[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-23-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC 2010 (Ubuntu 2.6.32-23.37-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37856000 - 37fef8ff [ 0.000000] Allocated new RAMDISK: 008e0000 - 010798ff [ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef8fe to 008e0000 - 010798fe [ 0.000000] ACPI: RSDP 000f7300 00014 (v00 AWARD ) [ 0.000000] ACPI: RSDT 7fff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 7fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 7fff30c0 03A02 (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7fff0000 00040 [ 0.000000] ACPI: APIC 7fff6b00 00068 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008dc000 - 00008df06e] BRK ==> [00008dc000 - 00008df06e] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e0000 - 00010798ff] NEW RAMDISK ==> [00008e0000 - 00010798ff] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f5990] f5990 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524159 [ 0.000000] free_area_init_node: node 0, pgdat c0798760, node_mem_map c107b200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic root=UUID=99603b40-ea89-415d-9c30-d500db008607 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10485120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0) [ 0.000000] Memory: 2052116k/2097088k available (4676k kernel code, 43444k reserved, 2118k data, 660k init, 1187784k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591293 - 0xc07a2e88 (2118 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591293 (4676 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3207.490 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6414.98 BogoMIPS (lpj=12829960) [ 0.004029] Security Framework initialized [ 0.004059] AppArmor: AppArmor initialized [ 0.004069] Mount-cache hash table entries: 512 [ 0.004254] Initializing cgroup subsys ns [ 0.004262] Initializing cgroup subsys cpuacct [ 0.004267] Initializing cgroup subsys memory [ 0.004277] Initializing cgroup subsys devices [ 0.004281] Initializing cgroup subsys freezer [ 0.004284] Initializing cgroup subsys net_cls [ 0.004319] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004323] CPU: L2 cache: 1024K [ 0.004326] CPU: Physical Processor ID: 0 [ 0.004329] CPU: Processor Core ID: 0 [ 0.004333] mce: CPU supports 4 MCE banks [ 0.004349] CPU0: Thermal monitoring enabled (TM1) [ 0.004356] using mwait in idle threads. [ 0.008007] Performance Events: no PMU driver, software events only. [ 0.008017] Checking 'hlt' instruction... OK. [ 0.027920] ACPI: Core revision 20090903 [ 0.036014] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036020] ftrace: allocating 21776 entries in 43 pages [ 0.040085] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040340] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.080726] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.008000] CPU: L2 cache: 1024K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 0 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.168124] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04 [ 0.168143] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172027] Brought up 2 CPUs [ 0.172032] Total of 2 processors activated (12829.93 BogoMIPS). [ 0.172362] CPU0 attaching sched-domain: [ 0.172368] domain 0: span 0-1 level SIBLING [ 0.172371] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.172379] domain 1: span 0-1 level MC [ 0.172382] groups: 0-1 (cpu_power = 1178) [ 0.172391] CPU1 attaching sched-domain: [ 0.172394] domain 0: span 0-1 level SIBLING [ 0.172396] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.172403] domain 1: span 0-1 level MC [ 0.172406] groups: 0-1 (cpu_power = 1178) [ 0.172561] devtmpfs: initialized [ 0.172561] regulator: core version 0.5 [ 0.172561] Time: 21:02:03 Date: 07/03/10 [ 0.172561] NET: Registered protocol family 16 [ 0.172561] Trying to unpack rootfs image as initramfs... [ 0.172561] EISA bus registered [ 0.172561] ACPI: bus type pci registered [ 0.196665] PCI: PCI BIOS revision 2.10 entry at 0xfb510, last bus=1 [ 0.196671] PCI: Using configuration type 1 for base access [ 0.198789] bio: create slab at 0 [ 0.199833] ACPI: EC: Look up EC in DSDT [ 0.208596] ACPI: Interpreter enabled [ 0.208611] ACPI: (supports S0 S1 S4 S5) [ 0.208656] ACPI: Using IOAPIC for