[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: System manufacturer System Product Name/P5PE-VM, BIOS 1203 01/22/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 3677e000 - 373b7000 [ 0.000000] ACPI: RSDP 000faf80 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 3ffb0000 00030 (v01 A M I OEMRSDT 01000722 MSFT 00000097) [ 0.000000] ACPI: FACP 3ffb0200 00081 (v02 A M I OEMFACP 01000722 MSFT 00000097) [ 0.000000] ACPI: DSDT 3ffb0400 0358D (v01 A0551 A0551036 00000036 INTL 02002026) [ 0.000000] ACPI: FACS 3ffc0000 00040 [ 0.000000] ACPI: APIC 3ffb0390 0006C (v01 A M I OEMAPIC 01000722 MSFT 00000097) [ 0.000000] ACPI: OEMB 3ffc0040 0003F (v01 A M I OEMBIOS 01000722 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ffb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffb0 [ 0.000000] On node 0 totalpages: 261951 [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f5f7e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34466 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000 [ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s28800 r0 d24448 u1048576 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259903 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=5346757d-d29a-4c08-9dd9-2a9c50a86557 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5240960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0) [ 0.000000] Memory: 1011576k/1048256k available (5188k kernel code, 36228k reserved, 2540k data, 700k init, 138952k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB) [ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2800.341 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.68 BogoMIPS (lpj=11201364) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004048] Security Framework initialized [ 0.004075] AppArmor: AppArmor initialized [ 0.004078] Yama: becoming mindful. [ 0.004172] Mount-cache hash table entries: 512 [ 0.004403] Initializing cgroup subsys ns [ 0.004410] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004414] Initializing cgroup subsys cpuacct [ 0.004422] Initializing cgroup subsys memory [ 0.004436] Initializing cgroup subsys devices [ 0.004440] Initializing cgroup subsys freezer [ 0.004443] Initializing cgroup subsys net_cls [ 0.004447] Initializing cgroup subsys blkio [ 0.004509] CPU: Physical Processor ID: 0 [ 0.004512] CPU: Processor Core ID: 0 [ 0.004517] mce: CPU supports 4 MCE banks [ 0.004533] CPU0: Thermal monitoring enabled (TM1) [ 0.004539] using mwait in idle threads. [ 0.008256] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [ 0.008268] Disabling lock debugging due to kernel taint [ 0.011566] ACPI: Core revision 20110112 [ 0.013392] CPU0: Core temperature/speed normal [ 0.016022] ftrace: allocating 23640 entries in 47 pages [ 0.020095] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.061681] CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07 [ 0.064003] APIC calibration not consistent with PM-Timer: 272ms instead of 100ms [ 0.064003] APIC delta adjusted to PM-Timer: 1250041 (3400317) [ 0.064003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.064003] ... version: 0 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 18 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 0000007fffffffff [ 0.064003] ... fixed-purpose events: 0 [ 0.064003] ... event mask: 000000000003ffff [ 0.064003] CPU 1 irqstacks, hard=f4cb2000 soft=f4cb4000 [ 0.064003] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.152030] Brought up 2 CPUs [ 0.152037] Total of 2 processors activated (11200.98 BogoMIPS). [ 0.152489] devtmpfs: initialized [ 0.157320] print_constraints: dummy: [ 0.157389] Time: 23:02:57 Date: 06/21/11 [ 0.157546] NET: Registered protocol family 16 [ 0.157891] Trying to unpack rootfs image as initramfs... [ 0.165199] EISA bus registered [ 0.165238] ACPI: bus type pci registered [ 0.166193] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.166200] PCI: Using configuration type 1 for base access [ 0.177043] bio: create slab at 0 [ 0.181245] ACPI: EC: Look up EC in DSDT [ 0.183381] ACPI: Executed 1 blocks of module-level executable AML code [ 0.197845] ACPI: Interpreter enabled [ 0.197858] ACPI: (supports S0 S1 S3 S4 S5) [ 0.197897] ACPI: Using IOAPIC for interrupt routing [ 0.219784] ACPI: No dock devices found. [ 0.219789] HEST: Table not found. [ 0.219796] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.219916] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.220189] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.220195] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.220199] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.220203] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffefffff] (ignored) [ 0.220224] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600 [ 0.220231] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.220244] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0fffffff pref] [ 0.220313] pci 0000:00:01.0: [8086:2571] type 1 class 0x000604 [ 0.220361] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880 [ 0.220376] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] [ 0.220467] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03 [ 0.220521] pci 0000:00:1d.0: reg 20: [io 0xb800-0xb81f] [ 0.220561] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03 [ 0.220614] pci 0000:00:1d.1: reg 20: [io 0xc000-0xc01f] [ 0.220655] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03 [ 0.220708] pci 0000:00:1d.2: reg 20: [io 0xc400-0xc41f] [ 0.220747] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03 [ 0.220800] pci 0000:00:1d.3: reg 20: [io 0xc800-0xc81f] [ 0.220854] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03 [ 0.220882] pci 0000:00:1d.7: reg 10: [mem 0xf8fffc00-0xf8ffffff] [ 0.220974] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.220981] pci 0000:00:1d.7: PME# disabled [ 0.221002] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.221055] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601 [ 0.221131] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.221155] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101 [ 0.221174] pci 0000:00:1f.1: reg 10: [io 0x9000-0x9007] [ 0.221186] pci 0000:00:1f.1: reg 14: [io 0x8800-0x8803] [ 0.221198] pci 0000:00:1f.1: reg 18: [io 0x8400-0x8407] [ 0.221210] pci 0000:00:1f.1: reg 1c: [io 0x8000-0x8003] [ 0.221222] pci 0000:00:1f.1: reg 20: [io 0x7800-0x780f] [ 0.221234] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.221268] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101 [ 0.221285] pci 0000:00:1f.2: reg 10: [io 0xa800-0xa807] [ 0.221296] pci 0000:00:1f.2: reg 14: [io 0xa400-0xa403] [ 0.221307] pci 0000:00:1f.2: reg 18: [io 0xa000-0xa007] [ 0.221318] pci 0000:00:1f.2: reg 1c: [io 0x9800-0x9803] [ 0.221329] pci 0000:00:1f.2: reg 20: [io 0x9400-0x940f] [ 0.221374] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401 [ 0.221395] pci 0000:00:1f.5: reg 10: [io 0xb400-0xb4ff] [ 0.221406] pci 0000:00:1f.5: reg 14: [io 0xb000-0xb03f] [ 0.221418] pci 0000:00:1f.5: reg 18: [mem 0xf8fff800-0xf8fff9ff] [ 0.221429] pci 0000:00:1f.5: reg 1c: [mem 0xf8fff400-0xf8fff4ff] [ 0.221474] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.221480] pci 0000:00:1f.5: PME# disabled [ 0.221521] pci 0000:01:00.0: [10de:00f2] type 0 class 0x000300 [ 0.221545] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.221558] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref] [ 0.221571] pci 0000:01:00.0: reg 18: [mem 0xf9000000-0xf9ffffff] [ 0.221609] pci 0000:01:00.0: reg 30: [mem 0xfbee0000-0xfbefffff pref] [ 0.221680] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.221687] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.221693] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfbefffff] [ 0.221699] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref] [ 0.221747] pci 0000:02:0d.0: [11ab:4320] type 0 class 0x000200 [ 0.221770] pci 0000:02:0d.0: reg 10: [mem 0xfbffc000-0xfbffffff] [ 0.221782] pci 0000:02:0d.0: reg 14: [io 0xe800-0xe8ff] [ 0.221826] pci 0000:02:0d.