[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-26-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 (Ubuntu 3.2.0-26.41-generic 3.2.19) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-26-generic root=UUID=2d7b9c4e-092d-4ad2-a57e-447a44ab2f88 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000008fec0000 (usable) [ 0.000000] BIOS-e820: 000000008fec0000 - 000000008fecf000 (ACPI data) [ 0.000000] BIOS-e820: 000000008fecf000 - 000000008fee5000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000008fee5000 - 00000000a0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000160000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: Dell Inc. Studio XPS 1340/0Y525R, BIOS A15 04/08/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x160000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DBFFF uncachable [ 0.000000] DC000-EFFFF write-through [ 0.000000] F0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0A0000000 mask FE0000000 uncachable [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 140000000 mask FE0000000 write-back [ 0.000000] 5 base 09FF00000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 2560MB, range: 512MB, type UC [ 0.000000] reg 1, base: 3GB, range: 1GB, type UC [ 0.000000] reg 2, base: 0GB, range: 4GB, type WB [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] reg 4, base: 5GB, range: 512MB, type WB [ 0.000000] reg 5, base: 2559MB, range: 1MB, type UC [ 0.000000] total RAM covered: 4095M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 512MB, type WB [ 0.000000] reg 2, base: 2559MB, range: 1MB, type UC [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] reg 4, base: 5GB, range: 512MB, type WB [ 0.000000] e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x8fec0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f7b50] f7b50 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000008fec0000 [ 0.000000] 0000000000 - 008fe00000 page 2M [ 0.000000] 008fe00000 - 008fec0000 page 4k [ 0.000000] kernel direct mapping tables up to 8fec0000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000160000000 [ 0.000000] 0100000000 - 0160000000 page 2M [ 0.000000] kernel direct mapping tables up to 160000000 @ 8feb9000-8fec0000 [ 0.000000] RAMDISK: 364e0000 - 37268000 [ 0.000000] ACPI: RSDP 00000000000f7b20 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 000000008fec37f6 000A4 (v01 DELL QA09 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 000000008fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 000000008fec5388 09808 (v01 NVIDIA MCP79 06040000 MSFT 03000001) [ 0.000000] ACPI: FACS 000000008fee4fc0 00040 [ 0.000000] ACPI: MCFG 000000008fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 000000008feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 000000008feced6c 00072 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 000000008fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 000000008fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000) [ 0.000000] ACPI: OSFR 000000008fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061) [ 0.000000] ACPI: SSDT 000000008fec5129 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec5083 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4fdd 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4f37 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4e91 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4deb 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4d45 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4c9f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec389a 01405 (v01 PmRef CpuPm 00003000 INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000160000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000160000000 [ 0.000000] NODE_DATA [000000015fffb000 - 000000015fffffff] [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ba00000-ffff88015f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00160000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0008fec0 [ 0.000000] 0: 0x00100000 -> 0x00160000 [ 0.000000] On node 0 totalpages: 982605 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 569088 pages, LIFO batch:31 [ 0.000000] Normal zone: 6144 pages used for memmap [ 0.000000] Normal zone: 387072 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10dea301 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000008fec0000 - 000000008fecf000 [ 0.000000] PM: Registered nosave memory: 000000008fecf000 - 000000008fee5000 [ 0.000000] PM: Registered nosave memory: 000000008fee5000 - 00000000a0000000 [ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000 [ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88015fc00000 s83072 r8192 d23424 u1048576 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 960072 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-26-generic root=UUID=2d7b9c4e-092d-4ad2-a57e-447a44ab2f88 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3773012k/5767168k available (6555k kernel code, 1836748k absent, 157408k reserved, 6645k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 31457280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2666.712 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.42 BogoMIPS (lpj=10666848) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004031] Security Framework initialized [ 0.004048] AppArmor: AppArmor initialized [ 0.004049] Yama: becoming mindful. [ 0.004393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009174] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010039] Mount-cache hash table entries: 256 [ 0.010165] Initializing cgroup subsys cpuacct [ 0.010170] Initializing cgroup subsys memory [ 0.010180] Initializing cgroup subsys devices [ 0.010181] Initializing cgroup subsys freezer [ 0.010183] Initializing cgroup subsys blkio [ 0.010189] Initializing cgroup subsys perf_event [ 0.010217] CPU: Physical Processor ID: 0 [ 0.010219] CPU: Processor Core ID: 0 [ 0.010221] mce: CPU supports 6 MCE banks [ 0.010228] CPU0: Thermal monitoring handled by SMI [ 0.010232] using mwait in idle threads. [ 0.012572] ACPI: Core revision 20110623 [ 0.020012] ftrace: allocating 26991 entries in 106 pages [ 0.024491] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065974] CPU0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz stepping 0a [ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.068003] ... version: 2 [ 0.068003] ... bit width: 40 [ 0.068003] ... generic registers: 2 [ 0.068003] ... value mask: 000000ffffffffff [ 0.068003] ... max period: 000000007fffffff [ 0.068003] ... fixed-purpose events: 3 [ 0.068003] ... event mask: 0000000700000003 [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.068003] Booting Node 0, Processors #1 Ok. [ 0.068003] smpboot cpu 1: start_ip = 98000 [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.156032] NMI watchdog enabled, takes one hw-pmu counter. [ 0.156067] Brought up 2 CPUs [ 0.156069] Total of 2 processors activated (10666.66 BogoMIPS). [ 0.158964] devtmpfs: initialized [ 0.160032] EVM: security.selinux [ 0.160034] EVM: security.SMACK64 [ 0.160035] EVM: security.capability [ 0.160044] PM: Registering ACPI NVS region at 8fecf000 (90112 bytes) [ 0.160628] print_constraints: dummy: [ 0.160687] RTC time: 22:22:53, date: 06/20/12 [ 0.160715] NET: Registered protocol family 16 [ 0.160774] Trying to unpack rootfs image as initramfs... [ 0.160833] ACPI: bus type pci registered [ 0.160892] PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000) [ 0.160895] PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820 [ 0.162096] PCI: Using configuration type 1 for base access [ 0.162966] bio: create slab at 0 [ 0.163034] ACPI: Added _OSI(Module Device) [ 0.163036] ACPI: Added _OSI(Processor Device) [ 0.163038] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.163040] ACPI: Added _OSI(Processor Aggregator Device) [ 0.164354] ACPI: EC: Look up EC in DSDT [ 0.204301] ACPI: SSDT 000000008fee10c8 00261 (v01 PmRef Cpu0Ist 00003000 INTL 20050228) [ 0.204602] ACPI: Dynamic OEM Table Load: [ 0.204605] ACPI: SSDT (null) 00261 (v01 PmRef Cpu0Ist 00003000 INTL 20050228) [ 0.205076] ACPI: SSDT 000000008fee16cc 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228) [ 0.205395] ACPI: Dynamic OEM Table Load: [ 0.205397] ACPI: SSDT (null) 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228) [ 0.280054] ACPI: SSDT 000000008fee0ed6 001F2 (v01 PmRef Cpu1Ist 00003000 INTL 20050228) [ 0.280383] ACPI: Dynamic OEM Table Load: [ 0.280386] ACPI: SSDT (null) 001F2 (v01 PmRef Cpu1Ist 00003000 INTL 20050228) [ 0.280534] ACPI: SSDT 000000008fee1647 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228) [ 0.280824] ACPI: Dynamic OEM Table Load: [ 0.280827] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228) [ 0.288302] ACPI: Interpreter enabled [ 0.288307] ACPI: (supports S0 S3 S4 S5) [ 0.288322] ACPI: Using IOAPIC for interrupt routing [ 0.292095] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.344277] ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62 [ 0.344462] ACPI: No dock devices found. [ 0.344465] HEST: Table not found. [ 0.344468] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.372137] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.372261] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.372263] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.372265] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.372267] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] [ 0.372269] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] [ 0.372271] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] [ 0.372273] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] [ 0.372275] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.372277] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.372279] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.372281] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.372283] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 0.372285] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] [ 0.372287] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] [ 0.372289] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] [ 0.372291] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] [ 0.372293] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff] [ 0.372299] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff]) [ 0.372302] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d0fff]) [ 0.372320] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600 [ 0.372420] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500 [ 0.372562] pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601 [ 0.372570] pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff] [ 0.372614] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500 [ 0.372692] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05 [ 0.372704] pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf] [ 0.372724] pci 0000:00:03.2: reg 20: [io 0x3040-0x307f] [ 0.372731] pci 0000:00:03.2: reg 24: [io 0x2000-0x203f] [ 0.372764] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.372770] pci 0000:00:03.2: PME# disabled [ 0.372790] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500 [ 0.372933] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40 [ 0.372951] pci 0000:00:03.5: reg 10: [mem 0xf0800000-0xf087ffff] [ 0.373072] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03 [ 0.373083] pci 0000:00:04.0: reg 10: [mem 0xf0886000-0xf0886fff] [ 0.373127] pci 0000:00:04.0: supports D1 D2 [ 0.373129] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373132] pci 0000:00:04.0: PME# disabled [ 0.373145] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03 [ 0.373158] pci 0000:00:04.1: reg 10: [mem 0xf0889000-0xf08890ff] [ 0.373210] pci 0000:00:04.1: supports D1 D2 [ 0.373212] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373215] pci 0000:00:04.1: PME# disabled [ 0.373236] pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03 [ 0.373246] pci 0000:00:06.0: reg 10: [mem 0xf0887000-0xf0887fff] [ 0.373293] pci 0000:00:06.0: supports D1 D2 [ 0.373295] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373298] pci 0000:00:06.0: PME# disabled [ 0.373311] pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03 [ 0.373324] pci 0000:00:06.1: reg 10: [mem 0xf0889400-0xf08894ff] [ 0.373376] pci 0000:00:06.1: supports D1 D2 [ 0.373378] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373381] pci 