[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-17-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009 (Ubuntu 2.6.31-17.54-generic) [ 0.000000] Command line: root=UUID=1ffd02bf-b399-4901-9eb6-8af21bae03a1 ro xforcevesa quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7f90000 (usable) [ 0.000000] BIOS-e820: 00000000b7f9e000 - 00000000b7fa0000 (usable) [ 0.000000] BIOS-e820: 00000000b7fa0000 - 00000000b7fae000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b7fae000 - 00000000b8000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000448000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x448000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back [ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000B0000000 mask FFFFF8000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000448000000 aka 17536M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xb7fa0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000b7f90000 (usable) [ 0.000000] modified: 00000000b7f9e000 - 00000000b7fa0000 (usable) [ 0.000000] modified: 00000000b7fa0000 - 00000000b7fae000 (ACPI data) [ 0.000000] modified: 00000000b7fae000 - 00000000b8000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000448000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000b7fa0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00b7e00000 page 2M [ 0.000000] 00b7e00000 - 00b7fa0000 page 4k [ 0.000000] kernel direct mapping tables up to b7fa0000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000448000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0440000000 page 1G [ 0.000000] 0440000000 - 0448000000 page 2M [ 0.000000] kernel direct mapping tables up to 448000000 @ 12000-14000 [ 0.000000] RAMDISK: 3786c000 - 37fef5aa [ 0.000000] ACPI: RSDP 00000000000fa410 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000b7fa0000 0004C (v01 060809 RSDT1600 20090608 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000b7fa0200 00084 (v02 060809 FACP1600 20090608 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000b7fa04a0 070E7 (v01 1HDA3 1HDA3014 00000014 INTL 20051117) [ 0.000000] ACPI: FACS 00000000b7fae000 00040 [ 0.000000] ACPI: APIC 00000000b7fa0390 000CC (v01 060809 APIC1600 20090608 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000b7fa0460 0003C (v01 060809 OEMMCFG 20090608 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000b7fae040 000A6 (v01 060809 OEMB1600 20090608 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000b7fa7590 00150 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000b7fa76e0 00038 (v01 060809 OEMHPET0 20090608 MSFT 00000097) [ 0.000000] ACPI: EINJ 00000000b7fa7720 00130 (v01 AMIER AMI_EINJ 20090608 MSFT 00000097) [ 0.000000] ACPI: BERT 00000000b7fa78b0 00030 (v01 AMIER AMI_BERT 20090608 MSFT 00000097) [ 0.000000] ACPI: ERST 00000000b7fa78e0 001B0 (v01 AMIER AMI_ERST 20090608 MSFT 00000097) [ 0.000000] ACPI: HEST 00000000b7fa7a90 000A8 (v01 AMIER AMI_HEST 20090608 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 4 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 5 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 6 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 7 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-b8000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-248000000 [ 0.000000] SRAT: Node 1 PXM 1 248000000-448000000 [ 0.000000] NUMA: Allocated memnodemap from 13000 - 1b940 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000248000000 [ 0.000000] NODE_DATA [000000000001b940 - 000000000002093f] [ 0.000000] bootmap [0000000000021000 - 0000000000069fff] pages 49 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0248000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e4ccc] TEXT DATA BSS ==> [0001000000 - 00019e4ccc] [ 0.000000] #3 [003786c000 - 0037fef5aa] RAMDISK ==> [003786c000 - 0037fef5aa] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [00019e5000 - 00019e5161] BRK ==> [00019e5000 - 00019e5161] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] #8 [0000013000 - 000001b940] MEMNODEMAP ==> [0000013000 - 000001b940] [ 0.000000] Bootmem setup node 1 0000000248000000-0000000448000000 [ 0.000000] NODE_DATA [0000000248000000 - 0000000248004fff] [ 0.000000] bootmap [0000000248005000 - 0000000248044fff] pages 40 [ 0.000000] (9 early reservations) ==> bootmem [0248000000 - 0448000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0001000000 - 00019e4ccc] TEXT DATA BSS [ 0.000000] #3 [003786c000 - 0037fef5aa] RAMDISK [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved [ 0.000000] #5 [00019e5000 - 00019e5161] BRK [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE [ 0.000000] #8 [0000013000 - 000001b940] MEMNODEMAP [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0007fc0000-ffffea0007ffffff] potential offnode page_structs [ 0.000000] [ffffea0000000000-ffffea0007ffffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 [ 0.000000] [ffffea0008000000-ffffea000effffff] PMD -> [ffff880248200000-ffff88024f1fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00448000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000b7f90 [ 0.000000] 0: 0x000b7f9e -> 0x000b7fa0 [ 0.000000] 0: 0x00100000 -> 0x00248000 [ 0.000000] 1: 0x00248000 -> 0x00448000 [ 0.000000] On node 0 totalpages: 2096928 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 111 pages reserved [ 0.000000] DMA zone: 3815 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 735178 pages, LIFO batch:31 [ 0.000000] Normal zone: 18368 pages used for memmap [ 0.000000] Normal zone: 1325120 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2068480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xbffff000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xbffff000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 12 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b7f90000 - 00000000b7f9e000 [ 0.000000] PM: Registered nosave memory: 00000000b7fa0000 - 00000000b7fae000 [ 0.000000] PM: Registered nosave memory: 00000000b7fae000 - 00000000b8000000 [ 0.000000] PM: Registered nosave memory: 00000000b8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff700000 [ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:46c00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:12 nr_node_ids:2 [ 0.000000] PERCPU: Remapped at ffffc90000000000 with large pages, static data 90720 bytes [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4132593 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=1ffd02bf-b399-4901-9eb6-8af21bae03a1 ro xforcevesa quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 16459560k/17956864k available (5315k kernel code, 1180544k absent, 316760k reserved, 3017k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=2 [ 0.000000] NR_IRQS:4352 nr_irqs:912 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2400.404 MHz processor. [ 0.000013] spurious 8259A interrupt: IRQ7. [ 0.001401] Console: colour VGA+ 80x25 [ 0.001404] console [tty0] enabled [ 0.010000] allocated 167772160 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.80 BogoMIPS (lpj=24004010) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.010000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.011061] Mount-cache hash table entries: 256 [ 0.011200] Initializing cgroup subsys ns [ 0.011203] Initializing cgroup subsys cpuacct [ 0.011207] Initializing cgroup subsys memory [ 0.011217] Initializing cgroup subsys freezer [ 0.011219] Initializing cgroup subsys net_cls [ 0.011233] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.011235] CPU: L2 Cache: 512K (64 bytes/line) [ 0.011238] CPU 0/0x0 -> Node 0 [ 0.011241] tseg: 0000000000 [ 0.011254] CPU: Physical Processor ID: 0 [ 0.011256] CPU: Processor Core ID: 0 [ 0.011258] mce: CPU supports 6 MCE banks [ 0.011266] using C1E aware idle routine [ 0.011268] Performance Counters: AMD PMU driver. [ 0.011271] ... version: 0 [ 0.011272] ... bit width: 48 [ 0.011274] ... generic counters: 4 [ 0.011275] ... value mask: 0000ffffffffffff [ 0.011276] ... max period: 00007fffffffffff [ 0.011278] ... fixed-purpose counters: 0 [ 0.011279] ... counter mask: 000000000000000f [ 0.012693] ACPI: Core revision 20090521 [ 0.022770] Setting APIC routing to flat [ 0.023408] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.123442] CPU0: Quad-Core AMD Opteron(tm) Processor 2378 stepping 02 [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4800.24 BogoMIPS (lpj=24001231) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.280964] CPU1: Quad-Core AMD Opteron(tm) Processor 2378 stepping 02 [ 0.280971] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.290061] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.010000] Initializing CPU#2 [ 0.010000] Calibrating delay using timer specific routine.. 