[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-2-generic (buildd@tipua) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-12ubuntu2) ) #17-Ubuntu SMP Fri Jan 10 12:14:58 UTC 2014 (Ubuntu 3.13.0-2.17-generic 3.13.0-rc7) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffcffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ffd0000-0x000000003ffdefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003ffdf000-0x000000003fffffff] ACPI NVS [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: FUJITSU SIEMENS Amilo M1424/To be filled by O.E.M., BIOS 080010 12/29/2004 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3ffd0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01b74000, 0x01b74fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35cea000-0x36e6cfff] [ 0.000000] ACPI: RSDP 000f64a0 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 3ffd0100 00003C (v01 FSC PC 12000429 MSFT 00000097) [ 0.000000] ACPI: FACP 3ffd0290 0000F4 (v03 FSC PC 12000429 MSFT 00000097) [ 0.000000] ACPI: DSDT 3ffd03f0 003B45 (v01 UW___ F14_____ 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 3ffdf000 000040 [ 0.000000] ACPI: SLIC 000ff200 000176 (v01 FSC PC 00060000 LTP 00000000) [ 0.000000] ACPI: OEMB 3ffdf040 0001BC (v01 FSC AMI_OEM 12000429 MSFT 00000097) [ 0.000000] 131MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01b75000, 0x01b75fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x3ffcffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x3ffcffff] [ 0.000000] On node 0 totalpages: 261998 [ 0.000000] free_area_init_node: node 0, pgdat c197da80, node_mem_map f73fe020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 264 pages used for memmap [ 0.000000] HighMem zone: 33746 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0x40000000-0xffffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f73e9000 s36096 r0 d21248 u57344 [ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260214 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-2-generic root=UUID=3b183e0b-3e6d-4030-b9c8-367e7768093a ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2096760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0003ffd0) [ 0.000000] Memory: 1007128K/1047992K available (6457K kernel code, 636K rwdata, 2732K rodata, 872K init, 920K bss, 40864K reserved, 134984K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc199b000 - 0xc1a75000 ( 872 kB) [ 0.000000] .data : 0xc164e8f2 - 0xc199a3c0 (3374 kB) [ 0.000000] .text : 0xc1000000 - 0xc164e8f2 (6458 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1600.167 MHz processor [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.33 BogoMIPS (lpj=6400668) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004073] Security Framework initialized [ 0.004110] AppArmor: AppArmor initialized [ 0.004113] Yama: becoming mindful. [ 0.004230] Mount-cache hash table entries: 512 [ 0.004676] Initializing cgroup subsys memory [ 0.004689] Initializing cgroup subsys devices [ 0.004695] Initializing cgroup subsys freezer [ 0.004700] Initializing cgroup subsys blkio [ 0.004704] Initializing cgroup subsys perf_event [ 0.004709] Initializing cgroup subsys hugetlb [ 0.004752] Disabled fast string operations [ 0.004765] mce: CPU supports 5 MCE banks [ 0.004779] CPU0: Thermal monitoring enabled (TM1) [ 0.004801] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 [ 0.004801] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8 [ 0.004801] tlb_flushall_shift: 6 [ 0.020504] Freeing SMP alternatives memory: 32K (c1a75000 - c1a7d000) [ 0.022602] ACPI: Core revision 20131115 [ 0.026406] ACPI: All ACPI Tables successfully acquired [ 0.026416] ACPI: setting ELCR to 0200 (from 0a00) [ 0.028015] ftrace: allocating 27507 entries in 54 pages [ 0.048180] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.048188] smpboot: SMP motherboard not detected [ 0.048192] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.052000] smpboot: SMP disabled [ 0.052000] Performance Events: p6 PMU driver. [ 0.052000] ... version: 0 [ 0.052000] ... bit width: 32 [ 0.052000] ... generic registers: 2 [ 0.052000] ... value mask: 00000000ffffffff [ 0.052000] ... max period: 000000007fffffff [ 0.052000] ... fixed-purpose events: 0 [ 0.052000] ... event mask: 0000000000000003 [ 0.054920] x86: Booted up 1 node, 1 CPUs [ 0.054928] smpboot: Total of 1 processors activated (3200.33 BogoMIPS) [ 0.055036] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.055219] devtmpfs: initialized [ 0.055566] EVM: security.selinux [ 0.055569] EVM: security.SMACK64 [ 0.055571] EVM: security.ima [ 0.055573] EVM: security.capability [ 0.055722] PM: Registering ACPI NVS region [mem 0x3ffdf000-0x3fffffff] (135168 bytes) [ 0.057784] pinctrl core: initialized pinctrl subsystem [ 0.057914] regulator-dummy: no parameters [ 0.057951] RTC time: 21:17:17, date: 01/13/14 [ 0.058021] NET: Registered protocol family 16 [ 0.058298] EISA bus registered [ 0.058303] cpuidle: using governor ladder [ 0.058306] cpuidle: using governor menu [ 0.058435] ACPI: bus type PCI registered [ 0.058440] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.059691] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.059726] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.059729] PCI: Using configuration type 1 for base access [ 0.061739] bio: create slab at 0 [ 0.061979] ACPI: Added _OSI(Module Device) [ 0.061982] ACPI: Added _OSI(Processor Device) [ 0.061985] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.061988] ACPI: Added _OSI(Processor Aggregator Device) [ 0.064689] ACPI: Executed 2 blocks of module-level executable AML code [ 0.068048] ACPI: Interpreter enabled [ 0.068072] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.068079] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.068101] ACPI: (supports S0 S3 S4 S5) [ 0.068104] ACPI: Using PIC for interrupt routing [ 0.068157] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.068310] ACPI: No dock devices found. [ 0.080282] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.080308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.084637] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.084647] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.084655] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.084758] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.084763] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.084767] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.084771] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.084775] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d6fff] (ignored) [ 0.084779] acpi PNP0A03:00: host bridge window [mem 0x000d7000-0x000d7fff] (ignored) [ 0.084783] acpi PNP0A03:00: host bridge window [mem 0x000de000-0x000dffff] (ignored) [ 0.084787] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored) [ 0.084790] PCI: root bus 00: using default resources [ 0.084795] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.084982] PCI host bridge to bus 0000:00 [ 0.084988] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.084992] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.084996] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.085012] pci 0000:00:00.0: [8086:3340] type 00 class 0x060000 [ 0.085023] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] [ 0.085148] pci 0000:00:01.0: [8086:3341] type 01 class 0x060400 [ 0.085290] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300 [ 0.085338] pci 0000:00:1d.0: reg 0x20: [io 0xe800-0xe81f] [ 0.085438] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.085506] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300 [ 0.085554] pci 0000:00:1d.1: reg 0x20: [io 0xe880-0xe89f] [ 0.085645] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.085704] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300 [ 0.085752] pci 0000:00:1d.2: reg 0x20: [io 0xec00-0xec1f] [ 0.085842] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.085921] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320 [ 0.085946] pci 0000:00:1d.7: reg 0x10: [mem 0xffeffc00-0xffefffff] [ 0.086047] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.086148] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400 [ 0.086230] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.086283] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100 [ 0.086355] pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000] [ 0.086362] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH4 GPIO [ 0.086459] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a [ 0.086475] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.086487] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.086499] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.086510] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.086522] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] [ 0.086534] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff] [ 0.086636] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500 [ 0.086684] pci 0000:00:1f.3: reg 0x20: [io 0x0540-0x055f] [ 0.086800] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100 [ 0.086818] pci 0000:00:1f.5: reg 0x10: [io 0xd800-0xd8ff] [ 0.086829] pci 0000:00:1f.5: reg 0x14: [io 0xe000-0xe03f] [ 0.086840] pci 0000:00:1f.5: reg 0x18: [mem 0xffeff800-0xffeff9ff] [ 0.086852] pci 0000:00:1f.5: reg 0x1c: [mem 0xffeff400-0xffeff4ff] [ 