[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-26-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #48-Ubuntu SMP Wed Nov 24 09:00:03 UTC 2010 (Ubuntu 2.6.32-26.48-generic 2.6.32.24+drm33.11) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) [ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data) [ 0.000000] BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000000fff0000 (usable) [ 0.000000] modified: 000000000fff0000 - 000000000fffec00 (ACPI data) [ 0.000000] modified: 000000000fffec00 - 0000000010000000 (ACPI NVS) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000fc00000 page 2M [ 0.000000] 000fc00000 - 000fff0000 page 4k [ 0.000000] kernel direct mapping tables up to fff0000 @ 7000-c000 [ 0.000000] RAMDISK: 0b318000 - 0c03378d [ 0.000000] ACPI: RSDP 000f7120 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 0fff57b2 0002C (v01 PTLTD RSDT 06041090 LTP 00000000) [ 0.000000] ACPI: FACP 0fffeb65 00074 (v01 IBM TP-A21m 06041090 00000000) [ 0.000000] ACPI: DSDT 0fff57de 09387 (v01 IBM TP-A21m 06041090 MSFT 0100000C) [ 0.000000] ACPI: FACS 0ffff000 00040 [ 0.000000] ACPI: BOOT 0fffebd9 00027 (v01 PTLTD $SBFTBL$ 06041090 LTP 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fff0000 [ 0.000000] low ram: 0 - 0fff0000 [ 0.000000] node 0 low ram: 00000000 - 0fff0000 [ 0.000000] node 0 bootmap 00008000 - 0000a000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8] [ 0.000000] #4 [000b318000 - 000c03378d] RAMDISK ==> [000b318000 - 000c03378d] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008dd000 - 00008e00f5] BRK ==> [00008dd000 - 00008e00f5] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000a000] BOOTMAP ==> [0000008000 - 000000a000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000fff0 [ 0.000000] HighMem 0x0000fff0 -> 0x0000fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0000fff0 [ 0.000000] On node 0 totalpages: 65419 [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 60944 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64907 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=6274a446-aecf-4d4d-bc34-3f006f6745b0 ro quiet splash [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1310400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 236232k/262080k available (4682k kernel code, 25124k reserved, 2121k data, 656k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB) [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB) [ 0.000000] .data : 0xc0592847 - 0xc07a4e68 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0592847 (4682 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 548.035 MHz processor. [ 0.008013] Calibrating delay loop (skipped), value calculated using timer frequency.. 1096.07 BogoMIPS (lpj=2192140) [ 0.008083] Security Framework initialized [ 0.008181] AppArmor: AppArmor initialized [ 0.008213] Mount-cache hash table entries: 512 [ 0.008679] Initializing cgroup subsys ns [ 0.008695] Initializing cgroup subsys cpuacct [ 0.008714] Initializing cgroup subsys memory [ 0.008751] Initializing cgroup subsys devices [ 0.008765] Initializing cgroup subsys freezer [ 0.008777] Initializing cgroup subsys net_cls [ 0.008857] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.008872] CPU: L2 cache: 256K [ 0.008890] mce: CPU supports 5 MCE banks [ 0.008938] Performance Events: [ 0.008949] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.008960] no hardware sampling interrupt available. [ 0.008970] p6 PMU driver. [ 0.009049] ... version: 0 [ 0.009059] ... bit width: 32 [ 0.009068] ... generic registers: 2 [ 0.009078] ... value mask: 00000000ffffffff [ 0.009088] ... max period: 000000007fffffff [ 0.009098] ... fixed-purpose events: 0 [ 0.009108] ... event mask: 0000000000000003 [ 0.009125] Checking 'hlt' instruction... OK. [ 0.026014] SMP alternatives: switching to UP code [ 0.047536] Freeing SMP alternatives: 19k freed [ 0.047612] ACPI: Core revision 20090903 [ 0.077948] ACPI: setting ELCR to 0200 (from 0800) [ 0.080034] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.080054] ftrace: allocating 21794 entries in 43 pages [ 0.088360] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.088381] weird, boot CPU (#0) not listed by the BIOS. [ 0.088391] SMP motherboard not detected. [ 0.088402] Local APIC not detected. Using dummy APIC emulation. [ 0.088412] SMP disabled [ 0.089277] Brought up 1 CPUs [ 0.089296] Total of 1 processors activated (1096.07 BogoMIPS). [ 0.092125] CPU0 attaching NULL sched-domain. [ 0.092635] devtmpfs: initialized [ 0.094330] regulator: core version 0.5 [ 0.094378] Time: 4:07:17 Date: 12/05/10 [ 0.094594] NET: Registered protocol family 16 [ 0.095109] EISA bus registered [ 0.095156] ACPI: bus type pci registered [ 0.096242] PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 [ 0.096253] PCI: Using configuration type 1 for base access [ 0.100852] bio: create slab at 0 [ 0.104457] ACPI: EC: Look up EC in DSDT [ 0.512983] ACPI: Interpreter enabled [ 0.513000] ACPI: (supports S0 S1 S3 S4 S5) [ 0.513114] ACPI: Using PIC for interrupt routing [ 0.738886] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 [ 0.740280] ACPI: Power Resource [PSER] (on) [ 0.740441] ACPI: Power Resource [PSIO] (on) [ 0.743353] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.743466] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.743630] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff] [ 0.743798] pci 0000:00:02.0: reg 10 32bit mmio: [0x50000000-0x50000fff] [ 0.743837] pci 0000:00:02.0: supports D1 D2 [ 0.743850] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.743865] pci 0000:00:02.0: PME# disabled [ 0.743933] pci 0000:00:02.1: reg 10 32bit mmio: [0x50100000-0x50100fff] [ 0.743971] pci 0000:00:02.1: supports D1 D2 [ 0.743982] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.744024] pci 0000:00:02.1: PME# disabled [ 0.744103] pci 0000:00:03.0: reg 10 32bit mmio: [0xf4120000-0xf4120fff] [ 0.744123] pci 0000:00:03.0: reg 14 io port: [0x1800-0x183f] [ 0.744143] pci 0000:00:03.0: reg 18 32bit mmio: [0xf4100000-0xf411ffff] [ 0.744180] pci 0000:00:03.0: reg 30 32bit mmio pref: [0x000000-0x0fffff] [ 0.744218] pci 0000:00:03.0: supports D1 D2 [ 0.744230] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.744244] pci 0000:00:03.0: PME# disabled [ 0.744308] pci 0000:00:03.1: reg 10 io port: [0x1840-0x1847] [ 0.744328] pci 0000:00:03.1: reg 14 32bit mmio: [0xf4121000-0xf4121fff] [ 0.744394] pci 0000:00:03.1: supports D1 D2 [ 0.744406] pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.744420] pci 0000:00:03.1: PME# disabled [ 0.744506] pci 0000:00:05.0: reg 10 32bit mmio: [0xf4122000-0xf4122fff] [ 0.744527] pci 0000:00:05.0: reg 14 32bit mmio: [0xf4000000-0xf40fffff] [ 0.744595] pci 0000:00:05.0: supports D1 D2 [ 0.744761] pci 0000:00:07.1: reg 20 io port: [0x1850-0x185f] [ 0.744865] pci 0000:00:07.2: reg 20 io port: [0x1860-0x187f] [ 0.744992] pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI [ 0.745008] pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB [ 0.745027] pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef [ 0.745041] pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7 [ 0.745055] pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f [ 0.745195] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff] [ 0.745215] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] [ 0.745233] pci 0000:01:00.0: reg 18 32bit mmio: [0xf4200000-0xf4200fff] [ 0.745268] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.745309] pci 0000:01:00.0: supports D1 D2 [ 0.745380] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.745394] pci 0000:00:01.0: bridge 32bit mmio: [0xf4200000-0xf5ffffff] [ 0.745471] pci_bus 0000:00: on NUMA node 0 [ 0.745492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.745736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.762091] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.762781] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.763466] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.764182] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.764707] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.764721] vgaarb: loaded [ 0.765266] SCSI subsystem initialized [ 0.765545] libata version 3.00 loaded. [ 0.765883] usbcore: registered new interface driver usbfs [ 0.765945] usbcore: registered new interface driver hub [ 0.766086] usbcore: registered new device driver usb [ 0.766703] ACPI: WMI: Mapper loaded [ 0.766713] PCI: Using ACPI for IRQ routing [ 0.767364] NetLabel: Initializing [ 0.767374] NetLabel: domain hash size = 128 [ 0.767383] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.767437] NetLabel: unlabeled traffic allowed by default [ 0.767624] Switching to clocksource tsc [ 0.772175] AppArmor: AppArmor Filesystem Enabled [ 0.772327] pnp: PnP ACPI init [ 0.772399] ACPI: bus type pnp registered [ 