[ 0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03 [ 0.000000] Linux version 5.3.0-24-generic (buildd@lgw01-amd64-035) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 (Ubuntu 5.3.0-24.26-generic 5.3.10) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-24-generic root=UUID=f641f756-908c-4b66-95b5-60117eae8296 ro quiet splash nvidia-drm.modeset=1 vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000078726fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078727000-0x000000007986dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007986e000-0x0000000079fa5fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079fa6000-0x000000007a0e9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007a0ea000-0x000000007ab44fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ab45000-0x000000007ac0efff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007ac0f000-0x000000007ac0ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ac10000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.60 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x79fec000 ACPI=0x79fec000 TPMFinalLog=0x7a054000 SMBIOS=0x7a99c000 SMBIOS 3.0=0x7a99b000 ESRT=0x76e29298 MEMATTR=0x7453e018 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: SchenkerTechnologiesGmbH XMG Mobile A507 VE/N857EX1M, BIOS 1.07.06RGME3_10003 11/30/2018 [ 0.000000] tsc: Detected 2200.000 MHz processor [ 0.000775] tsc: Detected 2199.996 MHz TSC [ 0.000775] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000777] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000784] last_pfn = 0x47e000 max_arch_pfn = 0x400000000 [ 0.000801] MTRR default type: uncachable [ 0.000802] MTRR fixed ranges enabled: [ 0.000803] 00000-9FFFF write-back [ 0.000804] A0000-BFFFF uncachable [ 0.000805] C0000-FFFFF write-back [ 0.000806] MTRR variable ranges enabled: [ 0.000807] 0 base 0080000000 mask 7FF0000000 write-combining [ 0.000809] 1 base 0000000000 mask 7F80000000 write-back [ 0.000810] 2 base 007B800000 mask 7FFF800000 uncachable [ 0.000810] 3 base 007C000000 mask 7FFC000000 uncachable [ 0.000811] 4 base 0100000000 mask 7F00000000 write-back [ 0.000812] 5 base 0200000000 mask 7E00000000 write-back [ 0.000813] 6 base 0400000000 mask 7F80000000 write-back [ 0.000814] 7 disabled [ 0.000814] 8 disabled [ 0.000815] 9 disabled [ 0.001354] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001559] last_pfn = 0x7ac10 max_arch_pfn = 0x400000000 [ 0.020897] esrt: Reserving ESRT space from 0x0000000076e29298 to 0x0000000076e292d0. [ 0.020909] check: Scanning 1 areas for low memory corruption [ 0.020913] Using GB pages for direct mapping [ 0.020915] BRK [0x245001000, 0x245001fff] PGTABLE [ 0.020917] BRK [0x245002000, 0x245002fff] PGTABLE [ 0.020918] BRK [0x245003000, 0x245003fff] PGTABLE [ 0.020963] BRK [0x245004000, 0x245004fff] PGTABLE [ 0.020964] BRK [0x245005000, 0x245005fff] PGTABLE [ 0.021116] BRK [0x245006000, 0x245006fff] PGTABLE [ 0.021156] BRK [0x245007000, 0x245007fff] PGTABLE [ 0.021206] BRK [0x245008000, 0x245008fff] PGTABLE [ 0.021264] BRK [0x245009000, 0x245009fff] PGTABLE [ 0.021306] BRK [0x24500a000, 0x24500afff] PGTABLE [ 0.021399] RAMDISK: [mem 0x324b9000-0x35253fff] [ 0.021409] ACPI: Early table checksum verification disabled [ 0.021412] ACPI: RSDP 0x0000000079FEC000 000024 (v02 XMG ) [ 0.021416] ACPI: XSDT 0x0000000079FEC0A8 0000D4 (v01 XMG Schenker 01072009 AMI 00010013) [ 0.021422] ACPI: FACP 0x000000007A031AB8 000114 (v06 XMG Schenker 01072009 AMI 00010013) [ 0.021428] ACPI: DSDT 0x0000000079FEC218 0458A0 (v02 XMG Schenker 01072009 INTL 20160527) [ 0.021431] ACPI: FACS 0x000000007A0E9080 000040 [ 0.021434] ACPI: APIC 0x000000007A031BD0 0000F4 (v04 XMG Schenker 01072009 AMI 00010013) [ 0.021437] ACPI: FPDT 0x000000007A031CC8 000044 (v01 XMG Schenker 01072009 AMI 00010013) [ 0.021440] ACPI: FIDT 0x000000007A031D10 00009C (v01 XMG Schenker 01072009 AMI 00010013) [ 0.021443] ACPI: MCFG 0x000000007A031DB0 00003C (v01 XMG Schenker 01072009 MSFT 00000097) [ 0.021446] ACPI: SSDT 0x000000007A031DF0 000334 (v01 SataRe SataTabl 00001000 INTL 20160527) [ 0.021449] ACPI: SSDT 0x000000007A032128 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.021452] ACPI: SSDT 0x000000007A033900 001894 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.021455] ACPI: SSDT 0x000000007A035198 0020A5 (v02 PegSsd PegSsdt 00001000 INTL 20160527) [ 0.021458] ACPI: UEFI 0x000000007A037240 000048 (v01 XMG Schenker 00000002 01000013) [ 0.021461] ACPI: SSDT 0x000000007A037288 00058A (v02 Intel PerfTune 00001000 INTL 20160527) [ 0.021464] ACPI: LPIT 0x000000007A037818 00005C (v01 INTEL Schenker 00000002 01000013) [ 0.021467] ACPI: SSDT 0x000000007A037878 001A28 (v02 INTEL PtidDevc 00001000 INTL 20160527) [ 0.021470] ACPI: SSDT 0x000000007A0392A0 000FFE (v02 INTEL TbtTypeC 00000000 INTL 20160527) [ 0.021473] ACPI: DBGP 0x000000007A03A2A0 000034 (v01 XMG Schenker 00000002 01000013) [ 0.021476] ACPI: DBG2 0x000000007A03A2D8 000054 (v00 XMG Schenker 00000002 01000013) [ 0.021479] ACPI: SSDT 0x000000007A03A330 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527) [ 0.021482] ACPI: DMAR 0x000000007A03A3E0 0000A8 (v01 INTEL EDK2 00000002 01000013) [ 0.021485] ACPI: BGRT 0x000000007A03A488 000038 (v01 XMG Schenker 01072009 AMI 00010013) [ 0.021488] ACPI: TPM2 0x000000007A03A4C0 000034 (v04 XMG Schenker 00000001 AMI 