[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=eb20c4c6-2a37-499f-88cb-6c7e48a0b582 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dff90000 (usable) [ 0.000000] BIOS-e820: 00000000dff90000 - 00000000dff9e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dff9e000 - 00000000dffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffde000 (reserved) [ 0.000000] BIOS-e820: 00000000dffe0000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dff90000 (usable) [ 0.000000] modified: 00000000dff90000 - 00000000dff9e000 (ACPI data) [ 0.000000] modified: 00000000dff9e000 - 00000000dffd0000 (ACPI NVS) [ 0.000000] modified: 00000000dffd0000 - 00000000dffde000 (reserved) [ 0.000000] modified: 00000000dffe0000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dff90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dff90000 page 4k [ 0.000000] kernel direct mapping tables up to dff90000 @ 10000-16000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 14000-1a000 [ 0.000000] RAMDISK: 377fd000 - 37feff5f [ 0.000000] ACPI: RSDP 00000000000fb630 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000dff90000 0003C (v01 A_M_I_ OEMRSDT 07000908 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000dff90200 00084 (v02 A_M_I_ OEMFACP 07000908 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000dff905c0 07C37 (v01 A0846 A0846000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000dff9e000 00040 [ 0.000000] ACPI: APIC 00000000dff90390 0006C (v01 A_M_I_ OEMAPIC 07000908 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dff90400 0003C (v01 A_M_I_ OEMMCFG 07000908 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000dff9e040 00080 (v01 A_M_I_ AMI_OEM 07000908 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000dff98200 00038 (v01 A_M_I_ OEMHPET 07000908 MSFT 00000097) [ 0.000000] ACPI: GSCI 00000000dff9e0c0 02024 (v01 A_M_I_ GMCHSCI 07000908 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 000000000003dfff] pages 24 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [00377fd000 - 0037feff5f] RAMDISK ==> [00377fd000 - 0037feff5f] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a284] BRK ==> [0001a2a000 - 0001a2a284] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dff90 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048351 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3823 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 899016 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dff90000 - 00000000dff9e000 [ 0.000000] PM: Registered nosave memory: 00000000dff9e000 - 00000000dffd0000 [ 0.000000] PM: Registered nosave memory: 00000000dffd0000 - 00000000dffde000 [ 0.000000] PM: Registered nosave memory: 00000000dffde000 - 00000000dffe0000 [ 0.000000] PM: Registered nosave memory: 00000000dffe0000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032119 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=eb20c4c6-2a37-499f-88cb-6c7e48a0b582 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4048788k/4718592k available (5409k kernel code, 525188k absent, 144616k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3359.419 MHz processor. [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6718.83 BogoMIPS (lpj=33594190) [ 0.000025] Security Framework initialized [ 0.000039] AppArmor: AppArmor initialized [ 0.000278] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011220] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011935] Mount-cache hash table entries: 256 [ 0.012040] Initializing cgroup subsys ns [ 0.012043] Initializing cgroup subsys cpuacct [ 0.012045] Initializing cgroup subsys memory [ 0.012051] Initializing cgroup subsys devices [ 0.012053] Initializing cgroup subsys freezer [ 0.012054] Initializing cgroup subsys net_cls [ 0.012068] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.012070] CPU: L2 cache: 3072K [ 0.012072] CPU 0/0x0 -> Node 0 [ 0.012073] CPU: Physical Processor ID: 0 [ 0.012074] CPU: Processor Core ID: 0 [ 0.012076] mce: CPU supports 6 MCE banks [ 0.012082] CPU0: Thermal monitoring enabled (TM2) [ 0.012085] using mwait in idle threads. [ 0.012086] Performance Events: Core2 events, Intel PMU driver. [ 0.012090] ... version: 2 [ 0.012091] ... bit width: 40 [ 0.012092] ... generic registers: 2 [ 0.012093] ... value mask: 000000ffffffffff [ 0.012094] ... max period: 000000007fffffff [ 0.012095] ... fixed-purpose events: 3 [ 0.012096] ... event mask: 0000000700000003 [ 0.014306] ACPI: Core revision 20090903 [ 0.030005] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030009] ftrace: allocating 22518 entries in 89 pages [ 0.036405] Setting APIC routing to flat [ 0.036699] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.139497] CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a [ 0.140000] APIC calibration not consistent with PM-Timer: 129ms instead of 100ms [ 0.140000] APIC delta adjusted to PM-Timer: 1999996 (2599977) [ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 3072K [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] CPU1: Thermal monitoring enabled (TM2) [ 0.290100] CPU1: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a [ 0.290105] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.300011] Brought up 2 CPUs [ 0.300013] Total of 2 processors activated (13438.85 BogoMIPS). [ 0.300427] CPU0 attaching sched-domain: [ 0.300429] domain 0: span 0-1 level MC [ 0.300430] groups: 0 1 [ 0.300435] CPU1 attaching sched-domain: [ 0.300436] domain 0: span 0-1 level MC [ 0.300437] groups: 1 0 [ 0.300502] devtmpfs: initialized [ 0.300502] regulator: core version 0.5 [ 0.300502] Time: 20:17:46 Date: 05/12/10 [ 0.300502] NET: Registered protocol family 16 [ 0.300502] Trying to unpack rootfs image as initramfs... [ 0.300502] ACPI: bus type pci registered [ 0.300502] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.300502] PCI: Not using MMCONFIG. [ 0.300502] PCI: Using configuration type 1 for base access [ 0.310093] bio: create slab at 0 [ 0.310608] ACPI: EC: Look up EC in DSDT [ 0.312377] ACPI: Executed 1 blocks of module-level executable AML code [ 0.316091] ACPI: Interpreter enabled [ 0.316094] ACPI: (supports S0 S1 S3 S4 S5) [ 0.316109] ACPI: Using IOAPIC for interrupt routing [ 0.316146] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.318232] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources [ 0.319576] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.324520] ACPI Warning: Incorrect checksum in table [OEMB] - 77, should be 72 (20090903/tbutils-314) [ 0.325131] ACPI: No dock devices found. [ 0.325208] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.325281] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.325283] pci 0000:00:01.0: PME# disabled [ 0.325331] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff] [ 0.325362] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.325364] pci 0000:00:1b.0: PME# disabled [ 0.325411] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.325413] pci 0000:00:1c.0: PME# disabled [ 0.325462] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.325465] pci 0000:00:1c.1: PME# disabled [ 0.325502] pci 0000:00:1d.0: reg 20 io port: [0xc480-0xc49f] [ 0.325538] pci 0000:00:1d.1: reg 20 io port: [0xc800-0xc81f] [ 0.325575] pci 0000:00:1d.2: reg 20 io port: [0xc880-0xc89f] [ 0.325612] pci 0000:00:1d.3: reg 20 io port: [0xcc00-0xcc1f] [ 0.325654] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8fbc00-0xfe8fbfff] [ 