0000:00:06.1: PME# disabled [ 0.373404] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403 [ 0.373414] pci 0000:00:08.0: reg 10: [mem 0xf0880000-0xf0883fff] [ 0.373459] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.373462] pci 0000:00:08.0: PME# disabled [ 0.373473] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604 [ 0.373515] pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200 [ 0.373525] pci 0000:00:0a.0: reg 10: [mem 0xf0888000-0xf0888fff] [ 0.373531] pci 0000:00:0a.0: reg 14: [io 0x30d0-0x30d7] [ 0.373538] pci 0000:00:0a.0: reg 18: [mem 0xf0889c00-0xf0889cff] [ 0.373544] pci 0000:00:0a.0: reg 1c: [mem 0xf0889800-0xf088980f] [ 0.373575] pci 0000:00:0a.0: supports D1 D2 [ 0.373577] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373581] pci 0000:00:0a.0: PME# disabled [ 0.373594] pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106 [ 0.373604] pci 0000:00:0b.0: reg 10: [io 0x30e8-0x30ef] [ 0.373610] pci 0000:00:0b.0: reg 14: [io 0x30dc-0x30df] [ 0.373615] pci 0000:00:0b.0: reg 18: [io 0x30e0-0x30e7] [ 0.373621] pci 0000:00:0b.0: reg 1c: [io 0x30d8-0x30db] [ 0.373626] pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf] [ 0.373632] pci 0000:00:0b.0: reg 24: [mem 0xf0884000-0xf0885fff] [ 0.373705] pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604 [ 0.373923] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373930] pci 0000:00:0c.0: PME# disabled [ 0.373975] pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604 [ 0.374013] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.374016] pci 0000:00:10.0: PME# disabled [ 0.374069] pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604 [ 0.374288] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.374295] pci 0000:00:15.0: PME# disabled [ 0.374372] pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604 [ 0.374590] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.374597] pci 0000:00:16.0: PME# disabled [ 0.374675] pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604 [ 0.374893] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.374901] pci 0000:00:17.0: PME# disabled [ 0.374977] pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604 [ 0.375195] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.375203] pci 0000:00:18.0: PME# disabled [ 0.375275] pci 0000:01:07.0: [1180:0832] type 0 class 0x000c00 [ 0.375285] pci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.375287] pci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller [ 0.375298] pci 0000:01:07.0: reg 10: [mem 0xf0500000-0xf05007ff] [ 0.375359] pci 0000:01:07.0: supports D1 D2 [ 0.375361] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.375364] pci 0000:01:07.0: PME# disabled [ 0.375378] pci 0000:01:07.1: [1180:0822] type 0 class 0x000805 [ 0.375392] pci 0000:01:07.1: reg 10: [mem 0xf0500800-0xf05008ff] [ 0.375453] pci 0000:01:07.1: supports D1 D2 [ 0.375454] pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.375458] pci 0000:01:07.1: PME# disabled [ 0.375472] pci 0000:01:07.2: [1180:0592] type 0 class 0x000880 [ 0.375486] pci 0000:01:07.2: reg 10: [mem 0xf0501000-0xf05010ff] [ 0.375547] pci 0000:01:07.2: supports D1 D2 [ 0.375549] pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.375553] pci 0000:01:07.2: PME# disabled [ 0.375566] pci 0000:01:07.3: [1180:0852] type 0 class 0x000880 [ 0.375580] pci 0000:01:07.3: reg 10: [mem 0xf0501400-0xf05014ff] [ 0.375640] pci 0000:01:07.3: supports D1 D2 [ 0.375642] pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.375645] pci 0000:01:07.3: PME# disabled [ 0.375681] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.375685] pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff] [ 0.375688] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.375691] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.375693] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.375695] pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.375697] pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.375699] pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.375701] pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.375704] pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.375706] pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.375708] pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.375710] pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.375712] pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.375715] pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.375717] pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode) [ 0.375719] pci 0000:00:09.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode) [ 0.375883] pci 0000:02:00.0: [10de:0a74] type 0 class 0x000300 [ 0.375903] pci 0000:02:00.0: reg 10: [mem 0xae000000-0xaeffffff] [ 0.375936] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.375957] pci 0000:02:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.375973] pci 0000:02:00.0: reg 24: [io 0x4000-0x407f] [ 0.375989] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.384056] pci 0000:00:0c.0: PCI bridge to [bus 02-02] [ 0.384070] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff] [ 0.384077] pci 0000:00:0c.0: bridge window [mem 0xae000000-0xafefffff] [ 0.384091] pci 0000:00:0c.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.384123] pci 0000:03:00.0: [10de:0866] type 0 class 0x000300 [ 0.384137] pci 0000:03:00.0: reg 10: [mem 0xac000000-0xacffffff] [ 0.384148] pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.384159] pci 0000:03:00.0: reg 1c: [mem 0xca000000-0xcbffffff 64bit pref] [ 0.384166] pci 0000:03:00.0: reg 24: [io 0x5000-0x507f] [ 0.384173] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.384229] pci 0000:00:10.0: PCI bridge to [bus 03-03] [ 0.384232] pci 0000:00:10.0: bridge window [io 0x5000-0x5fff] [ 0.384235] pci 0000:00:10.0: bridge window [mem 0xac000000-0xacffffff] [ 0.384239] pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcbffffff 64bit pref] [ 0.384372] pci 0000:00:15.0: PCI bridge to [bus 04-05] [ 0.384385] pci 0000:00:15.0: bridge window [io 0x6000-0x6fff] [ 0.384393] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff] [ 0.384407] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.384560] pci 0000:06:00.0: [168c:002a] type 0 class 0x000280 [ 0.384578] pci 0000:06:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit] [ 0.384664] pci 0000:06:00.0: supports D1 [ 0.384666] pci 0000:06:00.0: PME# supported from D0 D1 D3hot [ 0.384670] pci 0000:06:00.0: PME# disabled [ 0.384689] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.384701] pci 0000:00:16.0: PCI bridge to [bus 06-06] [ 0.384720] pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff] [ 0.384867] pci 0000:00:17.0: PCI bridge to [bus 07-07] [ 0.385030] pci 0000:00:18.0: PCI bridge to [bus 08-08] [ 0.385127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.385248] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.385263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.385370] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.385442] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c [ 0.385443] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.394547] Freeing initrd memory: 13856k freed [ 0.405593] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15) [ 0.405663] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15) [ 0.405729] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.405795] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.405861] ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11 [ 0.405926] ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.405992] ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406058] ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406123] ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406189] ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406254] ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406320] ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406385] ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406451] ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406517] ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406585] ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406651] ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10 [ 0.406716] ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406782] ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406848] ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.406914] ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11 [ 0.406980] ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.407045] ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.407112] ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.407178] ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10 [ 0.407243] ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.407309] ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.407375] ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.407440] ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11 [ 0.407508] ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.407574] ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.407641] ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.407706] ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10 [ 0.407771] ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7 [ 0.407836] ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11 [ 0.407900] ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10 [ 0.407965] ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11 [ 0.408043] ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5 [ 0.408109] ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.408174] ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11 [ 0.408238] ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.408303] ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5 [ 0.408368] ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10 [ 0.408436] ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10 [ 0.408541] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none [ 0.408541] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.408541] vgaarb: loaded [ 0.408541] vgaarb: bridge control possible 0000:03:00.0 [ 0.408541] vgaarb: bridge control possible 0000:02:00.0 [ 0.408541] i2c-core: driver [aat2870] using legacy suspend method [ 0.408541] i2c-core: driver [aat2870] using legacy resume method [ 0.408541] SCSI subsystem initialized [ 0.408541] libata version 3.00 loaded. [ 0.408541] usbcore: registered new interface driver usbfs [ 0.408541] usbcore: registered new interface driver hub [ 0.408541] usbcore: registered new device driver usb [ 0.408541] PCI: Using ACPI for IRQ routing [ 0.408541] PCI: pci_cache_line_size set to 64 bytes [ 0.408541] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.408541] reserve RAM buffer: 000000008fec0000 - 000000008fffffff [ 0.408541] NetLabel: Initializing [ 0.408541] NetLabel: domain hash size = 128 [ 0.408541] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.408541] NetLabel: unlabeled traffic allowed by default [ 0.408541] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.408541] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.408541] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.412129] Switching to clocksource hpet [ 0.418813] AppArmor: AppArmor Filesystem Enabled [ 0.418834] pnp: PnP ACPI init [ 0.418848] ACPI: bus type pnp registered [ 0.418935] pnp 00:00: [mem 0xffc00000-0xffffffff] [ 0.418937] pnp 00:00: [mem 0xfec00000-0xfec00fff] [ 0.418939] pnp 00:00: [mem 0xfee00000-0xfeefffff] [ 0.418941] pnp 00:00: [mem 0xfed00000-0xfed00fff] [ 0.418998] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved [ 0.419001] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.419003] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.419006] system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.419009] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.419050] pnp 00:01: [bus 00-ff] [ 0.419052] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.419054] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.419056] pnp 00:01: [io 0x0d00-0xffff window] [ 