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref] [ 0.221853] pci 0000:02:0d.0: supports D1 D2 [ 0.221856] pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.221862] pci 0000:02:0d.0: PME# disabled [ 0.221897] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.221903] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.221909] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.221916] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.221920] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.221924] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.221939] pci_bus 0000:00: on NUMA node 0 [ 0.221945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.222065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.250659] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.250752] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.250841] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.250931] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.251019] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.251111] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.251201] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.251292] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.251489] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.251494] vgaarb: loaded [ 0.251856] SCSI subsystem initialized [ 0.260948] libata version 3.00 loaded. [ 0.261231] usbcore: registered new interface driver usbfs [ 0.261291] usbcore: registered new interface driver hub [ 0.261458] usbcore: registered new device driver usb [ 0.262004] wmi: Mapper loaded [ 0.262015] PCI: Using ACPI for IRQ routing [ 0.262031] PCI: pci_cache_line_size set to 64 bytes [ 0.262262] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.262273] reserve RAM buffer: 000000003ffb0000 - 000000003fffffff [ 0.262614] NetLabel: Initializing [ 0.262618] NetLabel: domain hash size = 128 [ 0.262620] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.262638] NetLabel: unlabeled traffic allowed by default [ 0.262795] hpet clockevent registered [ 0.262800] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.262806] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.262814] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.269161] Switching to clocksource hpet [ 0.270864] Switched to NOHz mode on CPU #0 [ 0.271018] Switched to NOHz mode on CPU #1 [ 0.286495] AppArmor: AppArmor Filesystem Enabled [ 0.286643] pnp: PnP ACPI init [ 0.286734] ACPI: bus type pnp registered [ 0.287212] pnp 00:00: [bus 00-ff] [ 0.287224] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.287235] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.287253] pnp 00:00: [io 0x0d00-0xffff window] [ 0.287264] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.287275] pnp 00:00: [mem 0x00000000 window] [ 0.287285] pnp 00:00: [mem 0x40000000-0xffefffff window] [ 0.287524] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.287713] pnp 00:01: [dma 4] [ 0.287723] pnp 00:01: [io 0x0000-0x000f] [ 0.287734] pnp 00:01: [io 0x0081-0x0083] [ 0.287740] pnp 00:01: [io 0x0087] [ 0.287747] pnp 00:01: [io 0x0089-0x008b] [ 0.287757] pnp 00:01: [io 0x008f] [ 0.287763] pnp 00:01: [io 0x00c0-0x00df] [ 0.287912] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.287972] pnp 00:02: [io 0x0070-0x0071] [ 0.288069] pnp 00:02: [irq 8] [ 0.288232] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.288250] pnp 00:03: [io 0x0061] [ 0.288305] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.288324] pnp 00:04: [io 0x00f0-0x00ff] [ 0.288332] pnp 00:04: [irq 13] [ 0.288388] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.288912] pnp 00:05: [irq 6] [ 0.288917] pnp 00:05: [dma 2] [ 0.288920] pnp 00:05: [io 0x03f0-0x03f5] [ 0.288923] pnp 00:05: [io 0x03f7] [ 0.289027] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.289531] pnp 00:06: [io 0x0378-0x037f] [ 0.289536] pnp 00:06: [io 0x0778-0x077b] [ 0.289543] pnp 00:06: [irq 7] [ 0.289547] pnp 00:06: [dma 3] [ 0.289806] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.289982] pnp 00:07: [io 0x0010-0x001f] [ 0.289986] pnp 00:07: [io 0x0022-0x003f] [ 0.289989] pnp 00:07: [io 0x0044-0x005f] [ 0.289992] pnp 00:07: [io 0x0062-0x0063] [ 0.289995] pnp 00:07: [io 0x0065-0x006f] [ 0.289998] pnp 00:07: [io 0x0072-0x007f] [ 0.290001] pnp 00:07: [io 0x0080] [ 0.290004] pnp 00:07: [io 0x0084-0x0086] [ 0.290007] pnp 00:07: [io 0x0088] [ 0.290010] pnp 00:07: [io 0x008c-0x008e] [ 0.290013] pnp 00:07: [io 0x0090-0x009f] [ 0.290016] pnp 00:07: [io 0x00a2-0x00bf] [ 0.290027] pnp 00:07: [io 0x00e0-0x00ef] [ 0.290030] pnp 00:07: [io 0x04d0-0x04d1] [ 0.290033] pnp 00:07: [io 0x0800-0x087f] [ 0.290036] pnp 00:07: [io 0x0400-0x041f] [ 0.290040] pnp 00:07: [io 0x0480-0x04bf] [ 0.290043] pnp 00:07: [mem 0xfed20000-0xfed8ffff] [ 0.290046] pnp 00:07: [mem 0xffb00000-0xffbfffff] [ 0.290158] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.290164] system 00:07: [io 0x0800-0x087f] has been reserved [ 0.290168] system 00:07: [io 0x0400-0x041f] has been reserved [ 0.290172] system 00:07: [io 0x0480-0x04bf] has been reserved [ 0.290177] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.290182] system 00:07: [mem 0xffb00000-0xffbfffff] could not be reserved [ 0.290188] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290269] pnp 00:08: [io 0x03f6] [ 0.290356] system 00:08: [io 0x03f6] has been reserved [ 0.290362] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290451] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.290456] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.290543] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.290550] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.290555] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290607] pnp 00:0a: [io 0x0060] [ 0.290610] pnp 00:0a: [io 0x0064] [ 0.290618] pnp 00:0a: [irq 1] [ 0.290680] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.291158] pnp 00:0b: [io 0x03f8-0x03ff] [ 0.291166] pnp 00:0b: [irq 4] [ 0.291283] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.291336] pnp 00:0c: [io 0x0000-0xffffffff disabled] [ 0.291340] pnp 00:0c: [io 0x0000-0xffffffff disabled] [ 0.291344] pnp 00:0c: [io 0x0290-0x0297] [ 0.291431] system 00:0c: [io 0x0290-0x0297] has been reserved [ 0.291438] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.291619] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.291624] pnp 00:0d: [mem 0x000c0000-0x000dffff] [ 0.291627] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.291630] pnp 00:0d: [mem 0x00100000-0x3ffeffff] [ 0.291634] pnp 00:0d: [mem 0xfff00000-0xffffffff] [ 