0.325693] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.325697] pci 0000:00:1d.7: PME# disabled [ 0.325793] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.325795] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.325798] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.325832] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.325836] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.325841] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.325845] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.325850] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.325880] pci 0000:00:1f.2: reg 10 io port: [0xc400-0xc407] [ 0.325885] pci 0000:00:1f.2: reg 14 io port: [0xc080-0xc083] [ 0.325888] pci 0000:00:1f.2: reg 18 io port: [0xc000-0xc007] [ 0.325892] pci 0000:00:1f.2: reg 1c io port: [0xbc00-0xbc03] [ 0.325896] pci 0000:00:1f.2: reg 20 io port: [0xb880-0xb88f] [ 0.325913] pci 0000:00:1f.2: PME# supported from D3hot [ 0.325916] pci 0000:00:1f.2: PME# disabled [ 0.325951] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.325991] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.325998] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9e0000-0xfe9effff] [ 0.326002] pci 0000:01:00.0: reg 20 io port: [0xd000-0xd0ff] [ 0.326010] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe9c0000-0xfe9dffff] [ 0.326026] pci 0000:01:00.0: supports D1 D2 [ 0.326051] pci 0000:01:00.1: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] [ 0.326077] pci 0000:01:00.1: supports D1 D2 [ 0.326112] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.326114] pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.326116] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.326187] pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.326204] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff] [ 0.326216] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdfe0000-0xfdfeffff] [ 0.326222] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfeaf0000-0xfeafffff] [ 0.326255] pci 0000:02:00.0: supports D1 D2 [ 0.326256] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.326260] pci 0000:02:00.0: PME# disabled [ 0.326305] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] [ 0.326308] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.326312] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.326340] pci 0000:04:01.0: reg 10 32bit mmio: [0xfebfe000-0xfebfffff] [ 0.326414] pci 0000:00:1e.0: transparent bridge [ 0.326417] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.326434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.326507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.326560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.326593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.332185] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.332258] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.332329] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.332399] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.332470] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.332543] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.332614] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.332687] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.332763] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.332766] vgaarb: loaded [ 0.332839] SCSI subsystem initialized [ 0.332902] libata version 3.00 loaded. [ 0.332945] usbcore: registered new interface driver usbfs [ 0.332952] usbcore: registered new interface driver hub [ 0.332971] usbcore: registered new device driver usb [ 0.333054] ACPI: WMI: Mapper loaded [ 0.333055] PCI: Using ACPI for IRQ routing [ 0.333157] NetLabel: Initializing [ 0.333158] NetLabel: domain hash size = 128 [ 0.333159] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.333169] NetLabel: unlabeled traffic allowed by default [ 0.333193] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.333196] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.340134] Switching to clocksource tsc [ 0.341247] AppArmor: AppArmor Filesystem Enabled [ 0.341263] pnp: PnP ACPI init [ 0.341277] ACPI: bus type pnp registered [ 0.343792] pnp: PnP ACPI: found 18 devices [ 0.343793] ACPI: ACPI bus type pnp unregistered [ 0.343801] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.343806] system 00:07: ioport range 0x290-0x297 has been reserved [ 0.343810] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.343812] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.343813] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.343815] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.343817] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.343821] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved [ 0.343824] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.343826] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.343830] system 00:10: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.343833] system 00:11: iomem range 0x0-0x9ffff could not be reserved [ 0.343835] system 00:11: iomem range 0xc0000-0xcffff has been reserved [ 0.343837] system 00:11: iomem range 0xe0000-0xfffff could not be reserved [ 0.343838] system 00:11: iomem range 0x100000-0xdfffffff could not be reserved [ 0.348488] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.348491] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.348493] pci 0000:00:01.0: MEM window: 0xfe900000-0xfe9fffff [ 0.348495] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.348498] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 [ 0.348500] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.348503] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf41fffff [ 0.348506] pci 0000:00:1c.0: PREFETCH window: 0x000000f4200000-0x000000f43fffff [ 0.348511] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.348513] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.348516] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff [ 0.348519] pci 0000:00:1c.1: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.348524] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.348525] pci 0000:00:1e.0: IO window: disabled [ 0.348528] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff [ 0.348531] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.348541] alloc irq_desc for 16 on node -1 [ 0.348542] alloc kstat_irqs on node -1 [ 0.348546] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348549] pci 0000:00:01.0: setting latency timer to 64 [ 0.348554] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.348557] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348559] pci 0000:00:1c.0: setting latency timer to 64 [ 0.348568] alloc irq_desc for 17 on node -1 [ 0.348569] alloc kstat_irqs on node -1 [ 0.348571] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.348574] pci 0000:00:1c.1: setting latency timer to 64 [ 0.348578] pci 0000:00:1e.0: setting latency timer to 64 [ 0.348581] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.348583] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.348584] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.348586] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff] [ 0.348587] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.348589] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff] [ 0.348590] pci_bus 0000:03: resource 1 mem: [0xf4000000-0xf41fffff] [ 0.348591] pci_bus 0000:03: resource 2 pref mem [0xf4200000-0xf43fffff] [ 