[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-16-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] modified: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-15000 [ 0.000000] RAMDISK: 1f894000 - 1ffdf494 [ 0.000000] ACPI: RSDP 000f7df0 00014 (v00 AWARD ) [ 0.000000] ACPI: RSDT 1fff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 1fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 1fff30c0 03DED (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 1fff0000 00040 [ 0.000000] ACPI: APIC 1fff6ec0 0007C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] node 0 low ram: 00000000 - 1fff0000 [ 0.000000] node 0 bootmap 00011000 - 00015000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [001f894000 - 001ffdf494] RAMDISK ==> [001f894000 - 001ffdf494] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac096] BRK ==> [00008a9000 - 00008ac096] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000] [ 0.000000] found SMP MP-table at [c00f64b0] f64b0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130943 [ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1402000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129919 [ 0.000000] Kernel command line: root=UUID=ee293167-5ada-4312-b9ce-3570ba4ac8d6 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2620800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 500976k/524224k available (4566k kernel code, 22528k reserved, 2142k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2600.401 MHz processor. [ 0.001382] Console: colour VGA+ 80x25 [ 0.001388] console [tty0] enabled [ 0.001437] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.80 BogoMIPS (lpj=10401604) [ 0.001465] Security Framework initialized [ 0.001489] AppArmor: AppArmor initialized [ 0.001499] Mount-cache hash table entries: 512 [ 0.001680] Initializing cgroup subsys ns [ 0.001687] Initializing cgroup subsys cpuacct [ 0.001692] Initializing cgroup subsys memory [ 0.001702] Initializing cgroup subsys freezer [ 0.001705] Initializing cgroup subsys net_cls [ 0.001727] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.001731] CPU: L2 cache: 512K [ 0.001735] CPU: Hyper-Threading is disabled [ 0.001740] mce: CPU supports 4 MCE banks [ 0.001753] CPU0: Thermal monitoring enabled (TM1) [ 0.001764] Performance Counters: no PMU driver, software counters only. [ 0.001774] Checking 'hlt' instruction... OK. [ 0.016983] SMP alternatives: switching to UP code [ 0.027607] ACPI: Core revision 20090521 [ 0.039660] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079356] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 [ 0.080001] Brought up 1 CPUs [ 0.080001] Total of 1 processors activated (5200.80 BogoMIPS). [ 0.080001] CPU0 attaching NULL sched-domain. [ 0.080001] Booting paravirtualized kernel on bare hardware [ 0.080001] regulator: core version 0.5 [ 0.080001] Time: 20:16:47 Date: 01/28/10 [ 0.080001] NET: Registered protocol family 16 [ 0.080001] EISA bus registered [ 0.080001] ACPI: bus type pci registered [ 0.116219] PCI: PCI BIOS revision 2.10 entry at 0xfb810, last bus=1 [ 0.116222] PCI: Using configuration type 1 for base access [ 0.117457] bio: create slab at 0 [ 0.118144] ACPI: EC: Look up EC in DSDT [ 0.124701] ACPI: Interpreter enabled [ 0.124710] ACPI: (supports S0 S3 S4 S5) [ 0.124742] ACPI: Using IOAPIC for interrupt routing [ 0.129887] ACPI: No dock devices found. [ 0.130019] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.130078] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.130249] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.130306] pci 0000:00:02.1: reg 20 io port: [0x10c0-0x10df] [ 0.130366] pci 0000:00:02.3: reg 10 32bit mmio: [0xe3406000-0xe3406fff] [ 0.130404] pci 0000:00:02.3: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.130428] pci 0000:00:02.3: supports D1 D2 [ 0.130431] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.130437] pci 0000:00:02.3: PME# disabled [ 0.130480] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] [ 0.130489] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] [ 0.130497] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] [ 0.130505] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] [ 0.130514] pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] [ 0.130549] pci 0000:00:02.5: PME# supported