[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02 [ 0.000000] Linux version 4.15.0-34-generic (buildd@lgw01-amd64-047) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #37-Ubuntu SMP Mon Aug 27 15:21:48 UTC 2018 (Ubuntu 4.15.0-34.37-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=cb3303a1-3eab-419d-94ea-277638124bb0 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b8b7efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b8b7f000-0x00000000b9e7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9e7f000-0x00000000b9f7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b9f7f000-0x00000000b9ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba000000-0x00000000bf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff990000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP ProBook 440 G1/1944, BIOS L74 Ver. 01.09 04/29/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect [ 0.000000] 1 base 0000000000 mask 7F80000000 write-back [ 0.000000] 2 base 0080000000 mask 7FC0000000 write-back [ 0.000000] 3 base 00BC000000 mask 7FFC000000 uncachable [ 0.000000] 4 base 00BB000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back [ 0.000000] 7 base 0400000000 mask 7FC0000000 write-back [ 0.000000] 8 base 043FE00000 mask 7FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x198b3f000, 0x198b3ffff] PGTABLE [ 0.000000] BRK [0x198b40000, 0x198b40fff] PGTABLE [ 0.000000] BRK [0x198b41000, 0x198b41fff] PGTABLE [ 0.000000] BRK [0x198b42000, 0x198b42fff] PGTABLE [ 0.000000] BRK [0x198b43000, 0x198b43fff] PGTABLE [ 0.000000] BRK [0x198b44000, 0x198b44fff] PGTABLE [ 0.000000] BRK [0x198b45000, 0x198b45fff] PGTABLE [ 0.000000] BRK [0x198b46000, 0x198b46fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31728000-0x34b8bfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F2FE0 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000B9FFE120 00008C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000B9FFC000 00010C (v05 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000B9FD2000 02411E (v02 HPQOEM 1944 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x00000000B9E31000 000040 [ 0.000000] ACPI: FACS 0x00000000B9E31000 000040 [ 0.000000] ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000B9FFA000 0000BC (v01 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: ASF! 0x00000000B9FF8000 0000A5 (v32 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000B9FF7000 000032 (v02 HPQOEM 1944 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000B9FCF000 000421 (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: FPDT 0x00000000B9FCC000 000044 (v01 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x00000000B9FCB000 000038 (v00 HPQOEM 1944 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000B9FCA000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FC9000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FC8000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x43fdd5000-0x43fdfffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000043fdfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b8b7efff] [ 0.000000] node 0: [mem 0x00000000b9fff000-0x00000000b9ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000043fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fdfffff] [ 0.000000] On node 0 totalpages: 4163868 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11758 pages used for memmap [ 0.000000] DMA32 zone: 752512 pages, LIFO batch:31 [ 0.000000] Normal zone: 53240 pages used for memmap [ 0.000000] Normal zone: 3407360 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] Reserving Intel graphics memory at 0x00000000bb200000-0x00000000bf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8b7f000-0xb9e7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9e7f000-0xb9f7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9f7f000-0xb9ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff98ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff990000-0xffffffff] [ 0.000000] e820: [mem 0xbf200000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4098785 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=cb3303a1-3eab-419d-94ea-277638124bb0 ro quiet splash vt.handoff=7 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16243996K/16655472K available (12300K kernel code, 2471K rwdata, 4244K rodata, 2408K init, 2416K bss, 411476K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39147 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2494.348 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.69 BogoMIPS (lpj=9977392) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.028954] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029037] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029238] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.029239] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.029243] mce: CPU supports 7 MCE banks [ 0.029251] CPU0: Thermal monitoring enabled (TM1) [ 0.029261] process: using mwait in idle threads [ 0.029264] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.029264] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.029266] Spectre V2 : Mitigation: Full generic retpoline [ 0.029266] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.029267] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.029510] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.035280] Freeing SMP alternatives memory: 36K [ 0.040062] TSC deadline timer enabled [ 0.040064] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.040127] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.040167] ... version: 3 [ 0.040167] ... bit width: 48 [ 0.040168] ... generic registers: 4 [ 0.040169] ... value mask: 0000ffffffffffff [ 0.040169] ... max period: 00007fffffffffff [ 0.040170] ... fixed-purpose events: 3 [ 0.040170] ... event mask: 000000070000000f [ 0.040203] Hierarchical SRCU implementation. [ 0.041396] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.041409] smp: Bringing up secondary CPUs ... [ 0.041475] x86: Booting SMP configuration: [ 0.041476] .... node #0, CPUs: #1 #2 #3 [ 0.044379] smp: Brought up 1 node, 4 CPUs [ 0.044379] smpboot: Max logical packages: 2 [ 0.044379] smpboot: Total of 4 processors activated (19954.78 BogoMIPS) [ 0.048296] devtmpfs: initialized [ 0.048296] x86/mm: Memory block size: 128MB [ 0.049152] evm: security.selinux [ 0.049152] evm: security.SMACK64 [ 0.049153] evm: security.SMACK64EXEC [ 0.049153] evm: security.SMACK64TRANSMUTE [ 0.049154] evm: security.SMACK64MMAP [ 0.049154] evm: security.apparmor [ 0.049154] evm: security.ima [ 0.049155] evm: security.capability [ 0.049170] PM: Registering ACPI NVS region [mem 0xb9e7f000-0xb9f7efff] (1048576 bytes) [ 0.049170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.049170] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.049170] pinctrl core: initialized pinctrl subsystem [ 0.049170] RTC time: 4:15:38, date: 10/01/18 [ 0.049170] NET: Registered protocol family 16 [ 0.049170] audit: initializing netlink subsys (disabled) [ 0.049170] audit: type=2000 audit(1538367338.048:1): state=initialized audit_enabled=0 res=1 [ 0.049170] cpuidle: using governor ladder [ 0.049170] cpuidle: using governor menu [ 0.049170] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.049170] ACPI: bus type PCI registered [ 0.049170] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.049170] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.049170] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.049170] PCI: Using configuration type 1 for base access [ 0.049170] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.049170] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.049170] mtrr: probably your BIOS does not setup all CPUs. [ 0.049170] mtrr: corrected configuration. [ 0.049174] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.049174] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.049174] ACPI: Added _OSI(Module Device) [ 0.049174] ACPI: Added _OSI(Processor Device) [ 0.049174] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.049174] ACPI: Added _OSI(Processor Aggregator Device) [ 0.049174] ACPI: Added _OSI(Linux-Dell-Video) [ 0.049174] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.060031] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.069982] ACPI: Dynamic OEM Table Load: [ 0.069988] ACPI: SSDT 0xFFFF91F8ED2D5000 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.070541] ACPI: Dynamic OEM Table Load: [ 0.070546] ACPI: SSDT 0xFFFF91F8ED230800 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.071148] ACPI: Dynamic OEM Table Load: [ 0.071152] ACPI: SSDT 0xFFFF91F8ED21E600 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.072395] ACPI: EC: EC started [ 0.072395] ACPI: EC: interrupt blocked [ 1.628918] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 1.628920] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.628921] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 1.628922] ACPI: Interpreter enabled [ 1.628951] ACPI: (supports S0 S3 S4 S5) [ 1.628952] ACPI: Using IOAPIC for interrupt routing [ 1.628976] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.629320] ACPI: Enabled 6 GPEs in block 00 to 3F [ 1.631475] ACPI: Power Resource [APPR] (off) [ 1.634629] ACPI: Power Resource [COMP] (on) [ 1.635007] ACPI: Power Resource [LPP] (on) [ 1.639549] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.639554] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.642112] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.642113] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.642822] PCI host bridge to bus 0000:00 [ 1.642825] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.642826] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.642827] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.642829] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window] [ 1.642830] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window] [ 1.642831] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 1.642833] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.642841] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 1.642976] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 1.642987] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 1.642993] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.642997] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 1.643155] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 1.643165] pci 0000:00:03.0: reg 0x10: [mem 0xd0910000-0xd0913fff 64bit] [ 1.643325] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 1.643344] pci 0000:00:14.0: reg 0x10: [mem 0xd0900000-0xd090ffff 64bit] [ 1.643401] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.643523] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 1.643544] pci 0000:00:16.0: reg 0x10: [mem 0xd0919000-0xd091900f 64bit] [ 1.643613] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.643735] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 1.643756] pci 0000:00:1a.0: reg 0x10: [mem 0xd091e000-0xd091e3ff] [ 1.643845] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.643966] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 1.643985] pci 0000:00:1b.0: reg 0x10: [mem 0xd0914000-0xd0917fff 64bit] [ 1.644061] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.644182] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 1.644261] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.644436] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400 [ 1.644515] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.644681] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400 [ 1.644759] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 1.644923] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400 [ 1.645001] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.645166] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 1.645187] pci 0000:00:1d.0: reg 0x10: [mem 0xd091d000-0xd091d3ff] [ 1.645275] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.645392] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100 [ 1.645607] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 1.645623] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 1.645631] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 1.645638] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 1.645645] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 1.645652] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 1.645660] pci 0000:00:1f.2: reg 0x24: [mem 0xd091c000-0xd091c7ff] [ 1.645701] pci 0000:00:1f.2: PME# supported from D3hot [ 1.645845] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.645850] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 1.645917] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.645947] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 1.645975] pci 0000:02:00.0: reg 0x18: [mem 0xd0700000-0xd0700fff 64bit] [ 1.645993] pci 0000:02:00.0: reg 0x20: [mem 0xd0400000-0xd0403fff 64bit pref] [ 1.646101] pci 0000:02:00.0: supports D1 D2 [ 1.646102] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.656022] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 1.656026] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 1.656029] pci 0000:00:1c.5: bridge window [mem 0xd0700000-0xd07fffff] [ 1.656034] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 1.656114] pci 0000:03:00.0: [8086:08b1] type 00 class 0x028000 [ 1.656193] pci 0000:03:00.0: reg 0x10: [mem 0xd0600000-0xd0601fff 64bit] [ 1.656465] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.668038] pci 0000:00:1c.6: PCI bridge to [bus 03] [ 1.668044] pci 0000:00:1c.6: bridge window [mem 0xd0600000-0xd06fffff] [ 1.668100] pci 0000:04:00.0: [10ec:5227] type 00 class 0xff0000 [ 1.668130] pci 0000:04:00.0: reg 0x10: [mem 0xd0500000-0xd0500fff] [ 1.668275] pci 0000:04:00.0: supports D1 D2 [ 1.668276] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.680023] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 1.680028] pci 0000:00:1c.7: bridge window [mem 0xd0500000-0xd05fffff] [ 1.681148] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.681213] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.681275] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.681338] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.681399] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.681461] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.681524] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.681585] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.681993] ACPI: EC: interrupt unblocked [ 1.681999] ACPI: EC: event unblocked [ 1.682013] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.682015] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 1.682205] SCSI subsystem initialized [ 1.682218] libata version 3.00 loaded. [ 1.682218] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.682218] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.682218] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.682218] vgaarb: loaded [ 1.682218] ACPI: bus type USB registered [ 1.682218] usbcore: registered new interface driver usbfs [ 1.682218] usbcore: registered new interface driver hub [ 1.682218] usbcore: registered new device driver usb [ 1.682218] EDAC MC: Ver: 3.0.0 [ 1.682218] PCI: Using ACPI for IRQ routing [ 1.684049] PCI: pci_cache_line_size set to 64 bytes [ 1.684116] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 1.684117] e820: reserve RAM buffer [mem 0xb8b7f000-0xbbffffff] [ 1.684118] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff] [ 1.684119] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff] [ 1.684203] NetLabel: Initializing [ 1.684204] NetLabel: domain hash size = 128 [ 1.684204] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.684218] NetLabel: unlabeled traffic allowed by default [ 1.688272] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.688277] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.690298] clocksource: Switched to clocksource hpet [ 1.697950] VFS: Disk quotas dquot_6.6.0 [ 1.697967] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.698068] AppArmor: AppArmor Filesystem Enabled [ 1.698094] pnp: PnP ACPI init [ 1.698396] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.698399] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 1.698400] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.698402] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.698404] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 1.698406] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.698407] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.698409] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.698410] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.698412] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved [ 1.698417] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.698656] system 00:01: [io 0x0200-0x027f] has been reserved [ 1.698658] system 00:01: [io 0xffff] has been reserved [ 1.698660] system 00:01: [io 0xffff] has been reserved [ 1.698661] system 00:01: [io 0xffff] has been reserved [ 1.698663] system 00:01: [io 0x1800-0x18fe] has been reserved [ 1.698664] system 00:01: [io 0xef80-0xef9f] has been reserved [ 1.698668] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.698722] system 00:02: [io 0x0800-0x087f] has been reserved [ 1.698726] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.698749] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.698886] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 1.698907] pnp 00:05: Plug and Play ACPI device, IDs SYN300e SYN0100 SYN0002 PNP0f13 (active) [ 1.699274] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved [ 1.699276] system 00:06: [mem 0x40004000-0x40004fff] could not be reserved [ 1.699279] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.699553] pnp 00:07: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 1.699574] pnp: PnP ACPI: found 8 devices [ 1.705593] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.705622] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 1.705624] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 1.705634] pci 0000:00:1c.7: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.705636] pci 0000:00:1c.7: BAR 13: assigned [io 0x2000-0x2fff] [ 1.705639] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.705644] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 1.705652] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 1.705655] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 1.705659] pci 0000:00:1c.5: bridge window [mem 0xd0700000-0xd07fffff] [ 1.705663] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 1.705668] pci 0000:00:1c.6: PCI bridge to [bus 03] [ 1.705673] pci 0000:00:1c.6: bridge window [mem 0xd0600000-0xd06fffff] [ 1.705680] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 1.705683] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff] [ 1.705687] pci 0000:00:1c.7: bridge window [mem 0xd0500000-0xd05fffff] [ 1.705691] pci 0000:00:1c.7: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.705697] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.705698] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.705700] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.705701] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window] [ 1.705702] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window] [ 1.705704] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window] [ 1.705705] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff] [ 1.705707] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 1.705708] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff] [ 1.705709] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref] [ 1.705711] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.705712] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 1.705713] pci_bus 0000:04: resource 1 [mem 0xd0500000-0xd05fffff] [ 1.705715] pci_bus 0000:04: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.705826] NET: Registered protocol family 2 [ 1.706007] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.706168] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.706275] TCP: Hash tables configured (established 131072 bind 65536) [ 1.706313] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.706349] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.706416] NET: Registered protocol family 1 [ 1.706427] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.706436] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 1.707306] PCI: CLS 64 bytes, default 64 [ 1.707336] Unpacking initramfs... [ 2.462178] Freeing initrd memory: 53648K [ 2.462186] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.462189] software IO TLB [mem 0xb4b7f000-0xb8b7f000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 2.462402] Scanning for low memory corruption every 60 seconds [ 2.462998] Initialise system trusted keyrings [ 2.463005] Key type blacklist registered [ 2.463041] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 2.464050] zbud: loaded [ 2.464500] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.464622] fuse init (API version 7.26) [ 2.465771] Key type asymmetric registered [ 2.465772] Asymmetric key parser 'x509' registered [ 2.465797] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.465825] io scheduler noop registered [ 2.465826] io scheduler deadline registered [ 2.465861] io scheduler cfq registered (default) [ 2.466869] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 [ 2.466888] pcieport 0000:00:1c.5: Signaling PME with IRQ 25 [ 2.466905] pcieport 0000:00:1c.6: Signaling PME with IRQ 26 [ 2.466923] pcieport 0000:00:1c.7: Signaling PME with IRQ 27 [ 2.466940] pciehp 0000:00:1c.7:pcie004: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 2.467011] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 2.467011] vesafb: scrolling: redraw [ 2.467013] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.467023] vesafb: framebuffer at 0xc0000000, mapped to 0x (ptrval), using 3072k, total 3072k [ 2.467084] Console: switching to colour frame buffer device 128x48 [ 2.467098] fb0: VESA VGA frame buffer device [ 2.467111] intel_idle: MWAIT substates: 0x42120 [ 2.467111] intel_idle: v0.4.1 model 0x3C [ 2.467245] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.904246] ACPI: AC Adapter [AC] (off-line) [ 2.904330] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 2.904342] ACPI: Sleep Button [SLPB] [ 2.904370] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 2.904376] ACPI: Lid Switch [LID] [ 2.904403] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.904469] ACPI: Power Button [PWRF] [ 2.924660] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 2.929610] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.929612] ACPI: Thermal Zone [CPUZ] (40 C) [ 2.955656] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.955657] ACPI: Thermal Zone [GFXZ] (0 C) [ 2.970672] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.970674] ACPI: Thermal Zone [EXTZ] (41 C) [ 2.985667] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.985668] ACPI: Thermal Zone [LOCZ] (31 C) [ 3.001734] thermal LNXTHERM:04: registered as thermal_zone4 [ 3.001736] ACPI: Thermal Zone [BATZ] (31 C) [ 3.002156] thermal LNXTHERM:05: registered as thermal_zone5 [ 3.002157] ACPI: Thermal Zone [PCHZ] (114 C) [ 3.002349] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.004304] Linux agpgart interface v0.103 [ 3.036536] tpm_tis 00:07: 1.2 TPM (device-id 0xB, rev-id 16) [ 3.051053] ACPI: Battery Slot [BAT0] (battery present) [ 3.176338] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value [ 3.176343] tpm tpm0: TPM is disabled/deactivated (0x7) [ 3.179434] loop: module loaded [ 3.179591] libphy: Fixed MDIO Bus: probed [ 3.179592] tun: Universal TUN/TAP device driver, 1.6 [ 3.179629] PPP generic driver version 2.4.2 [ 3.179675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.179677] ehci-pci: EHCI PCI platform driver [ 3.179871] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.179880] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.179892] ehci-pci 0000:00:1a.0: debug port 2 [ 3.183789] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.183801] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd091e000 [ 3.196018] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.196057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.196059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.196060] usb usb1: Product: EHCI Host Controller [ 3.196062] usb usb1: Manufacturer: Linux 4.15.0-34-generic ehci_hcd [ 3.196063] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.196182] hub 1-0:1.0: USB hub found [ 3.196186] hub 1-0:1.0: 2 ports detected [ 3.196468] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.196472] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.196481] ehci-pci 0000:00:1d.0: debug port 2 [ 3.200389] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.200399] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd091d000 [ 3.216018] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.216046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.216047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.216048] usb usb2: Product: EHCI Host Controller [ 3.216050] usb usb2: Manufacturer: Linux 4.15.0-34-generic ehci_hcd [ 3.216051] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.216154] hub 2-0:1.0: USB hub found [ 3.216157] hub 2-0:1.0: 2 ports detected [ 3.216279] ehci-platform: EHCI generic platform driver [ 3.216288] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.216291] ohci-pci: OHCI PCI platform driver [ 3.216299] ohci-platform: OHCI generic platform driver [ 3.216304] uhci_hcd: USB Universal Host Controller Interface driver [ 3.216476] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.216480] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.217562] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 3.217566] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.217680] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.217681] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.217683] usb usb3: Product: xHCI Host Controller [ 3.217684] usb usb3: Manufacturer: Linux 4.15.0-34-generic xhci-hcd [ 3.217685] usb usb3: SerialNumber: 0000:00:14.0 [ 3.217788] hub 3-0:1.0: USB hub found [ 3.217804] hub 3-0:1.0: 14 ports detected [ 3.218446] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.218449] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 3.218452] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.218482] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.218483] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.218484] usb usb4: Product: xHCI Host Controller [ 3.218485] usb usb4: Manufacturer: Linux 4.15.0-34-generic xhci-hcd [ 3.218487] usb usb4: SerialNumber: 0000:00:14.0 [ 3.218584] hub 4-0:1.0: USB hub found [ 3.218596] hub 4-0:1.0: 6 ports detected [ 3.218805] usb: port power management may be unreliable [ 3.218949] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.220741] i8042: Detected active multiplexing controller, rev 1.1 [ 3.221474] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.221477] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.221501] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.221517] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.221533] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.221660] mousedev: PS/2 mouse device common for all mice [ 3.221878] rtc_cmos 00:03: RTC can wake from S4 [ 3.221997] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.222021] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.222027] i2c /dev entries driver [ 3.222072] device-mapper: uevent: version 1.0.3 [ 3.222130] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 3.222135] intel_pstate: Intel P-state driver initializing [ 3.222344] ledtrig-cpu: registered to indicate activity on CPUs [ 3.222655] NET: Registered protocol family 10 [ 3.225776] Segment Routing with IPv6 [ 3.225792] NET: Registered protocol family 17 [ 3.225823] Key type dns_resolver registered [ 3.226007] RAS: Correctable Errors collector initialized. [ 3.226038] microcode: sig=0x306c3, pf=0x10, revision=0x25 [ 3.226082] microcode: Microcode Update Driver: v2.2. [ 3.226089] sched_clock: Marking stable (3226077502, 0)->(3217920549, 8156953) [ 3.226265] registered taskstats version 1 [ 3.226275] Loading compiled-in X.509 certificates [ 3.228116] Loaded X.509 cert 'Build time autogenerated kernel key: 197c80222fd2638086c51a9b9e4961ca73d6ea07' [ 3.228132] zswap: loaded using pool lzo/zbud [ 3.230551] Key type big_key registered [ 3.230553] Key type trusted registered [ 3.231716] Key type encrypted registered [ 3.231719] AppArmor: AppArmor sha1 policy hashing enabled [ 3.251041] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.258499] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value [ 3.258503] ima: No TPM chip found, activating TPM-bypass! (rc=7) [ 3.258516] ima: Allocated hash algorithm: sha1 [ 3.258540] evm: HMAC attrs: 0x1 [ 3.259031] Magic number: 6:240:261 [ 3.259095] memory memory131: hash matches [ 3.259157] rtc_cmos 00:03: setting system clock to 2018-10-01 04:15:41 UTC (1538367341) [ 3.259257] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.259257] EDD information not available. [ 3.484046] tsc: Refined TSC clocksource calibration: 2494.224 MHz [ 3.484053] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e9a353a, max_idle_ns: 440795330815 ns [ 3.532019] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.552011] usb 3-3: new full-speed USB device number 2 using xhci_hcd [ 3.552019] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.579491] Freeing unused kernel memory: 2408K [ 3.600034] Write protecting the kernel read-only data: 20480k [ 3.601105] Freeing unused kernel memory: 2008K [ 3.604336] Freeing unused kernel memory: 1900K [ 3.609250] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.609250] x86/mm: Checking user space page tables [ 3.614064] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.623606] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.623694] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.623708] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.663967] PKCS#7 signature not signed with a trusted key [ 3.664035] fjes: module verification failed: signature and/or required key missing - tainting kernel [ 3.666815] PKCS#7 signature not signed with a trusted key [ 3.667405] PKCS#7 signature not signed with a trusted key [ 3.672921] PKCS#7 signature not signed with a trusted key [ 3.673304] PKCS#7 signature not signed with a trusted key [ 3.675118] PKCS#7 signature not signed with a trusted key [ 3.677584] PKCS#7 signature not signed with a trusted key [ 3.678834] PKCS#7 signature not signed with a trusted key [ 3.679096] PKCS#7 signature not signed with a trusted key [ 3.679260] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.679269] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.679915] PKCS#7 signature not signed with a trusted key [ 3.680025] PKCS#7 signature not signed with a trusted key [ 3.680710] PKCS#7 signature not signed with a trusted key [ 3.680942] ahci 0000:00:1f.2: version 3.0 [ 3.681140] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x30 impl SATA mode [ 3.681142] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 3.682146] PKCS#7 signature not signed with a trusted key [ 3.682300] PKCS#7 signature not signed with a trusted key [ 3.682470] PKCS#7 signature not signed with a trusted key [ 3.682639] PKCS#7 signature not signed with a trusted key [ 3.683835] PKCS#7 signature not signed with a trusted key [ 3.684718] PKCS#7 signature not signed with a trusted key [ 3.684809] PKCS#7 signature not signed with a trusted key [ 3.686111] PKCS#7 signature