0.419057] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.419059] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.419061] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.419063] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.419065] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.419067] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.419068] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.419070] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.419072] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.419074] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.419076] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.419078] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.419082] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.419084] pnp 00:01: [mem 0x000f0000-0x000fffff window] [ 0.419086] pnp 00:01: [mem 0xa0000000-0xfebfffff window] [ 0.419149] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.419277] pnp 00:02: [irq 0 disabled] [ 0.419288] pnp 00:02: [irq 8] [ 0.419289] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.419323] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.419356] pnp 00:03: [mem 0xf0800000-0xf0807fff] [ 0.419363] pnp 00:03: disabling [mem 0xf0800000-0xf0807fff] because it overlaps 0000:00:03.5 BAR 0 [mem 0xf0800000-0xf087ffff] [ 0.419408] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.419516] pnp 00:04: [io 0x1000-0x107f] [ 0.419518] pnp 00:04: [io 0x1080-0x10ff] [ 0.419520] pnp 00:04: [io 0x1400-0x147f] [ 0.419521] pnp 00:04: [io 0x1480-0x14ff] [ 0.419523] pnp 00:04: [io 0x1800-0x187f] [ 0.419524] pnp 00:04: [io 0x1880-0x18ff] [ 0.419573] system 00:04: [io 0x1000-0x107f] has been reserved [ 0.419575] system 00:04: [io 0x1080-0x10ff] has been reserved [ 0.419577] system 00:04: [io 0x1400-0x147f] has been reserved [ 0.419579] system 00:04: [io 0x1480-0x14ff] has been reserved [ 0.419581] system 00:04: [io 0x1800-0x187f] has been reserved [ 0.419583] system 00:04: [io 0x1880-0x18ff] has been reserved [ 0.419586] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.419594] pnp 00:05: [io 0x0060] [ 0.419595] pnp 00:05: [io 0x0064] [ 0.419601] pnp 00:05: [irq 1] [ 0.419640] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.419651] pnp 00:06: [irq 12] [ 0.419683] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.436047] pnp 00:07: [io 0x0010-0x001f] [ 0.436049] pnp 00:07: [io 0x0022-0x003f] [ 0.436050] pnp 00:07: [io 0x0044-0x005f] [ 0.436052] pnp 00:07: [io 0x0072-0x0073] [ 0.436053] pnp 00:07: [io 0x0074-0x007f] [ 0.436055] pnp 00:07: [io 0x0091-0x0093] [ 0.436057] pnp 00:07: [io 0x0097-0x009f] [ 0.436058] pnp 00:07: [io 0x00a2-0x00bf] [ 0.436060] pnp 00:07: [io 0x00e0-0x00ef] [ 0.436061] pnp 00:07: [io 0x04d0-0x04d1] [ 0.436063] pnp 00:07: [io 0x0080] [ 0.436064] pnp 00:07: [io 0x0910-0x0911] [ 0.436066] pnp 00:07: [io 0x0295-0x0296] [ 0.436123] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.436125] system 00:07: [io 0x0910-0x0911] has been reserved [ 0.436128] system 00:07: [io 0x0295-0x0296] has been reserved [ 0.436130] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.436141] pnp 00:08: [io 0x0000-0x0008] [ 0.436143] pnp 00:08: [io 0x000a-0x000f] [ 0.436144] pnp 00:08: [io 0x0081-0x0083] [ 0.436146] pnp 00:08: [io 0x0087] [ 0.436147] pnp 00:08: [io 0x0089-0x008b] [ 0.436149] pnp 00:08: [io 0x008f] [ 0.436150] pnp 00:08: [io 0x00c0-0x00d1] [ 0.436152] pnp 00:08: [io 0x00d4-0x00df] [ 0.436154] pnp 00:08: [dma 4] [ 0.436187] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.436194] pnp 00:09: [io 0x0061] [ 0.436230] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.436251] pnp 00:0a: [io 0x0070-0x0071] [ 0.436287] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.436295] pnp 00:0b: [io 0x00f0-0x00f1] [ 0.436302] pnp 00:0b: [irq 13] [ 0.436336] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.436348] pnp 00:0c: [io 0x0300-0x0307] [ 0.436353] pnp 00:0c: [irq 10] [ 0.436390] pnp 00:0c: Plug and Play ACPI device, IDs ITE8708 (active) [ 0.436801] pnp: PnP ACPI: found 13 devices [ 0.436803] ACPI: ACPI bus type pnp unregistered [ 0.443701] PCI: max bus depth: 1 pci_try_num: 2 [ 0.443799] pci 0000:00:09.0: PCI bridge to [bus 01-01] [ 0.443803] pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff] [ 0.443812] pci 0000:02:00.0: BAR 6: assigned [mem 0xaf000000-0xaf07ffff pref] [ 0.443814] pci 0000:00:0c.0: PCI bridge to [bus 02-02] [ 0.443819] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff] [ 0.443829] pci 0000:00:0c.0: bridge window [mem 0xae000000-0xafefffff] [ 0.443836] pci 0000:00:0c.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.443849] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref] [ 0.443851] pci 0000:00:10.0: PCI bridge to [bus 03-03] [ 0.443853] pci 0000:00:10.0: bridge window [io 0x5000-0x5fff] [ 0.443856] pci 0000:00:10.0: bridge window [mem 0xac000000-0xacffffff] [ 0.443859] pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcbffffff 64bit pref] [ 0.443863] pci 0000:00:15.0: PCI bridge to [bus 04-05] [ 0.443868] pci 0000:00:15.0: bridge window [io 0x6000-0x6fff] [ 0.443877] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff] [ 0.443884] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.443897] pci 0000:00:16.0: PCI bridge to [bus 06-06] [ 0.443907] pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff] [ 0.443925] pci 0000:00:17.0: PCI bridge to [bus 07-07] [ 0.443951] pci 0000:00:18.0: PCI bridge to [bus 08-08] [ 0.443982] pci 0000:00:09.0: setting latency timer to 64 [ 0.444113] ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23 [ 0.444120] pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23 [ 0.444128] pci 0000:00:0c.0: setting latency timer to 64 [ 0.444135] pci 0000:00:10.0: setting latency timer to 64 [ 0.444239] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22 [ 0.444247] pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22 [ 0.444255] pci 0000:00:15.0: setting latency timer to 64 [ 0.444361] ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21 [ 0.444366] pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21 [ 0.444374] pci 0000:00:16.0: setting latency timer to 64 [ 0.444479] ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20 [ 0.444485] pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20 [ 0.444493] pci 0000:00:17.0: setting latency timer to 64 [ 0.444597] ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19 [ 0.444603] pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19 [ 0.444611] pci 0000:00:18.0: setting latency timer to 64 [ 0.444616] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.444618] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.444620] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.444623] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.444624] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.444626] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.444628] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff] [ 0.444630] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff] [ 0.444632] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff] [ 0.444634] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff] [ 0.444636] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff] [ 0.444637] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff] [ 0.444639] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff] [ 0.444641] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff] [ 0.444643] pci_bus 0000:00: resource 18 [mem 0xa0000000-0xfebfffff] [ 0.444645] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.444648] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.444650] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.444653] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.444655] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.444658] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.444661] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.444663] pci_bus 0000:01: resource 10 [mem 0x000d4000-0x000d7fff] [ 0.444666] pci_bus 0000:01: resource 11 [mem 0x000d8000-0x000dbfff] [ 0.444668] pci_bus 0000:01: resource 12 [mem 0x000dc000-0x000dffff] [ 0.444671] pci_bus 0000:01: resource 13 [mem 0x000e0000-0x000e3fff] [ 0.444673] pci_bus 0000:01: resource 14 [mem 0x000e4000-0x000e7fff] [ 0.444676] pci_bus 0000:01: resource 15 [mem 0x000e8000-0x000ebfff] [ 0.444678] pci_bus 0000:01: resource 16 [mem 0x000ec000-0x000effff] [ 0.444681] pci_bus 0000:01: resource 17 [mem 0x000f0000-0x000fffff] [ 0.444683] pci_bus 0000:01: resource 18 [mem 0xa0000000-0xfebfffff] [ 0.444686] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.444689] pci_bus 0000:02: resource 1 [mem 0xae000000-0xafefffff] [ 0.444691] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref] [ 0.444694] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.444696] pci_bus 0000:03: resource 1 [mem 0xac000000-0xacffffff] [ 0.444699] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xcbffffff 64bit pref] [ 0.444702] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] [ 0.444704] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff] [ 0.444707] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.444710] pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.444742] NET: Registered protocol family 2 [ 0.444863] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.445887] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.449237] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.449691] TCP: Hash tables configured (established 524288 bind 65536) [ 0.449693] TCP reno registered [ 0.449701] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.449738] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.449855] NET: Registered protocol family 1 [ 0.450061] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 0.450079] pci 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 0.450106] pci 0000:00:04.0: PCI INT A disabled [ 0.450213] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 [ 0.450217] pci 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23 [ 0.450237] pci 0000:00:04.1: PCI INT B disabled [ 0.450342] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 22 [ 0.450345] pci 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 22 (level, low) -> IRQ 22 [ 0.504020] pci 0000:00:06.0: PCI INT A disabled [ 0.504127] ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 21 [ 0.504131] pci 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21 [ 0.504146] pci 0000:00:06.1: PCI INT B disabled [ 0.504378] pci 0000:03:00.0: Boot video device [ 0.504383] PCI: CLS 64 bytes, default 64 [ 0.504385] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.504387] Placing 64MB software IO TLB between ffff88008beb9000 - ffff88008feb9000 [ 0.504389] software IO TLB at phys 0x8beb9000 - 0x8feb9000 [ 0.504403] Simple Boot Flag at 0x36 set to 0x1 [ 0.504742] audit: initializing netlink socket (disabled) [ 0.504752] type=2000 audit(1340230972.500:1): initialized [ 0.532383] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.551061] VFS: Disk quotas dquot_6.5.2 [ 0.551110] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.551543] fuse init (API version 7.17) [ 0.551627] msgmni has been set to 7396 [ 0.551953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.551981] io scheduler noop registered [ 0.551983] io scheduler deadline registered [ 0.552030] io scheduler cfq registered (default) [ 0.552704] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.552724] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.552773] intel_idle: MWAIT substates: 0x3122220 [ 0.552775] intel_idle: does not run on family 6 model 23 [ 0.568036] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.584038] ACPI: AC Adapter [ADP0] (on-line) [ 0.584097] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.584102] ACPI: Power Button [PWRB] [ 0.584144] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input1 [ 0.584147] ACPI: Sleep Button [SLPB] [ 0.584192] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.600035] ACPI: Lid Switch [LID] [ 0.600074] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.600076] ACPI: Power Button [PWRF] [ 0.601151] Monitor-Mwait will be used to enter C-1 state [ 0.601177] Monitor-Mwait will be used to enter C-2 state [ 0.601201] Monitor-Mwait will be used to enter C-3 state [ 0.601208] Marking TSC unstable due to TSC halts in idle [ 0.601221] ACPI: acpi_idle registered with cpuidle [ 0.680035] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.680037] ACPI: Thermal Zone [THRM] (39 C) [ 0.680058] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.680065] ACPI: Battery Slot [BAT0] (battery present) [ 