from D3cold [ 0.130554] pci 0000:00:02.5: PME# disabled [ 0.130598] pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] [ 0.130607] pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f] [ 0.130660] pci 0000:00:02.7: supports D1 D2 [ 0.130662] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.130668] pci 0000:00:02.7: PME# disabled [ 0.130697] pci 0000:00:03.0: reg 10 32bit mmio: [0xe3400000-0xe3400fff] [ 0.130762] pci 0000:00:03.1: reg 10 32bit mmio: [0xe3401000-0xe3401fff] [ 0.130828] pci 0000:00:03.2: reg 10 32bit mmio: [0xe3402000-0xe3402fff] [ 0.130906] pci 0000:00:03.3: reg 10 32bit mmio: [0xe3403000-0xe3403fff] [ 0.130967] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.130973] pci 0000:00:03.3: PME# disabled [ 0.131022] pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff] [ 0.131031] pci 0000:00:04.0: reg 14 32bit mmio: [0xe3404000-0xe3404fff] [ 0.131063] pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.131086] pci 0000:00:04.0: supports D1 D2 [ 0.131089] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131094] pci 0000:00:04.0: PME# disabled [ 0.131138] pci 0000:00:06.0: reg 10 io port: [0xec00-0xecff] [ 0.131147] pci 0000:00:06.0: reg 14 32bit mmio: [0xe3405000-0xe34053ff] [ 0.131179] pci 0000:00:06.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.131202] pci 0000:00:06.0: supports D1 D2 [ 0.131205] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131210] pci 0000:00:06.0: PME# disabled [ 0.131258] pci 0000:00:07.0: reg 10 32bit mmio: [0xe3000000-0xe33fffff] [ 0.131316] pci 0000:00:07.0: supports D2 [ 0.131319] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold [ 0.131324] pci 0000:00:07.0: PME# disabled [ 0.131415] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff] [ 0.131423] pci 0000:01:00.0: reg 14 32bit mmio: [0xd8000000-0xdfffffff] [ 0.131448] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.131522] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff] [ 0.131529] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.131540] pci_bus 0000:00: on NUMA node 0 [ 0.131546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.159742] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.159875] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.160020] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.160152] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.160283] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.160415] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.160551] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.160685] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.160967] SCSI subsystem initialized [ 0.161065] libata version 3.00 loaded. [ 0.161168] usbcore: registered new interface driver usbfs [ 0.161193] usbcore: registered new interface driver hub [ 0.161226] usbcore: registered new device driver usb [ 0.161399] ACPI: WMI: Mapper loaded [ 0.161402] PCI: Using ACPI for IRQ routing [ 0.161592] Bluetooth: Core ver 2.15 [ 0.161637] NET: Registered protocol family 31 [ 0.161640] Bluetooth: HCI device and connection manager initialized [ 0.161644] Bluetooth: HCI socket layer initialized [ 0.161647] NetLabel: Initializing [ 0.161650] NetLabel: domain hash size = 128 [ 0.161651] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.161671] NetLabel: unlabeled traffic allowed by default [ 0.163858] pnp: PnP ACPI init [ 0.163897] ACPI: bus type pnp registered [ 0.168241] pnp: PnP ACPI: found 13 devices [ 0.168245] ACPI: ACPI bus type pnp unregistered [ 0.168251] PnPBIOS: Disabled by ACPI PNP [ 0.168268] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 0.168273] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.168277] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.168281] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.168285] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved [ 0.168289] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.168293] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.168296] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.168300] system 00:00: iomem range 0xffee0000-0xffefffff has been reserved [ 0.168304] system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved [ 0.168308] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.168311] system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.168321] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.168326] system 