[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-21-generic (buildd@allspice) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu2) ) #31-Ubuntu SMP Mon Sep 13 23:14:37 UTC 2010 (Ubuntu 2.6.35-21.31-generic 2.6.35.4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-21-generic root=UUID=3d340910-477f-47e1-b408-51b028f6a237 ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfbe0000 (usable) [ 0.000000] BIOS-e820: 00000000dfbe0000 - 00000000dfbe2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfbe2000 - 00000000dfbf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfbf0000 - 00000000dfc00000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask FE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfbe0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfbe0000 (usable) [ 0.000000] modified: 00000000dfbe0000 - 00000000dfbe2000 (ACPI NVS) [ 0.000000] modified: 00000000dfbe2000 - 00000000dfbf0000 (ACPI data) [ 0.000000] modified: 00000000dfbf0000 - 00000000dfc00000 (reserved) [ 0.000000] modified: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f55d0] f55d0 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfbe0000 [ 0.000000] 0000000000 - 00dfa00000 page 2M [ 0.000000] 00dfa00000 - 00dfbe0000 page 4k [ 0.000000] kernel direct mapping tables up to dfbe0000 @ 16000-1c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 1a000-20000 [ 0.000000] RAMDISK: 370b1000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f6f90 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000dfbe2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000dfbe20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000dfbe2180 04D56 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000dfbe0000 00040 [ 0.000000] ACPI: HPET 00000000dfbe7040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000dfbe70c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000dfbe7100 00560 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000dfbe7660 009C2 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000dfbe6f40 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000dfbe8040 02C24 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880100200000-ffff880103bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfbe0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1047407 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3927 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898072 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [1b000 - 1b7ff] [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfbe0000 - 00000000dfbe2000 [ 0.000000] PM: Registered nosave memory: 00000000dfbe2000 - 00000000dfbf0000 [ 0.000000] PM: Registered nosave memory: 00000000dfbf0000 - 00000000dfc00000 [ 0.000000] PM: Registered nosave memory: 00000000dfc00000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dfc00000 (gap: dfc00000:14400000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u262144 [ 0.000000] pcpu-alloc: s91520 r8192 d23168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] early_res array is doubled to 128 at [1b800 - 1c7ff] [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031279 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-21-generic root=UUID=3d340910-477f-47e1-b408-51b028f6a237 ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Subtract (60 early reservations) [ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS [ 0.000000] #2 [00370b1000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001d18000 - 0001d180f6] BRK [ 0.000000] #4 [00000f55e0 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f55d0 - 00000f55e0] MP-table mpf [ 0.000000] #6 [000009f800 - 00000f0d00] BIOS reserved [ 0.000000] #7 [00000f0ecc - 00000f55d0] BIOS reserved [ 0.000000] #8 [00000f0d00 - 00000f0ecc] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 000001a000] PGTABLE [ 0.000000] #12 [000001a000 - 000001b000] PGTABLE [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #14 [0001d18100 - 0001d19100] BOOTMEM [ 0.000000] #15 [0001d17140 - 0001d17440] BOOTMEM [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #18 [0100200000 - 0103c00000] MEMMAP 0 [ 0.000000] #19 [0001d17440 - 0001d175c0] BOOTMEM [ 0.000000] #20 [0001d19100 - 0001d31100] BOOTMEM [ 0.000000] #21 [0001d31100 - 0001d34100] BOOTMEM [ 0.000000] #22 [0001d35000 - 0001d36000] BOOTMEM [ 0.000000] #23 [0001d175c0 - 0001d17601] BOOTMEM [ 0.000000] #24 [0001d17640 - 0001d17683] BOOTMEM [ 0.000000] #25 [0001d176c0 - 0001d17928] BOOTMEM [ 0.000000] #26 [0001d17940 - 0001d179a8] BOOTMEM [ 0.000000] #27 [0001d179c0 - 0001d17a28] BOOTMEM [ 0.000000] #28 [0001d17a40 - 0001d17aa8] BOOTMEM [ 0.000000] #29 [0001d17ac0 - 0001d17b28] BOOTMEM [ 0.000000] #30 [0001d17b40 - 0001d17ba8] BOOTMEM [ 0.000000] #31 [0001d17bc0 - 0001d17c28] BOOTMEM [ 0.000000] #32 [0001d17c40 - 0001d17ca8] BOOTMEM [ 0.000000] #33 [0001d17cc0 - 0001d17d28] BOOTMEM [ 0.000000] #34 [0001d17d40 - 0001d17da8] BOOTMEM [ 0.000000] #35 [0001d17dc0 - 0001d17e28] BOOTMEM [ 0.000000] #36 [0001d17e40 - 0001d17e60] BOOTMEM [ 0.000000] #37 [0001d17e80 - 0001d17ea0] BOOTMEM [ 0.000000] #38 [0001d17ec0 - 0001d17f6f] BOOTMEM [ 0.000000] #39 [0001d34100 - 0001d341af] BOOTMEM [ 0.000000] #40 [0001e00000 - 0001e1e000] BOOTMEM [ 0.000000] #41 [0001e40000 - 0001e5e000] BOOTMEM [ 0.000000] #42 [0001e80000 - 0001e9e000] BOOTMEM [ 0.000000] #43 [0001ec0000 - 0001ede000] BOOTMEM [ 0.000000] #44 [0001f00000 - 0001f1e000] BOOTMEM [ 0.000000] #45 [0001f40000 - 0001f5e000] BOOTMEM [ 0.000000] #46 [0001f80000 - 0001f9e000] BOOTMEM [ 0.000000] #47 [0001fc0000 - 0001fde000] BOOTMEM [ 0.000000] #48 [0001d17f80 - 0001d17f88] BOOTMEM [ 0.000000] #49 [0001d17fc0 - 0001d17fc8] BOOTMEM [ 0.000000] #50 [0001d341c0 - 0001d341e0] BOOTMEM [ 0.000000] #51 [0001d34200 - 0001d34240] BOOTMEM [ 0.000000] #52 [0001d34240 - 0001d34360] BOOTMEM [ 0.000000] #53 [0001d34380 - 0001d343c8] BOOTMEM [ 0.000000] #54 [0001d34400 - 0001d34448] BOOTMEM [ 0.000000] #55 [0001d36000 - 0001d3e000] BOOTMEM [ 0.000000] #56 [0001fde000 - 0005fde000] BOOTMEM [ 0.000000] #57 [0001d3e000 - 0001d5e000] BOOTMEM [ 0.000000] #58 [0001d5e000 - 0001d9e000] BOOTMEM [ 0.000000] #59 [000001c800 - 0000024800] BOOTMEM [ 0.000000] Memory: 4034076k/4718592k available (5707k kernel code, 528964k absent, 155552k reserved, 5383k data, 908k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 2797.935 MHz processor. [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5595.87 BogoMIPS (lpj=27979350) [ 0.000008] pid_max: default: 32768 minimum: 301 [ 0.000023] Security Framework initialized [ 0.000035] AppArmor: AppArmor initialized [ 0.000036] Yama: becoming mindful. [ 0.000350] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001103] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001404] Mount-cache hash table entries: 256 [ 0.001482] Initializing cgroup subsys ns [ 0.001485] Initializing cgroup subsys cpuacct [ 0.001488] Initializing cgroup subsys memory [ 0.001492] Initializing cgroup subsys devices [ 0.001494] Initializing