0.086902] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.087001] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300 [ 0.087019] pci 0000:00:1f.6: reg 0x10: [io 0xe400-0xe4ff] [ 0.087030] pci 0000:00:1f.6: reg 0x14: [io 0xe080-0xe0ff] [ 0.087095] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.087144] pci 0000:00:1f.6: System wakeup disabled by ACPI [ 0.087258] pci 0000:01:00.0: [1002:4e52] type 00 class 0x030000 [ 0.087276] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref] [ 0.087285] pci 0000:01:00.0: reg 0x14: [io 0xb000-0xb0ff] [ 0.087295] pci 0000:01:00.0: reg 0x18: [mem 0xffcf0000-0xffcfffff] [ 0.087322] pci 0000:01:00.0: reg 0x30: [mem 0xffcc0000-0xffcdffff pref] [ 0.087354] pci 0000:01:00.0: supports D1 D2 [ 0.087438] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.087444] pci 0000:00:01.0: bridge window [io 0x9000-0xbfff] [ 0.087449] pci 0000:00:01.0: bridge window [mem 0xffc00000-0xffcfffff] [ 0.087454] pci 0000:00:01.0: bridge window [mem 0xceb00000-0xdeafffff pref] [ 0.087550] pci 0000:02:09.0: [104c:8023] type 00 class 0x0c0010 [ 0.087569] pci 0000:02:09.0: reg 0x10: [mem 0xffdff800-0xffdfffff] [ 0.087581] pci 0000:02:09.0: reg 0x14: [mem 0xffdf8000-0xffdfbfff] [ 0.087650] pci 0000:02:09.0: supports D1 D2 [ 0.087654] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot [ 0.087727] pci 0000:02:0a.0: [10ec:8139] type 00 class 0x020000 [ 0.087745] pci 0000:02:0a.0: reg 0x10: [io 0xc800-0xc8ff] [ 0.087757] pci 0000:02:0a.0: reg 0x14: [mem 0xffdff400-0xffdff4ff] [ 0.087824] pci 0000:02:0a.0: supports D1 D2 [ 0.087827] pci 0000:02:0a.0: PME# supported from D1 D2 D3hot D3cold [ 0.087855] pci 0000:02:0a.0: System wakeup disabled by ACPI [ 0.087917] pci 0000:02:0b.0: [1217:7114] type 02 class 0x060700 [ 0.087935] pci 0000:02:0b.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.087965] pci 0000:02:0b.0: supports D1 D2 [ 0.087969] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.088054] pci 0000:02:0b.1: [1217:7114] type 02 class 0x060700 [ 0.088072] pci 0000:02:0b.1: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.088102] pci 0000:02:0b.1: supports D1 D2 [ 0.088106] pci 0000:02:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.088184] pci 0000:02:0b.2: [1217:7110] type 00 class 0x088000 [ 0.088203] pci 0000:02:0b.2: reg 0x10: [mem 0xffdfe000-0xffdfefff] [ 0.088280] pci 0000:02:0b.2: supports D1 D2 [ 0.088284] pci 0000:02:0b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.088369] pci 0000:02:0d.0: [8086:4220] type 00 class 0x028000 [ 0.088389] pci 0000:02:0d.0: reg 0x10: [mem 0xffdfd000-0xffdfdfff] [ 0.088465] pci 0000:02:0d.0: PME# supported from D0 D3hot D3cold [ 0.088550] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) [ 0.088557] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.088563] pci 0000:00:1e.0: bridge window [mem 0xffd00000-0xffdfffff] [ 0.088569] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.088573] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.088578] pci 0000:02:0b.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.088587] pci 0000:02:0b.1: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.088651] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02] (conflicts with (null) [bus 02]) [ 0.088659] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06 [ 0.088663] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02] (conflicts with (null) [bus 02]) [ 0.088670] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02] [ 0.088722] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 02] (conflicts with (null) [bus 02]) [ 0.088728] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a [ 0.088733] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 02] (conflicts with (null) [bus 02]) [ 0.088739] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:02 [bus 02] [ 0.088753] pci_bus 0000:00: on NUMA node 0 [ 0.089444] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 9 *11 12 14 15) [ 0.089444] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 *9 11 12 14 15) [ 0.089444] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 9 *11 12 14 15) [ 0.089444] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *11 12 14 15) [ 0.089444] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.089444] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.089444] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.089444] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *11 12 14 15) [ 0.089444] ACPI: \_SB_.PCI0: notify handler is installed [ 0.089444] Found 1 acpi root devices [ 0.089444] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.089530] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.089534] vgaarb: loaded [ 0.089536] vgaarb: bridge control possible 0000:01:00.0 [ 0.089950] SCSI subsystem initialized [ 0.090033] libata version 3.00 loaded. [ 0.090069] ACPI: bus type USB registered [ 0.090112] usbcore: registered new interface driver usbfs [ 0.090129] usbcore: registered new interface driver hub [ 0.090164] usbcore: registered new device driver usb [ 0.090336] PCI: Using ACPI for IRQ routing [ 0.092008] PCI: pci_cache_line_size set to 64 bytes [ 0.092070] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.092074] e820: reserve RAM buffer [mem 0x3ffd0000-0x3fffffff] [ 0.092261] NetLabel: Initializing [ 0.092264] NetLabel: domain hash size = 128 [ 0.092266] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.092288] NetLabel: unlabeled traffic allowed by default [ 0.092491] Switched to clocksource refined-jiffies [ 0.105934] AppArmor: AppArmor Filesystem Enabled [ 0.106020] pnp: PnP ACPI init [ 0.106051] ACPI: bus type PNP registered [ 0.106223] pnp 00:00: [dma 4] [ 0.106282] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.106337] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.106426] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.106532] pnp 00:03: Plug and Play ACPI device, IDs SYN0801 SYN0800 PNP0f13 (active) [ 0.106577] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.106623] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.107114] system 00:06: [io 0x0600-0x060f] has been reserved [ 0.107119] system 00:06: [io 0x0640-0x064f] has been reserved [ 0.107125] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107341] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.107347] system 00:07: [io 0x0400-0x047f] could not be reserved [ 0.107351] system 00:07: [io 0x0500-0x053f] has been reserved [ 0.107356] system 00:07: [io 0x0860] has been reserved [ 0.107360] system 00:07: [io 0x0862] has been reserved [ 0.107364] system 00:07: [io 0x0864] has been reserved [ 0.107369] system 00:07: [io 0x0866] has been reserved [ 0.107373] system 00:07: [io 0x0868] has been reserved [ 0.107377] system 00:07: [io 0x086c] has been reserved [ 0.107383] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved [ 0.107387] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.107393] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.107542] system 00:08: [io 0x1100-0x113f] has been reserved [ 0.107547] system 00:08: [io 0x1254] has been reserved [ 0.107552] system 00:08: [io 0x12d4] has been reserved [ 0.107556] system 00:08: [io 0x1300-0x1375] has been reserved [ 0.107561] system 00:08: [io 0x1377-0x137f] has been reserved [ 0.107565] system 00:08: [mem 0xfec00000-0xfec00fff] has been reserved [ 0.107570] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.107575] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.112270] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.112276] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.112281] system 00:09: [mem 0x00100000-0x3fffffff] could not be reserved [ 0.112287] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.112554] pnp: PnP ACPI: found 10 devices [ 0.112557] ACPI: bus type PNP unregistered [ 0.112563] PnPBIOS: Disabled by ACPI PNP [ 0.150475] Switched to clocksource acpi_pm [ 0.150520] pci 0000:02:0b.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.150525] pci 0000:02:0b.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.150533] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02] add_size 8000000 [ 0.150540] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment [ 0.150546] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 8000000 [ 0.150557] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x47ffffff pref] [ 0.150562] pci 0000:00:1f.1: BAR 5: assigned [mem 0x48000000-0x480003ff] [ 0.150571] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.150575] pci 0000:00:01.0: bridge window [io 0x9000-0xbfff] [ 0.150581] pci 0000:00:01.0: bridge window [mem 0xffc00000-0xffcfffff] [ 0.150586] pci 0000:00:01.0: bridge window [mem 0xceb00000-0xdeafffff pref] [ 0.150600] pci 0000:02:0b.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.150605] pci 0000:02:0b.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.150609] pci 0000:02:0b.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.150613] pci 0000:02:0b.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.150618] pci 0000:02:0b.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.150622] pci 0000:02:0b.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.150626] pci 0000:02:0b.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.150630] pci 0000:02:0b.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.150636] pci 0000:02:0b.0: BAR 0: assigned [mem 0x4c000000-0x4c000fff] [ 0.150643] pci 0000:02:0b.