00:02: ioport range 0x294-0x297 has been reserved [ 0.203052] AppArmor: AppArmor Filesystem Enabled [ 0.203087] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.203090] pci 0000:00:01.0: IO window: disabled [ 0.203098] pci 0000:00:01.0: MEM window: 0xe0000000-0xe1ffffff [ 0.203104] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff [ 0.203123] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.203126] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.203130] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe1ffffff] [ 0.203133] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] [ 0.203184] NET: Registered protocol family 2 [ 0.203310] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.203649] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.203749] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.203841] TCP: Hash tables configured (established 16384 bind 16384) [ 0.203844] TCP reno registered [ 0.203937] NET: Registered protocol family 1 [ 0.204060] Trying to unpack rootfs image as initramfs... [ 0.456428] Freeing initrd memory: 7469k freed [ 0.467497] cpufreq-nforce2: No nForce2 chipset. [ 0.467539] Scanning for low memory corruption every 60 seconds [ 0.467715] audit: initializing netlink socket (disabled) [ 0.467743] type=2000 audit(1264709806.463:1): initialized [ 0.476561] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.478188] VFS: Disk quotas dquot_6.5.2 [ 0.478259] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.478957] fuse init (API version 7.12) [ 0.479062] msgmni has been set to 993 [ 0.479340] alg: No test for stdrng (krng) [ 0.479358] io scheduler noop registered [ 0.479361] io scheduler anticipatory registered [ 0.479363] io scheduler deadline registered [ 0.479430] io scheduler cfq registered (default) [ 0.563998] pci 0000:01:00.0: Boot video device [ 0.564119] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.564151] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.564318] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.564324] ACPI: Power Button [PWRF] [ 0.564386] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.564390] ACPI: Power Button [PWRB] [ 0.564454] fan PNP0C0B:00: registered as cooling_device0 [ 0.564461] ACPI: Fan [FAN] (on) [ 0.564781] processor LNXCPU:00: registered as cooling_device1 [ 0.567913] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.567923] ACPI: Thermal Zone [THRM] (49 C) [ 0.568007] isapnp: Scanning for PnP cards... [ 0.731962] Switched to high resolution mode on CPU 0 [ 0.921791] isapnp: No Plug & Play device found [ 0.923320] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.923443] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.923852] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.925124] brd: module loaded [ 0.925666] loop: module loaded [ 0.925781] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.926482] pata_sis 0000:00:02.5: version 0.5.2 [ 0.926508] alloc irq_desc for 16 on node -1 [ 0.926512] alloc kstat_irqs on node -1 [ 0.926523] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.926745] scsi0 : pata_sis [ 0.926883] scsi1 : pata_sis [ 0.927968] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14 [ 0.927972] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15 [ 0.928443] Fixed MDIO Bus: probed [ 0.928493] PPP generic driver version 2.4.2 [ 0.928635] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.928665] alloc irq_desc for 23 on node -1 [ 0.928668] alloc kstat_irqs on node -1 [ 0.928678] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.928702] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.928780] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.928823] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported [ 0.928842] ehci_hcd 0000:00:03.3: irq 23, io mem 0xe3403000 [ 0.940019] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.940136] usb usb1: configuration #1 chosen from 1 choice [ 0.940179] hub 1-0:1.0: USB hub found [ 0.940192] hub 1-0:1.0: 6 ports detected [ 0.940270] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.940306] alloc irq_desc for 20 on node -1 [ 0.940310] alloc kstat_irqs on node -1 [ 