00000000) [ 0.021491] ACPI: SSDT 0x000000007A03A4F8 001EDD (v01 OptRef OptTabl 00001000 INTL 20160527) [ 0.021494] ACPI: WSMT 0x000000007A03C3D8 000028 (v01 XMG Schenker 01072009 AMI 00010013) [ 0.021509] ACPI: Local APIC address 0xfee00000 [ 0.021829] No NUMA configuration found [ 0.021830] Faking a node at [mem 0x0000000000000000-0x000000047dffffff] [ 0.021840] NODE_DATA(0) allocated [mem 0x47dfd5000-0x47dffffff] [ 0.022103] Zone ranges: [ 0.022104] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.022106] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.022107] Normal [mem 0x0000000100000000-0x000000047dffffff] [ 0.022108] Device empty [ 0.022109] Movable zone start for each node [ 0.022112] Early memory node ranges [ 0.022114] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.022115] node 0: [mem 0x0000000000100000-0x0000000078726fff] [ 0.022116] node 0: [mem 0x000000007986e000-0x0000000079fa5fff] [ 0.022116] node 0: [mem 0x000000007ac0f000-0x000000007ac0ffff] [ 0.022117] node 0: [mem 0x0000000100000000-0x000000047dffffff] [ 0.022358] Zeroed struct page in unavailable ranges: 29186 pages [ 0.022359] Initmem setup node 0 [mem 0x0000000000001000-0x000000047dffffff] [ 0.022361] On node 0 totalpages: 4156926 [ 0.022362] DMA zone: 64 pages used for memmap [ 0.022362] DMA zone: 23 pages reserved [ 0.022363] DMA zone: 3998 pages, LIFO batch:0 [ 0.022428] DMA32 zone: 7674 pages used for memmap [ 0.022429] DMA32 zone: 491104 pages, LIFO batch:63 [ 0.033623] Normal zone: 57216 pages used for memmap [ 0.033624] Normal zone: 3661824 pages, LIFO batch:63 [ 0.087021] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.087053] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff] [ 0.087395] ACPI: PM-Timer IO Port: 0x1808 [ 0.087397] ACPI: Local APIC address 0xfee00000 [ 0.087404] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.087405] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.087406] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.087406] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.087407] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.087408] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.087408] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.087409] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.087409] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.087410] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.087411] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.087411] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.087473] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.087475] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.087476] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.087477] ACPI: IRQ0 used by override. [ 0.087478] ACPI: IRQ9 used by override. [ 0.087481] Using ACPI (MADT) for SMP configuration information [ 0.087490] smpboot: Allowing 12 CPUs, 0 hotplug CPUs [ 0.087507] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.087509] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.087510] PM: Registered nosave memory: [mem 0x78727000-0x7986dfff] [ 0.087512] PM: Registered nosave memory: [mem 0x79fa6000-0x7a0e9fff] [ 0.087512] PM: Registered nosave memory: [mem 0x7a0ea000-0x7ab44fff] [ 0.087513] PM: Registered nosave memory: [mem 0x7ab45000-0x7ac0efff] [ 0.087514] PM: Registered nosave memory: [mem 0x7ac10000-0x7fffffff] [ 0.087515] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.087516] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.087516] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.087517] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.087517] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.087518] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.087519] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.087519] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.087520] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff] [ 0.087520] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.087521] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.087521] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.087523] [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.087524] Booting paravirtualized kernel on bare hardware [ 0.087527] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.087533] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 [ 0.087909] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.087916] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.087917] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- [ 0.087951] Built 1 zonelists, mobility grouping on. Total pages: 4091949 [ 0.087952] Policy zone: Normal [ 0.087953] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-24-generic root=UUID=f641f756-908c-4b66-95b5-60117eae8296 ro quiet splash nvidia-drm.modeset=1 vt.handoff=7 [ 0.089119] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.089639] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.089766] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.093981] Calgary: detecting Calgary via BIOS EBDA area [ 0.093982] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.130033] Memory: 16146312K/16627704K available (14339K kernel code, 2388K rwdata, 4732K rodata, 2668K init, 5056K bss, 481392K reserved, 0K cma-reserved) [ 0.130190] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.130202] Kernel/User