[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-24-generic (buildd@yellow) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 (Ubuntu 3.2.0-24.37-generic 3.2.14) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-24-generic root=/dev/mapper/bailey--pc2-root ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fff0000 (usable) [ 0.000000] BIOS-e820: 000000006fff0000 - 000000006fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fff3000 - 0000000070000000 (ACPI data) [ 0.000000] BIOS-e820: 0000000070000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: Acer Aspire E380/EM61SM/EM61PM , BIOS R01-B4 02/09/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x6fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f3c90] f3c90 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000006fff0000 [ 0.000000] 0000000000 - 006fe00000 page 2M [ 0.000000] 006fe00000 - 006fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 6fff0000 @ 1fffc000-20000000 [ 0.000000] RAMDISK: 363d4000 - 371e2000 [ 0.000000] ACPI: RSDP 00000000000f8370 00014 (v00 ACRSYS) [ 0.000000] ACPI: RSDT 000000006fff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000006fff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000006fff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000006fff0000 00040 [ 0.000000] ACPI: SSDT 000000006fff95c0 00248 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 000000006fff9880 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098) [ 0.000000] ACPI: SLIC 000000006fff9900 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001) [ 0.000000] ACPI: MCFG 000000006fff9ac0 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000006fff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000006fff0000 [ 0.000000] Initmem setup node 0 0000000000000000-000000006fff0000 [ 0.000000] NODE_DATA [000000006ffeb000 - 000000006ffeffff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006da00000-ffff88006f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0006fff0 [ 0.000000] On node 0 totalpages: 458623 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7104 pages used for memmap [ 0.000000] DMA32 zone: 447536 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88006fc00000 s83072 r8192 d23424 u1048576 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 451450 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-24-generic root=/dev/mapper/bailey--pc2-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 80000000 size 32 MB [ 0.000000] Aperture too small (32 MB) than (64 MB) [ 0.000000] Memory: 1775376k/1834944k available (6566k kernel code, 452k absent, 59116k reserved, 6637k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 14680064 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2310.367 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4620.73 BogoMIPS (lpj=9241468) [ 0.004011] pid_max: default: 32768 minimum: 301 [ 0.004040] Security Framework initialized [ 0.004060] AppArmor: AppArmor initialized [ 0.004061] Yama: becoming mindful. [ 0.004348] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005687] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.008563] Mount-cache hash table entries: 256 [ 0.008725] Initializing cgroup subsys cpuacct [ 0.008732] Initializing cgroup subsys memory [ 0.008742] Initializing cgroup subsys devices [ 0.008744] Initializing cgroup subsys freezer [ 0.008747] Initializing cgroup subsys blkio [ 0.008755] Initializing cgroup subsys perf_event [ 0.008789] tseg: 0000000000 [ 0.008805] CPU: Physical Processor ID: 0 [ 0.008806] CPU: Processor Core ID: 0 [ 0.008809] mce: CPU supports 5 MCE banks [ 0.008821] using AMD E400 aware idle routine [ 0.010678] ACPI: Core revision 20110623 [ 0.016014] ftrace: allocating 27049 entries in 107 pages [ 0.024608] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064303] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 [ 0.068003] Performance Events: AMD PMU driver. [ 0.068003] ... version: 0 [ 0.068003] ... bit width: 48 [ 0.068003] ... generic registers: 4 [ 0.068003] ... value mask: 0000ffffffffffff [ 0.068003] ... max period: 00007fffffffffff [ 0.068003] ... fixed-purpose events: 0 [ 0.068003] ... event mask: 000000000000000f [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.068003] Booting Node 0, Processors #1 Ok. [ 0.068003] smpboot cpu 1: start_ip = 9a000 [ 0.152125] NMI watchdog enabled, takes one hw-pmu counter. [ 0.152153] Brought up 2 CPUs [ 0.152156] Total of 2 processors activated (9241.39 BogoMIPS). [ 0.152775] devtmpfs: initialized [ 0.153609] EVM: security.selinux [ 0.153611] EVM: security.SMACK64 [ 0.153612] EVM: security.capability [ 0.153687] PM: Registering ACPI NVS region at 6fff0000 (12288 bytes) [ 0.153687] print_constraints: dummy: [ 0.153687] RTC time: 17:32:29, date: 04/30/12 [ 0.153687] NET: Registered protocol family 16 [ 0.153687] Trying to unpack rootfs image as initramfs... [ 0.153687] node 0 link 0: io port [8000, ffff] [ 0.153687] TOM: 0000000080000000 aka 2048M [ 0.153687] node 0 link 0: mmio [a0000, bffff] [ 0.153687] node 0 link 0: mmio [80000000, efffffff] [ 0.153687] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.153687] node 0 link 0: mmio [f0000000, f03fffff] [ 0.153687] bus: [00, 04] on node 0 link 0 [ 0.153687] bus: 00 index 0 [io 0x0000-0xffff] [ 0.153687] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.153687] bus: 00 index 2 [mem 0x80000000-0xf3ffffff] [ 0.153687] bus: 00 index 3 [mem 0xf4000000-0xfcffffffff] [ 0.153687] ACPI: bus type pci registered [ 0.153687] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.153687] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.160620] PCI: Using configuration type 1 for base access [ 0.161880] bio: create slab at 0 [ 0.161999] ACPI: Added _OSI(Module Device) [ 0.162002] ACPI: Added _OSI(Processor Device) [ 0.162004] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.162006] ACPI: Added _OSI(Processor Aggregator Device) [ 0.163119] ACPI: EC: Look up EC in DSDT [ 0.167212] ACPI: Interpreter enabled [ 0.167216] ACPI: (supports S0 S3 S4 S5) [ 0.167236] ACPI: Using IOAPIC for interrupt routing [ 0.174094] ACPI: No dock devices found. [ 0.174099] HEST: Table not found. [ 0.174104] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.174793] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04]) [ 0.176137] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored) [ 0.176140] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored) [ 0.176142] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored) [ 0.176145] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored) [ 0.176148] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.176151] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xefffffff] (ignored) [ 0.176153] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored) [ 0.176156] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored) [ 0.176159] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b] (ignored) [ 0.176161] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored) [ 0.176164] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored) [ 0.176190] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500 [ 0.176370] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601 [ 0.176411] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05 [ 0.176424] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f] [ 0.176440] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] [ 0.176445] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f] [ 0.176474] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.176480] pci 0000:00:01.1: PME# disabled [ 0.176496] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500 [ 0.176540] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03 [ 0.176549] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff] [ 0.176584] pci 0000:00:02.0: supports D1 D2 [ 0.176587] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176590] pci 0000:00:02.0: PME# disabled [ 0.176603] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03 [ 0.176614] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] [ 0.176655] pci 0000:00:02.1: supports D1 D2 [ 0.176657] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176661] pci 0000:00:02.1: PME# disabled [ 0.176681] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604 [ 0.176725] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403 [ 0.176736] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff] [ 0.176778] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.176781] pci 0000:00:05.0: PME# disabled [ 0.176802] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101 [ 0.176823] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] [ 0.176857] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101 [ 0.176866] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7] [ 0.176871] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.176877] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977] [ 0.176882] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73] [ 0.176887] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f] [ 0.176892] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff] [ 0.176922] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101 [ 0.176930] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7] [ 0.176935] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3] [ 0.176940] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967] [ 0.176945] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63] [ 0.176950] pci 0000:00:08.1: reg 20: [io 0xc800-0xc80f] [ 0.176955] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff] [ 0.176995] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604 [ 0.177025] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.177028] pci 0000:00:09.0: PME# disabled [ 0.177045] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604 [ 0.177072] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.177075] pci 0000:00:0b.0: PME# disabled [ 0.177091] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604 [ 0.177118] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.177121] pci 0000:00:0c.0: PME# disabled [ 0.177133] pci 0000:00:0d.0: [10de:03d0] type 0 class 0x000300 [ 0.177141] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.177147] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.177153] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit] [ 0.177160] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.177191] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.177215] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.177231] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.177251] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.177277] PCI: peer root bus 00 res updated from pci conf [ 0.177316] pci 0000:01:06.0: [1057:3052] type 0 class 0x000703 [ 0.177330] pci 0000:01:06.0: reg 10: [mem 0xfdfff000-0xfdffffff] [ 0.177339] pci 0000:01:06.0: reg 14: [io 0xbc00-0xbcff] [ 0.177392] pci 0000:01:06.0: PME# supported from D0 D3hot D3cold [ 0.177396] pci 0000:01:06.0: PME# disabled [ 0.177414] pci 0000:01:09.0: [104c:8024] type 0 class 0x000c00 [ 0.177427] pci 0000:01:09.0: reg 10: [mem 0xfdffe000-0xfdffe7ff] [ 0.177436] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff] [ 0.177485] pci 0000:01:09.0: supports D1 D2 [ 0.177487] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot [ 0.177491] pci 0000:01:09.0: PME# disabled [ 0.177519] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.177522] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] [ 0.177526] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.177530] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref] [ 0.177532] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.177535] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.177538] pci 0000:00:04.0: bridge window [mem 0x80000000-0xf3ffffff] (subtractive decode) [ 0.177541] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xfcffffffff] (subtractive decode) [ 0.177563] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.177567] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] [ 0.177570] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.177574] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.177610] pci 0000:03:00.0: [11ab:4364] type 0 class 0x000200 [ 0.177625] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit] [ 0.177634] pci 0000:03:00.0: reg 18: [io 0x9c00-0x9cff] [ 0.177661] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.177704] pci 0000:03:00.0: supports D1 D2 [ 0.177706] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.177711] pci 0000:03:00.0: PME# disabled [ 0.184030] pci 0000:00:0b.0: PCI bridge to [bus 03-03] [ 0.184034] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff] [ 0.184037] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.184041] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.184062] pci 0000:00:0c.0: PCI bridge to [bus 04-04] [ 0.184066] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff] [ 0.184069] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.184073] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.184084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.184216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.184373] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.184377] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.184379] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.227209] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.227265] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) [ 0.227316] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.227369] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15) [ 0.227419] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.227471] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15) [ 0.227521] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.227573] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.227625] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15) [ 0.227675] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.227728] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 0.227788] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.227841] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 0.227892] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.227948] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) [ 0.228001] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) [ 