interrupt routing [ 0.215984] ACPI: No dock devices found. [ 0.216170] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.216253] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.216486] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] [ 0.216496] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] [ 0.216507] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] [ 0.216517] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] [ 0.216527] pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] [ 0.216565] pci 0000:00:02.5: PME# supported from D3cold [ 0.216572] pci 0000:00:02.5: PME# disabled [ 0.216618] pci 0000:00:02.7: reg 10 io port: [0xd000-0xd0ff] [ 0.216628] pci 0000:00:02.7: reg 14 io port: [0xd400-0xd47f] [ 0.216682] pci 0000:00:02.7: supports D1 D2 [ 0.216687] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.216693] pci 0000:00:02.7: PME# disabled [ 0.216725] pci 0000:00:03.0: reg 10 32bit mmio: [0xeb004000-0xeb004fff] [ 0.216799] pci 0000:00:03.1: reg 10 32bit mmio: [0xeb000000-0xeb000fff] [ 0.216874] pci 0000:00:03.2: reg 10 32bit mmio: [0xeb001000-0xeb001fff] [ 0.216960] pci 0000:00:03.3: reg 10 32bit mmio: [0xeb002000-0xeb002fff] [ 0.217018] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.217025] pci 0000:00:03.3: PME# disabled [ 0.217077] pci 0000:00:04.0: reg 10 io port: [0xd800-0xd8ff] [ 0.217088] pci 0000:00:04.0: reg 14 32bit mmio: [0xeb003000-0xeb003fff] [ 0.217122] pci 0000:00:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.217149] pci 0000:00:04.0: supports D1 D2 [ 0.217153] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217160] pci 0000:00:04.0: PME# disabled [ 0.217204] pci 0000:00:05.0: reg 10 io port: [0xdc00-0xdc07] [ 0.217214] pci 0000:00:05.0: reg 14 io port: [0xe000-0xe003] [ 0.217224] pci 0000:00:05.0: reg 18 io port: [0xe400-0xe407] [ 0.217234] pci 0000:00:05.0: reg 1c io port: [0xe800-0xe803] [ 0.217244] pci 0000:00:05.0: reg 20 io port: [0xec00-0xec0f] [ 0.217285] pci 0000:00:05.0: PME# supported from D3cold [ 0.217292] pci 0000:00:05.0: PME# disabled [ 0.217356] pci 0000:00:0b.0: reg 10 32bit mmio: [0xeb005000-0xeb005fff] [ 0.217415] pci 0000:00:0b.0: supports D1 D2 [ 0.217419] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.217426] pci 0000:00:0b.0: PME# disabled [ 0.217519] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.217530] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] [ 0.217539] pci 0000:01:00.0: reg 18 32bit mmio: [0xe9000000-0xe900ffff] [ 0.217563] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.217592] pci 0000:01:00.0: supports D1 D2 [ 0.217643] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.217654] pci 0000:01:00.1: reg 14 32bit mmio: [0xe9010000-0xe901ffff] [ 0.217711] pci 0000:01:00.1: supports D1 D2 [ 0.217781] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.217794] pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe9ffffff] [ 0.217802] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xe7ffffff] [ 0.217815] pci_bus 0000:00: on NUMA node 0 [ 0.217824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.249547] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15) [ 0.249718] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15) [ 0.249882] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 14 15) [ 0.250069] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15) [ 0.250238] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 14 15) [ 0.250407] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 14 15) [ 0.250597] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 14 15) [ 0.250767] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 14 15) [ 0.250974] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.250981] vgaarb: loaded [ 0.251228] SCSI subsystem initialized [ 0.251380] libata version 3.00 loaded. [ 0.251509] usbcore: registered new interface driver usbfs [ 0.251533] usbcore: registered new interface driver hub [ 0.251582] usbcore: registered new device driver usb [ 0.251847] ACPI: WMI: Mapper loaded [ 0.251851] PCI: Using ACPI for IRQ routing [ 0.252125] NetLabel: Initializing [ 0.252130] NetLabel: domain hash size = 128 [ 0.252133] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.252159] NetLabel: unlabeled traffic allowed by default [ 0.252254] Switching to clocksource tsc [ 0.255531] AppArmor: