[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-20-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu3) ) #33-Ubuntu SMP Tue Mar 27 16:42:26 UTC 2012 (Ubuntu 3.2.0-20.33-generic 3.2.12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-20-generic root=UUID=0542d6c9-2a98-4e71-b87b-ca477a21d61f ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000058000 (usable) [ 0.000000] BIOS-e820: 0000000000058000 - 0000000000059000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000000059000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] BIOS-e820: 0000000040200000 - 00000000da99f000 (usable) [ 0.000000] BIOS-e820: 00000000da99f000 - 00000000dae9f000 (reserved) [ 0.000000] BIOS-e820: 00000000dae9f000 - 00000000daf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000daf9f000 - 00000000dafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dafff000 - 00000000db000000 (usable) [ 0.000000] BIOS-e820: 00000000f80f8000 - 00000000f80f9000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000011e600000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] EFI v2.00 by Lenovo [ 0.000000] ACPI=0xdaffe000 ACPI 2.0=0xdaffe014 SMBIOS=0xdae9e000 [ 0.000000] Kernel-defined memdesc doesn't match the one from EFI! [ 0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000004e000) (0MB) [ 0.000000] EFI: mem02: type=3, attr=0xf, range=[0x000000000004e000-0x0000000000058000) (0MB) [ 0.000000] EFI: mem03: type=10, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB) [ 0.000000] EFI: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005e000) (0MB) [ 0.000000] EFI: mem05: type=4, attr=0xf, range=[0x000000000005e000-0x000000000005f000) (0MB) [ 0.000000] EFI: mem06: type=3, attr=0xf, range=[0x000000000005f000-0x00000000000a0000) (0MB) [ 0.000000] EFI: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x00000000005b9000) (4MB) [ 0.000000] EFI: mem08: type=7, attr=0xf, range=[0x00000000005b9000-0x0000000020000000) (506MB) [ 0.000000] EFI: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB) [ 0.000000] EFI: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x00000000363d6000) (353MB) [ 0.000000] EFI: mem11: type=2, attr=0xf, range=[0x00000000363d6000-0x00000000371e3000) (14MB) [ 0.000000] EFI: mem12: type=7, attr=0xf, range=[0x00000000371e3000-0x0000000040000000) (142MB) [ 0.000000] EFI: mem13: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB) [ 0.000000] EFI: mem14: type=7, attr=0xf, range=[0x0000000040200000-0x000000009e333000) (1505MB) [ 0.000000] EFI: mem15: type=2, attr=0xf, range=[0x000000009e333000-0x00000000d3da0000) (858MB) [ 0.000000] EFI: mem16: type=4, attr=0xf, range=[0x00000000d3da0000-0x00000000d3dc0000) (0MB) [ 0.000000] EFI: mem17: type=7, attr=0xf, range=[0x00000000d3dc0000-0x00000000d6203000) (36MB) [ 0.000000] EFI: mem18: type=4, attr=0xf, range=[0x00000000d6203000-0x00000000d6d90000) (11MB) [ 0.000000] EFI: mem19: type=7, attr=0xf, range=[0x00000000d6d90000-0x00000000d6f82000) (1MB) [ 0.000000] EFI: mem20: type=1, attr=0xf, range=[0x00000000d6f82000-0x00000000d6f9f000) (0MB) [ 0.000000] EFI: mem21: type=7, attr=0xf, range=[0x00000000d6f9f000-0x00000000d7788000) (7MB) [ 0.000000] EFI: mem22: type=4, attr=0xf, range=[0x00000000d7788000-0x00000000d77e2000) (0MB) [ 0.000000] EFI: mem23: type=7, attr=0xf, range=[0x00000000d77e2000-0x00000000d780c000) (0MB) [ 0.000000] EFI: mem24: type=4, attr=0xf, range=[0x00000000d780c000-0x00000000d7817000) (0MB) [ 0.000000] EFI: mem25: type=7, attr=0xf, range=[0x00000000d7817000-0x00000000d7819000) (0MB) [ 0.000000] EFI: mem26: type=4, attr=0xf, range=[0x00000000d7819000-0x00000000d781a000) (0MB) [ 0.000000] EFI: mem27: type=7, attr=0xf, range=[0x00000000d781a000-0x00000000d781b000) (0MB) [ 0.000000] EFI: mem28: type=4, attr=0xf, range=[0x00000000d781b000-0x00000000d8640000) (14MB) [ 0.000000] EFI: mem29: type=7, attr=0xf, range=[0x00000000d8640000-0x00000000d8642000) (0MB) [ 0.000000] EFI: mem30: type=4, attr=0xf, range=[0x00000000d8642000-0x00000000d86a4000) (0MB) [ 0.000000] EFI: mem31: type=7, attr=0xf, range=[0x00000000d86a4000-0x00000000d86a5000) (0MB) [ 0.000000] EFI: mem32: type=4, attr=0xf, range=[0x00000000d86a5000-0x00000000d8b2a000) (4MB) [ 0.000000] EFI: mem33: type=7, attr=0xf, range=[0x00000000d8b2a000-0x00000000d8b2b000) (0MB) [ 0.000000] EFI: mem34: type=4, attr=0xf, range=[0x00000000d8b2b000-0x00000000d8b83000) (0MB) [ 0.000000] EFI: mem35: type=7, attr=0xf, range=[0x00000000d8b83000-0x00000000d8b8b000) (0MB) [ 0.000000] EFI: mem36: type=4, attr=0xf, range=[0x00000000d8b8b000-0x00000000d9f9f000) (20MB) [ 0.000000] EFI: mem37: type=7, attr=0xf, range=[0x00000000d9f9f000-0x00000000da25f000) (2MB) [ 0.000000] EFI: mem38: type=2, attr=0xf, range=[0x00000000da25f000-0x00000000da265000) (0MB) [ 0.000000] EFI: mem39: type=3, attr=0xf, range=[0x00000000da265000-0x00000000da99f000) (7MB) [ 0.000000] EFI: mem40: type=5, attr=0x800000000000000f, range=[0x00000000da99f000-0x00000000daac3000) (1MB) [ 0.000000] EFI: mem41: type=5, attr=0x800000000000000f, range=[0x00000000daac3000-0x00000000dab9f000) (0MB) [ 0.000000] EFI: mem42: type=6, attr=0x800000000000000f, range=[0x00000000dab9f000-0x00000000dacb2000) (1MB) [ 0.000000] EFI: mem43: type=6, attr=0x800000000000000f, range=[0x00000000dacb2000-0x00000000dad9f000) (0MB) [ 0.000000] EFI: mem44: type=0, attr=0xf, range=[0x00000000dad9f000-0x00000000dae1f000) (0MB) [ 0.000000] EFI: mem45: type=0, attr=0xf, range=[0x00000000dae1f000-0x00000000dae9b000) (0MB) [ 0.000000] EFI: mem46: type=0, attr=0xf, range=[0x00000000dae9b000-0x00000000dae9c000) (0MB) [ 0.000000] EFI: mem47: type=0, attr=0xf, range=[0x00000000dae9c000-0x00000000dae9f000) (0MB) [ 0.000000] EFI: mem48: type=10, attr=0xf, range=[0x00000000dae9f000-0x00000000daedd000) (0MB) [ 0.000000] EFI: mem49: type=10, attr=0xf, range=[0x00000000daedd000-0x00000000daf9f000) (0MB) [ 0.000000] EFI: mem50: type=9, attr=0xf, range=[0x00000000daf9f000-0x00000000dafdd000) (0MB) [ 0.000000] EFI: mem51: type=9, attr=0xf, range=[0x00000000dafdd000-0x00000000dafff000) (0MB) [ 0.000000] EFI: mem52: type=4, attr=0xf, range=[0x00000000dafff000-0x00000000db000000) (0MB) [ 0.000000] EFI: mem53: type=7, attr=0xf, range=[0x0000000100000000-0x000000011e600000) (486MB) [ 0.000000] EFI: mem54: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB) [ 0.000000] EFI: mem55: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: LENOVO 4238AM3/4238AM3, BIOS 83ET67WW (1.37 ) 11/28/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x11e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask FE0000000 write-back [ 0.000000] 7 base 11F000000 mask FFF000000 uncachable [ 0.000000] 8 base 11E800000 mask FFF800000 uncachable [ 0.000000] 9 base 11E600000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000 [ 0.000000] 0000000000 - 00db000000 page 2M [ 0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000011e600000 [ 0.000000] 0100000000 - 011e600000 page 2M [ 0.000000] kernel direct mapping tables up to 11e600000 @ da25f000-da265000 [ 0.000000] RAMDISK: 363d6000 - 371e3000 [ 0.000000] ACPI: RSDP 00000000daffe014 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000daffe120 000AC (v01 LENOVO TP-83 00001370 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafe8000 000F4 (v04 LENOVO TP-83 00001370 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000dafeb000 0E40B (v01 LENOVO TP-83 00001370 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf2d000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-83 00001370 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000daffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 00000000dafe7000 00038 (v01 LENOVO TP-83 00001370 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafe6000 00098 (v01 LENOVO TP-83 00001370 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafe5000 0003C (v01 LENOVO TP-83 00001370 PTL 00000002) [ 0.000000] ACPI: ECDT 00000000dafe4000 00052 (v01 LENOVO TP-83 00001370 PTL 00000002) [ 0.000000] ACPI: ASF! 00000000dafea000 000A5 (v32 LENOVO TP-83 00001370 PTL 00000002) [ 0.000000] ACPI: TCPA 00000000dafe3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 00000000dafe2000 00A27 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafe1000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 00000000dafe0000 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-83 00001370 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafdd000 00292 (v01 LENOVO TP-83 00001370 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000011e600000 [ 0.000000] Initmem setup node 0 0000000000000000-000000011e600000 [ 0.000000] NODE_DATA [000000011e5fb000 - 000000011e5fffff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff880119c00000-ffff88011dbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0011e600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000058 [ 0.000000] 0: 0x00000059 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x000da99f [ 0.000000] 0: 0x000dafff -> 0x000db000 [ 0.000000] 0: 0x00100000 -> 0x0011e600 [ 0.000000] On node 0 totalpages: 1018671 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 10 pages reserved [ 0.000000] DMA zone: 3909 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 873952 pages, LIFO batch:31 [ 0.000000] Normal zone: 1944 pages used for memmap [ 0.000000] Normal zone: 122472 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000058000 - 0000000000059000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000da99f000 - 00000000dae9f000 [ 0.000000] PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000 [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000 [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000f80f8000 [ 0.000000] PM: Registered nosave memory: 00000000f80f8000 - 00000000f80f9000 [ 0.000000] PM: Registered nosave memory: 00000000f80f9000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at db000000 (gap: db000000:1d0f8000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011e200000 s83072 r8192 d23424 u262144 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1000333 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-20-generic root=UUID=0542d6c9-2a98-4e71-b87b-ca477a21d61f ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3851764k/4691968k available (6565k kernel code, 617284k absent, 222920k reserved, 6639k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2491.469 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4982.93 BogoMIPS (lpj=9965876) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.002060] Security Framework initialized [ 0.002072] AppArmor: AppArmor initialized [ 0.002073] Yama: becoming mindful. [ 0.002437] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003283] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003617] Mount-cache hash table entries: 256 [ 0.003711] Initializing cgroup subsys cpuacct [ 0.003715] Initializing cgroup subsys memory [ 0.003722] Initializing cgroup subsys devices [ 0.003724] Initializing cgroup subsys freezer [ 0.003726] Initializing cgroup subsys blkio [ 0.003730] Initializing cgroup subsys perf_event [ 0.003753] Disabled fast string operations [ 0.003755] CPU: Physical Processor ID: 0 [ 0.003756] CPU: Processor Core ID: 0 [ 0.003760] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003761] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003764] mce: CPU supports 7 MCE banks [ 0.003775] CPU0: Thermal monitoring enabled (TM1) [ 0.003781] using mwait in idle threads. [ 0.005555] ACPI: Core revision 20110623 [ 0.012339] ftrace: allocating 27049 entries in 107 pages [ 0.020098] DMAR: Host address width 36 [ 0.020100] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.020106] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.020108] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.020112] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.020114] DMAR: RMRR base: 0x000000dacd5000 end: 0x000000dacebfff [ 0.020115] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.020186] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.020187] HPET id 0 under DRHD base 0xfed91000 [ 0.020188] HPET id 0 under DRHD base 0xfed91000 [ 0.020189] HPET id 0 under DRHD base 0xfed91000 [ 0.020190] HPET id 0 under DRHD base 0xfed91000 [ 0.020191] HPET id 0 under DRHD base 0xfed91000 [ 0.020192] HPET id 0 under DRHD base 0xfed91000 [ 0.020193] HPET id 0 under DRHD base 0xfed91000 [ 0.020195] HPET id 0 under DRHD base 0xfed91000 [ 0.020415] Enabled IRQ remapping in x2apic mode [ 0.020416] Enabling x2apic [ 0.020417] Enabled x2apic [ 0.020423] Switched APIC routing to cluster x2apic. [ 0.020862] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060546] CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz stepping 07 [ 0.167982] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.167987] PEBS disabled due to CPU errata. [ 0.167989] ... version: 3 [ 0.167990] ... bit width: 48 [ 0.167991] ... generic registers: 4 [ 0.167992] ... value mask: 0000ffffffffffff [ 0.167993] ... max period: 000000007fffffff [ 0.167995] ... fixed-purpose events: 3 [ 0.167996] ... event mask: 000000070000000f [ 0.168168] NMI watchdog enabled, takes one hw-pmu counter. [ 0.168241] Booting Node 0, Processors #1 [ 0.168243] smpboot cpu 1: start_ip = 98000 [ 0.256002] Disabled fast string operations [ 0.276126] NMI watchdog enabled, takes one hw-pmu counter. [ 0.276208] #2 [ 0.276209] smpboot cpu 2: start_ip = 98000 [ 0.364016] Disabled fast string operations [ 0.384083] NMI watchdog enabled, takes one hw-pmu counter. [ 0.384153] #3 [ 0.384154] smpboot cpu 3: start_ip = 98000 [ 0.472029] Disabled fast string operations [ 0.492126] NMI watchdog enabled, takes one hw-pmu counter. [ 0.492153] Brought up 4 CPUs [ 0.492155] Total of 4 processors activated (19933.84 BogoMIPS). [ 0.495567] devtmpfs: initialized [ 0.496197] EVM: security.selinux [ 0.496198] EVM: security.SMACK64 [ 0.496199] EVM: security.capability [ 0.496222] PM: Registering ACPI NVS region at 58000 (4096 bytes) [ 0.496224] PM: Registering ACPI NVS region at dae9f000 (1048576 bytes) [ 0.496873] print_constraints: dummy: [ 0.496902] RTC time: 5:33:59, date: 04/10/12 [ 0.496928] NET: Registered protocol family 16 [ 0.497010] Trying to unpack rootfs image as initramfs... [ 0.497014] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.497016] ACPI: bus type pci registered [ 0.497245] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.497247] PCI: not using MMCONFIG [ 0.497249] PCI: Using configuration type 1 for base access [ 0.497945] bio: create slab at 0 [ 0.498011] ACPI: Added _OSI(Module Device) [ 0.498013] ACPI: Added _OSI(Processor Device) [ 0.498014] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.498016] ACPI: Added _OSI(Processor Aggregator Device) [ 0.499487] ACPI: EC: EC description table is found, configuring boot EC [ 0.503472] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.584533] ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.584911] ACPI: Dynamic OEM Table Load: [ 0.584914] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.604269] ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.604668] ACPI: Dynamic OEM Table Load: [ 0.604670] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.632152] ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.632531] ACPI: Dynamic OEM Table Load: [ 0.632533] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.644540] ACPI: Interpreter enabled [ 0.644543] ACPI: (supports S0 S3 S4 S5) [ 0.644561] ACPI: Using IOAPIC for interrupt routing [ 0.644579] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.680334] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.694330] ACPI: Power Resource [PUBS] (on) [ 0.696660] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.697367] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 0.697369] HEST: Table not found. [ 0.697372] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.697466] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.697510] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.697512] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.697514] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.697517] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfebfffff] [ 0.697519] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff] [ 0.697529] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.697565] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300 [ 0.697574] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.697580] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.697584] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f] [ 0.697636] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.697656] pci 0000:00:16.0: reg 10: [mem 0xf2525000-0xf252500f 64bit] [ 0.697721] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.697725] pci 0000:00:16.0: PME# disabled [ 0.697756] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200 [ 0.697775] pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff] [ 0.697783] pci 0000:00:19.0: reg 14: [mem 0xf252b000-0xf252bfff] [ 0.697792] pci 0000:00:19.0: reg 18: [io 0x5080-0x509f] [ 0.697857] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.697861] pci 0000:00:19.0: PME# disabled [ 