[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-9-rt (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #152-Ubuntu SMP PREEMPT RT Thu Oct 15 05:01:14 UTC 2009 (Ubuntu 2.6.31-9.152-rt) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe5a800 (usable) [ 0.000000] BIOS-e820: 00000000dfe5a800 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100002000 - 0000000120000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xdfe5a max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfe5a800 (usable) [ 0.000000] modified: 00000000dfe5a800 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100002000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3786c000 - 37fefaf2 [ 0.000000] Allocated new RAMDISK: 008d7000 - 0105aaf2 [ 0.000000] Move RAMDISK from 000000003786c000 - 0000000037fefaf1 to 008d7000 - 0105aaf1 [ 0.000000] ACPI: RSDP 000fbb10 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT dfe5d200 0006C (v01 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: FACP dfe5d09c 000F4 (v04 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: DSDT dfe5d800 06114 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS dfe6c000 00040 [ 0.000000] ACPI: HPET dfe5d300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC dfe5d400 00068 (v01 DELL M08 27D80B18 ASL 00000047) [ 0.000000] ACPI: ASF! dfe5d000 0007E (v32 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: MCFG dfe5d3c0 0003E (v16 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: TCPA dfe5d700 00032 (v01 00000000 ASL 00000000) [ 0.000000] ACPI: SLIC dfe5d49c 00176 (v01 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: BOOT dfe5cfc0 00028 (v01 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: SSDT dfe5b9c4 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2694MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d26ac] TEXT DATA BSS ==> [0000100000 - 00008d26ac] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008d3000 - 00008d6188] BRK ==> [00008d3000 - 00008d6188] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008d7000 - 000105aaf2] NEW RAMDISK ==> [00008d7000 - 000105aaf2] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000dfe5a [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfe5a [ 0.000000] On node 0 totalpages: 916981 [ 0.000000] free_area_init_node: node 0, pgdat c07a87c0, node_mem_map c105b000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5389 pages used for memmap [ 0.000000] HighMem zone: 684367 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages at c2c89000, static data 32196 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909816 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-9-rt root=UUID=24e105f5-a650-48a0-8645-8fffe413b77e ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 44019936 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000dfe5a) [ 0.000000] Memory: 3578548k/3668328k available (4616k kernel code, 88496k reserved, 2237k data, 516k init, 2759024k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07b2000 - 0xc0833000 ( 516 kB) [ 0.000000] .data : 0xc0582222 - 0xc07b19c8 (2237 kB) [ 0.000000] .text : 0xc0100000 - 0xc0582222 (4616 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Preemptible RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.653 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.30 BogoMIPS (lpj=1994653) [ 0.000999] Security Framework initialized [ 0.000999] AppArmor: AppArmor initialized [ 0.000999] Mount-cache hash table entries: 512 [ 0.000999] Initializing cgroup subsys ns [ 0.000999] Initializing cgroup subsys cpuacct [ 0.000999] Initializing cgroup subsys memory [ 0.000999] Initializing cgroup subsys freezer [ 0.000999] Initializing cgroup subsys net_cls [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.000999] CPU0: Thermal monitoring enabled (TM2) [ 0.000999] using mwait in idle threads. [ 0.000999] Performance Counters: Core2 events, Intel PMU driver. [ 0.000999] ... version: 2 [ 0.000999] ... bit width: 40 [ 0.000999] ... generic counters: 2 [ 0.000999] ... value mask: 000000ffffffffff [ 0.000999] ... max period: 000000007fffffff [ 0.000999] ... fixed-purpose counters: 3 [ 0.000999] ... counter mask: 0000000700000003 [ 0.000999] Checking 'hlt' instruction... OK. [ 0.005003] ACPI: Core revision 20090521 [ 0.015444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.025898] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 0.025999] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.025999] Initializing CPU#1 [ 0.025999] Calibrating delay using timer specific routine.. 3988.52 BogoMIPS (lpj=1994262) [ 0.025999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.025999] CPU: L2 cache: 2048K [ 0.025999] CPU: Physical Processor ID: 0 [ 0.025999] CPU: Processor Core ID: 1 [ 0.025999] mce: CPU supports 6 MCE banks [ 0.025999] CPU1: Thermal monitoring enabled (TM2) [ 0.025999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.097429] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 0.097445] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.098054] Brought up 2 CPUs [ 0.098057] Total of 2 processors activated (7977.83 BogoMIPS). [ 0.098110] CPU0 attaching sched-domain: [ 0.098113] domain 0: span 0-1 level MC [ 0.098115] groups: 0 1 [ 0.098121] CPU1 attaching sched-domain: [ 0.098123] domain 0: span 0-1 level MC [ 0.098125] groups: 1 0 [ 0.099042] Booting paravirtualized kernel on bare hardware [ 0.099193] regulator: core version 0.5 [ 0.099193] Time: 15:18:12 Date: 02/24/10 [ 0.099193] NET: Registered protocol family 16 [ 0.099193] EISA bus registered [ 0.099193] ACPI: bus type pci registered [ 0.100053] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.100053] PCI: MCFG area at f8000000 reserved in E820 [ 0.100053] PCI: Using MMCONFIG for extended config space [ 0.100053] PCI: Using configuration type 1 for base access [ 0.109060] bio: create slab at 0 [ 0.114033] ACPI: EC: Look up EC in DSDT [ 0.114123] ACPI: BIOS _OSI(Linux) query ignored [ 0.149466] ACPI: SSDT dfe6c080 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624) [ 0.166430] ACPI: Interpreter enabled [ 0.166436] ACPI: (supports S0 S3 S4 S5) [ 0.169385] ACPI: Using IOAPIC for interrupt routing [ 0.267303] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.284579] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.285098] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.285102] pci 0000:00:01.0: PME# disabled [ 0.285202] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] [ 0.285274] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] [ 0.285354] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] [ 0.285354] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.285354] pci 0000:00:1a.7: PME# disabled [ 0.285354] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff] [ 0.285354] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.285354] pci 0000:00:1b.0: PME# disabled [ 0.285354] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.285354] pci 0000:00:1c.0: PME# disabled [ 0.285413] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.285418] pci 0000:00:1c.1: PME# disabled [ 0.285524] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.285529] pci 0000:00:1c.5: PME# disabled [ 0.285599] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] [ 0.285672] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] [ 0.285743] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] [ 0.285821] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] [ 0.285891] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.285897] pci 0000:00:1d.7: PME# disabled [ 0.286090] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.286095] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.286099] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.286106] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.286166] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.286174] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.286183] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.286192] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.286201] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] [ 0.286264] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] [ 0.286273] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] [ 0.286281] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] [ 0.286290] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] [ 