not signed with a trusted key [ 3.686322] PKCS#7 signature not signed with a trusted key [ 3.689120] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x (ptrval), 28:80:23:06:bb:c4, XID 0c000800 IRQ 31 [ 3.689122] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.692329] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 3.692330] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.692483] hub 1-1:1.0: USB hub found [ 3.692578] hub 1-1:1.0: 6 ports detected [ 3.692794] scsi host0: ahci [ 3.693831] scsi host1: ahci [ 3.693915] scsi host2: ahci [ 3.694004] scsi host3: ahci [ 3.694096] scsi host4: ahci [ 3.694183] scsi host5: ahci [ 3.694228] ata1: DUMMY [ 3.694229] ata2: DUMMY [ 3.694230] ata3: DUMMY [ 3.694231] ata4: DUMMY [ 3.694234] ata5: SATA max UDMA/133 abar m2048@0xd091c000 port 0xd091c300 irq 30 [ 3.694236] ata6: SATA max UDMA/133 abar m2048@0xd091c000 port 0xd091c380 irq 30 [ 3.706051] usb 3-3: New USB device found, idVendor=046d, idProduct=c534 [ 3.706053] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.706055] usb 3-3: Product: USB Receiver [ 3.706056] usb 3-3: Manufacturer: Logitech [ 3.706210] PKCS#7 signature not signed with a trusted key [ 3.715219] PKCS#7 signature not signed with a trusted key [ 3.716037] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 3.721147] PKCS#7 signature not signed with a trusted key [ 3.721721] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 3.721723] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.721998] hub 2-1:1.0: USB hub found [ 3.722079] hub 2-1:1.0: 8 ports detected [ 3.727600] [drm] Memory usable by graphics device = 2048M [ 3.727603] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 3.727603] fb: switching to inteldrmfb from VESA VGA [ 3.727625] Console: switching to colour dummy device 80x25 [ 3.727697] [drm] Replacing VGA console driver [ 3.733685] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.733686] [drm] Driver supports precise vblank timestamp query. [ 3.735102] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.761195] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 3.762406] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.762777] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 3.798523] fbcon: inteldrmfb (fb0) is primary device [ 3.798572] Console: switching to colour frame buffer device 170x48 [ 3.798590] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.832069] usb 3-5: new full-speed USB device number 3 using xhci_hcd [ 3.981551] usb 3-5: New USB device found, idVendor=138a, idProduct=003f [ 3.981553] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.981555] usb 3-5: SerialNumber: 00a062ec7693 [ 4.007541] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.007558] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.011876] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 4.011881] ata6.00: ATAPI: hp DVDRAM GU90N, U900, max UDMA/100 [ 4.015895] ata5.00: ATA-8: HGST HTS545050A7E380, GG2OACA0, max UDMA/100 [ 4.015897] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.017652] ata5.00: configured for UDMA/100 [ 4.017883] scsi 4:0:0:0: Direct-Access ATA HGST HTS545050A7 ACA0 PQ: 0 ANSI: 5 [ 4.018115] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 4.018121] ata6.00: configured for UDMA/100 [ 4.018234] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 4.018287] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 4.018289] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 4.018307] sd 4:0:0:0: [sda] Write Protect is off [ 4.018310] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.018348] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.020610] scsi 5:0:0:0: CD-ROM hp DVDRAM GU90N U900 PQ: 0 ANSI: 5 [ 4.053945] sda: sda1 sda2 < sda5 > [ 4.054270] sd 4:0:0:0: [sda] Attached SCSI disk [ 4.078281] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.078282] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.078371] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 4.078436] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 4.108050] usb 3-7: new high-speed USB device number 4 using xhci_hcd [ 4.175085] random: fast init done [ 4.295305] usb 3-7: New USB device found, idVendor=04f2, idProduct=b3c8 [ 4.295307] usb 3-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 4.295308] usb 3-7: Product: HP HD Webcam [ 4.295310] usb 3-7: Manufacturer: Generic [ 4.295311] usb 3-7: SerialNumber: 200901010001 [ 4.424009] usb 3-12: new full-speed USB device number 5 using xhci_hcd [ 4.508103] clocksource: Switched to clocksource tsc [ 4.524493] psmouse serio4: synaptics: queried max coordinates: x [..5742], y [..5004] [ 4.561621] psmouse serio4: synaptics: queried min coordinates: x [1198..], y [972..] [ 4.573038] usb 3-12: New USB device found, idVendor=8087, idProduct=07dc [ 4.573040] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.576619] PKCS#7 signature not signed with a trusted key [ 4.576801] PKCS#7 signature not signed with a trusted key [ 4.577193] hidraw: raw HID events driver (C) Jiri Kosina [ 4.577957] PKCS#7 signature not signed with a trusted key [ 4.577957] PKCS#7 signature not signed with a trusted key [ 4.580778] usbcore: registered new interface driver usbhid [ 4.580778] usbhid: USB HID core driver [ 4.581234] PKCS#7 signature not signed with a trusted key [ 4.581234] PKCS#7 signature not signed with a trusted key [ 4.581434] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C534.0001/input/input13 [ 4.631099] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400/0x0, board id: 2653, fw id: 1481159 [ 4.640257] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0 [ 4.640519] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/input/input14 [ 4.676732] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 4.700334] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1 [ 4.996603] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.586783] random: crng init done [ 6.586785] random: 7 urandom warning(s) missed due to ratelimiting [ 7.018796] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.176426] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.196111] systemd[1]: Detected architecture x86-64. [ 7.226345] systemd[1]: Set hostname to . [ 8.160438] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0). [ 8.160440] atkbd serio0: Use 'setkeycodes e027 ' to make it known. [ 10.210371] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.210412] systemd[1]: Reached target User and Group Name Lookups. [ 10.211135] systemd[1]: Created slice User and Session Slice. [ 10.211179] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.211186] systemd[1]: Reached target Remote File Systems. [ 10.211393] systemd[1]: Created slice System Slice. [ 10.211476] systemd[1]: Listening on Journal Socket. [ 11.203739] lp: driver loaded but no devices found [ 11.318120] ppdev: user-space parallel port driver [ 11.836117] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.095892] systemd-journald[273]: Received request to flush runtime journal from PID 1 [ 16.916329] EDAC ie31200: No ECC support [ 17.222154] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.336130] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247) [ 17.336136] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.336138] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20170831/utaddress-247) [ 17.336142] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.336142] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170831/utaddress-247) [ 17.336145] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20170831/utaddress-247) [ 17.336148] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.336148] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170831/utaddress-247) [ 17.336151] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20170831/utaddress-247) [ 17.336154] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20170831/utaddress-247) [ 