0.940317] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.940335] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.940386] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.940413] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe3400000 [ 0.998089] usb usb2: configuration #1 chosen from 1 choice [ 0.998124] hub 2-0:1.0: USB hub found [ 0.998136] hub 2-0:1.0: 2 ports detected [ 0.998192] alloc irq_desc for 21 on node -1 [ 0.998195] alloc kstat_irqs on node -1 [ 0.998201] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.998214] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.998261] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.998286] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe3401000 [ 1.054082] usb usb3: configuration #1 chosen from 1 choice [ 1.054118] hub 3-0:1.0: USB hub found [ 1.054129] hub 3-0:1.0: 2 ports detected [ 1.054183] alloc irq_desc for 22 on node -1 [ 1.054186] alloc kstat_irqs on node -1 [ 1.054192] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.054206] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 1.054248] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 1.054272] ohci_hcd 0000:00:03.2: irq 22, io mem 0xe3402000 [ 1.110076] usb usb4: configuration #1 chosen from 1 choice [ 1.110112] hub 4-0:1.0: USB hub found [ 1.110125] hub 4-0:1.0: 2 ports detected [ 1.110186] uhci_hcd: USB Universal Host Controller Interface driver [ 1.110328] PNP: No PS/2 controller found. Probing ports directly. [ 1.110619] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.110627] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.110713] mice: PS/2 mouse device common for all mice [ 1.110823] rtc_cmos 00:04: RTC can wake from S4 [ 1.110883] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.110908] rtc0: alarms up to one year, 242 bytes nvram [ 1.111041] device-mapper: uevent: version 1.0.3 [ 1.111184] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.111283] device-mapper: multipath: version 1.1.0 loaded [ 1.111287] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.111450] EISA: Probing bus 0 at eisa.0 [ 1.111460] Cannot allocate resource for EISA slot 1 [ 1.111470] Cannot allocate resource for EISA slot 4 [ 1.111487] EISA: Detected 0 cards. [ 1.111549] cpuidle: using governor ladder [ 1.111552] cpuidle: using governor menu [ 1.112225] TCP cubic registered [ 1.112379] NET: Registered protocol family 10 [ 1.112923] lo: Disabled Privacy Extensions [ 1.113297] NET: Registered protocol family 17 [ 1.113326] Bluetooth: L2CAP ver 2.13 [ 1.113329] Bluetooth: L2CAP socket layer initialized [ 1.113333] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.113334] Bluetooth: SCO socket layer initialized [ 1.113397] Bluetooth: RFCOMM TTY layer initialized [ 1.113401] Bluetooth: RFCOMM socket layer initialized [ 1.113403] Bluetooth: RFCOMM ver 1.11 [ 1.113452] Using IPI No-Shortcut mode [ 1.113561] PM: Resume from disk failed. [ 1.113587] registered taskstats version 1 [ 1.113723] Magic number: 10:913:296 [ 1.113762] tty tty29: hash matches [ 1.113830] rtc_cmos 00:04: setting system clock to 2010-01-28 20:16:48 UTC (1264709808) [ 1.113835] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.113838] EDD information not available. [ 1.148384] ata1.00: ATA-6: ST380012A, 4.04, max UDMA/100 [ 1.148388] ata1.00: 156301488 sectors, multi 16: LBA48 [ 1.164414] ata1.00: configured for UDMA/100 [ 1.164571] scsi 0:0:0:0: Direct-Access ATA ST380012A 4.04 PQ: 0 ANSI: 5 [ 1.164753] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.164810] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.164873] sd 0:0:0:0: [sda] Write Protect is off [ 1.164877] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.164908] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.165085] sda: sda1 sda2 < sda5 > [ 1.209653] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.420015] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 1.440267] ata2.00: ATAPI: PIONEER DVD RW DVR-106D, 1.05, max UDMA/33 [ 1.440313] ata2.01: ATAPI: SONY DVD-ROM DDU1612, DYS3, max UDMA/33 [ 1.448286] ata2.00: configured for UDMA/33 [ 1.448764] ata2.01: configured for UDMA/33 [ 1.455290] scsi 1:0:0:0: CD-ROM PIONEER DVD RW DVR-106D 1.05 PQ: 0 ANSI: 5 [ 1.478761] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 1.478767] Uniform CD-ROM driver Revision: 3.20 [ 