page tables isolation: enabled [ 0.130218] ftrace: allocating 43215 entries in 169 pages [ 0.149223] rcu: Hierarchical RCU implementation. [ 0.149225] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12. [ 0.149226] Tasks RCU enabled. [ 0.149227] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.149228] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.152909] NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16 [ 0.153463] random: crng done (trusting CPU's manufacturer) [ 0.153497] vt handoff: transparent VT on vt#7 [ 0.153503] Console: colour dummy device 80x25 [ 0.153507] printk: console [tty0] enabled [ 0.153525] ACPI: Core revision 20190703 [ 0.153865] APIC: Switch to symmetric I/O mode setup [ 0.153867] DMAR: Host address width 39 [ 0.153868] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.153875] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.153876] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.153879] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.153880] DMAR: RMRR base: 0x0000007a72f000 end: 0x0000007a978fff [ 0.153881] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff [ 0.153883] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.153884] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.153884] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.157041] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.157042] x2apic enabled [ 0.157074] Switched APIC routing to cluster x2apic. [ 0.166203] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.166208] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=8799984) [ 0.166211] pid_max: default: 32768 minimum: 301 [ 0.168715] LSM: Security Framework initializing [ 0.168727] Yama: becoming mindful. [ 0.168781] AppArmor: AppArmor initialized [ 0.168852] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.168878] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.169054] *** VALIDATE proc *** [ 0.169106] *** VALIDATE cgroup1 *** [ 0.169107] *** VALIDATE cgroup2 *** [ 0.169165] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.169198] process: using mwait in idle threads [ 0.169200] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.169201] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.169204] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.169205] Spectre V2 : Mitigation: Full generic retpoline [ 0.169206] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.169206] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.169208] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.169208] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.169210] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.169213] MDS: Mitigation: Clear CPU buffers [ 0.169497] Freeing SMP alternatives memory: 36K [ 0.170206] TSC deadline timer enabled [ 0.170206] smpboot: CPU0: Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz (family: 0x6, model: 0x9e, stepping: 0xa) [ 0.170206] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.170206] ... version: 4 [ 0.170206] ... bit width: 48 [ 0.170206] ... generic registers: 4 [ 0.170206] ... value mask: 0000ffffffffffff [ 0.170206] ... max period: 00007fffffffffff [ 0.170206] ... fixed-purpose events: 3 [ 0.170206] ... event mask: 000000070000000f [ 0.170206] rcu: Hierarchical SRCU implementation. [ 0.170206] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.170206] smp: Bringing up secondary CPUs ... [ 0.170206] x86: Booting SMP configuration: [ 0.170206] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 [ 0.182350] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.182350] #7 #8 #9 #10 #11 [ 0.182861] smp: Brought up 1 node, 12 CPUs [ 0.182861] smpboot: Max logical packages: 1 [ 0.182861] smpboot: Total of 12 processors activated (52799.90 BogoMIPS) [ 0.186640] devtmpfs: initialized [ 0.186640] x86/mm: Memory block size: 128MB [ 0.188038] PM: Registering ACPI NVS region [mem 0x79fa6000-0x7a0e9fff] (1327104 bytes) [ 0.188038] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.188038] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.188038] pinctrl core: initialized pinctrl subsystem [ 0.188038] PM: RTC time: 14:28:36, date: 2019-12-16 [ 0.188038] NET: Registered protocol family 16 [ 0.188038] audit: initializing netlink subsys (disabled) [ 0.188038] audit: type=2000 audit(1576506516.020:1): state=initialized audit_enabled=0 res=1 [ 0.188038] EISA bus registered [ 0.188038] cpuidle: using governor ladder [ 0.188038] cpuidle: using governor menu [ 0.188038] ACPI: bus type PCI registered [ 0.188038] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.188038] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.188038] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.188038] PCI: Using configuration type 1 for base access [ 0.190967] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.191710] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.191710] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.194337] ACPI: Added _OSI(Module Device) [ 0.194337] ACPI: Added _OSI(Processor Device) [ 0.194338] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.194339] ACPI: Added _OSI(Processor Aggregator Device) [ 0.194340] ACPI: Added _OSI(Linux-Dell-Video) [ 