0.286299] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eef] [ 0.286307] pci 0000:00:1f.2: reg 24 io port: [0xeff0-0xefff] [ 0.286341] pci 0000:00:1f.2: PME# supported from D3hot [ 0.286346] pci 0000:00:1f.2: PME# disabled [ 0.286376] pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffbf00-0xf6ffbfff] [ 0.286404] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] [ 0.286490] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff] [ 0.286506] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.286523] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff] [ 0.286533] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f] [ 0.286543] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.286662] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.286666] pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff] [ 0.286672] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.286936] pci 0000:0c:00.0: reg 10 32bit mmio: [0xf1fff000-0xf1ffffff] [ 0.287194] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.287207] pci 0000:0c:00.0: PME# disabled [ 0.287332] pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff] [ 0.287436] pci 0000:09:00.0: reg 10 64bit mmio: [0xf1ef0000-0xf1efffff] [ 0.287550] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 0.287557] pci 0000:09:00.0: PME# disabled [ 0.287644] pci 0000:00:1c.5: bridge 32bit mmio: [0xf1e00000-0xf1efffff] [ 0.287706] pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.287737] pci 0000:03:01.0: supports D1 D2 [ 0.287739] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.287745] pci 0000:03:01.0: PME# disabled [ 0.287799] pci 0000:03:01.4: reg 10 32bit mmio: [0xf1cff000-0xf1cfffff] [ 0.287808] pci 0000:03:01.4: reg 14 32bit mmio: [0xf1cfe800-0xf1cfefff] [ 0.287865] pci 0000:03:01.4: supports D1 D2 [ 0.287867] pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.287872] pci 0000:03:01.4: PME# disabled [ 0.287935] pci 0000:03:08.0: reg 10 32bit mmio: [0xf0000000-0xf0ffffff] [ 0.287944] pci 0000:03:08.0: reg 14 32bit mmio: [0x000000-0x7ffffff] [ 0.287978] pci 0000:03:08.0: reg 30 32bit mmio: [0xf1d00000-0xf1d1ffff] [ 0.288062] pci 0000:00:1e.0: transparent bridge [ 0.288071] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0000000-0xf1dfffff] [ 0.288134] pci_bus 0000:00: on NUMA node 0 [ 0.288139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.288509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.288672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.288748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.288837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.288935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.326134] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5 [ 0.326249] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 [ 0.327146] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11) [ 0.327280] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 0.327417] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.327555] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.327694] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.327814] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.328126] SCSI subsystem initialized [ 0.332011] libata version 3.00 loaded. [ 0.332052] usbcore: registered new interface driver usbfs [ 0.332052] usbcore: registered new interface driver hub [ 0.332052] usbcore: registered new device driver usb [ 0.333196] ACPI: WMI: Mapper loaded [ 0.333199] PCI: Using ACPI for IRQ routing [ 0.341029] Bluetooth: Core ver 2.15 [ 0.341035] NET: Registered protocol family 31 [ 0.341035] Bluetooth: HCI device and connection manager initialized [ 0.341035] Bluetooth: HCI socket layer initialized [ 0.341035] NetLabel: Initializing [ 0.341035] NetLabel: domain hash size = 128 [ 0.341035] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.341044] NetLabel: unlabeled traffic allowed by default [ 0.341064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.341064] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.353491] pnp: PnP ACPI init [ 0.353502] ACPI: bus type pnp registered [ 0.419468] pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.419472] pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.419607] pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.419611] pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.419614] pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.419618] pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.442004] pnp 00:0d: mem resource (0xdff00000-0xe06fffff) overlaps 0000:00:01.0 BAR 15 (0xe0000000-0xefffffff), disabling [ 0.442034] pnp 00:0d: mem resource (0xdff00000-0xe06fffff) overlaps 0000:01:00.0 BAR 1 (0xe0000000-0xefffffff), disabling [ 0.442051] pnp 00:0d: mem resource (0x0-0x9efff) overlaps 0000:03:08.0 BAR 1 (0x0-0x7ffffff), disabling [ 0.442054] pnp 00:0d: mem resource (0x9f000-0x9ffff) overlaps 0000:03:08.0 BAR 1 (0x0-0x7ffffff), disabling [ 0.442058] pnp 00:0d: mem resource (0xc0000-0xcffff) overlaps 0000:03:08.0 BAR 1 (0x0-0x7ffffff), disabling [ 0.442061] pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:03:08.0 BAR 1 (0x0-0x7ffffff), disabling [ 0.442065] pnp 00:0d: mem resource (0x100000-0xdfe5a7ff) overlaps 0000:03:08.0 BAR 1 (0x0-0x7ffffff), disabling [ 0.442250] pnp: PnP ACPI: found 14 devices [ 0.442252] ACPI: ACPI bus type pnp unregistered [ 0.442256] PnPBIOS: Disabled by ACPI PNP [ 0.442268] system 00:05: ioport range 0xc80-0xcaf has been reserved [ 0.442271] system 00:05: ioport range 0xcc0-0xcff could not be reserved [ 0.442279] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.442286] system 00:0a: ioport range 0xcb0-0xcbb has been reserved [ 0.442289] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.442296] system 00:0b: ioport range 0x900-0x97f has been reserved [ 0.442299] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 0.442306] system 00:0c: ioport range 0xf400-0xf4fe has been reserved [ 0.442309] system 00:0c: ioport range 0x1080-0x10bf has been reserved [ 0.442312] system 00:0c: ioport range 0x10c0-0x10df has been reserved [ 0.442315] system 00:0c: ioport range 0x809-0x809 has been reserved [ 0.442321] system 00:0d: iomem range 0xdfe5a800-0xdfefffff has been reserved [ 0.442324] system 00:0d: iomem range 0xdff00000-0xdfffffff has been reserved [ 0.442328] system 00:0d: iomem range 0xffe00000-0xffffffff has been reserved [ 0.442331] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved [ 0.442334] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.442337] system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.442340] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.442343] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.442346] system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved [ 0.442349] system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved [ 0.442352] system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved [ 0.442355] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved [ 0.442358] system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved [ 0.442360] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.477444] AppArmor: AppArmor Filesystem Enabled [ 0.477484] pci 0000:03:08.0: BAR 6: address space collision on of device [0xf1d00000-0xf1d1ffff] [ 0.477544] pci 0000:00:1e.0: BAR 15: can't allocate mem resource [0x000000-0xdffffff] [ 0.477550] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.477553] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.477557] pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff [ 0.477561] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.477566] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b [ 0.477568] pci 0000:00:1c.0: IO window: disabled [ 0.477575] pci 0000:00:1c.0: MEM window: disabled [ 0.477580] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.477585] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c [ 0.477587] pci 0000:00:1c.1: IO window: disabled [ 0.477594] pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff [ 0.477599] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.477605] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 [ 0.477607] pci 0000:00:1c.5: IO window: disabled [ 0.477614] pci 0000:00:1c.5: MEM window: 0xf1e00000-0xf1efffff [ 0.477619] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.477627] pci 0000:03:08.0: BAR 1: can't allocate mem