[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-5-generic (buildd@crested) (gcc version 4.3.1 (Ubuntu 4.3.1-9ubuntu1) ) #1 SMP Fri Aug 15 13:54:22 UTC 2008 (Ubuntu 2.6.26-5.17-generic) [ 0.000000] Command line: root=UUID=a8aa4adb-b3e6-4e1d-b4ad-e6cd704788b2 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786352) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] max_pfn_mapped = 1310720 [ 0.000000] init_memory_mapping [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000FB120, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT BFFB0000, 0038 (r1 A_M_I_ OEMRSDT 1000822 MSFT 97) [ 0.000000] ACPI: FACP BFFB0200, 0084 (r2 A_M_I_ OEMFACP 1000822 MSFT 97) [ 0.000000] ACPI: DSDT BFFB05B0, 69CB (r1 A0789 A0789000 0 INTL 20060113) [ 0.000000] ACPI: FACS BFFBE000, 0040 [ 0.000000] ACPI: APIC BFFB0390, 005C (r1 A_M_I_ OEMAPIC 1000822 MSFT 97) [ 0.000000] ACPI: MCFG BFFB03F0, 003C (r1 A_M_I_ OEMMCFG 1000822 MSFT 97) [ 0.000000] ACPI: OEMB BFFBE040, 0061 (r1 A_M_I_ AMI_OEM 1000822 MSFT 97) [ 0.000000] ACPI: HPET BFFB6F80, 0038 (r1 A_M_I_ OEMHPET 1000822 MSFT 97) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786352) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000e000 - 0000000000012fff] [ 0.000000] bootmap [0000000000013000 - 000000000003afff] pages 28 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-7da81b] TEXT DATA BSS [ 0.000000] early res: 3 [377d7000-37fef10b] RAMDISK [ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-dfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ 0.000000] [ffffe20002e00000-ffffe20004ffffff] PMD -> [ffff81000c000000-ffff81000d1fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1310720 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 786352 [ 0.000000] 0: 1048576 -> 1310720 [ 0.000000] On node 0 totalpages: 1048399 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1605 pages reserved [ 0.000000] DMA zone: 2330 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 765936 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffbe000 [ 0.000000] PM: Registered nosave memory: 00000000bffbe000 - 00000000bfff0000 [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 45360 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026314 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=a8aa4adb-b3e6-4e1d-b4ad-e6cd704788b2 ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] time.c: Detected 2393.995 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x4000000 - 0x8000000 [ 0.004000] Memory: 4047444k/5242880k available (2950k kernel code, 146152k reserved, 1479k data, 408k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.083858] Calibrating delay using timer specific routine.. 4791.75 BogoMIPS (lpj=9583500) [ 0.083992] Security Framework initialized [ 0.084005] SELinux: Disabled at boot. [ 0.084005] AppArmor: AppArmor initialized [ 0.084005] AppArmor: Registered secondary security module capability [ 0.084005] Capability LSM initialized as secondary [ 0.084005] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.084005] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.085208] Mount-cache hash table entries: 256 [ 0.085428] Initializing cgroup subsys ns [ 0.085489] Initializing cgroup subsys cpuacct [ 0.085546] Initializing cgroup subsys memory [ 0.085616] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.085715] CPU: L2 cache: 3072K [ 0.085772] CPU 0/0 -> Node 0 [ 0.085828] CPU: Physical Processor ID: 0 [ 0.085885] CPU: Processor Core ID: 0 [ 0.085946] CPU0: Thermal monitoring enabled (TM2) [ 0.086003] using mwait in idle threads. [ 0.087040] Early unpacking initramfs... done [ 0.407501] ACPI: Core revision 20080321 [ 0.409759] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 0.465014] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.465159] Using local APIC timer interrupts. [ 0.472029] APIC timer calibration result 12468707 [ 0.472029] Detected 12.468 MHz APIC timer. [ 0.472029] Booting processor 1/1 ip 6000 [ 0.480030] Initializing CPU#1 [ 0.480030] Calibrating delay using timer specific routine.. 4787.95 BogoMIPS (lpj=9575913) [ 0.480030] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.480030] CPU: L2 cache: 3072K [ 0.480030] CPU 1/1 -> Node 0 [ 0.480030] CPU: Physical Processor ID: 0 [ 0.480030] CPU: Processor Core ID: 1 [ 0.480030] CPU1: Thermal monitoring enabled (TM2) [ 0.560031] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.560031] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.564031] Brought up 2 CPUs [ 0.564031] Total of 2 processors activated (9579.70 BogoMIPS). [ 0.564031] CPU0 attaching sched-domain: [ 0.564031] domain 0: span 0-1 [ 0.564031] groups: 0 1 [ 0.564031] domain 1: span 0-1 [ 0.564031] groups: 0-1 [ 0.564031] CPU1 attaching sched-domain: [ 0.564031] domain 0: span 0-1 [ 0.564031] groups: 1 0 [ 0.564031] domain 1: span 0-1 [ 0.564031] groups: 0-1 [ 0.564032] net_namespace: 1224 bytes [ 