0.348593] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.348594] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.348596] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.348597] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.348599] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.348600] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.348626] NET: Registered protocol family 2 [ 0.348737] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.349559] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.352694] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.353092] TCP: Hash tables configured (established 524288 bind 65536) [ 0.353094] TCP reno registered [ 0.353186] NET: Registered protocol family 1 [ 0.353275] pci 0000:01:00.0: Boot video device [ 0.353436] Scanning for low memory corruption every 60 seconds [ 0.353531] audit: initializing netlink socket (disabled) [ 0.353539] type=2000 audit(1273695465.349:1): initialized [ 0.359422] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.360308] VFS: Disk quotas dquot_6.5.2 [ 0.360340] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.360703] fuse init (API version 7.13) [ 0.360753] msgmni has been set to 7907 [ 0.360881] alg: No test for stdrng (krng) [ 0.360914] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.360917] io scheduler noop registered [ 0.360918] io scheduler anticipatory registered [ 0.360919] io scheduler deadline registered [ 0.360941] io scheduler cfq registered (default) [ 0.361026] alloc irq_desc for 24 on node -1 [ 0.361027] alloc kstat_irqs on node -1 [ 0.361033] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.361037] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.361099] alloc irq_desc for 25 on node -1 [ 0.361100] alloc kstat_irqs on node -1 [ 0.361104] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.361110] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.361190] alloc irq_desc for 26 on node -1 [ 0.361191] alloc kstat_irqs on node -1 [ 0.361195] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.361201] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.361254] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.361305] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.361375] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.361378] ACPI: Power Button [PWRB] [ 0.361405] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.361406] ACPI: Power Button [PWRF] [ 0.361788] ACPI: SSDT 00000000dffa00f0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.361959] processor LNXCPU:00: registered as cooling_device0 [ 0.362147] ACPI: SSDT 00000000dffa0310 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.362304] processor LNXCPU:01: registered as cooling_device1 [ 0.364752] Linux agpgart interface v0.103 [ 0.364773] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.364856] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.365121] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.365740] brd: module loaded [ 0.366024] loop: module loaded [ 0.366077] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.366135] ata_piix 0000:00:1f.1: version 2.13 [ 0.366143] alloc irq_desc for 18 on node -1 [ 0.366144] alloc kstat_irqs on node -1 [ 0.366149] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.366173] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.366250] scsi0 : ata_piix [ 0.366292] scsi1 : ata_piix [ 0.367196] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.367197] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.367210] alloc irq_desc for 23 on node -1 [ 0.367211] alloc kstat_irqs on node -1 [ 0.367214] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 0.367217] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.367237] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.367267] scsi2 : ata_piix [ 0.367297] scsi3 : ata_piix [ 0.368180] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 23 [ 0.368182] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 23 [ 0.368371] Fixed MDIO Bus: probed [ 0.368390] PPP generic driver version 2.4.2 [ 0.368414] tun: Universal TUN/TAP device driver, 1.6 [ 0.368415] tun: (C) 1999-2004 Max Krasnyansky [ 0.368470] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.368483] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.368498] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.368501] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.368523] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.368537] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.368544] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.372455] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.372460] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fbc00 [ 0.389719] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.389810] usb usb1: configuration #1 chosen from 1 choice [ 0.389831] hub 1-0:1.0: USB hub found [ 0.389839] hub 1-0:1.0: 8 ports detected [ 0.389888] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.389899] uhci_hcd: USB Universal Host Controller Interface driver [ 0.389929] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.389936] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.389938] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.389961] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.389983] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480 [ 0.390037] usb usb2: configuration #1 chosen from 1 choice [ 0.390052] hub 2-0:1.0: USB hub found [ 0.390056] hub 2-0:1.0: 2 ports detected [ 0.390085] alloc irq_desc for 19 on node -1 [ 0.390087] alloc kstat_irqs on node -1 [ 0.390091] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.390095] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.390097] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.390115] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.390141] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800 [ 0.390193] usb usb3: configuration #1 chosen from 1 choice [ 0.390207] hub 3-0:1.0: USB hub found [ 0.390211] hub 3-0:1.0: 2 ports detected [ 0.390241] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.390245] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.390247] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.390264] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.390287] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880 [ 0.390337] usb usb4: configuration #1 chosen from 1 choice [ 0.390353] hub 4-0:1.0: USB hub found [ 0.390357] hub 4-0:1.0: 2 ports detected [ 0.390384] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.390388] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.390390] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.390409] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.390432] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00 [ 0.390480] usb usb5: configuration #1 chosen from 1 choice [ 0.390497] hub 5-0:1.0: USB hub found [ 0.390501] hub 5-0:1.0: 2 ports detected [ 0.390561] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.393026] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.393030] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.393112] mice: PS/2 mouse device common for all mice [ 0.393181] rtc_cmos 00:03: RTC can wake from S4 [ 0.393209] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.393229] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.393308] device-mapper: uevent: version 1.0.3 [ 0.393383] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.393421] device-mapper: multipath: version 1.1.0 loaded [ 0.393425] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.393510] cpuidle: using governor ladder [ 0.393512] cpuidle: using governor menu [ 0.393717] TCP cubic registered [ 0.393790] NET: Registered protocol family 10 [ 0.394060] lo: Disabled Privacy Extensions [ 0.394224] NET: Registered protocol family 17 [ 0.394552] PM: Resume from disk failed. [ 0.394560] registered taskstats version 1 [ 0.394786] Magic number: 10:735:295 [ 0.394805] tty tty28: hash matches [ 0.394848] rtc_cmos 00:03: setting system clock to 2010-05-12 20:17:46 UTC (1273695466) [ 0.394850] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.394851] EDD information not available. [ 0.416067] Freeing initrd memory: 8139k freed [ 0.570114] ata4.01: ATA-7: FUJITSU MHV2040BH, 892C, max UDMA/100 [ 0.570116] ata4.01: 78165360 sectors, multi 16: LBA48 [ 0.570225] ata3.00: ATA-8: Hitachi HDP725032GLA360, GM3OA5CA, max UDMA/133 [ 0.570227] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.609928] ata4.01: configured for UDMA/100 [ 0.610210] ata3.00: configured for UDMA/133 [ 0.709774] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 0.711556] ata1.00: ATA-7: ST3500630A, 3.AAF, max UDMA/100 [ 0.711559] ata1.00: 976773168 sectors, multi 16: LBA48 [ 0.711580] ata1.01: ATAPI: JLMS XJ-HD166S, DS1A, max UDMA/33 [ 0.803132] ata1.00: configured for UDMA/100 [ 0.803521] ata1.01: configured for UDMA/33 [ 0.804177] scsi 0:0:0:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5 [ 0.804284] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.804308] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.804312] sd 0:0:0:0: [sda] Write Protect is off [ 0.804313] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.804328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.804571] scsi 0:0:1:0: CD-ROM JLMS XJ-HD166S DS1A PQ: 0 ANSI: 5 [ 0.804637] sda: sda1 sda2 sda3 [ 0.861888] usb 1-2: configuration #1 chosen from 1 choice [ 0.870289] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 0.870292] Uniform CD-ROM driver Revision: 3.20 [ 0.870361] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.870371] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 0.870416] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 0.870477] scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72503 GM3O PQ: 0 ANSI: 5 [ 0.870535] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.870542] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 0.870594] scsi 3:0:1:0: Direct-Access ATA FUJITSU MHV2040B 892C PQ: 0 ANSI: 5 [ 0.870656] sd 3:0:1:0: [sdc] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 0.870658] sd 3:0:1:0: Attached scsi generic sg3 type 0 [ 0.870679] sd 2:0:0:0: [sdb] Write Protect is off [ 0.870681] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.870687] sd 3:0:1:0: [sdc] Write Protect is off [ 0.870689] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 0.870698] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.870704] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.870791] sdb: [ 0.870860] sdc: sdb1 sdb2 < sdb5 sdb6 > [ 0.928639] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.227215] sdc2 < sdc5 [ 1.280013] usb 1-7: new high speed USB device using ehci_hcd and address 7 [ 1.285333] sdc6 > [ 1.285522] sd 3:0:1:0: [sdc] Attached SCSI disk [ 1.285537] Freeing unused kernel memory: 876k freed [ 1.285769] Write protecting the kernel read-only data: 7680k [ 1.294420] udev: starting version 151 [ 1.342919] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.342934] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.342970] r8169 0000:02:00.0: setting latency timer to 64 [ 1.343007] alloc irq_desc for 27 on node -1 [ 1.343008] alloc kstat_irqs on node -1 [ 1.343019] r8169 0000:02:00.0: irq 27 for MSI/MSI-X [ 1.343366] eth0: RTL8102e at 0xffffc9000066a000, 00:23:54:5d:17:0d, XID 04a00000 IRQ 27 [ 1.641551] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 11.449225] udev: starting version 151 [ 11.537607] Adding 1558296k swap on /dev/sda3. Priority:-1 extents:1 across:1558296k [ 11.580144] type=1505 audit(1273688277.676:2): operation="profile_load" pid=648 name="/sbin/dhclient3" [ 11.580542] type=1505 audit(1273688277.676:3): operation="profile_load" pid=648 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.580756] type=1505 audit(1273688277.676:4): operation="profile_load" pid=648 name="/usr/lib/connman/scripts/dhclient-script" [ 11.597407] [drm] Initialized drm 1.1.0 20060810 [ 11.601660] parport_pc 00:06: reported by Plug and Play ACPI [ 11.601765] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 11.607499] cfg80211: Calling CRDA to update world regulatory domain [ 11.613711] intel_rng: FWH not detected [ 11.614346] lp: driver loaded but no devices found [ 11.653761] cfg80211: World regulatory domain updated: [ 11.653763] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.653765] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.653766] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.653768] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.653769] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.653771] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.654723] rt2500pci 0000:04:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.658515] [drm] radeon defaulting to kernel modesetting. [ 11.658516] [drm] radeon kernel modesetting enabled. [ 11.658542] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.658545] radeon 0000:01:00.0: setting latency timer to 64 [ 11.660047] [drm] radeon: Initializing kernel modesetting. [ 11.661454] [drm] register mmio base: 0xFE9E0000 [ 11.661455] [drm] register mmio size: 65536 [ 11.661496] ATOM BIOS: Wekiva [ 11.661507] [drm] Clocks initialized ! [ 11.661524] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 11.661526] [drm] Detected VRAM RAM=256M, BAR=256M [ 11.661527] [drm] RAM width 256bits DDR [ 11.661945] [TTM] Zone kernel: Available graphics memory: 2028902 kiB. [ 11.661955] [drm] radeon: 256M of VRAM memory ready [ 11.661957] [drm] radeon: 512M of GTT memory ready. [ 11.661987] alloc irq_desc for 28 on node -1 [ 11.661989] alloc kstat_irqs on node -1 [ 11.661998] radeon 0000:01:00.0: irq 28 for MSI/MSI-X [ 11.662003] [drm] radeon: using MSI. [ 11.662028] [drm] radeon: irq initialized. [ 11.662030] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 11.662394] [drm] Loading RV770 Microcode [ 11.662397] platform radeon_cp.0: firmware: requesting radeon/RV770_pfp.bin [ 11.665156] platform radeon_cp.0: firmware: requesting radeon/RV770_me.bin [ 11.667371] platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin [ 11.671664] ppdev: user-space parallel port driver [ 11.687165] lp0: using parport0 (interrupt-driven). [ 11.696747] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1714 [ 11.696760] usbcore: registered new interface driver usblp [ 11.704719] phy0: Selected rate control algorithm 'minstrel' [ 11.705121] Registered led device: rt2500pci-phy0::radio [ 11.705132] Registered led device: rt2500pci-phy0::quality [ 11.725998] [drm] ring test succeeded in 1 usecs [ 11.726076] [drm] radeon: ib pool ready. [ 11.726130] [drm] ib test succeeded in 0 usecs [ 11.726391] [drm] Default TV standard: PAL [ 11.726636] [drm] Radeon Display Connectors [ 11.726638] [drm] Connector 0: [ 11.726639] [drm] DVI-I [ 11.726640] [drm] HPD1 [ 11.726641] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 