resource [0x000000-0x7ffffff] [ 0.477631] pci 0000:03:01.0: BAR 15: can't allocate mem resource [0x000000-0x3ffffff] [ 0.477635] pci 0000:03:01.0: BAR 16: can't allocate mem resource [0x000000-0x3ffffff] [ 0.477643] pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04 [ 0.477646] pci 0000:03:01.0: IO window: 0x002000-0x0020ff [ 0.477651] pci 0000:03:01.0: IO window: 0x002400-0x0024ff [ 0.477657] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.477661] pci 0000:00:1e.0: IO window: 0x2000-0x2fff [ 0.477668] pci 0000:00:1e.0: MEM window: 0xf0000000-0xf1dfffff [ 0.477673] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.477687] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.477692] pci 0000:00:01.0: setting latency timer to 64 [ 0.477701] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.477707] pci 0000:00:1c.0: setting latency timer to 64 [ 0.477717] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.477723] pci 0000:00:1c.1: setting latency timer to 64 [ 0.477733] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.477738] pci 0000:00:1c.5: setting latency timer to 64 [ 0.477747] pci 0000:00:1e.0: setting latency timer to 64 [ 0.477757] pci 0000:03:01.0: enabling device (0000 -> 0003) [ 0.477763] pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.477772] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.477775] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.477778] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.477780] pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff] [ 0.477783] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.477786] pci_bus 0000:0c: resource 1 mem: [0xf1f00000-0xf1ffffff] [ 0.477788] pci_bus 0000:09: resource 1 mem: [0xf1e00000-0xf1efffff] [ 0.477791] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] [ 0.477793] pci_bus 0000:03: resource 1 mem: [0xf0000000-0xf1dfffff] [ 0.477796] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.477798] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.477801] pci_bus 0000:04: resource 0 io: [0x2000-0x20ff] [ 0.477803] pci_bus 0000:04: resource 1 io: [0x2400-0x24ff] [ 0.477858] NET: Registered protocol family 2 [ 0.477966] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.478316] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.478736] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 0.479632] TCP: Hash tables configured (established 131072 bind 65536) [ 0.479636] TCP reno registered [ 0.479780] NET: Registered protocol family 1 [ 0.479856] Trying to unpack rootfs image as initramfs... [ 0.683679] Freeing initrd memory: 7694k freed [ 0.687873] Simple Boot Flag at 0x79 set to 0x1 [ 0.688552] cpufreq-nforce2: No nForce2 chipset. [ 0.688686] Scanning for low memory corruption every 60 seconds [ 0.689015] audit: initializing netlink socket (disabled) [ 0.689037] type=2000 audit(1267024692.687:1): initialized [ 0.692876] highmem bounce pool size: 64 pages [ 0.692881] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.692977] VFS: Disk quotas dquot_6.5.2 [ 0.693012] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.693323] fuse init (API version 7.12) [ 0.693390] msgmni has been set to 1617 [ 0.693579] alg: No test for stdrng (krng) [ 0.693593] io scheduler noop registered [ 0.693595] io scheduler anticipatory registered [ 0.693597] io scheduler deadline registered [ 0.693611] io scheduler cfq registered (default) [ 0.693785] pci 0000:01:00.0: Boot video device [ 0.693980] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.693987] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.694236] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.694248] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.694555] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.694567] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.694843] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.694855] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.695145] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.695380] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.695739] ACPI: AC Adapter [AC] (on-line) [ 0.695925] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.696471] ACPI: Lid Switch [LID] [ 0.696557] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.696564] ACPI: Power Button [PBTN] [ 0.696651] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.696655] ACPI: Sleep Button [SBTN] [ 0.697496] ACPI: SSDT dfe5c4fa 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.698013] ACPI: SSDT dfe5be90 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.698376] Monitor-Mwait will be used to enter C-1 state [ 0.698407] Monitor-Mwait will be used to enter C-2 state [ 0.698436] Monitor-Mwait will be used to enter C-3 state [ 0.698446] Marking TSC unstable due to TSC halts in idle [ 0.698500] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.698562] processor LNXCPU:00: registered as cooling_device0 [ 0.698566] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.698969] ACPI: SSDT dfe5c780 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.699310] ACPI: SSDT dfe5c475 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.699824] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.699882] processor LNXCPU:01: registered as cooling_device1 [ 0.699886] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.755794] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.755804] ACPI: Thermal Zone [THM] (66 C) [ 0.756082] isapnp: Scanning for PnP cards... [ 0.800315] ACPI: Battery Slot [BAT0] (battery present) [ 0.840414] ACPI: Battery Slot [BAT1] (battery present) [ 1.142414] isapnp: No Plug & Play device found [ 1.146210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.149175] brd: module loaded [ 1.150334] loop: module loaded [ 1.150533] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.150876] ata_piix 0000:00:1f.1: version 2.13 [ 1.150890] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.150934] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.151120] scsi0 : ata_piix [ 1.151296] scsi1 : ata_piix [ 1.153779] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 1.153783] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 1.153809] ata_piix 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.153815] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.154042] ata2: port disabled. ignoring. [ 1.304288] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.304366] scsi2 : ata_piix [ 1.304508] scsi3 : ata_piix [ 1.306928] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 18 [ 1.306936] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 18 [ 1.310789] Fixed MDIO Bus: probed [ 1.310956] PPP generic driver version 2.4.2 [ 1.311213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.311239] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.311272] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.311276] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.311367] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.315341] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.315348] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.315389] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 1.325267] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.325394] usb usb1: configuration #1 chosen from 1 choice [ 1.325465] hub 1-0:1.0: USB hub found [ 1.325473] hub 1-0:1.0: 4 ports detected [ 1.325539] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.325551] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.325554] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.325629] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.329529] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.329536] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.329571] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 1.339269] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.339376] usb usb2: configuration #1 chosen from 1 choice [ 1.339445] hub 2-0:1.0: USB hub found [ 1.339452] hub 2-0:1.0: 6 ports detected [ 1.339564] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.339624] uhci_hcd: USB Universal Host Controller Interface driver [ 1.339651] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.339659] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.339663] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.339736] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.339784] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 