0.775117] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775138] pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775155] pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775173] pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775190] pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775208] pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775225] pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775242] pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775259] pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775277] pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775294] pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775311] pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775328] pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.775346] pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.888005] pnp: PnP ACPI: found 15 devices [ 0.888018] ACPI: ACPI bus type pnp unregistered [ 0.888032] PnPBIOS: Disabled by ACPI PNP [ 0.888088] system 00:00: iomem range 0x100000-0xfffffff could not be reserved [ 0.888106] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved [ 0.888140] system 00:02: ioport range 0x1000-0x103f has been reserved [ 0.888155] system 00:02: ioport range 0x1040-0x104f has been reserved [ 0.888205] system 00:02: ioport range 0xfe00-0xfe0f has been reserved [ 0.888244] system 00:09: ioport range 0x15e0-0x15ef has been reserved [ 0.923690] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.923705] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.923722] pci 0000:00:01.0: MEM window: 0xf4200000-0xf5ffffff [ 0.923738] pci 0000:00:01.0: PREFETCH window: 0x20000000-0x200fffff [ 0.923756] pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02 [ 0.923768] pci 0000:00:02.0: IO window: 0x001400-0x0014ff [ 0.923783] pci 0000:00:02.0: IO window: 0x001c00-0x001cff [ 0.923797] pci 0000:00:02.0: PREFETCH window: 0x10000000-0x13ffffff [ 0.923813] pci 0000:00:02.0: MEM window: 0x14000000-0x17ffffff [ 0.923828] pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06 [ 0.923839] pci 0000:00:02.1: IO window: 0x003000-0x0030ff [ 0.923854] pci 0000:00:02.1: IO window: 0x003400-0x0034ff [ 0.923868] pci 0000:00:02.1: PREFETCH window: 0x18000000-0x1bffffff [ 0.923883] pci 0000:00:02.1: MEM window: 0x1c000000-0x1fffffff [ 0.924096] pci 0000:00:02.0: power state changed by ACPI to D0 [ 0.924254] pci 0000:00:02.0: power state changed by ACPI to D0 [ 0.925399] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.925413] PCI: setting IRQ 11 as level-triggered [ 0.925430] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.925569] pci 0000:00:02.1: power state changed by ACPI to D0 [ 0.925704] pci 0000:00:02.1: power state changed by ACPI to D0 [ 0.926802] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.926818] pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.926842] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.926856] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.926869] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.926883] pci_bus 0000:01: resource 1 mem: [0xf4200000-0xf5ffffff] [ 0.926896] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x200fffff] [ 0.926910] pci_bus 0000:02: resource 0 io: [0x1400-0x14ff] [ 0.926923] pci_bus 0000:02: resource 1 io: [0x1c00-0x1cff] [ 0.926936] pci_bus 0000:02: resource 2 pref mem [0x10000000-0x13ffffff] [ 0.926949] pci_bus 0000:02: resource 3 mem: [0x14000000-0x17ffffff] [ 0.926963] pci_bus 0000:06: resource 0 io: [0x3000-0x30ff] [ 0.926976] pci_bus 0000:06: resource 1 io: [0x3400-0x34ff] [ 0.926989] pci_bus 0000:06: resource 2 pref mem [0x18000000-0x1bffffff] [ 0.927002] pci_bus 0000:06: resource 3 mem: [0x1c000000-0x1fffffff] [ 0.927159] NET: Registered protocol family 2 [ 0.927601] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.929030] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.929232] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.929423] TCP: Hash tables configured (established 8192 bind 8192) [ 0.929434] TCP reno registered [ 0.929770] NET: Registered protocol family 1 [ 0.929843] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.929976] pci 0000:01:00.0: Boot video device [ 0.930271] Simple Boot Flag at 0x35 set to 0x1 [ 0.930592] cpufreq-nforce2: No nForce2 chipset. [ 0.930691] Scanning for low memory corruption every 60 seconds [ 0.931269] audit: initializing netlink socket (disabled) [ 0.931311] type=2000 audit(1291522036.928:1): initialized [ 0.971138] Trying to unpack rootfs image as initramfs... [ 1.013781] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.028303] VFS: Disk quotas dquot_6.5.2 [ 1.028682] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.037274] fuse init (API version 7.13) [ 1.037845] msgmni has been set to 462 [ 1.044870] alg: No test for stdrng (krng) [ 1.045143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.045158] io scheduler