0.291643] pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref] [ 0.291649] pnp 00:0d: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref] [ 0.291654] pnp 00:0d: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref] [ 0.291660] pnp 00:0d: disabling [mem 0x00100000-0x3ffeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref] [ 0.291749] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved [ 0.291756] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.292024] pnp: PnP ACPI: found 14 devices [ 0.292028] ACPI: ACPI bus type pnp unregistered [ 0.292034] PnPBIOS: Disabled by ACPI PNP [ 0.312369] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) [ 0.314764] CPU1: Core temperature/speed normal [ 0.333237] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff] [ 0.333247] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff]) [ 0.333254] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.333260] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.333267] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfbefffff] [ 0.333273] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref] [ 0.333281] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.333286] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.333293] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.333299] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.333321] pci 0000:00:1e.0: setting latency timer to 64 [ 0.333327] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.333331] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.333335] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.333339] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfbefffff] [ 0.333342] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff pref] [ 0.333346] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.333349] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.333353] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.333356] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.333417] NET: Registered protocol family 2 [ 0.333536] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.333991] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.334771] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.335343] TCP: Hash tables configured (established 131072 bind 65536) [ 0.335349] TCP reno registered [ 0.335356] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.335377] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.335786] NET: Registered protocol family 1 [ 0.336253] pci 0000:01:00.0: Boot video device [ 0.336276] PCI: CLS 16 bytes, default 64 [ 0.337180] cpufreq-nforce2: No nForce2 chipset. [ 0.337729] audit: initializing netlink socket (disabled) [ 0.337774] type=2000 audit(1308697377.336:1): initialized [ 0.359271] highmem bounce pool size: 64 pages [ 0.359298] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.362866] VFS: Disk quotas dquot_6.5.2 [ 0.362967] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.364165] fuse init (API version 7.16) [ 0.364323] msgmni has been set to 1704 [ 0.364715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.364759] io scheduler noop registered [ 0.364762] io scheduler deadline registered [ 0.364787] io scheduler cfq registered (default) [ 0.365011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.365055] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.365215] efifb: probing for efifb [ 0.365220] efifb: cannot reserve video memory at 0xa0000 [ 0.365226] efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 56k, total 64k [ 0.365229] efifb: mode is 640x350x1, linelength=80, pages=1 [ 0.365232] efifb: scrolling: redraw [ 0.365235] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.365380] Console: switching to colour frame buffer device 80x43 [ 0.365401] fb0: EFI VGA frame buffer device [ 0.365739] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.365762] ACPI: Power Button [PWRB] [ 0.365987] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.366003] ACPI: Power Button [PWRF] [ 0.366559] ACPI: acpi_idle registered with cpuidle [ 0.371690] ERST: Table is not found! [ 0.371874] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.392290] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.392335] isapnp: Scanning for PnP cards... [ 0.749701] isapnp: No Plug & Play device found [ 1.049904] Freeing initrd memory: 12516k freed [ 1.192661] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.192995] Linux agpgart interface v0.103 [ 1.193208] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 1.193219] agpgart-intel 0000:00:00.0: BAR 0: assigned [mem 0x50000000-0x5fffffff pref] [ 1.193228] agpgart-intel 0000:00:00.0: BAR 0: set to [mem 0x50000000-0x5fffffff pref] (PCI address [0x50000000-0x5fffffff]) [ 1.205821] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x50000000 [ 1.208092] brd: module loaded [ 1.209137] loop: module loaded [ 1.209301] i2c-core: driver [adp5520] using legacy suspend method [ 1.209304] i2c-core: driver [adp5520] using legacy resume method [ 1.209467] ata_piix 0000:00:1f.1: version 2.13 [ 1.209483] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.209506] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.209566] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.210179] scsi0 : ata_piix [ 1.210328] scsi1 : ata_piix [ 1.213036] ata1: PATA max UDMA/100 cmd 0x9000 ctl 0x8800 bmdma 0x7800 irq 18 [ 1.213041] ata2: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7808 irq 18 [ 1.213077] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.213218] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 1.213276] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.213686] scsi2 : ata_piix [ 1.213798] scsi3 : ata_piix [ 1.213880] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 18 [ 1.213885] ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 18 [ 1.214535] Fixed MDIO Bus: probed [ 1.214610] PPP generic driver version 2.4.2 [ 1.214701] tun: Universal TUN/TAP device driver, 1.6 [ 1.214704] tun: (C) 1999-2004 Max Krasnyansky [ 1.214867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.214909] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.214933] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.214938] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.215002] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.215208] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.219096] ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported [ 1.219117] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8fffc00 [ 1.232019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.232236] hub 1-0:1.0: USB hub found [ 1.232244] hub 1-0:1.0: 8 ports detected [ 1.232385] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.232409] uhci_hcd: USB Universal Host Controller Interface driver [ 1.232465] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.232474] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.232479] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.232560] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.232624] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800 [ 1.232833] hub 2-0:1.0: USB hub found [ 1.232842] hub 2-0:1.0: 2 ports detected [ 