0.680092] ERST: Table is not found! [ 0.680094] GHES: HEST is not enabled! [ 0.680159] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.768323] Linux agpgart interface v0.103 [ 0.769604] brd: module loaded [ 0.770286] loop: module loaded [ 0.770383] ahci 0000:00:0b.0: version 3.0 [ 0.770493] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 20 [ 0.770497] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20 [ 0.770536] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X [ 0.770542] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP [ 0.770588] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.770591] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs [ 0.770594] ahci 0000:00:0b.0: setting latency timer to 64 [ 0.771270] scsi0 : ahci [ 0.771348] scsi1 : ahci [ 0.771416] scsi2 : ahci [ 0.771482] scsi3 : ahci [ 0.771545] scsi4 : ahci [ 0.771614] scsi5 : ahci [ 0.771720] ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 40 [ 0.771723] ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 40 [ 0.771725] ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 40 [ 0.771727] ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 40 [ 0.771729] ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 40 [ 0.771731] ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 40 [ 0.772073] Fixed MDIO Bus: probed [ 0.772090] tun: Universal TUN/TAP device driver, 1.6 [ 0.772091] tun: (C) 1999-2004 Max Krasnyansky [ 0.772138] PPP generic driver version 2.4.2 [ 0.772231] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.772244] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23 [ 0.772256] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.772259] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.772299] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 0.772318] ehci_hcd 0000:00:04.1: debug port 1 [ 0.772326] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.772340] ehci_hcd 0000:00:04.1: irq 23, io mem 0xf0889000 [ 0.784016] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.784124] hub 1-0:1.0: USB hub found [ 0.784128] hub 1-0:1.0: 4 ports detected [ 0.784187] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21 [ 0.784196] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 0.784199] ehci_hcd 0000:00:06.1: EHCI Host Controller [ 0.784239] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2 [ 0.784254] ehci_hcd 0000:00:06.1: debug port 1 [ 0.784261] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported [ 0.784273] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf0889400 [ 0.796015] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00 [ 0.796115] hub 2-0:1.0: USB hub found [ 0.796120] hub 2-0:1.0: 3 ports detected [ 0.796178] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.796190] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 0.796199] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.796201] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.796240] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3 [ 0.796259] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf0886000 [ 0.854098] hub 3-0:1.0: USB hub found [ 0.854103] hub 3-0:1.0: 4 ports detected [ 0.854158] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 22 (level, low) -> IRQ 22 [ 0.854168] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 0.854170] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 0.854210] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4 [ 0.854230] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0887000 [ 0.910095] hub 4-0:1.0: USB hub found [ 0.910099] hub 4-0:1.0: 3 ports detected [ 0.910156] uhci_hcd: USB Universal Host Controller Interface driver [ 0.910203] usbcore: registered new interface driver libusual [ 0.910235] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.914893] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.914897] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.915019] mousedev: PS/2 mouse device common for all mice [ 0.915218] rtc_cmos 00:0a: RTC can wake from S4 [ 0.915409] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 [ 0.915466] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.915526] device-mapper: uevent: version 1.0.3 [ 0.915591] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.915643] cpuidle: using governor ladder [ 0.915725] cpuidle: using governor menu [ 0.915727] EFI Variables Facility v0.08 2004-May-17 [ 0.915913] TCP cubic registered [ 0.916029] NET: Registered protocol family 10 [ 0.916415] NET: Registered protocol family 17 [ 0.916420] Registering the dns_resolver key type [ 0.916600] PM: Hibernation image not present or could not be loaded. [ 0.916611] registered taskstats version 1 [ 0.926889] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.931520] Magic number: 0:660:401 [ 0.931652] rtc_cmos 00:0a: setting system clock to 2012-06-20 22:22:53 UTC (1340230973) [ 0.931873] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.931874] EDD information not available. [ 1.088125] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.088143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.092054] ata4: SATA link down (SStatus 0 SControl 300) [ 1.092070] ata3: SATA link down (SStatus 0 SControl 300) [ 1.092085] ata6: SATA link down (SStatus 0 SControl 300) [ 1.092106] ata5: SATA link down (SStatus 0 SControl 300) [ 1.102247] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-D633A, DW40, max UDMA/100 [ 1.102252] ata2.00: applying bridge limits [ 1.116122] ata2.00: configured for UDMA/100 [ 1.127349] ata1.00: ATA-8: ST9500420ASG, 0004SDM1, max UDMA/133 [ 1.127353] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.129896] ata1.00: configured for UDMA/133 [ 1.130065] scsi 0:0:0:0: Direct-Access ATA ST9500420ASG 0004 PQ: 0 ANSI: 5 [ 1.130171] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.130187] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.130211] sd 0:0:0:0: [sda] Write Protect is off [ 1.130213] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.130232] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.132442] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-D633A DW40 PQ: 0 ANSI: 5 [ 1.136117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.136121] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.136235] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.136315] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.164192] sda: sda1 < sda5 > sda2 [ 1.164874] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.166191] Freeing unused kernel memory: 920k freed [ 1.166422] Write protecting the kernel read-only data: 12288k [ 1.170940] Freeing unused kernel memory: 1616k freed [ 1.174738] Freeing unused kernel memory: 1200k freed [ 1.187446] udevd[103]: starting version 175 [ 1.300321] ACPI: Battery Slot [BAT0] (battery present) [ 1.320061] usb 2-3: new high-speed USB device number 2 using ehci_hcd [ 1.345208] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.345362] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 19 [ 1.345367] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 19 (level, low) -> IRQ 19 [ 1.345372] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.363083] sdhci: Secure Digital Host Controller Interface driver [ 1.363086] sdhci: Copyright(c) Pierre Ossman [ 1.363299] sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22) [ 1.363442] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 [ 1.363452] sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 1.363476] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.363495] mmc0: no vmmc regulator found [ 1.363519] Registered led device: mmc0:: [ 1.365822] mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA [ 1.366076] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 [ 1.366080] firewire_ohci 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 [ 1.421117] firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 1.649604] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.844058] usb 3-1: new full-speed USB device number 2 using ohci_hcd [ 1.868875] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:26:b9:18:a7:8d [ 1.868878] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3 [ 1.920139] firewire_core: created device fw0: GUID 324fc00022c1c641, S400 [ 2.376060] usb 3-4: new full-speed USB device number 3 using ohci_hcd [ 2.601090] hub 3-4:1.0: USB hub found [ 2.604042] hub 3-4:1.0: 3 ports detected [ 2.906039] usb 3-4.1: new full-speed USB device number 4 using ohci_hcd [ 3.098045] usb 3-4.2: new full-speed USB device number 5 using ohci_hcd [ 20.519699] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.563679] udevd[371]: starting version 175 [ 20.714912] Adding 7198716k swap on /dev/sda5. Priority:-1 extents:1 across:7198716k [ 20.984335] type=1400 audit(1340230993.549:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=652 comm="apparmor_parser" [ 20.984653] type=1400 audit(1340230993.549:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=652 comm="apparmor_parser" [ 20.984839] type=1400 audit(1340230993.549:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=652 comm="apparmor_parser" [ 20.985854] type=1400 audit(1340230993.549:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=688 comm="apparmor_parser" [ 20.986170] type=1400 audit(1340230993.549:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=688 comm="apparmor_parser" [ 20.986356] type=1400 audit(1340230993.549:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=688 comm="apparmor_parser" [ 21.080725] wmi: Mapper loaded [ 21.128032] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 21.139638] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 21.232189] acpi device:0c: registered as cooling_device2 [ 21.232298] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:00/input/input5 [ 21.232351] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 21.232374] [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS [ 21.294010] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.327628] IR NEC protocol handler initialized [ 21.340206] acpi device:14: registered as cooling_device3 [ 21.340886] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input6 [ 21.340957] ACPI: Video Device [Z01I] (multi-head: yes rom: yes post: no) [ 21.482693] ite_cir: Auto-detected model: ITE8708 CIR transceiver [ 21.482696] ite_cir: Using model: ITE8708 CIR transceiver [ 21.482698] ite_cir: TX-capable: 1 [ 21.482700] ite_cir: Sample period (ns): 8680 [ 21.482701] ite_cir: TX carrier frequency (Hz): 38000 [ 21.482702] ite_cir: TX duty cycle (%): 33 [ 21.482704] ite_cir: RX low carrier frequency (Hz): 0 [ 21.482705] ite_cir: RX high carrier frequency (Hz): 0 [ 21.492351] IR RC5(x) protocol handler initialized [ 21.493509] lp: driver loaded but no devices found [ 21.536033] Registered IR keymap rc-rc6-mce [ 21.536150] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input7 [ 21.536322] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0 [ 21.536480] ite_cir: driver has been successfully loaded [ 21.585734] r592 0000:01:07.2: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 21.585808] r592: driver successfully loaded [ 21.624551] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 21.663799] cfg80211: Calling CRDA to update world regulatory domain [ 21.667749] cfg80211: World regulatory domain updated: [ 21.667751] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.667754] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.667756] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.667758] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.667761] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.667763] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.689884] IR RC6 protocol handler initialized [ 21.722411] Linux video capture interface: v2.00 [ 21.764987] uvcvideo: Found UVC 1.00 device Integrated_Webcam_1.3M (0c45:63fc) [ 21.772938] input: Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input9 [ 21.773011] usbcore: registered new interface driver uvcvideo [ 21.773013] USB Video Class driver (1.1.1) [ 21.793936] i2c i2c-0: nForce2 SMBus adapter at 0x3040 [ 21.793963] i2c i2c-1: nForce2 SMBus adapter at 0x2000 [ 21.884864] r852 0000:01:07.3: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 21.884924] r852: driver loaded successfully [ 21.885762] IR JVC protocol handler initialized [ 21.963897] IR Sony protocol handler initialized [ 22.078764] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input10 [ 22.078849] IR MCE Keyboard/mouse protocol handler initialized [ 22.086295] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.0/input/input11 [ 22.086448] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.0-1/input0 [ 22.089876] lirc_dev: IR Remote Control driver registered, major 249 [ 22.090614] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0 [ 22.090616] IR LIRC bridge handler initialized [ 22.097111] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.1/input/input12 [ 22.098200] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-1/input1 [ 22.103298] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input13 [ 22.103465] generic-usb 0003:413C:8157.