0.564032] Booting paravirtualized kernel on bare hardware [ 0.564032] NET: Registered protocol family 16 [ 0.564032] ACPI: bus type pci registered [ 0.564032] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.564032] PCI: Not using MMCONFIG. [ 0.564032] PCI: Using configuration type 1 for base access [ 0.564032] ACPI: EC: Look up EC in DSDT [ 0.674293] ACPI: Interpreter enabled [ 0.674351] ACPI: (supports S0 S1 S3 S4 S5) [ 0.674625] ACPI: Using IOAPIC for interrupt routing [ 0.674731] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.676548] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.688903] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.692903] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.705001] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.705001] ACPI: EC: driver started in interrupt mode [ 0.705001] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.705292] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.705365] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.706484] PCI: Transparent bridge - 0000:00:1e.0 [ 0.706573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.706745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.706823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.706918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.707011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.707101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.707194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.758628] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.759295] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.759295] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.759582] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.760249] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.761009] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.761676] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.762627] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.762628] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.762628] pnp: PnP ACPI init [ 0.762633] ACPI: bus type pnp registered [ 0.770173] pnp: PnP ACPI: found 13 devices [ 0.770173] ACPI: ACPI bus type pnp unregistered [ 0.770174] PCI: Using ACPI for IRQ routing [ 0.792613] NET: Registered protocol family 8 [ 0.792670] NET: Registered protocol family 20 [ 0.794173] NetLabel: Initializing [ 0.794173] NetLabel: domain hash size = 128 [ 0.794173] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.794173] NetLabel: unlabeled traffic allowed by default [ 0.794173] PCI-GART: No AMD northbridge found. [ 0.794173] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.794173] hpet0: 3 64-bit timers, 14318180 Hz [ 0.794173] AppArmor: AppArmor Filesystem Enabled [ 0.794173] ACPI: RTC can wake from S4 [ 0.796257] Switched to high resolution mode on CPU 0 [ 0.799499] Switched to high resolution mode on CPU 1 [ 0.808212] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.808278] system 00:08: ioport range 0x25c-0x25f has been reserved [ 0.808338] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.808398] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.808457] system 00:08: ioport range 0x500-0x53f has been reserved [ 0.808518] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.808579] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.808640] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.808700] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.808761] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.808835] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.808896] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.811482] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.811495] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.811495] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.811495] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.811495] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved [ 0.811495] system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.811495] PCI: Bridge: 0000:00:01.0 [ 0.811495] IO window: b000-bfff [ 0.811495] MEM window: 0xf4000000-0xf7cfffff [ 0.811495] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff [ 0.811495] PCI: Bridge: 0000:00:1c.0 [ 0.811495] IO window: e000-efff [ 0.811495] MEM window: 0xf8000000-0xfbefffff [ 0.811495] PREFETCH window: 0x00000000dc000000-0x00000000dfffffff [ 0.811495] PCI: Bridge: 0000:00:1c.2 [ 0.811495] IO window: disabled. [ 0.811495] MEM window: 0xf7f00000-0xf7ffffff [ 0.811495] PREFETCH window: disabled. [ 0.811495] PCI: Bridge: 0000:00:1c.3 [ 0.811495] IO window: d000-dfff [ 0.811495] MEM window: 0xf7e00000-0xf7efffff [ 0.811495] PREFETCH window: disabled. [ 0.811495] PCI: Bridge: 0000:00:1c.4 [ 0.811495] IO window: c000-cfff [ 0.811495] MEM window: 0xf7d00000-0xf7dfffff [ 0.811495] PREFETCH window: 0x00000000d0000000-0x00000000d00fffff [ 0.811495] PCI: Bridge: 0000:00:1e.0 [ 0.811495] IO window: disabled. [ 0.811556] MEM window: 0xfbf00000-0xfbffffff [ 0.811615] PREFETCH window: disabled. [ 0.811685] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.811799] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.811814] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.811927] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.811942] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.812056] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.812071] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 0.812184] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.812198] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.812313] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.812321] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.812330] NET: Registered protocol family 2 [ 0.853540] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.857387] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.861656] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.862255] TCP: Hash tables configured (established 524288 bind 65536) [ 0.862316] TCP reno registered [ 0.872242] NET: Registered protocol family 1 [ 0.872386] checking if image is initramfs... it is [ 1.497169] Freeing initrd memory: 8288k freed [ 1.504159] audit: initializing netlink socket (disabled) [ 1.504159] type=2000 audit(1219928862.492:1): initialized [ 1.508159] Total HugeTLB memory allocated, 0 [ 1.508168] VFS: Disk quotas dquot_6.5.1 [ 1.508168] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.508168] msgmni has been set to 7921 [ 1.508168] io scheduler noop registered [ 1.508168] io scheduler anticipatory registered [ 1.508168] io scheduler deadline registered [ 1.508168] io scheduler cfq registered (default) [ 2.584318] pci 0000:01:00.0: Boot video device [ 2.588106] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 2.588106] assign_interrupt_mode Found MSI capability [ 2.588106] Allocate Port Service[0000:00:01.0:pcie00] [ 2.588106] Allocate Port Service[0000:00:01.0:pcie02] [ 2.588106] Allocate Port Service[0000:00:01.0:pcie03] [ 2.588106] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 2.588106] assign_interrupt_mode Found MSI capability [ 2.588106] Allocate Port Service[0000:00:1c.0:pcie00] [ 2.588106] Allocate Port Service[0000:00:1c.0:pcie02] [ 2.588106] Allocate Port Service[0000:00:1c.0:pcie03] [ 2.588106] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 2.588106] assign_interrupt_mode Found MSI capability [ 2.588106] Allocate Port Service[0000:00:1c.2:pcie00] [ 2.588106] Allocate Port Service[0000:00:1c.2:pcie02] [ 2.588106] Allocate Port Service[0000:00:1c.2:pcie03] [ 2.588106] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 2.588106] assign_interrupt_mode Found MSI capability [ 2.588106] Allocate Port Service[0000:00:1c.3:pcie00] [ 2.588106] Allocate Port Service[0000:00:1c.3:pcie02] [ 2.588106] Allocate Port Service[0000:00:1c.3:pcie03] [ 2.589182] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 2.589182] assign_interrupt_mode Found MSI capability [ 2.589182] Allocate Port Service[0000:00:1c.4:pcie00] [ 2.589182] Allocate Port Service[0000:00:1c.4:pcie02] [ 2.589182] Allocate Port Service[0000:00:1c.4:pcie03] [ 2.605182] hpet_resources: 0xfed00000 is busy [ 2.605182] Linux agpgart interface v0.103 [ 2.605182] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.605182] brd: module loaded [ 2.605232] input: Macintosh mouse button emulation as /class/input/input0 [ 2.605380] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.609182] i8042.c: Detected active multiplexing controller, rev 1.1. [ 2.610234] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.610234] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.610234] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.610234] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.610234] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.639357] mice: PS/2 mouse device common for all mice [ 2.639357] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.639357] rtc0: alarms up to one month, y3k [ 2.639357] cpuidle: using governor ladder [ 2.639357] cpuidle: using governor menu [ 2.639357] aufs 20080609 [ 2.639357] registered taskstats version 1 [ 2.639357] rtc_cmos 00:03: setting system clock to 2008-08-28 13:07:43 UTC (1219928863) [ 2.639357] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.639357] EDD information not available. [ 2.639357] Freeing unused kernel memory: 408k freed [ 2.671306] input: AT Translated Set 2 keyboard as /class/input/input1 [ 2.719605] fuse init (API version 7.9) [ 2.739767] uvesafb: failed to execute /sbin/v86d [ 2.739767] uvesafb: make sure that the v86d helper is installed and executable [ 2.739767] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 2.739767] uvesafb: vbe_init() failed with -22 [ 2.739767] uvesafb: probe of uvesafb.0 failed with