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref] [ 0.150649] pci 0000:02:0b.0: BAR 16: assigned [mem 0x50000000-0x53ffffff] [ 0.150655] pci 0000:02:0b.1: BAR 0: assigned [mem 0x54000000-0x54000fff] [ 0.150662] pci 0000:02:0b.1: BAR 15: assigned [mem 0x44000000-0x47ffffff pref] [ 0.150668] pci 0000:02:0b.1: BAR 16: assigned [mem 0x58000000-0x5bffffff] [ 0.150672] pci 0000:02:0b.0: BAR 13: assigned [io 0xc000-0xc0ff] [ 0.150676] pci 0000:02:0b.0: BAR 14: assigned [io 0xc400-0xc4ff] [ 0.150680] pci 0000:02:0b.1: BAR 13: assigned [io 0xcc00-0xccff] [ 0.150687] pci 0000:02:0b.1: BAR 14: assigned [io 0x1000-0x10ff] [ 0.150693] pci 0000:02:0b.0: CardBus bridge to [bus 03-06] [ 0.150697] pci 0000:02:0b.0: bridge window [io 0xc000-0xc0ff] [ 0.150703] pci 0000:02:0b.0: bridge window [io 0xc400-0xc4ff] [ 0.150709] pci 0000:02:0b.0: bridge window [mem 0x40000000-0x43ffffff pref] [ 0.150715] pci 0000:02:0b.0: bridge window [mem 0x50000000-0x53ffffff] [ 0.150721] pci 0000:02:0b.1: CardBus bridge to [bus 07-0a] [ 0.150724] pci 0000:02:0b.1: bridge window [io 0xcc00-0xccff] [ 0.150730] pci 0000:02:0b.1: bridge window [io 0x1000-0x10ff] [ 0.150736] pci 0000:02:0b.1: bridge window [mem 0x44000000-0x47ffffff pref] [ 0.150742] pci 0000:02:0b.1: bridge window [mem 0x58000000-0x5bffffff] [ 0.150748] pci 0000:00:1e.0: PCI bridge to [bus 02] [ 0.150752] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.150760] pci 0000:00:1e.0: bridge window [mem 0xffd00000-0xffdfffff] [ 0.150766] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x47ffffff pref] [ 0.150775] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.150779] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.150783] pci_bus 0000:01: resource 0 [io 0x9000-0xbfff] [ 0.150787] pci_bus 0000:01: resource 1 [mem 0xffc00000-0xffcfffff] [ 0.150791] pci_bus 0000:01: resource 2 [mem 0xceb00000-0xdeafffff pref] [ 0.150795] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.150799] pci_bus 0000:02: resource 1 [mem 0xffd00000-0xffdfffff] [ 0.150803] pci_bus 0000:02: resource 2 [mem 0x40000000-0x47ffffff pref] [ 0.150807] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.150811] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.150815] pci_bus 0000:03: resource 0 [io 0xc000-0xc0ff] [ 0.150818] pci_bus 0000:03: resource 1 [io 0xc400-0xc4ff] [ 0.150822] pci_bus 0000:03: resource 2 [mem 0x40000000-0x43ffffff pref] [ 0.150826] pci_bus 0000:03: resource 3 [mem 0x50000000-0x53ffffff] [ 0.150830] pci_bus 0000:07: resource 0 [io 0xcc00-0xccff] [ 0.150834] pci_bus 0000:07: resource 1 [io 0x1000-0x10ff] [ 0.150838] pci_bus 0000:07: resource 2 [mem 0x44000000-0x47ffffff pref] [ 0.150841] pci_bus 0000:07: resource 3 [mem 0x58000000-0x5bffffff] [ 0.150904] NET: Registered protocol family 2 [ 0.151231] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.151278] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.151349] TCP: Hash tables configured (established 8192 bind 8192) [ 0.151410] TCP: reno registered [ 0.151415] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.151437] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.151557] NET: Registered protocol family 1 [ 0.151826] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.151830] PCI: setting IRQ 11 as level-triggered [ 0.151830] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.151830] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.151830] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.151830] pci 0000:01:00.0: Boot video device [ 0.151830] PCI: CLS 64 bytes, default 64 [ 0.151830] Trying to unpack rootfs image as initramfs... [ 0.741699] Freeing initrd memory: 17932K (f5cea000 - f6e6d000) [ 0.742024] Scanning for low memory corruption every 60 seconds [ 0.742547] Initialise system trusted keyring [ 0.742631] audit: initializing netlink socket (disabled) [ 0.742656] type=2000 audit(1389647837.739:1): initialized [ 0.778731] bounce pool size: 64 pages [ 0.778757] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.781234] zbud: loaded [ 0.781347] VFS: Disk quotas dquot_6.5.2 [ 0.781433] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.782267] fuse init (API version 7.22) [ 0.782400] msgmni has been set to 1738 [ 0.782505] Key type big_key registered [ 0.782891] Key type asymmetric registered [ 0.782895] Asymmetric key parser 'x509' registered [ 0.782956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.782996] io scheduler noop registered [ 0.782999] io scheduler deadline registered (default) [ 0.783048] io scheduler cfq registered [ 0.783259] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.783286] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.783639] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes, mapped to 0xf8480000 [ 0.783645] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=1024x768x32, linelength=4096 [ 0.843215] Console: switching to colour frame buffer device 128x48 [ 0.902632] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 0.902659] intel_idle: does not run on family 6 model 13 [ 0.906571] ACPI: AC Adapter [AC0] (on-line) [ 0.906680] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:11/PNP0C0D:00/input/input0 [ 0.906706] ACPI: Lid Switch [LID] [ 0.906778] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.906785] ACPI: Sleep Button [SLPB] [ 0.906852] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.906857] ACPI: Power Button [PWRB] [ 0.906924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.906929] ACPI: Power Button [PWRF] [ 0.907181] tsc: Marking TSC unstable due to TSC halts in idle [ 0.907193] ACPI: acpi_idle registered with cpuidle [ 0.907566] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.907569] ACPI: Thermal Zone [THRM] (75 C) [ 0.907729] GHES: HEST is not enabled! [ 0.908076] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.910372] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 0.910377] PCI: setting IRQ 9 as level-triggered [ 0.910652] Linux agpgart interface v0.103 [ 0.910756] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 0.924091] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.925950] isapnp: Scanning for PnP cards... [ 0.975888] brd: module loaded [ 0.977213] loop: module loaded [ 0.977443] ata_piix 0000:00:1f.1: version 2.13 [ 0.977457] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.979553] scsi0 : ata_piix [ 0.979659] scsi1 : ata_piix [ 0.979724] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.979728] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.980361] libphy: Fixed MDIO Bus: probed [ 0.980546] tun: Universal TUN/TAP device driver, 1.6 [ 0.980549] tun: (C) 1999-2004 Max Krasnyansky [ 0.980625] PPP generic driver version 2.4.2 [ 0.980690] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.980697] ehci-pci: EHCI PCI platform driver [ 0.980824] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.980836] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.980855] ehci-pci 0000:00:1d.7: debug port 1 [ 0.984763] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.985315] ehci-pci 0000:00:1d.7: irq 11, io mem 0xffeffc00 [ 1.029034] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.029143] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.029147] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.029151] usb usb1: Product: EHCI Host Controller [ 1.029155] usb usb1: Manufacturer: Linux 3.13.0-2-generic ehci_hcd [ 1.029158] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.029416] hub 1-0:1.0: USB hub found [ 1.029430] hub 1-0:1.0: 6 ports detected [ 1.029690] ehci-platform: EHCI generic platform driver [ 1.029708] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.029711] ohci-pci: OHCI PCI platform driver [ 1.029728] ohci-platform: OHCI generic platform driver [ 1.029740] uhci_hcd: USB Universal Host Controller Interface driver [ 1.029851] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.029860] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.029886] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800 [ 1.029967] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.029971] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.029975] usb usb2: Product: UHCI Host Controller [ 1.029979] usb usb2: Manufacturer: Linux 3.13.0-2-generic uhci_hcd [ 1.029982] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.030134] hub 2-0:1.0: USB hub found [ 1.030147] hub 2-0:1.0: 2 ports detected [ 1.030356] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.030365] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.030390] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e880 [ 1.030464] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.030468] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.030471] usb usb3: Product: UHCI Host Controller [ 1.030475] usb usb3: Manufacturer: Linux 3.13.0-2-generic uhci_hcd [ 1.030478] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.030631] hub 3-0:1.0: USB hub found [ 1.030642] hub 3-0:1.0: 2 ports detected [ 1.030842] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.030851] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.030877] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000ec00 [ 1.030944] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.030948] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.030951] usb usb4: Product: UHCI Host