0.697886] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.697907] pci 0000:00:1a.0: reg 10: [mem 0xf252a000-0xf252a3ff] [ 0.697997] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.698001] pci 0000:00:1a.0: PME# disabled [ 0.698025] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.698040] pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit] [ 0.698110] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.698113] pci 0000:00:1b.0: PME# disabled [ 0.698140] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.698271] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.698275] pci 0000:00:1c.0: PME# disabled [ 0.698310] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.698441] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.698446] pci 0000:00:1c.1: PME# disabled [ 0.698481] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 0.698611] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.698616] pci 0000:00:1c.3: PME# disabled [ 0.698650] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 0.698781] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.698786] pci 0000:00:1c.4: PME# disabled [ 0.698824] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.698845] pci 0000:00:1d.0: reg 10: [mem 0xf2529000-0xf25293ff] [ 0.698935] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.698939] pci 0000:00:1d.0: PME# disabled [ 0.698963] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601 [ 0.699087] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.699105] pci 0000:00:1f.2: reg 10: [io 0x50a8-0x50af] [ 0.699114] pci 0000:00:1f.2: reg 14: [io 0x50b4-0x50b7] [ 0.699122] pci 0000:00:1f.2: reg 18: [io 0x50a0-0x50a7] [ 0.699130] pci 0000:00:1f.2: reg 1c: [io 0x50b0-0x50b3] [ 0.699138] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f] [ 0.699146] pci 0000:00:1f.2: reg 24: [mem 0xf2528000-0xf25287ff] [ 0.699191] pci 0000:00:1f.2: PME# supported from D3hot [ 0.699195] pci 0000:00:1f.2: PME# disabled [ 0.699213] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.699228] pci 0000:00:1f.3: reg 10: [mem 0xf2524000-0xf25240ff 64bit] [ 0.699249] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.699350] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.699587] pci 0000:03:00.0: [8086:0085] type 0 class 0x000280 [ 0.699736] pci 0000:03:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit] [ 0.700484] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.700520] pci 0000:03:00.0: PME# disabled [ 0.708129] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.708139] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 0.708219] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.708225] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.708230] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff] [ 0.708239] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.708381] pci 0000:0d:00.0: [1180:e822] type 0 class 0x000880 [ 0.708408] pci 0000:0d:00.0: reg 10: [mem 0xf1401000-0xf14010ff] [ 0.708604] pci 0000:0d:00.0: supports D1 D2 [ 0.708605] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.708611] pci 0000:0d:00.0: PME# disabled [ 0.708677] pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00 [ 0.708702] pci 0000:0d:00.3: reg 10: [mem 0xf1400000-0xf14007ff] [ 0.708900] pci 0000:0d:00.3: supports D1 D2 [ 0.708901] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.708906] pci 0000:0d:00.3: PME# disabled [ 0.716123] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.716127] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.716131] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff] [ 0.716140] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.716177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.716259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.716279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.716298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.716319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.716425] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.716549] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d [ 0.716550] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.718192] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.718234] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.718273] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.718312] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.718350] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.718388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.718425] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.718463] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.718559] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.718565] vgaarb: loaded [ 0.718566] vgaarb: bridge control possible 0000:00:02.0 [ 0.718637] i2c-core: driver [aat2870] using legacy suspend method [ 0.718638] i2c-core: driver [aat2870] using legacy resume method [ 0.718685] SCSI subsystem initialized [ 0.718733] libata version 3.00 loaded. [ 0.718766] usbcore: registered new interface driver usbfs [ 0.718774] usbcore: registered new interface driver hub [ 0.718795] usbcore: registered new device driver usb [ 0.718859] PCI: Using ACPI for IRQ routing [ 0.720575] PCI: pci_cache_line_size set to 64 bytes [ 0.720783] reserve RAM buffer: 0000000000058000 - 000000000005ffff [ 0.720785] reserve RAM buffer: 00000000da99f000 - 00000000dbffffff [ 0.720787] reserve RAM buffer: 00000000db000000 - 00000000dbffffff [ 0.720789] reserve RAM buffer: 000000011e600000 - 000000011fffffff [ 0.720863] NetLabel: Initializing [ 0.720864] NetLabel: domain hash size = 128 [ 0.720865] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.720874] NetLabel: unlabeled traffic allowed by default [ 0.720915] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.720920] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.722934] Switching to clocksource hpet [ 0.726100] Freeing initrd memory: 14388k freed [ 0.728231] AppArmor: AppArmor Filesystem Enabled [ 0.728268] pnp: PnP ACPI init [ 0.728288] ACPI: bus type pnp registered [ 0.728607] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.728608] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.728610] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.728611] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.728613] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.728614] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.728616] pnp 00:00: [mem 0x000d4000-0x000d7fff] [ 0.728617] pnp 00:00: [mem 0x000d8000-0x000dbfff] [ 0.728618] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 0.728620] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.728621] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.728622] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.728624] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.728625] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.728627] pnp 00:00: [mem 0x00100000-0xdf9fffff] [ 0.728628] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.728629] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.728674] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.728677] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.728679] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.728681] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.728682] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.728684] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.728686] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.728688] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.728690] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.728692] system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved [ 0.728693] system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved [ 0.728695] system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved [ 0.728697] system 00:00: [mem 0x000ec000-0x000effff] has been reserved [ 0.728699] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.728701] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved [ 0.728704] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.728706] system 00:00: [mem 0xfed4c000-0xffffffff] has been reserved [ 0.728709] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.728725] pnp 00:01: [bus 00-fe] [ 0.728726] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.728728] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.728730] pnp 00:01: [io 0x0d00-0xffff window] [ 