1.478888] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.478970] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.479246] scsi 1:0:1:0: CD-ROM SONY DVD-ROM DDU1612 DYS3 PQ: 0 ANSI: 5 [ 1.480679] sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray [ 1.480783] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.480842] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 1.480874] Freeing unused kernel memory: 540k freed [ 1.481564] Write protecting the kernel text: 4568k [ 1.481598] Write protecting the kernel read-only data: 1836k [ 1.587648] usb 1-5: configuration #1 chosen from 1 choice [ 1.589320] hub 1-5:1.0: USB hub found [ 1.590750] hub 1-5:1.0: 4 ports detected [ 1.762944] alloc irq_desc for 17 on node -1 [ 1.762950] alloc kstat_irqs on node -1 [ 1.762961] ohci1394 0000:00:02.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.773631] Linux agpgart interface v0.103 [ 1.819280] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e3406000-e34067ff] Max Packet=[2048] IR/IT contexts=[4/6] [ 1.887340] Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 1.891504] sis900.c: v1.08.10 Apr. 2 2006 [ 1.894017] Floppy drive(s): fd0 is 1.44M [ 1.912125] FDC 0 is a post-1991 82077 [ 1.919456] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648] [ 1.930249] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 1.940442] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 1.940987] tulip 0000:00:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.941583] tulip0: MII transceiver #1 config 3100 status 7849 advertising 05e1. [ 1.949091] eth0: ADMtek Comet rev 17 at Port 0xec00, 00:0c:f6:31:b3:cb, IRQ 17. [ 1.949998] alloc irq_desc for 19 on node -1 [ 1.950002] alloc kstat_irqs on node -1 [ 1.950014] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.951080] 0000:00:04.0: Unknown PHY transceiver found at address 0. [ 1.951835] 0000:00:04.0: VIA 6103 PHY transceiver found at address 1. [ 1.952654] 0000:00:04.0: Unknown PHY transceiver found at address 2. [ 1.953408] 0000:00:04.0: Unknown PHY transceiver found at address 3. [ 1.954162] 0000:00:04.0: Unknown PHY transceiver found at address 4. [ 1.954950] 0000:00:04.0: Unknown PHY transceiver found at address 5. [ 1.956248] 0000:00:04.0: Unknown PHY transceiver found at address 6. [ 1.957002] 0000:00:04.0: Unknown PHY transceiver found at address 7. [ 1.957754] 0000:00:04.0: Unknown PHY transceiver found at address 8. [ 1.958506] 0000:00:04.0: Unknown PHY transceiver found at address 9. [ 1.959259] 0000:00:04.0: Unknown PHY transceiver found at address 10. [ 1.960036] 0000:00:04.0: Unknown PHY transceiver found at address 11. [ 1.960870] 0000:00:04.0: Unknown PHY transceiver found at address 12. [ 1.961622] 0000:00:04.0: Unknown PHY transceiver found at address 13. [ 1.962407] 0000:00:04.0: Unknown PHY transceiver found at address 14. [ 1.963160] 0000:00:04.0: Unknown PHY transceiver found at address 15. [ 1.963912] 0000:00:04.0: Unknown PHY transceiver found at address 16. [ 1.964681] 0000:00:04.0: Unknown PHY transceiver found at address 17. [ 1.965436] 0000:00:04.0: Unknown PHY transceiver found at address 18. [ 1.966194] 0000:00:04.0: Unknown PHY transceiver found at address 19. [ 1.966946] 0000:00:04.0: Unknown PHY transceiver found at address 20. [ 1.967699] 0000:00:04.0: Unknown PHY transceiver found at address 21. [ 1.968909] 0000:00:04.0: Unknown PHY transceiver found at address 22. [ 1.969665] 0000:00:04.0: Unknown PHY transceiver found at address 23. [ 1.970419] 0000:00:04.0: Unknown PHY transceiver found at address 24. [ 1.971172] 0000:00:04.0: Unknown PHY transceiver found at address 25. [ 1.971969] 0000:00:04.0: Unknown PHY transceiver found at address 26. [ 1.973095] 0000:00:04.0: Unknown PHY transceiver found at address 27. [ 1.973850] 0000:00:04.0: Unknown PHY transceiver found at address 28. [ 1.974601] 0000:00:04.0: Unknown PHY transceiver found at address 29. [ 1.975356] 0000:00:04.0: Unknown PHY transceiver found at address 30. [ 1.976129] 0000:00:04.0: Unknown PHY transceiver found at address 31. [ 1.999722] 0000:00:04.0: Using transceiver found at address 1 as default [ 2.012710] eth1: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:0c:76:75:b3:91 [ 2.151895] usb 3-1: configuration #1 chosen from 1 choice [ 2.169419] Initializing USB Mass Storage driver... [ 2.169579] scsi2 : SCSI emulation for USB Mass Storage devices [ 2.169695] usbcore: registered new interface driver usb-storage [ 2.169700] USB Mass Storage support registered. [ 2.169827] usb-storage: device found at 2 [ 2.169829] usb-storage: waiting for device to settle before scanning [ 2.468020] usb 4-1: new low speed USB device using ohci_hcd and address 2 [ 2.690779] usb 4-1: configuration #1 chosen from 1 choice [ 2.702135] usbcore: registered new interface driver hiddev [ 2.713006] input: HID 1241:1166 as /devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0/input/input3 [ 2.713129] generic-usb 0003:1241:1166.