0.194341] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.194342] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.268892] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.273505] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.280092] ACPI: Dynamic OEM Table Load: [ 0.280099] ACPI: SSDT 0xFFFF8CB3AB086000 0005BE (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.282382] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.284867] ACPI: Dynamic OEM Table Load: [ 0.284873] ACPI: SSDT 0xFFFF8CB3AAF41800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.287731] ACPI: Dynamic OEM Table Load: [ 0.287738] ACPI: SSDT 0xFFFF8CB3AADCE000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.291169] ACPI: Dynamic OEM Table Load: [ 0.291175] ACPI: SSDT 0xFFFF8CB3AAF47000 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.300178] ACPI: EC: EC started [ 0.300178] ACPI: EC: interrupt blocked [ 0.301792] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC [ 0.301794] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.301795] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions [ 0.301796] ACPI: Interpreter enabled [ 0.301850] ACPI: (supports S0 S3 S4 S5) [ 0.301851] ACPI: Using IOAPIC for interrupt routing [ 0.301905] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.303852] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.305260] ACPI: Power Resource [PG00] (on) [ 0.343797] ACPI: Power Resource [USBC] (on) [ 0.348818] ACPI: Power Resource [V0PR] (on) [ 0.349121] ACPI: Power Resource [V1PR] (on) [ 0.349411] ACPI: Power Resource [V2PR] (on) [ 0.358285] ACPI: Power Resource [WRST] (on) [ 0.367834] ACPI: Power Resource [PIN] (off) [ 0.368523] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.368531] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.373068] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.374260] PCI host bridge to bus 0000:00 [ 0.374263] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.374265] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.374266] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.374267] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.374268] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.374269] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.374270] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.374271] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.374272] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.374273] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] [ 0.374275] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.374286] pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000 [ 0.374835] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 0.374891] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.375215] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000 [ 0.375227] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit] [ 0.375234] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.375238] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.375257] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.375498] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.375510] pci 0000:00:08.0: reg 0x10: [mem 0xa4422000-0xa4422fff 64bit] [ 0.375786] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000 [ 0.375823] pci 0000:00:12.0: reg 0x10: [mem 0xa4421000-0xa4421fff 64bit] [ 0.376152] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 [ 0.376186] pci 0000:00:14.0: reg 0x10: [mem 0xa4400000-0xa440ffff 64bit] [ 0.376298] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.376575] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 [ 0.376603] pci 0000:00:14.2: reg 0x10: [mem 0xa441a000-0xa441bfff 64bit] [ 0.376618] pci 0000:00:14.2: reg 0x18: [mem 0xa4420000-0xa4420fff 64bit] [ 0.376904] pci 0000:00:14.3: [8086:a370] type 00 class 0x028000 [ 0.377081] pci 0000:00:14.3: reg 0x10: [mem 0xa4414000-0xa4417fff 64bit] [ 0.377686] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.378043] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 [ 0.378075] pci 0000:00:16.0: reg 0x10: [mem 0xa441f000-0xa441ffff 64bit] [ 0.378169] pci 0000:00:16.0: PME# supported from D3hot [ 0.378523] pci 0000:00:17.0: [8086:a353] type 00 class 0x010601 [ 0.378553] pci 0000:00:17.0: reg 0x10: [mem 0xa4418000-0xa4419fff] [ 0.378564] pci 0000:00:17.0: reg 0x14: [mem 0xa441e000-0xa441e0ff] [ 0.378576] pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097] [ 0.378588] pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083] [ 0.378600] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f] [ 0.378611] pci 0000:00:17.0: reg 0x24: [mem 0xa441d000-0xa441d7ff] [ 0.378679] pci 0000:00:17.0: PME# supported from D3hot [ 0.379027] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400 [ 0.379205] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.379242] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity [ 0.379575] pci 0000:00:1d.6: [8086:a336] type 01 class 0x060400 [ 0.379750] pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold [ 0.379784] pci 0000:00:1d.6: PTM enabled (root), 4dns granularity [ 0.380078] pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100 [ 0.380555] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300 [ 0.380629] pci 0000:00:1f.3: reg 0x10: [mem 0xa4410000-0xa4413fff 64bit] [ 0.380693] pci 0000:00:1f.3: reg 0x20: [mem 0xa4100000-0xa41fffff 64bit] [ 