0.728731] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.728733] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.728734] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.728736] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.728738] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.728739] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.728741] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.728742] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.728744] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.728745] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.728747] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.728748] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.728750] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.728751] pnp 00:01: [mem 0xdfa00000-0xfebfffff window] [ 0.728753] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 0.728799] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.728845] pnp 00:02: [io 0x0010-0x001f] [ 0.728846] pnp 00:02: [io 0x0090-0x009f] [ 0.728848] pnp 00:02: [io 0x0024-0x0025] [ 0.728849] pnp 00:02: [io 0x0028-0x0029] [ 0.728850] pnp 00:02: [io 0x002c-0x002d] [ 0.728853] pnp 00:02: [io 0x0030-0x0031] [ 0.728855] pnp 00:02: [io 0x0034-0x0035] [ 0.728856] pnp 00:02: [io 0x0038-0x0039] [ 0.728857] pnp 00:02: [io 0x003c-0x003d] [ 0.728858] pnp 00:02: [io 0x00a4-0x00a5] [ 0.728860] pnp 00:02: [io 0x00a8-0x00a9] [ 0.728861] pnp 00:02: [io 0x00ac-0x00ad] [ 0.728862] pnp 00:02: [io 0x00b0-0x00b5] [ 0.728863] pnp 00:02: [io 0x00b8-0x00b9] [ 0.728865] pnp 00:02: [io 0x00bc-0x00bd] [ 0.728866] pnp 00:02: [io 0x0050-0x0053] [ 0.728867] pnp 00:02: [io 0x0072-0x0077] [ 0.728869] pnp 00:02: [io 0x0400-0x047f] [ 0.728870] pnp 00:02: [io 0x0500-0x057f] [ 0.728871] pnp 00:02: [io 0x0800-0x080f] [ 0.728873] pnp 00:02: [io 0x15e0-0x15ef] [ 0.728874] pnp 00:02: [io 0x1600-0x167f] [ 0.728875] pnp 00:02: [mem 0xf8000000-0xfbffffff] [ 0.728877] pnp 00:02: [mem 0x00000000-0x00000fff] [ 0.728878] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 0.728880] pnp 00:02: [mem 0xfed10000-0xfed13fff] [ 0.728881] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 0.728882] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 0.728884] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 0.728927] system 00:02: [io 0x0400-0x047f] has been reserved [ 0.728929] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.728930] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.728933] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.728937] system 00:02: [io 0x1600-0x167f] has been reserved [ 0.728940] system 00:02: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.728941] system 00:02: [mem 0x00000000-0x00000fff] could not be reserved [ 0.728943] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.728945] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.728947] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.728949] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.728951] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.728953] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.728987] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.729009] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.729016] pnp 00:04: [io 0x0000-0x000f] [ 0.729017] pnp 00:04: [io 0x0080-0x008f] [ 0.729018] pnp 00:04: [io 0x00c0-0x00df] [ 0.729020] pnp 00:04: [dma 4] [ 0.729039] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.729044] pnp 00:05: [io 0x0061] [ 0.729063] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.729070] pnp 00:06: [io 0x00f0] [ 0.729082] pnp 00:06: [irq 13] [ 0.729105] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.729111] pnp 00:07: [io 0x0070-0x0071] [ 0.729117] pnp 00:07: [irq 8] [ 0.729136] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.729142] pnp 00:08: [io 0x0060] [ 0.729143] pnp 00:08: [io 0x0064] [ 0.729148] pnp 00:08: [irq 1] [ 0.729168] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.729179] pnp 00:09: [irq 12] [ 0.729202] pnp 00:09: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 0.729228] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.729248] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.729652] pnp: PnP ACPI: found 11 devices [ 0.729653] ACPI: ACPI bus type pnp unregistered [ 0.736118] PCI: max bus depth: 1 pci_try_num: 2 [ 0.736167] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.736185] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.736192] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 0.736204] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.736208] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.736214] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff] [ 0.736220] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.736228] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.736232] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.736239] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff] [ 0.736244] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.736267] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.736275] pci 0000:00:1c.0: setting latency timer to 64 [ 0.736287] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.736292] pci 0000:00:1c.1: setting latency timer to 64 [ 0.736303] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.736308] pci 0000:00:1c.3: setting latency timer to 64 [ 0.736315] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.736321] pci 0000:00:1c.4: setting latency timer to 64 [ 0.736325] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.736326] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.736328] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.736330] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff] [ 0.736332] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] [ 0.736333] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff] [ 0.736335] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.736337] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff] [ 0.736339] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.736341] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.736342] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff] [ 0.736344] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.736370] NET: Registered protocol family 2 [ 0.736496] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.737686] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.738882] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.739012] TCP: Hash tables configured (established 524288 bind 65536) [ 0.739014] TCP reno registered [ 0.739024] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.739040] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.739130] NET: Registered protocol family 1 [ 0.739142] pci 0000:00:02.0: Boot video device [ 0.739156] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.739160] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.739167] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.739194] pci 0000:00:1a.0: PCI INT A disabled [ 0.739214] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.739218] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.739231] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.739256] pci 0000:00:1d.0: PCI INT A disabled [ 0.739342] PCI: CLS 64 bytes, default 64 [ 0.739346] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.739348] Placing 64MB software IO TLB between ffff8800cfda0000 - ffff8800d3da0000 [ 0.739350] software IO TLB at phys 0xcfda0000 - 0xd3da0000 [ 0.739743] audit: initializing netlink socket (disabled) [ 0.739749] type=2000 audit(1334036039.576:1): initialized [ 0.764638] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.774391] VFS: Disk quotas dquot_6.5.2 [ 0.774431] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.774796] fuse init (API version 7.17) [ 0.774865] msgmni has been set to 7668 [ 0.775159] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.775181] io scheduler noop registered [ 0.775183] io scheduler deadline registered [ 0.775208] io scheduler cfq registered (default) [ 0.775558] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.775574] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.775609] intel_idle: MWAIT substates: 0x21120 [ 0.775610] intel_idle: v0.4 model 0x2A [ 0.775612] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.775958] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.776275] ACPI: AC Adapter [AC] (on-line) [ 0.776388] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.776635] ACPI: Lid Switch [LID] [ 0.776681] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.776717] ACPI: Sleep Button [SLPB] [ 0.776766] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.776769] ACPI: Power Button [PWRF] [ 0.779072] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.779074] ACPI: Thermal Zone [THM0] (50 C) [ 0.779088] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.779094] ACPI: Battery Slot [BAT0] (battery present) [ 0.779112] ERST: Table is not found! [ 0.779113] GHES: HEST is not enabled! [ 0.779208] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.793699] ACPI: Battery Slot [BAT0] (battery present) [ 1.023464] Linux agpgart interface v0.103 [ 1.023527] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.023647] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.024731] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 1.024829] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.025827] brd: module loaded [ 1.026345] loop: module loaded [ 1.026438] ahci 0000:00:1f.2: version 3.0 [ 1.026449] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.026493] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.026517] ahci: SSS flag set, parallel bus scan disabled [ 1.039231] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 1.039240] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 1.039252] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.063608] scsi0 : ahci [ 1.063680] scsi1 : ahci [ 1.063738] scsi2 : ahci [ 1.063796] scsi3 : ahci [ 1.063848] scsi4 : ahci [ 1.063902] scsi5 : ahci [ 1.064271] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 42 [ 1.064274] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 42 [ 1.064276] ata3: DUMMY [ 1.064279] ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 42 [ 1.064282] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 42 [ 1.064283] ata6: DUMMY [ 1.064543] Fixed MDIO Bus: probed [ 1.064558] tun: Universal TUN/TAP device driver, 1.6 [ 1.064560] tun: (C) 1999-2004 Max Krasnyansky [ 1.064608] PPP generic driver version 2.4.2 [ 1.064697] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.064710] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1.064714] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1.064720] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.064737] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.064740] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.064779] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.064805] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.068687] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.068699] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf252a000 [ 1.083202] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.083365] hub 1-0:1.0: USB hub found [ 1.083368] hub 1-0:1.0: 3 ports detected [ 1.083417] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.083421] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.083427] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.083439] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.083442] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.083482] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.083502] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.087398] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.087409] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2529000 [ 1.103200] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.103354] hub 2-0:1.0: USB hub found [ 1.103357] hub 2-0:1.0: 3 ports detected [ 1.103402] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.103411] uhci_hcd: USB Universal Host Controller Interface driver [ 1.103442] usbcore: registered new interface driver libusual [ 1.103468] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.106401] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.106405] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.106500] mousedev: PS/2 mouse device common for all mice [ 1.106641] rtc_cmos 00:07: RTC can wake from S4 [ 1.106740] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.106766] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.106821] device-mapper: uevent: version 1.0.3 [ 1.106876] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.106969] cpuidle: using governor ladder [ 1.107102] cpuidle: using governor menu [ 1.107104] EFI Variables Facility v0.08 2004-May-17 [ 1.110303] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.127987] TCP cubic registered [ 1.128059] NET: Registered protocol family 10 [ 1.128363] NET: Registered protocol family 17 [ 1.128375] Registering the dns_resolver key type [ 1.128512] PM: Hibernation image not present or could not be loaded. [ 1.128520] registered taskstats version 1 [ 1.138362] Magic number: 8:295:567 [ 1.138366] misc network_latency: hash matches [ 1.138456] rtc_cmos 00:07: setting system clock to 2012-04-10 05:34:00 UTC (1334036040) [ 1.145444] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.145445] EDD information not available. [ 1.383352] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.383925] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.383929] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.383931] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.395356] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.431259] ata1.00: ATA-8: TOSHIBA MK3261GSY, MC102E, max UDMA/100 [ 1.431269] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.432492] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.432505] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.432514] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.433649] ata1.00: configured for UDMA/100 [ 1.433854] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3261GS MC10 PQ: 0 ANSI: 5 [ 1.433975] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.434010] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.434053] sd 0:0:0:0: [sda] Write Protect is off [ 1.434056] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.434084] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.521065] sda: sda1 sda2 sda3 sda4 [ 1.521781] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.528242] hub 1-1:1.0: USB hub found [ 1.528397] hub 1-1:1.0: 6 ports detected [ 1.639401] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.739408] Refined TSC clocksource calibration: 2491.905 MHz. [ 1.739423] Switching to clocksource tsc [ 1.751414] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.756623] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.758232] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.758244] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.762111] ata2.00: ATAPI: HL-DT-ST DVDRAM GT50N, LT20, max UDMA/33 [ 1.769281] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.770969] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.770982] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.772263] hub 2-1:1.0: USB hub found [ 1.772430] hub 2-1:1.0: 8 ports detected [ 1.774719] ata2.00: configured for UDMA/33 [ 1.779338] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT50N LT20 PQ: 0 ANSI: 5 [ 1.785944] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.785954] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.786110] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.786184] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.843580] usb 1-1.4: new full-speed USB device number 3 using ehci_hcd [ 2.043576] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd [ 2.103464] ata4: SATA link down (SStatus 0 SControl 300) [ 2.211645] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [ 2.310016] Initializing USB Mass Storage driver... [ 2.310201] scsi6 : usb-storage 2-1.2:1.0 [ 2.310255] usbcore: registered new interface driver usb-storage [ 2.310257] USB Mass Storage support registered. [ 2.379665] usb 2-1.5: new full-speed USB device number 5 using ehci_hcd [ 2.423517] ata5: SATA link down (SStatus 0 SControl 300) [ 2.424745] Freeing unused kernel memory: 920k freed [ 2.424831] Write protecting the kernel read-only data: 12288k [ 2.428215] Freeing unused kernel memory: 1608k freed [ 2.430834] Freeing unused kernel memory: 1200k freed [ 2.442090] udevd[111]: starting version 175 [ 2.472548] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 2.472551] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 2.472590] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.472603] e1000e 0000:00:19.0: setting latency timer to 64 [ 2.472716] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 2.473860] sdhci: Secure Digital Host Controller Interface driver [ 2.473863] sdhci: Copyright(c) Pierre Ossman [ 2.474103] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8) [ 2.474161] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.474230] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 