0.228060] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.228114] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.228171] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.228273] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.228361] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.228447] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.228533] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.228617] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.228704] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.228789] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.228875] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.228962] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.229052] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.229145] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 0.229234] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.229324] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.229413] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.229503] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.229592] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.229682] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.229772] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.229862] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.230040] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.230048] vgaarb: loaded [ 0.230050] vgaarb: bridge control possible 0000:00:0d.0 [ 0.230202] i2c-core: driver [aat2870] using legacy suspend method [ 0.230204] i2c-core: driver [aat2870] using legacy resume method [ 0.230309] SCSI subsystem initialized [ 0.230401] libata version 3.00 loaded. [ 0.230480] usbcore: registered new interface driver usbfs [ 0.230495] usbcore: registered new interface driver hub [ 0.230530] usbcore: registered new device driver usb [ 0.230661] PCI: Using ACPI for IRQ routing [ 0.232123] PCI: pci_cache_line_size set to 64 bytes [ 0.232204] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 0.232207] reserve RAM buffer: 000000006fff0000 - 000000006fffffff [ 0.232341] NetLabel: Initializing [ 0.232343] NetLabel: domain hash size = 128 [ 0.232345] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.232360] NetLabel: unlabeled traffic allowed by default [ 0.232426] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.232433] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.232438] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.240099] Switching to clocksource hpet [ 0.250816] AppArmor: AppArmor Filesystem Enabled [ 0.250864] pnp: PnP ACPI init [ 0.250893] ACPI: bus type pnp registered [ 0.251688] pnp 00:00: [bus 00-04] [ 0.251691] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.251694] pnp 00:00: [io 0x0000-0x03af window] [ 0.251701] pnp 00:00: [io 0x03e0-0x0cf7 window] [ 0.251703] pnp 00:00: [io 0x8000-0xffff window] [ 0.251706] pnp 00:00: [io 0x03b0-0x03df window] [ 0.251708] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.251711] pnp 00:00: [mem 0x80000000-0xefffffff window] [ 0.251713] pnp 00:00: [mem 0xf4000000-0xfe02ffff window] [ 0.251715] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.251718] pnp 00:00: [io 0x4700-0x470b window] [ 0.251720] pnp 00:00: [io 0x1c00-0x1c80 window] [ 0.251723] pnp 00:00: [mem 0xfec80000-0xfecbffff window] [ 0.251817] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.251908] pnp 00:01: [io 0x1000-0x107f] [ 0.251910] pnp 00:01: [io 0x1080-0x10ff] [ 0.251913] pnp 00:01: [io 0x1400-0x147f] [ 0.251915] pnp 00:01: [io 0x1480-0x14ff] [ 0.251917] pnp 00:01: [io 0x1800-0x187f] [ 0.251919] pnp 00:01: [io 0x1880-0x18ff] [ 0.251921] pnp 00:01: [mem 0xfefe0000-0xfefe01ff] [ 0.251923] pnp 00:01: [mem 0xfefe1000-0xfefe10ff] [ 0.251926] pnp 00:01: [mem 0x70000000-0x7fffffff] [ 0.252044] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.252048] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.252051] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.252054] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.252056] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.252059] system 00:01: [io 0x1880-0x18ff] has been reserved [ 0.252063] system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved [ 0.252067] system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved [ 0.252070] system 00:01: [mem 0x70000000-0x7fffffff] has been reserved [ 0.252073] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252792] pnp 00:02: [io 0x0010-0x001f] [ 0.252795] pnp 00:02: [io 0x0022-0x003f] [ 0.252797] pnp 00:02: [io 0x0044-0x004d] [ 0.252799] pnp 00:02: [io 0x0050-0x005e] [ 0.252801] pnp 00:02: [io 0x0062-0x0063] [ 0.252803] pnp 00:02: [io 0x0065-0x006f] [ 0.252805] pnp 00:02: [io 0x0074-0x007f] [ 0.252808] pnp 00:02: [io 0x0091-0x0093] [ 0.252810] pnp 00:02: [io 0x00a2-0x00bf] [ 0.252812] pnp 00:02: [io 0x00e0-0x00ef] [ 0.252814] pnp 00:02: [io 0x04d0-0x04d1] [ 0.252816] pnp 00:02: [io 0x0800-0x087f] [ 0.252818] pnp 00:02: [io 0x0290-0x0297] [ 0.252904] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.252908] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.252911] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.252914] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252927] pnp 00:03: [dma 4] [ 0.252929] pnp 00:03: [io 0x0000-0x000f] [ 0.252931] pnp 00:03: [io 0x0080-0x0090] [ 0.252934] pnp 00:03: [io 0x0094-0x009f] [ 0.252936] pnp 00:03: [io 0x00c0-0x00df] [ 0.252986] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.253039] pnp 00:04: [irq 0 disabled] [ 0.253056] pnp 00:04: [irq 8] [ 0.253058] pnp 00:04: [mem 0xfeff0000-0xfeff03ff] [ 0.253109] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.253139] pnp 00:05: [io 0x0070-0x0073] [ 0.253193] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.253202] pnp 00:06: [io 0x0061] [ 0.253260] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.253273] pnp 00:07: [io 0x00f0-0x00ff] [ 0.253283] pnp 00:07: [irq 13] [ 0.253333] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.253683] pnp 00:08: [io 0x03f8-0x03ff] [ 0.253693] pnp 00:08: [irq 4] [ 0.253779] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.254050] pnp 00:09: [io 0x02f8-0x02ff] [ 0.254059] pnp 00:09: [irq 3] [ 0.254143] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.254502] pnp 00:0a: [io 0x0378-0x037f] [ 0.254511] pnp 00:0a: [irq 7] [ 0.254585] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.254743] pnp 00:0b: [mem 0xf0000000-0xf3ffffff] [ 0.254823] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.254826] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.254998] pnp 00:0c: [mem 0x000d0000-0x000d3fff] [ 0.255000] pnp 00:0c: [mem 0x000f0000-0x000f7fff] [ 0.255002] pnp 00:0c: [mem 0x000f8000-0x000fbfff] [ 0.255004] pnp 00:0c: [mem 0x000fc000-0x000fffff] [ 0.255007] pnp 00:0c: [mem 0xfeff0000-0xfeff00ff] [ 0.255009] pnp 00:0c: [mem 0x6fff0000-0x6fffffff] [ 0.255011] pnp 00:0c: [mem 0xffff0000-0xffffffff] [ 0.255013] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.255016] pnp 00:0c: [mem 0x00100000-0x6ffeffff] [ 0.255018] pnp 00:0c: [mem 0x70000000-0x7fffffff] [ 0.255020] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.255029] pnp 00:0c: [mem 0xfee00000-0xfeefffff] [ 0.255032] pnp 00:0c: [mem 0xfefff000-0xfeffffff] [ 0.255034] pnp 00:0c: [mem 0xfff80000-0xfff80fff] [ 0.255036] pnp 00:0c: [mem 0xfff90000-0xfffbffff] [ 0.255039] pnp 