cgroup subsys freezer [ 0.001495] Initializing cgroup subsys net_cls [ 0.001511] CPU: Physical Processor ID: 0 [ 0.001512] CPU: Processor Core ID: 0 [ 0.001516] mce: CPU supports 9 MCE banks [ 0.001524] CPU0: Thermal monitoring enabled (TM1) [ 0.001529] using mwait in idle threads. [ 0.001530] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. [ 0.001535] ... version: 3 [ 0.001536] ... bit width: 48 [ 0.001537] ... generic registers: 4 [ 0.001538] ... value mask: 0000ffffffffffff [ 0.001539] ... max period: 000000007fffffff [ 0.001540] ... fixed-purpose events: 3 [ 0.001541] ... event mask: 000000070000000f [ 0.003099] ACPI: Core revision 20100428 [ 0.011065] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.011068] ftrace: allocating 22671 entries in 89 pages [ 0.016710] Setting APIC routing to flat [ 0.017040] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.117797] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.228071] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. [ 1.484732] Brought up 8 CPUs [ 1.484735] Total of 8 processors activated (44767.28 BogoMIPS). [ 1.488028] devtmpfs: initialized [ 1.488751] regulator: core version 0.5 [ 1.488776] Time: 17:55:29 Date: 09/15/10 [ 1.488797] NET: Registered protocol family 16 [ 1.488861] Trying to unpack rootfs image as initramfs... [ 1.488871] ACPI: bus type pci registered [ 1.488917] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 1.488919] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 1.495256] PCI: Using configuration type 1 for base access [ 1.495812] bio: create slab at 0 [ 1.496578] ACPI: EC: Look up EC in DSDT [ 1.501893] ACPI: Interpreter enabled [ 1.501895] ACPI: (supports S0 S3 S4 S5) [ 1.501908] ACPI: Using IOAPIC for interrupt routing [ 1.505909] ACPI Warning: Incorrect checksum in table [TAMG] - 0x86, should be 0x85 (20100428/tbutils-314) [ 1.506004] ACPI: No dock devices found. [ 1.506006] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.506075] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 1.506209] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 1.506211] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 1.506213] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.506214] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 1.506216] pci_root PNP0A03:00: host bridge window [mem 0xdfc00000-0xfebfffff] [ 1.506291] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.506293] pci 0000:00:03.0: PME# disabled [ 1.506519] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f] [ 1.506574] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f] [ 1.506630] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f] [ 1.506684] pci 0000:00:1a.7: reg 10: [mem 0xfbfff000-0xfbfff3ff] [ 1.506732] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.506736] pci 0000:00:1a.7: PME# disabled [ 1.506764] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit] [ 1.506800] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.506803] pci 0000:00:1b.0: PME# disabled [ 1.506858] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.506861] pci 0000:00:1c.0: PME# disabled [ 1.506920] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.506923] pci 0000:00:1c.4: PME# disabled [ 1.506979] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.506982] pci 0000:00:1c.5: PME# disabled [ 1.507025] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f] [ 1.507081] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f] [ 1.507137] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f] [ 1.507192] pci 0000:00:1d.3: reg 20: [io 0xf900-0xf91f] [ 1.507246] pci 0000:00:1d.7: reg 10: [mem 0xfbffe000-0xfbffe3ff] [ 1.507294] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.507297] pci 0000:00:1d.7: PME# disabled [ 1.507436] pci 0000:00:1f.2: reg 10: [io 0xf800-0xf807] [ 1.507441] pci 0000:00:1f.2: reg 14: [io 0xf700-0xf703] [ 1.507445] pci 0000:00:1f.2: reg 18: [io 0xf600-0xf607] [ 1.507450] pci 0000:00:1f.2: reg 1c: [io 0xf500-0xf503] [ 1.507454] pci 0000:00:1f.2: reg 20: [io 0xf400-0xf40f] [ 1.507458] pci 0000:00:1f.2: reg 24: [io 0xf300-0xf30f] [ 1.507497] pci 0000:00:1f.3: reg 10: [mem 0xfbffd000-0xfbffd0ff 64bit] [ 1.507508] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 1.507540] pci 0000:00:1f.5: reg 10: [io 0xf100-0xf107] [ 1.507544] pci 0000:00:1f.5: reg 14: [io 0xf000-0xf003] [ 1.507548] pci 0000:00:1f.5: reg 18: [io 0xef00-0xef07] [ 1.507553] pci 0000:00:1f.5: reg 1c: [io 0xee00-0xee03] [ 1.507557] pci 0000:00:1f.5: reg 20: [io 0xed00-0xed0f] [ 1.507562] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f] [ 1.507628] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.507635] pci 0000:01:00.0: reg 18: [mem 0xfbcc0000-0xfbcdffff 64bit] [ 1.507640] pci 0000:01:00.0: reg 20: [io 0xce00-0xceff] [ 1.507647] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.507663] pci 0000:01:00.0: supports D1 D2 [ 1.507687] pci 0000:01:00.1: reg 10: [mem 0xfbcfc000-0xfbcfffff 64bit] [ 1.507717] pci 0000:01:00.1: supports D1 D2 [ 1.524510] pci 0000:00:03.0: PCI bridge to [bus 01-01] [ 1.524514] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 1.524516] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.524520] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 1.524556] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.524559] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.524562] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.524567] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.524670] pci 0000:03:00.0: reg 24: [mem 0xfbafe000-0xfbafffff] [ 1.524706] pci 0000:03:00.0: PME# supported from D3hot [ 1.524711] pci 0000:03:00.0: PME# disabled [ 1.524754] pci 0000:03:00.1: reg 10: [io 0xbf00-0xbf07] [ 1.524761] pci 0000:03:00.1: reg 14: [io 0xbe00-0xbe03] [ 1.524769] pci 0000:03:00.1: reg 18: [io 0xbd00-0xbd07] [ 1.524777] pci 0000:03:00.1: reg 1c: [io 0xbc00-0xbc03] [ 1.524784] pci 0000:03:00.1: reg 20: [io 0xbb00-0xbb0f] [ 1.524841] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.524853] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 1.524856] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 1.524859] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff] [ 1.524863] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.524923] pci 0000:04:00.0: reg 10: [io 0xde00-0xdeff] [ 1.524941] pci 0000:04:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref] [ 1.524953] pci 0000:04:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref] [ 1.524960] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.524996] pci 0000:04:00.0: supports D1 D2 [ 1.524998] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.525002] pci 0000:04:00.0: PME# disabled [ 1.544458] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 1.544462] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 1.544465] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.544469] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 1.544517] pci 0000:05:07.0: reg 10: [mem 0xfbbff000-0xfbbff7ff] [ 