity error
[    5.744528] sd 1:0:1:0: [sdc] CDB: Read(10): 28 00 02 60 2c 67 00 00 08 00
[    5.744536] end_request: I/O error, dev sdc, sector 39857255
[    5.744540] Buffer I/O error on device sdc1, logical block 19928596
[    5.744544] Buffer I/O error on device sdc1, logical block 19928597
[    5.744546] Buffer I/O error on device sdc1, logical block 19928598
[    5.744549] Buffer I/O error on device sdc1, logical block 19928599
[    5.744557] ata2: EH complete
[   25.215282] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.215291] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   25.251921] udevd[324]: starting version 175
[   25.296108] lp: driver loaded but no devices found
[   25.474416] Adding 1832956k swap on /dev/sda5.  Priority:-1 extents:1 across:1832956k 
[   25.540347] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   25.541763] [drm] Initialized drm 1.1.0 20060810
[   25.544317] ali1563_smbus 0000:00:07.0: Found ALi1563 SMBus at 0x0400
[   25.592759] ali1535_smbus 0000:00:07.1: ALI1535_smb region uninitialized - upgrade BIOS?
[   25.592765] ali1535_smbus 0000:00:07.1: ALI1535 not detected, module not inserted.
[   25.620093] ali15x3_smbus 0000:00:07.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[   25.620102] ali15x3_smbus 0000:00:07.1: ALI15X3 not detected, module not inserted.
[   25.624506] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   25.770540] parport_pc 00:06: reported by Plug and Play ACPI
[   25.770671] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   25.883219] udevd[382]: renamed network interface eth1 to rename3
[   25.883692] udevd[381]: renamed network interface eth0 to eth1
[   25.904922] lp0: using parport0 (interrupt-driven).
[   25.928065] gameport gameport0: NS558 PnP Gameport is pnp00:07/gameport0, io 0x200, speed 728kHz
[   25.937656] udevd[382]: renamed network interface rename3 to eth0
[   25.962966] type=1400 audit(1350150719.866:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=428 comm="apparmor_parser"
[   25.963512] type=1400 audit(1350150719.866:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
[   25.963822] type=1400 audit(1350150719.866:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
[   25.965572] type=1400 audit(1350150719.870:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=432 comm="apparmor_parser"
[   25.966143] type=1400 audit(1350150719.870:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser"
[   25.966458] type=1400 audit(1350150719.870:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser"
[   26.029215] [drm] radeon defaulting to kernel modesetting.
[   26.029221] [drm] radeon kernel modesetting enabled.
[   26.064681] RPC: Registered named UNIX socket transport module.
[   26.064686] RPC: Registered udp transport module.
[   26.064688] RPC: Registered tcp transport module.
[   26.064690] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   26.078262] radeon 0000:01:00.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
[   26.078270] radeon 0000:01:00.0: setting latency timer to 64
[   26.079656] [drm] initializing kernel modesetting (RV515 0x1002:0x7183 0x174B:0x0840).
[   26.079684] [drm] register mmio base: 0xFF2F0000
[   26.079686] [drm] register mmio size: 65536
[   26.080453] ATOM BIOS: RV516PRO
[   26.080490] [drm] Generation 2 PCI interface, using max accessible memory
[   26.080497] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[   26.080500] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[   26.080521] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   26.080523] [drm] Driver supports precise vblank timestamp query.
[   26.080548] [drm] radeon: irq initialized.
[   26.080937] [drm] Detected VRAM RAM=256M, BAR=256M
[   26.080942] [drm] RAM width 128bits DDR
[   26.081204] FS-Cache: Loaded
[   26.084562] [TTM] Zone  kernel: Available graphics memory: 896624 kiB.
[   26.084566] [TTM] Initializing pool allocator.
[   26.084601] [drm] radeon: 256M of VRAM memory ready
[   26.084604] [drm] radeon: 512M of GTT memory ready.
[   26.084629] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   26.099503] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[   26.100680] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   26.117156] radeon 0000:01:00.0: WB enabled
[   26.121139] [drm] Loading R500 Microcode
[   26.146949] FS-Cache: Netfs 'nfs' registered for caching
[   26.192372] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   26.391791] Bluetooth: Core ver 2.16
[   26.391823] NET: Registered protocol family 31
[   26.391825] Bluetooth: HCI device and connection manager initialized
[   26.391829] Bluetooth: HCI socket layer initialized
[   26.391831] Bluetooth: L2CAP socket layer initialized
[   26.391838] Bluetooth: SCO socket layer initialized
[   26.393036] ppdev: user-space parallel port driver
[   26.428459] MCE: In-kernel MCE decoding enabled.