error -22 [ 2.752035] ACPI: SSDT BFFBE0B0, 0320 (r1 AMI CPU1PM 1 INTL 20060113) [ 2.752035] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 2.752035] ACPI: ACPI0007:00 is registered as cooling_device0 [ 2.752035] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.752035] ACPI: SSDT BFFBE3D0, 00E3 (r1 AMI CPU2PM 1 INTL 20060113) [ 2.753542] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 2.753542] ACPI: ACPI0007:01 is registered as cooling_device1 [ 2.753542] ACPI: Processor [CPU2] (supports 8 throttling statesMarking TSC unstable due to TSC halts in idle [ 2.753706] ) [ 2.823664] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 2.852542] ACPI: Thermal Zone [TZ00] (42 C) [ 3.322980] usbcore: registered new interface driver usbfs [ 3.322980] usbcore: registered new interface driver hub [ 3.322980] usbcore: registered new device driver usb [ 3.327686] USB Universal Host Controller Interface driver v3.0 [ 3.327686] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 3.327686] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 3.327686] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.327686] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.327686] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a880 [ 3.327686] usb usb1: configuration #1 chosen from 1 choice [ 3.327686] hub 1-0:1.0: USB hub found [ 3.327686] hub 1-0:1.0: 2 ports detected [ 3.387206] No dock devices found. [ 3.390982] SCSI subsystem initialized [ 3.396627] libata version 3.00 loaded. [ 3.438244] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 3.438244] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 3.438244] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.438244] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.438244] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ac00 [ 3.438244] usb usb2: configuration #1 chosen from 1 choice [ 3.438244] hub 2-0:1.0: USB hub found [ 3.438244] hub 2-0:1.0: 2 ports detected [ 3.540044] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.540061] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 3.540064] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.540144] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 3.544124] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.544185] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 3.544195] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3fffc00 [ 3.560004] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.560152] usb usb3: configuration #1 chosen from 1 choice [ 3.560229] hub 3-0:1.0: USB hub found [ 3.560289] hub 3-0:1.0: 4 ports detected [ 3.663732] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 3.663732] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.663732] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.663732] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 3.663732] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a400 [ 3.663732] usb usb4: configuration #1 chosen from 1 choice [ 3.663732] hub 4-0:1.0: USB hub found [ 3.663732] hub 4-0:1.0: 2 ports detected [ 3.767328] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 3.767328] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.767328] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.767328] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 3.767328] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a480 [ 3.767328] usb usb5: configuration #1 chosen from 1 choice [ 3.767328] hub 5-0:1.0: USB hub found [ 3.767328] hub 5-0:1.0: 2 ports detected [ 3.871335] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.871335] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.871335] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.871335] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 3.871335] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a800 [ 3.871335] usb usb6: configuration #1 chosen from 1 choice [ 3.871335] hub 6-0:1.0: USB hub found [ 3.871335] hub 6-0:1.0: 2 ports detected [ 3.976075] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 3.976152] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.976155] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.976233] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 3.980206] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.980267] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.980271] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3fff800 [ 4.070782] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.070924] usb usb7: configuration #1 chosen from 1 choice [ 4.071002] hub 7-0:1.0: USB hub found [ 4.071063] hub 7-0:1.0: 6 ports detected [ 4.177586] ahci 0000:00:1f.2: version 3.0 [ 4.177586] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18 [ 4.741202] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 4.917825] usb 1-1: configuration #1 chosen from 1 choice [ 5.180671] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 