11.726642] [drm] Encoders: [ 11.726643] [drm] DFP1: INTERNAL_UNIPHY [ 11.726644] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 11.726645] [drm] Connector 1: [ 11.726646] [drm] DIN [ 11.726647] [drm] Encoders: [ 11.726647] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 11.726648] [drm] Connector 2: [ 11.726649] [drm] DVI-I [ 11.726650] [drm] HPD2 [ 11.726651] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [ 11.726652] [drm] Encoders: [ 11.726653] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 11.726654] [drm] DFP2: INTERNAL_KLDSCP_LVTMA [ 11.741103] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.741140] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.910706] composite sync not supported [ 11.968778] [drm] fb mappable at 0xE0141000 [ 11.968780] [drm] vram apper at 0xE0000000 [ 11.968781] [drm] size 6553600 [ 11.968782] [drm] fb depth is 24 [ 11.968783] [drm] pitch is 6400 [ 11.968850] fb0: radeondrmfb frame buffer device [ 11.968850] registered panic notifier [ 11.968850] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 11.968893] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.968894] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 11.969965] vga16fb: initializing [ 11.969965] vga16fb: mapped to 0xffff8800000a0000 [ 11.969965] vga16fb: not registering due to another framebuffer present [ 12.013369] Console: switching to colour frame buffer device 160x56 [ 12.071159] composite sync not supported [ 16.400019] usb 1-7: device descriptor read/64, error -110 [ 18.585057] EXT4-fs (sdc6): mounted filesystem with ordered data mode [ 19.662616] type=1505 audit(1273688285.765:5): operation="profile_load" pid=1015 name="/usr/share/gdm/guest-session/Xsession" [ 19.663538] type=1505 audit(1273688285.765:6): operation="profile_replace" pid=1016 name="/sbin/dhclient3" [ 19.663938] type=1505 audit(1273688285.765:7): operation="profile_replace" pid=1016 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 19.664154] type=1505 audit(1273688285.765:8): operation="profile_replace" pid=1016 name="/usr/lib/connman/scripts/dhclient-script" [ 19.665869] type=1505 audit(1273688285.765:9): operation="profile_load" pid=1017 name="/usr/bin/evince" [ 19.667861] r8169: eth0: link down [ 19.668152] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.671042] type=1505 audit(1273688285.775:10): operation="profile_load" pid=1017 name="/usr/bin/evince-previewer" [ 19.674147] type=1505 audit(1273688285.775:11): operation="profile_load" pid=1017 name="/usr/bin/evince-thumbnailer" [ 19.679031] type=1505 audit(1273688285.775:12): operation="profile_load" pid=1019 name="/usr/lib/cups/backend/cups-pdf" [ 19.679518] type=1505 audit(1273688285.775:13): operation="profile_load" pid=1019 name="/usr/sbin/cupsd" [ 19.681044] type=1505 audit(1273688285.785:14): operation="profile_load" pid=1022 name="/usr/sbin/tcpdump" [ 19.732279] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.856448] composite sync not supported [ 19.974816] composite sync not supported [ 21.470647] composite sync not supported [ 21.595406] composite sync not supported [ 21.716011] composite sync not supported [ 22.882880] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 27.661482] wlan0: deauthenticating from a2:ea:65:61:30:98 by local choice (reason=3) [ 27.661517] wlan0: direct probe to AP a2:ea:65:61:30:98 (try 1) [ 27.665392] wlan0: direct probe responded [ 27.665395] wlan0: authenticate with AP a2:ea:65:61:30:98 (try 1) [ 27.667191] wlan0: authenticated [ 27.667204] wlan0: associate with AP a2:ea:65:61:30:98 (try 1) [ 27.669539] wlan0: RX AssocResp from a2:ea:65:61:30:98 (capab=0x411 status=0 aid=1) [ 27.669541] wlan0: associated [ 27.670071] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 27.880013] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 27.990012] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 28.275329] Intel AES-NI instructions are not detected. [ 28.300631] padlock: VIA PadLock not detected. [ 28.480009] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 28.990013] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 30.940121] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 31.540025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 31.637538] usb 1-7: device descriptor read/64, error -110 [ 31.860012] usb 1-7: new high speed USB device using ehci_hcd and address 8 [ 32.140010] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 32.350009] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 32.570008] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 32.814652] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 33.020010] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 33.360012] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 33.460009] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 33.670010] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 33.890011] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 34.200011] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 35.640023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 36.310021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 36.990016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 37.790030] wlan0: no IPv6 routers present [ 38.300015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 41.480022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 42.400020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 43.320021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 44.240020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 46.380021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 46.980018] usb 1-7: device descriptor read/64, error -110 [ 62.210031] usb 1-7: device descriptor read/64, error -110 [ 62.440046] usb 1-7: new high speed USB device using ehci_hcd and address 9 [ 72.860023] usb 1-7: device not accepting address 9, error -110 [ 72.980017] usb 1-7: new high speed USB device using ehci_hcd and address 10 [ 77.240022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 83.400024] usb 1-7: device not accepting address 10, error -110 [ 83.400037] hub 1-0:1.0: unable to enumerate USB device on port 7 [ 83.720025] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 83.881439] usb 3-1: configuration #1 chosen from 1 choice [ 83.952761] usbcore: registered new interface driver hiddev [ 83.965701] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3 [ 83.965790] generic-usb 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.1-1/input0 [ 83.988513] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input4 [ 83.988584] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.1-1/input1 [ 83.988610] usbcore: registered new interface driver usbhid [ 83.988613] usbhid: v2.6:USB HID core driver [ 84.000047] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 84.160041] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 84.341752] usb 3-2: configuration #1 chosen from 1 choice [ 84.358954] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5 [ 84.359061] generic-usb 0003:046D:C050.