1.339908] usb usb3: configuration #1 chosen from 1 choice [ 1.339977] hub 3-0:1.0: USB hub found [ 1.339984] hub 3-0:1.0: 2 ports detected [ 1.340041] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.340048] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.340051] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.340125] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.340188] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 1.340333] usb usb4: configuration #1 chosen from 1 choice [ 1.340398] hub 4-0:1.0: USB hub found [ 1.340405] hub 4-0:1.0: 2 ports detected [ 1.340459] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.340466] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.340470] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.340540] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.340590] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 1.340710] usb usb5: configuration #1 chosen from 1 choice [ 1.340775] hub 5-0:1.0: USB hub found [ 1.340781] hub 5-0:1.0: 2 ports detected [ 1.340837] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.340844] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.340848] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.340922] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.340971] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 1.341092] usb usb6: configuration #1 chosen from 1 choice [ 1.341156] hub 6-0:1.0: USB hub found [ 1.341164] hub 6-0:1.0: 2 ports detected [ 1.341218] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.341225] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.341228] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.341314] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.341359] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.341486] usb usb7: configuration #1 chosen from 1 choice [ 1.341553] hub 7-0:1.0: USB hub found [ 1.341560] hub 7-0:1.0: 2 ports detected [ 1.341786] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.345876] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.345881] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.346127] mice: PS/2 mouse device common for all mice [ 1.346413] rtc_cmos 00:03: RTC can wake from S4 [ 1.346487] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.346544] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.346631] device-mapper: uevent: version 1.0.3 [ 1.346726] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.346806] device-mapper: multipath: version 1.1.0 loaded [ 1.346809] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.346980] EISA: Probing bus 0 at eisa.0 [ 1.346982] EISA: Cannot allocate resource for mainboard [ 1.346985] Cannot allocate resource for EISA slot 1 [ 1.346987] Cannot allocate resource for EISA slot 2 [ 1.347028] EISA: Detected 0 cards. [ 1.347465] cpuidle: using governor ladder [ 1.348100] cpuidle: using governor menu [ 1.348717] TCP cubic registered [ 1.348764] NET: Registered protocol family 10 [ 1.349271] lo: Disabled Privacy Extensions [ 1.349627] NET: Registered protocol family 17 [ 1.349686] Bluetooth: L2CAP ver 2.13 [ 1.349688] Bluetooth: L2CAP socket layer initialized [ 1.349691] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.349693] Bluetooth: SCO socket layer initialized [ 1.349729] Bluetooth: RFCOMM TTY layer initialized [ 1.349732] Bluetooth: RFCOMM socket layer initialized [ 1.349734] Bluetooth: RFCOMM ver 1.11 [ 1.350465] Using IPI No-Shortcut mode [ 1.350668] PM: Resume from disk failed. [ 1.350685] registered taskstats version 1 [ 1.350821] Magic number: 14:639:336 [ 1.350846] tty tty57: hash matches [ 1.350944] rtc_cmos 00:03: setting system clock to 2010-02-24 15:18:13 UTC (1267024693) [ 1.350947] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.350949] EDD information not available. [ 1.366788] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.627271] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.742433] usb 1-3: configuration #1 chosen from 1 choice [ 1.742652] hub 1-3:1.0: USB hub found [ 1.742711] hub 1-3:1.0: 4 ports detected [ 1.916321] ata4.00: SATA link down (SStatus 0 SControl 300) [ 1.916344] ata4.01: SATA link down (SStatus 0 SControl 0) [ 2.011104] usb 1-3.1: new high speed USB device using ehci_hcd and address 4 [ 2.067345] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.067363] ata3.01: SATA link down (SStatus 0 SControl 300) [ 2.087080] usb 1-3.1: configuration #1 chosen from 1 choice [ 2.110167] ata3.00: ATA-8: ST9160412ASG, 0004SDM1, max UDMA/133 [ 2.110170] ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.117041] ata3.00: configured for UDMA/133 [ 2.117157] scsi 2:0:0:0: Direct-Access ATA ST9160412ASG 0004 PQ: 0 ANSI: 5 [ 2.117457] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.117510] sd 2:0:0:0: [sda] Write Protect is off [ 2.117513] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.117541] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.117683] sda: [ 2.117848] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.119656] sda1 sda2 [ 2.149365] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.149385] Freeing unused kernel memory: 516k freed [ 2.149705] Write protecting the kernel text: 4620k [ 2.149755] Write protecting the kernel read-only data: 1852k [ 2.150868] usb 1-3.2: new high speed USB device using ehci_hcd and address 5 [ 2.230316] usb 1-3.2: configuration #1 chosen from 1 choice [ 2.231252] hub 1-3.2:1.0: USB hub found [ 2.231358] hub 1-3.2:1.0: 4 ports detected [ 2.339949] Linux agpgart interface v0.103 [ 2.344206] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2f/device:30/input/input5 [ 2.344248] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.377595] tg3.c:v3.99 (April 20, 2009) [ 2.377616] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.377627] tg3 0000:09:00.0: setting latency timer to 64 [ 2.391827] tg3 0000:09:00.0: PME# disabled [ 2.403551] eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1c:23:1f:ff:9d [ 2.403556] eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 2.403558] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.403561] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.417287] ohci1394 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.443027] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 2.470098] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f1cff000-f1cff7ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 2.590383] usb 4-2: configuration #1 chosen from 1 choice [ 2.806269] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 3.023341] usb 7-1: configuration #1 chosen from 1 choice [ 3.026303] hub 7-1:1.0: USB hub found [ 3.028264] hub 7-1:1.0: 4 ports detected [ 3.270160] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 6 [ 3.346981] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 3.366190] Initializing USB Mass Storage driver... [ 3.367507] scsi4 : SCSI emulation for USB Mass Storage devices [ 3.368271] usb-storage: device found at 6 [ 3.368273] usb-storage: waiting for device to settle before scanning [ 3.368282] usbcore: registered new interface driver usb-storage [ 3.368285] USB Mass Storage support registered. [ 3.420507] usb 7-1.2: new full speed USB device using uhci_hcd and address 3 [ 3.531586] usb 7-1.2: configuration #1 chosen from 1 choice [ 3.577011] xor: measuring software checksum speed [ 3.581284] 8regs : 3744.000 MB/sec [ 3.586262] 8regs_prefetch: 3472.000 MB/sec [ 3.591263] 32regs : 1984.000 MB/sec [ 3.596265] 32regs_prefetch: 1884.000 MB/sec [ 3.596267] xor: using function: 8regs (3744.000 MB/sec) [ 3.598685] device-mapper: dm-raid45: initialized v0.2594b [ 3.740076] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc0000370bde1] [ 3.903852] PM: Starting manual resume from disk [ 3.903857] PM: Resume from partition 8:2 [ 3.903859] PM: Checking hibernation image. [ 3.904590] PM: Resume from disk failed. [ 3.948529] EXT4-fs (sda1): barriers enabled [ 3.975777] kjournald2 starting: pid 1115, dev sda1:8, commit interval 5 seconds [ 3.975790] EXT4-fs (sda1): delayed allocation enabled [ 3.975793] EXT4-fs: file extents enabled [ 3.977048] EXT4-fs: mballoc enabled [ 3.977066] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 4.604136] type=1505 audit(1267024696.752:2): operation="profile_load" pid=1138 name=/usr/share/gdm/guest-session/Xsession [ 4.608986] type=1505 