AppArmor Filesystem Enabled [ 0.255562] pnp: PnP ACPI init [ 0.255618] ACPI: bus type pnp registered [ 0.260183] pnp: PnP ACPI: found 11 devices [ 0.260188] ACPI: ACPI bus type pnp unregistered [ 0.260196] PnPBIOS: Disabled by ACPI PNP [ 0.260217] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 0.260223] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.260229] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.260234] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.260240] system 00:00: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.260246] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.260252] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.260257] system 00:00: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.260263] system 00:00: iomem range 0xffee0000-0xffefffff has been reserved [ 0.260269] system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved [ 0.260274] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.260280] system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.260295] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.260300] system 00:02: ioport range 0x800-0x805 has been reserved [ 0.260306] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.295176] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.295183] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.295192] pci 0000:00:01.0: MEM window: 0xe8000000-0xe9ffffff [ 0.295200] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xe7ffffff [ 0.295221] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.295226] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.295231] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.295236] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe9ffffff] [ 0.295241] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xe7ffffff] [ 0.295312] NET: Registered protocol family 2 [ 0.295515] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.296144] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.296917] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.297432] TCP: Hash tables configured (established 131072 bind 65536) [ 0.297440] TCP reno registered [ 0.297674] NET: Registered protocol family 1 [ 0.379427] pci 0000:01:00.0: Boot video device [ 0.379746] cpufreq-nforce2: No nForce2 chipset. [ 0.379811] Scanning for low memory corruption every 60 seconds [ 0.380000] audit: initializing netlink socket (disabled) [ 0.380021] type=2000 audit(1278190923.379:1): initialized [ 0.391773] highmem bounce pool size: 64 pages [ 0.391784] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.394772] VFS: Disk quotas dquot_6.5.2 [ 0.394889] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.396107] fuse init (API version 7.13) [ 0.396285] msgmni has been set to 1690 [ 0.396698] alg: No test for stdrng (krng) [ 0.396808] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.396814] io scheduler noop registered [ 0.396817] io scheduler anticipatory registered [ 0.396821] io scheduler deadline registered [ 0.396902] io scheduler cfq registered (default) [ 0.397102] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.397154] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.397324] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.397331] ACPI: Power Button [PWRB] [ 0.397419] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.397429] ACPI: Sleep Button [FUTS] [ 0.397527] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.397533] ACPI: Power Button [PWRF] [ 0.397613] fan PNP0C0B:00: registered as cooling_device0 [ 0.397624] ACPI: Fan [FAN] (on) [ 0.398059] processor LNXCPU:00: registered as cooling_device1 [ 0.398128] processor LNXCPU:01: registered as cooling_device2 [ 0.401857] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.401873] ACPI: Thermal Zone [THRM] (36 C) [ 0.404849] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.404973] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.405540] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.407675] brd: module loaded [ 0.407808] isapnp: Scanning for PnP cards... [ 0.408535] loop: module loaded [ 0.408698] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.408901] pata_sis 0000:00:02.5: version 0.5.2 [ 0.408928] alloc irq_desc for 16 on node -1 [ 0.408932] alloc kstat_irqs on node -1 [ 