2.474241] mmc0: no vmmc regulator found [ 2.474268] Registered led device: mmc0:: [ 2.475344] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 2.484553] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4 [ 2.486292] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.1/input0 [ 2.486313] usbcore: registered new interface driver usbhid [ 2.486315] usbhid: USB HID core driver [ 2.489283] firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.489330] firewire_ohci 0000:0d:00.3: setting latency timer to 64 [ 2.551545] firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 2.663232] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:b7:d6:c8 [ 2.663235] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 2.663286] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 2.841276] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.051689] firewire_core: created device fw0: GUID 0021cc20090d3150, S400 [ 3.310195] scsi 6:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS [ 3.310983] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.312168] sd 6:0:0:0: [sdb] 15240576 512-byte logical blocks: (7.80 GB/7.26 GiB) [ 3.312782] sd 6:0:0:0: [sdb] Write Protect is off [ 3.312785] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3.313399] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.313401] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.317146] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.317148] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.318280] sdb: sdb1 [ 3.320898] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.320899] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.320901] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 7.262482] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.497973] Adding 4095996k swap on /dev/sda3. Priority:-1 extents:1 across:4095996k [ 7.591860] udevd[601]: starting version 175 [ 8.266554] lp: driver loaded but no devices found [ 9.072326] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 9.072709] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.072717] mei 0000:00:16.0: setting latency timer to 64 [ 9.072806] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 9.114313] wmi: Mapper loaded [ 9.145872] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78) [ 9.146362] Non-volatile memory driver v1.3 [ 9.306702] [drm] Initialized drm 1.1.0 20060810 [ 9.354503] i915 0000:00:02.0: power state changed by ACPI to D0 [ 9.354506] i915 0000:00:02.0: power state changed by ACPI to D0 [ 9.354511] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.354514] i915 0000:00:02.0: setting latency timer to 64 [ 9.402809] mtrr: no more MTRRs available [ 9.402812] [drm] MTRR allocation failed. Graphics performance may suffer. [ 9.403135] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 9.403140] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.403141] [drm] Driver supports precise vblank timestamp query. [ 9.403170] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.539137] device-mapper: multipath: version 1.3.0 loaded [ 9.964367] cfg80211: Calling CRDA to update world regulatory domain [ 10.168377] fbcon: inteldrmfb (fb0) is primary device [ 10.344903] Console: switching to colour frame buffer device 170x48 [ 10.346825] fb0: inteldrmfb frame buffer device [ 10.346826] drm: registered panic notifier [ 10.369897] acpi device:01: registered as cooling_device4 [ 10.370555] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 10.370821] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 10.370899] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 10.486548] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 10.486551] Copyright(c) 2003-2011 Intel Corporation [ 10.486925] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.486989] iwlwifi 0000:03:00.0: setting latency timer to 64 [ 10.487035] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [ 10.487037] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005098000 [ 10.487039] iwlwifi 0000:03:00.0: HW Revision ID = 0x34 [ 10.487367] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 10.487483] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 10.487588] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 10.495130] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 10.495134] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 10.495135] thinkpad_acpi: ThinkPad BIOS 83ET67WW (1.37 ), EC unknown [ 10.495137] thinkpad_acpi: Lenovo ThinkPad T420, model 4238AM3 [ 10.495544] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 10.495884] thinkpad_acpi: radio switch found; radios are enabled [ 10.497193] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 10.497558] Registered led device: tpacpi::thinklight [ 10.497590] Registered led device: tpacpi::power [ 10.497609] Registered led device: tpacpi::standby [ 10.497627] Registered led device: tpacpi::thinkvantage [ 10.497635] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 10.498197] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 10.498551] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6 [ 10.498553] iwlwifi 0000:03:00.0: Device SKU: 0X1f0 [ 10.498555] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3 [ 10.498633] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 10.498897] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 10.818724] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000 [ 10.818739] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 10.872779] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 11.374883] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 11.374942] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 11.374967] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 11.432690] cfg80211: World regulatory domain updated: [ 11.432692] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.432694] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.432695] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.432697] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.432698] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.432699] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.463986] Bluetooth: Core ver 2.16 [ 11.464005] NET: Registered protocol family 31 [ 11.464007] Bluetooth: HCI device and connection manager initialized [ 11.464010] Bluetooth: HCI socket layer initialized [ 11.464011] Bluetooth: L2CAP socket layer initialized [ 11.464017] Bluetooth: SCO socket layer initialized [ 11.484426] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 11.484573] usbcore: registered new interface driver btusb [ 11.505679] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301 [ 11.505828] Registered led device: phy0-led [ 11.505854] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 11.617756] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 11.673592] type=1400 audit(1334036051.031:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1007 comm="apparmor_parser" [ 11.673630] type=1400 audit(1334036051.031:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=861 comm="apparmor_parser" [ 11.673656] type=1400 audit(1334036051.031:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=890 comm="apparmor_parser" [ 11.673894] type=1400 audit(1334036051.031:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=861 comm="apparmor_parser" [ 11.673934] type=1400 audit(1334036051.031:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1007 comm="apparmor_parser" [ 11.673995] type=1400 audit(1334036051.031:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=890 comm="apparmor_parser" [ 11.674042] type=1400 audit(1334036051.031:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=861 comm="apparmor_parser" [ 11.674132] type=1400 audit(1334036051.031:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1007 comm="apparmor_parser" [ 11.674193] type=1400 audit(1334036051.031:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=890 comm="apparmor_parser" [ 12.245947] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 12.246004] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 12.246042] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0 [ 12.246104] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 12.246176] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.246239] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.926474] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 15.414935] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 16.692171] init: failsafe main process (1196) killed by TERM signal [ 17.696073] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 