1.232951] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.232964] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.232969] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.233037] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.236055] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000 [ 1.236261] hub 3-0:1.0: USB hub found [ 1.236269] hub 3-0:1.0: 2 ports detected [ 1.236370] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.236378] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.236383] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.236445] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.236491] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400 [ 1.236695] hub 4-0:1.0: USB hub found [ 1.236702] hub 4-0:1.0: 2 ports detected [ 1.236807] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.236815] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.236820] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.236882] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.240044] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800 [ 1.240248] hub 5-0:1.0: USB hub found [ 1.240256] hub 5-0:1.0: 2 ports detected [ 1.240477] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.240481] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.241034] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.241221] mousedev: PS/2 mouse device common for all mice [ 1.241446] rtc_cmos 00:02: RTC can wake from S4 [ 1.244110] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.244136] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.244287] device-mapper: uevent: version 1.0.3 [ 1.244424] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.244525] device-mapper: multipath: version 1.2.0 loaded [ 1.244529] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.244651] EISA: Probing bus 0 at eisa.0 [ 1.244686] Cannot allocate resource for EISA slot 7 [ 1.244689] Cannot allocate resource for EISA slot 8 [ 1.244692] EISA: Detected 0 cards. [ 1.244779] cpuidle: using governor ladder [ 1.244782] cpuidle: using governor menu [ 1.245287] TCP cubic registered [ 1.245518] NET: Registered protocol family 10 [ 1.246520] NET: Registered protocol family 17 [ 1.246554] Registering the dns_resolver key type [ 1.246614] Using IPI No-Shortcut mode [ 1.246780] PM: Hibernation image not present or could not be loaded. [ 1.246801] registered taskstats version 1 [ 1.247048] Magic number: 15:978:49 [ 1.247167] rtc_cmos 00:02: setting system clock to 2011-06-21 23:02:58 UTC (1308697378) [ 1.247171] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.247174] EDD information not available. [ 1.260855] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.336032] Refined TSC clocksource calibration: 2800.086 MHz. [ 1.336041] Switching to clocksource tsc [ 1.379290] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223L, SB02, max UDMA/100 [ 1.389467] ata2.00: ATA-5: WDC WD400BB-00DEA0, 05.03E05, max UDMA/100 [ 1.389476] ata2.00: 78165360 sectors, multi 16: LBA [ 1.392261] ata3.00: configured for UDMA/100 [ 1.409422] ata1.00: HPA detected: current 234439535, native 234441648 [ 1.409428] ata1.00: ATA-6: WDC WD1200JB-00EVA0, 15.05R15, max UDMA/100 [ 1.409432] ata1.00: 234439535 sectors, multi 16: LBA48 [ 1.409661] ata1.01: ATA-6: ST3120022A, 8.01, max UDMA/100 [ 1.409666] ata1.01: 234441648 sectors, multi 16: LBA48 [ 1.418785] ata2.01: ATA-7: ST3250620A, 3.AAF, max UDMA/100 [ 1.418793] ata2.01: 488397168 sectors, multi 16: LBA48 [ 1.425448] ata1.00: configured for UDMA/100 [ 1.433296] ata2.00: configured for UDMA/100 [ 1.440633] ata1.01: configured for UDMA/100 [ 1.441134] scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-00E 15.0 PQ: 0 ANSI: 5 [ 1.442256] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.442843] scsi 0:0:1:0: Direct-Access ATA ST3120022A 8.01 PQ: 0 ANSI: 5 [ 1.443724] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.444244] sd 0:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.444441] sd 0:0:1:0: [sdb] Write Protect is off [ 1.444451] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.444530] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.458653] sdb: sdb1 [ 1.459680] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.459732] sd 0:0:0:0: [sda] 234439535 512-byte logical blocks: (120 GB/111 GiB) [ 1.459860] sd 0:0:0:0: [sda] Write Protect is off [ 1.459865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.459902] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.493642] ata2.01: configured for UDMA/100 [ 1.493765] scsi 1:0:0:0: Direct-Access ATA WDC WD400BB-00DE 05.0 PQ: 0 ANSI: 5 [ 1.494021] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 1.494183] scsi 1:0:1:0: Direct-Access ATA ST3250620A 3.AA PQ: 0 ANSI: 5 [ 1.494425] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 1.494549] sd 1:0:0:0: [sdc] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.494651] sd 1:0:0:0: [sdc] Write Protect is off [ 1.494656] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.494702] sd 1:0:1:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.494716] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.494792] sd 1:0:1:0: [sdd] Write Protect is off [ 1.494797] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.494833] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.495225] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223L SB02 PQ: 0 ANSI: 5 [ 1.498750] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.498756] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.498942] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.498954] sda: sda1 sda2 < sda5 > [ 1.499068] sr 2:0:0:0: Attached scsi generic sg4 type 5 [ 1.499120] sda: p5 size 6008832 extends beyond EOD, enabling native capacity [ 1.499173] ata1: soft resetting link [ 1.511918] sdc: sdc1 [ 1.732758] ata1.00: n_sectors mismatch 234439535 != 234441648 [ 1.732762] ata1.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated [ 1.749489] ata1.00: configured for UDMA/100 [ 1.764629] ata1.01: configured for UDMA/100 [ 1.764636] ata1: EH complete [ 1.764702] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.765129] sda: detected capacity change from 120033041920 to 120034123776 [ 1.768024] usb 1-7: new high speed USB device using ehci_hcd and address 4 [ 1.798861] sda: sda1 sda2 < sda5 > [ 1.799323] sdb: detected capacity change from 0 to 120034123776 [ 1.799437] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.799548] sda: detected capacity change from 0 to 120034123776 [ 1.799715] sdb: detected capacity change from 0 to 120034123776 [ 1.958590] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1.958594] ata2.01: BMDMA stat 0x64 [ 1.958599] ata2.01: failed command: READ DMA [ 1.958606] ata2.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in [ 1.958608] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) [ 1.958612] ata2.01: status: { DRDY ERR } [ 1.958615] ata2.01: error: { ICRC ABRT } [ 1.958649] ata2: soft resetting link [ 2.173499] ata2.00: configured for UDMA/100 [ 2.250616] ata2.01: configured for UDMA/100 [ 2.250627] ata2: EH complete [ 2.252018] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 2.404717] hub 2-1:1.0: USB hub found [ 2.406702] hub 2-1:1.0: 4 ports detected [ 2.652016] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 2.715525] ata2.01: limiting speed to UDMA/66:PIO4 [ 2.715530] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2.715533] ata2.01: BMDMA stat 0x64 [ 2.715536] ata2.01: failed command: READ DMA [ 2.715543] ata2.