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0 [ 84.630023] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 84.788215] usb 4-1: configuration #1 chosen from 1 choice [ 84.886784] Bluetooth: Core ver 2.15 [ 84.886844] NET: Registered protocol family 31 [ 84.886844] Bluetooth: HCI device and connection manager initialized [ 84.886844] Bluetooth: HCI socket layer initialized [ 84.914165] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 84.916627] usbcore: registered new interface driver btusb [ 85.070018] usb 4-2: new low speed USB device using uhci_hcd and address 3 [ 85.242514] usb 4-2: configuration #1 chosen from 1 choice [ 85.247669] usb 1-2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 85.302009] Bluetooth: L2CAP ver 2.14 [ 85.302011] Bluetooth: L2CAP socket layer initialized [ 85.356957] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 85.356961] Bluetooth: BNEP filters: protocol multicast [ 85.400476] Bridge firewalling registered [ 85.449631] input: Twin USB Joystick as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input6 [ 85.449801] input: Twin USB Joystick as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input7 [ 85.449977] pantherlord 0003:0810:0001.0004: input,hidraw3: USB HID v1.10 Joystick [Twin USB Joystick] on usb-0000:00:1d.2-2/input0 [ 85.449990] pantherlord 0003:0810:0001.0004: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula [ 85.504349] Bluetooth: SCO (Voice Link) ver 0.6 [ 85.504352] Bluetooth: SCO socket layer initialized [ 85.520038] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 85.746056] Bluetooth: RFCOMM TTY layer initialized [ 85.746060] Bluetooth: RFCOMM socket layer initialized [ 85.746062] Bluetooth: RFCOMM ver 1.11 [ 86.140012] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 98.602199] composite sync not supported [ 100.640023] usb 5-1: device descriptor read/64, error -110 [ 108.750018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 109.000016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 109.310018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 109.870023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 110.130017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 110.430018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 111.170018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 111.910012] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 112.690015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 115.130016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 115.350019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 115.870014] usb 5-1: device descriptor read/64, error -110 [ 116.110022] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 118.150019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 119.040033] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 119.250016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 120.200017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 120.300018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 120.930016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 121.560025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 124.780026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 126.150020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 126.420015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 126.730017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 127.030015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 127.340017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 127.560025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 127.860016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 127.960017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 128.520017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 130.150016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 130.850024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 131.230021] usb 5-1: device descriptor read/64, error -110 [ 131.320023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 131.590015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 131.910018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 132.250019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 132.470022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 132.770015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 133.240027] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 133.490024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 133.840016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 134.010017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 134.310066] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 134.581265] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 134.830017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 135.170015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 135.480018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 135.990018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 136.260017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 136.560022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 136.940019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 137.180015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 137.510018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 137.790033] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 138.040036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 138.310016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 138.620018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 139.200017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 139.430016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 139.740064] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 140.330026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 146.070018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 146.460022] usb 5-1: device descriptor read/64, error -110 [ 146.690021] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 146.950019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 147.480026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 149.270021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 154.870016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 155.070019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 155.320021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 155.680016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 155.930022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 156.240017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 156.630452] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 156.850020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 157.110021] usb 5-1: device not accepting address 4, error -110 [ 157.230023] usb 5-1: new full speed USB device using uhci_hcd and address 5 [ 157.290032] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 157.570019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 157.880030] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 159.450025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 160.680017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 160.950020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 161.160021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 161.470017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 162.040045] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 162.300022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 164.381275] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 164.641272] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 164.991271] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 165.561272] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 165.771270] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 