17.961148] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11 [ 20.150467] type=1400 audit(1334036059.507:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1302 comm="apparmor_parser" [ 20.150801] type=1400 audit(1334036059.507:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1302 comm="apparmor_parser" [ 20.150996] type=1400 audit(1334036059.507:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1302 comm="apparmor_parser" [ 20.173679] ppdev: user-space parallel port driver [ 20.392364] type=1400 audit(1334036059.747:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1305 comm="apparmor_parser" [ 20.863116] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.863119] Bluetooth: BNEP filters: protocol multicast [ 20.892091] Bluetooth: RFCOMM TTY layer initialized [ 20.892095] Bluetooth: RFCOMM socket layer initialized [ 20.892096] Bluetooth: RFCOMM ver 1.11 [ 20.914455] type=1400 audit(1334036060.267:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1301 comm="apparmor_parser" [ 20.971005] type=1400 audit(1334036060.327:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1330 comm="apparmor_parser" [ 20.979281] type=1400 audit(1334036060.335:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1306 comm="apparmor_parser" [ 20.979617] type=1400 audit(1334036060.335:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1306 comm="apparmor_parser" [ 21.002755] type=1400 audit(1334036060.359:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1316 comm="apparmor_parser" [ 21.002770] type=1400 audit(1334036060.359:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1317 comm="apparmor_parser" [ 24.075305] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 24.131200] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 24.131502] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.131729] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.132751] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 24.132941] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 24.418740] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 24.418930] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 24.536942] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.537326] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.750203] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 25.750206] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 25.750437] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.406145] thinkpad_ec: thinkpad_ec 0.41 loaded. [ 27.406799] hdaps: initial mode latch is 0x05 [ 27.406923] hdaps: setting ec_rate=250, filter_order=2 [ 27.407140] hdaps: device successfully initialized. [ 27.407197] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input12 [ 27.407306] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input13 [ 27.407366] hdaps: driver successfully loaded. [ 28.559171] Bridge firewalling registered [ 28.859832] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.937691] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 30.122048] ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 31.056951] vboxdrv: Found 4 processor cores. [ 31.057172] vboxdrv: fAsync=0 offMin=0x253 offMax=0xe62 [ 31.057227] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 31.057230] vboxdrv: Successfully loaded version 4.1.12 (interface 0x00190000). [ 31.121440] Ebtables v2.0 registered [ 31.243751] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 31.412440] vboxpci: IOMMU not found (not registered) [ 33.059019] wlan0: authenticate with e0:91:53:57:4a:b3 (try 1) [ 33.061925] wlan0: authenticated [ 33.099299] wlan0: associate with e0:91:53:57:4a:b3 (try 1) [ 33.102774] wlan0: RX AssocResp from e0:91:53:57:4a:b3 (capab=0x431 status=0 aid=2) [ 33.102781] wlan0: associated [ 33.106085] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 33.106157] cfg80211: Calling CRDA for country: ES [ 33.108462] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 33.108465] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108467] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 33.108468] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108470] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 33.108471] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108473] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 33.108474] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108476] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 33.108477] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108479] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 33.108480] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108481] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 33.108483] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108484] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 33.108486] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108487] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 33.108489] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108490] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 33.108492] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108493] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 33.108495] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108496] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 33.108497] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108499] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 33.108500] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108502] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 33.108503] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108505] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 33.108506] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108508] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 33.108509] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108510] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 33.108512] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108513] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 33.108515] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108516] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 33.108518] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108519] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 33.108521] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108522] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 33.108523] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 33.108525] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 33.108526] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108528] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 33.108529] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108530] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 33.108532] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108533] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 33.108535] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108536] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 33.108538] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108539] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule: [ 33.108541] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108542] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule: [ 33.108544] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108545] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule: [ 33.108546] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108548] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 33.108549] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108551] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 33.108552] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108553] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 33.108555] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 33.108556] cfg80211: Disabling freq 5745 MHz [ 33.108557] cfg80211: Disabling freq 5765 MHz [ 33.108558] cfg80211: Disabling freq 5785 MHz [ 33.108559] cfg80211: Disabling freq 5805 MHz [ 33.108560] cfg80211: Disabling freq 5825 MHz [ 33.108563] cfg80211: Regulatory domain changed to country: ES [ 33.108564] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 33.108565] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 33.108567] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 33.108568] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 33.108569] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 37.149273] eth0: no IPv6 routers present [ 40.514881] init: plymouth-stop