4800.22 BogoMIPS (lpj=24001140) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 2/0x2 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 2 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.450956] CPU2: Quad-Core AMD Opteron(tm) Processor 2378 stepping 02 [ 0.450963] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.460076] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.010000] Initializing CPU#3 [ 0.010000] Calibrating delay using timer specific routine.. 4800.23 BogoMIPS (lpj=24001170) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 3/0x3 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 3 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.621045] CPU3: Quad-Core AMD Opteron(tm) Processor 2378 stepping 02 [ 0.621051] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.630065] Booting processor 4 APIC 0x4 ip 0x6000 [ 0.010000] Initializing CPU#4 [ 0.010000] Calibrating delay using timer specific routine.. 4803.94 BogoMIPS (lpj=24019724) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 4/0x4 -> Node 1 [ 0.010000] CPU: Physical Processor ID: 1 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.791154] CPU4: Quad-Core AMD Opteron(tm) Processor 2378 stepping 02 [ 0.791161] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.800062] Booting processor 5 APIC 0x5 ip 0x6000 [ 0.010000] Initializing CPU#5 [ 0.010000] Calibrating delay using timer specific routine.. 4800.24 BogoMIPS (lpj=24001212) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 5/0x5 -> Node 1 [ 0.010000] CPU: Physical Processor ID: 1 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.961194] CPU5: Quad-Core AMD Opteron(tm) Processor 2378 stepping 02 [ 0.961201] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.970065] Booting processor 6 APIC 0x6 ip 0x6000 [ 0.010000] Initializing CPU#6 [ 0.010000] Calibrating delay using timer specific routine.. 4800.28 BogoMIPS (lpj=24001436) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 6/0x6 -> Node 1 [ 0.010000] CPU: Physical Processor ID: 1 [ 0.010000] CPU: Processor Core ID: 2 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 1.131172] CPU6: Quad-Core AMD Opteron(tm) Processor 2378 stepping 02 [ 1.131179] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 1.140078] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.010000] Initializing CPU#7 [ 0.010000] Calibrating delay using timer specific routine.. 4800.25 BogoMIPS (lpj=24001296) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 7/0x7 -> Node 1 [ 0.010000] CPU: Physical Processor ID: 1 [ 0.010000] CPU: Processor Core ID: 3 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 1.301158] CPU7: Quad-Core AMD Opteron(tm) Processor 2378 stepping 02 [ 1.301165] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 1.310025] Brought up 8 CPUs [ 1.310027] Total of 8 processors activated (38406.24 BogoMIPS). [ 1.310147] CPU0 attaching sched-domain: [ 1.310150] domain 0: span 0-3 level MC [ 1.310152] groups: 0 1 2 3 [ 1.310156] domain 1: span 0-7 level NODE [ 1.310158] groups: 0-3 4-7 [ 1.310162] CPU1 attaching sched-domain: [ 1.310163] domain 0: span 0-3 level MC [ 1.310165] groups: 1 2 3 0 [ 1.310168] domain 1: span 0-7 level NODE [ 1.310169] groups: 0-3 4-7 [ 1.310173] CPU2 attaching sched-domain: [ 1.310174] domain 0: span 0-3 level MC [ 1.310176] groups: 2 3 0 1 [ 1.310179] domain 1: span 0-7 level NODE [ 1.310180] groups: 0-3 4-7 [ 1.310183] CPU3 attaching sched-domain: [ 1.310185] domain 0: span 0-3 level MC [ 1.310186] groups: 3 0 1 2 [ 1.310189] domain 1: span 0-7 level NODE [ 1.310191] groups: 0-3 4-7 [ 1.310194] CPU4 attaching sched-domain: [ 1.310195] domain 0: span 4-7 level MC [ 1.310197] groups: 4 5 6 7 [ 1.310199] domain 1: span 0-7 level NODE [ 1.310201] groups: 4-7 0-3 [ 1.310204] CPU5 attaching sched-domain: [ 1.310205] domain 0: span 4-7 level MC [ 1.310207] groups: 5 6 7 4 [ 1.310210] domain 1: span 0-7 level NODE [ 1.310211] groups: 4-7 0-3 [ 1.310214] CPU6 attaching sched-domain: [ 1.310216] domain 0: span 4-7 level MC [ 1.310217] groups: 6 7 4 5 [ 1.310220] domain 1: span 0-7 level NODE [ 1.310222] groups: 4-7 0-3 [ 1.310225] CPU7 attaching sched-domain: [ 1.310226] domain 0: span 4-7 level MC [ 1.310228] groups: 7 4 5 6 [ 1.310231] domain 1: span 0-7 level NODE [ 1.310232] groups: 4-7 0-3 [ 1.310411] Booting paravirtualized kernel on bare hardware [ 1.310411] regulator: core version 0.5 [ 1.310411] Time: 16:42:17 Date: 01/29/10 [ 1.310411] NET: Registered protocol family 16 [ 1.310411] node 0 link 0: io port [9000, dfff] [ 1.310411] node 0 link 2: io port [e000, efff] [ 1.310411] node 0 link 0: io port [2000, 2fff] [ 1.310411] node 0 link 2: io port [3000, 3fff] [ 1.310411] TOM: 00000000b8000000 aka 2944M [ 1.310411] Fam 10h mmconf [e0000000, efffffff] [ 1.310411] node 0 link 0: mmio [c0000000, dfffffff] [ 1.310411] node 0 link 2: mmio [bf000000, bfffffff] [ 1.310411] node 0 link 0: mmio [e0000000, e7ffffff] ==> none [ 1.310411] node 0 link 2: mmio [e8000000, efffffff] ==> none [ 1.310411] node 0 link 0: mmio [a0000, bffff] [ 1.310411] TOM2: 0000000448000000 aka 17536M [ 1.310411] bus: [00,07] on node 0 link 0 [ 1.310411] bus: 00 index 0 io port: [4000, dfff] [ 1.310411] bus: 00 index 1 io port: [0, 2fff] [ 1.310411] bus: 00 index 2 io port: [f000, ffff] [ 1.310411] bus: 00 index 3 mmio: [c0000000, dfffffff] [ 1.310411] bus: 00 index 4 mmio: [a0000, bffff] [ 1.310411] bus: 00 index 5 mmio: [b8000000, beffffff] [ 1.310411] bus: 00 index 6 mmio: [f0000000, ffffffff] [ 1.310411] bus: 00 index 7 mmio: [448000000, fcffffffff] [ 1.310411] bus: [80,86] on node 0 link 2 [ 1.310411] bus: 80 index 0 io port: [e000, efff] [ 1.310411] bus: 80 index 1 io port: [3000, 3fff] [ 1.310411] bus: 80 index 2 mmio: [bf000000, bfffffff] [ 1.310411] ACPI: bus type pci registered [ 1.310412] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 1.310414] PCI: Not using MMCONFIG. [ 1.310416] PCI: Using configuration type 1 for base access [ 1.310417] PCI: Using configuration type 1 for extended access [ 1.311043] bio: create slab at 0 [ 1.311043] ACPI: EC: Look up EC in DSDT [ 1.327840] ACPI: Interpreter enabled [ 1.327843] ACPI: (supports S0 S1 S3 S4 S5) [ 1.327861] ACPI: Using IOAPIC for interrupt routing [ 1.327910] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 1.334318] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 1.342724] PCI: Using MMCONFIG at e0000000 - efffffff [ 1.354406] ACPI: No dock devices found. [ 1.354622] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.354796] pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2f7f] [ 1.354831] pci 0000:00:01.1: reg 10 io port: [0xbc00-0xbc3f] [ 1.354842] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f] [ 1.354845] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f] [ 1.354865] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 1.354870] pci 0000:00:01.1: PME# disabled [ 1.354893] pci 0000:00:02.0: reg 10 32bit mmio: [0xdbffb000-0xdbffbfff] [ 1.354912] pci 0000:00:02.0: supports D1 D2 [ 1.354914] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.354916] pci 