Controller [ 1.030955] usb usb4: Manufacturer: Linux 3.13.0-2-generic uhci_hcd [ 1.030959] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.031107] hub 4-0:1.0: USB hub found [ 1.031119] hub 4-0:1.0: 2 ports detected [ 1.031372] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.125651] i8042: Detected active multiplexing controller, rev 1.0 [ 1.126465] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.126475] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.126568] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.126604] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.126638] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.126813] mousedev: PS/2 mouse device common for all mice [ 1.127296] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.127363] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram [ 1.127877] device-mapper: uevent: version 1.0.3 [ 1.128275] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.128403] platform eisa.0: Probing EISA bus 0 [ 1.128515] platform eisa.0: EISA: Detected 0 cards [ 1.128567] cpufreq-nforce2: No nForce2 chipset. [ 1.128579] ledtrig-cpu: registered to indicate activity on CPUs [ 1.129209] TCP: cubic registered [ 1.129391] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.129590] ACPI: Battery Slot [BAT0] (battery present) [ 1.130140] NET: Registered protocol family 10 [ 1.130477] NET: Registered protocol family 17 [ 1.130495] Key type dns_resolver registered [ 1.176305] ata1.00: ATA-6: TOSHIBA MK6025GAS, KA200A, max UDMA/100 [ 1.176310] ata1.00: 117210240 sectors, multi 16: LBA [ 1.176424] ata2.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102M3, max UDMA/133 [ 1.176428] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/1) [ 1.176432] ata2.00: limited to UDMA/33 due to 40-wire cable [ 1.176940] Using IPI No-Shortcut mode [ 1.177064] Loading compiled-in X.509 certificates [ 1.270613] Loaded X.509 cert 'Magrathea: Glacier signing key: e8a96bae07c6d42897bdd562eadfd89f8efbec06' [ 1.270637] registered taskstats version 1 [ 1.274034] Key type trusted registered [ 1.276905] Key type encrypted registered [ 1.279744] AppArmor: AppArmor sha1 policy hashing enabled [ 1.279750] IMA: No TPM chip found, activating TPM-bypass! [ 1.280137] Magic number: 14:891:297 [ 1.280283] rtc_cmos 00:01: setting system clock to 2014-01-13 21:17:18 UTC (1389647838) [ 1.280381] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.280384] EDD information not available. [ 1.280429] PM: Hibernation image not present or could not be loaded. [ 1.280728] ata1.00: configured for UDMA/100 [ 1.324528] isapnp: No Plug & Play device found [ 1.324541] ata2.00: configured for UDMA/33 [ 1.324741] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6025GA KA20 PQ: 0 ANSI: 5 [ 1.325031] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.325117] sd 0:0:0:0: [sda] Write Protect is off [ 1.325122] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.325159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.325556] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.325753] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5 [ 1.325947] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.326038] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.326149] sd 1:0:0:0: [sdb] Write Protect is off [ 1.326153] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.326191] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.327614] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 1.328135] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.392064] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 1.416398] sda: sda1 sda2 < sda5 sda6 > [ 1.416872] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.417506] Freeing unused kernel memory: 872K (c199b000 - c1a75000) [ 1.417583] Write protecting the kernel text: 6460k [ 1.417691] Write protecting the kernel read-only data: 2736k [ 1.417693] NX-protecting the kernel data: 5828k [ 1.436258] systemd-udevd[94]: starting version 204 [ 1.526310] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.526350] 8139cp 0000:02:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.545082] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.545894] 8139too 0000:02:0a.0 eth0: RealTek RTL8139 at 0x0001c800, 00:03:0d:27:0f:4f, IRQ 9 [ 1.555525] usb 1-2: New USB device found, idVendor=13fe, idProduct=3623 [ 1.555532] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.555536] usb 1-2: Product: silicon-power [ 1.555539] usb 1-2: Manufacturer: [ 1.555543] usb 1-2: SerialNumber: 10020759E6A30800B18600C5 [ 1.656107] firewire_ohci 0000:02:09.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.720539] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1.720642] scsi2 : usb-storage 1-2:1.0 [ 1.721025] usbcore: registered new interface driver usb-storage [ 2.109993] EXT4-fs (sda5): INFO: recovery required on readonly filesystem [ 2.110000] EXT4-fs (sda5): write access will be enabled during recovery [ 2.156172] firewire_core 0000:02:09.0: created device fw0: GUID 00030d0025555a9c, S400 [ 2.721250] scsi 2:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 6 [ 2.722708] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.723603] sd 2:0:0:0: [sdc] 7825408 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 2.724222] sd 2:0:0:0: [sdc] Write Protect is off [ 2.724228] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 2.724838] sd 2:0:0:0: [sdc] No Caching mode page found [ 2.724842] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 2.728470] sd 2:0:0:0: [sdc] No Caching mode page found [ 2.728476] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 2.729365] sdc: sdc1 [ 2.732466] sd 2:0:0:0: [sdc] No Caching mode page found [ 2.732472] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 2.732478] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 2.774199] random: nonblocking pool is initialized [ 5.891457] EXT4-fs (sda5): orphan cleanup on readonly fs [ 5.907333] EXT4-fs (sda5): 9 orphan inodes deleted [ 5.907339] EXT4-fs (sda5): recovery complete [ 6.005159] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 9.020834] Adding 1048572k swap on /dev/sda6. Priority:-1 extents:1 across:1048572k FS [ 10.310031] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.655355] systemd-udevd[260]: starting version 204 [ 11.986635] lp: driver loaded but no devices found [ 12.773226] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 13.777761] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.777813] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 13.779553] acpi device:14: registered as cooling_device1 [ 13.781251] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input9 [ 13.851366] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.942652] intel_rng: FWH not detected [ 14.297229] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251) [ 14.297242] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.297247] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPBA 1 (20131115/utaddress-251) [ 14.297253] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.297255] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPBA 1 (20131115/utaddress-251) [ 14.297261] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.297263] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 14.828211] yenta_cardbus 0000:02:0b.0: enabling device (0000 -> 0003) [ 14.828342] yenta_cardbus 0000:02:0b.0: CardBus bridge found [1734:1080] [ 14.828363] yenta_cardbus 0000:02:0b.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off' [ 14.956841] yenta_cardbus 0000:02:0b.0: ISA IRQ mask 0x0000, PCI irq 11 [ 14.956850] yenta_cardbus 0000:02:0b.0: Socket status: 30000006 [ 14.956856] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 14.956869] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge window: [io 0xc000-0xcfff] [ 14.956874] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xcfff: [ 14.958262] excluding 0xc000-0xc0ff 0xc400-0xc4ff 0xc800-0xc8ff 0xcc00-0xccff [ 14.965439] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge window: [mem 0xffd00000-0xffdfffff] [ 14.965446] pcmcia_socket pcmcia_socket0: cs: memory probe 0xffd00000-0xffdfffff: [ 14.965459] excluding 0xffdf0000-0xffdfffff [ 14.965465] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x47ffffff pref] [ 14.965469] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x47ffffff: [ 14.965486] excluding 0x40000000-0x47ffffff [ 14.971912] yenta_cardbus 0000:02:0b.1: enabling device (0000 -> 0003) [ 14.972075] yenta_cardbus 0000:02:0b.1: CardBus bridge found [1734:1080] [ 15.077272] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x0 [ 15.101212] yenta_cardbus 0000:02:0b.1: ISA IRQ mask 0x0000, PCI irq 11 [ 15.101220] yenta_cardbus 0000:02:0b.1: Socket status: 30000006 [ 15.101226] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 15.101240] yenta_cardbus 0000:02:0b.1: pcmcia: parent PCI bridge window: [io 0xc000-0xcfff] [ 15.101246] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc000-0xcfff: [ 15.102633] excluding 0xc000-0xc0ff 0xc400-0xc4ff 0xc800-0xc8ff 0xcc00-0xccff [ 15.106794] yenta_cardbus 0000:02:0b.1: pcmcia: parent PCI bridge window: [mem 0xffd00000-0xffdfffff] [ 15.106799] pcmcia_socket pcmcia_socket1: cs: memory probe 0xffd00000-0xffdfffff: [ 15.106812] excluding 0xffdf0000-0xffdfffff [ 15.106818] yenta_cardbus 0000:02:0b.1: pcmcia: parent PCI