1.544523] pci 0000:05:07.0: reg 14: [mem 0xfbbf8000-0xfbbfbfff] [ 1.544562] pci 0000:05:07.0: supports D1 D2 [ 1.544563] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot [ 1.544567] pci 0000:05:07.0: PME# disabled [ 1.544599] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 1.544602] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.544606] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 1.544610] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.544612] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.544614] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.544615] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.544617] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 1.544619] pci 0000:00:1e.0: bridge window [mem 0xdfc00000-0xfebfffff] (subtractive decode) [ 1.544642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.544804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.544849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 1.544896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 1.544937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 1.563067] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 1.563141] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 1.563212] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 1.563284] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 1.563356] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 1.563427] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 1.563498] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 1.563569] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 1.563601] HEST: Table is not found! [ 1.563652] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.563655] vgaarb: loaded [ 1.563739] SCSI subsystem initialized [ 1.563852] libata version 3.00 loaded. [ 1.563881] usbcore: registered new interface driver usbfs [ 1.563888] usbcore: registered new interface driver hub [ 1.563904] usbcore: registered new device driver usb [ 1.563984] ACPI: WMI: Mapper loaded [ 1.563985] PCI: Using ACPI for IRQ routing [ 1.563987] PCI: pci_cache_line_size set to 64 bytes [ 1.564072] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 1.564074] reserve RAM buffer: 00000000dfbe0000 - 00000000dfffffff [ 1.564130] NetLabel: Initializing [ 1.564131] NetLabel: domain hash size = 128 [ 1.564132] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.564140] NetLabel: unlabeled traffic allowed by default [ 1.564163] alloc irq_desc for 40 on node 0 [ 1.564164] alloc kstat_irqs on node 0 [ 1.564170] alloc irq_desc for 41 on node 0 [ 1.564171] alloc kstat_irqs on node 0 [ 1.564174] alloc irq_desc for 42 on node 0 [ 1.564175] alloc kstat_irqs on node 0 [ 1.564178] alloc irq_desc for 43 on node 0 [ 1.564179] alloc kstat_irqs on node 0 [ 1.564181] alloc irq_desc for 44 on node 0 [ 1.564182] alloc kstat_irqs on node 0 [ 1.564184] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 1.564191] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0 [ 1.564195] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.574377] hpet: hpet2 irq 40 for MSI [ 1.574486] hpet: hpet3 irq 41 for MSI [ 1.584421] hpet: hpet4 irq 42 for MSI [ 1.594366] hpet: hpet5 irq 43 for MSI [ 1.594456] hpet: hpet6 irq 44 for MSI [ 1.614406] Switching to clocksource tsc [ 1.620079] AppArmor: AppArmor Filesystem Enabled [ 1.620089] pnp: PnP ACPI init [ 1.620099] ACPI: bus type pnp registered [ 1.621823] pnp: PnP ACPI: found 13 devices [ 1.621825] ACPI: ACPI bus type pnp unregistered [ 1.621832] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 1.621834] system 00:01: [io 0x0290-0x029f] has been reserved [ 1.621836] system 00:01: [io 0x0800-0x087f] has been reserved [ 1.621838] system 00:01: [io 0x0290-0x0294] has been reserved [ 1.621839] system 00:01: [io 0x0880-0x088f] has been reserved [ 1.621844] system 00:09: [io 0x0400-0x04cf] has been reserved [ 1.621846] system 00:09: [io 0x04d2-0x04ff] has been reserved [ 1.621850] system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved [ 1.621853] system 00:0b: [mem 0x000cf400-0x000cffff] has been reserved [ 1.621855] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved [ 1.621857] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 1.621859] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 1.621861] system 00:0b: [mem 0xdfbe0000-0xdfbeffff] could not be reserved [ 1.621863] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.621865] system 00:0b: [mem 0x00100000-0xdfbdffff] could not be reserved [ 1.621867] system 00:0b: [mem 0xdfbf0000-0xdfbfffff] has been reserved [ 1.621869] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.621870] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved [ 1.621872] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved [ 1.621876] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.621878] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved [ 1.621880] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 1.621882] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved [ 1.627195] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfc00000-0xdfdfffff] [ 1.627198] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfe00000-0xdfffffff 64bit pref] [ 1.627200] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref] [ 1.627202] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.627205] pci 0000:01:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref] [ 1.627207] pci 0000:00:03.0: PCI bridge to [bus 01-01] [ 1.627209] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 1.627212] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.627214] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 1.627218] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.627220] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 1.627224] pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfdfffff] [ 1.627227] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfffffff 64bit pref] [ 1.627232] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 1.627234] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 1.627238] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff] [ 1.627241] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 1.627246] pci 0000:04:00.0: BAR 6: assigned [mem 0xfbd00000-0xfbd1ffff pref] [ 1.627247] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 1.627249] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 1.627253] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.627256] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 1.627261] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 1.627262] pci 0000:00:1e.0: bridge window [io disabled] [ 1.627266] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 1.627269] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.627278] alloc irq_desc for 16 on node -1 [ 1.627280] alloc kstat_irqs on node -1 [ 1.627284] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.627286] pci 0000:00:03.0: setting latency timer to 64 [ 