0000:00:02.0: PME# disabled [ 1.354933] pci 0000:00:02.1: reg 10 32bit mmio: [0xdbffac00-0xdbffacff] [ 1.354952] pci 0000:00:02.1: supports D1 D2 [ 1.354954] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.354957] pci 0000:00:02.1: PME# disabled [ 1.354981] pci 0000:00:05.0: reg 10 io port: [0xb480-0xb487] [ 1.354984] pci 0000:00:05.0: reg 14 io port: [0xb400-0xb403] [ 1.354987] pci 0000:00:05.0: reg 18 io port: [0xb080-0xb087] [ 1.354991] pci 0000:00:05.0: reg 1c io port: [0xb000-0xb003] [ 1.354994] pci 0000:00:05.0: reg 20 io port: [0xac00-0xac0f] [ 1.354997] pci 0000:00:05.0: reg 24 32bit mmio: [0xdbff9000-0xdbff9fff] [ 1.355026] pci 0000:00:05.1: reg 10 io port: [0xa880-0xa887] [ 1.355029] pci 0000:00:05.1: reg 14 io port: [0xa800-0xa803] [ 1.355032] pci 0000:00:05.1: reg 18 io port: [0xa480-0xa487] [ 1.355035] pci 0000:00:05.1: reg 1c io port: [0xa400-0xa403] [ 1.355038] pci 0000:00:05.1: reg 20 io port: [0xa080-0xa08f] [ 1.355042] pci 0000:00:05.1: reg 24 32bit mmio: [0xdbff8000-0xdbff8fff] [ 1.355070] pci 0000:00:05.2: reg 10 io port: [0xa000-0xa007] [ 1.355073] pci 0000:00:05.2: reg 14 io port: [0x9c00-0x9c03] [ 1.355077] pci 0000:00:05.2: reg 18 io port: [0x9880-0x9887] [ 1.355080] pci 0000:00:05.2: reg 1c io port: [0x9800-0x9803] [ 1.355083] pci 0000:00:05.2: reg 20 io port: [0x9480-0x948f] [ 1.355086] pci 0000:00:05.2: reg 24 32bit mmio: [0xdbff7000-0xdbff7fff] [ 1.355152] pci 0000:00:08.0: reg 10 32bit mmio: [0xdbff6000-0xdbff6fff] [ 1.355155] pci 0000:00:08.0: reg 14 io port: [0x9400-0x9407] [ 1.355158] pci 0000:00:08.0: reg 18 32bit mmio: [0xdbffa800-0xdbffa8ff] [ 1.355162] pci 0000:00:08.0: reg 1c 32bit mmio: [0xdbffa400-0xdbffa40f] [ 1.355181] pci 0000:00:08.0: supports D1 D2 [ 1.355183] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.355187] pci 0000:00:08.0: PME# disabled [ 1.355213] pci 0000:00:09.0: reg 10 32bit mmio: [0xdbff5000-0xdbff5fff] [ 1.355217] pci 0000:00:09.0: reg 14 io port: [0x9080-0x9087] [ 1.355220] pci 0000:00:09.0: reg 18 32bit mmio: [0xdbffa000-0xdbffa0ff] [ 1.355223] pci 0000:00:09.0: reg 1c 32bit mmio: [0xdbff4c00-0xdbff4c0f] [ 1.355243] pci 0000:00:09.0: supports D1 D2 [ 1.355244] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.355248] pci 0000:00:09.0: PME# disabled [ 1.355278] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.355280] pci 0000:00:0a.0: PME# disabled [ 1.355308] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.355310] pci 0000:00:0b.0: PME# disabled [ 1.355338] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.355340] pci 0000:00:0c.0: PME# disabled [ 1.355368] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.355370] pci 0000:00:0d.0: PME# disabled [ 1.355397] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.355399] pci 0000:00:0e.0: PME# disabled [ 1.355427] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.355429] pci 0000:00:0f.0: PME# disabled [ 1.355569] PCI: peer root bus 00 res updated from pci conf [ 1.355590] pci 0000:01:01.0: reg 10 io port: [0xcc00-0xcc1f] [ 1.355615] pci 0000:01:01.0: supports D1 D2 [ 1.355641] pci 0000:00:06.0: transparent bridge [ 1.355644] pci 0000:00:06.0: bridge io port: [0xc000-0xcfff] [ 1.355818] pci 0000:07:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff] [ 1.355825] pci 0000:07:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 1.355832] pci 0000:07:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff] [ 1.355836] pci 0000:07:00.0: reg 24 io port: [0xdc00-0xdc7f] [ 1.355841] pci 0000:07:00.0: reg 30 32bit mmio: [0xdefe0000-0xdeffffff] [ 1.355889] pci 0000:00:0f.0: bridge io port: [0xd000-0xdfff] [ 1.355891] pci 0000:00:0f.0: bridge 32bit mmio: [0xdc000000-0xdfffffff] [ 1.355894] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 1.355907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.356110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.356175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 1.356229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 1.356283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 1.356336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 1.356389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 1.356442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT] [ 1.366170] ACPI: PCI Root Bridge [PCIB] (0000:80) [ 1.366332] pci 0000:80:01.0: reg 10 io port: [0x3c00-0x3c7f] [ 1.366336] pci 0000:80:01.0: reg 14 32bit mmio: [0xbffff000-0xbfffffff] [ 1.366367] pci 0000:80:01.1: reg 10 io port: [0xe880-0xe8bf] [ 1.366377] pci 0000:80:01.1: reg 20 io port: [0xe800-0xe83f] [ 1.366381] pci 0000:80:01.1: reg 24 io port: [0xe480-0xe4bf] [ 1.366399] pci 0000:80:01.1: PME# supported from D3hot D3cold [ 1.366404] pci 0000:80:01.1: PME# disabled [ 1.366443] pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.366445] pci 0000:80:0a.0: PME# disabled [ 1.366472] pci 0000:80:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.366474] pci 0000:80:0b.0: PME# disabled [ 1.366500] pci 0000:80:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.366502] pci 0000:80:0c.0: PME# disabled [ 1.366528] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.366530] pci 0000:80:0d.0: PME# disabled [ 1.366556] pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.366558] pci 0000:80:0e.0: PME# disabled [ 1.366584] pci 0000:80:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.366586] pci 0000:80:0f.0: PME# disabled [ 1.366606] PCI: peer root bus 80 res updated from pci conf [ 1.366822] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT] [ 1.366996] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR20._PRT] [ 1.367050] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR21._PRT] [ 1.367104] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR22._PRT] [ 1.367157] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR23._PRT] [ 1.367210] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR24._PRT] [ 1.367263] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR25._PRT] [ 1.368162] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *14 [ 1.368366] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 1.368568] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 1.368768] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 1.368969] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 1.369170] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 1.369370] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 1.369570] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 1.369772] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 1.369974] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *11 [ 1.370194] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *14 [ 1.370394] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 1.370594] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. [ 1.370795] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5 [ 1.370995] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11 [ 1.371197] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 1.371427] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5 [ 1.371666] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 1.371873] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *14 [ 1.372075] ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled. [ 1.372276] ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled. [ 1.372477] ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled. [ 1.372677] ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled. [ 1.372876] ACPI: PCI Interrupt Link [LE3A] (IRQs 40 41 42 43) *0, disabled. [ 1.373077] ACPI: PCI Interrupt Link [LE3B] (IRQs 40 41 42 43) *0, disabled. [ 1.373277] ACPI: PCI Interrupt Link [LE3C] (IRQs 40 41 42 43) *0, disabled. [ 1.373478] ACPI: PCI Interrupt Link [LE3D] (IRQs 40 41 42 43) *0, disabled. [ 1.373678] ACPI: PCI Interrupt Link [IIM0] (IRQs 44 45 46 47) *0, disabled. [ 1.373878] ACPI: PCI Interrupt Link [IIM1] (IRQs 