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:03.2-1/input0 [ 2.713156] usbcore: registered new interface driver usbhid [ 2.713161] usbhid: v2.6:USB HID core driver [ 2.772292] usb 1-5.1: new full speed USB device using ehci_hcd and address 5 [ 2.912163] usb 1-5.1: configuration #1 chosen from 1 choice [ 2.976272] PM: Starting manual resume from disk [ 2.976288] PM: Resume from partition 8:5 [ 2.976290] PM: Checking hibernation image. [ 2.977634] PM: Resume from disk failed. [ 2.996371] usb 1-5.2: new low speed USB device using ehci_hcd and address 6 [ 3.001567] EXT3-fs: INFO: recovery required on readonly filesystem. [ 3.001571] EXT3-fs: write access will be enabled during recovery. [ 3.100598] usb 1-5.2: configuration #1 chosen from 1 choice [ 3.107802] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5.2/1-5.2:1.0/input/input4 [ 3.107940] generic-usb 0003:04F2:0200.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:03.3-5.2/input0 [ 3.188198] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc00490e75] [ 6.689488] kjournald starting. Commit interval 5 seconds [ 6.689522] EXT3-fs: sda1: orphan cleanup on readonly fs [ 6.689531] ext3_orphan_cleanup: deleting unreferenced inode 493761 [ 6.689599] ext3_orphan_cleanup: deleting unreferenced inode 493760 [ 6.689613] EXT3-fs: sda1: 2 orphan inodes deleted [ 6.689616] EXT3-fs: recovery complete. [ 6.727819] EXT3-fs: mounted filesystem with writeback data mode. [ 7.169572] usb-storage: device scan complete [ 7.209549] scsi 2:0:0:0: Direct-Access Medion Flash XL CF 3.0A PQ: 0 ANSI: 0 CCS [ 7.216532] scsi 2:0:0:1: Direct-Access Medion Flash XL MS 3.0A PQ: 0 ANSI: 0 CCS [ 7.223526] scsi 2:0:0:2: Direct-Access Medion Flash XL MMC/SD 3.0A PQ: 0 ANSI: 0 CCS [ 7.230534] scsi 2:0:0:3: Direct-Access Medion Flash XL SM 3.0A PQ: 0 ANSI: 0 CCS [ 7.231084] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 7.231198] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 7.231312] sd 2:0:0:2: Attached scsi generic sg5 type 0 [ 7.231427] sd 2:0:0:3: Attached scsi generic sg6 type 0 [ 7.487471] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 7.498472] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 7.509460] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 7.520472] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 7.668254] type=1505 audit(1264709815.054:2): operation="profile_load" pid=403 name=/usr/share/gdm/guest-session/Xsession [ 7.711076] type=1505 audit(1264709815.094:3): operation="profile_load" pid=406 name=/sbin/dhclient3 [ 7.711714] type=1505 audit(1264709815.094:4): operation="profile_load" pid=406 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 7.712094] type=1505 audit(1264709815.098:5): operation="profile_load" pid=406 name=/usr/lib/connman/scripts/dhclient-script [ 7.765962] type=1505 audit(1264709815.150:6): operation="profile_load" pid=411 name=/usr/bin/evince [ 7.779036] type=1505 audit(1264709815.162:7): operation="profile_load" pid=411 name=/usr/bin/evince-previewer [ 7.785571] type=1505 audit(1264709815.170:8): operation="profile_load" pid=411 name=/usr/bin/evince-thumbnailer [ 7.815428] type=1505 audit(1264709815.198:9): operation="profile_load" pid=417 name=/usr/lib/cups/backend/cups-pdf [ 7.816218] type=1505 audit(1264709815.202:10): operation="profile_load" pid=417 name=/usr/sbin/cupsd [ 7.824452] type=1505 audit(1264709815.210:11): operation="profile_load" pid=420 name=/usr/sbin/tcpdump [ 13.124112] /build/buildd/linux-2.6.31/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed [ 13.124139] generic-usb 0003:04F2:0200.0003: timeout initializing reports [ 13.124271] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5.2/1-5.2:1.1/input/input5 [ 13.124456] generic-usb 0003:04F2:0200.