166.430024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 166.730023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 166.980020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 167.200013] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 167.510024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 167.650020] usb 5-1: device not accepting address 5, error -110 [ 167.650035] hub 5-0:1.0: unable to enumerate USB device on port 1 [ 167.820027] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 168.610026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 168.900015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 169.150017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 169.460018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 169.760015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 170.080018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 170.330019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 170.580024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 170.890018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 171.280017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 171.580017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 171.810018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 172.120020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 172.510017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 172.730018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 173.040036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 173.350017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 173.660017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 174.030017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 174.270018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 174.480018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 174.780019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 175.160017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 175.710019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 176.080024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 176.320015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 176.630075] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 176.970016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 177.240088] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 177.640018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 177.860019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 178.520017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 178.780017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 178.990015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 179.860018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 179.960018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 180.270020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 180.520018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 180.870018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 181.590017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 182.780024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 186.850015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 187.080015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 187.290029] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 189.550063] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 190.270017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 191.960031] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 194.121267] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 194.813026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 195.730017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 196.000020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 196.300016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 197.110017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 197.330017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 199.640018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 199.740018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 199.950020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 200.200012] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 200.650017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 202.640019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 202.860015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 203.070011] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 203.410025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 205.290054] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 206.870020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 207.160023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 214.890022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 215.400022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 216.020019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 218.350019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 219.590013] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 219.870017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 222.330019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 222.840017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 223.770019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 224.690017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 226.410016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 231.581272] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 231.860014] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 231.980016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 232.430025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 232.720016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 232.990017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 233.300012] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 233.600018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 234.420016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 235.270017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 235.550017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 236.060016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 236.370018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 236.670015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 237.000017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 237.330026] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 237.600020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 239.560017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 239.850017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 241.150018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 241.430019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 241.740019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 242.040036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 242.320023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 242.700023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 242.970011] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 243.230017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 243.780015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 244.060016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 244.530018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 244.770021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 