0.380841] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.381262] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 [ 0.381359] pci 0000:00:1f.4: reg 0x10: [mem 0xa441c000-0xa441c0ff 64bit] [ 0.381465] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.381796] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 [ 0.381818] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.382090] pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030000 [ 0.382106] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff] [ 0.382114] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.382123] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref] [ 0.382128] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f] [ 0.382134] pci 0000:01:00.0: reg 0x30: [mem 0xa4000000-0xa407ffff pref] [ 0.382150] pci 0000:01:00.0: Enabling HDA controller [ 0.382200] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) [ 0.382320] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300 [ 0.382332] pci 0000:01:00.1: reg 0x10: [mem 0xa4080000-0xa4083fff] [ 0.382452] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.382455] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.382457] pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff] [ 0.382460] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref] [ 0.382587] pci 0000:02:00.0: [15b7:5002] type 00 class 0x010802 [ 0.382627] pci 0000:02:00.0: reg 0x10: [mem 0xa4300000-0xa4303fff 64bit] [ 0.382666] pci 0000:02:00.0: reg 0x20: [mem 0xa4304000-0xa43040ff 64bit] [ 0.394274] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.394282] pci 0000:00:1d.0: bridge window [mem 0xa4300000-0xa43fffff] [ 0.394417] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000 [ 0.394447] pci 0000:03:00.0: reg 0x10: [mem 0xa4215000-0xa4215fff] [ 0.394494] pci 0000:03:00.0: reg 0x30: [mem 0xa4200000-0xa420ffff pref] [ 0.394603] pci 0000:03:00.0: supports D1 D2 [ 0.394605] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.394737] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000 [ 0.394769] pci 0000:03:00.1: reg 0x10: [io 0x3000-0x30ff] [ 0.394798] pci 0000:03:00.1: reg 0x18: [mem 0xa4214000-0xa4214fff 64bit] [ 0.394816] pci 0000:03:00.1: reg 0x20: [mem 0xa4210000-0xa4213fff 64bit] [ 0.394931] pci 0000:03:00.1: supports D1 D2 [ 0.394933] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.395099] pci 0000:00:1d.6: PCI bridge to [bus 03] [ 0.395103] pci 0000:00:1d.6: bridge window [io 0x3000-0x3fff] [ 0.395107] pci 0000:00:1d.6: bridge window [mem 0xa4200000-0xa42fffff] [ 0.397274] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0 [ 0.397328] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1 [ 0.397379] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0 [ 0.397431] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0 [ 0.397482] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0 [ 0.397533] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0 [ 0.397584] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0 [ 0.397635] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0 [ 0.398740] ACPI: EC: interrupt unblocked [ 0.398767] ACPI: EC: event unblocked [ 0.398788] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.398789] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events [ 0.398884] SCSI subsystem initialized [ 0.398884] libata version 3.00 loaded. [ 0.398884] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.398884] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.398884] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.398884] pci 0000:00:02.0: vgaarb: no bridge control possible [ 0.398884] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.398884] vgaarb: loaded [ 0.398884] ACPI: bus type USB registered [ 0.398884] usbcore: registered new interface driver usbfs [ 0.398884] usbcore: registered new interface driver hub [ 0.398884] usbcore: registered new device driver usb [ 0.398884] pps_core: LinuxPPS API ver. 1 registered [ 0.398884] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.398884] PTP clock support registered [ 0.398884] EDAC MC: Ver: 3.0.0 [ 0.398884] Registered efivars operations [ 0.398884] PCI: Using ACPI for IRQ routing [ 0.484851] PCI: pci_cache_line_size set to 64 bytes [ 0.484963] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.484965] e820: reserve RAM buffer [mem 0x78727000-0x7bffffff] [ 0.484966] e820: reserve RAM buffer [mem 0x79fa6000-0x7bffffff] [ 0.484967] e820: reserve RAM buffer [mem 0x7ac10000-0x7bffffff] [ 0.484968] e820: reserve RAM buffer [mem 0x47e000000-0x47fffffff] [ 0.485065] NetLabel: Initializing [ 0.485066] NetLabel: domain hash size = 128 [ 0.485067] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.485081] NetLabel: unlabeled traffic allowed by default [ 0.485096] clocksource: Switched to clocksource tsc-early [ 0.494630] VFS: Disk quotas dquot_6.6.0 [ 0.494646] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.494672] *** VALIDATE hugetlbfs *** [ 0.494759] AppArmor: AppArmor Filesystem Enabled [ 0.494784] pnp: PnP ACPI init [ 0.495266] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.495270] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.495275] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.495299] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.495441] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.495445] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.495476] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.495653] pnp 