00:0c: [mem 0xfffed000-0xfffeffff] [ 0.255129] system 00:0c: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.255132] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.255135] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.255138] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.255142] system 00:0c: [mem 0xfeff0000-0xfeff00ff] has been reserved [ 0.255145] system 00:0c: [mem 0x6fff0000-0x6fffffff] could not be reserved [ 0.255148] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.255151] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.255154] system 00:0c: [mem 0x00100000-0x6ffeffff] could not be reserved [ 0.255157] system 00:0c: [mem 0x70000000-0x7fffffff] has been reserved [ 0.255161] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.255164] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.255167] system 00:0c: [mem 0xfefff000-0xfeffffff] has been reserved [ 0.255170] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.255173] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.255177] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.255180] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.255202] pnp: PnP ACPI: found 13 devices [ 0.255204] ACPI: ACPI bus type pnp unregistered [ 0.261981] PCI: max bus depth: 1 pci_try_num: 2 [ 0.262013] pci 0000:00:0d.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref] [ 0.262019] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.262022] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] [ 0.262026] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.262030] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref] [ 0.262034] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.262037] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] [ 0.262040] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.262044] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.262049] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref] [ 0.262052] pci 0000:00:0b.0: PCI bridge to [bus 03-03] [ 0.262055] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff] [ 0.262058] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.262061] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.262065] pci 0000:00:0c.0: PCI bridge to [bus 04-04] [ 0.262068] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff] [ 0.262071] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.262075] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.262086] pci 0000:00:04.0: setting latency timer to 64 [ 0.262091] pci 0000:00:09.0: setting latency timer to 64 [ 0.262096] pci 0000:00:0b.0: setting latency timer to 64 [ 0.262101] pci 0000:00:0c.0: setting latency timer to 64 [ 0.262105] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.262107] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.262110] pci_bus 0000:00: resource 6 [mem 0x80000000-0xf3ffffff] [ 0.262112] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff] [ 0.262115] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.262118] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.262121] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref] [ 0.262123] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.262126] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff] [ 0.262129] pci_bus 0000:01: resource 6 [mem 0x80000000-0xf3ffffff] [ 0.262131] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xfcffffffff] [ 0.262134] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.262137] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.262140] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.262143] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff] [ 0.262145] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.262148] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.262151] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff] [ 0.262154] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.262157] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.262218] NET: Registered protocol family 2 [ 0.262367] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.263436] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.265947] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.266591] TCP: Hash tables configured (established 262144 bind 65536) [ 0.266595] TCP reno registered [ 0.266606] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.266634] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.266767] NET: Registered protocol family 1 [ 0.267085] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.267108] pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.336033] pci 0000:00:02.0: PCI INT A disabled [ 0.336215] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.336228] pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.336241] pci 0000:00:02.1: PCI INT B disabled [ 0.336286] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336335] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336392] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336446] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336504] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336564] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336630] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336637] pci 0000:00:0d.0: Boot video device [ 0.336656] PCI: CLS 64 bytes, default 64 [ 0.351346] audit: initializing netlink socket (disabled) [ 0.351362] type=2000 audit(1335807148.344:1): initialized [ 0.384062] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.403391] VFS: Disk quotas dquot_6.5.2 [ 0.403470] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.404445] fuse init (API version 7.17) [ 0.404795] msgmni has been set to 3467 [ 0.405206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.405239] io scheduler noop registered [ 0.405241] io scheduler deadline registered [ 0.405294] io scheduler cfq registered (default) [ 0.408219] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.408257] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.408386] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.408410] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X [ 0.416153] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.416191] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X [ 0.416309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.416342] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.416535] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.416542] ACPI: Power Button [PWRB] [ 0.416616] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.416619] ACPI: Power Button [PWRF] [ 0.416687] ACPI: Fan [FAN] (on) [ 0.419939] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.419941] ACPI: Thermal Zone [THRM] (40 C) [ 0.419993] ERST: Table is not found! [ 0.419995] GHES: HEST is not enabled! [ 0.420156] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.440511] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.484324] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.514095] Freeing initrd memory: 14392k freed [ 0.616522] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.652434] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.664414] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 0.664438] serial 0000:01:06.