bridge window: [mem 0x40000000-0x47ffffff pref] [ 15.106822] pcmcia_socket pcmcia_socket1: cs: memory probe 0x40000000-0x47ffffff: [ 15.106839] excluding 0x40000000-0x47ffffff [ 15.287655] [drm] Initialized drm 1.1.0 20060810 [ 15.288139] psmouse serio2: synaptics: Touchpad model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a/0x0, board id: 3655, fw id: 25282 [ 15.577150] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11 [ 15.737218] platform microcode: Direct firmware load failed with error -2 [ 15.737225] platform microcode: Falling back to user helper [ 15.861215] cfg80211: Calling CRDA to update world regulatory domain [ 15.948258] lib80211: common routines for IEEE802.11 drivers [ 15.948266] lib80211_crypt: registered algorithm 'NULL' [ 16.067760] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 16.080114] libipw: 802.11 data/management/control stack, git-1.1.13 [ 16.080120] libipw: Copyright (C) 2004-2005 Intel Corporation [ 16.163611] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 16.163619] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 16.163900] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 16.535018] ipw2200: Radio Frequency Kill Switch is On: [ 16.535018] Kill switch must be turned off for wireless networking to work. [ 16.623666] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: [ 16.624739] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 [ 16.625519] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: [ 16.625771] excluding 0x3f0-0x3f7 0x400-0x47f 0x4d0-0x4d7 [ 16.625983] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: [ 16.626357] excluding 0x860-0x86f [ 16.626578] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: [ 16.627258] clean. [ 16.627282] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 16.627291] excluding 0xc0000-0xd3fff 0xe0000-0xfffff [ 16.627323] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 16.627344] clean. [ 16.627365] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 16.627385] clean. [ 16.627406] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: [ 16.628114] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: [ 16.629149] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 [ 16.629920] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: [ 16.630170] excluding 0x3f0-0x3f7 0x400-0x47f 0x4d0-0x4d7 [ 16.630382] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: [ 16.630754] excluding 0x860-0x86f [ 16.630974] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: [ 16.631651] clean. [ 16.631675] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: [ 16.631682] excluding 0xc0000-0xd3fff 0xe0000-0xfffff [ 16.631714] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: [ 16.631735] clean. [ 16.631755] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: [ 16.631776] clean. [ 16.631797] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: [ 16.642188] clean. [ 16.642356] clean. [ 16.646435] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 16.676773] [drm] radeon kernel modesetting enabled. [ 16.676876] checking generic (d0000000 300000) vs hw (d0000000 8000000) [ 16.676880] fb: conflicting fb hw usage radeondrmfb vs simple - removing generic driver [ 16.676984] Console: switching to colour dummy device 80x25 [ 16.681196] [drm] initializing kernel modesetting (RV350 0x1002:0x4E52 0x1734:0x1080). [ 16.681229] [drm] register mmio base: 0xFFCF0000 [ 16.681232] [drm] register mmio size: 65536 [ 16.683713] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 16.683727] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 16.683761] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 16.683794] radeon 0000:01:00.0: GTT: 256M 0xE0000000 - 0xEFFFFFFF [ 16.683799] [drm] Generation 2 PCI interface, using max accessible memory [ 16.683806] radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used) [ 16.684125] [drm] Detected VRAM RAM=128M, BAR=128M [ 16.684132] [drm] RAM width 128bits DDR [ 16.684247] [TTM] Zone kernel: Available graphics memory: 445490 kiB [ 16.684250] [TTM] Zone highmem: Available graphics memory: 512982 kiB [ 16.684252] [TTM] Initializing pool allocator [ 16.684260] [TTM] Initializing DMA pool allocator [ 16.684298] [drm] radeon: 128M of VRAM memory ready [ 16.684301] [drm] radeon: 256M of GTT memory ready. [ 16.684344] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 16.685386] radeon 0000:01:00.0: WB disabled [ 16.685399] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0xf844c000 [ 16.685403] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 16.685406] [drm] Driver supports precise vblank timestamp query. [ 16.685428] [drm] radeon: irq initialized. [ 16.685450] [drm] Loading R300 Microcode [ 17.052448] [drm] radeon: ring at 0x00000000E0001000 [ 17.053592] [drm] ring test succeeded in 1 usecs [ 17.054004] [drm] ib test succeeded in 0 usecs [ 17.055333] [drm] Panel ID String: Samsung LTN154X1 WXGA [ 17.055338] [drm] Panel Size 1280x800 [ 17.075699] [drm] radeon legacy LVDS backlight initialized [ 17.075704] [drm] Radeon Display Connectors [ 17.075707] [drm] Connector 0: [ 17.075709] [drm] VGA-1 [ 17.075713] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 17.075715] [drm] Encoders: [ 17.075717] [drm] CRT1: INTERNAL_DAC1 [ 17.075719] [drm] Connector 1: [ 17.075721] [drm] LVDS-1 [ 17.075723] [drm] Encoders: [ 17.075725] [drm] LCD1: INTERNAL_LVDS [ 17.075727] [drm] Connector 2: [ 17.075729] [drm] SVIDEO-1 [ 17.075731] [drm] Encoders: [ 17.075733] [drm] TV1: INTERNAL_DAC2 [ 17.076026] [drm] radeon: power management initialized [ 17.142513] [drm] fb mappable at 0xD0040000 [ 17.142519] [drm] vram apper at 0xD0000000 [ 17.142521] [drm] size 4096000 [ 17.142523] [drm] fb depth is 24 [ 17.142525] [drm] pitch is 5120 [ 17.142812] fbcon: radeondrmfb (fb0) is primary device [ 17.164627] intel8x0_measure_ac97_clock: measured 58457 usecs (2816 samples) [ 17.164629] intel8x0: clocking to 48000 [ 17.194761] Console: switching to colour frame buffer device 160x50 [ 17.218512] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 17.218516] radeon 0000:01:00.0: registered panic notifier [ 17.219900] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0 [ 18.305228] type=1400 audit(1389647855.522:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=463 comm="apparmor_parser" [ 18.305244] type=1400 audit(1389647855.522:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=463 comm="apparmor_parser" [ 18.305253] type=1400 audit(1389647855.522:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=463 comm="apparmor_parser" [ 18.306369] type=1400 audit(1389647855.522:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=463 comm="apparmor_parser" [ 18.306383] type=1400 audit(1389647855.522:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=463 comm="apparmor_parser" [ 18.306962] type=1400 audit(1389647855.522:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=463 comm="apparmor_parser" [ 18.308759] type=1400 audit(1389647855.526:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=391 comm="apparmor_parser" [ 18.308775] type=1400 audit(1389647855.526:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=391 comm="apparmor_parser" [ 18.308783] type=1400 audit(1389647855.526:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=391 comm="apparmor_parser" [ 18.309903] type=1400 audit(1389647855.526:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=391 comm="apparmor_parser" [ 18.520799] cfg80211: World regulatory domain updated: [ 18.520808] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 18.520812] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.520815] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.520818] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.520821] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.520824] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.959407] init: failsafe main process (486) killed by TERM signal [ 23.340462] audit_printk_skb: 138 callbacks suppressed [ 23.340469] type=1400 audit(1389647860.558:58): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=723 comm="apparmor_parser" [ 23.668190] Bluetooth: Core ver 2.17 [ 23.668234] NET: Registered protocol family 31 [ 23.668236] Bluetooth: HCI device and connection manager initialized [ 23.670971] Bluetooth: HCI socket layer initialized [ 23.670980] Bluetooth: L2CAP socket layer initialized [ 23.670992] Bluetooth: SCO socket layer initialized [ 23.755730] init: avahi-cups-reload main process (735) terminated with status 1 [ 23.789036] ppdev: user-space parallel port driver [ 23.919393] Bluetooth: RFCOMM TTY layer initialized [ 23.919417] Bluetooth: RFCOMM socket layer initialized [ 23.919427] Bluetooth: RFCOMM ver 1.11 [ 24.089660] type=1400 audit(1389647861.306:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=784 comm="apparmor_parser" [ 24.089682] type=1400 audit(1389647861.306:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=784 comm="apparmor_parser" [ 24.090988] type=1400 audit(1389647861.306:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=784 comm="apparmor_parser" [ 24.102842] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.102850] Bluetooth: BNEP filters: protocol multicast [ 24.102867] Bluetooth: BNEP socket layer initialized [ 27.668562] init: alsa-restore main process (998) terminated with status 99 [ 30.421890] 8139too 0000:02:0a.0 