audit(1267024696.757:3): operation="profile_load" pid=1139 name=/sbin/dhclient3 [ 4.609758] type=1505 audit(1267024696.758:4): operation="profile_load" pid=1139 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.610166] type=1505 audit(1267024696.758:5): operation="profile_load" pid=1139 name=/usr/lib/connman/scripts/dhclient-script [ 4.680401] type=1505 audit(1267024696.829:6): operation="profile_load" pid=1140 name=/usr/bin/evince [ 4.692340] type=1505 audit(1267024696.841:7): operation="profile_load" pid=1140 name=/usr/bin/evince-previewer [ 4.699457] type=1505 audit(1267024696.848:8): operation="profile_load" pid=1140 name=/usr/bin/evince-thumbnailer [ 4.711514] type=1505 audit(1267024696.860:9): operation="profile_load" pid=1142 name=/usr/bin/freshclam [ 4.729953] type=1505 audit(1267024696.878:10): operation="profile_load" pid=1143 name=/usr/lib/cups/backend/cups-pdf [ 8.369195] usb-storage: device scan complete [ 8.370910] scsi 4:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 8.371332] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 8.372150] sd 4:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 8.372642] sd 4:0:0:0: [sdb] Write Protect is off [ 8.372645] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 8.372648] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8.374518] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8.374522] sdb: sdb1 [ 8.377640] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8.377643] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 28.689175] udev: starting version 147 [ 28.712772] Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k [ 29.007473] lp: driver loaded but no devices found [ 29.009814] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.010271] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 29.024507] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x043D pid 0x00F3 [ 29.024534] usbcore: registered new interface driver usblp [ 29.036890] parport_pc 00:09: reported by Plug and Play ACPI [ 29.037042] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 29.094205] ppdev: user-space parallel port driver [ 29.096333] input: Dell WMI hotkeys as /devices/virtual/input/input6 [ 29.109225] usbcore: registered new interface driver usbserial [ 29.109242] USB Serial support registered for generic [ 29.110317] cfg80211: Calling CRDA to update world regulatory domain [ 29.110350] usbcore: registered new interface driver usbserial_generic [ 29.110353] usbserial: USB Serial Driver core [ 29.125738] cfg80211: World regulatory domain updated: [ 29.125742] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 29.125745] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 29.125748] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 29.125750] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 29.125753] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 29.125756] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 29.128465] lp0: using parport0 (interrupt-driven). [ 29.273263] nvidia: module license 'NVIDIA' taints kernel. [ 29.273268] Disabling lock debugging due to kernel taint [ 29.278609] NVRM: The NVIDIA GeForce FX 5200 GPU installed in this system is [ 29.278611] NVRM: supported through the NVIDIA 173.14.xx Legacy drivers. Please [ 29.278612] NVRM: visit http://www.nvidia.com/object/unix.html for more [ 29.278613] NVRM: information. The 185.18.36 NVIDIA driver will ignore [ 29.278614] NVRM: this GPU. Continuing probe... [ 29.321136] USB Serial support registered for GSM modem (1-port) [ 29.321189] option 4-2:1.0: GSM modem (1-port) converter detected [ 29.321283] usb 4-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 29.321298] option 4-2:1.1: GSM modem (1-port) converter detected [ 29.321353] usb 4-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 29.321383] usbcore: registered new interface driver option [ 29.321385] option: v0.7.2:USB Driver for GSM modems [ 29.400288] psmouse serio1: ID: 10 00 64 [ 29.402746] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01f9] [ 29.402779] yenta_cardbus 0000:03:01.0: CardBus bridge, secondary bus 0000:04 [ 29.402782] yenta_cardbus 0000:03:01.0: IO window: 0x002000-0x0020ff [ 29.402788] yenta_cardbus 0000:03:01.0: IO window: 0x002400-0x0024ff [ 29.402795] yenta_cardbus 0000:03:01.0: PREFETCH window: 0xf1400000-0xf17fffff [ 29.402801] yenta_cardbus 0000:03:01.0: MEM window: 0xf1800000-0xf1bfffff [ 29.402812] yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea [ 29.402814] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst [ 29.529370] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0c38, PCI irq 19 [ 29.529375] yenta_cardbus 0000:03:01.0: Socket status: 30000006 [ 29.529379] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 29.529387] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 29.529390] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean. [ 29.529722] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf1dfffff [ 29.544681] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 29.544684] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 29.544808] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 29.544823] iwl3945 0000:0c:00.0: setting latency timer to 64 [ 29.645089] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 29.645099] nvidia 0000:01:00.0: setting latency timer to 64 [ 29.645227] NVRM: ignoring the legacy GPU 03:08.0 [ 29.645234] nvidia: probe of 0000:03:08.0 failed with error -1 [ 29.645260] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 29.681553] iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 29.681557] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 29.681704] iwl3945 0000:0c:00.0: irq 28 for MSI/MSI-X [ 29.685270] EXT4-fs (sda1): internal journal on sda1:8 [ 29.797362] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 29.908445] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 29.910544] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 29.911445] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 29.912183] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 29.912936] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 30.024064] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 30.026347] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 30.071071] iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 30.100070] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 30.101228] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9 [ 30.107926] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 30.108012] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 30.123340] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input10 [ 30.207435] Registered led device: iwl-phy0::radio [ 30.207461] Registered led device: iwl-phy0::assoc [ 30.207548] Registered led device: iwl-phy0::RX [ 30.207572] Registered led device: iwl-phy0::TX [ 30.217753] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.225951] tg3 0000:09:00.0: PME# disabled [ 30.226071] tg3 0000:09:00.0: irq 29 for MSI/MSI-X [ 30.306318] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.479011] __ratelimit: 9 callbacks suppressed [ 30.479015] type=1505 audit(1267024722.626:14): operation="profile_replace" pid=1868 name=/usr/share/gdm/guest-session/Xsession [ 30.491650] type=1505 audit(1267024722.639:15): operation="profile_replace" pid=1869 name=/sbin/dhclient3 [ 30.492410] type=1505 audit(1267024722.640:16): operation="profile_replace" pid=1869 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 30.492820] type=1505 audit(1267024722.640:17): operation="profile_replace" pid=1869 name=/usr/lib/connman/scripts/dhclient-script [ 30.500051] type=1505 audit(1267024722.647:18): operation="profile_replace" pid=1870 name=/usr/bin/evince [ 30.526795] type=1505 audit(1267024722.674:19): operation="profile_replace" pid=1870 name=/usr/bin/evince-previewer [ 30.542332] type=1505 audit(1267024722.690:20): operation="profile_replace" pid=1870 name=/usr/bin/evince-thumbnailer [ 30.554457] type=1505 audit(1267024722.702:21): operation="profile_replace" pid=1888 name=/usr/bin/freshclam [ 30.558286] type=1505 audit(1267024722.706:22): operation="profile_replace" pid=1889 name=/usr/lib/cups/backend/cups-pdf [ 30.559872] type=1505 audit(1267024722.707:23): operation="profile_replace" pid=1889 name=/usr/sbin/cupsd [ 33.230121] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 