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:03.3-5.2/input1 [ 13.129078] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5.2/1-5.2:1.2/input/input6 [ 13.129196] generic-usb 0003:04F2:0200.0004: input,hidraw3: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:03.3-5.2/input2 [ 27.020287] udev: starting version 147 [ 27.031718] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k [ 27.094867] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0 [ 27.158272] lp: driver loaded but no devices found [ 27.199535] parport_pc 00:09: reported by Plug and Play ACPI [ 27.199653] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 27.204475] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 27.275037] udev: renamed network interface eth0 to eth1 [ 27.288528] lp0: using parport0 (interrupt-driven). [ 27.289406] EXT3 FS on sda1, internal journal [ 27.413687] udev: renamed network interface eth1_rename to eth0 [ 27.939577] nvidia: module license 'NVIDIA' taints kernel. [ 27.939584] Disabling lock debugging due to kernel taint [ 28.250173] Linux video capture interface: v2.00 [ 28.336805] gspca: main v2.6.0 registered [ 28.338342] gspca: probing 093a:2468 [ 28.340957] ppdev: user-space parallel port driver [ 28.382526] pac207: Pixart Sensor ID 0x27 Chips ID 0x00 [ 28.382532] pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2468) [ 28.383515] gspca: probe ok [ 28.383552] usbcore: registered new interface driver pac207 [ 28.383556] pac207: registered [ 28.416112] gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 764kHz [ 28.446192] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.660453] alloc irq_desc for 18 on node -1 [ 28.660458] alloc kstat_irqs on node -1 [ 28.660468] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 29.020543] intel8x0_measure_ac97_clock: measured 58105 usecs (2795 samples) [ 29.020549] intel8x0: clocking to 48000 [ 29.189795] type=1505 audit(1264709836.574:12): operation="profile_replace" pid=1018 name=/usr/share/gdm/guest-session/Xsession [ 29.212601] type=1505 audit(1264709836.598:13): operation="profile_replace" pid=1019 name=/sbin/dhclient3 [ 29.213243] type=1505 audit(1264709836.598:14): operation="profile_replace" pid=1019 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 29.213592] type=1505 audit(1264709836.598:15): operation="profile_replace" pid=1019 name=/usr/lib/connman/scripts/dhclient-script [ 29.228879] type=1505 audit(1264709836.614:16): operation="profile_replace" pid=1020 name=/usr/bin/evince [ 29.236427] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 29.236790] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009 [ 29.252429] type=1505 audit(1264709836.638:17): operation="profile_replace" pid=1020 name=/usr/bin/evince-previewer [ 29.266934] type=1505 audit(1264709836.650:18): operation="profile_replace" pid=1020 name=/usr/bin/evince-thumbnailer [ 29.296253] type=1505 audit(1264709836.682:19): operation="profile_replace" pid=1027 name=/usr/lib/cups/backend/cups-pdf [ 29.297009] type=1505 audit(1264709836.682:20): operation="profile_replace" pid=1027 name=/usr/sbin/cupsd [ 29.308817] type=1505 audit(1264709836.694:21): operation="profile_replace" pid=1028 name=/usr/sbin/tcpdump [ 30.414128] agpgart-sis 0000:00:00.0: AGP 3.5 bridge [ 30.414152] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode [ 30.414157] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover [ 30.429774] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode [ 31.800781] eth0: Media Link On 100mbps full-duplex [ 39.200010] eth0: no IPv6 routers present [ 39.796009] eth1: no IPv6 routers present [ 40.992021] usb 3-1: reset full speed USB device using ohci_hcd and address 2 [ 48.992020] usb 3-1: reset full speed USB device using ohci_hcd and address 2 [ 56.992019] usb 3-1: reset full speed USB device using ohci_hcd and address 2 [ 64.992021] usb 3-1: reset full speed USB device using ohci_hcd and address 2 [ 72.992021] usb 3-1: reset full speed USB device using ohci_hcd and address 2 [ 80.992018] usb 3-1: reset full speed USB device using ohci_hcd and address 2 [ 88.992020] usb 3-1: reset full speed USB device using ohci_hcd and address 2 [ 96.992021] usb 3-1: reset full speed USB device using ohci_hcd and address 2