5.180758] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 5.180771] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.180776] scsi0 : ahci [ 5.180776] scsi1 : ahci [ 5.180776] scsi2 : ahci [ 5.180776] ata1: SATA max UDMA/133 abar m2048@0xf3fff000 port 0xf3fff100 irq 2298 [ 5.180776] ata2: SATA max UDMA/133 abar m2048@0xf3fff000 port 0xf3fff180 irq 2298 [ 5.180776] ata3: SATA max UDMA/133 abar m2048@0xf3fff000 port 0xf3fff200 irq 2298 [ 5.401051] usb 7-6: new high speed USB device using ehci_hcd and address 3 [ 5.501532] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.551601] usb 7-6: configuration #1 chosen from 1 choice [ 5.554894] ata1.00: ATA-8: WDC WD3200BEVT-00ZCT0, 11.01A11, max UDMA/133 [ 5.554894] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 5.556456] ata1.00: configured for UDMA/133 [ 5.789247] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 5.872237] ata2: SATA link down (SStatus 0 SControl 300) [ 5.968985] usb 2-2: configuration #1 chosen from 1 choice [ 6.197315] ata3: SATA link down (SStatus 0 SControl 300) [ 6.197294] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 11.0 PQ: 0 ANSI: 5 [ 6.197294] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 6.235442] usb 6-1: new full speed USB device using uhci_hcd and address 2 [ 6.479957] usb 6-1: configuration #1 chosen from 1 choice [ 6.483791] usbcore: registered new interface driver hiddev [ 6.511095] input: Areson Inc. 2.4G Receiver as /class/input/input2 [ 6.530393] input,hidraw0: USB HID v1.11 Mouse [Areson Inc. 2.4G Receiver] on usb-0000:00:1a.1-2 [ 6.544492] hiddev96hidraw1: USB HID v1.11 Device [Areson Inc. 2.4G Receiver] on usb-0000:00:1a.1-2 [ 6.544492] usbcore: registered new interface driver usbhid [ 6.544492] usbhid: v2.6:USB HID core driver [ 7.205346] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 7.205432] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 7.205497] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 7.209059] scsi3 : ahci [ 7.209059] ata4: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 19 [ 7.526023] ata4: SATA link down (SStatus 0 SControl 300) [ 7.529753] ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.530062] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.530062] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 7.530062] sky2 0000:02:00.0: v1.21 addr 0xf7dfc000 irq 16 Yukon-EC Ultra (0xb4) rev 2 [ 7.530062] sky2 eth0: addr 00:1d:60:7f:e0:ae [ 7.584121] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fbffe800-fbffefff] Max Packet=[2048] IR/IT contexts=[4/4] [ 7.592634] Driver 'sd' needs updating - please use bus_type methods [ 7.592634] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 7.592634] sd 0:0:0:0: [sda] Write Protect is off [ 7.592634] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.592634] ACPI: PCI Interrupt 0000:00:1f.1[A] -> <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.592634] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 7.592634] sd 0:0:0:0: [sda] Write Protect is off [ 7.592634] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.592634] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.592634] sda:GSI 19 (level, low) -> IRQ 19 [ 7.592634] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 7.592634] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 7.592761] ata_piix 0000:00:1f.1: version 2.12 [ 7.592768] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 7.592910] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 7.592965] scsi4 : ata_piix [ 7.593074] scsi5 : ata_piix [ 7.596591] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 7.596591] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 7.645688] sda1 sda2 sda3 < sda5 > [ 7.667664] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.672591] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.782982] ata5.00: ATAPI: Slimtype DVDRW SSM-8515S, GS09, max UDMA/33 [ 7.826544] ata5.00: configured for UDMA/33 [ 7.826544] ata6: port disabled. ignoring. [ 7.828080] scsi 4:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GS09 PQ: 0 ANSI: 5 [ 7.828080] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 7.834545] Driver 'sr' needs updating - please use bus_type methods [ 7.845125] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.845204] Uniform CD-ROM driver Revision: 3.20 [ 7.845214] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 7.909236] PM: Starting manual resume from disk [ 7.909236] PM: Resume from partition 8:2 [ 7.909236] PM: Checking hibernation image. [ 7.909586] PM: Resume from disk failed. [ 7.955914] kjournald starting. Commit interval 5 seconds [ 7.955914] EXT3-fs: mounted filesystem with ordered data mode. [ 8.869740] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003a853e6] [ 104.088084] udevd version 124 started [ 104.789115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 104.801751] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 