33.230125] tg3: eth0: Flow control is off for TX and off for RX. [ 33.230314] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 43.365017] eth0: no IPv6 routers present [ 64.314249] usb 1-3.2.3: USB disconnect, address 6 [ 64.491033] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 7 [ 64.578984] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 64.586398] scsi5 : SCSI emulation for USB Mass Storage devices [ 64.587711] usb-storage: device found at 7 [ 64.587714] usb-storage: waiting for device to settle before scanning [ 69.588164] usb-storage: device scan complete [ 69.589910] scsi 5:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 69.591204] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 69.596183] sd 5:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 69.598573] sd 5:0:0:0: [sdb] Write Protect is off [ 69.598578] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 69.598581] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 69.601271] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 69.601279] sdb: sdb1 [ 69.607578] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 69.607584] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 93.005030] usb 1-3.2.3: USB disconnect, address 7 [ 93.187025] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 8 [ 93.267156] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 93.272802] scsi6 : SCSI emulation for USB Mass Storage devices [ 93.272969] usb-storage: device found at 8 [ 93.272971] usb-storage: waiting for device to settle before scanning [ 98.275024] usb-storage: device scan complete [ 98.279059] scsi 6:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 98.286227] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 98.294057] sd 6:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 98.296049] sd 6:0:0:0: [sdb] Write Protect is off [ 98.296054] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 98.296056] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 98.311039] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 98.311046] sdb: sdb1 [ 98.325045] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 98.325051] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 135.264899] usb 1-3.2.3: USB disconnect, address 8 [ 135.460394] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 9 [ 135.535302] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 135.542047] scsi7 : SCSI emulation for USB Mass Storage devices [ 135.543109] usb-storage: device found at 9 [ 135.543112] usb-storage: waiting for device to settle before scanning [ 140.542551] usb-storage: device scan complete [ 140.544318] scsi 7:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 140.544761] sd 7:0:0:0: Attached scsi generic sg1 type 0 [ 140.551058] sd 7:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 140.551663] sd 7:0:0:0: [sdb] Write Protect is off [ 140.551666] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 140.551669] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 140.553659] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 140.553665] sdb: sdb1 [ 140.557411] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 140.557416] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 184.775140] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 184.775144] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 184.775146] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 184.775147] vboxdrv: the usage of hardware performance counters by [ 184.775148] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 184.775152] vboxdrv: Found 2 processor cores. [ 184.775227] vboxdrv: fAsync=0 offMin=0x1d6 offMax=0x1202 [ 184.775833] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 184.775835] vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001). [ 186.586521] usb 1-3.1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 186.590382] __ratelimit: 6 callbacks suppressed [ 186.590385] type=1503 audit(1267024878.738:26): operation="open" pid=24517 parent=24514 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0" [ 186.590409] type=1503 audit(1267024878.738:27): operation="open" pid=24517 parent=24514 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB1" [ 5598.230149] usb 1-3.2.3: USB disconnect, address 9 [ 5598.299193] evolution[23419]: segfault at 0 ip 00ec935e sp bfcabad0 error 4 in libgobject-2.0.so.0.2200.3[ea2000+3c000] [ 5598.414036] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 10 [ 5598.491147] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 5598.500102] scsi8 : SCSI emulation for USB Mass Storage devices [ 5598.503944] usb-storage: device found at 10 [ 5598.503951] usb-storage: waiting for device to settle before scanning [ 5603.504249] usb-storage: device scan complete [ 5603.505827] scsi 8:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 5603.506861] sd 8:0:0:0: Attached scsi generic sg1 type 0 [ 5603.510443] sd 8:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 5603.511046] sd 8:0:0:0: [sdb] Write Protect is off [ 5603.511054] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 5603.511060] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 5603.515918] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 5603.515931] sdb: sdb1 [ 5603.520398] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 5603.520410] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 6215.217901] usb 1-3.2.3: USB disconnect, address 10 [ 6215.388426] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 11 [ 6215.463394] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 6215.473005] scsi9 : SCSI emulation for USB Mass Storage devices [ 6215.473309] usb-storage: device found at 11 [ 6215.473315] usb-storage: waiting for device to settle before scanning [ 6220.474280] usb-storage: device scan complete [ 6220.476952] scsi 9:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 6220.478251] sd 9:0:0:0: Attached scsi generic sg1 type 0 [ 6220.483079] sd 9:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 6220.484793] sd 9:0:0:0: [sdb] Write Protect is off [ 6220.484802] sd 9:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 6220.484808] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 6220.488042] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 6220.488061] sdb: sdb1 [ 6220.496789] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 6220.496802] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 6439.483987] usb 1-3.2.3: USB disconnect, address 11 [ 6439.654386] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 12 [ 6439.730074] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 6439.738326] scsi10 : SCSI emulation for USB Mass Storage devices [ 6439.738561] usb-storage: device found at 12 [ 6439.738567] usb-storage: waiting for device to settle before scanning [ 6444.739519] usb-storage: device scan complete [ 6444.742167] scsi 10:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 6444.743774] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 6444.746657] sd 10:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 6444.749830] sd 10:0:0:0: [sdb] Write Protect is off [ 6444.749840] sd 10:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 6444.749846] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 6444.760004] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 6444.760022] sdb: sdb1 [ 6444.768317] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 6444.768329] sd 10:0:0:0: [sdb] Attached SCSI removable disk [ 6605.635463] usb 1-3.2.3: USB disconnect, address 12 [ 6605.811489] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 13 [ 6605.886471] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 6605.894068] scsi11 : SCSI emulation for USB Mass Storage devices [ 6605.895567] usb-storage: device found at 13 [ 6605.895573] usb-storage: waiting for device to settle before scanning [ 6608.707600] usb 1-3.2.3: USB disconnect, address 13 [ 6608.879505] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 14 [ 6608.954470] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 6608.963643] scsi12 : SCSI emulation for USB Mass Storage devices [ 6608.963912] usb-storage: device found at 14 [ 6608.963918] usb-storage: waiting for device to settle before scanning [ 6613.964334] usb-storage: device scan complete [ 6613.967787] scsi 12:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 