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in [ 2.715545] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) [ 2.715549] ata2.01: status: { DRDY ERR } [ 2.715551] ata2.01: error: { ICRC ABRT } [ 2.715583] ata2: soft resetting link [ 2.929478] ata2.00: configured for UDMA/100 [ 2.982642] ata2.01: configured for UDMA/66 [ 2.982651] ata2: EH complete [ 3.054880] sdd: sdd1 sdd2 < sdd5 > [ 3.054923] sd 1:0:0:0: [sdc] Attached SCSI disk [ 3.054991] sdc: detected capacity change from 0 to 40020664320 [ 3.055154] sdd: detected capacity change from 0 to 250059350016 [ 3.055427] sdc: detected capacity change from 0 to 40020664320 [ 3.055450] sd 1:0:1:0: [sdd] Attached SCSI disk [ 3.055506] Freeing unused kernel memory: 700k freed [ 3.055595] sdd: detected capacity change from 0 to 250059350016 [ 3.056146] Write protecting the kernel text: 5192k [ 3.056218] Write protecting the kernel read-only data: 2148k [ 3.096089] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 3.096222] <30>udev[73]: starting version 167 [ 3.301841] Floppy drive(s): fd0 is 1.44M [ 3.316161] usbcore: registered new interface driver uas [ 3.320088] FDC 0 is a post-1991 82077 [ 3.337391] Initializing USB Mass Storage driver... [ 3.338061] skge 0000:02:0d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.338113] skge: 1.13 addr 0xfbffc000 irq 23 chip Yukon-Lite rev 9 [ 3.338211] scsi4 : usb-storage 1-7:1.3 [ 3.338406] usbcore: registered new interface driver usb-storage [ 3.338410] USB Mass Storage support registered. [ 3.352974] skge 0000:02:0d.0: eth0: addr 00:1a:92:21:1a:56 [ 3.365694] usb 2-1.1: new low speed USB device using uhci_hcd and address 3 [ 3.403987] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3.403993] ata2.00: BMDMA stat 0x64 [ 3.403998] ata2.00: failed command: READ DMA [ 3.404038] ata2.00: cmd c8/00:08:08:03:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 3.404040] res 51/84:00:0f:03:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 3.404044] ata2.00: status: { DRDY ERR } [ 3.404047] ata2.00: error: { ICRC ABRT } [ 3.404085] ata2: soft resetting link [ 3.557539] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3 [ 3.557906] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0 [ 3.575481] generic-usb 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1 [ 3.575764] usbcore: registered new interface driver usbhid [ 3.575768] usbhid: USB HID core driver [ 3.593691] usb 2-1.4: new full speed USB device using uhci_hcd and address 4 [ 3.637514] ata2.00: configured for UDMA/100 [ 3.643304] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.681419] ata2.01: configured for UDMA/66 [ 3.681439] ata2: EH complete [ 3.687287] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3.687291] ata2.00: BMDMA stat 0x64 [ 3.687296] ata2.00: failed command: READ DMA [ 3.687304] ata2.00: cmd c8/00:08:08:03:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 3.687305] res 51/84:00:0f:03:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 3.687309] ata2.00: status: { DRDY ERR } [ 3.687312] ata2.00: error: { ICRC ABRT } [ 3.687350] ata2: soft resetting link [ 3.694694] usb 2-1.4: not running at top speed; connect to a high speed hub [ 3.705737] hub 2-1.4:1.0: USB hub found [ 3.707708] hub 2-1.4:1.0: 3 ports detected [ 3.905531] ata2.00: configured for UDMA/100 [ 3.947587] ata2.01: configured for UDMA/66 [ 3.947605] ata2: EH complete [ 3.954228] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3.954233] ata2.00: BMDMA stat 0x64 [ 3.954239] ata2.00: failed command: READ DMA [ 3.954246] ata2.00: cmd c8/00:08:08:03:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 3.954248] res 51/84:00:0f:03:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 3.954252] ata2.00: status: { DRDY ERR } [ 3.954255] ata2.00: error: { ICRC ABRT } [ 3.954289] ata2: soft resetting link [ 4.005686] usb 2-1.4.3: new low speed USB device using uhci_hcd and address 5 [ 4.169496] ata2.00: configured for UDMA/100 [ 4.213774] ata2.01: configured for UDMA/66 [ 4.213783] ata2: EH complete [ 4.221036] ata2.00: limiting speed to UDMA/66:PIO4 [ 4.221041] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.221044] ata2.00: BMDMA stat 0x64 [ 4.221048] ata2.00: failed command: READ DMA [ 4.221055] ata2.00: cmd c8/00:08:08:03:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 4.221057] res 51/84:00:0f:03:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 4.221060] ata2.00: status: { DRDY ERR } [ 4.221063] ata2.00: error: { ICRC ABRT } [ 4.221094] ata2: soft resetting link [ 4.304511] input: Ideazon Merc Stealth as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.0/input/input4 [ 4.304655] generic-usb 0003:1038:0510.0003: input,hidraw2: USB HID v1.11 Keyboard [Ideazon Merc Stealth] on usb-0000:00:1d.0-1.4.3/input0 [ 4.336848] scsi 4:0:0:0: Direct-Access HP Photosmart C4400 1.00 PQ: 0 ANSI: 5 [ 4.337587] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 4.338947] sd 4:0:0:0: [sde] Attached SCSI removable disk [ 4.403798] input: Ideazon Merc Stealth as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.1/input/input5 [ 4.404012] generic-usb 0003:1038:0510.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Ideazon Merc Stealth] on usb-0000:00:1d.0-1.4.3/input1 [ 4.437513] ata2.00: configured for UDMA/66 [ 4.479966] ata2.01: configured for UDMA/66 [ 4.479980] ata2: EH complete [ 4.487905] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.487909] ata2.00: BMDMA stat 0x64 [ 4.487913] ata2.00: failed command: READ DMA [ 4.487921] ata2.00: cmd c8/00:08:08:03:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 4.487923] res 51/84:00:0f:03:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 4.487926] ata2.00: status: { DRDY ERR } [ 4.487929] ata2.00: error: { ICRC ABRT } [ 4.487961] ata2: soft resetting link [ 4.701482] ata2.00: configured for UDMA/66 [ 4.746155] ata2.01: configured for UDMA/66 [ 4.746163] ata2: EH complete [ 4.754751] ata2.00: limiting speed to UDMA/33:PIO4 [ 4.754756] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.754759] ata2.00: BMDMA stat 0x64 [ 4.754762] ata2.00: failed command: READ DMA [ 4.754769] ata2.00: cmd c8/00:08:08:03:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 4.754771] res 51/84:00:0f:03:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 4.754775] ata2.00: status: { DRDY ERR } [ 4.754777] ata2.00: error: { ICRC ABRT } [ 4.754808] ata2: soft resetting link [ 4.969508] ata2.00: configured for UDMA/33 [ 5.012348] ata2.01: configured for UDMA/66 [ 5.012361] sd 1:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 5.012366] sd 1:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] [ 5.012374] Descriptor sense data with sense descriptors (in hex): [ 5.012377] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 5.012393] 00 00 03 0f [ 5.012400] sd 1:0:0:0: [sdc] Add. Sense: Scsi parity error [ 5.012408] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 03 08 00 00 08 00 [ 5.012422] end_request: I/O error, dev sdc, sector 776 [ 5.012428] Buffer I/O error on device sdc, logical block 97 [ 5.012467] ata2: EH complete [ 25.950027] <30>udev[294]: starting version 167 [ 25.986115] lp: driver loaded but no devices found [ 26.006757] Adding 3004412k swap on /dev/sda5. Priority:-1 extents:1 across:3004412k [ 26.036963] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 26.080270] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.221846] intel_rng: FWH not detected [ 26.381063] parport_pc 00:06: reported by Plug and Play ACPI [ 26.381270] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 26.383427] type=1400 audit(1308715403.630:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=519 comm="apparmor_parser" [ 26.384506] type=1400 audit(1308715403.634:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=519 comm="apparmor_parser" [ 26.385158] type=1400 audit(1308715403.634:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=519 comm="apparmor_parser" [ 26.477017] lp0: using parport0 (interrupt-driven). [ 26.506728] Linux video capture interface: v2.00 [ 26.536351] gspca: v2.12.0 registered [ 26.566162] gspca: probing 046d:08a6 [ 26.615467] nvidia: module license 'NVIDIA' taints kernel. [ 26.716600] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x6C11 [ 26.726195] usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0091 [ 26.726286] usbcore: registered new interface driver usblp [ 27.043650] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 27.043907] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 27.168480] ppdev: user-space parallel port driver [ 27.476040] intel8x0_measure_ac97_clock: measured 55102 usecs (2655 samples) [ 27.476046] intel8x0: clocking to 48000 [ 28.997243] zc3xx: probe 2wr ov vga 0x0000 [ 29.205835] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 29.205854] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 29.207028] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.06 Mon Apr 18 14:54:25 PDT 2011 [ 29.226152] type=1400 audit(1308715406.474:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=930 comm="apparmor_parser" [ 29.234930] type=1400 audit(1308715406.482:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=929 comm="apparmor_parser" [ 29.240755] type=1400 audit(1308715406.490:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=930 comm="apparmor_parser" [ 29.241422] type=1400 audit(1308715406.490:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=930 comm="apparmor_parser" [ 29.244039] zc3xx: probe sensor -> 0011 [ 29.244048] zc3xx: Find Sensor HV7131R [ 29.245406] input: zc3xx as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/input/input6 [ 29.245646] gspca: video0 created [ 29.245742] usbcore: registered new interface driver zc3xx [ 29.286915] type=1400 audit(1308715406.534:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=936 comm="apparmor_parser" [ 29.301680] type=1400 audit(1308715406.550:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=939 comm="apparmor_parser" [ 29.311052] type=1400 audit(1308715406.558:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=939 comm="apparmor_parser" [ 29.372900] skge 0000:02:0d.0: eth0: enabling interface [ 29.386515] usbcore: registered new interface driver snd-usb-audio [ 30.277686] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 30.281230] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 30.281291] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 31.126397] skge 0000:02:0d.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [ 31.628926] usb 5-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 31.629094] usb 1-7: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 34.689969] usb 5-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 34.690130] usb 1-7: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 38.671460] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 39.616032] eth0: no IPv6 routers present [ 299.988146] [Hardware Error]: Machine check events logged [ 305.614586] CPU0: Core temperature above threshold, cpu clock throttled (total events = 639) [ 305.683838] CPU0: Core temperature/speed normal [ 363.244623] CPU1: Core temperature/speed normal [ 449.988139] [Hardware Error]: Machine check events logged [ 666.055769] CPU0: Core temperature above threshold, cpu clock throttled (total events = 650) [ 666.156477] CPU0: Core temperature/speed normal [ 668.562907] CPU1: Core temperature/speed normal [ 674.988134] [Hardware Error]: Machine check events logged [ 1156.756704] CPU1: Core temperature/speed normal [ 1199.988103] [Hardware Error]: Machine check events logged [ 1498.007893] CPU1: Core temperature/speed normal [ 1500.000042] [Hardware Error]: Machine check events logged [ 1683.880499] CPU0: Core temperature above threshold, cpu clock throttled (total events = 687) [ 1683.885524] CPU0: Core temperature/speed normal [ 1826.149016] CPU1: Core temperature/speed normal [ 1949.988035] [Hardware Error]: Machine check events logged [ 2163.481589] CPU1: Core temperature/speed normal [ 2163.628434] CPU0: Core temperature above threshold, cpu clock throttled (total events = 696) [ 2163.637565] CPU0: Core temperature/speed normal [ 2249.988135] [Hardware Error]: Machine check events logged [ 2523.806791] CPU1: Core temperature/speed normal [ 2523.830257] CPU0: Core temperature above threshold, cpu clock throttled (total events = 724) [ 2523.836605] CPU0: Core temperature/speed normal [ 2699.988111] [Hardware Error]: Machine check events logged [ 2884.189059] CPU0: Core temperature above threshold, cpu clock throttled (total events = 738) [ 2884.224393] CPU0: Core temperature/speed normal [ 2948.509967] CPU1: Core temperature/speed normal [ 3000.000101] [Hardware Error]: Machine check events logged [ 3184.639353] CPU0: Core temperature above threshold, cpu clock throttled (total events = 740) [ 3184.772765] CPU0: Core temperature/speed normal [ 3303.550813] CPU1: Core temperature/speed normal [ 3449.988130] [Hardware Error]: Machine check events logged [ 3485.180499] CPU0: Core temperature above threshold, cpu clock throttled (total events = 751) [ 3485.315237] CPU0: Core temperature/speed normal [ 3599.984036] [Hardware Error]: Machine check events logged [ 3624.947518] CPU1: Core temperature/speed normal [ 3674.980037] [Hardware Error]: Machine check events logged [ 3963.954821] CPU1: Core temperature/speed normal [ 4023.208130] CPU0: Core temperature above threshold, cpu clock throttled (total events = 811) [ 4023.211956] CPU0: Core temperature/speed normal [ 4049.988134] [Hardware Error]: Machine check events logged [ 4323.281604] CPU1: Core temperature/speed normal [ 4323.292851] CPU0: Core temperature above threshold, cpu clock throttled (total events = 817) [ 4323.296670] CPU0: Core temperature/speed normal [ 4675.944895] CPU1: Core temperature/speed normal [ 4803.215119] CPU0: Core temperature above threshold, cpu clock throttled (total events = 850) [ 4803.218769] CPU0: Core temperature/speed normal [ 4977.796735] CPU1: Core temperature/speed normal [ 5223.678914] CPU0: Core temperature above threshold, cpu clock throttled (total events = 897) [ 5223.683851] CPU0: Core temperature/speed normal [ 5281.812194] CPU1: Core temperature/speed normal [ 5524.513772] CPU0: Core temperature above threshold, cpu clock throttled (total events = 915) [ 5524.681475] CPU0: Core temperature/speed normal [ 5643.194120] CPU1: Core temperature/speed normal [ 5943.199008] CPU0: Core temperature above threshold, cpu clock throttled (total events = 933) [ 5943.202799] CPU0: Core temperature/speed normal [ 5943.204215] CPU1: Core temperature above threshold, cpu clock throttled (total events = 3074) [ 5943.261776] CPU1: Core temperature/speed normal [ 6307.561302] CPU1: Core temperature/speed normal [ 6363.744880] CPU0: Core temperature above threshold, cpu clock throttled (total events = 945) [ 6363.748478] CPU0: Core temperature/speed normal [ 6688.037540] CPU1: Core temperature/speed normal [ 6845.193268] CPU0: Core temperature above threshold, cpu clock throttled (total events = 958) [ 6845.233584] CPU0: Core temperature/speed normal [ 7093.717493] CPU1: Core temperature/speed normal [ 7204.836637] CPU0: Core temperature above threshold, cpu clock throttled (total events = 961) [ 7205.101350] CPU0: Core temperature/speed normal [ 7449.048671] CPU1: Core temperature/speed normal [ 7624.585825] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1022) [ 7624.762652] CPU0: Core temperature/speed normal [ 7758.060443] CPU1: Core temperature/speed normal [ 7983.330021] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1059) [ 7983.339058] CPU0: Core temperature/speed normal [ 8103.753505] CPU1: Core temperature/speed normal [ 8525.071188] CPU1: Core temperature/speed normal [ 8525.082845] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1106) [ 8525.086576] CPU0: Core temperature/speed normal [ 8825.606124] CPU1: Core temperature/speed normal [ 8826.330213] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1123) [ 8826.451836] CPU0: Core temperature/speed normal [ 9186.251325] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1136) [ 9186.290442] CPU0: Core temperature/speed normal [ 9249.846953] CPU1: Core temperature/speed normal [ 9544.723606] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1139) [ 9544.786261] CPU0: Core temperature/speed normal [ 9603.297285] CPU1: Core temperature/speed normal [10112.185406] CPU1: Core temperature/speed normal [10445.287633] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1163) [10445.303188] CPU0: Core temperature/speed normal [10614.791448] CPU1: Core temperature/speed normal [10858.523024] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1168) [10862.779952] CPU0: Core temperature/speed normal [10923.187174] CPU1: Core temperature/speed normal [11163.977828] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1223) [11164.276563] CPU0: Core temperature/speed normal [11223.330868] CPU1: Core temperature/speed normal [11523.356278] CPU1: Core temperature/speed normal [11523.378155] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1230) [11523.383137] CPU0: Core temperature/speed normal [11943.016268] CPU1: Core temperature/speed normal [11943.044457] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1257) [11943.049360] CPU0: Core temperature/speed normal [12243.071814] CPU1: Core temperature/speed normal [12243.096972] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1289) [12243.101962] CPU0: Core temperature/speed normal [12725.086522] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1305) [12725.130989] CPU0: Core temperature/speed normal [12910.858901] CPU1: Core temperature/speed normal [13204.434568] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1307) [13204.625810] CPU0: Core temperature/speed normal [13273.231711] CPU1: Core temperature/speed normal [13868.127955] CPU1: Core temperature/speed normal [13922.955244] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1309) [13922.958896] CPU0: Core temperature/speed normal [14169.101631] CPU1: Core temperature/speed normal [14464.302215] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1327) [14468.318068] CPU0: Core temperature/speed normal [14469.114593] CPU1: Core temperature/speed normal [15224.636577] CPU1: Core temperature/speed normal [15242.877749] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1339) [15242.880244] CPU0: Core temperature/speed normal [17827.708967] CPU1: Core temperature above threshold, cpu clock throttled (total events = 5197) [17827.711408] CPU1: Core temperature/speed normal [21426.532756] CPU1: Core temperature above threshold, cpu clock throttled (total events = 5200) [21426.535217] CPU1: Core temperature/speed normal [21440.613234] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1435) [21440.615527] CPU0: Core temperature/speed normal [21726.532129] CPU1: Core temperature/speed normal [21791.083496] CPU0: Core temperature above threshold, cpu clock throttled (total events = 3085) [21791.086048] CPU0: Core temperature/speed normal [22027.168958] CPU1: Core temperature above threshold, cpu clock throttled (total events = 17165) [22027.172568] CPU1: Core temperature/speed normal [22091.087207] CPU0: Core temperature/speed normal [25279.782880] CPU0: Core temperature above threshold, cpu clock throttled (total events = 24792) [25279.783919] CPU0: Core temperature/speed normal [28884.055941] CPU0: Core temperature above threshold, cpu clock throttled (total events = 24868) [28884.057210] CPU0: Core temperature/speed normal [28884.667500] CPU1: Core temperature above threshold, cpu clock throttled (total events = 17482) [28884.668647] CPU1: Core temperature/speed normal [29184.058700] CPU0: Core temperature/speed normal [29186.331334] CPU1: Core temperature above threshold, cpu clock throttled (total events = 18203) [29186.335019] CPU1: Core temperature/speed normal [29484.057798] CPU0: Core temperature above threshold, cpu clock throttled (total events = 38474) [29484.065433] CPU0: Core temperature/speed normal [29508.905833] CPU1: Core temperature above threshold, cpu clock throttled (total events = 24269) [29508.911001] CPU1: Core temperature/speed normal [29784.083597] CPU0: Core temperature above threshold, cpu clock throttled (total events = 51385) [29784.088546] CPU0: Core temperature/speed normal [29817.277128] CPU1: Core temperature above threshold, cpu clock throttled (total events = 25294) [29817.279534] CPU1: Core temperature/speed normal [30084.090031] CPU0: Core temperature/speed normal [30124.826159] CPU1: Core temperature above threshold, cpu clock throttled (total events = 26217) [30124.831214] CPU1: Core temperature/speed normal [30384.995969] CPU0: Core temperature above threshold, cpu clock throttled (total events = 77258) [30385.001127] CPU0: Core temperature/speed normal [30424.834326] CPU1: Core temperature/speed normal [30724.315518] CPU0: Core temperature above threshold, cpu clock throttled (total events = 77560) [30724.318089] CPU0: Core temperature/speed normal [30724.913330] CPU1: Core temperature above threshold, cpu clock throttled (total events = 42202) [30724.917074] CPU1: Core temperature/speed normal [31024.942650] CPU1: Core temperature above threshold, cpu clock throttled (total events = 55074) [31024.949032] CPU1: Core temperature/speed normal [31024.995968] CPU0: Core temperature above threshold, cpu clock throttled (total events = 77789) [31024.999812] CPU0: Core temperature/speed normal [31324.949210] CPU1: Core temperature/speed normal [31325.590439] CPU0: Core temperature above threshold, cpu clock throttled (total events = 78302) [31325.595365] CPU0: Core temperature/speed normal [31624.948436] CPU1: Core temperature above threshold, cpu clock throttled (total events = 80243) [31624.956266] CPU1: Core temperature/speed normal [31684.902648] CPU0: Core temperature