pre-start process (2572) terminated with status 1 [ 45.591220] wlan0: no IPv6 routers present [ 73.378435] init: tty1 main process ended, respawning [ 74.822227] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 80.397949] wlan0: deauthenticating from e0:91:53:57:4a:b3 by local choice (reason=3) [ 80.615707] cfg80211: All devices are disconnected, going to restore regulatory settings [ 80.615711] cfg80211: Restoring regulatory settings [ 80.615717] cfg80211: Calling CRDA to update world regulatory domain [ 80.618477] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 80.618481] cfg80211: World regulatory domain updated: [ 80.618482] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 80.618484] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 80.618485] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 80.618487] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 80.618488] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 80.618490] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 85.866360] wlan0: authenticate with e0:91:53:57:4a:b3 (try 1) [ 86.066256] wlan0: authenticate with e0:91:53:57:4a:b3 (try 2) [ 86.266376] wlan0: authenticate with e0:91:53:57:4a:b3 (try 3) [ 86.466548] wlan0: authentication with e0:91:53:57:4a:b3 timed out [ 94.165918] wlan0: authenticate with e0:91:53:57:4a:b3 (try 1) [ 94.363813] wlan0: authenticate with e0:91:53:57:4a:b3 (try 2) [ 94.563942] wlan0: authenticate with e0:91:53:57:4a:b3 (try 3) [ 94.764074] wlan0: authentication with e0:91:53:57:4a:b3 timed out [ 102.453472] wlan0: authenticate with e0:91:53:57:4a:b3 (try 1) [ 102.653409] wlan0: authenticate with e0:91:53:57:4a:b3 (try 2) [ 102.853521] wlan0: authenticate with e0:91:53:57:4a:b3 (try 3) [ 103.053743] wlan0: authentication with e0:91:53:57:4a:b3 timed out [ 133.606781] wlan0: authenticate with e0:91:53:57:4a:b3 (try 1) [ 133.609555] wlan0: authenticated [ 133.609854] wlan0: associate with e0:91:53:57:4a:b3 (try 1) [ 133.612548] wlan0: RX ReassocResp from e0:91:53:57:4a:b3 (capab=0x431 status=0 aid=7) [ 133.612565] wlan0: associated [ 133.615989] cfg80211: Calling CRDA for country: ES [ 133.623285] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 133.623293] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623298] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 133.623303] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623307] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 133.623312] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623317] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 133.623321] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623325] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 133.623330] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623334] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 133.623339] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623343] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 133.623348] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623352] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 133.623356] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623360] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 133.623365] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623369] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 133.623373] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623377] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 133.623382] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623386] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 133.623390] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623394] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 133.623399] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623403] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 133.623408] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623412] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 133.623416] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623420] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 133.623424] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623428] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 133.623432] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623437] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 133.623441] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623445] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 133.623450] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623454] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 133.623459] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623464] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 133.623469] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 133.623473] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 133.623477] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623481] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 133.623486] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623489] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 133.623494] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623498] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 133.623502] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623507] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 133.623512] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623515] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule: [ 133.623520] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623524] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule: [ 133.623528] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623532] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule: [ 133.623536] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623540] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 133.623545] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623549] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 133.623553] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623557] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 133.623562] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm) [ 133.623566] cfg80211: Disabling freq 5745 MHz [ 133.623569] cfg80211: Disabling freq 5765 MHz [ 133.623571] cfg80211: Disabling freq 5785 MHz [ 133.623574] cfg80211: Disabling freq 5805 MHz [ 133.623577] cfg80211: Disabling freq 5825 MHz [ 133.623584] cfg80211: Regulatory domain changed to country: ES [ 133.623587] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 133.623591] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 133.623595] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 133.623598] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 133.623602] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 142.130404] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [ 144.281166] wlan0: no IPv6 routers present [ 152.774711] show_signal_msg: 36 callbacks suppressed [ 152.774724] VirtualBox[3821]: segfault at 29 ip 00007f09b909124c sp 00007fff02e2f938 error 4 in libQtCore.so.4.8.1[7f09b8fcf000+2c6000] [ 179.859108] VirtualBox[3995]: segfault at 69 ip 00007f020fa9024c sp 00007fffaf898608 error 4 in libQtCore.so.4.8.1[7f020f9ce000+2c6000] [ 186.188121] VirtualBox[4042]: segfault at 99 ip 00007f786f40b24c sp 00007fff71228aa8 error 4 in libQtCore.so.4.8.1[7f786f349000+2c6000] [ 419.795233] VirtualBox[4259]: segfault at 29 ip 00007fcbbf51024c sp 00007fffaf058f88 error 4 in libQtCore.so.4.8.1[7fcbbf44e000+2c6000] [ 436.544835] usb 1-1.1: new high-speed USB device number 4 using ehci_hcd [ 436.644410] scsi7 : usb-storage 1-1.1:1.0 [ 437.651893] scsi 7:0:0:0: Direct-Access SAMSUNG HM641JI PQ: 0 ANSI: 4 [ 437.653322] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 437.655174] sd 7:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 437.661722] sd 7:0:0:0: [sdc] Write Protect is off [ 437.661733] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 437.668329] sd 7:0:0:0: [sdc] No Caching mode page present [ 437.668334] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 437.683034] sd 7:0:0:0: [sdc] No Caching mode page present [ 437.683045] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 437.711063] sdc: sdc1 [ 437.735809] sd 7:0:0:0: [sdc] No Caching mode page present [ 437.735821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 437.735829] sd 7:0:0:0: [sdc] Attached SCSI disk [ 438.245816] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended [ 438.265027] EXT4-fs (sdc1): recovery complete [ 438.265824] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)