Ubuntu
qrouter package

qrouter 1.3.33-1 source package in Ubuntu

qrouter (1.3.33-1) unstable; urgency=medium

  * New upstream release

 -- Ruben Undheim <email address hidden>  Sun, 03 Jan 2016 11:21:51 +0100

Series	Pocket	Published	Component	Section
Xenial	release	on 2016-01-04	universe	misc

No changes file available.

qrouter: Multi-level, over-the-cell maze router: Qrouter is a tool to generate metal layers and vias to physically connect
together a netlist in a VLSI fabrication technology. It is a maze router,
otherwise known as an "over-the-cell" router or "sea-of-gates" router. That
is, unlike a channel router, it begins with a description of placed standard
cells, usually packed together at minimum spacing, and places metal routes
over the standard cells.
.
Qrouter uses the open standard LEF and DEF formats as file input and output.
It takes the cell definitions from a LEF file, and analyzes the geometry for
each cell to determine contact points and route obstructions. It then reads
the cell placement, pin placement, and netlist from a DEF file, performs the
detailed route, and writes an annotated DEF file as output.

qrouter-dbgsym: debug symbols for package qrouter: Qrouter is a tool to generate metal layers and vias to physically connect
together a netlist in a VLSI fabrication technology. It is a maze router,
otherwise known as an "over-the-cell" router or "sea-of-gates" router. That
is, unlike a channel router, it begins with a description of placed standard
cells, usually packed together at minimum spacing, and places metal routes
over the standard cells.
.
Qrouter uses the open standard LEF and DEF formats as file input and output.
It takes the cell definitions from a LEF file, and analyzes the geometry for
each cell to determine contact points and route obstructions. It then reads
the cell placement, pin placement, and netlist from a DEF file, performs the
detailed route, and writes an annotated DEF file as output.