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0 [ 22.109359] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input14 [ 22.109509] generic-usb 0003:413C:8158.0004: input,hidraw3: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0 [ 22.109523] usbcore: registered new interface driver usbhid [ 22.109524] usbhid: USB HID core driver [ 22.323252] ath9k 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21 [ 22.323262] ath9k 0000:06:00.0: setting latency timer to 64 [ 22.756976] ath: EEPROM regdomain: 0x60 [ 22.756978] ath: EEPROM indicates we should expect a direct regpair map [ 22.756981] ath: Country alpha2 being used: 00 [ 22.756982] ath: Regpair used: 0x60 [ 22.756985] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 22.756988] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.756989] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 22.756992] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.756994] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 22.756996] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.756998] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 22.757000] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757002] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 22.757004] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757006] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 22.757009] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757010] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 22.757013] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757015] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 22.757017] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757019] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 22.757021] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757023] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 22.757026] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757028] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 22.757030] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757032] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 22.757034] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757036] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 22.757038] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757040] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 22.757042] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 22.757044] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 22.757047] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757049] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 22.757051] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757053] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 22.757055] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757057] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 22.757059] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757061] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 22.757064] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757065] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 22.757068] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757070] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 22.757072] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757074] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 22.757076] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757078] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 22.757080] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757082] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 22.757084] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757086] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 22.757089] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757090] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 22.757093] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757095] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 22.757097] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757099] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule: [ 22.757101] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757103] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule: [ 22.757106] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757107] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule: [ 22.757110] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757112] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 22.757114] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757116] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 22.757118] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757120] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 22.757122] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757124] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 22.757127] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757129] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 22.757131] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757133] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 22.757135] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757137] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 22.757139] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.757141] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 22.757143] cfg80211: 5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm) [ 22.763348] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 22.951241] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 22.951708] Registered led device: ath9k-phy0 [ 22.951714] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90001a40000, irq=21 [ 23.047670] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 23.093082] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input15 [ 23.228051] nvidia: module license 'NVIDIA' taints kernel. [ 23.228054] Disabling lock debugging due to kernel taint [ 23.436643] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18 [ 23.436649] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18 [ 23.436676] nvidia 0000:02:00.0: enabling device (0004 -> 0007) [ 23.436687] nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23 [ 23.436698] nvidia 0000:02:00.0: setting latency timer to 64 [ 23.436708] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none [ 23.436940] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23 [ 23.436943] nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23 [ 23.436947] nvidia 0000:03:00.0: setting latency timer to 64 [ 23.436950] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 23.437371] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 [ 23.475935] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 23.475940] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 23.476068] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17 [ 23.476079] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17 [ 23.476081] hda_intel: Disabling MSI [ 23.476115] snd_hda_intel 0000:00:08.0: setting latency timer to 64 [ 23.621507] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 23.803932] init: failsafe main process (922) killed by TERM signal [ 23.989740] type=1400 audit(1340230996.553:8): apparmor="STATUS" operation="profile_load" name="/opt/extras.ubuntu.com/unity-lens-utilities/unity-lens-utilities" pid=1013 comm="apparmor_parser" [ 23.991654] type=1400 audit(1340230996.553:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1012 comm="apparmor_parser" [ 23.993481] type=1400 audit(1340230996.557:10): apparmor="STATUS" operation="profile_load" name="/opt/extras.ubuntu.com/unity-scope-calculator/unity-scope-calculator" pid=1014 comm="apparmor_parser" [ 23.995312] type=1400 audit(1340230996.557:11): apparmor="STATUS" operation="profile_load" name="/opt/extras.ubuntu.com/unity-scope-cities/unity-scope-cities" pid=1015 comm="apparmor_parser" [ 23.998928] forcedeth 0000:00:0a.0: eth0: no link during initialization [ 23.999712] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.000095] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.043757] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.044382] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.076308] ppdev: user-space parallel port driver [ 24.140820] Bluetooth: Core ver 2.16 [ 24.140836] NET: Registered protocol family 31 [ 24.140838] Bluetooth: HCI device and connection manager initialized [ 24.140840] Bluetooth: HCI socket layer initialized [ 24.140842] Bluetooth: L2CAP socket layer initialized [ 24.141020] Bluetooth: SCO socket layer initialized [ 24.154591] Bluetooth: RFCOMM TTY layer initialized [ 24.154595] Bluetooth: RFCOMM socket layer initialized [ 24.154596] Bluetooth: RFCOMM ver 1.11 [ 24.204210] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.204213] Bluetooth: BNEP filters: protocol multicast [ 24.386654] init: alsa-restore main process (1085) terminated with status 19 [ 24.422281] init: whoopsie main process (1098) terminated with status 1 [ 24.422302] init: whoopsie main process ended, respawning [ 26.539312] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000 [ 27.540030] hda-intel: Codec #1 probe error; disabling it... [ 29.068165] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input16 [ 29.313348] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 29.313350] vesafb: scrolling: redraw [ 29.313353] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 29.316194] vesafb: framebuffer at 0xcb000000, mapped to 0xffffc90002100000, using 1216k, total 1216k [ 29.316480] Console: switching to colour frame buffer device 80x30 [ 29.316490] fb0: VESA VGA frame buffer device [ 33.167653] wlan0: authenticate with 00:1e:74:5e:c7:8f (try 1) [ 33.169610] wlan0: authenticated [ 33.169749] wlan0: associate with 00:1e:74:5e:c7:8f (try 1) [ 33.172248] wlan0: RX AssocResp from 00:1e:74:5e:c7:8f (capab=0x411 status=0 aid=2) [ 33.172250] wlan0: associated [ 33.173494] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 43.248045] wlan0: no IPv6 routers present [ 1429.745323] wlan0: deauthenticating from 00:1e:74:5e:c7:8f by local choice (reason=3) [ 1429.937460] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1429.937467] cfg80211: Restoring regulatory settings [ 1429.937489] cfg80211: Calling CRDA to update world regulatory domain [ 1429.940745] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1429.940749] cfg80211: World regulatory domain updated: [ 1429.940750] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1429.940753] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1429.940755] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1429.940757] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1429.940759] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1429.940762] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1438.101571] PM: Syncing filesystems ... done. [ 1438.115145] PM: Preparing system for mem sleep [ 1438.115159] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 1438.128057] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1438.144131] PM: Entering mem sleep [ 1438.144156] Suspending console(s) (use no_console_suspend to debug) [ 1438.144904] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1438.145285] sd 0:0:0:0: [sda] Stopping disk [ 1438.203914] ACPI handle has no context! [ 1438.204384] ohci_hcd 0000:00:04.0: PCI INT A disabled [ 1438.204965] sdhci-pci 0000:01:07.1: PCI INT B disabled [ 1438.244145] ehci_hcd 0000:00:06.1: PCI INT B disabled [ 1438.268033] ehci_hcd 0000:00:04.1: PCI INT B disabled [ 1438.280068] ohci_hcd 0000:00:06.0: PCI INT A disabled [ 1438.492048] snd_hda_intel 0000:00:08.0: PCI INT A disabled [ 1438.508147] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3 [ 1438.508154] PM: suspend of drv:snd_hda_intel dev:0000:00:08.0 complete after 303.853 msecs [ 1439.145028] PM: suspend of drv:sd dev:0:0:0:0 complete after 1000.126 msecs [ 1439.145061] PM: suspend of drv:scsi dev:target0:0:0 complete after 999.925 msecs [ 1439.145120] PM: suspend of drv:scsi dev:host0 complete after 944.697 msecs [ 1439.160066] PM: suspend of drv:ahci dev:0000:00:0b.0 complete after 956.093 msecs [ 1439.160101] PM: suspend of drv: dev:pci0000:00 complete after 955.343 msecs [ 1439.160144] PM: suspend of devices complete after 1015.679 msecs [ 1439.160147] PM: suspend devices took 1.016 seconds [ 1439.224194] ehci_hcd 0000:00:06.1: PME# enabled [ 1439.224204] ehci_hcd 0000:00:06.1: wake-up capability enabled by ACPI [ 1439.240172] ohci_hcd 0000:00:06.0: PME# enabled [ 1439.240179] ohci_hcd 0000:00:06.0: wake-up capability enabled by ACPI [ 1439.256174] ehci_hcd 0000:00:04.1: PME# enabled [ 1439.256180] ehci_hcd 0000:00:04.1: wake-up capability enabled by ACPI [ 1439.272172] ohci_hcd 0000:00:04.0: PME# enabled [ 1439.272179] ohci_hcd 0000:00:04.0: wake-up capability enabled by ACPI [ 1439.288517] PM: late suspend of devices complete after 128.366 msecs [ 1439.289095] ACPI: Preparing to enter system sleep state S3 [ 1439.324291] PM: Saving platform NVS memory [ 1439.324441] Disabling non-boot CPUs ... [ 1439.428099] CPU 1 is now offline [ 1439.428582] Extended CMOS year: 2000 [ 1439.428582] ACPI: Low-level resume complete [ 1439.428582] PM: Restoring platform NVS memory [ 1439.428582] CPU0: Thermal monitoring handled by SMI [ 1439.428582] Extended CMOS year: 2000 [ 1439.428582] Enabling non-boot CPUs ... [ 1439.428582] Booting Node 0 Processor 1 APIC 0x1 [ 1439.428582] smpboot cpu 1: start_ip = 98000 [ 1439.325913] Calibrating delay loop (skipped) already calibrated this CPU [ 1439.325913] CPU1: Thermal monitoring handled by SMI [ 1439.441480] NMI watchdog enabled, takes one hw-pmu counter. [ 1439.444143] CPU1 is up [ 1439.447407] ACPI: Waking up from system sleep state S3 [ 1439.480679] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) [ 1439.480691] ohci_hcd 0000:00:04.0: wake-up capability disabled by ACPI [ 1439.480695] ohci_hcd 0000:00:04.0: PME# disabled [ 1439.480713] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [ 1439.480727] ehci_hcd 0000:00:04.1: wake-up capability disabled by ACPI [ 1439.480730] ehci_hcd 0000:00:04.1: PME# disabled [ 1439.480746] ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) [ 1439.480756] ohci_hcd 0000:00:06.0: wake-up capability disabled by ACPI [ 1439.480759] ohci_hcd 0000:00:06.0: PME# disabled [ 1439.480777] ehci_hcd 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [ 1439.480790] ehci_hcd 0000:00:06.1: wake-up capability disabled by ACPI [ 1439.480794] ehci_hcd 0000:00:06.1: PME# disabled [ 1439.480809] snd_hda_intel 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [ 1439.480873] ahci 0000:00:0b.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00407) [ 1439.481308] pcieport 0000:00:16.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1) [ 1439.481725] firewire_ohci 0000:01:07.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010a) [ 1439.481738] firewire_ohci 0000:01:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000) [ 1439.481741] firewire_ohci 0000:01:07.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 1439.481746] firewire_ohci 0000:01:07.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1439.481758] firewire_ohci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 1439.481760] firewire_ohci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller [ 1439.481769] sdhci-pci 0000:01:07.1: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 1439.481781] sdhci-pci 0000:01:07.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500800) [ 1439.481785] sdhci-pci 0000:01:07.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 1439.481789] sdhci-pci 0000:01:07.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1439.481804] r592 0000:01:07.2: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 1439.481816] r592 0000:01:07.2: restoring config space at offset 0x4 (was 0x0, writing 0xf0501000) [ 1439.481820] r592 0000:01:07.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 1439.481824] r592 0000:01:07.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1439.481839] r852 0000:01:07.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 1439.481851] r852 0000:01:07.3: restoring config space at offset 0x4 (was 0x0, writing 0xf0501400) [ 1439.481855] r852 0000:01:07.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 1439.481859] r852 0000:01:07.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1439.481916] nvidia 0000:02:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 1439.481922] nvidia 0000:02:00.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100007) [ 1439.481970] nvidia 0000:03:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 1439.481997] ath9k 0000:06:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 1439.482012] ath9k 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004) [ 1439.482016] ath9k 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 1439.482021] ath9k 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 1439.482534] PM: early resume of devices complete after 2.274 msecs [ 1439.482669] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 1439.482675] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1439.482691] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23 [ 1439.482696] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 1439.482712] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 22 (level, low) -> IRQ 22 [ 1439.482718] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 1439.482731] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21 [ 1439.482737] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 1439.482774] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 1439.482778] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 1439.482783] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 1439.482786] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 1439.482792] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17 [ 1439.482798] snd_hda_intel 0000:00:08.0: setting latency timer to 64 [ 1439.482830] pci 0000:00:09.0: setting latency timer to 64 [ 1439.483101] ahci 0000:00:0b.0: setting latency timer to 64 [ 1439.483134] pci 0000:00:10.0: setting latency timer to 64 [ 1439.483221] sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 1439.483224] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1439.497403] sd 0:0:0:0: [sda] Starting disk [ 1439.536138] firewire_core: skipped bus generations, destroying all nodes [ 1439.640038] PM: resume of drv:hub dev:2-0:1.0 complete after 149.822 msecs [ 1439.640046] PM: resume of drv: dev:ep_00 complete after 149.824 msecs [ 1439.640064] PM: resume of drv: dev:ep_81 complete after 149.846 msecs [ 1439.656057] PM: resume of drv:hub dev:1-0:1.0 complete after 165.858 msecs [ 1439.656066] PM: resume of drv: dev:ep_00 complete after 165.858 msecs [ 1439.656072] PM: resume of drv: dev:ep_81 complete after 165.869 msecs [ 1439.692033] PM: resume of drv:hub dev:3-0:1.0 complete after 194.739 msecs [ 1439.692039] PM: resume of drv: dev:ep_00 complete after 194.715 msecs [ 1439.692056] PM: resume of drv: dev:ep_81 complete after 194.746 msecs [ 1439.752033] usb 2-3: reset high-speed USB device number 2 using ehci_hcd [ 1439.808041] ata3: SATA link down (SStatus 0 SControl 300) [ 1439.808067] ata4: SATA link down (SStatus 0 SControl 300) [ 1439.808094] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1439.808114] ata6: SATA link down (SStatus 0 SControl 300) [ 1439.808134] ata5: SATA link down (SStatus 0 SControl 300) [ 1439.834775] ata2.00: configured for UDMA/100 [ 1439.961212] PM: resume of drv:uvcvideo dev:2-3:1.0 complete after 463.721 msecs [ 1439.961219] PM: resume of drv:uvcvideo dev:2-3:1.1 complete after 463.700 msecs [ 1439.961224] PM: resume of drv: dev:ep_00 complete after 463.690 msecs [ 1439.961229] PM: resume of drv: dev:ep_83 complete after 463.725 msecs [ 1440.004263] PM: resume of drv:forcedeth dev:0000:00:0a.0 complete after 521.427 msecs [ 1440.054100] PM: resume of drv:nvidia dev:0000:03:00.0 complete after 570.603 msecs [ 1440.054275] firewire_core: rediscovered device fw0 [ 1440.060062] usb 3-1: reset full-speed USB device number 2 using ohci_hcd [ 1440.116108] PM: resume of drv:battery dev:PNP0C0A:00 complete after 633.282 msecs [ 1440.273096] PM: resume of drv:usbhid dev:3-1:1.0 complete after 775.532 msecs [ 1440.273103] PM: resume of drv: dev:ep_00 complete after 775.472 msecs [ 1440.273107] PM: resume of drv:usbhid dev:3-1:1.1 complete after 775.515 msecs [ 1440.273112] PM: resume of drv: dev:ep_81 complete after 775.535 msecs [ 1440.273122] PM: resume of drv: dev:ep_82 complete after 775.516 msecs [ 1440.432062] usb 3-4: reset full-speed USB device number 3 using ohci_hcd [ 1440.868074] PM: resume of drv: dev:ep_00 complete after 1370.391 msecs [ 1440.868081] PM: resume of drv:hub dev:3-4:1.0 complete after 1370.428 msecs [ 1440.868112] PM: resume of drv: dev:ep_81 complete after 1370.444 msecs [ 1440.946082] usb 3-4.2: reset full-speed USB device number 5 using ohci_hcd [ 1441.053157] PM: resume of drv: dev:ep_00 complete after 1555.352 msecs [ 1441.053165] PM: resume of drv:usb dev:3-4.2:1.0 complete after 1555.389 msecs [ 1441.053194] PM: resume of drv: dev:ep_81 complete after 1555.403 msecs [ 1441.114070] usb 3-4.1: reset full-speed USB device number 4 using ohci_hcd [ 1441.222154] PM: resume of drv: dev:ep_00 complete after 1724.409 msecs [ 1441.222161] PM: resume of drv:usbhid dev:3-4.1:1.0 complete after 1724.448 msecs [ 1441.222193] PM: resume of drv: dev:ep_81 complete after 1724.462 msecs [ 1443.448124] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1443.453159] ata1.00: configured for UDMA/133 [ 1443.482724] PM: resume of drv:sd dev:0:0:0:0 complete after 3985.316 msecs [ 1443.482736] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 3316.728 msecs [ 1443.482743] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3985.301 msecs [ 1443.487692] PM: resume of devices complete after 4005.131 msecs [ 1443.487814] PM: resume devices took 4.004 seconds [ 1443.487837] PM: Finishing wakeup. [ 1443.487838] Restarting tasks ... done. [ 1443.720174] video LNXVIDEO:00: Restoring backlight state [ 1443.746899] video LNXVIDEO:01: Restoring backlight state [ 1445.046063] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [ 1445.046280] forcedeth 0000:00:0a.0: eth0: no link during initialization [ 1445.047090] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1445.136849] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1454.355197] wlan0: authenticate with 00:1e:74:5e:c7:8f (try 1) [ 1454.357186] wlan0: authenticated [ 1454.376779] wlan0: associate with 00:1e:74:5e:c7:8f (try 1) [ 1454.379306] wlan0: RX AssocResp from 00:1e:74:5e:c7:8f (capab=0x411 status=0 aid=1) [ 1454.379310] wlan0: associated [ 1454.379833] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1464.824333] wlan0: no IPv6 routers present [ 1583.922795] init: cron main process (1102) killed by TERM signal [ 1804.059175] init: anacron main process (4110) killed by TERM signal [ 5492.726649] wlan0: deauthenticating from 00:1e:74:5e:c7:8f by local choice (reason=3) [ 5492.920209] cfg80211: All devices are disconnected, going to restore regulatory settings [ 5492.920216] cfg80211: Restoring regulatory settings [ 5492.920893] cfg80211: Calling CRDA to update world regulatory domain [ 5492.925924] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 5492.925927] cfg80211: World regulatory domain updated: [ 5492.925929] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5492.925931] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5492.925933] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5492.925935] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5492.925938] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5492.925940] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5501.033657] PM: Syncing filesystems ... done. [ 5501.050420] PM: Preparing system for mem sleep [ 5501.050434] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 5501.064068] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 5501.080061] PM: Entering mem sleep [ 5501.080084] Suspending