17.336156] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20170831/utaddress-247) [ 17.336159] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.336160] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 17.986099] input: HP Wireless hotkeys as /devices/virtual/input/input15 [ 17.987449] hp_accel: laptop model unknown, using default axes configuration [ 18.119965] lis3lv02d: 8 bits 3DC sensor found [ 18.264407] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 18.266649] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 18.836296] Intel(R) Wireless WiFi driver for Linux [ 18.836297] Copyright(c) 2003- 2015 Intel Corporation [ 19.142456] iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm [ 19.520057] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input16 [ 19.711819] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144 [ 19.729984] iwlwifi 0000:03:00.0: base HW address: 80:86:f2:c0:db:86 [ 20.204793] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 20.568149] Bluetooth: Core ver 2.22 [ 20.568164] NET: Registered protocol family 31 [ 20.568164] Bluetooth: HCI device and connection manager initialized [ 20.568167] Bluetooth: HCI socket layer initialized [ 20.568168] Bluetooth: L2CAP socket layer initialized [ 20.568172] Bluetooth: SCO socket layer initialized [ 20.940492] hp_wmi: query 0xd returned error 0x5 [ 20.940537] input: HP WMI hotkeys as /devices/virtual/input/input17 [ 21.173227] usbcore: registered new interface driver btusb [ 21.185949] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 21.572720] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 21.695951] Bluetooth: hci0: Intel firmware patch completed and activated [ 21.710839] media: Linux media interface: v0.10 [ 21.719247] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 21.719248] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 21.719249] RAPL PMU: hw unit of domain package 2^-14 Joules [ 21.719250] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 21.719251] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 21.771766] Linux video capture interface: v2.00 [ 21.997079] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3c8) [ 21.998189] uvcvideo 3-7:1.0: Entity type for entity Extension 5 was not initialized! [ 21.998190] uvcvideo 3-7:1.0: Entity type for entity Extension 2 was not initialized! [ 21.998191] uvcvideo 3-7:1.0: Entity type for entity Processing 3 was not initialized! [ 21.998192] uvcvideo 3-7:1.0: Entity type for entity Camera 1 was not initialized! [ 21.998245] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input18 [ 21.998295] usbcore: registered new interface driver uvcvideo [ 21.998296] USB Video Class driver (1.1.1) [ 22.135362] AVX2 version of gcm_enc/dec engaged. [ 22.135364] AES CTR mode by8 optimization enabled [ 22.140599] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 22.663691] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 22.663693] snd_hda_codec_idt hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 22.663694] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 22.663695] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0 [ 22.663696] snd_hda_codec_idt hdaudioC1D0: inputs: [ 22.663697] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11 [ 22.663699] snd_hda_codec_idt hdaudioC1D0: Mic=0xc [ 22.718086] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 22.718146] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 22.745844] iwlwifi 0000:03:00.0 wlo1: renamed from wlan0 [ 22.827159] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 22.827220] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22 [ 22.827276] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23 [ 22.827636] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24 [ 22.827699] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25 [ 23.668558] intel_rapl: Found RAPL domain package [ 23.668559] intel_rapl: Found RAPL domain core [ 23.668560] intel_rapl: Found RAPL domain uncore [ 23.668561] intel_rapl: Found RAPL domain dram [ 29.235819] Adding 8265724k swap on /dev/sda5. Priority:-2 extents:1 across:8265724k FS [ 33.265740] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 33.265741] Bluetooth: BNEP filters: protocol multicast [ 33.265743] Bluetooth: BNEP socket layer initialized [ 36.218314] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 36.446129] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 36.697363] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 37.005121] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 44.180038] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 47.350334] wlo1: authenticate with 00:fc:ba:32:85:cf [ 47.353807] wlo1: send auth to 00:fc:ba:32:85:cf (try 1/3) [ 47.354951] wlo1: authenticated [ 47.356018] wlo1: associate with 00:fc:ba:32:85:cf (try 1/3) [ 47.359388] wlo1: RX AssocResp from 00:fc:ba:32:85:cf (capab=0x111 status=0 aid=4) [ 47.362046] wlo1: associated [ 47.375342] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 47.437793] wlo1: Limiting TX power to 21 (21 - 0) dBm as advertised by 00:fc:ba:32:85:cf [ 61.512374] Bluetooth: RFCOMM TTY layer initialized [ 61.512377] Bluetooth: RFCOMM socket layer initialized [ 61.512381] Bluetooth: RFCOMM ver 1.11 [ 186.513052] wlo1: deauthenticating from 00:fc:ba:32:85:cf by local choice (Reason: 3=DEAUTH_LEAVING) [ 190.353680] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 190.419298] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 193.600880] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 196.764736] wlo1: authenticate with 00:fc:ba:32:85:cf [ 196.767662] wlo1: send auth to 00:fc:ba:32:85:cf (try 1/3) [ 196.872094] wlo1: send auth to 00:fc:ba:32:85:cf (try 2/3) [ 196.872905] wlo1: authenticated [ 196.876144] wlo1: associate with 00:fc:ba:32:85:cf (try 1/3) [ 196.879185] wlo1: RX AssocResp from 00:fc:ba:32:85:cf (capab=0x111 status=0 aid=4) [ 196.881161] wlo1: associated [ 196.887324] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 196.941742] wlo1: Limiting TX power to 21 (21 - 0) dBm as advertised by 00:fc:ba:32:85:cf [ 1004.324767] usb 3-3: USB disconnect, device number 2 [ 1005.761375] atkbd serio0: Unknown key pressed (translated set 2, code 0xa6 on isa0060/serio0). [ 1005.761377] atkbd serio0: Use 'setkeycodes e026 ' to make it known. [ 1009.685548] atkbd serio0: Unknown key pressed (translated set 2, code 0xa5 on isa0060/serio0). [ 1009.685550] atkbd serio0: Use 'setkeycodes e025 ' to make it known. [ 1009.987435] atkbd serio0: Unknown key pressed (translated set 2, code 0xa6 on isa0060/serio0). [ 1009.987438] atkbd serio0: Use 'setkeycodes e026 ' to make it known. [ 1036.561208] wlo1: disconnect from AP 00:fc:ba:32:85:cf for new auth to 70:df:2f:03:6e:cf [ 1036.573179] wlo1: authenticate with 70:df:2f:03:6e:cf [ 1036.576302] wlo1: send auth to 70:df:2f:03:6e:cf (try 1/3) [ 1036.577533] wlo1: authenticated [ 1036.579361] wlo1: associate with 70:df:2f:03:6e:cf (try 1/3) [ 1036.582497] wlo1: RX ReassocResp from 70:df:2f:03:6e:cf (capab=0x111 status=0 aid=82) [ 1036.583594] wlo1: associated [ 1036.586245] wlo1: Limiting TX power to 21 (21 - 0) dBm as advertised by 70:df:2f:03:6e:cf [ 1041.685380] atkbd serio0: Unknown key pressed (translated set 2, code 0xa6 on isa0060/serio0). [ 1041.685383] atkbd serio0: Use 'setkeycodes e026 ' to make it known. [ 1042.289275] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 1042.289277] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [ 1060.104090] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0). [ 1060.104099] atkbd serio0: Use 'setkeycodes e027 ' to make it known. [ 1207.966150] atkbd serio0: Unknown key pressed (translated set 2, code 0xa6 on isa0060/serio0). [ 1207.966154] atkbd serio0: Use 'setkeycodes e026 ' to make it known. [ 3548.636355] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0). [ 3548.636365] atkbd serio0: Use 'setkeycodes e027 ' to make it known. [ 3549.530948] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 