eth0: link down [ 30.421973] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.422460] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.574506] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 48.484062] usb 2-1: new low-speed USB device number 2 using uhci_hcd [ 48.657019] usb 2-1: New USB device found, idVendor=09da, idProduct=000a [ 48.657027] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 48.657031] usb 2-1: Product: USB Mouse [ 48.657035] usb 2-1: Manufacturer: A4Tech [ 49.367640] hidraw: raw HID events driver (C) Jiri Kosina [ 49.531975] usbcore: registered new interface driver usbhid [ 49.531983] usbhid: USB HID core driver [ 49.637801] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input14 [ 49.645000] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1/input0 [ 141.197195] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 141.309998] JFS: nTxBlock = 8015, nTxLock = 64122 [ 141.446620] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 141.571916] QNX4 filesystem 0.2.3 registered. [ 141.668300] xor: measuring software checksum speed [ 141.708009] pIII_sse : 4213.000 MB/sec [ 141.748008] prefetch64-sse: 4581.000 MB/sec [ 141.748011] xor: using function: prefetch64-sse (4581.000 MB/sec) [ 141.848034] raid6: mmxx1 1684 MB/s [ 141.916011] raid6: mmxx2 1909 MB/s [ 141.984050] raid6: sse1x1 1209 MB/s [ 142.052035] raid6: sse1x2 1937 MB/s [ 142.120028] raid6: sse2x1 2109 MB/s [ 142.188024] raid6: sse2x2 2370 MB/s [ 142.188027] raid6: using algorithm sse2x2 (2370 MB/s) [ 142.188029] raid6: using intx1 recovery algorithm [ 142.328787] bio: create slab at 1 [ 142.340103] Btrfs loaded [ 151.542184] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 151.542192] ata1.00: BMDMA stat 0x25 [ 151.542198] ata1.00: failed command: READ DMA [ 151.542207] ata1.00: cmd c8/00:40:ff:a7:64/00:00:00:00:00/e1 tag 0 dma 32768 in [ 151.542207] res 51/40:20:1f:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 151.542212] ata1.00: status: { DRDY ERR } [ 151.542215] ata1.00: error: { UNC } [ 151.556268] ata1.00: configured for UDMA/100 [ 151.556306] sd 0:0:0:0: [sda] Unhandled sense code [ 151.556310] sd 0:0:0:0: [sda] [ 151.556312] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 151.556316] sd 0:0:0:0: [sda] [ 151.556319] Sense Key : Medium Error [current] [descriptor] [ 151.556324] Descriptor sense data with sense descriptors (in hex): [ 151.556326] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 151.556338] 01 64 a8 1f [ 151.556344] sd 0:0:0:0: [sda] [ 151.556350] Add. Sense: Unrecovered read error - auto reallocate failed [ 151.556353] sd 0:0:0:0: [sda] CDB: [ 151.556356] Read(10): 28 00 01 64 a7 ff 00 00 40 00 [ 151.556367] end_request: I/O error, dev sda, sector 23373855 [ 151.556372] Buffer I/O error on device sda1, logical block 11686896 [ 151.556376] Buffer I/O error on device sda1, logical block 11686897 [ 151.556379] Buffer I/O error on device sda1, logical block 11686898 [ 151.556382] Buffer I/O error on device sda1, logical block 11686899 [ 151.556385] Buffer I/O error on device sda1, logical block 11686900 [ 151.556388] Buffer I/O error on device sda1, logical block 11686901 [ 151.556391] Buffer I/O error on device sda1, logical block 11686902 [ 151.556394] Buffer I/O error on device sda1, logical block 11686903 [ 151.556398] Buffer I/O error on device sda1, logical block 11686904 [ 151.556401] Buffer I/O error on device sda1, logical block 11686905 [ 151.556414] ata1: EH complete [ 159.972353] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 159.972572] ata1.00: BMDMA stat 0x25 [ 159.972693] ata1.00: failed command: READ DMA [ 159.972843] ata1.00: cmd c8/00:08:1f:a8:64/00:00:00:00:00/e1 tag 0 dma 4096 in [ 159.972843] res 51/40:08:1f:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 159.973345] ata1.00: status: { DRDY ERR } [ 159.973476] ata1.00: error: { UNC } [ 159.988270] ata1.00: configured for UDMA/100 [ 159.988295] sd 0:0:0:0: [sda] Unhandled sense code [ 159.988299] sd 0:0:0:0: [sda] [ 159.988302] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 159.988305] sd 0:0:0:0: [sda] [ 159.988308] Sense Key : Medium Error [current] [descriptor] [ 159.988313] Descriptor sense data with sense descriptors (in hex): [ 159.988315] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 159.988327] 01 64 a8 1f [ 159.988333] sd 0:0:0:0: [sda] [ 159.988339] Add. Sense: Unrecovered read error - auto reallocate failed [ 159.988342] sd 0:0:0:0: [sda] CDB: [ 159.988345] Read(10): 28 00 01 64 a8 1f 00 00 08 00 [ 159.988357] end_request: I/O error, dev sda, sector 23373855 [ 159.988552] quiet_error: 6 callbacks suppressed [ 159.988555] Buffer I/O error on device sda1, logical block 11686896 [ 159.988764] Buffer I/O error on device sda1, logical block 11686897 [ 159.988972] Buffer I/O error on device sda1, logical block 11686898 [ 159.989180] Buffer I/O error on device sda1, logical block 11686899 [ 159.989404] ata1: EH complete [ 168.459576] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 168.459797] ata1.00: BMDMA stat 0x25 [ 168.459918] ata1.00: failed command: READ DMA [ 168.460085] ata1.00: cmd c8/00:08:1f:a8:64/00:00:00:00:00/e1 tag 0 dma 4096 in [ 168.460085] res 51/40:08:1f:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 168.460590] ata1.00: status: { DRDY ERR } [ 168.460721] ata1.00: error: { UNC } [ 168.476280] ata1.00: configured for UDMA/100 [ 168.476305] sd 0:0:0:0: [sda] Unhandled sense code [ 168.476308] sd 0:0:0:0: [sda] [ 168.476311] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 168.476315] sd 0:0:0:0: [sda] [ 168.476317] Sense Key : Medium Error [current] [descriptor] [ 168.476322] Descriptor sense data with sense descriptors (in hex): [ 168.476324] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 168.476337] 01 64 a8 1f [ 168.476343] sd 0:0:0:0: [sda] [ 168.476348] Add. Sense: Unrecovered read error - auto reallocate failed [ 168.476352] sd 0:0:0:0: [sda] CDB: [ 168.476354] Read(10): 28 00 01 64 a8 1f 00 00 08 00 [ 168.476366] end_request: I/O error, dev sda, sector 23373855 [ 168.476560] Buffer I/O error on device sda1, logical block 11686896 [ 168.476769] Buffer I/O error on device sda1, logical block 11686897 [ 168.476977] Buffer I/O error on device sda1, logical block 11686898 [ 168.477185] Buffer I/O error on device sda1, logical block 11686899 [ 168.477414] ata1: EH complete [ 176.903992] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 176.904231] ata1.00: BMDMA stat 0x25 [ 176.904353] ata1.00: failed command: READ DMA [ 176.904502] ata1.00: cmd c8/00:08:1f:a8:64/00:00:00:00:00/e1 tag 0 dma 4096 in [ 176.904502] res 51/40:08:1f:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 176.905006] ata1.00: status: { DRDY ERR } [ 176.905138] ata1.00: error: { UNC } [ 176.920274] ata1.00: configured for UDMA/100 [ 176.920301] sd 0:0:0:0: [sda] Unhandled sense code [ 176.920305] sd 0:0:0:0: [sda] [ 176.920308] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 176.920311] sd 0:0:0:0: [sda] [ 176.920314] Sense Key : Medium Error [current] [descriptor] [ 176.920318] Descriptor sense data with sense descriptors (in hex): [ 176.920321] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 176.920333] 01 64 a8 1f [ 176.920339] sd 0:0:0:0: [sda] [ 176.920344] Add. Sense: Unrecovered read error - auto reallocate failed [ 176.920348] sd 0:0:0:0: [sda] CDB: [ 176.920351] Read(10): 28 00 01 64 a8 1f 00 00 08 00 [ 176.920363] end_request: I/O error, dev sda, sector 23373855 [ 176.920558] Buffer I/O error on device sda1, logical block 11686896 [ 176.920768] Buffer I/O error on device sda1, logical block 11686897 [ 176.920976] Buffer I/O error on device sda1, logical block 11686898 [ 176.921184] Buffer I/O error on device sda1, logical block 11686899 [ 176.921412] ata1: EH complete [ 185.462525] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 185.462746] ata1.00: BMDMA stat 0x25 [ 185.462869] ata1.00: failed command: READ DMA [ 185.463025] ata1.00: cmd c8/00:08:1f:a8:64/00:00:00:00:00/e1 tag 0 dma 4096 in [ 185.463025] res 51/40:08:1f:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 185.463528] ata1.00: status: { DRDY ERR } [ 185.463660] ata1.00: error: { UNC } [ 185.476280] ata1.00: configured for UDMA/100 [ 185.476305] sd 0:0:0:0: [sda] Unhandled sense code [ 185.476309] sd 0:0:0:0: [sda] [ 185.476312] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 185.476315] sd 0:0:0:0: [sda] [ 185.476318] Sense Key : Medium Error [current] [descriptor] [ 185.476322] Descriptor sense data with sense descriptors (in hex): [ 185.476324] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 185.476337] 01 64 a8 1f [ 185.476343] sd 0:0:0:0: [sda] [ 185.476348] Add. Sense: Unrecovered read error - auto reallocate failed [ 185.476352] sd 0:0:0:0: [sda] CDB: [ 185.476355] Read(10): 28 00 01 64 a8 1f 00 00 08 00 [ 185.476366] end_request: I/O error, dev sda, sector 23373855 [ 185.476560] Buffer I/O error on device sda1, logical block 11686896 [ 185.476769] Buffer I/O error on device sda1, logical block 11686897 [ 185.476977] Buffer I/O error on device sda1, logical block 11686898 [ 185.477185] Buffer I/O error on device sda1, logical block 11686899 [ 185.477411] ata1: EH complete [ 194.263535] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 194.263757] ata1.00: BMDMA stat 0x25 [ 194.263879] ata1.00: failed command: READ DMA [ 