44 45 46 47) *0, disabled. [ 1.374079] ACPI: PCI Interrupt Link [ISI0] (IRQs 44 45 46 47) *0, disabled. [ 1.374279] ACPI: PCI Interrupt Link [ISI1] (IRQs 44 45 46 47) *0, disabled. [ 1.374478] ACPI: PCI Interrupt Link [ISI2] (IRQs 44 45 46 47) *0, disabled. [ 1.374679] ACPI: PCI Interrupt Link [ILSM] (IRQs 44 45 46 47) *0, disabled. [ 1.374879] ACPI: PCI Interrupt Link [ILPM] (IRQs 44 45 46 47) *0, disabled. [ 1.375012] SCSI subsystem initialized [ 1.375036] libata version 3.00 loaded. [ 1.375036] usbcore: registered new interface driver usbfs [ 1.375036] usbcore: registered new interface driver hub [ 1.375036] usbcore: registered new device driver usb [ 1.375036] ACPI: WMI: Mapper loaded [ 1.375036] PCI: Using ACPI for IRQ routing [ 1.400018] Bluetooth: Core ver 2.15 [ 1.400040] NET: Registered protocol family 31 [ 1.400040] Bluetooth: HCI device and connection manager initialized [ 1.400040] Bluetooth: HCI socket layer initialized [ 1.400040] NetLabel: Initializing [ 1.400040] NetLabel: domain hash size = 128 [ 1.400040] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.400040] NetLabel: unlabeled traffic allowed by default [ 1.400227] PCI-DMA: Disabling AGP. [ 1.400382] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 1.400383] PCI-DMA: using GART IOMMU. [ 1.400386] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.403146] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 1.403152] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 1.450013] Switched to high resolution mode on CPU 0 [ 1.451002] Switched to high resolution mode on CPU 2 [ 1.451006] Switched to high resolution mode on CPU 1 [ 1.451081] Switched to high resolution mode on CPU 3 [ 1.451238] Switched to high resolution mode on CPU 4 [ 1.451247] Switched to high resolution mode on CPU 7 [ 1.451257] Switched to high resolution mode on CPU 6 [ 1.451265] Switched to high resolution mode on CPU 5 [ 1.470043] pnp: PnP ACPI init [ 1.470064] ACPI: bus type pnp registered [ 1.476907] pnp: PnP ACPI: found 17 devices [ 1.476909] ACPI: ACPI bus type pnp unregistered [ 1.476920] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 1.476922] system 00:07: ioport range 0x800-0x80f has been reserved [ 1.476925] system 00:07: ioport range 0x2000-0x207f has been reserved [ 1.476927] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 1.476929] system 00:07: ioport range 0x2400-0x247f has been reserved [ 1.476931] system 00:07: ioport range 0x2480-0x24ff has been reserved [ 1.476933] system 00:07: ioport range 0x2800-0x287f has been reserved [ 1.476935] system 00:07: ioport range 0x2880-0x28ff has been reserved [ 1.476938] system 00:07: ioport range 0x2c00-0x2c7f has been reserved [ 1.476940] system 00:07: ioport range 0x2c80-0x2cff has been reserved [ 1.476943] system 00:07: iomem range 0xdbf80000-0xdbfbffff has been reserved [ 1.476946] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved [ 1.476950] system 00:08: ioport range 0x3000-0x307f has been reserved [ 1.476954] system 00:08: ioport range 0x3080-0x30ff has been reserved [ 1.476956] system 00:08: ioport range 0x3400-0x347f has been reserved [ 1.476959] system 00:08: ioport range 0x3480-0x34ff has been reserved [ 1.476961] system 00:08: ioport range 0x3800-0x387f has been reserved [ 1.476963] system 00:08: ioport range 0x3880-0x38ff has been reserved [ 1.476965] system 00:08: iomem range 0xfee01000-0xfef00fff could not be reserved [ 1.476969] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.476972] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.476976] system 00:0d: ioport range 0x680-0x6ff has been reserved [ 1.476978] system 00:0d: ioport range 0x295-0x296 has been reserved [ 1.476980] system 00:0d: ioport range 0xb78-0xb7f has been reserved [ 1.476982] system 00:0d: ioport range 0xf78-0xf7f has been reserved [ 1.476986] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved [ 1.476990] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 1.476992] system 00:0f: iomem range 0xc0000-0xcffff has been reserved [ 1.476994] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 1.476996] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved [ 1.476999] system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved [ 1.481657] AppArmor: AppArmor Filesystem Enabled [ 1.481706] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 1.481708] pci 0000:00:06.0: IO window: 0xc000-0xcfff [ 1.481715] pci 0000:00:06.0: MEM window: disabled [ 1.481717] pci 0000:00:06.0: PREFETCH window: disabled [ 1.481720] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 1.481721] pci 0000:00:0a.0: IO window: disabled [ 1.481724] pci 0000:00:0a.0: MEM window: disabled [ 1.481726] pci 0000:00:0a.0: PREFETCH window: disabled [ 1.481728] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 1.481729] pci 0000:00:0b.0: IO window: disabled [ 1.481732] pci 0000:00:0b.0: MEM window: disabled [ 1.481733] pci 0000:00:0b.0: PREFETCH window: disabled [ 1.481736] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 1.481737] pci 0000:00:0c.0: IO window: disabled [ 1.481739] pci 0000:00:0c.0: MEM window: disabled [ 1.481741] pci 0000:00:0c.0: PREFETCH window: disabled [ 1.481743] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05 [ 1.481745] pci 0000:00:0d.0: IO window: disabled [ 1.481747] pci 0000:00:0d.0: MEM window: disabled [ 1.481749] pci 0000:00:0d.0: PREFETCH window: disabled [ 1.481751] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06 [ 1.481753] pci 0000:00:0e.0: IO window: disabled [ 1.481755] pci 0000:00:0e.0: MEM window: disabled [ 1.481757] pci 0000:00:0e.0: PREFETCH window: disabled [ 1.481759] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07 [ 1.481761] pci 0000:00:0f.0: IO window: 0xd000-0xdfff [ 1.481764] pci 0000:00:0f.0: MEM window: 0xdc000000-0xdfffffff [ 1.481766] pci 0000:00:0f.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 1.481773] pci 0000:00:06.0: setting latency timer to 64 [ 1.481778] pci 0000:00:0a.0: setting latency timer to 64 [ 1.481781] pci 0000:00:0b.0: setting latency timer to 64 [ 1.481785] pci 0000:00:0c.0: setting latency timer to 64 [ 1.481789] pci 0000:00:0d.0: setting latency timer to 64 [ 1.481792] pci 0000:00:0e.0: setting latency timer to 64 [ 1.481796] pci 0000:00:0f.0: setting latency timer to 64 [ 1.481799] pci 0000:80:0a.0: PCI bridge, secondary bus 0000:81 [ 1.481801] pci 0000:80:0a.0: IO window: disabled [ 1.481803] pci 0000:80:0a.0: MEM window: disabled [ 1.481805] pci 0000:80:0a.0: PREFETCH window: disabled [ 1.481807] pci 0000:80:0b.0: PCI bridge, secondary bus 0000:82 [ 1.481808] pci 0000:80:0b.0: IO window: disabled [ 1.481811] pci 0000:80:0b.0: MEM window: disabled [ 1.481812] pci 0000:80:0b.0: PREFETCH window: disabled [ 1.481815] pci 0000:80:0c.0: PCI bridge, secondary bus 0000:83 [ 1.481816] pci 0000:80:0c.0: IO window: disabled [ 1.481818] pci 0000:80:0c.0: MEM window: disabled [ 1.481820] pci 0000:80:0c.0: PREFETCH window: disabled [ 1.481823] pci 0000:80:0d.0: PCI bridge, secondary bus 0000:84 [ 1.481824] pci 0000:80:0d.0: IO window: disabled [ 1.481826] pci 0000:80:0d.0: MEM window: disabled [ 1.481828] pci 0000:80:0d.0: PREFETCH window: disabled [ 1.481830] pci 0000:80:0e.0: PCI bridge, secondary bus 0000:85 [ 1.481832] pci 0000:80:0e.0: IO window: disabled [ 1.481834] pci 0000:80:0e.0: MEM window: disabled [ 1.481836] pci 0000:80:0e.0: PREFETCH window: disabled [ 1.481838] pci 0000:80:0f.0: PCI bridge, secondary bus 0000:86 [ 1.481839] pci 0000:80:0f.0: IO window: disabled [ 1.481842] pci 0000:80:0f.0: MEM window: disabled [ 1.481843] pci 0000:80:0f.0: PREFETCH window: disabled [ 1.481847] pci 0000:80:0a.0: setting latency timer to 64 [ 1.481851] pci 0000:80:0b.0: setting latency timer to 64 [ 1.481854] pci 0000:80:0c.0: setting latency timer to 64 [ 1.481858] pci 0000:80:0d.0: setting latency timer to 64 [ 1.481861] pci 0000:80:0e.0: setting latency timer to 64 [ 1.481865] pci 0000:80:0f.0: setting latency timer to 64 [ 1.481868] pci_bus 0000:00: resource 0 io: [0x4000-0xdfff] [ 1.481870] pci_bus 0000:00: resource 1 io: [0x00-0x2fff] [ 1.481872] pci_bus 0000:00: resource 2 io: [0xf000-0xffff] [ 1.481874] pci_bus 0000:00: resource 3 mem: [0xc0000000-0xdfffffff] [ 1.481876] pci_bus 0000:00: resource 4 mem: [0x0a0000-0x0bffff] [ 1.481878] pci_bus 0000:00: resource 5 mem: [0xb8000000-0xbeffffff] [ 1.481880] pci_bus 0000:00: resource 6 mem: [0xf0000000-0xffffffff] [ 1.481882] pci_bus 0000:00: resource 7 mem: [0x448000000-0xfcffffffff] [ 1.481884] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 1.481886] pci_bus 0000:01: resource 3 io: [0x4000-0xdfff] [ 1.481888] pci_bus 0000:01: resource 4 io: [0x00-0x2fff] [ 1.481890] pci_bus 0000:01: resource 5 io: [0xf000-0xffff] [ 1.481892] pci_bus 0000:01: resource 6 mem: [0xc0000000-0xdfffffff] [ 1.481894] pci_bus 0000:01: resource 7 mem: [0x0a0000-0x0bffff] [ 1.481896] pci_bus 0000:01: resource 8 mem: [0xb8000000-0xbeffffff] [ 1.481897] pci_bus 0000:01: resource 9 mem: [0xf0000000-0xffffffff] [ 1.481899] pci_bus 0000:01: resource 10 mem: [0x448000000-0xfcffffffff] [ 1.481902] pci_bus 0000:07: resource 0 io: [0xd000-0xdfff] [ 1.481904] pci_bus 0000:07: resource 1 mem: [0xdc000000-0xdfffffff] [ 1.481906] pci_bus 0000:07: resource 2 pref mem [0xc0000000-0xcfffffff] [ 1.481908] pci_bus 0000:80: resource 0 io: [0xe000-0xefff] [ 1.481910] pci_bus 0000:80: resource 1 io: [0x3000-0x3fff] [ 1.481912] pci_bus 0000:80: resource 2 mem: [0xbf000000-0xbfffffff] [ 1.481949] NET: Registered protocol family 2 [ 1.482300] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.484236] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.487529] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.487928] TCP: Hash tables configured (established 524288 bind 65536) [ 1.487930] TCP reno registered [ 1.488059] NET: Registered protocol family 1 [ 1.488115] Trying to unpack rootfs image as initramfs... [ 1.641512] Freeing initrd memory: 7693k freed [ 1.644612] Scanning for low memory corruption every 60 seconds [ 1.644750] audit: initializing netlink socket (disabled) [ 1.644763] type=2000 audit(1264783336.640:1): initialized [ 1.653278] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.654948] VFS: Disk quotas dquot_6.5.2 [ 1.654993] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.655523] fuse init (API version 7.12) [ 1.655584] msgmni has been set to 32162 [ 1.655977] alg: No test for stdrng (krng) [ 1.655989] io scheduler noop registered [ 1.655991] io scheduler anticipatory registered [ 1.655993] io scheduler deadline registered [ 1.656023] io scheduler cfq registered (default) [ 1.677970] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678013] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678055] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678099] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678150] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678207] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678267] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678330] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678398] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678469] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678544] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678623] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678648] pci 0000:07:00.0: Boot video device [ 1.678720] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.678765] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.678813] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.678865] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.678920] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.678979] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.679124] alloc irq_desc for 48 on node 0 [ 1.679126] alloc kstat_irqs on node 0 [ 1.679135] pcieport-driver 0000:00:0a.0: irq 48 for MSI/MSI-X [ 1.679140] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 1.679237] alloc irq_desc for 49 on node 0 [ 1.679239] alloc kstat_irqs on node 0 [ 1.679243] pcieport-driver 0000:00:0b.0: irq 49 for MSI/MSI-X [ 1.679246] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 1.679337] alloc irq_desc for 50 on node 0 [ 1.679338] alloc kstat_irqs on node 0 [ 1.679343] pcieport-driver 0000:00:0c.0: irq 50 for MSI/MSI-X [ 1.679347] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.679433] alloc irq_desc for 51 on node 0 [ 1.679435] alloc kstat_irqs on node 0 [ 1.679439] pcieport-driver 0000:00:0d.0: irq 51 for MSI/MSI-X [ 1.679442] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 1.679529] alloc irq_desc for 52 on node 0 [ 1.679531] alloc kstat_irqs on node 0 [ 1.679535] pcieport-driver 0000:00:0e.0: irq 52 for MSI/MSI-X [ 1.679539] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 1.679629] alloc irq_desc for 53 on node 0 [ 1.679630] alloc kstat_irqs on node 0 [ 1.679634] pcieport-driver 0000:00:0f.0: irq 53 for MSI/MSI-X [ 1.679638] pcieport-driver 0000:00:0f.0: setting latency timer to 64 [ 1.679724] alloc irq_desc for 54 on node 0 [ 1.679726] alloc kstat_irqs on node 0 [ 1.679731] pcieport-driver 0000:80:0a.0: irq 54 for MSI/MSI-X [ 1.679734] pcieport-driver 0000:80:0a.0: setting latency timer to 64 [ 1.679819] alloc irq_desc for 55 on node 0 [ 1.679821] alloc kstat_irqs on node 0 [ 1.679825] pcieport-driver 0000:80:0b.0: irq 55 for MSI/MSI-X [ 1.679828] pcieport-driver 0000:80:0b.0: setting latency timer to 64 [ 1.679913] alloc irq_desc for 56 on node 0 [ 1.679915] alloc kstat_irqs on node 0 [ 1.679919] pcieport-driver 0000:80:0c.0: irq 56 for MSI/MSI-X [ 1.679923] pcieport-driver 0000:80:0c.0: setting latency timer to 64 [ 1.680031] alloc irq_desc for 57 on node 0 [ 1.680032] alloc kstat_irqs on node 0 [ 1.680036] pcieport-driver 0000:80:0d.0: irq 57 for MSI/MSI-X [ 1.680039] pcieport-driver 0000:80:0d.0: setting latency timer to 64 [ 1.680126] alloc irq_desc for 58 on node 0 [ 1.680128] alloc kstat_irqs on node 0 [ 1.680132] pcieport-driver 0000:80:0e.0: irq 58 for MSI/MSI-X [ 1.680136] pcieport-driver 0000:80:0e.0: setting latency timer to 64 [ 1.680222] alloc irq_desc for 59 on node 0 [ 1.680224] alloc kstat_irqs on node 0 [ 1.680227] pcieport-driver 0000:80:0f.0: irq 59 for MSI/MSI-X [ 1.680231] pcieport-driver 0000:80:0f.0: setting latency timer to 64 [ 1.680295] aer 0000:00:0a.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680302] aer 0000:00:0b.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680306] aer 0000:00:0c.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680310] aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680314] aer 0000:00:0e.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680318] aer 0000:00:0f.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680324] aer 0000:80:0a.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680328] aer 0000:80:0b.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680332] aer 0000:80:0c.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680336] aer 0000:80:0d.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680340] aer 0000:80:0e.