[   26.438422] type=1400 audit(1350150720.342:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=541 comm="apparmor_parser"
[   26.440324] CIFS VFS: Error connecting to socket. Aborting operation
[   26.444976] type=1400 audit(1350150720.350:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=541 comm="apparmor_parser"
[   26.493651] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.493655] Bluetooth: BNEP filters: protocol multicast
[   26.500176] EDAC MC: Ver: 2.1.0
[   26.507892] CIFS VFS: cifs_mount failed w/return code = -101
[   26.512465] Bluetooth: RFCOMM TTY layer initialized
[   26.512473] Bluetooth: RFCOMM socket layer initialized
[   26.512475] Bluetooth: RFCOMM ver 1.11
[   26.521809] AMD64 EDAC driver v3.4.0
[   26.528833] EDAC amd64: DRAM ECC disabled.
[   26.528841] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   26.528843]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   26.528844]  (Note that use of the override may cause unknown side effects.)
[   26.671033] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2A12
[   26.671082] usbcore: registered new interface driver usblp
[   26.758828] snd_intel8x0 0000:00:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   27.270087] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[   27.804734] AC'97 1 does not respond - RESET
[   27.805301] AC'97 1 access is not valid [0xffffffff], removing mixer.
[   27.805307] Unable to initialize codec #1
[   27.850500] CIFS VFS: Error connecting to socket. Aborting operation
[   27.850579] CIFS VFS: cifs_mount failed w/return code = -101
[   27.860079] intel8x0_measure_ac97_clock: measured 54203 usecs (2616 samples)
[   27.860084] intel8x0: clocking to 48000
[   27.922543] init: failsafe main process (780) killed by TERM signal
[   28.435859] 8139too 0000:04:06.0: eth1: link down
[   28.436940] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   28.442618] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   28.459321] type=1400 audit(1350150722.362:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=932 comm="apparmor_parser"
[   28.488549] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.489987] type=1400 audit(1350150722.394:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=934 comm="apparmor_parser"
[   28.496186] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.855488] [drm] radeon: ring at 0x0000000010001000
[   28.855520] [drm] ring test succeeded in 6 usecs
[   28.855681] [drm] radeon: ib pool ready.
[   28.855905] [drm] ib test succeeded in 0 usecs
[   28.856299] [drm] Radeon Display Connectors
[   28.856301] [drm] Connector 0:
[   28.856302] [drm]   VGA
[   28.856305] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   28.856307] [drm]   Encoders:
[   28.856308] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   28.856310] [drm] Connector 1:
[   28.856311] [drm]   S-video
[   28.856312] [drm]   Encoders:
[   28.856314] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[   28.856315] [drm] Connector 2:
[   28.856317] [drm]   DVI-I
[   28.856318] [drm]   HPD2
[   28.856320] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   28.856322] [drm]   Encoders:
[   28.856323] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   28.856325] [drm]     DFP3: INTERNAL_LVTM1
[   29.301609] [drm] fb mappable at 0xC00C0000
[   29.301613] [drm] vram apper at 0xC0000000
[   29.301615] [drm] size 5242880
[   29.301617] [drm] fb depth is 24
[   29.301618] [drm]    pitch is 5120
[   29.307818] fbcon: radeondrmfb (fb0) is primary device
[   29.308348] Console: switching to colour frame buffer device 160x64
[   29.308386] fb0: radeondrmfb frame buffer device
[   29.308388] drm: registered panic notifier
[   29.308402] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[   29.696229] init: gdm main process (1075) killed by TERM signal
[   30.381096] CIFS VFS: Error connecting to socket. Aborting operation
[   30.382100] CIFS VFS: cifs_mount failed w/return code = -101
[   30.545137] usblp0: removed
[   30.551675] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2A12
[   30.613186] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   30.696161] NFSD: starting 90-second grace period
[   31.480355] uli526x 0000:00:11.0: eth0: NIC Link is Up 100 Mbps Full duplex
[   31.480838] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   37.204520] init: plymouth-stop pre-start process (1529) terminated with status 1
[   38.012507] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
[   42.448016] eth0: no IPv6 routers present
[   74.576433] CIFS VFS: Autodisabling the use of server inode numbers on \\fritz.box\fritzBST. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message.