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 0.664466] serial 0000:01:06.0: PCI INT A disabled [ 0.664767] Linux agpgart interface v0.103 [ 0.666748] brd: module loaded [ 0.667831] loop: module loaded [ 0.668302] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.668543] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 0.668559] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 [ 0.668584] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.668592] pata_acpi 0000:00:08.0: PCI INT A disabled [ 0.668815] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 [ 0.668829] pata_acpi 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 0.668847] pata_acpi 0000:00:08.1: setting latency timer to 64 [ 0.668854] pata_acpi 0000:00:08.1: PCI INT B disabled [ 0.669455] Fixed MDIO Bus: probed [ 0.669484] tun: Universal TUN/TAP device driver, 1.6 [ 0.669486] tun: (C) 1999-2004 Max Krasnyansky [ 0.669556] PPP generic driver version 2.4.2 [ 0.669702] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.669761] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.669782] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.669785] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.669885] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.669911] ehci_hcd 0000:00:02.1: debug port 1 [ 0.669918] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.669947] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 0.680017] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.680198] hub 1-0:1.0: USB hub found [ 0.680203] hub 1-0:1.0: 10 ports detected [ 0.680329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.680388] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.680400] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.680403] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.680465] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.680496] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 0.738137] hub 2-0:1.0: USB hub found [ 0.738142] hub 2-0:1.0: 10 ports detected [ 0.738244] uhci_hcd: USB Universal Host Controller Interface driver [ 0.738316] usbcore: registered new interface driver libusual [ 0.738371] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.738794] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.738803] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.738955] mousedev: PS/2 mouse device common for all mice [ 0.739133] rtc_cmos 00:05: RTC can wake from S4 [ 0.739286] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.739329] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.739452] device-mapper: uevent: version 1.0.3 [ 0.739547] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.739557] cpuidle: using governor ladder [ 0.739559] cpuidle: using governor menu [ 0.739561] EFI Variables Facility v0.08 2004-May-17 [ 0.739841] TCP cubic registered [ 0.739982] NET: Registered protocol family 10 [ 0.740650] NET: Registered protocol family 17 [ 0.740672] Registering the dns_resolver key type [ 0.740855] PM: Hibernation image not present or could not be loaded. [ 0.740877] registered taskstats version 1 [ 0.758266] Magic number: 8:523:543 [ 0.758394] rtc_cmos 00:05: setting system clock to 2012-04-30 17:32:29 UTC (1335807149) [ 0.758403] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2 cpu cores) (version 2.20.00) [ 0.758447] powernow-k8: fid 0xf (2300 MHz), vid 0xa [ 0.758449] powernow-k8: fid 0xe (2200 MHz), vid 0xb [ 0.758451] powernow-k8: fid 0xc (2000 MHz), vid 0xd [ 0.758453] powernow-k8: fid 0xa (1800 MHz), vid 0xf [ 0.758455] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 0.758514] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.758516] EDD information not available. [ 0.760472] Freeing unused kernel memory: 920k freed [ 0.761007] Write protecting the kernel read-only data: 12288k [ 0.767030] Freeing unused kernel memory: 1608k freed [ 0.772588] Freeing unused kernel memory: 1196k freed [ 0.799479] udevd[118]: starting version 175 [ 0.879674] pata_amd 0000:00:06.0: version 0.4.1 [ 0.879733] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.882087] scsi0 : pata_amd [ 0.883847] scsi1 : pata_amd [ 0.884446] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.884449] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.893951] sata_nv 0000:00:08.0: version 3.5 [ 0.893975] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 [ 0.894046] sata_nv 0000:00:08.0: setting latency timer to 64 [ 0.896164] scsi2 : sata_nv [ 0.897737] scsi3 : sata_nv [ 0.897945] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21 [ 0.897948] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21 [ 0.900192] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 0.900267] sata_nv 0000:00:08.1: setting latency timer to 64 [ 0.902417] scsi4 : sata_nv [ 0.903207] scsi5 : sata_nv [ 0.903415] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20 [ 0.903418] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20 [ 0.922270] sky2: driver version 1.30 [ 0.942097] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 0.942125] sky2 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 0.942140] sky2 0000:03:00.0: setting latency timer to 64 [ 0.942181] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2 [ 0.942247] sky2 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.942827] sky2 0000:03:00.0: eth0: addr 00:19:21:58:4d:22 [ 1.048392] usb 1-6: new high-speed USB device number 3 using ehci_hcd [ 1.048409] ata1.00: ATAPI: HL-DT-STDVD+-RW GSA-H21N, 1.01, max UDMA/33 [ 1.048419] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) [ 1.064316] ata1.00: configured for UDMA/33 [ 1.067204] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H21N 1.01 PQ: 0 ANSI: 5 [ 1.070241] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.070244] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.070430] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.070587] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.070698] ata2: port disabled--ignoring [ 1.184642] Initializing USB Mass Storage driver... [ 1.184964] scsi6 : usb-storage 1-6:1.0 [ 1.185210] usbcore: registered new interface driver usb-storage [ 1.185213] USB Mass Storage support registered. [ 1.185458] usbcore: registered new interface driver uas [ 1.230256] ata5: SATA link down (SStatus 0 SControl 300) [ 1.364040] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.372319] ata3.00: ATA-7: Hitachi HDT725032VLA380, V54OA52A, max UDMA/133 [ 1.372322] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.388301] ata3.00: configured for UDMA/133 [ 1.388475] scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5 [ 1.388665] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.388703] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.388750] sd 2:0:0:0: [sda] Write Protect is off [ 1.388753] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.388785] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.400778] sda: sda1 sda2 < sda5 > [ 1.401218] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.460025] usb 1-10: new high-speed USB device number 6 using ehci_hcd [ 1.612458] scsi7 : usb-storage 1-10:1.0 [ 1.710253] ata4: SATA link down (SStatus 0 SControl 300) [ 1.916017] usb 2-5: new low-speed USB device number 2 using ohci_hcd [ 2.030261] ata6: SATA link down (SStatus 0 SControl 300) [ 2.037610] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 2.037639] firewire_ohci 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 2.037645] firewire_ohci 0000:01:09.0: setting latency timer to 64 [ 2.092078] firewire_ohci: Added fw-ohci device 0000:01:09.