194.264046] ata1.00: cmd c8/00:04:cb:f9:66/00:00:00:00:00/e0 tag 0 dma 2048 in [ 194.264046] res 51/40:03:cc:f9:66/00:00:00:00:00/e0 Emask 0x9 (media error) [ 194.264550] ata1.00: status: { DRDY ERR } [ 194.264682] ata1.00: error: { UNC } [ 194.280282] ata1.00: configured for UDMA/100 [ 194.280306] sd 0:0:0:0: [sda] Unhandled sense code [ 194.280310] sd 0:0:0:0: [sda] [ 194.280313] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 194.280316] sd 0:0:0:0: [sda] [ 194.280319] Sense Key : Medium Error [current] [descriptor] [ 194.280323] Descriptor sense data with sense descriptors (in hex): [ 194.280326] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 194.280338] 00 66 f9 cc [ 194.280344] sd 0:0:0:0: [sda] [ 194.280350] Add. Sense: Unrecovered read error - auto reallocate failed [ 194.280353] sd 0:0:0:0: [sda] CDB: [ 194.280356] Read(10): 28 00 00 66 f9 cb 00 00 04 00 [ 194.280367] end_request: I/O error, dev sda, sector 6748620 [ 194.280556] Buffer I/O error on device sda1, logical block 3374278 [ 194.280764] Buffer I/O error on device sda1, logical block 3374279 [ 194.280988] ata1: EH complete [ 202.665137] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 202.665358] ata1.00: BMDMA stat 0x25 [ 202.665480] ata1.00: failed command: READ DMA [ 202.665630] ata1.00: cmd c8/00:04:cb:f9:66/00:00:00:00:00/e0 tag 0 dma 2048 in [ 202.665630] res 51/40:03:cc:f9:66/00:00:00:00:00/e0 Emask 0x9 (media error) [ 202.666134] ata1.00: status: { DRDY ERR } [ 202.666265] ata1.00: error: { UNC } [ 202.680291] ata1.00: configured for UDMA/100 [ 202.680319] sd 0:0:0:0: [sda] Unhandled sense code [ 202.680323] sd 0:0:0:0: [sda] [ 202.680326] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 202.680329] sd 0:0:0:0: [sda] [ 202.680332] Sense Key : Medium Error [current] [descriptor] [ 202.680336] Descriptor sense data with sense descriptors (in hex): [ 202.680339] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 202.680351] 00 66 f9 cc [ 202.680357] sd 0:0:0:0: [sda] [ 202.680363] Add. Sense: Unrecovered read error - auto reallocate failed [ 202.680366] sd 0:0:0:0: [sda] CDB: [ 202.680369] Read(10): 28 00 00 66 f9 cb 00 00 04 00 [ 202.680380] end_request: I/O error, dev sda, sector 6748620 [ 202.680571] Buffer I/O error on device sda1, logical block 3374278 [ 202.680779] Buffer I/O error on device sda1, logical block 3374279 [ 202.681009] ata1: EH complete [ 211.109526] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 211.109749] ata1.00: BMDMA stat 0x25 [ 211.109870] ata1.00: failed command: READ DMA [ 211.110020] ata1.00: cmd c8/00:04:cb:f9:66/00:00:00:00:00/e0 tag 0 dma 2048 in [ 211.110020] res 51/40:03:cc:f9:66/00:00:00:00:00/e0 Emask 0x9 (media error) [ 211.110524] ata1.00: status: { DRDY ERR } [ 211.110655] ata1.00: error: { UNC } [ 211.124305] ata1.00: configured for UDMA/100 [ 211.124329] sd 0:0:0:0: [sda] Unhandled sense code [ 211.124333] sd 0:0:0:0: [sda] [ 211.124336] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 211.124339] sd 0:0:0:0: [sda] [ 211.124342] Sense Key : Medium Error [current] [descriptor] [ 211.124346] Descriptor sense data with sense descriptors (in hex): [ 211.124349] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 211.124361] 00 66 f9 cc [ 211.124367] sd 0:0:0:0: [sda] [ 211.124373] Add. Sense: Unrecovered read error - auto reallocate failed [ 211.124376] sd 0:0:0:0: [sda] CDB: [ 211.124379] Read(10): 28 00 00 66 f9 cb 00 00 04 00 [ 211.124391] end_request: I/O error, dev sda, sector 6748620 [ 211.124582] Buffer I/O error on device sda1, logical block 3374278 [ 211.124791] Buffer I/O error on device sda1, logical block 3374279 [ 211.125015] ata1: EH complete [ 219.525389] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 219.525612] ata1.00: BMDMA stat 0x25 [ 219.525734] ata1.00: failed command: READ DMA [ 219.525884] ata1.00: cmd c8/00:04:cb:f9:66/00:00:00:00:00/e0 tag 0 dma 2048 in [ 219.525884] res 51/40:03:cc:f9:66/00:00:00:00:00/e0 Emask 0x9 (media error) [ 219.526388] ata1.00: status: { DRDY ERR } [ 219.526519] ata1.00: error: { UNC } [ 219.540301] ata1.00: configured for UDMA/100 [ 219.540321] sd 0:0:0:0: [sda] Unhandled sense code [ 219.540325] sd 0:0:0:0: [sda] [ 219.540329] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 219.540332] sd 0:0:0:0: [sda] [ 219.540335] Sense Key : Medium Error [current] [descriptor] [ 219.540339] Descriptor sense data with sense descriptors (in hex): [ 219.540342] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 219.540354] 00 66 f9 cc [ 219.540360] sd 0:0:0:0: [sda] [ 219.540366] Add. Sense: Unrecovered read error - auto reallocate failed [ 219.540369] sd 0:0:0:0: [sda] CDB: [ 219.540372] Read(10): 28 00 00 66 f9 cb 00 00 04 00 [ 219.540383] end_request: I/O error, dev sda, sector 6748620 [ 219.540572] Buffer I/O error on device sda1, logical block 3374278 [ 219.540780] Buffer I/O error on device sda1, logical block 3374279 [ 219.541003] ata1: EH complete [ 228.440491] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 228.440712] ata1.00: BMDMA stat 0x25 [ 228.440833] ata1.00: failed command: READ DMA [ 228.440983] ata1.00: cmd c8/00:02:1f:a8:64/00:00:00:00:00/e1 tag 0 dma 1024 in [ 228.440983] res 51/40:02:1f:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 228.441486] ata1.00: status: { DRDY ERR } [ 228.441618] ata1.00: error: { UNC } [ 228.456281] ata1.00: configured for UDMA/100 [ 228.456304] sd 0:0:0:0: [sda] Unhandled sense code [ 228.456308] sd 0:0:0:0: [sda] [ 228.456311] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 228.456314] sd 0:0:0:0: [sda] [ 228.456317] Sense Key : Medium Error [current] [descriptor] [ 228.456321] Descriptor sense data with sense descriptors (in hex): [ 228.456323] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 228.456336] 01 64 a8 1f [ 228.456342] sd 0:0:0:0: [sda] [ 228.456347] Add. Sense: Unrecovered read error - auto reallocate failed [ 228.456351] sd 0:0:0:0: [sda] CDB: [ 228.456353] Read(10): 28 00 01 64 a8 1f 00 00 02 00 [ 228.456365] end_request: I/O error, dev sda, sector 23373855 [ 228.456559] Buffer I/O error on device sda1, logical block 11686896 [ 228.456780] ata1: EH complete [ 236.799282] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 236.799290] ata1.00: BMDMA stat 0x25 [ 236.799295] ata1.00: failed command: READ DMA [ 236.799304] ata1.00: cmd c8/00:02:21:a8:64/00:00:00:00:00/e1 tag 0 dma 1024 in [ 236.799304] res 51/40:02:21:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 236.799309] ata1.00: status: { DRDY ERR } [ 236.799312] ata1.00: error: { UNC } [ 236.812290] ata1.00: configured for UDMA/100 [ 236.812313] sd 0:0:0:0: [sda] Unhandled sense code [ 236.812317] sd 0:0:0:0: [sda] [ 236.812320] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 236.812323] sd 0:0:0:0: [sda] [ 236.812326] Sense Key : Medium Error [current] [descriptor] [ 236.812330] Descriptor sense data with sense descriptors (in hex): [ 236.812333] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 236.812345] 01 64 a8 21 [ 236.812351] sd 0:0:0:0: [sda] [ 236.812357] Add. Sense: Unrecovered read error - auto reallocate failed [ 236.812360] sd 0:0:0:0: [sda] CDB: [ 236.812362] Read(10): 28 00 01 64 a8 21 00 00 02 00 [ 236.812374] end_request: I/O error, dev sda, sector 23373857 [ 236.812380] Buffer I/O error on device sda1, logical block 11686897 [ 236.812400] ata1: EH complete [ 245.186598] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 245.186605] ata1.00: BMDMA stat 0x25 [ 245.186610] ata1.00: failed command: READ DMA [ 245.186620] ata1.00: cmd c8/00:04:23:a8:64/00:00:00:00:00/e1 tag 0 dma 2048 in [ 245.186620] res 51/40:04:23:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 245.186624] ata1.00: status: { DRDY ERR } [ 245.186627] ata1.00: error: { UNC } [ 245.200315] ata1.00: configured for UDMA/100 [ 245.200346] sd 0:0:0:0: [sda] Unhandled sense code [ 245.200350] sd 0:0:0:0: [sda] [ 245.200353] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 245.200356] sd 0:0:0:0: [sda] [ 245.200359] Sense Key : Medium Error [current] [descriptor] [ 245.200363] Descriptor sense data with sense descriptors (in hex): [ 245.200365] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 245.200378] 01 64 a8 23 [ 245.200384] sd 0:0:0:0: [sda] [ 245.200389] Add. Sense: Unrecovered read error - auto reallocate failed [ 245.200393] sd 0:0:0:0: [sda] CDB: [ 245.200395] Read(10): 28 00 01 64 a8 23 00 00 04 00 [ 245.200407] end_request: I/O error, dev sda, sector 23373859 [ 245.200413] Buffer I/O error on device sda1, logical block 11686898 [ 245.200417] Buffer I/O error on device sda1, logical block 11686899 [ 245.200440] ata1: EH complete [ 253.616701] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 253.616708] ata1.00: BMDMA stat 0x25 [ 253.616713] ata1.00: failed command: READ DMA [ 253.616723] ata1.00: cmd c8/00:08:1f:a8:64/00:00:00:00:00/e1 tag 0 dma 4096 in [ 253.616723] res 51/40:08:1f:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 253.616727] ata1.00: status: { DRDY ERR } [ 253.616730] ata1.00: error: { UNC } [ 253.632304] ata1.00: configured for UDMA/100 [ 253.632332] sd 0:0:0:0: [sda] Unhandled sense code [ 253.632336] sd 0:0:0:0: [sda] [ 253.632339] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 253.632342] sd 0:0:0:0: [sda] [ 253.632345] Sense Key : Medium Error [current] [descriptor] [ 253.632350] Descriptor sense data with sense