0.408943] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.409183] scsi0 : pata_sis [ 0.409306] scsi1 : pata_sis [ 0.410575] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14 [ 0.410580] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15 [ 0.410637] alloc irq_desc for 17 on node -1 [ 0.410641] alloc kstat_irqs on node -1 [ 0.410648] pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.410702] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.411244] Fixed MDIO Bus: probed [ 0.411306] PPP generic driver version 2.4.2 [ 0.411395] tun: Universal TUN/TAP device driver, 1.6 [ 0.411399] tun: (C) 1999-2004 Max Krasnyansky [ 0.411544] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.411572] alloc irq_desc for 23 on node -1 [ 0.411575] alloc kstat_irqs on node -1 [ 0.411582] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.411603] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.411658] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.411694] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported [ 0.411713] ehci_hcd 0000:00:03.3: irq 23, io mem 0xeb002000 [ 0.423450] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.423637] usb usb1: configuration #1 chosen from 1 choice [ 0.423687] hub 1-0:1.0: USB hub found [ 0.423703] hub 1-0:1.0: 8 ports detected [ 0.423806] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.423837] alloc irq_desc for 20 on node -1 [ 0.423841] alloc kstat_irqs on node -1 [ 0.423850] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.423872] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.423943] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.423976] ohci_hcd 0000:00:03.0: irq 20, io mem 0xeb004000 [ 0.481827] usb usb2: configuration #1 chosen from 1 choice [ 0.481883] hub 2-0:1.0: USB hub found [ 0.481901] hub 2-0:1.0: 3 ports detected [ 0.481992] alloc irq_desc for 21 on node -1 [ 0.481996] alloc kstat_irqs on node -1 [ 0.482007] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.482032] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.482091] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.482123] ohci_hcd 0000:00:03.1: irq 21, io mem 0xeb000000 [ 0.511193] Freeing initrd memory: 7782k freed [ 0.537577] usb usb3: configuration #1 chosen from 1 choice [ 0.537638] hub 3-0:1.0: USB hub found [ 0.537657] hub 3-0:1.0: 3 ports detected [ 0.537749] alloc irq_desc for 22 on node -1 [ 0.537753] alloc kstat_irqs on node -1 [ 0.537763] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.537791] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 0.537856] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 0.537893] ohci_hcd 0000:00:03.2: irq 22, io mem 0xeb001000 [ 0.593471] usb usb4: configuration #1 chosen from 1 choice [ 0.593515] hub 4-0:1.0: USB hub found [ 0.593529] hub 4-0:1.0: 2 ports detected [ 0.593608] uhci_hcd: USB Universal Host Controller Interface driver [ 0.593758] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.593762] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.593906] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.594085] mice: PS/2 mouse device common for all mice [ 0.594292] rtc_cmos 00:04: RTC can wake from S4 [ 0.594363] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.594388] rtc0: alarms up to one year, 242 bytes nvram [ 0.594571] device-mapper: uevent: version 1.0.3 [ 0.594762] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.594873] device-mapper: multipath: version 1.1.0 loaded [ 0.594877] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.595075] EISA: Probing bus 0 at eisa.0 [ 0.595084] Cannot allocate resource for EISA slot 1 [ 0.595096] Cannot allocate resource for EISA slot 4 [ 0.595116] EISA: Detected 0 cards. [ 0.595233] cpuidle: using governor ladder [ 0.595236] cpuidle: using governor menu [ 0.596093] TCP cubic registered [ 0.596319] NET: Registered protocol family 10 [ 0.597155] lo: Disabled Privacy Extensions [ 0.597782] NET: Registered protocol family 17 [ 0.597861] Using IPI No-Shortcut mode [ 0.597984] PM: Resume from disk failed. [ 0.598005] registered taskstats version 1 [ 0.598305] Magic number: 2:420:44 [ 0.598404] rtc_cmos 00:04: setting system clock to 2010-07-03 21:02:04 UTC (1278190924) [ 0.598410] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.598412] EDD information not available. [ 