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 2.137682] usbcore: registered new interface driver usbhid [ 2.137686] usbhid: USB HID core driver [ 2.146387] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input2 [ 2.146529] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-5/input0 [ 2.156084] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 2.157072] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.1/input/input3 [ 2.157901] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-5/input1 [ 2.185001] scsi 6:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 [ 2.185516] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.186796] sd 6:0:0:0: [sdb] 39075372 2048-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.188121] sd 6:0:0:0: [sdb] Write Protect is off [ 2.188126] sd 6:0:0:0: [sdb] Mode Sense: 68 00 00 08 [ 2.189241] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.190984] sd 6:0:0:0: [sdb] 39075372 2048-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.436038] usb 2-7: new full-speed USB device number 3 using ohci_hcd [ 2.470386] sdb: sdb1 sdb2 [ 2.472118] sd 6:0:0:0: [sdb] 39075372 2048-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.474982] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 2.500067] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 2.592167] firewire_core: created device fw0: GUID 00001921ff151b92, S400 [ 2.619129] scsi 7:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 2.625989] scsi 7:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 2.632989] scsi 7:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 2.639989] scsi 7:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 2.640685] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 2.640866] sd 7:0:0:1: Attached scsi generic sg4 type 0 [ 2.641025] sd 7:0:0:2: Attached scsi generic sg5 type 0 [ 2.641187] sd 7:0:0:3: Attached scsi generic sg6 type 0 [ 2.670364] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input4 [ 2.670517] generic-usb 0003:046D:C52F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-7/input0 [ 2.681146] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.1/input/input5 [ 2.681270] generic-usb 0003:046D:C52F.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-7/input1 [ 2.984026] usb 2-9: new low-speed USB device number 4 using ohci_hcd [ 3.079754] sd 7:0:0:2: [sde] 7954432 512-byte logical blocks: (4.07 GB/3.79 GiB) [ 3.081602] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 3.082351] sd 7:0:0:2: [sde] Write Protect is off [ 3.082354] sd 7:0:0:2: [sde] Mode Sense: 03 00 00 00 [ 3.082977] sd 7:0:0:1: [sdd] Attached SCSI removable disk [ 3.083600] sd 7:0:0:3: [sdf] Attached SCSI removable disk [ 3.084353] sd 7:0:0:2: [sde] No Caching mode page present [ 3.084355] sd 7:0:0:2: [sde] Assuming drive cache: write through [ 3.088727] sd 7:0:0:2: [sde] No Caching mode page present [ 3.088730] sd 7:0:0:2: [sde] Assuming drive cache: write through [ 3.089895] sde: sde1 [ 3.093600] sd 7:0:0:2: [sde] No Caching mode page present [ 3.093603] sd 7:0:0:2: [sde] Assuming drive cache: write through [ 3.093606] sd 7:0:0:2: [sde] Attached SCSI removable disk [ 3.218164] input: Acer IR Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input6 [ 3.218341] generic-usb 0003:147A:E00D.0005: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Acer IR Receiver] on usb-0000:00:02.0-9/input0 [ 6.176781] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.599315] udevd[447]: starting version 175 [ 6.776349] Adding 1830908k swap on /dev/mapper/bailey--pc2-swap_1. Priority:-1 extents:1 across:1830908k [ 8.470154] lp: driver loaded but no devices found [ 8.707222] parport_pc 00:0a: reported by Plug and Play ACPI [ 8.707272] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.804391] lp0: using parport0 (interrupt-driven). [ 8.868414] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 8.873066] ppdev: user-space parallel port driver [ 8.916871] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 8.916960] i2c i2c-1: nForce2 SMBus adapter at 0xf400 [ 9.086334] wmi: Mapper loaded [ 9.129444] MCE: In-kernel MCE decoding enabled. [ 9.150931] EDAC MC: Ver: 2.1.0 [ 9.419513] AMD64 EDAC driver v3.4.0 [ 9.419659] EDAC amd64: DRAM ECC disabled. [ 9.419670] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 9.419672] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 9.419673] (Note that use of the override may cause unknown side effects.) [ 9.647894] [drm] Initialized drm 1.1.0 20060810 [ 9.872165] VGA switcheroo: detected Optimus DSM method \ handle [ 9.872668] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23 [ 9.872677] nouveau 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 23 (level, low) -> IRQ 23 [ 9.872682] nouveau 0000:00:0d.0: setting latency timer to 64 [ 9.874049] [drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2) [ 9.875374] [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN [ 9.918360] [drm] nouveau 0000:00:0d.0: ... appears to be valid [ 9.918364] [drm] nouveau 0000:00:0d.0: BIT BIOS found [ 9.918367] [drm] nouveau 0000:00:0d.0: Bios version 05.61.32.25 [ 9.918371] [drm] nouveau 0000:00:0d.0: TMDS table version 1.1 [ 9.918374] [drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0 [ 9.918378] [drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023 [ 9.918382] [drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 98830003 [ 9.918386] [drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2 [ 9.918389] [drm] nouveau 0000:00:0d.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 9.918392] [drm] nouveau 0000:00:0d.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07 [ 9.918395] [drm] nouveau 0000:00:0d.0: 2: 0x00000110: type 0x10 idx 2 tag 0xff [ 9.918397] [drm] nouveau 0000:00:0d.0: 3: 0x00000111: type 0x11 idx 3 tag 0xff [ 9.918400] [drm] nouveau 0000:00:0d.0: 4: 0x00000113: type 0x13 idx 4 tag 0xff [ 9.918407] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDEB3 [ 9.918411] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D ======= [ 9.918420] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D ======= [ 9.918476] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xE00A [ 9.918478] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xE00B [ 9.918543] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xE18D [ 9.918548] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xE1D6 [ 10.396085] [drm] nouveau 0000:00:0d.0: 1 available performance level(s) [ 10.396093] [drm] nouveau 0000:00:0d.0: 0: core 425MHz shader 425MHz fanspeed 100% [ 10.396099] [drm] nouveau 0000:00:0d.0: c: [ 10.398167] [TTM] Zone kernel: Available graphics memory: 896746 kiB. [ 10.398172] [TTM] Initializing pool allocator. [ 10.398192] [drm] nouveau 0000:00:0d.0: Detected 256MiB VRAM [ 10.400575] [drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture) [ 10.404448] [drm] nouveau 0000:00:0d.0: unknown connector type: 0xff!! [ 10.405521] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.405524] [drm] No driver