noop registered [ 1.045168] io scheduler anticipatory registered [ 1.045177] io scheduler deadline registered [ 1.045438] io scheduler cfq registered (default) [ 1.045883] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.045993] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.046733] ACPI: AC Adapter [AC] (off-line) [ 1.047077] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.047427] ACPI: Lid Switch [LID] [ 1.047634] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.047653] ACPI: Sleep Button [SLPB] [ 1.047905] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.047919] ACPI: Power Button [PWRF] [ 1.048561] Marking TSC unstable due to TSC halts in idle [ 1.048859] processor LNXCPU:00: registered as cooling_device0 [ 1.056970] Switching to clocksource acpi_pm [ 1.189493] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.189541] ACPI: Thermal Zone [THM0] (44 C) [ 1.196768] isapnp: Scanning for PnP cards... [ 1.206881] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.207094] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.207268] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250 [ 1.258299] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.264815] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 1.264839] serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.277139] ACPI: Battery Slot [BAT0] (battery present) [ 1.279933] brd: module loaded [ 1.290220] loop: module loaded [ 1.290680] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.291154] ata_piix 0000:00:07.1: version 2.13 [ 1.296338] scsi0 : ata_piix [ 1.296908] scsi1 : ata_piix [ 1.546071] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14 [ 1.546089] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15 [ 1.552849] Fixed MDIO Bus: probed [ 1.553035] PPP generic driver version 2.4.2 [ 1.553328] tun: Universal TUN/TAP device driver, 1.6 [ 1.553340] tun: (C) 1999-2004 Max Krasnyansky [ 1.553760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.553857] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.553921] uhci_hcd: USB Universal Host Controller Interface driver [ 1.555459] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.555480] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.555512] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 1.555713] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 1.555781] uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860 [ 1.556583] usb usb1: configuration #1 chosen from 1 choice [ 1.556717] hub 1-0:1.0: USB hub found [ 1.556758] hub 1-0:1.0: 2 ports detected [ 1.557193] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.582412] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.582465] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.589468] mice: PS/2 mouse device common for all mice [ 1.590094] rtc_cmos 00:06: RTC can wake from S4 [ 1.590319] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.590371] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 1.590938] device-mapper: uevent: version 1.0.3 [ 1.591536] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.591836] device-mapper: multipath: version 1.1.0 loaded [ 1.591849] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.592580] EISA: Probing bus 0 at eisa.0 [ 1.592601] Cannot allocate resource for EISA slot 1 [ 1.592613] Cannot allocate resource for EISA slot 2 [ 1.592624] Cannot allocate resource for EISA slot 3 [ 1.592659] EISA: Detected 0 cards. [ 1.596620] cpuidle: using governor ladder [ 1.596889] cpuidle: using governor menu [ 1.599252] TCP cubic registered [ 1.600196] NET: Registered protocol family 10 [ 1.601252] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.606622] lo: Disabled Privacy Extensions [ 1.608357] NET: Registered protocol family 17 [ 1.613214] Using IPI No-Shortcut mode [ 1.613661] PM: Resume from disk failed. [ 1.613710] registered taskstats version 1 [ 1.614268] Magic number: 6:896:109 [ 1.614473] rtc_cmos 00:06: setting system clock to 2010-12-05 04:07:18 UTC (1291522038) [ 1.614488] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.614497] EDD information not available. [ 1.709908] ata1.00: ATA-5: HITACHI_DK23DA-20, 00J2A0G0, max UDMA/100 [ 1.709926] ata1.00: 39070080 sectors, multi 16: LBA [ 1.756700] ata2.01: NODEV after polling detection [ 1.765739] ata1.00: configured for UDMA/33 [ 1.772760] ata2.00: ATAPI: HITACHI DVD-ROM GD-S200, 0034, max UDMA/33 [ 1.788786] ata2.00: configured for UDMA/33 [ 1.932660] isapnp: No Plug & Play device found [ 1.933236] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23DA-2 00J2 PQ: 0 ANSI: 5 [ 