descriptors (in hex): [ 253.632352] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 253.632364] 01 64 a8 1f [ 253.632370] sd 0:0:0:0: [sda] [ 253.632376] Add. Sense: Unrecovered read error - auto reallocate failed [ 253.632379] sd 0:0:0:0: [sda] CDB: [ 253.632382] Read(10): 28 00 01 64 a8 1f 00 00 08 00 [ 253.632394] end_request: I/O error, dev sda, sector 23373855 [ 253.632399] Buffer I/O error on device sda1, logical block 11686896 [ 253.632403] Buffer I/O error on device sda1, logical block 11686897 [ 253.632407] Buffer I/O error on device sda1, logical block 11686898 [ 253.632410] Buffer I/O error on device sda1, logical block 11686899 [ 253.632433] ata1: EH complete [ 262.032533] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 262.032541] ata1.00: BMDMA stat 0x25 [ 262.032546] ata1.00: failed command: READ DMA [ 262.032555] ata1.00: cmd c8/00:08:1f:a8:64/00:00:00:00:00/e1 tag 0 dma 4096 in [ 262.032555] res 51/40:08:1f:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 262.032560] ata1.00: status: { DRDY ERR } [ 262.032563] ata1.00: error: { UNC } [ 262.048280] ata1.00: configured for UDMA/100 [ 262.048306] sd 0:0:0:0: [sda] Unhandled sense code [ 262.048309] sd 0:0:0:0: [sda] [ 262.048312] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 262.048316] sd 0:0:0:0: [sda] [ 262.048318] Sense Key : Medium Error [current] [descriptor] [ 262.048323] Descriptor sense data with sense descriptors (in hex): [ 262.048325] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 262.048338] 01 64 a8 1f [ 262.048344] sd 0:0:0:0: [sda] [ 262.048350] Add. Sense: Unrecovered read error - auto reallocate failed [ 262.048353] sd 0:0:0:0: [sda] CDB: [ 262.048356] Read(10): 28 00 01 64 a8 1f 00 00 08 00 [ 262.048367] end_request: I/O error, dev sda, sector 23373855 [ 262.048373] Buffer I/O error on device sda1, logical block 11686896 [ 262.048378] Buffer I/O error on device sda1, logical block 11686897 [ 262.048381] Buffer I/O error on device sda1, logical block 11686898 [ 262.048384] Buffer I/O error on device sda1, logical block 11686899 [ 262.048406] ata1: EH complete [ 270.491151] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 270.491158] ata1.00: BMDMA stat 0x25 [ 270.491163] ata1.00: failed command: READ DMA [ 270.491173] ata1.00: cmd c8/00:08:1f:a8:64/00:00:00:00:00/e1 tag 0 dma 4096 in [ 270.491173] res 51/40:08:1f:a8:64/00:00:00:00:00/e1 Emask 0x9 (media error) [ 270.491177] ata1.00: status: { DRDY ERR } [ 270.491180] ata1.00: error: { UNC } [ 270.504280] ata1.00: configured for UDMA/100 [ 270.504302] sd 0:0:0:0: [sda] Unhandled sense code [ 270.504306] sd 0:0:0:0: [sda] [ 270.504309] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 270.504312] sd 0:0:0:0: [sda] [ 270.504315] Sense Key : Medium Error [current] [descriptor] [ 270.504319] Descriptor sense data with sense descriptors (in hex): [ 270.504322] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 270.504334] 01 64 a8 1f [ 270.504340] sd 0:0:0:0: [sda] [ 270.504346] Add. Sense: Unrecovered read error - auto reallocate failed [ 270.504350] sd 0:0:0:0: [sda] CDB: [ 270.504352] Read(10): 28 00 01 64 a8 1f 00 00 08 00 [ 270.504363] end_request: I/O error, dev sda, sector 23373855 [ 270.504369] Buffer I/O error on device sda1, logical block 11686896 [ 270.504373] Buffer I/O error on device sda1, logical block 11686897 [ 270.504376] Buffer I/O error on device sda1, logical block 11686898 [ 270.504379] Buffer I/O error on device sda1, logical block 11686899 [ 270.504394] ata1: EH complete [ 278.964030] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 278.964038] ata1.00: BMDMA stat 0x25 [ 278.964043] ata1.00: failed command: READ DMA [ 278.964053] ata1.00: cmd c8/00:04:cb:f9:66/00:00:00:00:00/e0 tag 0 dma 2048 in [ 278.964053] res 51/40:03:cc:f9:66/00:00:00:00:00/e0 Emask 0x9 (media error) [ 278.964058] ata1.00: status: { DRDY ERR } [ 278.964061] ata1.00: error: { UNC } [ 278.980281] ata1.00: configured for UDMA/100 [ 278.980308] sd 0:0:0:0: [sda] Unhandled sense code [ 278.980312] sd 0:0:0:0: [sda] [ 278.980315] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 278.980318] sd 0:0:0:0: [sda] [ 278.980321] Sense Key : Medium Error [current] [descriptor] [ 278.980326] Descriptor sense data with sense descriptors (in hex): [ 278.980328] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 278.980341] 00 66 f9 cc [ 278.980347] sd 0:0:0:0: [sda] [ 278.980352] Add. Sense: Unrecovered read error - auto reallocate failed [ 278.980356] sd 0:0:0:0: [sda] CDB: [ 278.980358] Read(10): 28 00 00 66 f9 cb 00 00 04 00 [ 278.980370] end_request: I/O error, dev sda, sector 6748620 [ 278.980376] Buffer I/O error on device sda1, logical block 3374278 [ 278.980380] Buffer I/O error on device sda1, logical block 3374279 [ 278.980400] ata1: EH complete [ 287.379846] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 287.379853] ata1.00: BMDMA stat 0x25 [ 287.379858] ata1.00: failed command: READ DMA [ 287.379867] ata1.00: cmd c8/00:04:cb:f9:66/00:00:00:00:00/e0 tag 0 dma 2048 in [ 287.379867] res 51/40:03:cc:f9:66/00:00:00:00:00/e0 Emask 0x9 (media error) [ 287.379872] ata1.00: status: { DRDY ERR } [ 287.379875] ata1.00: error: { UNC } [ 287.396306] ata1.00: configured for UDMA/100 [ 287.396330] sd 0:0:0:0: [sda] Unhandled sense code [ 287.396334] sd 0:0:0:0: [sda] [ 287.396337] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 287.396340] sd 0:0:0:0: [sda] [ 287.396343] Sense Key : Medium Error [current] [descriptor] [ 287.396348] Descriptor sense data with sense descriptors (in hex): [ 287.396350] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 287.396362] 00 66 f9 cc [ 287.396368] sd 0:0:0:0: [sda] [ 287.396374] Add. Sense: Unrecovered read error - auto reallocate failed [ 287.396378] sd 0:0:0:0: [sda] CDB: [ 287.396380] Read(10): 28 00 00 66 f9 cb 00 00 04 00 [ 287.396392] end_request: I/O error, dev sda, sector 6748620 [ 287.396398] Buffer I/O error on device sda1, logical block 3374278 [ 287.396402] Buffer I/O error on device sda1, logical block 3374279 [ 287.396424] ata1: EH complete [ 295.866985] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 295.866992] ata1.00: BMDMA stat 0x25 [ 295.866998] ata1.00: failed command: READ DMA [ 295.867007] ata1.00: cmd c8/00:04:cb:f9:66/00:00:00:00:00/e0 tag 0 dma 2048 in [ 295.867007] res 51/40:03:cc:f9:66/00:00:00:00:00/e0 Emask 0x9 (media error) [ 295.867012] ata1.00: status: { DRDY ERR } [ 295.867015] ata1.00: error: { UNC } [ 295.880282] ata1.00: configured for UDMA/100 [ 295.880306] sd 0:0:0:0: [sda] Unhandled sense code [ 295.880310] sd 0:0:0:0: [sda] [ 295.880313] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 295.880316] sd 0:0:0:0: [sda] [ 295.880319] Sense Key : Medium Error [current] [descriptor] [ 295.880324] Descriptor sense data with sense descriptors (in hex): [ 295.880326] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 295.880338] 00 66 f9 cc [ 295.880344] sd 0:0:0:0: [sda] [ 295.880350] Add. Sense: Unrecovered read error - auto reallocate failed [ 295.880354] sd 0:0:0:0: [sda] CDB: [ 295.880356] Read(10): 28 00 00 66 f9 cb 00 00 04 00 [ 295.880368] end_request: I/O error, dev sda, sector 6748620 [ 295.880373] Buffer I/O error on device sda1, logical block 3374278 [ 295.880378] Buffer I/O error on device sda1, logical block 3374279 [ 295.880400] ata1: EH complete [ 304.268523] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 304.268530] ata1.00: BMDMA stat 0x25 [ 304.268535] ata1.00: failed command: READ DMA [ 304.268545] ata1.00: cmd c8/00:04:cb:f9:66/00:00:00:00:00/e0 tag 0 dma 2048 in [ 304.268545] res 51/40:03:cc:f9:66/00:00:00:00:00/e0 Emask 0x9 (media error) [ 304.268549] ata1.00: status: { DRDY ERR } [ 304.268552] ata1.00: error: { UNC } [ 304.284280] ata1.00: configured for UDMA/100 [ 304.284304] sd 0:0:0:0: [sda] Unhandled sense code [ 304.284308] sd 0:0:0:0: [sda] [ 304.284311] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 304.284314] sd 0:0:0:0: [sda] [ 304.284317] Sense Key : Medium Error [current] [descriptor] [ 304.284321] Descriptor sense data with sense descriptors (in hex): [ 304.284324] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 304.284336] 00 66 f9 cc [ 304.284342] sd 0:0:0:0: [sda] [ 304.284348] Add. Sense: Unrecovered read error - auto reallocate failed [ 304.284351] sd 0:0:0:0: [sda] CDB: [ 304.284354] Read(10): 28 00 00 66 f9 cb 00 00 04 00 [ 304.284365] end_request: I/O error, dev sda, sector 6748620 [ 304.284371] Buffer I/O error on device sda1, logical block 3374278 [ 304.284375] Buffer I/O error on device sda1, logical block 3374279 [ 304.284397] ata1: EH complete [ 400.119489] i2c /dev entries driver [ 503.877092] type=1400 audit(1389648341.095:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3924 comm="apparmor_parser" [ 503.877114] type=1400 audit(1389648341.095:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3924 comm="apparmor_parser" [ 503.879707] type=1400 audit(1389648341.095:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3924 comm="apparmor_parser" [ 1164.838411] Thunar[1215]: segfault at 0 ip b6bb39c6 sp bf8fe970 error 4 in libglib-2.0.so.0.3902.0[b6b51000+103000] [ 1208.588972] 8139too 0000:02:0a.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 1208.589009] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1358.444327] perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000