245.790035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 246.610017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 247.470019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 247.990023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 248.320018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 248.930018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 249.220017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 249.500014] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 249.840016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 250.120015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 250.920020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 251.230014] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 252.320020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 253.580017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 254.280023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 266.910019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 267.210021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 269.910023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 271.780025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 275.880018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 276.120018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 276.330017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 276.640016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 276.940014] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 278.000023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 278.630019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 278.890025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 279.110012] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 279.420018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 279.750025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 280.610017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 280.840017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 281.360019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 281.660014] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 281.990018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 282.270016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 282.480021] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 283.940017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 287.100014] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 287.781264] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 288.061265] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 288.320019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 288.780020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 290.410018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 290.680020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 290.980043] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 291.290038] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 291.510016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 291.800017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 292.670018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 292.940017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 293.790036] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 294.100028] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 297.270020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 303.430014] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 305.470018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 306.290035] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 308.140024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 312.060015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 322.340024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 323.260023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 324.180023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 326.320015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 326.940017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 330.030025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 330.330023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 331.272815] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 331.370022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 331.770024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 332.080018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 335.250024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 342.180019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 342.420018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 346.660025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 346.970011] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 348.810025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 349.390016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 349.540023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 349.830020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 350.400018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 350.820027] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 356.160018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 359.240017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 359.530016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 359.740015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 360.570024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 363.910025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 364.140017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 364.350020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 364.700024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 365.590018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 372.390017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 375.460019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 379.560024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 387.180023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 387.410016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 397.860024] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 402.880018] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 410.500020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 417.230025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 442.330023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 442.840013] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 443.760023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 446.120030] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 446.330023] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 456.430025] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 456.670020] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 456.880016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 457.190017] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 457.490015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 457.750016] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 461.390015] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 472.800019] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 477.180013] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16). [ 477.470022] phy0 -> rt2500pci_set_device_state: Error - Device failed to enter state 1 (-16).