1.933903] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.934515] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB) [ 1.934755] sd 0:0:0:0: [sda] Write Protect is off [ 1.934770] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.934894] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.935550] sda: [ 1.951470] scsi 1:0:0:0: CD-ROM HITACHI DVD-ROM GD-S200 0034 PQ: 0 ANSI: 5 [ 1.952502] sda1 sda2 [ 1.977863] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.987732] Freeing initrd memory: 13421k freed [ 3.063512] Freeing unused kernel memory: 656k freed [ 3.067388] Write protecting the kernel text: 4684k [ 3.067545] Write protecting the kernel read-only data: 1840k [ 3.160413] udev: starting version 151 [ 3.952792] Floppy drive(s): fd0 is 1.44M [ 3.971467] FDC 0 is a National Semiconductor PC87306 [ 4.082238] Linux agpgart interface v0.103 [ 4.124487] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/LNXVIDEO:00/input/input5 [ 4.125041] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 4.140488] agpgart-intel 0000:00:00.0: Intel 440BX Chipset [ 4.166200] vga16fb: initializing [ 4.166223] vga16fb: mapped to 0xc00a0000 [ 4.166757] fb0: VGA16 VGA frame buffer device [ 4.167990] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 4.188883] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 4.188898] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.189028] e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 4.277057] e100 0000:00:03.0: PME# disabled [ 4.451184] e100: eth0: e100_probe: addr 0xf4120000, irq 11, MAC addr 00:10:a4:8e:fb:85 [ 4.457099] Console: switching to colour frame buffer device 80x30 [ 5.300911] xor: automatically using best checksumming function: pIII_sse [ 5.320037] pIII_sse : 1110.000 MB/sec [ 5.320049] xor: using function: pIII_sse (1110.000 MB/sec) [ 5.377471] device-mapper: dm-raid45: initialized v0.2594b [ 5.674336] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 17.248265] Adding 730916k swap on /dev/sda5. Priority:-1 extents:1 across:730916k [ 19.543682] udev: starting version 151 [ 21.685052] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.754281] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module! [ 21.754632] piix4_smbus: probe of 0000:00:07.3 failed with error -1 [ 21.799585] Non-volatile memory driver v1.3 [ 21.941241] parport_pc 00:0d: reported by Plug and Play ACPI [ 21.941310] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 21.989637] yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:0130] [ 21.989676] yenta_cardbus 0000:00:02.0: Using INTVAL to route CSC interrupts to PCI [ 21.989689] yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI [ 21.989705] yenta_cardbus 0000:00:02.0: TI: mfunc 0x00001000, devctl 0x66 [ 22.042633] lp0: using parport0 (interrupt-driven). [ 22.220593] yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0430, PCI irq 11 [ 22.220610] yenta_cardbus 0000:00:02.0: Socket status: 30000006 [ 22.232467] yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:0130] [ 22.232506] yenta_cardbus 0000:00:02.1: Using INTVAL to route CSC interrupts to PCI [ 22.232519] yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI [ 22.232535] yenta_cardbus 0000:00:02.1: TI: mfunc 0x00001000, devctl 0x66 [ 22.405629] type=1505 audit(1291522059.289:2): operation="profile_load" pid=585 name="/sbin/dhclient3" [ 22.407603] type=1505 audit(1291522059.289:3): operation="profile_load" pid=585 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.465690] type=1505 audit(1291522059.349:4): operation="profile_load" pid=585 name="/usr/lib/connman/scripts/dhclient-script" [ 22.472595] yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0430, PCI irq 11 [ 22.472611] yenta_cardbus 0000:00:02.1: Socket status: 30000020 [ 22.706623] irda_init() [ 22.706683] NET: Registered protocol family 23 [ 22.890268] ppdev: user-space parallel port driver [ 23.112135] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1 [ 23.112232] pci 0000:06:00.0: reg 10 32bit mmio: [0x000000-0x00ffff] [ 23.230280] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 23.230518] nsc-ircc, chip->init [ 23.230530] nsc-ircc, Found chip at base=0x02e [ 23.230567] nsc-ircc, driver loaded (Dag Brattli) [ 23.234051] nsc_ircc_open(), can't get iobase of 0x2f8 [ 23.234092] nsc-ircc, Found chip at base=0x02e [ 23.234129] nsc-ircc, driver loaded (Dag Brattli) [ 23.234144] nsc_ircc_open(), can't get iobase of 0x2f8 [ 23.245343] nsc-ircc 00:0e: disabled [ 23.247399] psmouse serio1: ID: 10 00 64 [ 23.633687] e100 0000:00:03.0: firmware: requesting e100/d101s_ucode.bin [ 23.664392] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.697056] Disabling lock debugging due to kernel taint [ 23.809367] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 23.810341] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 23.810853] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 23.811306] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 23.814176] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 23.863154] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 23.896799] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6 [ 23.989989] ndiswrapper version 1.55 loaded (smp=yes, preempt=no) [ 24.006766] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 24.007737] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 24.068625] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 24.069078] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 24.070027] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 24.466218] type=1505 audit(1291522061.349:5): operation="profile_load" pid=752 name="/usr/share/gdm/guest-session/Xsession" [ 24.500125] type=1505 audit(1291522061.381:6): operation="profile_replace" pid=758 name="/sbin/dhclient3" [ 24.520780] type=1505 audit(1291522061.405:7): operation="profile_replace" pid=758 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 24.521905] type=1505 audit(1291522061.405:8): operation="profile_replace" pid=758 name="/usr/lib/connman/scripts/dhclient-script" [ 24.644362] type=1505 audit(1291522061.529:9): operation="profile_load" pid=765 name="/usr/bin/evince" [ 24.768899] type=1505 audit(1291522061.653:10): operation="profile_load" pid=765 name="/usr/bin/evince-previewer" [ 24.792752] ndiswrapper: driver net5416 (Linksys, A Division of Cisco Systems, Inc.,10/16/2007,6.0.3.120) loaded [ 24.793863] ndiswrapper 0000:06:00.0: enabling device (0000 -> 0002) [ 24.793902] ndiswrapper 0000:06:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 24.795302] ndiswrapper 0000:06:00.0: setting latency timer to 64 [ 24.865982] type=1505 audit(1291522061.749:11): operation="profile_load" pid=765 name="/usr/bin/evince-thumbnailer" [ 25.658988] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 25.659002] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 25.659013] thinkpad_acpi: ThinkPad BIOS KXET36WW (1.09 ), EC unknown [ 25.666463] Registered led device: tpacpi::thinklight [ 25.667070] Registered led device: tpacpi::power [ 25.667402] Registered led device: tpacpi::standby [ 25.681381] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 25.686557] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 25.782168] ttyS1: LSR safety check engaged! [ 25.782319] ttyS1: LSR safety check engaged! [ 25.809665] ttyS1: LSR safety check engaged! [ 25.965992] ndiswrapper: using IRQ 11 [ 26.208880] wlan0: ethernet device 00:21:29:69:35:5a using serialized NDIS driver: net5416, version: 0x60000, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:0023.5.conf [ 26.317538] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 26.323302] usbcore: registered new interface driver ndiswrapper [ 26.489551] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.740572] Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 27.450651] gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1754kHz [ 41.206713] input: Mouseemu virtual keyboard as /devices/virtual/input/input8 [ 41.207375] input: Mouseemu virtual mouse as /devices/virtual/input/input9 [ 42.265266] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 42.279755] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 53.104050] wlan0: no IPv6 routers present [ 76.641758] ttyS1: LSR safety check engaged! [ 97.572536] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 157.428562] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 218.202644] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 278.641224] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 353.281417] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [25062.642771] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [31502.262230] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [37578.137687] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [40152.908977] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [40162.929925] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [40201.790195] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [40211.810040] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [40221.832981] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [40241.893968] ndiswrapper (iw_set_auth:1602): invalid cmd 12