1.627292] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 1.627295] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.627299] pci 0000:00:1c.0: setting latency timer to 64 [ 1.627305] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.627308] pci 0000:00:1c.4: setting latency timer to 64 [ 1.627314] alloc irq_desc for 17 on node -1 [ 1.627315] alloc kstat_irqs on node -1 [ 1.627318] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.627321] pci 0000:00:1c.5: setting latency timer to 64 [ 1.627326] pci 0000:00:1e.0: setting latency timer to 64 [ 1.627328] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.627330] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.627331] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.627333] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 1.627334] pci_bus 0000:00: resource 8 [mem 0xdfc00000-0xfebfffff] [ 1.627336] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 1.627337] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 1.627339] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 1.627340] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 1.627342] pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfdfffff] [ 1.627343] pci_bus 0000:02: resource 2 [mem 0xdfe00000-0xdfffffff 64bit pref] [ 1.627345] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 1.627346] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff] [ 1.627348] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 1.627349] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 1.627351] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff] [ 1.627352] pci_bus 0000:04: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 1.627354] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 1.627356] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 1.627357] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 1.627358] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 1.627360] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 1.627361] pci_bus 0000:05: resource 8 [mem 0xdfc00000-0xfebfffff] [ 1.627382] NET: Registered protocol family 2 [ 1.627490] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.628220] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.630317] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.630571] TCP: Hash tables configured (established 524288 bind 65536) [ 1.630573] TCP reno registered [ 1.630580] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.630609] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.630690] NET: Registered protocol family 1 [ 1.674468] pci 0000:01:00.0: Boot video device [ 1.674482] PCI: CLS 64 bytes, default 64 [ 1.674484] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.674486] Placing 64MB software IO TLB between ffff880001fde000 - ffff880005fde000 [ 1.674487] software IO TLB at phys 0x1fde000 - 0x5fde000 [ 1.674814] Scanning for low memory corruption every 60 seconds [ 1.674909] audit: initializing netlink socket (disabled) [ 1.674917] type=2000 audit(1284573329.500:1): initialized [ 1.685847] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.686873] VFS: Disk quotas dquot_6.5.2 [ 1.686911] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.687302] fuse init (API version 7.14) [ 1.687359] msgmni has been set to 7879 [ 1.688887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.688889] io scheduler noop registered [ 1.688891] io scheduler deadline registered [ 1.688916] io scheduler cfq registered (default) [ 1.688993] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.689015] alloc irq_desc for 45 on node -1 [ 1.689016] alloc kstat_irqs on node -1 [ 1.689023] pcieport 0000:00:03.0: irq 45 for MSI/MSI-X [ 1.689067] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.689093] alloc irq_desc for 46 on node -1 [ 1.689094] alloc kstat_irqs on node -1 [ 1.689100] pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X [ 1.689151] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.689176] alloc irq_desc for 47 on node -1 [ 1.689177] alloc kstat_irqs on node -1 [ 1.689182] pcieport 0000:00:1c.4: irq 47 for MSI/MSI-X [ 1.689232] pcieport 0000:00:1c.5: setting latency timer to 64 [ 1.689257] alloc irq_desc for 48 on node -1 [ 1.689258] alloc kstat_irqs on node -1 [ 1.689264] pcieport 0000:00:1c.5: irq 48 for MSI/MSI-X [ 1.689320] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.689333] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.689385] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.689428] intel_idle: MWAIT substates: 0x1120 [ 1.689430] intel_idle: v0.4 model 0x1E [ 1.689431] intel_idle: lapic_timer_reliable_states 0x2 [ 1.689505] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.689509] ACPI: Power Button [PWRB] [ 1.689540] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.689542] ACPI: Power Button [PWRF] [ 1.689722] ACPI: acpi_idle yielding to intel_idle [ 1.699489] ERST: Table is not found! [ 1.699617] Linux agpgart interface v0.103 [ 1.699630] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.699720] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.699949] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.700599] brd: module loaded [ 1.700879] loop: module loaded [ 1.700978] ata_piix 0000:00:1f.2: version 2.13 [ 1.700988] alloc irq_desc for 19 on node -1 [ 1.700990] alloc kstat_irqs on node -1 [ 1.700994] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.700997] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.701024] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.701067] scsi0 : ata_piix [ 1.701113] scsi1 : ata_piix [ 1.701563] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19 [ 1.701568] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19 [ 1.701582] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.701586] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.701609] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.701633] scsi2 : ata_piix [ 1.701663] scsi3 : ata_piix [ 1.702048] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19 [ 1.702051] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19 [ 1.702085] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 1.702089] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.702108] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 1.702118] pata_acpi 0000:03:00.1: PCI INT B disabled [ 1.702277] Fixed MDIO Bus: probed [ 1.702295] PPP generic driver version 2.4.2 [ 1.702315] tun: Universal TUN/TAP device driver, 1.6 [ 1.702316] tun: (C) 1999-2004 Max Krasnyansky [ 1.702361] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.702374] alloc irq_desc for 18 on node -1 [ 1.702375] alloc kstat_irqs on node -1 [ 1.702379] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.702391] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.702394] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.702418] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.702439] ehci_hcd 0000:00:1a.7: debug port 2 [ 1.706322] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.706332] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfff000 [ 1.728672] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.728751] hub 1-0:1.0: USB hub found [ 1.728754] hub 1-0:1.0: 6 ports detected [ 1.728811] alloc irq_desc for 23 on node -1 [ 1.728812] alloc kstat_irqs on node -1 [ 1.728816] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.728829] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.728831] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.728859] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.728879] ehci_hcd 0000:00:1d.7: debug port 2 [ 1.732740] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.732752] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffe000 [ 1.739121] Freeing initrd memory: 15612k freed [ 1.748623] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.748724] hub 2-0:1.0: USB hub found [ 1.748727] hub 2-0:1.0: 8 ports detected [ 1.748788] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.748798] uhci_hcd: USB Universal Host Controller Interface driver [ 1.748847] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.748853] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.748856] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.748878] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.748909] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 1.748979] hub 3-0:1.0: USB hub found [ 1.748982] hub 3-0:1.0: 2 ports detected [ 1.749020] alloc irq_desc for 21 on node -1 [ 1.749022] alloc kstat_irqs on node -1 [ 1.749026] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.749030] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.749033] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.749052] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.749079] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 1.749145] hub 4-0:1.0: USB hub found [ 1.749148] hub 4-0:1.0: 2 ports detected [ 1.749185] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.749189] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.749192] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.749212] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.749232] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 1.749300] hub 5-0:1.0: USB hub found [ 1.749303] hub 5-0:1.0: 2 ports detected [ 1.749341] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.749345] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.749347] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.749368] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.749388] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 1.749456] hub 6-0:1.0: USB hub found [ 1.749459] hub 6-0:1.0: 2 ports detected [ 1.749496] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.749500] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.749502] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.749522] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.749542] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 1.749608] hub 7-0:1.0: USB hub found [ 1.749611] hub 7-0:1.0: 2 ports detected [ 1.749649] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.749653] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.749655] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.749675] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.749694] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 1.749764] hub 8-0:1.0: USB hub found [ 1.749767] hub 8-0:1.0: 2 ports detected [ 1.749803] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.749807] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.749810] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.749829] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9 [ 1.749849] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900 [ 1.749917] hub 9-0:1.0: USB hub found [ 1.749919] hub 9-0:1.0: 2 ports detected [ 1.749992] PNP: No PS/2 controller found. Probing ports directly. [ 1.783688] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.783690] If AUX port is really absent please use the 'i8042.noaux' option. [ 2.023584] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.023626] mice: PS/2 mouse device common for all mice [ 2.023684] rtc_cmos 00:04: RTC can wake from S4 [ 2.023706] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.023730] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.023797] device-mapper: uevent: version 1.0.3 [ 2.023862] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 2.023970] device-mapper: multipath: version 1.1.1 loaded [ 2.023971] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.024324] cpuidle: using governor ladder [ 2.024523] cpuidle: using governor menu [ 2.024706] TCP cubic registered [ 2.024785] NET: Registered protocol family 10 [ 2.025016] lo: Disabled Privacy Extensions [ 2.025144] NET: Registered protocol family 17 [ 2.027161] PM: Resume from disk failed. [ 2.027168] registered taskstats version 1 [ 2.027499] Magic number: 10:838:946 [ 2.027522] tty tty3: hash matches [ 2.027631] rtc_cmos 00:04: setting system clock to 2010-09-15 17:55:30 UTC (1284573330) [ 2.027636] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.027638] EDD information not available. [ 2.043529] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 2.058696] ata4: SATA link down (SStatus 0 SControl 300) [ 2.194412] hub 1-2:1.0: USB hub found [ 2.194478] hub 1-2:1.0: 4 ports detected [ 2.203137] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.223289] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100 [ 2.263113] ata3.00: configured for UDMA/100 [ 2.312831] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 2.552368] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.552383] ata1.01: SATA link down (SStatus 0 SControl 300) [ 2.552387] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.552398] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.572450] ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 2.572452] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.572518] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 2.572520] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.592520] ata1.00: configured for UDMA/133 [ 2.592531] ata2.00: configured for UDMA/133 [ 2.592669] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 [ 2.592846] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.592899] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.593032] sd 0:0:0:0: [sda] Write Protect is off [ 2.593040] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 [ 2.593046] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.593107] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.593186] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.593216] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.593300] sda: [ 2.593311] sd 1:0:0:0: [sdb] Write Protect is off [ 2.593313] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.593373] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.593666] sdb: [ 2.596873] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01 