6613.969137] sd 12:0:0:0: Attached scsi generic sg1 type 0 [ 6613.973818] sd 12:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 6613.976737] sd 12:0:0:0: [sdb] Write Protect is off [ 6613.976746] sd 12:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 6613.976752] sd 12:0:0:0: [sdb] Assuming drive cache: write through [ 6613.983857] sd 12:0:0:0: [sdb] Assuming drive cache: write through [ 6613.983875] sdb: sdb1 [ 6613.991728] sd 12:0:0:0: [sdb] Assuming drive cache: write through [ 6613.991740] sd 12:0:0:0: [sdb] Attached SCSI removable disk [ 6683.974984] usb 1-3.2.3: USB disconnect, address 14 [ 6684.145391] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 15 [ 6684.220482] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 6684.229349] scsi13 : SCSI emulation for USB Mass Storage devices [ 6684.229653] usb-storage: device found at 15 [ 6684.229658] usb-storage: waiting for device to settle before scanning [ 6689.230333] usb-storage: device scan complete [ 6689.232164] scsi 13:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 6689.233414] sd 13:0:0:0: Attached scsi generic sg1 type 0 [ 6689.234623] sd 13:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 6689.235493] sd 13:0:0:0: [sdb] Write Protect is off [ 6689.235501] sd 13:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 6689.235507] sd 13:0:0:0: [sdb] Assuming drive cache: write through [ 6689.242627] sd 13:0:0:0: [sdb] Assuming drive cache: write through [ 6689.242645] sdb: sdb1 [ 6689.248746] sd 13:0:0:0: [sdb] Assuming drive cache: write through [ 6689.248759] sd 13:0:0:0: [sdb] Attached SCSI removable disk [ 6693.191401] usb 1-3.2.3: USB disconnect, address 15 [ 6693.368171] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 16 [ 6693.445148] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 6693.451064] scsi14 : SCSI emulation for USB Mass Storage devices [ 6693.451343] usb-storage: device found at 16 [ 6693.451348] usb-storage: waiting for device to settle before scanning [ 6693.703424] usb 1-3.2.3: USB disconnect, address 16 [ 6693.874196] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 17 [ 6694.348035] usb 1-3.2.3: device not accepting address 17, error -71 [ 6694.360449] hub 1-3.2:1.0: unable to enumerate USB device on port 3 [ 6694.528228] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 19 [ 6694.605195] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 6694.613067] scsi15 : SCSI emulation for USB Mass Storage devices [ 6694.613644] usb-storage: device found at 19 [ 6694.613650] usb-storage: waiting for device to settle before scanning [ 6699.614326] usb-storage: device scan complete [ 6699.616004] scsi 15:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 6699.617371] sd 15:0:0:0: Attached scsi generic sg1 type 0 [ 6699.618715] sd 15:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 6699.619515] sd 15:0:0:0: [sdb] Write Protect is off [ 6699.619524] sd 15:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 6699.619530] sd 15:0:0:0: [sdb] Assuming drive cache: write through [ 6699.623317] sd 15:0:0:0: [sdb] Assuming drive cache: write through [ 6699.623334] sdb: sdb1 [ 6699.635335] sd 15:0:0:0: [sdb] Assuming drive cache: write through [ 6699.635349] sd 15:0:0:0: [sdb] Attached SCSI removable disk [ 9302.204755] usb 1-3.2.3: USB disconnect, address 19 [ 9302.378409] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 20 [ 9302.454519] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 9302.462068] scsi16 : SCSI emulation for USB Mass Storage devices [ 9302.463623] usb-storage: device found at 20 [ 9302.463629] usb-storage: waiting for device to settle before scanning [ 9307.464388] usb-storage: device scan complete [ 9307.466061] scsi 16:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 9307.468754] sd 16:0:0:0: Attached scsi generic sg1 type 0 [ 9307.474758] sd 16:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 9307.477109] sd 16:0:0:0: [sdb] Write Protect is off [ 9307.477120] sd 16:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 9307.477126] sd 16:0:0:0: [sdb] Assuming drive cache: write through [ 9307.482032] sd 16:0:0:0: [sdb] Assuming drive cache: write through [ 9307.482049] sdb: sdb1 [ 9307.491311] sd 16:0:0:0: [sdb] Assuming drive cache: write through [ 9307.491323] sd 16:0:0:0: [sdb] Attached SCSI removable disk [ 9337.534343] usb 1-3.2.3: USB disconnect, address 20 [ 9337.812249] usb 1-3.2.3: new full speed USB device using ehci_hcd and address 21 [ 9337.876128] usb 1-3.2.3: device descriptor read/64, error -32 [ 9338.040132] usb 1-3.2.3: device descriptor read/64, error -32 [ 9338.203144] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 22 [ 9338.279236] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 9338.287676] scsi17 : SCSI emulation for USB Mass Storage devices [ 9338.288036] usb-storage: device found at 22 [ 9338.288041] usb-storage: waiting for device to settle before scanning [ 9338.558388] usb 1-3.2.3: USB disconnect, address 22 [ 9338.736163] usb 1-3.2.3: new full speed USB device using ehci_hcd and address 23 [ 9338.740281] usb 1-3.2: clear tt 3 (8000) error -32 [ 9338.744399] usb 1-3.2: clear tt 3 (8000) error -32 [ 9338.748525] usb 1-3.2: clear tt 3 (8000) error -32 [ 9338.760400] hub 1-3.2:1.0: unable to enumerate USB device on port 3 [ 9338.982182] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 24 [ 9339.059151] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 9339.064969] scsi18 : SCSI emulation for USB Mass Storage devices [ 9339.066033] usb-storage: device found at 24 [ 9339.066039] usb-storage: waiting for device to settle before scanning [ 9339.582436] usb 1-3.2.3: USB disconnect, address 24 [ 9339.753214] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 25 [ 9339.830403] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 9339.839050] scsi19 : SCSI emulation for USB Mass Storage devices [ 9339.848460] usb-storage: device found at 25 [ 9339.848467] usb-storage: waiting for device to settle before scanning [ 9344.848548] usb-storage: device scan complete [ 9344.850136] scsi 19:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 9344.852001] sd 19:0:0:0: Attached scsi generic sg1 type 0 [ 9344.852301] sd 19:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 9344.853058] sd 19:0:0:0: [sdb] Write Protect is off [ 9344.853066] sd 19:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 9344.853072] sd 19:0:0:0: [sdb] Assuming drive cache: write through [ 9344.860940] sd 19:0:0:0: [sdb] Assuming drive cache: write through [ 9344.860958] sdb: sdb1 [ 9344.866438] sd 19:0:0:0: [sdb] Assuming drive cache: write through [ 9344.866451] sd 19:0:0:0: [sdb] Attached SCSI removable disk [ 9345.982723] usb 1-3.2.3: USB disconnect, address 25 [ 9346.154255] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 26 [ 9346.230220] usb 1-3.2.3: configuration #1 chosen from 1 choice [ 9346.237658] scsi20 : SCSI emulation for USB Mass Storage devices [ 9346.238175] usb-storage: device found at 26 [ 9346.238180] usb-storage: waiting for device to settle before scanning [ 9351.237583] usb-storage: device scan complete [ 9351.239156] scsi 20:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 9351.240438] sd 20:0:0:0: Attached scsi generic sg1 type 0 [ 9351.245055] sd 20:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [ 9351.246880] sd 20:0:0:0: [sdb] Write Protect is off [ 9351.246890] sd 20:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 9351.246896] sd 20:0:0:0: [sdb] Assuming drive cache: write through [ 9351.251477] sd 20:0:0:0: [sdb] Assuming drive cache: write through [ 9351.251490] sdb: sdb1 [ 9351.259124] sd 20:0:0:0: [sdb] Assuming drive cache: write through [ 9351.259138] sd 20:0:0:0: [sdb] Attached SCSI removable disk [11487.007021] usb 1-3.2.3: USB disconnect, address 26 [11487.212154] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 27 [11487.293268] usb 1-3.2.3: configuration #1 chosen from 1 choice [11487.300041] scsi21 : SCSI emulation for USB Mass Storage devices [11487.313278] usb-storage: device found at 27 [11487.313282] usb-storage: waiting for device to settle before scanning [11492.314168] usb-storage: device scan complete [11492.315897] scsi 21:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [11492.316459] sd 21:0:0:0: Attached scsi generic sg1 type 0 [11492.324288] sd 21:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [11492.326396] sd 