above threshold, cpu clock throttled (total events = 78769) [31684.906427] CPU0: Core temperature/speed normal [31925.002632] CPU1: Core temperature above threshold, cpu clock throttled (total events = 93117) [31925.010176] CPU1: Core temperature/speed normal [31987.062649] CPU0: Core temperature above threshold, cpu clock throttled (total events = 79011) [31987.068896] CPU0: Core temperature/speed normal [32225.622460] CPU1: Core temperature/speed normal [32289.102412] CPU0: Core temperature above threshold, cpu clock throttled (total events = 80425) [32289.107518] CPU0: Core temperature/speed normal [32526.306639] CPU1: Core temperature above threshold, cpu clock throttled (total events = 102460) [32526.311700] CPU1: Core temperature/speed normal [32589.104737] CPU0: Core temperature/speed normal [32826.310654] CPU1: Core temperature above threshold, cpu clock throttled (total events = 104440) [32826.318436] CPU1: Core temperature/speed normal [32889.108399] CPU0: Core temperature above threshold, cpu clock throttled (total events = 97094) [32889.117366] CPU0: Core temperature/speed normal [33127.601550] CPU1: Core temperature above threshold, cpu clock throttled (total events = 108452) [33127.605369] CPU1: Core temperature/speed normal [33217.818486] CPU0: Core temperature above threshold, cpu clock throttled (total events = 104327) [33217.822078] CPU0: Core temperature/speed normal [33427.627091] CPU1: Core temperature above threshold, cpu clock throttled (total events = 120743) [33427.633401] CPU1: Core temperature/speed normal [33522.231892] CPU0: Core temperature above threshold, cpu clock throttled (total events = 104863) [33522.234329] CPU0: Core temperature/speed normal [33727.632936] CPU1: Core temperature above threshold, cpu clock throttled (total events = 133017) [33727.650943] CPU1: Core temperature/speed normal [33834.119311] CPU0: Core temperature above threshold, cpu clock throttled (total events = 105529) [33834.123022] CPU0: Core temperature/speed normal [34027.664398] CPU1: Core temperature above threshold, cpu clock throttled (total events = 145307) [34027.670778] CPU1: Core temperature/speed normal [34146.158349] CPU0: Core temperature above threshold, cpu clock throttled (total events = 106092) [34146.160812] CPU0: Core temperature/speed normal [34327.693808] CPU1: Core temperature above threshold, cpu clock throttled (total events = 157385) [34327.706672] CPU1: Core temperature/speed normal [34446.171803] CPU0: Core temperature/speed normal [34632.545681] CPU1: Core temperature above threshold, cpu clock throttled (total events = 170094) [34632.549480] CPU1: Core temperature/speed normal [34746.729349] CPU0: Core temperature above threshold, cpu clock throttled (total events = 109858) [34746.732951] CPU0: Core temperature/speed normal [34932.583084] CPU1: Core temperature above threshold, cpu clock throttled (total events = 180318) [34932.594545] CPU1: Core temperature/speed normal [35050.102892] CPU0: Core temperature above threshold, cpu clock throttled (total events = 114249) [35050.105175] CPU0: Core temperature/speed normal [35232.602914] CPU1: Core temperature/speed normal [35350.787358] CPU0: Core temperature above threshold, cpu clock throttled (total events = 120731) [35350.791163] CPU0: Core temperature/speed normal [35533.443551] CPU1: Core temperature above threshold, cpu clock throttled (total events = 195789) [35533.445857] CPU1: Core temperature/speed normal [35652.409274] CPU0: Core temperature above threshold, cpu clock throttled (total events = 125241) [35652.411665] CPU0: Core temperature/speed normal [35834.063669] CPU1: Core temperature above threshold, cpu clock throttled (total events = 204016) [35834.068604] CPU1: Core temperature/speed normal [35959.882976] CPU0: Core temperature above threshold, cpu clock throttled (total events = 136219) [35959.886650] CPU0: Core temperature/speed normal [36136.056815] CPU1: Core temperature above threshold, cpu clock throttled (total events = 212518) [36136.060689] CPU1: Core temperature/speed normal [36259.886503] CPU0: Core temperature/speed normal [36483.808830] CPU1: Core temperature above threshold, cpu clock throttled (total events = 215810) [36483.812532] CPU1: Core temperature/speed normal [36560.413434] CPU0: Core temperature above threshold, cpu clock throttled (total events = 157982) [36560.417180] CPU0: Core temperature/speed normal [36783.825161] CPU1: Core temperature/speed normal [36903.576132] CPU0: Core temperature above threshold, cpu clock throttled (total events = 162778) [36903.581312] CPU0: Core temperature/speed normal [37084.853275] CPU1: Core temperature above threshold, cpu clock throttled (total events = 235399) [37084.862404] CPU1: Core temperature/speed normal [37203.586075] CPU0: Core temperature/speed normal [37384.863764] CPU1: Core temperature above threshold, cpu clock throttled (total events = 241563) [37384.880611] CPU1: Core temperature/speed normal [37505.703157] CPU0: Core temperature above threshold, cpu clock throttled (total events = 174914) [37505.706927] CPU0: Core temperature/speed normal [37684.884714] CPU1: Core temperature/speed normal [37806.249688] CPU0: Core temperature above threshold, cpu clock throttled (total events = 176975) [37806.252037] CPU0: Core temperature/speed normal [38026.755635] CPU1: Core temperature above threshold, cpu clock throttled (total events = 256147) [38026.758157] CPU1: Core temperature/speed normal [38106.837523] CPU0: Core temperature above threshold, cpu clock throttled (total events = 179779) [38106.845278] CPU0: Core temperature/speed normal [38336.636555] CPU1: Core temperature above threshold, cpu clock throttled (total events = 268031) [38336.640208] CPU1: Core temperature/speed normal [38407.591282] CPU0: Core temperature above threshold, cpu clock throttled (total events = 181963) [38407.593848] CPU0: Core temperature/speed normal [38636.643331] CPU1: Core temperature/speed normal [38724.167878] CPU0: Core temperature above threshold, cpu clock throttled (total events = 185327) [38724.171504] CPU0: Core temperature/speed normal [38946.194126] CPU1: Core temperature above threshold, cpu clock throttled (total events = 278226) [38946.206876] CPU1: Core temperature/speed normal [39026.372787] CPU0: Core temperature above threshold, cpu clock throttled (total events = 188084) [39026.376574] CPU0: Core temperature/speed normal [39336.242590] CPU0: Core temperature above threshold, cpu clock throttled (total events = 191776) [39336.245180] CPU0: Core temperature/speed normal [39337.545804] CPU1: Core temperature above threshold, cpu clock throttled (total events = 280604) [39337.548331] CPU1: Core temperature/speed normal [39636.246687] CPU0: Core temperature above threshold, cpu clock throttled (total events = 198838) [39636.263379] CPU0: Core temperature/speed normal [39652.937279] CPU1: Core temperature above threshold, cpu clock throttled (total events = 285910) [39652.943744] CPU1: Core temperature/speed normal [39936.853297] CPU0: Core temperature above threshold, cpu clock throttled (total events = 206836) [39936.856965] CPU0: Core temperature/speed normal [39952.943897] CPU1: Core temperature above threshold, cpu clock throttled (total events = 288654) [39952.952774] CPU1: Core temperature/speed normal