0.613482] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.680153] ata1.00: ATA-7: Maxtor 6E040L0, NAR61HA0, max UDMA/133 [ 0.680158] ata1.00: 80293248 sectors, multi 16: LBA [ 0.715748] ata1.01: ATA-7: ST3160812A, 3.AAD, max UDMA/100 [ 0.715753] ata1.01: 312581808 sectors, multi 16: LBA48 [ 0.731860] ata1.00: configured for UDMA/133 [ 0.735354] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.761478] isapnp: No Plug & Play device found [ 0.790651] ata1.01: configured for UDMA/100 [ 0.790804] scsi 0:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5 [ 0.790978] sd 0:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB) [ 0.791026] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.791064] sd 0:0:0:0: [sda] Write Protect is off [ 0.791070] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.791118] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.791237] scsi 0:0:1:0: Direct-Access ATA ST3160812A 3.AA PQ: 0 ANSI: 5 [ 0.791379] sda: [ 0.791467] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.868316] usb 1-1: configuration #1 chosen from 1 choice [ 0.963694] ata2.00: ATAPI: GO-D1600D, VER 0I59, max UDMA/33 [ 0.963736] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33 [ 0.979741] ata2.00: configured for UDMA/33 [ 0.995718] ata2.01: configured for UDMA/33 [ 0.998291] scsi 1:0:0:0: CD-ROM DVDROM GO-D1600D 0I59 PQ: 0 ANSI: 5 [ 0.999992] sr0: scsi3-mmc drive: 16x/48x cd/rw xa/form2 cdda tray [ 0.999996] Uniform CD-ROM driver Revision: 3.20 [ 1.000116] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.000180] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.003945] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5 [ 1.015464] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.015567] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.015627] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.091349] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 1.222731] usb 1-6: configuration #1 chosen from 1 choice [ 1.584016] usb 3-3: new low speed USB device using ohci_hcd and address 2 [ 1.796130] usb 3-3: configuration #1 chosen from 1 choice [ 2.104016] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 2.326270] usb 2-2: configuration #1 chosen from 1 choice [ 2.895505] sd 0:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.895582] sd 0:0:1:0: [sdb] Write Protect is off [ 2.895586] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.895621] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.895812] sdb: sda1 sda2 < sdb1 [ 2.941544] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.941555] sda5 > [ 2.941882] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.941900] Freeing unused kernel memory: 660k freed [ 2.942528] Write protecting the kernel text: 4680k [ 2.942581] Write protecting the kernel read-only data: 1840k [ 2.968141] udev: starting version 151 [ 3.210285] sata_sis 0000:00:05.0: version 1.0 [ 3.210325] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.210338] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode [ 3.220041] scsi2 : sata_sis [ 3.224068] scsi3 : sata_sis [ 3.224180] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xe000 bmdma 0xec00 irq 17 [ 3.224188] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe800 bmdma 0xec08 irq 17 [ 3.224720] Initializing USB Mass Storage driver... [ 3.224902] scsi4 : SCSI emulation for USB Mass Storage devices [ 3.225383] usb-storage: device found at 2 [ 3.225387] usb-storage: waiting for device to settle before scanning [ 3.225435] scsi5 : SCSI emulation for USB Mass Storage devices [ 3.225687] usbcore: registered new interface driver usb-storage [ 3.225693] USB Mass Storage support registered. [ 3.225839] usb-storage: device found at 4 [ 3.225843] usb-storage: waiting for device to settle before scanning [ 3.228352] FDC 0 is a post-1991 82077 [ 3.233775] sis900.c: v1.08.10 Apr. 2 2006 [ 3.233833] alloc irq_desc for 19 on node -1 [ 3.233837] alloc kstat_irqs on node -1 [ 3.233848] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.234897] 0000:00:04.0: Unknown PHY transceiver found at address 0. [ 3.235632] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 3.236392] 0000:00:04.0: Unknown PHY transceiver found at address 2. [ 3.237151] 0000:00:04.0: Unknown PHY transceiver found at address 3. [ 3.237891] 0000:00:04.0: Unknown PHY transceiver found