21:0:0:0: [sdb] Write Protect is off [11492.326399] sd 21:0:0:0: [sdb] Mode Sense: 43 00 00 00 [11492.326402] sd 21:0:0:0: [sdb] Assuming drive cache: write through [11492.339273] sd 21:0:0:0: [sdb] Assuming drive cache: write through [11492.339280] sdb: sdb1 [11492.354275] sd 21:0:0:0: [sdb] Assuming drive cache: write through [11492.354281] sd 21:0:0:0: [sdb] Attached SCSI removable disk [13167.210589] usb 1-3.2.3: USB disconnect, address 27 [13167.381741] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 28 [13167.466122] usb 1-3.2.3: configuration #1 chosen from 1 choice [13167.475015] scsi22 : SCSI emulation for USB Mass Storage devices [13167.476020] usb-storage: device found at 28 [13167.476022] usb-storage: waiting for device to settle before scanning [13172.476505] usb-storage: device scan complete [13172.478978] scsi 22:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [13172.479533] sd 22:0:0:0: Attached scsi generic sg1 type 0 [13172.482343] sd 22:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [13172.483738] sd 22:0:0:0: [sdb] Write Protect is off [13172.483743] sd 22:0:0:0: [sdb] Mode Sense: 43 00 00 00 [13172.483745] sd 22:0:0:0: [sdb] Assuming drive cache: write through [13172.494021] sd 22:0:0:0: [sdb] Assuming drive cache: write through [13172.494027] sdb: sdb1 [13172.506028] sd 22:0:0:0: [sdb] Assuming drive cache: write through [13172.506033] sd 22:0:0:0: [sdb] Attached SCSI removable disk [22049.530126] usb 1-3.2.3: USB disconnect, address 28 [22049.706018] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 29 [22049.788994] usb 1-3.2.3: configuration #1 chosen from 1 choice [22049.795437] scsi23 : SCSI emulation for USB Mass Storage devices [22049.795617] usb-storage: device found at 29 [22049.795620] usb-storage: waiting for device to settle before scanning [22054.796277] usb-storage: device scan complete [22054.798111] scsi 23:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [22054.799736] sd 23:0:0:0: Attached scsi generic sg1 type 0 [22054.816905] sd 23:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [22054.817529] sd 23:0:0:0: [sdb] Write Protect is off [22054.817537] sd 23:0:0:0: [sdb] Mode Sense: 43 00 00 00 [22054.817544] sd 23:0:0:0: [sdb] Assuming drive cache: write through [22054.820292] sd 23:0:0:0: [sdb] Assuming drive cache: write through [22054.820302] sdb: sdb1 [22054.823872] sd 23:0:0:0: [sdb] Assuming drive cache: write through [22054.823877] sd 23:0:0:0: [sdb] Attached SCSI removable disk [22534.159943] usb 1-3.2.3: USB disconnect, address 29 [22534.329458] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 30 [22534.404445] usb 1-3.2.3: configuration #1 chosen from 1 choice [22534.411288] scsi24 : SCSI emulation for USB Mass Storage devices [22534.411544] usb-storage: device found at 30 [22534.411551] usb-storage: waiting for device to settle before scanning [22539.412315] usb-storage: device scan complete [22539.413990] scsi 24:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [22539.415406] sd 24:0:0:0: Attached scsi generic sg1 type 0 [22539.417087] sd 24:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [22539.417690] sd 24:0:0:0: [sdb] Write Protect is off [22539.417698] sd 24:0:0:0: [sdb] Mode Sense: 43 00 00 00 [22539.417704] sd 24:0:0:0: [sdb] Assuming drive cache: write through [22539.422697] sd 24:0:0:0: [sdb] Assuming drive cache: write through [22539.422711] sdb: sdb1 [22539.427198] sd 24:0:0:0: [sdb] Assuming drive cache: write through [22539.427209] sd 24:0:0:0: [sdb] Attached SCSI removable disk [22590.226466] usb 1-3.2.3: USB disconnect, address 30 [22590.382552] evolution[28720]: segfault at 0 ip 055c035e sp bfe755c0 error 4 in libgobject-2.0.so.0.2200.3[5599000+3c000] [22590.411020] usb 1-3.2.3: new high speed USB device using ehci_hcd and address 31 [22590.500149] usb 1-3.2.3: configuration #1 chosen from 1 choice [22590.512087] scsi25 : SCSI emulation for USB Mass Storage devices [22590.516508] usb-storage: device found at 31 [22590.516512] usb-storage: waiting for device to settle before scanning [22595.517333] usb-storage: device scan complete [22595.519149] scsi 25:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [22595.520393] sd 25:0:0:0: Attached scsi generic sg1 type 0 [22595.522858] sd 25:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB) [22595.523477] sd 25:0:0:0: [sdb] Write Protect is off [22595.523485] sd 25:0:0:0: [sdb] Mode Sense: 43 00 00 00 [22595.523491] sd 25:0:0:0: [sdb] Assuming drive cache: write through [22595.532354] sd 25:0:0:0: [sdb] Assuming drive cache: write through [22595.532368] sdb: sdb1 [22595.540348] sd 25:0:0:0: [sdb] Assuming drive cache: write through [22595.540359] sd 25:0:0:0: [sdb] Attached SCSI removable disk [24317.869141] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [24317.871826] SGI XFS Quota Management subsystem [24317.877197] JFS: nTxBlock = 8192, nTxLock = 65536 [24317.994634] NTFS driver 2.1.29 [Flags: R/O MODULE]. [24318.061096] QNX4 filesystem 0.2.3 registered. [24637.951721] ACPI: \_SB_.PCI0.PCIE.GDCK - undocking [24639.613166] usb 1-3: USB disconnect, address 2 [24639.613170] usb 1-3.1: USB disconnect, address 4 [24639.613358] usblp0: removed [24639.613487] usb 1-3.2: USB disconnect, address 5 [24639.613489] usb 1-3.2.3: USB disconnect, address 31 [24640.160818] tg3: eth0: Link is down. [24640.768408] ACPI: \_SB_.PCI0.PCIE.GDCK - undocking [24642.847614] dell-wmi: Unknown key e044 pressed [25132.281761] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [25312.480634] cfg80211: Found new beacon on frequency: 5825 MHz (Ch 165) on phy0 [25761.119429] PPP BSD Compression module registered [25761.175063] type=1505 audit(1267050453.322:28): operation="profile_replace" pid=18734 name=/sbin/dhclient3 [25761.177356] type=1505 audit(1267050453.325:29): operation="profile_replace" pid=18734 name=/usr/lib/NetworkManager/nm-dhcp-client.action [25761.178395] type=1505 audit(1267050453.326:30): operation="profile_replace" pid=18734 name=/usr/lib/connman/scripts/dhclient-script [25761.189674] PPP Deflate Compression module registered [25796.779682] type=1505 audit(1267050488.927:31): operation="profile_replace" pid=19262 name=/usr/lib/cups/backend/cups-pdf [25796.782390] type=1505 audit(1267050488.930:32): operation="profile_replace" pid=19262 name=/usr/sbin/cupsd [25972.680325] type=1505 audit(1267050664.828:33): operation="profile_replace" pid=31694 name=/sbin/dhclient3 [25972.681070] type=1505 audit(1267050664.828:34): operation="profile_replace" pid=31694 name=/usr/lib/NetworkManager/nm-dhcp-client.action [25972.681504] type=1505 audit(1267050664.829:35): operation="profile_replace" pid=31694 name=/usr/lib/connman/scripts/dhclient-script [25990.478794] type=1505 audit(1267050682.626:36): operation="profile_replace" pid=989 name=/usr/share/gdm/guest-session/Xsession [25990.478958] type=1505 audit(1267050682.626:37): operation="profile_replace" pid=990 name=/sbin/dhclient3 [25990.481819] type=1505 audit(1267050682.629:38): operation="profile_replace" pid=990 name=/usr/lib/NetworkManager/nm-dhcp-client.action [25990.483212] type=1505 audit(1267050682.630:39): operation="profile_replace" pid=990 name=/usr/lib/connman/scripts/dhclient-script [25990.493822] type=1505 audit(1267050682.641:40): operation="profile_replace" pid=991 name=/usr/bin/evince [25990.494828] type=1505 audit(1267050682.642:41): operation="profile_replace" pid=993 name=/usr/bin/freshclam [25990.502315] type=1505 audit(1267050682.650:42): operation="profile_replace" pid=994 name=/usr/lib/cups/backend/cups-pdf [25990.503250] type=1505 audit(1267050682.650:43): operation="profile_replace" pid=994 name=/usr/sbin/cupsd [25990.506856] type=1505 audit(1267050682.654:44): operation="profile_replace" pid=995 name=/usr/sbin/mysqld-akonadi [25990.509561] type=1505 audit(1267050682.657:45): operation="profile_replace" pid=996 name=/usr/sbin/tcpdump [26050.912729] __ratelimit: 42 callbacks suppressed [26050.912733] type=1505 audit(1267050743.060:60): operation="profile_replace" pid=1728 name=/usr/sbin/tcpdump [26075.028926] apm: BIOS not found. [26131.038405] type=1505 audit(1267050823.186:61): operation="profile_replace" pid=3371 name=/usr/bin/freshclam [26272.143928] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [27772.052307] cfg80211: Found new beacon on frequency: 5765 MHz (Ch 153) on phy0