00:04: Plug and Play ACPI device, IDs SYN1222 PNP0f13 (active) [ 0.495837] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.495838] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.495839] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.495841] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.495842] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.495844] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.495845] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.495846] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.495850] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.496180] system 00:06: [io 0x1800-0x18fe] could not be reserved [ 0.496182] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved [ 0.496183] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved [ 0.496185] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.496186] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.496187] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.496189] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.496192] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.496637] system 00:07: [io 0x2000-0x20fe] has been reserved [ 0.496640] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.497044] system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved [ 0.497046] system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved [ 0.497047] system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved [ 0.497048] system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved [ 0.497052] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.498572] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.499767] pnp: PnP ACPI: found 10 devices [ 0.501098] thermal_sys: Registered thermal governor 'fair_share' [ 0.501099] thermal_sys: Registered thermal governor 'bang_bang' [ 0.501099] thermal_sys: Registered thermal governor 'step_wise' [ 0.501100] thermal_sys: Registered thermal governor 'user_space' [ 0.501101] thermal_sys: Registered thermal governor 'power_allocator' [ 0.505605] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.505645] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.505648] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.505651] pci 0000:00:01.0: bridge window [mem 0xa3000000-0xa40fffff] [ 0.505653] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref] [ 0.505657] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.505666] pci 0000:00:1d.0: bridge window [mem 0xa4300000-0xa43fffff] [ 0.505677] pci 0000:00:1d.6: PCI bridge to [bus 03] [ 0.505680] pci 0000:00:1d.6: bridge window [io 0x3000-0x3fff] [ 0.505685] pci 0000:00:1d.6: bridge window [mem 0xa4200000-0xa42fffff] [ 0.505697] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.505698] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.505699] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.505700] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window] [ 0.505701] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window] [ 0.505702] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window] [ 0.505704] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window] [ 0.505705] pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window] [ 0.505706] pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff window] [ 0.505707] pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window] [ 0.505708] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.505709] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff] [ 0.505711] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref] [ 0.505712] pci_bus 0000:02: resource 1 [mem 0xa4300000-0xa43fffff] [ 0.505713] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.505714] pci_bus 0000:03: resource 1 [mem 0xa4200000-0xa42fffff] [ 0.505945] NET: Registered protocol family 2 [ 0.506088] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.506181] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.506398] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.506496] TCP: Hash tables configured (established 131072 bind 65536) [ 0.506583] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.506633] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.506704] NET: Registered protocol family 1 [ 0.506709] NET: Registered protocol family 44 [ 0.506721] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.506843] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.506859] PCI: CLS 64 bytes, default 64 [ 0.506924] Trying to unpack rootfs image as initramfs... [ 0.632635] Freeing initrd memory: 46700K [ 0.658266] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.658271] software IO TLB: mapped [mem 0x7053e000-0x7453e000] (64MB) [ 0.658670] check: Scanning for low memory corruption every 60 seconds [ 0.660851] Initialise system trusted keyrings [ 0.660859] Key type blacklist registered [ 0.660888] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.662283] zbud: loaded [ 0.662675] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.662829] fuse: init (API version 7.31) [ 0.662942] Platform Keyring initialized [ 0.668138] Key type asymmetric registered [ 0.668139] Asymmetric key parser 'x509' registered [ 0.668145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.668189] io