at address 4. [ 3.238551] 0000:00:04.0: Unknown PHY transceiver found at address 5. [ 3.239247] 0000:00:04.0: Unknown PHY transceiver found at address 6. [ 3.239894] 0000:00:04.0: Unknown PHY transceiver found at address 7. [ 3.240545] 0000:00:04.0: Unknown PHY transceiver found at address 8. [ 3.241203] 0000:00:04.0: Unknown PHY transceiver found at address 9. [ 3.241849] 0000:00:04.0: Unknown PHY transceiver found at address 10. [ 3.242494] 0000:00:04.0: Unknown PHY transceiver found at address 11. [ 3.243140] 0000:00:04.0: Unknown PHY transceiver found at address 12. [ 3.243785] 0000:00:04.0: Unknown PHY transceiver found at address 13. [ 3.244432] 0000:00:04.0: Unknown PHY transceiver found at address 14. [ 3.245086] 0000:00:04.0: Unknown PHY transceiver found at address 15. [ 3.245732] 0000:00:04.0: Unknown PHY transceiver found at address 16. [ 3.246378] 0000:00:04.0: Unknown PHY transceiver found at address 17. [ 3.247129] 0000:00:04.0: Unknown PHY transceiver found at address 18. [ 3.247892] 0000:00:04.0: Unknown PHY transceiver found at address 19. [ 3.248654] 0000:00:04.0: Unknown PHY transceiver found at address 20. [ 3.249414] 0000:00:04.0: Unknown PHY transceiver found at address 21. [ 3.250131] 0000:00:04.0: Unknown PHY transceiver found at address 22. [ 3.251753] 0000:00:04.0: Unknown PHY transceiver found at address 23. [ 3.252523] 0000:00:04.0: Unknown PHY transceiver found at address 24. [ 3.253345] 0000:00:04.0: Unknown PHY transceiver found at address 25. [ 3.254494] 0000:00:04.0: Unknown PHY transceiver found at address 27. [ 3.255252] 0000:00:04.0: Unknown PHY transceiver found at address 28. [ 3.255946] 0000:00:04.0: Unknown PHY transceiver found at address 29. [ 3.256601] 0000:00:04.0: Unknown PHY transceiver found at address 30. [ 3.257259] 0000:00:04.0: Unknown PHY transceiver found at address 31. [ 3.277151] 0000:00:04.0: Using transceiver found at address 1 as default [ 3.278809] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:11:5b:15:60:74 [ 3.278859] ohci1394 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.334029] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[eb005000-eb0057ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 3.507137] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.507144] EXT4-fs (sda1): write access will be enabled during recovery [ 3.554751] ata3: SATA link down (SStatus 0 SControl 300) [ 3.585755] EXT4-fs (sda1): recovery complete [ 3.587216] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.882748] ata4: SATA link down (SStatus 0 SControl 300) [ 4.616173] ieee1394: Host added: ID:BUS[0-00:1023] GUID[30bd0502000011de] [ 8.224350] usb-storage: device scan complete [ 8.224682] usb-storage: device scan complete [ 8.224819] scsi 4:0:0:0: Direct-Access HP Photosmart D5300 1.00 PQ: 0 ANSI: 5 [ 8.225318] scsi 5:0:0:0: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 [ 8.225557] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 8.226059] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 8.227035] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 8.227653] sd 5:0:0:0: [sdd] Attached SCSI removable disk [ 14.532570] Adding 2241028k swap on /dev/sda5. Priority:-1 extents:1 across:2241028k [ 14.555917] udev: starting version 151 [ 15.020220] type=1505 audit(1278190938.917:2): operation="profile_load" pid=515 name="/sbin/dhclient3" [ 15.021016] type=1505 audit(1278190938.922:3): operation="profile_load" pid=515 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.021472] type=1505 audit(1278190938.922:4): operation="profile_load" pid=515 name="/usr/lib/connman/scripts/dhclient-script" [ 15.397920] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.410271] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6811 [ 15.410318] usbcore: registered new interface driver usblp [ 15.636787] Linux agpgart interface v0.103 [ 15.749876] usbcore: registered new interface driver usbserial [ 15.750347] USB Serial support registered for generic [ 15.750591] usbcore: registered new interface driver usbserial_generic [ 15.750596] usbserial: USB Serial Driver core [ 15.790737] usbcore: registered new interface driver hiddev [ 15.791252] usbcore: registered new interface driver usbhid [ 15.791259] usbhid: v2.6:USB HID core driver [ 15.870759] lp: driver loaded but no devices