PQ: 0 ANSI: 5 [ 2.601418] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.601420] Uniform CD-ROM driver Revision: 3.20 [ 2.601473] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.601498] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 2.603754] sdb1 sdb2 < sda1 sda2 sda3 < sdb5 sda5 > [ 2.621640] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.622834] sdb6 > [ 2.623319] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.623417] Freeing unused kernel memory: 908k freed [ 2.623571] Write protecting the kernel read-only data: 10240k [ 2.623875] Freeing unused kernel memory: 416k freed [ 2.624165] Freeing unused kernel memory: 1644k freed [ 2.638626] udev[155]: starting version 162 [ 2.669291] [drm] Initialized drm 1.1.0 20060810 [ 2.677764] Initializing USB Mass Storage driver... [ 2.677851] scsi4 : usb-storage 1-4:1.0 [ 2.677920] usbcore: registered new interface driver usb-storage [ 2.677921] USB Mass Storage support registered. [ 2.679323] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.679340] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.679413] r8169 0000:04:00.0: setting latency timer to 64 [ 2.679454] alloc irq_desc for 49 on node -1 [ 2.679455] alloc kstat_irqs on node -1 [ 2.679468] r8169 0000:04:00.0: irq 49 for MSI/MSI-X [ 2.679912] r8169 0000:04:00.0: eth0: RTL8168d/8111d at 0xffffc90005176000, 6c:f0:49:79:79:c9, XID 083000c0 IRQ 49 [ 2.680701] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.680724] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 2.680779] scsi5 : pata_jmicron [ 2.680827] scsi6 : pata_jmicron [ 2.681406] ata5: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17 [ 2.681408] ata6: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17 [ 2.689422] Floppy drive(s): fd0 is 1.44M [ 2.702308] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 2.709809] FDC 0 is a post-1991 82077 [ 2.855712] ata5.00: ATA-7: Maxtor 7Y250P0, YAR41BW0, max UDMA/100 [ 2.855714] ata5.00: 490234752 sectors, multi 16: LBA48 [ 2.894474] ata5.00: configured for UDMA/100 [ 2.894675] scsi 5:0:0:0: Direct-Access ATA Maxtor 7Y250P0 YAR4 PQ: 0 ANSI: 5 [ 2.894878] sd 5:0:0:0: [sdc] 490234752 512-byte logical blocks: (251 GB/233 GiB) [ 2.894887] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 2.894938] sd 5:0:0:0: [sdc] Write Protect is off [ 2.894941] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.894975] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.895106] sdc: sdc1 [ 2.902451] sd 5:0:0:0: [sdc] Attached SCSI disk [ 3.071190] firewire_ohci 0000:05:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.071610] ahci 0000:03:00.0: version 3.0 [ 3.071624] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.083212] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 3.083216] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 3.083221] ahci 0000:03:00.0: setting latency timer to 64 [ 3.083407] scsi7 : ahci [ 3.083470] scsi8 : ahci [ 3.083546] ata7: SATA max UDMA/133 abar m8192@0xfbafe000 port 0xfbafe100 irq 16 [ 3.083549] ata8: SATA max UDMA/133 abar m8192@0xfbafe000 port 0xfbafe180 irq 16 [ 3.088586] [drm] VGACON disable radeon kernel modesetting. [ 3.088765] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.088768] pci 0000:01:00.0: setting latency timer to 64 [ 3.088907] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0 [ 3.130668] firewire_ohci: Added fw-ohci device 0000:05:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 3.404935] scsi9 : usb-storage 2-4:1.0 [ 3.429906] ata7: SATA link down (SStatus 0 SControl 300) [ 3.429943] ata8: SATA link down (SStatus 0 SControl 300) [ 3.496116] uvesafb: failed to execute /sbin/v86d [ 3.496121] uvesafb: make sure that the v86d helper is installed and executable [ 3.496125] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 3.496129] uvesafb: vbe_init() failed with -22 [ 3.496136] uvesafb: probe of uvesafb.0 failed with error -22 [ 3.594151] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 3.607547] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem [ 3.607550] EXT4-fs (sdb1): write access will be enabled during recovery [ 3.623186] firewire_core: created device fw0: GUID 00393ff5006cf049, S400 [ 3.674480] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2 [ 3.675885] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 3.676689] sd 4:0:0:0: [sdd] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 3.677805] sd 4:0:0:0: [sdd] Write Protect is off [ 3.677807] sd 4:0:0:0: [sdd] Mode Sense: 03 00 00 00 [ 3.677809] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 3.680389] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 3.680395] sdd: sdd1 [ 3.682744] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 3.682747] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 3.738966] usb 6-2: new full speed USB device using uhci_hcd and address 2 [ 4.308670] usb 8-1: new low speed USB device using uhci_hcd and address 2 [ 4.403915] scsi 9:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 4.410274] scsi 9:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 4.416600] scsi 9:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 4.422996] scsi 9:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 4.423522] sd 9:0:0:0: Attached scsi generic sg5 type 0 [ 4.423596] sd 9:0:0:1: Attached scsi generic sg6 type 0 [ 4.423686] sd 9:0:0:2: Attached scsi generic sg7 type 0 [ 4.423821] sd 9:0:0:3: Attached scsi generic sg8 type 0 [ 4.427631] sd 9:0:0:0: [sde] Attached SCSI removable disk [ 4.428376] sd 9:0:0:2: [sdg] Attached SCSI removable disk [ 4.429123] sd 9:0:0:3: [sdh] Attached SCSI removable disk [ 4.436527] sd 9:0:0:1: [sdf] Attached SCSI removable disk [ 4.516935] usbcore: registered new interface driver hiddev [ 4.517018] usbcore: registered new interface driver usbhid [ 4.517019] usbhid: USB HID core driver [ 4.531523] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2 [ 4.531571] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input0 [ 4.590457] usb 1-2.4: new high speed USB device using ehci_hcd and address 4 [ 4.622075] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor [ 4.670154] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input3 [ 4.670230] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input1 [ 5.233946] EXT4-fs (sdb1): recovery complete [ 5.234210] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 6.874493] Adding 11913212k swap on /dev/sdb5. Priority:-1 extents:1 across:11913212k [ 7.312063] udev[533]: starting version 162 [ 8.242895] type=1400 audit(1284569736.722:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=679 comm="apparmor_parser" [ 8.243206] type=1400 audit(1284569736.722:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=679 comm="apparmor_parser" [ 8.243376] type=1400 audit(1284569736.722:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=679 comm="apparmor_parser" [ 8.752019] Bluetooth: Core ver 2.15 [ 8.752033] NET: Registered protocol family 31 [ 8.752035] Bluetooth: HCI device