104.924646] input: Power Button (FF) as /class/input/input3 [ 104.990309] ACPI: Power Button (FF) [PWRF] [ 104.990467] input: Lid Switch as /class/input/input4 [ 105.021948] ACPI: Lid Switch [LID] [ 105.021948] input: Sleep Button (CM) as /class/input/input5 [ 105.069120] ACPI: Sleep Button (CM) [SLPB] [ 105.069236] input: Power Button (CM) as /class/input/input6 [ 105.133878] ACPI: Power Button (CM) [PWRB] [ 105.133967] asus-laptop: Asus Laptop Support version 0.42 [ 105.134949] asus-laptop: Error calling BSTS [ 105.134949] asus-laptop: S37S model detected [ 105.146947] Registered led device: asus::mail [ 105.195931] ACPI: Battery Slot [BAT0] (battery present) [ 105.195931] ACPI: AC Adapter [AC0] (on-line) [ 105.195931] input: Video Bus as /class/input/input7 [ 105.244976] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 105.881931] nvidia: module license 'NVIDIA' taints kernel. [ 106.138875] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 106.139003] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 106.139114] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.12 Thu Jul 17 18:10:24 PDT 2008 [ 106.183002] iTCO_vendor_support: vendor-support=0 [ 106.200414] ricoh-mmc: Ricoh MMC Controller disabling driver [ 106.200480] ricoh-mmc: Copyright(c) Philip Langdale [ 106.200567] ricoh-mmc: Ricoh MMC controller found at 0000:07:01.2 [1180:0843] (rev 12) [ 106.200651] ricoh-mmc: Controller is now disabled. [ 106.294423] sdhci: Secure Digital Host Controller Interface driver [ 106.294423] sdhci: Copyright(c) Pierre Ossman [ 106.294423] sdhci: SDHCI controller found at 0000:07:01.1 [1180:0822] (rev 22) [ 106.294423] ACPI: PCI Interrupt 0000:07:01.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 106.294423] mmc0: Will use DMA mode even though HW doesn't fully claim to support it. [ 106.299355] mmc0: SDHCI at 0xfbfff400 irq 17 DMA [ 106.377409] Bluetooth: Core ver 2.11 [ 106.381399] NET: Registered protocol family 31 [ 106.381399] Bluetooth: HCI device and connection manager initialized [ 106.381399] Bluetooth: HCI socket layer initialized [ 106.392764] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 106.394045] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 106.394045] iTCO_wdt: No card detected [ 106.493459] Bluetooth: HCI USB driver ver 2.9 [ 106.497246] usbcore: registered new interface driver hci_usb [ 106.530280] Linux video capture interface: v2.00 [ 106.711519] gl860: Genesys USB2.0 webcam driver startup [ 106.711519] gl860: Release: 0103 [ 106.711519] gl860: Number of interfaces : 1 [ 106.711519] gl860: Forcage du pilote [ 106.711519] gl860: Version Hulkie (c) [ 106.711519] gl860: Genesys USB2.0 - GL860 based webcam found. [ 106.711519] gl860: Genesys USB2.0 2.0M WebCam - Product ID 0x0503. [ 106.830544] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26ks [ 106.830544] iwl4965: Copyright(c) 2003-2008 Intel Corporation [ 106.830544] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 106.830544] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 106.830544] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 106.889299] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels [ 106.889299] phy0: Selected rate control algorithm 'iwl-4965-rs' [ 107.014429] ACPI: PCI interrupt for device 0000:04:00.0 disabled [ 107.014429] input: 4965AGN as /class/input/input8 [ 107.070586] udev: renamed network interface wlan0 to wlan2 [ 107.145651] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0 [ 107.184599] input: SynPS/2 Synaptics TouchPad as /class/input/input9 [ 107.201759] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 107.201896] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 107.236746] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 109.881401] gl860: Genesys USB2.0 Camera is now controlling video device /dev/video0 [ 109.881879] usbcore: registered new interface driver usb_gl860_driver [ 109.882365] gl860: v0.3.0 : Genesys gl860 USB Video Camera [ 110.135130] lp: driver loaded but no devices found [ 110.294479] Adding 7815612k swap on /dev/sda2. Priority:-1 extents:1 across:7815612k [ 110.574368] EXT3 FS on sda1, internal journal [ 110.831743] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 110.831743] SGI XFS Quota Management subsystem [ 110.879975] XFS mounting filesystem sda5 [ 110.986746] Ending clean XFS mount for filesystem: sda5 [ 111.775692] type=1505 audit(1219928972.755:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=9245 [ 111.775692] type=1505 audit(1219928972.755:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=9245 [ 111.799658] type=1505 audit(1219928972.779:4): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=9249 [ 111.824760] type=1505 audit(1219928972.803:5): operation="profile_load" name="/usr/sbin/mysqld-akonadi" name2="default" pid=9256 [ 112.003471] ip_tables: (C) 2000-2006 Netfilter Core Team