found [ 15.890038] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648] [ 15.898368] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 15.934609] parport_pc 00:09: reported by Plug and Play ACPI [ 15.934697] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 15.986092] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-3/3-3:1.0/input/input5 [ 15.986707] a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:03.1-3/input0 [ 16.026450] USB Serial support registered for GSM modem (1-port) [ 16.026882] option 1-6:1.0: GSM modem (1-port) converter detected [ 16.027179] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0 [ 16.027222] option 1-6:1.1: GSM modem (1-port) converter detected [ 16.027426] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1 [ 16.027469] option 1-6:1.3: GSM modem (1-port) converter detected [ 16.027725] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2 [ 16.027762] option 1-6:1.4: GSM modem (1-port) converter detected [ 16.028244] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB3 [ 16.028336] usbcore: registered new interface driver option [ 16.028340] option: v0.7.2:USB Driver for GSM modems [ 16.033820] lp0: using parport0 (interrupt-driven). [ 16.037611] ppdev: user-space parallel port driver [ 16.185051] [drm] Initialized drm 1.1.0 20060810 [ 16.586827] [drm] radeon defaulting to kernel modesetting. [ 16.586834] [drm] radeon kernel modesetting enabled. [ 16.586911] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.589774] [drm] radeon: Initializing kernel modesetting. [ 16.589913] [drm] register mmio base: 0xE9000000 [ 16.589917] [drm] register mmio size: 65536 [ 16.590230] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 16.590248] [drm] Generation 1 PCI interface in multifunction mode [ 16.590252] [drm] Limiting VRAM to one aperture [ 16.590262] agpgart-sis 0000:00:00.0: AGP 3.5 bridge [ 16.590287] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 16x mode [ 16.590294] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover [ 16.605080] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 16x mode [ 16.605091] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.1 into 16x mode [ 16.605100] [drm] radeon: VRAM 128M [ 16.605103] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 16.605105] [drm] radeon: GTT 128M [ 16.605108] [drm] radeon: GTT from 0xD0000000 to 0xD7FFFFFF [ 16.605153] [drm] radeon: irq initialized. [ 16.605554] [drm] Detected VRAM RAM=128M, BAR=128M [ 16.605560] [drm] RAM width 128bits DDR [ 16.605682] [TTM] Zone kernel: Available graphics memory: 436926 kiB. [ 16.605685] [TTM] Zone highmem: Available graphics memory: 1030818 kiB. [ 16.605707] [drm] radeon: 128M of VRAM memory ready [ 16.605710] [drm] radeon: 128M of GTT memory ready. [ 16.605948] [drm] radeon: cp idle (0x02000603) [ 16.606005] [drm] Loading R200 Microcode [ 16.606011] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 16.843782] [drm] radeon: ring at 0x00000000D0000000 [ 16.843804] [drm] ring test succeeded in 1 usecs [ 16.851084] [drm] radeon: ib pool ready. [ 16.851211] [drm] ib test succeeded in 0 usecs [ 16.852005] [drm] Default TV standard: PAL [ 16.852011] [drm] 27.000000000 MHz TV ref clk [ 16.852015] [drm] No TV DAC info found in BIOS [ 16.852021] [drm] DFP table revision: 3 [ 16.852727] [drm] Default TV standard: PAL [ 16.852732] [drm] 27.000000000 MHz TV ref clk [ 16.852962] [drm] Radeon Display Connectors [ 16.852967] [drm] Connector 0: [ 16.852971] [drm] VGA [ 16.852975] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 16.852978] [drm] Encoders: [ 16.852982] [drm] CRT1: INTERNAL_DAC1 [ 16.852985] [drm] Connector 1: [ 16.852987] [drm] DVI-I [ 16.852990] [drm] HPD1 [ 16.852994] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 16.853027] [drm] Encoders: [ 16.853031] [drm] CRT2: INTERNAL_DAC2 [ 16.853034] [drm] DFP1: INTERNAL_TMDS1 [ 16.853038] [drm] Connector 2: [ 16.853041] [drm] S-video [ 16.853044] [drm] Encoders: [ 16.853048] [drm] TV1: INTERNAL_DAC2 [ 16.997862] [drm] fb mappable at 0xD8040000 [ 16.997868] [drm] vram apper at 0xD8000000 [ 16.997872] [drm] size 5242880 [ 16.997876] [drm] fb depth is 24 [ 16.997879] [drm] pitch is 5120 [ 16.998248] fb0: radeondrmfb frame buffer device [ 16.998253] registered panic notifier [ 16.998267] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 