and connection manager initialized [ 8.752037] Bluetooth: HCI socket layer initialized [ 8.862021] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 8.862194] usbcore: registered new interface driver btusb [ 9.142183] lp: driver loaded but no devices found [ 9.298251] it87: Found IT8720F chip at 0x290, revision 8 [ 9.298288] it87: VID is disabled (pins used for GPIO) [ 9.298297] it87: Routing internal VCCH to in7 [ 9.298298] it87: in3 is VCC (+5V) [ 9.298299] it87: in7 is VCCH (+5V Stand-By) [ 9.298303] it87: Beeping is supported [ 9.491384] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned. [ 9.493760] rtusb init ---> [ 9.493792] usbcore: registered new interface driver rt2870 [ 9.633895] alloc irq_desc for 22 on node -1 [ 9.633897] alloc kstat_irqs on node -1 [ 9.633902] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.634055] alloc irq_desc for 50 on node -1 [ 9.634057] alloc kstat_irqs on node -1 [ 9.634064] HDA Intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 9.634088] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.766263] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3425 [ 9.766275] usbcore: registered new interface driver usblp [ 9.787088] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 9.787167] alloc irq_desc for 51 on node -1 [ 9.787168] alloc kstat_irqs on node -1 [ 9.787179] HDA Intel 0000:01:00.1: irq 51 for MSI/MSI-X [ 9.787198] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 10.041150] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 10.082994] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 10.916009] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 11.902568] type=1400 audit(1284569740.392:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1192 comm="apparmor_parser" [ 11.902950] type=1400 audit(1284569740.392:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1192 comm="apparmor_parser" [ 11.903152] type=1400 audit(1284569740.392:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1192 comm="apparmor_parser" [ 11.946407] type=1400 audit(1284569740.432:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1198 comm="apparmor_parser" [ 11.951900] type=1400 audit(1284569740.442:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1200 comm="apparmor_parser" [ 11.962140] type=1400 audit(1284569740.452:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1199 comm="apparmor_parser" [ 11.969018] type=1400 audit(1284569740.462:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1193 comm="apparmor_parser" [ 12.318768] ppdev: user-space parallel port driver [ 13.100525] r8169 0000:04:00.0: eth0: link up [ 13.100530] r8169 0000:04:00.0: eth0: link up [ 14.250078] usb 1-2.4: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 15.060134] audit_printk_skb: 15 callbacks suppressed [ 15.060136] type=1400 audit(1284569743.562:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1196 comm="apparmor_parser" [ 17.755316] type=1400 audit(1284569734.948:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1547 comm="apparmor_parser" [ 18.633732] Bridge firewalling registered [ 19.081132] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.094401] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 20.094524] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 20.094526] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 20.094527] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 20.745691] Bluetooth: L2CAP ver 2.14 [ 20.745693] Bluetooth: L2CAP socket layer initialized [ 20.802971] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.802973] Bluetooth: BNEP filters: protocol multicast [ 20.921795] Bluetooth: SCO (Voice Link) ver 0.6 [ 20.921797] Bluetooth: SCO socket layer initialized [ 21.178085] Bluetooth: RFCOMM TTY layer initialized [ 21.178095] Bluetooth: RFCOMM socket layer initialized [ 21.178096] Bluetooth: RFCOMM ver 1.11 [ 23.020443] ata1.00: configured for UDMA/133 [ 23.020450] ata1: EH complete [ 23.140102] ata2.00: configured for UDMA/133 [ 23.140109] ata2: EH complete [ 23.240827] ata5.00: configured for UDMA/100 [ 23.240830] ata5: EH complete [ 23.994362] eth0: no IPv6 routers present [ 24.914605] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 25.264984] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 25.319728] EXT4-fs (sdb6): re-mounted. Opts: commit=0 [ 27.099417] ata1.00: configured for UDMA/133 [ 27.099424] ata1: EH complete [ 27.259006] ata2.00: configured for UDMA/133 [ 27.259012] ata2: EH complete [ 27.349654] ata5.00: configured for UDMA/100 [ 27.349660] ata5: EH complete [ 28.443733] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 28.654961] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 28.656520] EXT4-fs (sdb6): re-mounted. Opts: commit=0 [ 29.080617] virbr0: no IPv6 routers present [ 29.108834] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 31.807561] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 35.778569] lo: Disabled Privacy Extensions [ 52.352482] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 52.816500] ISOFS: changing to secondary root [ 53.982823] gwibber-service[2586]: segfault at ec018e28 ip 00007f6a01d10c2d sp 00007fff4ea16250 error 4 in libc-2.12.1.so[7f6a01c93000+17a000] [ 53.984212] gwibber-service[2589]: segfault at ec018e28 ip 00007f6a01d10c2d sp 00007fff4ea16120 error 4 in libc-2.12.1.so[7f6a01c93000+17a000] [ 53.984707] gwibber-service[2587]: segfault at ec018e28 ip 00007f6a01d10c2d sp 00007fff4ea16250 error 4 in libc-2.12.1.so[7f6a01c93000+17a000] [ 53.985149] gwibber-service[2588]: segfault at ec018e28 ip 00007f6a01d10c2d sp 00007fff4ea16250 error 4 in libc-2.12.1.so[7f6a01c93000+17a000] [ 77.718078] telepathy-gabbl[2768]: segfault at 20 ip 00007f5e03101d34 sp 00007fff4dc24ba0 error 4 in libtelepathy-glib.so.0.44.0[7f5e030c9000+131000] [ 1190.455675] gwibber-service[2593]: segfault at ec018da8 ip 00007f6a01d10c2d sp 00007fff4ea16120 error 4 in libc-2.12.1.so[7f6a01c93000+17a000] [ 1190.457245] gwibber-service[2590]: segfault at ec018da8 ip 00007f6a01d10c2d sp 00007fff4ea16250 error 4 in libc-2.12.1.so[7f6a01c93000+17a000] [ 1190.458004] gwibber-service[2592]: segfault at ec018da8 ip 00007f6a01d10c2d sp 00007fff4ea16250 error 4 in libc-2.12.1.so[7f6a01c93000+17a000] [ 1190.463558] gwibber-service[2591]: segfault at ec018da8 ip 00007f6a01d10c2d sp 00007fff4ea16250 error 4 in libc-2.12.1.so[7f6a01c93000+17a000] [ 1317.428114] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [ 1711.062488] npviewer.bin[3640]: segfault at f273504c ip 00000000f6190757 sp 00000000ff93db60 error 4 in libflashplayer.so[f5df1000+b2c000] [ 3088.652476] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [ 9730.849621] npviewer.bin[16111]: segfault at 418 ip 00000000f5ff6dd6 sp 00000000fffad508 error 6 in libflashplayer.so[f5da8000+b2c000] [10795.880593] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [10983.376302] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [11741.331402] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [14259.943457] npviewer.bin[16383]: segfault at 418 ip 00000000f5fc0dd6 sp 00000000ff8d2008 error 6 in libflashplayer.so[f5d72000+b2c000] [14268.633990] npviewer.bin[22421]: segfault at f26bd054 ip 00000000f61aa733 sp 00000000ff851930 error 4 in libflashplayer.so[f5e0b000+b2c000] [15549.065493] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [19005.745302] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [23220.394710] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [24961.686003] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [28809.311757] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [36590.335896] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [45390.595600] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [47583.258593] type=1400 audit(1284617428.698:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/libvirtd" pid=4128 comm="apparmor_parser" [47583.293057] type=1400 audit(1284617428.738:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/libvirt/virt-aa-helper" pid=4130 comm="apparmor_parser" [47594.557514] lo: Disabled Privacy Extensions [52010.755884] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [52866.450890] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [53277.330152] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [55499.348574] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [56688.127086] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [56736.411316] type=1400 audit(1284626606.538:21): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18626 comm="apparmor_parser" [56736.432567] type=1400 audit(1284626606.548:22): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18630 comm="apparmor_parser" [56807.142557] npviewer.bin[22463]: segfault at 0 ip 00000000f611a741 sp 00000000fffb9010 error 4 in libflashplayer.so[f5d7b000+b2c000] [56821.972789] npviewer.bin[20031]: segfault at 0 ip 00000000f61f8741 sp 00000000ff9c4190 error 4 in libflashplayer.so[f5e59000+b2c000] [56826.824626] npviewer.bin[20052]: segfault at 418 ip 00000000f60a1dd6 sp 00000000ffb3cf98 error 6 in libflashplayer.so[f5e53000+b2c000] [56843.817267] npviewer.bin[20079]: segfault at 418 ip 00000000f603add6 sp 00000000ffe8ca28 error 6 in libflashplayer.so[f5dec000+b2c000] [57509.915898] npviewer.bin[20889]: segfault at 418 ip 00000000f5fb4dd6 sp 00000000fff2d998 error 6 in libflashplayer.so[f5d66000+b2c000] [57581.733970] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [58161.319649] npviewer.bin[21097]: segfault at 0 ip 00000000f6133741 sp 00000000ffc4c290 error 4 in libflashplayer.so[f5d94000+b2c000] [58391.181569] npviewer.bin[22043]: segfault at f256f054 ip 00000000f617b733 sp 00000000ffd56ff0 error 4 in libflashplayer.so[f5ddc000+b2c000] [58867.869085] npviewer.bin[22424]: segfault at f5864054 ip 00000000f615d733 sp 00000000ffaddf20 error 4 in libflashplayer.so[f5dbe000+b2c000] [58930.610186] npviewer.bin[23141]: segfault at f57d504c ip 00000000f61ea757 sp 00000000ff8d1e30 error 4 in libflashplayer.so[f5e4b000+b2c000] [58948.895108] npviewer.bin[23248]: segfault at f576104c ip 00000000f6176757 sp 00000000ffe7f060 error 4 in libflashplayer.so[f5dd7000+b2c000] [60884.827879] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [62593.051119] usb 1-2.4: USB disconnect, address 4 [62593.051248] usblp0: removed [62599.336009] usb 1-2.2: new high speed USB device using ehci_hcd and address 5 [62599.447364] usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3425 [62600.786649] usb 1-2.2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [62617.306220] usb 1-2.2: USB disconnect, address 5 [62617.306440] usblp0: removed [62621.027472] usb 1-2.2: new high speed USB device using ehci_hcd and address 6 [62621.138531] usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3425 [62622.425854] usb 1-2.2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [63453.778897] npviewer.bin[23295]: segfault at f25b2054 ip 00000000f6144733 sp 00000000ffb406b0 error 4 in libflashplayer.so[f5da5000+b2c000] [65552.719342] npviewer.bin[31975]: segfault at 0 ip 00000000f6107741 sp 00000000ff8c1f20 error 4 in libflashplayer.so[f5d68000+b2c000] [65668.642347] npviewer.bin[687]: segfault at 418 ip 00000000f5fb7dd6 sp 00000000ff941168 error 6 in libflashplayer.so[f5d69000+b2c000] [65715.952171] npviewer.bin[890]: segfault at 8 ip 00000000f60529ea sp 00000000ffd55d10 error 4 in libflashplayer.so[f5e03000+b2c000] [65744.189596] npviewer.bin[1040]: segfault at 418 ip 00000000f600cdd6 sp 00000000ffaad298 error 6 in libflashplayer.so[f5dbe000+b2c000] [65758.935292] npviewer.bin[1067]: segfault at 418 ip 00000000f6093dd6 sp 00000000ffa75898 error 6 in libflashplayer.so[f5e45000+b2c000] [66288.850613] npviewer.bin[1538]: segfault at 418 ip 00000000f6074dd6 sp 00000000ffe8d098 error 6 in libflashplayer.so[f5e26000+b2c000] [66380.633715] npviewer.bin[2217]: segfault at 418 ip 00000000f5fffdd6 sp 00000000ff930918 error 6 in libflashplayer.so[f5db1000+b2c000] [66587.271674] npviewer.bin[2382]: segfault at 418 ip 00000000f6085dd6 sp 00000000ffd72828 error 6 in libflashplayer.so[f5e37000+b2c000] [67119.502824] npviewer.bin[2840]: segfault at f272f04c ip 00000000f61c6757 sp 00000000ff8f3f70 error 4 in libflashplayer.so[f5e27000+b2c000] [67356.418184] npviewer.bin[3750]: segfault at 418 ip 00000000f5fccdd6 sp 00000000ff93c008 error 6 in libflashplayer.so[f5d7e000+b2c000] [67362.767750] npviewer.bin[4287]: segfault at 418 ip 00000000f5ff5dd6 sp 00000000ffa88f18 error 6 in libflashplayer.so[f5da7000+b2c000] [67374.795124] npviewer.bin[4337]: segfault at 418 ip 00000000f5ffbdd6 sp 00000000ffe20858 error 6 in libflashplayer.so[f5dad000+b2c000] [67507.695185] npviewer.bin[4490]: segfault at ec93d054 ip 00000000f615a733 sp 00000000fffaba80 error 4 in libflashplayer.so[f5dbb000+b2c000] [67574.056830] npviewer.bin[4804]: segfault at 418 ip 00000000f6001dd6 sp 00000000fff9ee58 error 6 in libflashplayer.so[f5db3000+b2c000] [67631.414289] npviewer.bin[4969]: segfault at e8bde1e8 ip 00000000f61a615f sp 00000000ffae45e0 error 4 in libflashplayer.so[f5d5a000+b2c000] [68003.894533] npviewer.bin[5108]: segfault at e945e04c ip 00000000f6114757 sp 00000000ffb1c440 error 4 in libflashplayer.so[f5d75000+b2c000] [68048.329575] npviewer.bin[5683]: segfault at 0 ip 00000000f61db741 sp 00000000ffa9e110 error 4 in libflashplayer.so[f5e3c000+b2c000] [68053.343371] npviewer.bin[5803]: segfault at 0 ip 00000000f6173741 sp 00000000ff813e40 error 4 in libflashplayer.so[f5dd4000+b2c000] [68101.245565] npviewer.bin[5823]: segfault at 0 ip 00000000f619d741 sp 00000000ffbbd5d0 error 4 in libflashplayer.so[f5dfe000+b2c000] [68146.489477] lo: Disabled Privacy Extensions [68660.048857] npviewer.bin[6533]: segfault at 0 ip 00000000f6109741 sp 00000000ffde55e0 error 4 in libflashplayer.so[f5d6a000+b2c000] [69052.483477] npviewer.bin[6820]: segfault at f1da704c ip 00000000f618d757 sp 00000000ffe2a1e0 error 4 in libflashplayer.so[f5dee000+b2c000] [70961.658216] usb 2-4: reset high speed USB device using ehci_hcd and address 3