console(s) (use no_console_suspend to debug) [ 5501.080823] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5501.081198] sd 0:0:0:0: [sda] Stopping disk [ 5501.137149] sdhci-pci 0000:01:07.1: PCI INT B disabled [ 5501.137197] ACPI handle has no context! [ 5501.137693] ohci_hcd 0000:00:04.0: PCI INT A disabled [ 5501.168027] ehci_hcd 0000:00:06.1: PCI INT B disabled [ 5501.192047] ehci_hcd 0000:00:04.1: PCI INT B disabled [ 5501.204071] ohci_hcd 0000:00:06.0: PCI INT A disabled [ 5501.304050] snd_hda_intel 0000:00:08.0: PCI INT A disabled [ 5501.320080] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3 [ 5501.320086] PM: suspend of drv:snd_hda_intel dev:0000:00:08.0 complete after 182.476 msecs [ 5502.081194] PM: suspend of drv:sd dev:0:0:0:0 complete after 1000.373 msecs [ 5502.081228] PM: suspend of drv:scsi dev:target0:0:0 complete after 1000.366 msecs [ 5502.081260] PM: suspend of drv:scsi dev:host0 complete after 953.541 msecs [ 5502.096122] PM: suspend of drv:ahci dev:0000:00:0b.0 complete after 958.844 msecs [ 5502.096155] PM: suspend of drv: dev:pci0000:00 complete after 958.402 msecs [ 5502.096186] PM: suspend of devices complete after 1015.781 msecs [ 5502.096189] PM: suspend devices took 1.016 seconds [ 5502.160169] ehci_hcd 0000:00:06.1: PME# enabled [ 5502.160179] ehci_hcd 0000:00:06.1: wake-up capability enabled by ACPI [ 5502.176146] ohci_hcd 0000:00:06.0: PME# enabled [ 5502.176153] ohci_hcd 0000:00:06.0: wake-up capability enabled by ACPI [ 5502.192148] ehci_hcd 0000:00:04.1: PME# enabled [ 5502.192155] ehci_hcd 0000:00:04.1: wake-up capability enabled by ACPI [ 5502.208146] ohci_hcd 0000:00:04.0: PME# enabled [ 5502.208153] ohci_hcd 0000:00:04.0: wake-up capability enabled by ACPI [ 5502.224495] PM: late suspend of devices complete after 128.302 msecs [ 5502.225073] ACPI: Preparing to enter system sleep state S3 [ 5502.260261] PM: Saving platform NVS memory [ 5502.260421] Disabling non-boot CPUs ... [ 5502.364099] CPU 1 is now offline [ 5502.364562] Extended CMOS year: 2000 [ 5502.364562] ACPI: Low-level resume complete [ 5502.364562] PM: Restoring platform NVS memory [ 5502.364562] CPU0: Thermal monitoring handled by SMI [ 5502.364562] Extended CMOS year: 2000 [ 5502.364562] Enabling non-boot CPUs ... [ 5502.364562] Booting Node 0 Processor 1 APIC 0x1 [ 5502.364562] smpboot cpu 1: start_ip = 98000 [ 5502.261811] Calibrating delay loop (skipped) already calibrated this CPU [ 5502.261811] CPU1: Thermal monitoring handled by SMI [ 5502.377651] NMI watchdog enabled, takes one hw-pmu counter. [ 5502.380143] CPU1 is up [ 5502.383404] ACPI: Waking up from system sleep state S3 [ 5502.424669] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) [ 5502.424681] ohci_hcd 0000:00:04.0: wake-up capability disabled by ACPI [ 5502.424685] ohci_hcd 0000:00:04.0: PME# disabled [ 5502.424703] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [ 5502.424717] ehci_hcd 0000:00:04.1: wake-up capability disabled by ACPI [ 5502.424720] ehci_hcd 0000:00:04.1: PME# disabled [ 5502.424736] ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) [ 5502.424746] ohci_hcd 0000:00:06.0: wake-up capability disabled by ACPI [ 5502.424749] ohci_hcd 0000:00:06.0: PME# disabled [ 5502.424767] ehci_hcd 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [ 5502.424780] ehci_hcd 0000:00:06.1: wake-up capability disabled by ACPI [ 5502.424783] ehci_hcd 0000:00:06.1: PME# disabled [ 5502.424799] snd_hda_intel 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [ 5502.424862] ahci 0000:00:0b.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00407) [ 5502.425710] firewire_ohci 0000:01:07.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010a) [ 5502.425723] firewire_ohci 0000:01:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000) [ 5502.425727] firewire_ohci 0000:01:07.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 5502.425731] firewire_ohci 0000:01:07.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 5502.425743] firewire_ohci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 5502.425745] firewire_ohci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller [ 5502.425754] sdhci-pci 0000:01:07.1: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 5502.425766] sdhci-pci 0000:01:07.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500800) [ 5502.425770] sdhci-pci 0000:01:07.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 5502.425775] sdhci-pci 0000:01:07.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 5502.425789] r592 0000:01:07.2: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 5502.425801] r592 0000:01:07.2: restoring config space at offset 0x4 (was 0x0, writing 0xf0501000) [ 5502.425805] r592 0000:01:07.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 5502.425810] r592 0000:01:07.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 5502.425824] r852 0000:01:07.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 5502.425837] r852 0000:01:07.3: restoring config space at offset 0x4 (was 0x0, writing 0xf0501400) [ 5502.425840] r852 0000:01:07.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 5502.425845] r852 0000:01:07.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 5502.425901] nvidia 0000:02:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 5502.425908] nvidia 0000:02:00.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100007) [ 5502.425956] nvidia 0000:03:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 5502.425983] ath9k 0000:06:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 5502.425998] ath9k 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004) [ 5502.426002] ath9k 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5502.426007] ath9k 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5502.426520] PM: early resume of devices complete after 2.271 msecs [ 5502.426657] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 5502.426663] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 5502.426680] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23 [ 5502.426685] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 5502.426700] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 22 (level, low) -> IRQ 22 [ 5502.426705] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 5502.426718] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21 [ 5502.426723] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 5502.426759] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 5502.426763] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 5502.426769] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 5502.426772] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [ 5502.426777] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17 [ 5502.426783] snd_hda_intel 0000:00:08.0: setting latency timer to 64 [ 5502.426815] pci 0000:00:09.0: setting latency timer to 64 [ 5502.427086] ahci 0000:00:0b.0: setting latency timer to 64 [ 5502.427120] pci 0000:00:10.0: setting latency timer to 64 [ 5502.427152] sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 5502.427155] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 5502.441378] sd 0:0:0:0: [sda] Starting disk [ 5502.480120] firewire_core: skipped bus generations, destroying all nodes [ 5502.584036] PM: resume of drv:hub dev:2-0:1.0 complete after 149.806 msecs [ 5502.584042] PM: resume of drv: dev:ep_00 complete after 149.806 msecs [ 5502.584060] PM: resume of drv: dev:ep_81 complete after 149.828 msecs [ 5502.600057] PM: resume of drv:hub dev:1-0:1.0 complete after 165.843 msecs [ 5502.600066] PM: resume of drv: dev:ep_00 complete after 165.846 msecs [ 5502.600073] PM: resume of drv: dev:ep_81 complete after 165.856 msecs [ 5502.636036] PM: resume of drv:hub dev:3-0:1.0 complete after 201.792 msecs [ 5502.636042] PM: resume of drv: dev:ep_00 complete after 194.740 msecs [ 5502.636057] PM: resume of drv: dev:ep_81 complete after 201.810 msecs [ 5502.696031] usb 2-3: reset high-speed USB device number 2 using ehci_hcd [ 5502.760048] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5502.760071] ata5: SATA link down (SStatus 0 SControl 300) [ 5502.760094] ata6: SATA link down (SStatus 0 SControl 300) [ 5502.760114] ata4: SATA link down (SStatus 0 SControl 300) [ 5502.760134] ata3: SATA link down (SStatus 0 SControl 300) [ 5502.788260] ata2.00: configured for UDMA/100 [ 5502.906215] PM: resume of drv:uvcvideo dev:2-3:1.0 complete after 464.751 msecs [ 5502.906222] PM: resume of drv:uvcvideo dev:2-3:1.1 complete after 464.730 msecs [ 5502.906227] PM: resume of drv: dev:ep_00 complete after 464.721 msecs [ 5502.906233] PM: resume of drv: dev:ep_83 complete after 464.755 msecs [ 5502.948251] PM: resume of drv:forcedeth dev:0000:00:0a.0 complete after 521.430 msecs [ 5502.997932] PM: resume of drv:nvidia dev:0000:03:00.0 complete after 570.439 msecs [ 5502.998106] firewire_core: rediscovered device fw0 [ 5503.004057] usb 3-1: reset full-speed USB device number 2 using ohci_hcd [ 5503.068109] PM: resume of drv:battery dev:PNP0C0A:00 complete after 641.300 msecs [ 5503.126660] Extended CMOS year: 2000 [ 5503.216142] PM: resume of drv:usbhid dev:3-1:1.0 complete after 774.604 msecs [ 5503.216148] PM: resume of drv: dev:ep_00 complete after 774.544 msecs [ 5503.216154] PM: resume of drv: dev:ep_81 complete after 774.603 msecs [ 5503.216159] PM: resume of drv:usbhid dev:3-1:1.1 complete after 774.588 msecs [ 5503.216178] PM: resume of drv: dev:ep_82 complete after 774.595 msecs [ 5503.376037] usb 3-4: reset full-speed USB device number 3 using ohci_hcd [ 5503.812060] PM: resume of drv: dev:ep_00 complete after 1370.402 msecs [ 5503.812071] PM: resume of drv:hub dev:3-4:1.0 complete after 1370.444 msecs [ 5503.812095] PM: resume of drv: dev:ep_81 complete after 1370.451 msecs [ 5503.890072] usb 3-4.1: reset full-speed USB device number 4 using ohci_hcd [ 5504.003090] PM: resume of drv: dev:ep_00 complete after 1561.371 msecs [ 5504.003097] PM: resume of drv:usbhid dev:3-4.1:1.0 complete after 1561.411 msecs [ 5504.003201] PM: resume of drv: dev:ep_81 complete after 1561.499 msecs [ 5504.062069] usb 3-4.2: reset full-speed USB device number 5 using ohci_hcd [ 5504.167149] PM: resume of drv: dev:ep_00 complete after 1725.372 msecs [ 5504.167156] PM: resume of drv:usb dev:3-4.2:1.0 complete after 1725.409 msecs [ 5504.167179] PM: resume of drv: dev:ep_81 complete after 1725.417 msecs [ 5506.400042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5506.405112] ata1.00: configured for UDMA/133 [ 5506.428616] PM: resume of drv:sd dev:0:0:0:0 complete after 3987.234 msecs [ 5506.428638] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 3301.940 msecs [ 5506.428779] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3987.364 msecs [ 5506.436422] PM: resume of devices complete after 4009.866 msecs [ 5506.436538] PM: resume devices took 4.012 seconds [ 5506.436560] PM: Finishing wakeup. [ 5506.436561] Restarting tasks ... done. [ 5506.652177] video LNXVIDEO:00: Restoring backlight state [ 5506.679902] video LNXVIDEO:01: Restoring backlight state [ 5507.844786] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [ 5507.845004] forcedeth 0000:00:0a.0: eth0: no link during initialization [ 5507.845815] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5507.932392] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5517.074318] wlan0: authenticate with 00:1e:74:5e:c7:8f (try 1) [ 5517.076264] wlan0: authenticated [ 5517.095602] wlan0: associate with 00:1e:74:5e:c7:8f (try 1) [ 5517.098598] wlan0: RX AssocResp from 00:1e:74:5e:c7:8f (capab=0x411 status=0 aid=2) [ 5517.098601] wlan0: associated [ 5517.099113] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5528.048043] wlan0: no IPv6 routers present [ 6589.532147] CE: hpet increased min_delta_ns to 11520 nsec [36031.853736] wlan0: deauthenticating from 00:1e:74:5e:c7:8f by local choice (reason=3) [36032.053928] cfg80211: All devices are disconnected, going to restore regulatory settings [36032.053935] cfg80211: Restoring regulatory settings [36032.054598] cfg80211: Calling CRDA to update world regulatory domain [36032.059878] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [36032.059882] cfg80211: World regulatory domain updated: [36032.059885] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [36032.059889] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [36032.059893] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [36032.059896] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [36032.059900] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [36032.059903] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [36037.002170] init: anacron main process (9751) killed by TERM signal [36040.311021] PM: Syncing filesystems ... done. [36040.328332] PM: Preparing system for mem sleep [36040.328346] Freezing user space processes ... (elapsed 0.01 seconds) done. [36040.344070] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [36040.360143] PM: Entering mem sleep [36040.360165] Suspending console(s) (use no_console_suspend to debug) [36040.360970] sd 0:0:0:0: [sda] Synchronizing SCSI cache [36040.361339] sd 0:0:0:0: [sda] Stopping disk [36040.421107] sdhci-pci 0000:01:07.1: PCI INT B disabled [36040.421158] ACPI handle has no context! [36040.421659] ohci_hcd 0000:00:04.0: PCI INT A disabled [36040.452055] ehci_hcd 0000:00:06.1: PCI INT B disabled [36040.476037] ehci_hcd 0000:00:04.1: PCI INT B disabled [36040.488171] ohci_hcd 0000:00:06.0: PCI INT A disabled [36040.588050] snd_hda_intel 0000:00:08.0: PCI INT A disabled [36040.604079] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3 [36040.604085] PM: suspend of drv:snd_hda_intel dev:0000:00:08.0 complete after 182.520 msecs [36041.361533] PM: suspend of drv:sd dev:0:0:0:0 complete after 1000.565 msecs [36041.361566] PM: suspend of drv:scsi dev:target0:0:0 complete after 1000.425 msecs [36041.361598] PM: suspend of drv:scsi dev:host0 complete after 953.100 msecs [36041.376075] PM: suspend of drv:ahci dev:0000:00:0b.0 complete after 954.835 msecs [36041.376107] PM: suspend of drv: dev:pci0000:00 complete after 954.388 msecs [36041.376115] PM: suspend of devices complete after 1015.644 msecs [36041.376118] PM: suspend devices took 1.016 seconds [36041.440171] ehci_hcd 0000:00:06.1: PME# enabled [36041.440181] ehci_hcd 0000:00:06.1: wake-up capability enabled by ACPI [36041.456150] ohci_hcd 0000:00:06.0: PME# enabled [36041.456157] ohci_hcd 0000:00:06.0: wake-up capability enabled by ACPI [36041.472150] ehci_hcd 0000:00:04.1: PME# enabled [36041.472157] ehci_hcd 0000:00:04.1: wake-up capability enabled by ACPI [36041.488149] ohci_hcd 0000:00:04.0: PME# enabled [36041.488156] ohci_hcd 0000:00:04.0: wake-up capability enabled by ACPI [36041.504499] PM: late suspend of devices complete after 128.378 msecs [36041.505077] ACPI: Preparing to enter system sleep state S3 [36041.540260] PM: Saving platform NVS memory [36041.540414] Disabling non-boot CPUs ... [36041.644100] CPU 1 is now offline [36041.644575] Extended CMOS year: 2000 [36041.644575] ACPI: Low-level resume complete [36041.644575] PM: Restoring platform NVS memory [36041.644575] CPU0: Thermal monitoring handled by SMI [36041.644575] Extended CMOS year: 2000 [36041.644575] Enabling non-boot CPUs ... [36041.644575] Booting Node 0 Processor 1 APIC 0x1 [36041.644575] smpboot cpu 1: start_ip = 98000 [36041.541823] Calibrating delay loop (skipped) already calibrated this CPU [36041.541823] CPU1: Thermal monitoring handled by SMI [36041.657473] NMI watchdog enabled, takes one hw-pmu counter. [36041.660145] CPU1 is up [36041.663405] ACPI: Waking up from system sleep state S3 [36041.704725] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) [36041.704738] ohci_hcd 0000:00:04.0: wake-up capability disabled by ACPI [36041.704741] ohci_hcd 0000:00:04.0: PME# disabled [36041.704760] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [36041.704773] ehci_hcd 0000:00:04.1: wake-up capability disabled by ACPI [36041.704777] ehci_hcd 0000:00:04.1: PME# disabled [36041.704793] ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) [36041.704803] ohci_hcd 0000:00:06.0: wake-up capability disabled by ACPI [36041.704806] ohci_hcd 0000:00:06.0: PME# disabled [36041.704823] ehci_hcd 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [36041.704837] ehci_hcd 0000:00:06.1: wake-up capability disabled by ACPI [36041.704840] ehci_hcd 0000:00:06.1: PME# disabled [36041.704856] snd_hda_intel 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [36041.704919] ahci 0000:00:0b.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00407) [36041.705767] firewire_ohci 0000:01:07.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010a) [36041.705780] firewire_ohci 0000:01:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000) [36041.705783] firewire_ohci 0000:01:07.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [36041.705788] firewire_ohci 0000:01:07.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [36041.705800] firewire_ohci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function) [36041.705802] firewire_ohci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller [36041.705810] sdhci-pci 0000:01:07.1: restoring config space at offset 0xf (was 0x200, writing 0x20b) [36041.705823] sdhci-pci 0000:01:07.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500800) [36041.705827] sdhci-pci 0000:01:07.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [36041.705831] sdhci-pci 0000:01:07.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [36041.705846] r592 0000:01:07.2: restoring config space at offset 0xf (was 0x200, writing 0x20b) [36041.705858] r592 0000:01:07.2: restoring config space at offset 0x4 (was 0x0, writing 0xf0501000) [36041.705862] r592 0000:01:07.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [36041.705866] r592 0000:01:07.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [36041.705881] r852 0000:01:07.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [36041.705893] r852 0000:01:07.3: restoring config space at offset 0x4 (was 0x0, writing 0xf0501400) [36041.705897] r852 0000:01:07.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [36041.705901] r852 0000:01:07.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [36041.705958] nvidia 0000:02:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [36041.705965] nvidia 0000:02:00.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100007) [36041.706013] nvidia 0000:03:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [36041.706040] ath9k 0000:06:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [36041.706055] ath9k 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004) [36041.706059] ath9k 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [36041.706064] ath9k 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [36041.706577] PM: early resume of devices complete after 2.271 msecs [36041.706710] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [36041.706718] ohci_hcd 0000:00:04.0: setting latency timer to 64 [36041.706733] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23 [36041.706739] ehci_hcd 0000:00:04.1: setting latency timer to 64 [36041.706756] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 22 (level, low) -> IRQ 22 [36041.706754] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21 [36041.706763] ohci_hcd 0000:00:06.0: setting latency timer to 64 [36041.706758] ehci_hcd 0000:00:06.1: setting latency timer to 64 [36041.706793] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [36041.706797] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [36041.706803] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [36041.706807] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0 [36041.706813] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17 [36041.706818] snd_hda_intel 0000:00:08.0: setting latency timer to 64 [36041.706855] pci 0000:00:09.0: setting latency timer to 64 [36041.707163] ahci 0000:00:0b.0: setting latency timer to 64 [36041.707202] pci 0000:00:10.0: setting latency timer to 64 [36041.707295] sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [36041.707298] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [36041.721516] sd 0:0:0:0: [sda] Starting disk [36041.812117] firewire_core: skipped bus generations, destroying all nodes [36041.860088] PM: resume of drv: dev:ep_00 complete after 138.708 msecs [36041.860110] PM: resume of drv:hub dev:2-0:1.0 complete after 138.743 msecs [36041.860118] PM: resume of drv: dev:ep_81 complete after 138.745 msecs [36041.876062] PM: resume of drv: dev:ep_00 complete after 154.702 msecs [36041.876132] PM: resume of drv:hub dev:1-0:1.0 complete after 154.787 msecs [36041.876141] PM: resume of drv: dev:ep_81 complete after 154.790 msecs [36041.912041] PM: resume of drv:hub dev:3-0:1.0 complete after 190.649 msecs [36041.912055] PM: resume of drv: dev:ep_81 complete after 190.657 msecs [36041.912069] PM: resume of drv: dev:ep_00 complete after 190.663 msecs [36041.972045] usb 2-3: reset high-speed USB device number 2 using ehci_hcd [36042.032041] ata3: SATA link down (SStatus 0 SControl 300) [36042.032066] ata6: SATA link down (SStatus 0 SControl 300) [36042.032085] ata5: SATA link down (SStatus 0 SControl 300) [36042.032108] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [36042.032129] ata4: SATA link down (SStatus 0 SControl 300) [36042.058741] ata2.00: configured for UDMA/100 [36042.181279] PM: resume of drv:uvcvideo dev:2-3:1.0 complete after 459.668 msecs [36042.181286] PM: resume of drv: dev:ep_00 complete after 459.619 msecs [36042.181291] PM: resume of drv: dev:ep_83 complete after 459.658 msecs [36042.181299] PM: resume of drv:uvcvideo dev:2-3:1.1 complete after 459.649 msecs [36042.228296] PM: resume of drv:forcedeth dev:0000:00:0a.0 complete after 521.434 msecs [36042.277294] PM: resume of drv:nvidia dev:0000:03:00.0 complete after 569.756 msecs [36042.280060] usb 3-4: reset full-speed USB device number 3 using ohci_hcd [36042.312176] firewire_core: rediscovered device fw0 [36042.324122] PM: resume of drv:battery dev:PNP0C0A:00 complete after 616.983 msecs [36042.390935] Extended CMOS year: 2000 [36042.652157] usb 3-1: reset full-speed USB device number 2 using ohci_hcd [36042.716115] PM: resume of drv:hub dev:3-4:1.0 complete after 994.298 msecs [36042.716130] PM: resume of drv: dev:ep_00 complete after 994.278 msecs [36042.716143] PM: resume of drv: dev:ep_81 complete after 994.307 msecs [36042.866056] PM: resume of drv:usbhid dev:3-1:1.0 complete after 1144.350 msecs [36042.866061] PM: resume of drv: dev:ep_00 complete after 1144.281 msecs [36042.866066] PM: resume of drv: dev:ep_81 complete after 1144.342 msecs [36042.866069] PM: resume of drv:usbhid dev:3-1:1.1 complete after 1144.328 msecs [36042.866097] PM: resume of drv: dev:ep_82 complete after 1144.337 msecs [36042.922123] usb 3-4.2: reset full-speed USB device number 5 using ohci_hcd [36043.029051] PM: resume of drv: dev:ep_00 complete after 1307.055 msecs [36043.029063] PM: resume of drv:usb dev:3-4.2:1.0 complete after 1307.104 msecs [36043.029108] PM: resume of drv: dev:ep_81 complete after 1307.132 msecs [36043.090102] usb 3-4.1: reset full-speed USB device number 4 using ohci_hcd [36043.198124] PM: resume of drv: dev:ep_00 complete after 1476.199 msecs [36043.198131] PM: resume of drv:usbhid dev:3-4.1:1.0 complete after 1476.242 msecs [36043.198155] PM: resume of drv: dev:ep_81 complete after 1476.247 msecs [36045.728065] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [36045.733111] ata1.00: configured for UDMA/133 [36045.762141] PM: resume of drv:sd dev:0:0:0:0 complete after 4040.620 msecs [36045.762162] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 3371.191 msecs [36045.762335] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 4040.779 msecs [36045.767598] PM: resume of devices complete after 4060.994 msecs [36045.767749] PM: resume devices took 4.060 seconds [36045.767812] PM: Finishing wakeup. [36045.767813] Restarting tasks ... done. [36045.996253] video LNXVIDEO:00: Restoring backlight state [36046.067749] video LNXVIDEO:01: Restoring backlight state [36047.362012] init: anacron main process (10301) killed by TERM signal [36047.483451] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [36047.483669] forcedeth 0000:00:0a.0: eth0: no link during initialization [36047.484546] ADDRCONF(NETDEV_UP): eth0: link is not ready [36047.564688] ADDRCONF(NETDEV_UP): wlan0: link is not ready [36056.803191] wlan0: authenticate with 00:1e:74:5e:c7:8f (try 1) [36056.805101] wlan0: authenticated [36056.805276] wlan0: associate with 00:1e:74:5e:c7:8f (try 1) [36056.807759] wlan0: RX AssocResp from 00:1e:74:5e:c7:8f (capab=0x411 status=0 aid=3) [36056.807763] wlan0: associated [36056.808324] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [36067.144019] wlan0: no IPv6 routers present