17.066872] vga16fb: initializing [ 17.066881] vga16fb: mapped to 0xc00a0000 [ 17.066889] vga16fb: not registering due to another framebuffer present [ 17.416606] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 17.447197] Console: switching to colour frame buffer device 160x64 [ 17.551176] alloc irq_desc for 18 on node -1 [ 17.551181] alloc kstat_irqs on node -1 [ 17.551196] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 17.872026] intel8x0_measure_ac97_clock: measured 53864 usecs (2592 samples) [ 17.872031] intel8x0: clocking to 48000 [ 18.389335] eth0: Media Link Off [ 18.389862] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.412707] type=1505 audit(1278190942.313:5): operation="profile_load" pid=817 name="/usr/share/gdm/guest-session/Xsession" [ 18.416481] type=1505 audit(1278190942.317:6): operation="profile_replace" pid=819 name="/sbin/dhclient3" [ 18.417380] type=1505 audit(1278190942.317:7): operation="profile_replace" pid=819 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 18.417805] type=1505 audit(1278190942.317:8): operation="profile_replace" pid=819 name="/usr/lib/connman/scripts/dhclient-script" [ 18.430341] type=1505 audit(1278190942.329:9): operation="profile_load" pid=821 name="/usr/bin/evince" [ 18.445206] type=1505 audit(1278190942.345:10): operation="profile_load" pid=821 name="/usr/bin/evince-previewer" [ 18.454363] type=1505 audit(1278190942.353:11): operation="profile_load" pid=821 name="/usr/bin/evince-thumbnailer" [ 19.291954] CPU0 attaching NULL sched-domain. [ 19.291966] CPU1 attaching NULL sched-domain. [ 19.313085] CPU0 attaching sched-domain: [ 19.313091] domain 0: span 0-1 level SIBLING [ 19.313095] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 19.313103] domain 1: span 0-1 level MC [ 19.313106] groups: 0-1 (cpu_power = 1178) [ 19.313114] CPU1 attaching sched-domain: [ 19.313117] domain 0: span 0-1 level SIBLING [ 19.313120] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 19.313127] domain 1: span 0-1 level MC [ 19.313130] groups: 0-1 (cpu_power = 1178) [ 20.075173] __ratelimit: 9 callbacks suppressed [ 20.075180] type=1503 audit(1278190943.974:15): operation="open" pid=1168 parent=1166 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0" [ 20.075222] type=1503 audit(1278190943.974:16): operation="open" pid=1168 parent=1166 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB1" [ 20.075262] type=1503 audit(1278190943.974:17): operation="open" pid=1168 parent=1166 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB2" [ 20.075299] type=1503 audit(1278190943.974:18): operation="open" pid=1168 parent=1166 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB3" [ 20.080789] usb 1-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 22.489340] CPU0 attaching NULL sched-domain. [ 22.489352] CPU1 attaching NULL sched-domain. [ 22.508125] CPU0 attaching sched-domain: [ 22.508133] domain 0: span 0-1 level SIBLING [ 22.508139] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 22.508151] domain 1: span 0-1 level MC [ 22.508156] groups: 0-1 (cpu_power = 1178) [ 22.508167] CPU1 attaching sched-domain: [ 22.508171] domain 0: span 0-1 level SIBLING [ 22.508175] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 22.508185] domain 1: span 0-1 level MC [ 22.508189] groups: 0-1 (cpu_power = 1178) [ 27.449492] PPP BSD Compression module registered [ 27.476202] PPP Deflate Compression module registered [19695.385187] type=1505 audit(1278210618.040:19): operation="profile_replace" pid=3662 name="/usr/bin/evince" [19695.387223] type=1505 audit(1278210618.040:20): operation="profile_replace" pid=3662 name="/usr/bin/evince-previewer" [19695.388920] type=1505 audit(1278210618.044:21): operation="profile_replace" pid=3662 name="/usr/bin/evince-thumbnailer" [20434.688899] Xorg[934]: segfault at c ip 0044a8da sp bfbd109c error 4 in libc-2.11.1.so[3df000+153000] [22206.517896] yelp[5422]: segfault at ff0 ip 0681f8a1 sp bf82e0f0 error 4 in libmozjs.so[67ca000+14b000] [24333.648825] yelp[7193]: segfault at ff0 ip 0380c8a1 sp bfb0e320 error 4 in libmozjs.so[37b7000+14b000] [24354.419486] yelp[7200]: segfault at ff0 ip 0115b8a1 sp bf9b8340 error 4 in libmozjs.so[1106000+14b000] [24386.958985] yelp[7206]: segfault at ff0 ip 07acc8a1 sp bf983a30 error 4 in libmozjs.so[7a77000+14b000]