support for vblank timestamp query. [ 10.405529] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [ 10.456023] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 10.456347] [drm] nouveau 0000:00:0d.0: allocated 1024x768 fb: 0x49000, bo ffff88006b0c0000 [ 10.456519] fbcon: nouveaufb (fb0) is primary device [ 10.522322] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [ 10.522327] [drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A [ 10.522409] Console: switching to colour frame buffer device 128x48 [ 10.523324] fb0: nouveaufb frame buffer device [ 10.523326] drm: registered panic notifier [ 10.523339] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:0d.0 on minor 0 [ 10.538704] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 12.591900] type=1400 audit(1335807161.327:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=657 comm="apparmor_parser" [ 12.591979] type=1400 audit(1335807161.327:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=657 comm="apparmor_parser" [ 12.592064] type=1400 audit(1335807161.331:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=657 comm="apparmor_parser" [ 12.625834] type=1400 audit(1335807161.363:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=667 comm="apparmor_parser" [ 12.625920] type=1400 audit(1335807161.363:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=667 comm="apparmor_parser" [ 12.625983] type=1400 audit(1335807161.363:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=667 comm="apparmor_parser" [ 12.846869] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 12.846878] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 12.846881] hda_intel: Disabling MSI [ 12.846914] snd_hda_intel 0000:00:05.0: setting latency timer to 64 [ 13.612023] hda_codec: ALC888: BIOS auto-probing. [ 14.816154] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7 [ 14.816290] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8 [ 14.816360] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9 [ 14.816432] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input10 [ 14.816503] input: HDA NVidia Line-Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input11 [ 14.816581] input: HDA NVidia Line-Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input12 [ 14.816650] input: HDA NVidia Line-Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input13 [ 14.816722] input: HDA NVidia Line-Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input14 [ 15.427036] sky2 0000:03:00.0: eth0: enabling interface [ 15.427426] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.674897] ipod-set-info: sending ioctl 2285 to a partition! [ 15.674902] ipod-set-info: sending ioctl 2285 to a partition! [ 15.694007] ipod-set-info: sending ioctl 2285 to a partition! [ 15.694010] ipod-set-info: sending ioctl 2285 to a partition! [ 15.695863] ipod-set-info: sending ioctl 2285 to a partition! [ 15.695865] ipod-set-info: sending ioctl 2285 to a partition! [ 15.697860] ipod-set-info: sending ioctl 2285 to a partition! [ 15.697862] ipod-set-info: sending ioctl 2285 to a partition! [ 15.699609] ipod-set-info: sending ioctl 2285 to a partition! [ 15.699611] ipod-set-info: sending ioctl 2285 to a partition! [ 17.900427] sky2 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 17.900770] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.290850] init: mounted-tmp main process (900) terminated with status 1 [ 22.754928] init: smbd main process (1029) killed by HUP signal [ 22.754966] init: smbd main process ended, respawning [ 27.404680] Bluetooth: Core ver 2.16 [ 27.404723] NET: Registered protocol family 31 [ 27.404726] Bluetooth: HCI device and connection manager initialized [ 27.404730] Bluetooth: HCI socket layer initialized [ 27.404732] Bluetooth: L2CAP socket layer initialized [ 27.404739] Bluetooth: SCO socket layer initialized [ 27.457283] Bluetooth: RFCOMM TTY layer initialized [ 27.457290] Bluetooth: RFCOMM socket layer initialized [ 27.457292] Bluetooth: RFCOMM ver 1.11 [ 27.747685] type=1400 audit(1335807176.483:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1233 comm="apparmor_parser" [ 27.748046] type=1400 audit(1335807176.487:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1233 comm="apparmor_parser" [ 28.601086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.601090] Bluetooth: BNEP filters: protocol multicast [ 28.768019] eth0: no IPv6 routers present [ 30.176360] init: failsafe main process (958) killed by TERM signal [ 31.353926] type=1400 audit(1335807180.091:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1518 comm="apparmor_parser" [ 31.685943] type=1400 audit(1335807180.423:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1518 comm="apparmor_parser" [ 31.686048] type=1400 audit(1335807180.423:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1518 comm="apparmor_parser" [ 33.166928] type=1400 audit(1335807181.903:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1550 comm="apparmor_parser" [ 33.167361] type=1400 audit(1335807181.903:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1550 comm="apparmor_parser" [ 34.139204] type=1400 audit(1335807182.875:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1558 comm="apparmor_parser" [ 34.139681] type=1400 audit(1335807182.875:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1558 comm="apparmor_parser" [ 34.508796] type=1400 audit(1335807183.247:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1562 comm="apparmor_parser" [ 44.335093] type=1400 audit(1335806813.775:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1519 comm="apparmor_parser" [ 44.336493] type=1400 audit(1335806813.779:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1519 comm="apparmor_parser" [ 44.336946] type=1400 audit(1335806813.779:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1519 comm="apparmor_parser" [ 44.338101] type=1400 audit(1335806813.779:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1519 comm="apparmor_parser" [ 44.339180] type=1400 audit(1335806813.779:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1519 comm="apparmor_parser" [ 44.339639] type=1400 audit(1335806813.779:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1519 comm="apparmor_parser" [ 44.340542] type=1400 audit(1335806813.783:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1519 comm="apparmor_parser" [ 44.341312] type=1400 audit(1335806813.783:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1519 comm="apparmor_parser" [ 44.799996] init: alsa-restore main process (1597) terminated with status 99 [ 46.492055] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 46.524019] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 50.096040] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 52.600680] init: plymouth-stop pre-start process (1816) terminated with status 1 [ 55.168017] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 55.400014] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 65.112017] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 76.616023] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 78.352033] [drm] nouveau 0000:00:0d.0: Load detected on output A [ 