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680344] aer 0000:80:0f.0:pcie02: AER service couldn't init device: no _OSC support [ 1.680351] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.680371] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.680501] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.680504] ACPI: Power Button [PWRF] [ 1.680550] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.680557] ACPI: Power Button [PWRB] [ 1.680983] processor LNXCPU:00: registered as cooling_device0 [ 1.681013] processor LNXCPU:01: registered as cooling_device1 [ 1.681038] processor LNXCPU:02: registered as cooling_device2 [ 1.681065] processor LNXCPU:03: registered as cooling_device3 [ 1.681092] processor LNXCPU:04: registered as cooling_device4 [ 1.681119] processor LNXCPU:05: registered as cooling_device5 [ 1.681144] processor LNXCPU:06: registered as cooling_device6 [ 1.681172] processor LNXCPU:07: registered as cooling_device7 [ 1.686221] Linux agpgart interface v0.103 [ 1.686229] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.686321] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.686401] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.686563] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.686662] 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.687419] brd: module loaded [ 1.687734] loop: module loaded [ 1.687782] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.688031] sata_nv 0000:00:05.0: version 3.5 [ 1.688320] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 1.688325] alloc irq_desc for 23 on node 0 [ 1.688327] alloc kstat_irqs on node 0 [ 1.688336] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.688339] sata_nv 0000:00:05.0: Using SWNCQ mode [ 1.688412] sata_nv 0000:00:05.0: setting latency timer to 64 [ 1.688520] scsi0 : sata_nv [ 1.688590] scsi1 : sata_nv [ 1.688702] ata1: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 23 [ 1.688704] ata2: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 23 [ 1.689027] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 [ 1.689029] alloc irq_desc for 22 on node 0 [ 1.689030] alloc kstat_irqs on node 0 [ 1.689037] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22 [ 1.689039] sata_nv 0000:00:05.1: Using SWNCQ mode [ 1.689065] sata_nv 0000:00:05.1: setting latency timer to 64 [ 1.689169] scsi2 : sata_nv [ 1.689219] scsi3 : sata_nv [ 1.689329] ata3: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa080 irq 22 [ 1.689331] ata4: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0xa088 irq 22 [ 1.689664] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21 [ 1.689666] alloc irq_desc for 21 on node 0 [ 1.689667] alloc kstat_irqs on node 0 [ 1.689675] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21 [ 1.689677] sata_nv 0000:00:05.2: Using SWNCQ mode [ 1.689702] sata_nv 0000:00:05.2: setting latency timer to 64 [ 1.689795] scsi4 : sata_nv [ 1.689845] scsi5 : sata_nv [ 1.689967] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 21 [ 1.689970] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 21 [ 1.690594] Fixed MDIO Bus: probed [ 1.690617] PPP generic driver version 2.4.2 [ 1.690680] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.690982] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20 [ 1.690986] alloc irq_desc for 20 on node 0 [ 1.690989] alloc kstat_irqs on node 0 [ 1.690999] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20 [ 1.691008] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.691011] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.691046] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.691068] ehci_hcd 0000:00:02.1: debug port 1 [ 1.691071] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.691085] ehci_hcd 0000:00:02.1: irq 20, io mem 0xdbffac00 [ 1.710022] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.710092] usb usb1: configuration #1 chosen from 1 choice [ 1.710117] hub 1-0:1.0: USB hub found [ 1.710123] hub 1-0:1.0: 10 ports detected [ 1.710181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.710531] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 1.710535] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 1.710545] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.710548] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.710576] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 1.710587] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdbffb000 [ 1.772089] usb usb2: configuration #1 chosen from 1 choice [ 1.772111] hub 2-0:1.0: USB hub found [ 1.772119] hub 2-0:1.0: 10 ports detected [ 1.772175] uhci_hcd: USB Universal Host Controller Interface driver [ 1.772247] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.772249] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.772570] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.772628] mice: PS/2 mouse device common for all mice [ 1.772702] rtc_cmos 00:0a: RTC can wake from S4 [ 1.772727] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 [ 1.772759] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.772846] device-mapper: uevent: version 1.0.3 [ 1.772938] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.773165] device-mapper: multipath: version 1.1.0 loaded [ 1.773167] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.773546] cpuidle: using governor ladder [ 1.773547] cpuidle: using governor menu [ 1.773882] TCP cubic registered [ 1.773992] NET: Registered protocol family 10 [ 1.774454] lo: Disabled Privacy Extensions [ 1.774676] NET: Registered protocol family 17 [ 1.774689] Bluetooth: L2CAP ver 2.13 [ 1.774691] Bluetooth: L2CAP socket layer initialized [ 1.774693] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.774695] Bluetooth: SCO socket layer initialized [ 1.774766] Bluetooth: RFCOMM TTY layer initialized [ 1.774768] Bluetooth: RFCOMM socket layer initialized [ 1.774770] Bluetooth: RFCOMM ver 1.11 [ 1.774855] powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2378 processors (8 cpu cores) (version 2.20.00) [ 1.774861] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 1.774862] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 1.774939] PM: Resume from disk failed. [ 1.774947] registered taskstats version 1 [ 1.775109] Magic number: 10:529:743 [ 1.775200] rtc_cmos 00:0a: setting system clock to 2010-01-29 16:42:17 UTC (1264783337) [ 1.775203] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.775204] EDD information not available. [ 1.791641] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.020389] ata3: SATA link down (SStatus 0 SControl 300) [ 2.032543] ata5: SATA link down (SStatus 0 SControl 300) [ 2.090034] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 2.170048] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.190720] ata1.00: ATA-8: WDC WD3000HLFS-01G6U0, 04.04V01, max UDMA/133 [ 2.190723] ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.233759] ata1.00: configured for UDMA/133 [ 2.233899] scsi 0:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5 [ 2.234026] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.234070] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 2.234100] sd 0:0:0:0: [sda] Write Protect is off [ 2.234102] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.234117] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.234215] sda: sda1 sda2 < sda5 [ 2.244957] usb 1-6: configuration #1 chosen from 1 choice [ 2.252476] sda6 sda7 > [ 2.258862] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.580028] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 2.720047] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.740352] ata2.00: ATA-8: ST31000528AS, CC35, max UDMA/133 [ 2.740355] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.783251] ata2.00: configured for UDMA/133 [ 2.783334] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC35 PQ: 0 ANSI: 5 [ 2.783428] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.783438] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.783476] sd 1:0:0:0: [sdb] Write Protect is off [ 2.783478] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.783491] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.783581] sdb: sdb1 [ 2.787671] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.810975] usb 2-2: configuration #1 chosen from 1 choice [ 3.120455] ata4: SATA link down (SStatus 0 SControl 300) [ 3.610036] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.630149] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223L, SB01, max UDMA/100 [ 3.670163] ata6.00: configured for UDMA/100 [ 3.671112] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223L SB01 PQ: 0 ANSI: 5 [ 3.675628] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.675631] Uniform