3549.530955] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [ 3553.706129] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 3553.706137] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [ 3554.302514] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 3554.302520] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [ 3554.600800] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0). [ 3554.600807] atkbd serio0: Use 'setkeycodes e027 ' to make it known. [ 3555.197254] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0). [ 3555.197263] atkbd serio0: Use 'setkeycodes e027 ' to make it known. [ 3555.495490] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 3555.495496] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [ 3556.688418] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 3556.688426] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [ 3557.881205] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 3557.881213] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [ 3560.565113] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 3560.565117] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [ 3561.161501] atkbd serio0: Unknown key pressed (translated set 2, code 0xa5 on isa0060/serio0). [ 3561.161504] atkbd serio0: Use 'setkeycodes e025 ' to make it known. [ 3563.844860] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 3563.844867] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [ 3564.143376] atkbd serio0: Unknown key pressed (translated set 2, code 0xa5 on isa0060/serio0). [ 3564.143384] atkbd serio0: Use 'setkeycodes e025 ' to make it known. [ 3581.576193] wlo1: disconnect from AP 70:df:2f:03:6e:cf for new auth to 00:fc:ba:32:85:cf [ 3581.580715] wlo1: authenticate with 00:fc:ba:32:85:cf [ 3581.583522] wlo1: send auth to 00:fc:ba:32:85:cf (try 1/3) [ 3581.584701] wlo1: authenticated [ 3581.585876] wlo1: associate with 00:fc:ba:32:85:cf (try 1/3) [ 3581.589134] wlo1: RX ReassocResp from 00:fc:ba:32:85:cf (capab=0x111 status=0 aid=18) [ 3581.590146] wlo1: associated [ 3581.666417] wlo1: Limiting TX power to 21 (21 - 0) dBm as advertised by 00:fc:ba:32:85:cf [ 3582.029522] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0). [ 3582.029531] atkbd serio0: Use 'setkeycodes e028 ' to make it known. [ 3584.413954] atkbd serio0: Unknown key pressed (translated set 2, code 0xa6 on isa0060/serio0). [ 3584.413962] atkbd serio0: Use 'setkeycodes e026 ' to make it known. [ 3589.113879] usb 3-3: new full-speed USB device number 6 using xhci_hcd [ 3589.264463] usb 3-3: New USB device found, idVendor=046d, idProduct=c534 [ 3589.264470] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3589.264474] usb 3-3: Product: USB Receiver [ 3589.264478] usb 3-3: Manufacturer: Logitech [ 3589.267434] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C534.0003/input/input26 [ 3589.326552] hid-generic 0003:046D:C534.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0 [ 3589.329579] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0004/input/input27 [ 3589.386150] hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1 [ 5585.533320] perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 6186.281853] wlo1: deauthenticating from 00:fc:ba:32:85:cf by local choice (Reason: 3=DEAUTH_LEAVING) [ 6186.293171] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 6186.652804] PM: suspend entry (deep) [ 6186.652806] PM: Syncing filesystems ... done. [ 6189.280316] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 6189.284033] OOM killer disabled. [ 6189.284035] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6189.285704] Suspending console(s) (use no_console_suspend to debug) [ 6189.302756] sd 4:0:0:0: [sda] Synchronizing SCSI cache [ 6189.490016] sd 4:0:0:0: [sda] Stopping disk [ 6190.087243] ACPI: EC: interrupt blocked [ 6190.107416] ACPI: Preparing to enter system sleep state S3 [ 6190.109579] ACPI: EC: event blocked [ 6190.109580] ACPI: EC: EC stopped [ 6190.109581] PM: Saving platform NVS memory [ 6190.109599] Disabling non-boot CPUs ... [ 6190.125009] smpboot: CPU 1 is now offline [ 6190.144379] smpboot: CPU 2 is now offline [ 6190.172299] smpboot: CPU 3 is now offline [ 6190.176208] ACPI: Low-level resume complete [ 6190.176259] ACPI: EC: EC started [ 6190.176260] PM: Restoring platform NVS memory [ 6190.179018] Enabling non-boot CPUs ... [ 6190.179059] x86: Booting SMP configuration: [ 6190.179060] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6190.179529] cache: parent cpu1 should not be sleeping [ 6190.179709] CPU1 is up [ 6190.179742] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 6190.181606] cache: parent cpu2 should not be sleeping [ 6190.181810] CPU2 is up [ 6190.181838] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 6190.182256] cache: parent cpu3 should not be sleeping [ 6190.182730] CPU3 is up [ 6190.191905] ACPI: Waking up from system sleep state S3 [ 6190.331020] ACPI: EC: interrupt unblocked [ 6190.369519] ACPI: EC: event unblocked [ 6190.373732] sd 4:0:0:0: [sda] Starting disk [ 6190.668960] usb 3-12: reset full-speed USB device number 5 using xhci_hcd [ 6190.695805] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6190.697997] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 6190.700382] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 6190.700393] ata6.00: configured for UDMA/100 [ 6190.944846] usb 3-7: reset high-speed USB device number 4 using xhci_hcd [ 6191.761435] ACPI: button: The lid device is not compliant to SW_LID. [ 6191.815668] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value [ 6191.815673] tpm tpm0: TPM is disabled/deactivated (0x7) [ 6191.829062] acpi LNXPOWER:02: Turning OFF [ 6191.829136] acpi LNXPOWER:01: Turning OFF [ 6191.829164] OOM killer enabled. [ 6191.829165] Restarting tasks ... [ 6191.829235] acpi PNP0501:00: Still not present [ 6191.830431] done. [ 6191.841450] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 6191.841455] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 6191.933418] PM: suspend exit [ 6191.974445] Bluetooth: hci0: Intel firmware patch completed and activated [ 6192.200665] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6192.203426] ata5.00: configured for UDMA/100 [ 6192.331896] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 6192.571297] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 6192.589964] psmouse serio4: synaptics: queried max coordinates: x [..5742], y [..5004] [ 6192.627709] psmouse serio4: synaptics: queried min coordinates: x [1198..], y [972..] [ 6192.632623] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 6195.784332] wlo1: authenticate with 00:fc:ba:32:85:cf [ 6195.787247] wlo1: send auth to 00:fc:ba:32:85:cf (try 1/3) [ 6195.888815] wlo1: send auth to 00:fc:ba:32:85:cf (try 2/3) [ 6195.889492] wlo1: authenticated [ 6195.892813] wlo1: associate with 00:fc:ba:32:85:cf (try 1/3) [ 6195.895794] wlo1: RX AssocResp from 00:fc:ba:32:85:cf (capab=0x111 status=0 aid=18) [ 6195.897928] wlo1: associated [ 6195.903787] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 6195.929379] wlo1: Limiting TX power to 21 (21 - 0) dBm as advertised by 00:fc:ba:32:85:cf [ 8939.912574] perf: interrupt took too long (3141 > 3132), lowering kernel.perf_event_max_sample_rate to 63500 [14118.659662] audit: type=1400 audit(1538381461.174:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=23636 comm="apparmor_parser" [14147.160321] audit: type=1400 audit(1538381489.681:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=25065 comm="apparmor_parser" [14147.160628] audit: type=1400 audit(1538381489.681:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=25065 comm="apparmor_parser" [14147.160919] audit: type=1400 audit(1538381489.681:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=25065 comm="apparmor_parser" [14183.716549] SGI XFS with ACLs, security attributes, realtime, no debug enabled [14183.723223] JFS: nTxBlock = 8192, nTxLock = 65536 [14183.731485] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [14183.744941] QNX4 filesystem 0.2.3 registered. [14183.796321] raid6: sse2x1 gen() 9925 MB/s [14183.844316] raid6: sse2x1 xor() 7265 MB/s [14183.892314] raid6: sse2x2 gen() 12269 MB/s [14183.940309] raid6: sse2x2 xor() 7924 MB/s [14183.988294] raid6: sse2x4 gen() 14414 MB/s [14184.036303] raid6: sse2x4 xor() 9216 MB/s [14184.084299] raid6: avx2x1 gen() 19904 MB/s [14184.132292] raid6: avx2x1 xor() 13754 MB/s [14184.180281] raid6: avx2x2 gen() 23334 MB/s [14184.228285] raid6: avx2x2 xor() 14017 MB/s [14184.276282] raid6: avx2x4 gen() 26745 MB/s [14184.324278] raid6: avx2x4 xor() 16871 MB/s [14184.324279] raid6: using algorithm avx2x4 gen() 26745 MB/s [14184.324280] raid6: .... xor() 16871 MB/s, rmw enabled [14184.324281] raid6: using avx2x2 recovery algorithm [14184.325661] xor: automatically using best checksumming function avx [14184.430749] Btrfs loaded, crc32c=crc32c-intel [14375.402721] audit: type=1400 audit(1538381717.935:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=19814 comm="apparmor_parser" [14375.403587] audit: type=1400 audit(1538381717.935:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=19814 comm="apparmor_parser" [14375.403973] audit: type=1400 audit(1538381717.935:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=19814 comm="apparmor_parser" [14396.552767] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [14396.626125] r8169 0000:02:00.0 enp2s0: link down [14396.626239] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [14398.059669] audit: type=1400 audit(1538381740.592:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=20548 comm="apparmor_parser" [14416.422171] audit: type=1400 audit(1538381758.957:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=21114 comm="apparmor_parser" [14416.422374] audit: type=1400 audit(1538381758.957:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=21114 comm="apparmor_parser" [14421.724957] perf: interrupt took too long (3929 > 3926), lowering kernel.perf_event_max_sample_rate to 50750 [14711.216809] audit: type=1400 audit(1538382053.758:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=24978 comm="apparmor_parser" [14929.848870] audit: type=1400 audit(1538382272.395:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=31718 comm="apparmor_parser" [14929.877879] audit: type=1400 audit(1538382272.427:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=31725 comm="apparmor_parser" [14930.451987] audit: type=1400 audit(1538382272.999:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=31732 comm="apparmor_parser" [14930.452429] audit: type=1400 audit(1538382272.999:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=31732 comm="apparmor_parser" [14930.482820] audit: type=1400 audit(1538382273.031:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=31739 comm="apparmor_parser" [14992.587928] audit: type=1400 audit(1538382335.135:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=32167 comm="apparmor_parser" [14992.588420] audit: type=1400 audit(1538382335.139:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=32167 comm="apparmor_parser" [14992.592354] audit: type=1400 audit(1538382335.139:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=32167 comm="apparmor_parser" [14992.592726] audit: type=1400 audit(1538382335.143:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=32167 comm="apparmor_parser" [14992.593594] audit: type=1400 audit(1538382335.143:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=32167 comm="apparmor_parser" [14992.593923] audit: type=1400 audit(1538382335.143:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=32167 comm="apparmor_parser" [16059.531233] wlo1: deauthenticating from 00:fc:ba:32:85:cf by local choice (Reason: 3=DEAUTH_LEAVING) [16059.543674] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [16059.612252] PM: suspend entry (deep) [16059.612254] PM: Syncing filesystems ... done. [16060.344259] Freezing user space processes ... (elapsed 0.004 seconds) done. [16060.348545] OOM killer disabled. [16060.348546] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [16060.349845] Suspending console(s) (use no_console_suspend to debug) [16060.365717] sd 4:0:0:0: [sda] Synchronizing SCSI cache [16060.540984] sd 4:0:0:0: [sda] Stopping disk [16061.141816] ACPI: EC: interrupt blocked [16061.161975] ACPI: Preparing to enter system sleep state S3 [16061.164117] ACPI: EC: event blocked [16061.164118] ACPI: EC: EC stopped [16061.164119] PM: Saving platform NVS memory [16061.164133] Disabling non-boot CPUs ... [16061.177896] IRQ 34: no longer affine to CPU1 [16061.179408] smpboot: CPU 1 is now offline [16061.206044] IRQ 32: no longer affine to CPU2 [16061.207058] smpboot: CPU 2 is now offline [16061.229979] IRQ 16: no longer affine to CPU3 [16061.231000] smpboot: CPU 3 is now offline [16061.235393] ACPI: Low-level resume complete [16061.235443] ACPI: EC: EC started [16061.235443] PM: Restoring platform NVS memory [16061.238198] Enabling non-boot CPUs ... [16061.238245] x86: Booting SMP configuration: [16061.238246] smpboot: Booting Node 0 Processor 1 APIC 0x1 [16061.238734] cache: parent cpu1 should not be sleeping [16061.238930] CPU1 is up [16061.238980] smpboot: Booting Node 0 Processor 2 APIC 0x2 [16061.240857] cache: parent cpu2 should not be sleeping [16061.241079] CPU2 is up [16061.241113] smpboot: Booting Node 0 Processor 3 APIC 0x3 [16061.241528] cache: parent cpu3 should not be sleeping [16061.242059] CPU3 is up [16061.251219] ACPI: Waking up from system sleep state S3 [16061.389598] ACPI: EC: interrupt unblocked [16061.428080] ACPI: EC: event unblocked [16061.435137] sd 4:0:0:0: [sda] Starting disk [16061.731486] usb 3-12: reset full-speed USB device number 5 using xhci_hcd [16061.758326] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [16061.760488] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [16061.762785] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [16061.762795] ata6.00: configured for UDMA/100 [16062.007332] usb 3-7: reset high-speed USB device number 4 using xhci_hcd [16062.880622] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value [16062.880628] tpm tpm0: TPM is disabled/deactivated (0x7) [16062.894977] acpi LNXPOWER:02: Turning OFF [16062.895140] acpi LNXPOWER:01: Turning OFF [16062.895212] OOM killer enabled. [16062.895213] Restarting tasks ... [16062.895401] acpi PNP0501:00: Still not present [16062.904038] done. [16062.908988] Bluetooth: hci0: read Intel version: 370710018002030d00 [16062.909053] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [16063.031127] PM: suspend exit [16063.079987] Bluetooth: hci0: Intel firmware patch completed and activated [16063.653052] psmouse serio4: synaptics: queried max coordinates: x [..5742], y [..5004] [16063.686881] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [16063.689882] ata5.00: configured for UDMA/100 [16063.694672] psmouse serio4: synaptics: queried min coordinates: x [1198..], y [972..] [16064.237767] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [16064.312942] r8169 0000:02:00.0 enp2s0: link down [16064.313129] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [16064.315646] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [16064.549001] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [16064.607497] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [16067.779208] wlo1: authenticate with 00:fc:ba:32:85:cf [16067.782136] wlo1: send auth to 00:fc:ba:32:85:cf (try 1/3) [16067.886142] wlo1: send auth to 00:fc:ba:32:85:cf (try 2/3) [16067.886906] wlo1: authenticated [16067.890125] wlo1: associate with 00:fc:ba:32:85:cf (try 1/3) [16067.981629] wlo1: RX AssocResp from 00:fc:ba:32:85:cf (capab=0x111 status=0 aid=18) [16067.983500] wlo1: associated [16067.990524] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [16068.015346] wlo1: Limiting TX power to 21 (21 - 0) dBm as advertised by 00:fc:ba:32:85:cf