760.827717] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [117125.235109] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [117390.892971] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [118045.829081] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [183554.197107] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [184435.826706] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [240723.017115] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [241354.825682] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [245146.727088] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [245776.827954] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [247534.261067] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [248164.828105] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [362317.557093] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [362431.992848] usb 2-7: USB disconnect, device number 3 [362838.830910] sky2 0000:03:00.0: eth0: Link is down [363061.828973] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [363096.464087] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [363726.826004] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [424097.400040] usb 2-7: new full-speed USB device number 5 using ohci_hcd [424097.634650] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input15 [424097.635200] generic-usb 0003:046D:C52F.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-7/input0 [424097.645197] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.1/input/input16 [424097.645581] generic-usb 0003:046D:C52F.0007: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-7/input1 [424098.491120] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [424121.648055] [drm] nouveau 0000:00:0d.0: Load detected on output A [424121.680022] [drm] nouveau 0000:00:0d.0: Load detected on output A [424122.512034] [drm] nouveau 0000:00:0d.0: Load detected on output A [424126.908035] [drm] nouveau 0000:00:0d.0: Load detected on output A [424130.164069] [drm] nouveau 0000:00:0d.0: Load detected on output A [424148.848025] [drm] nouveau 0000:00:0d.0: Load detected on output A [424149.544029] [drm] nouveau 0000:00:0d.0: Load detected on output A [424151.128058] [drm] nouveau 0000:00:0d.0: Load detected on output A [424252.819699] sky2 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [424253.598759] sky2 0000:03:00.0: eth0: Link is down [424256.455087] sky2 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [424979.901880] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [582664.515259] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [583295.900060] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [865302.271061] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [865353.307992] usb 2-7: USB disconnect, device number 5 [865356.184091] usb 2-7: new full-speed USB device number 6 using ohci_hcd [865356.418794] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input17 [865356.419157] generic-usb 0003:046D:C52F.0008: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-7/input0 [865356.429188] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.1/input/input18 [865356.429654] generic-usb 0003:046D:C52F.0009: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-7/input1 [865363.401690] usb 2-7: USB disconnect, device number 6 [865392.148057] usb 2-8: new full-speed USB device number 7 using ohci_hcd [865392.382650] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input19 [865392.383085] generic-usb 0003:046D:C52F.000A: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-8/input0 [865392.393161] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.1/input/input20 [865392.393612] generic-usb 0003:046D:C52F.000B: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-8/input1 [865558.476021] [drm] nouveau 0000:00:0d.0: Load detected on output A [865604.436027] [drm] nouveau 0000:00:0d.0: Load detected on output A [865645.400020] [drm] nouveau 0000:00:0d.0: Load detected on output A [865757.460035] [drm] nouveau 0000:00:0d.0: Load detected on output A [865809.608022] [drm] nouveau 0000:00:0d.0: Load detected on output A [865819.932021] [drm] nouveau 0000:00:0d.0: Load detected on output A [865827.184019] [drm] nouveau 0000:00:0d.0: Load detected on output A [865829.359681] aqueue:src[642]: segfault at 0 ip 00007f5bd2f1d2f6 sp 00007f5b8b9cc3f0 error 4 in libglib-2.0.so.0.3200.1[7f5bd2e9a000+f2000] [865929.552024] [drm] nouveau 0000:00:0d.0: Load detected on output A [867114.900242] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [878130.329265] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [878788.902732] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [1276596.919134] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [1277401.900788] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [1501878.238072] usb 1-6: USB disconnect, device number 3 [1501885.916070] usb 1-6: new high-speed USB device number 10 using ehci_hcd [1501931.541443] usb 1-6: USB disconnect, device number 10 [1501935.424078] usb 1-7: new high-speed USB device number 11 using ehci_hcd [1501941.000130] usb 1-6: new high-speed USB device number 12 using ehci_hcd [1501941.136289] scsi8 : usb-storage 1-6:1.0 [1501942.137359] scsi 8:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 [1501942.139211] sd 8:0:0:0: Attached scsi generic sg2 type 0 [1501944.595057] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [1501945.306818] sd 8:0:0:0: [sdb] 39075372 2048-byte logical blocks: (80.0 GB/74.5 GiB) [1501945.307917] sd 8:0:0:0: [sdb] Write Protect is off [1501945.307925] sd 8:0:0:0: [sdb] Mode Sense: 68 00 00 08 [1501945.309044] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [1501945.313074] sd 8:0:0:0: [sdb] 39075372 2048-byte logical blocks: (80.0 GB/74.5 GiB) [1501945.332150] sdb: sdb1 sdb2 [1501945.337613] sd 8:0:0:0: [sdb] 39075372 2048-byte logical blocks: (80.0 GB/74.5 GiB) [1501945.340208] sd 8:0:0:0: [sdb] Attached SCSI removable disk [1501946.915746] scsi_verify_blk_ioctl: 72 callbacks suppressed [1501946.915755] ipod-set-info: sending ioctl 2285 to a partition! [1501946.915762] ipod-set-info: sending ioctl 2285 to a partition! [1501946.935168] ipod-set-info: sending ioctl 2285 to a partition! [1501946.935181] ipod-set-info: sending ioctl 2285 to a partition! [1501946.937073] ipod-set-info: sending ioctl 2285 to a partition! [1501946.937080] ipod-set-info: sending ioctl 2285 to a partition! [1501946.939082] ipod-set-info: sending ioctl 2285 to a partition! [1501946.939088] ipod-set-info: sending ioctl 2285 to a partition! [1501946.940930] ipod-set-info: sending ioctl 2285 to a partition! [1501946.940936] ipod-set-info: sending ioctl 2285 to a partition! [1502080.973960] usb 1-7: USB disconnect, device number 11 [1502590.900432] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [1992359.557304] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [1992617.196019] [drm] nouveau 0000:00:0d.0: Load detected on output A [1992652.372024] [drm] nouveau 0000:00:0d.0: Load detected on output A [1992723.244020] [drm] nouveau 0000:00:0d.0: Load detected on output A [1992842.676022] [drm] nouveau 0000:00:0d.0: Load detected on output A [1992869.088019] [drm] nouveau 0000:00:0d.0: Load detected on output A [1992930.200021] [drm] nouveau 0000:00:0d.0: Load detected on output A [1992954.680019] [drm] nouveau 0000:00:0d.0: Load detected on output A