CD-ROM driver Revision: 3.20 [ 3.675696] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.675727] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 3.675760] Freeing unused kernel memory: 660k freed [ 3.675946] Write protecting the kernel read-only data: 7584k [ 3.768202] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 3.768585] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 3.768591] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 3.768596] forcedeth 0000:00:08.0: setting latency timer to 64 [ 3.768664] nv_probe: set workaround bit for reversed mac addr [ 3.776370] Initializing USB Mass Storage driver... [ 3.776936] scsi6 : SCSI emulation for USB Mass Storage devices [ 3.778168] usbcore: registered new interface driver usb-storage [ 3.778172] USB Mass Storage support registered. [ 3.781966] usb-storage: device found at 3 [ 3.781968] usb-storage: waiting for device to settle before scanning [ 3.782032] usbcore: registered new interface driver hiddev [ 3.787991] input: Microsoft Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4 [ 3.788054] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse ] on usb-0000:00:02.0-2/input0 [ 3.788073] usbcore: registered new interface driver usbhid [ 3.788076] usbhid: v2.6:USB HID core driver [ 4.310748] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 2, addr 00:30:48:bb:e7:34 [ 4.310752] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 4.311179] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 21 [ 4.311183] forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 21 (level, low) -> IRQ 21 [ 4.311187] forcedeth 0000:00:09.0: setting latency timer to 64 [ 4.311270] nv_probe: set workaround bit for reversed mac addr [ 4.850726] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 3, addr 00:30:48:bb:e7:35 [ 4.850729] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 5.776197] PM: Starting manual resume from disk [ 5.776200] PM: Resume from partition 8:5 [ 5.776202] PM: Checking hibernation image. [ 5.776312] PM: Resume from disk failed. [ 5.778452] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.778455] EXT3-fs: write access will be enabled during recovery. [ 7.121065] kjournald starting. Commit interval 5 seconds [ 7.121084] EXT3-fs: sda6: orphan cleanup on readonly fs [ 7.121092] ext3_orphan_cleanup: deleting unreferenced inode 245546 [ 7.122042] ext3_orphan_cleanup: deleting unreferenced inode 245547 [ 7.127076] ext3_orphan_cleanup: deleting unreferenced inode 245370 [ 7.127097] ext3_orphan_cleanup: deleting unreferenced inode 245369 [ 7.127103] ext3_orphan_cleanup: deleting unreferenced inode 1080543 [ 7.127109] ext3_orphan_cleanup: deleting unreferenced inode 1080214 [ 7.127115] ext3_orphan_cleanup: deleting unreferenced inode 1079987 [ 7.127119] ext3_orphan_cleanup: deleting unreferenced inode 1079922 [ 7.127128] ext3_orphan_cleanup: deleting unreferenced inode 1079919 [ 7.127133] ext3_orphan_cleanup: deleting unreferenced inode 1079918 [ 7.127141] ext3_orphan_cleanup: deleting unreferenced inode 1079792 [ 7.127147] ext3_orphan_cleanup: deleting unreferenced inode 1079763 [ 7.127152] ext3_orphan_cleanup: deleting unreferenced inode 1079743 [ 7.127158] ext3_orphan_cleanup: deleting unreferenced inode 1079704 [ 7.127163] ext3_orphan_cleanup: deleting unreferenced inode 245347 [ 7.127169] ext3_orphan_cleanup: deleting unreferenced inode 245289 [ 7.127173] ext3_orphan_cleanup: deleting unreferenced inode 245288 [ 7.127177] ext3_orphan_cleanup: deleting unreferenced inode 245287 [ 7.127181] ext3_orphan_cleanup: deleting unreferenced inode 245286 [ 7.127185] ext3_orphan_cleanup: deleting unreferenced inode 245284 [ 7.127189] EXT3-fs: sda6: 20 orphan inodes deleted [ 7.127191] EXT3-fs: recovery complete. [ 7.151029] EXT3-fs: mounted filesystem with writeback data mode. [ 7.645025] type=1505 audit(1264783343.367:2): operation="profile_load" pid=488 name=/usr/share/gdm/guest-session/Xsession [ 7.659921] type=1505 audit(1264783343.376:3): operation="profile_load" pid=489 name=/sbin/dhclient3 [ 7.660159] type=1505 audit(1264783343.376:4): operation="profile_load" pid=489 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 7.660294] type=1505 audit(1264783343.376:5): operation="profile_load" pid=489 name=/usr/lib/connman/scripts/dhclient-script [ 7.674503] type=1505 audit(1264783343.397:6): operation="profile_load" pid=490 name=/usr/bin/evince [ 7.678336] type=1505 audit(1264783343.397:7): operation="profile_load" pid=490 name=/usr/bin/evince-previewer [ 7.680665] type=1505 audit(1264783343.397:8): operation="profile_load" pid=490 name=/usr/bin/evince-thumbnailer [ 7.697112] type=1505 audit(1264783343.417:9): operation="profile_load" pid=492 name=/usr/lib/cups/backend/cups-pdf [ 7.697403] type=1505 audit(1264783343.417:10): operation="profile_load" pid=492 name=/usr/sbin/cupsd [ 7.713100] type=1505 audit(1264783343.437:11): operation="profile_load" pid=493 name=/usr/sbin/mysqld [ 8.780150] usb-storage: device scan complete [ 8.782493] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 8.782974] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 8.783471] scsi 6:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 [ 8.784194] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 8.784559] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 8.784630] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 8.784687] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 8.784744] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 8.788225] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 8.788850] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 8.789473] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 8.790097] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 19.220821] udev: starting version 147 [ 19.226740] Adding 8000328k swap on /dev/sda5. Priority:-1 extents:1 across:8000328k [ 19.241123] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [ 19.241141] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 [ 19.243581] i2c-adapter i2c-2: nForce2 SMBus adapter at 0xe800 [ 19.243599] i2c-adapter i2c-3: nForce2 SMBus adapter at 0xe480 [ 19.245688] lp: driver loaded but no devices found [ 19.257937] EDAC MC: Ver: 2.1.0 Dec 10 2009 [ 19.260280] parport_pc 00:06: reported by Plug and Play ACPI [ 19.260397] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 19.261532] EDAC amd64_edac: Ver: 3.2.0 Dec 10 2009 [ 19.263539] EDAC amd64: ECC is enabled by BIOS, Proceeding with EDAC module initialization [ 19.292924] EDAC amd64: ECC is enabled by BIOS, Proceeding with EDAC module initialization [ 19.293192] EDAC MC: F10h CPU detected [ 19.293271] EDAC MC0: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:18.2 [ 19.293274] EDAC MC: F10h CPU detected [ 19.293327] EDAC MC1: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:19.2 [ 19.293347] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 19.295251] nvidia: module license 'NVIDIA' taints kernel. [ 19.295256] Disabling lock debugging due to kernel taint [ 19.302345] ppdev: user-space parallel port driver [ 19.316674] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.341428] lp0: using parport0 (interrupt-driven). [ 19.550148] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 [ 19.550152] alloc irq_desc for 19 on node 0 [ 19.550154] alloc kstat_irqs on node 0 [ 19.550164] CA0106 0000:01:01.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19 [ 19.550197] snd-ca0106: Model 1012 Rev 00000000 Serial 10121102 [ 19.560914] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 18 [ 19.560917] alloc irq_desc for 18 on node 0 [ 19.560918] alloc kstat_irqs on node 0 [ 19.560925] nvidia 0000:07:00.0: PCI INT A -> Link[LNEB] -> GSI 18 (level, low) -> IRQ 18 [ 19.560931] nvidia 0000:07:00.0: setting latency timer to 64 [ 19.561130] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 20.968015] EXT3 FS on sda6, internal journal [ 23.134962] kjournald starting. Commit interval 5 seconds [ 23.135289] EXT3 FS on sdb1, internal journal [ 23.135296] EXT3-fs: mounted filesystem with writeback data mode. [ 41.150685] kjournald starting. Commit interval 5 seconds [ 41.151033] EXT3 FS on sda7, internal journal [ 41.151041] EXT3-fs: mounted filesystem with writeback data mode. [ 41.223184] __ratelimit: 3 callbacks suppressed [ 41.223187] type=1505 audit(1264783376.947:13): operation="profile_replace" pid=1101 name=/usr/share/gdm/guest-session/Xsession [ 41.224422] type=1505 audit(1264783376.947:14): operation="profile_replace" pid=1102 name=/sbin/dhclient3 [ 41.224664] type=1505 audit(1264783376.947:15): operation="profile_replace" pid=1102 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 41.224801] type=1505 audit(1264783376.947:16): operation="profile_replace" pid=1102 name=/usr/lib/connman/scripts/dhclient-script [ 41.227448] type=1505 audit(1264783376.947:17): operation="profile_replace" pid=1103 name=/usr/bin/evince [ 41.231264] type=1505 audit(1264783376.947:18): operation="profile_replace" pid=1103 name=/usr/bin/evince-previewer [ 41.233668] type=1505 audit(1264783376.957:19): operation="profile_replace" pid=1103 name=/usr/bin/evince-thumbnailer [ 41.238016] type=1505 audit(1264783376.957:20): operation="profile_replace" pid=1105 name=/usr/lib/cups/backend/cups-pdf [ 41.238310] type=1505 audit(1264783376.957:21): operation="profile_replace" pid=1105 name=/usr/sbin/cupsd [ 41.239674] type=1505 audit(1264783376.957:22): operation="profile_replace" pid=1106 name=/usr/sbin/mysqld [ 41.273565] alloc irq_desc for 60 on node 0 [ 41.273569] alloc kstat_irqs on node 0 [ 41.273580] forcedeth 0000:00:08.0: irq 60 for MSI/MSI-X [ 41.279022] alloc irq_desc for 61 on node 0 [ 41.279026] alloc kstat_irqs on node 0 [ 41.279033] forcedeth 0000:00:09.0: irq 61 for MSI/MSI-X [ 41.279219] eth1: no link during initialization. [ 41.281544] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 41.662617] usplash:428 freeing invalid memtype ffffffffdd000000-ffffffffdde00000 [ 42.940884] /dev/vmmon[1520]: Module vmmon: registered with major=10 minor=165 [ 42.940921] /dev/vmmon[1520]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 42.940937] /dev/vmmon[1520]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 42.940939] /dev/vmmon[1520]: Module vmmon: initialized [ 42.957462] /dev/vmci[1534]: VMCI: Driver initialized. [ 42.957488] /dev/vmci[1534]: Module vmci: registered with major=10 minor=55 [ 42.957490] /dev/vmci[1534]: Module vmci: initialized [ 43.062662] /dev/vmnet: open called by PID 1613 (vmnet-bridge) [ 43.062671] /dev/vmnet: hub 0 does not exist, allocating memory. [ 43.062689] /dev/vmnet: port on hub 0 successfully opened [ 43.062703] bridge-eth0: up [ 43.062707] bridge-eth0: attached [ 43.648708] /dev/vmnet: open called by PID 1628 (vmnet-dhcpd) [ 43.648719] /dev/vmnet: hub 1 does not exist, allocating memory. [ 43.648736] /dev/vmnet: port on hub 1 successfully opened [ 43.659380] /dev/vmnet: open called by PID 1630 (vmnet-netifup) [ 43.659390] /dev/vmnet: port on hub 1 successfully opened [ 43.694314] /dev/vmnet: open called by PID 1634 (vmnet-dhcpd) [ 43.694326] /dev/vmnet: hub 8 does not exist, allocating memory. [ 43.694345] /dev/vmnet: port on hub 8 successfully opened [ 43.732092] /dev/vmnet: open called by PID 1641 (vmnet-natd) [ 43.732108] /dev/vmnet: port on hub 8 successfully opened [ 43.740517] /dev/vmnet: open called by PID 1642 (vmnet-netifup) [ 43.740533] /dev/vmnet: port on hub 8 successfully opened [ 44.163934] CPU0 attaching NULL sched-domain. [ 44.163939] CPU1 attaching NULL sched-domain. [ 44.163941] CPU2 attaching NULL sched-domain. [ 44.163943] CPU3 attaching NULL sched-domain. [ 44.163946] CPU4 attaching NULL sched-domain. [ 44.163948] CPU5 attaching NULL sched-domain. [ 44.163950] CPU6 attaching NULL sched-domain. [ 44.163952] CPU7 attaching NULL sched-domain. [ 44.210133] CPU0 attaching sched-domain: [ 44.210137] domain 0: span 0-3 level MC [ 44.210139] groups: 0 1 2 3 [ 44.210143] domain 1: span 0-7 level NODE [ 44.210145] groups: 0-3 4-7 [ 44.210149] CPU1 attaching sched-domain: [ 44.210151] domain 0: span 0-3 level MC [ 44.210152] groups: 1 2 3 0 [ 44.210155] domain 1: span 0-7 level NODE [ 44.210157] groups: 0-3 4-7 [ 44.210160] CPU2 attaching sched-domain: [ 44.210161] domain 0: span 0-3 level MC [ 44.210163] groups: 2 3 0 1 [ 44.210166] domain 1: span 0-7 level NODE [ 44.210167] groups: 0-3 4-7 [ 44.210170] CPU3 attaching sched-domain: [ 44.210172] domain 0: span 0-3 level MC [ 44.210173] groups: 3 0 1 2 [ 44.210176] domain 1: span 0-7 level NODE [ 44.210177] groups: 0-3 4-7 [ 44.210180] CPU4 attaching sched-domain: [ 44.210182] domain 0: span 4-7 level MC [ 44.210183] groups: 4 5 6 7 [ 44.210186] domain 1: span 0-7 level NODE [ 44.210187] groups: 4-7 0-3 [ 44.210190] CPU5 attaching sched-domain: [ 44.210192] domain 0: span 4-7 level MC [ 44.210193] groups: 5 6 7 4 [ 44.210196] domain 1: span 0-7 level NODE [ 44.210198] groups: 4-7 0-3 [ 44.210201] CPU6 attaching sched-domain: [ 44.210202] domain 0: span 4-7 level MC [ 44.210204] groups: 6 7 4 5 [ 44.210207] domain 1: span 0-7 level NODE [ 44.210208] groups: 4-7 0-3 [ 44.210211] CPU7 attaching sched-domain: [ 44.210213] domain 0: span 4-7 level MC [ 44.210214] groups: 7 4 5 6 [ 44.210217] domain 1: span 0-7 level NODE [ 44.210219] groups: 4-7 0-3 [ 44.466692] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 44.466695] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 44.466697] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 44.466698] vboxdrv: the usage of hardware performance counters by [ 44.466699] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 44.466702] vboxdrv: Found 8 processor cores. [ 44.466774] VBoxDrv: dbg - g_abExecMemory=ffffffffa0bb4280 [ 44.466922] vboxdrv: fAsync=0 offMin=0x4d4 offMax=0x8073 [ 44.466970] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 44.466972] vboxdrv: Successfully loaded version 3.1.2 (interface 0x00100001). [ 51.660007] eth0: no IPv6 routers present [ 53.960017] vmnet1: no IPv6 routers present [ 54.000024] vmnet8: no IPv6 routers present [ 76.930009] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445479290330885917 new 18445479290352570285 attempts 1 [28030.082529] __ratelimit: 18 callbacks suppressed [28030.082534] npviewer.bin[7260]: segfault at 3c ip 00000000f61292ea sp 00000000ff800d50 error 4 in libflashplayer.so[f5ede000+993000] [87422.220029] usb 1-4: new high speed USB device using ehci_hcd and address 4 [87423.320261] hub 1-0:1.0: unable to enumerate USB device on port 4 [87423.860031] usb 2-4: new full speed USB device using ohci_hcd and address 3 [87424.075965] usb 2-4: not running at top speed; connect to a high speed hub [87424.101081] usb 2-4: configuration #1 chosen from 1 choice [87424.117304] scsi7 : SCSI emulation for USB Mass Storage devices [87424.117442] usb-storage: device found at 3 [87424.117445] usb-storage: waiting for device to settle before scanning [87429.111412] usb-storage: device scan complete [87429.118382] scsi 7:0:0:0: Direct-Access SanDisk Sansa Fuze 2GB v01. PQ: 0 ANSI: 0 [87429.125377] scsi 7:0:0:1: Direct-Access SanDisk Sansa Fuze 2GB v01. PQ: 0 ANSI: 0 [87429.125934] sd 7:0:0:0: Attached scsi generic sg7 type 0 [87429.126037] sd 7:0:0:1: Attached scsi generic sg8 type 0 [87429.153343] sd 7:0:0:0: [sdg] 3951616 512-byte logical blocks: (2.02 GB/1.88 GiB) [87429.183334] sd 7:0:0:0: [sdg] Write Protect is off [87429.183337] sd 7:0:0:0: [sdg] Mode Sense: 04 00 00 00 [87429.183340] sd 7:0:0:0: [sdg] Assuming drive cache: write through [87429.291341] sd 7:0:0:1: [sdh] Attached SCSI removable disk [87429.323315] sd 7:0:0:0: [sdg] Assuming drive cache: write through [87429.323320] sdg: [87429.380309] sd 7:0:0:0: [sdg] Assuming drive cache: write through [87429.380312] sd 7:0:0:0: [sdg] Attached SCSI removable disk