scheduler mq-deadline registered [ 0.668602] pcieport 0000:00:01.0: PME: Signaling with IRQ 122 [ 0.668860] pcieport 0000:00:1d.0: PME: Signaling with IRQ 123 [ 0.668928] pcieport 0000:00:1d.0: AER: enabled with IRQ 123 [ 0.668982] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+ [ 0.669302] pcieport 0000:00:1d.6: PME: Signaling with IRQ 124 [ 0.669362] pcieport 0000:00:1d.6: AER: enabled with IRQ 124 [ 0.669412] pcieport 0000:00:1d.6: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+ [ 0.669530] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.669594] efifb: probing for efifb [ 0.669620] efifb: framebuffer at 0x80000000, using 8128k, total 8128k [ 0.669621] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.669621] efifb: scrolling: redraw [ 0.669622] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.669692] Console: switching to colour frame buffer device 240x67 [ 0.669737] fb0: EFI VGA frame buffer device [ 0.669745] intel_idle: MWAIT substates: 0x11142120 [ 0.669746] intel_idle: v0.4.1 model 0x9E [ 0.670460] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.671320] ACPI: AC Adapter [AC] (on-line) [ 0.671399] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.671412] ACPI: Power Button [PWRB] [ 0.672664] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.672670] ACPI: Lid Switch [LID0] [ 0.672700] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.672706] ACPI: Sleep Button [SLPB] [ 0.672735] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.672741] ACPI: Power Button [PWRF] [ 0.673567] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.673568] ACPI: Thermal Zone [TZ0] (25 C) [ 0.673748] battery: ACPI: Battery Slot [BAT0] (battery absent) [ 0.673798] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.675643] hpet_acpi_add: no address or irqs in _CRS [ 0.675697] Linux agpgart interface v0.103 [ 0.694839] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16) [ 0.810667] loop: module loaded [ 0.810909] libphy: Fixed MDIO Bus: probed [ 0.810910] tun: Universal TUN/TAP device driver, 1.6 [ 0.810969] PPP generic driver version 2.4.2 [ 0.811051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.811053] ehci-pci: EHCI PCI platform driver [ 0.811065] ehci-platform: EHCI generic platform driver [ 0.811075] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.811076] ohci-pci: OHCI PCI platform driver [ 0.811084] ohci-platform: OHCI generic platform driver [ 0.811091] uhci_hcd: USB Universal Host Controller Interface driver [ 0.811167] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.811171] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.812290] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810 [ 0.812296] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.812536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.812537] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.812539] usb usb1: Product: xHCI Host Controller [ 0.812540] usb usb1: Manufacturer: Linux 5.3.0-24-generic xhci-hcd [ 0.812541] usb usb1: SerialNumber: 0000:00:14.0 [ 0.812680] hub 1-0:1.0: USB hub found [ 0.812706] hub 1-0:1.0: 16 ports detected [ 0.812794] ACPI Warning: \_SB.PCI0.XHC.RHUB.HS02._UPC: Return Package is too small - found 1 elements, expected 4 (20190703/nsprepkg-362) [ 0.813500] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.813503] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.813506] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.813546] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 0.813547] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.813548] usb usb2: Product: xHCI Host Controller [ 0.813549] usb usb2: Manufacturer: Linux 5.3.0-24-generic xhci-hcd [ 0.813550] usb usb2: SerialNumber: 0000:00:14.0 [ 0.813673] hub 2-0:1.0: USB hub found [ 0.813694] hub 2-0:1.0: 8 ports detected [ 0.814099] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12 [ 0.820383] i8042: Detected active multiplexing controller, rev 1.1 [ 0.823967] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.823971] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.823995] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.824013] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.824030] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.824208] mousedev: PS/2 mouse device common for all mice [ 0.824615] rtc_cmos 00:01: RTC can wake from S4 [ 0.825396] rtc rtc0: invalid alarm value: 2019-12-16T25:28:36 [ 0.825423] rtc_cmos 00:01: registered as rtc0 [ 0.825436] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.825442] i2c /dev entries driver [ 0.825488] device-mapper: uevent: version 1.0.3 [ 0.825539] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 0.825558] platform eisa.0: Probing EISA bus 0 [ 0.825560] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.825561] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.825562] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.825563] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.825564] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.825565] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.825566] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.825567] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.825568] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.825569] platform eisa.0: EISA: Detected 0 cards [ 0.825571] intel_pstate: Intel P-state driver initializing [ 0.825626] intel_pstate: Disabling energy efficiency optimization [ 0.826365] intel_pstate: HWP enabled [ 0.826471] ledtrig-cpu: registered to indicate activity on CPUs [ 0.826473] EFI Variables Facility v0.08 2004-May-17 [ 0.828448] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.854567] intel_pmc_core INT33A1:00: initialized [ 0.854718] NET: Registered protocol family 10 [ 0.860893] Segment Routing with IPv6 [ 0.860906] NET: Registered protocol family 17 [ 0.861065] Key type dns_resolver registered [ 0.862065] RAS: Correctable Errors collector initialized. [ 0.862115] microcode: sig=0x906ea, pf=0x20, revision=0xca [ 0.862496] microcode: Microcode Update Driver: v2.2. [ 0.862501] sched_clock: Marking stable (849701524, 12792244)->(878423205, -15929437) [ 0.862915] registered taskstats version 1 [ 0.862921] Loading compiled-in X.509 certificates [ 0.864357] Loaded X.509 cert 'Build time autogenerated kernel key: ac8e946e076fc9670072220958f4bcb775ad68ce' [ 0.864385] zswap: loaded using pool lzo/zbud [ 0.870919] Key type big_key registered [ 0.870922] Key type trusted registered [ 0.874062] Key type encrypted registered [ 0.874064] AppArmor: AppArmor sha1 policy hashing enabled [ 0.875396] integrity: Loading X.509 certificate: UEFI:db [ 0.875415] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.875415] integrity: Loading X.509 certificate: UEFI:db [ 0.875427] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.876930] ima: Allocated hash algorithm: sha1 [ 1.119011] No architecture policies found [ 1.119025] evm: Initialising EVM extended attributes: [ 1.119025] evm: security.selinux [ 1.119026] evm: security.SMACK64 [ 1.119026] evm: security.SMACK64EXEC [ 1.119026] evm: security.SMACK64TRANSMUTE [ 1.119027] evm: security.SMACK64MMAP [ 1.119027] evm: security.apparmor [ 1.119027] evm: security.ima [ 1.119027] evm: security.capability [ 1.119028] evm: HMAC attrs: 0x1 [ 1.119863] PM: Magic number: 15:649:485 [ 1.120235] rtc_cmos 00:01: setting system clock to 2019-12-16T14:28:37 UTC (1576506517) [ 1.121227] Freeing unused decrypted memory: 2040K [ 1.121618] Freeing unused kernel image memory: 2668K [ 1.146840] Write protecting the kernel read-only data: 22528k [ 1.146842] usb 1-6: new high-speed USB device number 2 using xhci_hcd [ 1.147558] Freeing unused kernel image memory: 2008K [ 1.147958] Freeing unused kernel image memory: 1412K [ 1.154317] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.154317] x86/mm: Checking user space page tables [ 1.160478] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.160479] Run /init as init process [ 1.214759] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02) [ 1.223514] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002) [ 1.223760] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.223843] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.224393] ahci 0000:00:17.0: version 3.0 [ 1.227307] nvme nvme0: pci function 0000:02:00.0 [ 1.234670] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x10 impl SATA mode [ 1.234673] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst [ 1.235237] scsi host0: ahci [ 1.235322] scsi host1: ahci [ 1.235370] scsi host2: ahci [ 1.235421] scsi host3: ahci [ 1.235475] scsi host4: ahci [ 1.235500] ata1: DUMMY [ 1.235500] ata2: DUMMY [ 1.235501] ata3: DUMMY [ 1.235501] ata4: DUMMY [ 1.235506] ata5: SATA max UDMA/133 abar m2048@0xa441d000 port 0xa441d300 irq 127 [ 1.235523] libphy: r8169: probed [ 1.235641] r8169 0000:03:00.1 eth0: RTL8411b, 80:fa:5b:63:10:b4, XID 5c8, IRQ 129 [ 1.235642] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.236123] r8169 0000:03:00.1 enp3s0f1: renamed from eth0 [ 1.295970] usb 1-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 [ 1.295971] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.295971] usb 1-6: Product: USB2.0 Hub [ 1.297174] hub 1-6:1.0: USB hub found [ 1.297545] hub 1-6:1.0: 4 ports detected [ 1.426308] usb 1-8: new high-speed USB device number 3 using xhci_hcd [ 1.445364] nvme nvme0: 12/0/0 default/read/poll queues [ 1.449060] nvme0n1: p1 p2 [ 1.550261] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.552980] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.552981] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.552982] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.553411] ata5.00: supports DRM functions and may not be fully accessible [ 1.554102] ata5.00: ATA-11: Samsung SSD 860 QVO 1TB, RVQ01B6Q, max UDMA/133 [ 1.554103] ata5.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.556839] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.556840] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.556841] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.557254] ata5.00: supports DRM functions and may not be fully accessible [ 1.559777] ata5.00: configured for UDMA/133 [ 1.559889] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 [ 1.560011] ata5.00: Enabling discard_zeroes_data [ 1.560030] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.560034] sd 4:0:0:0: [sda] Write Protect is off [ 1.560034] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.560039] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 1.560040] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.560093] ata5.00: Enabling discard_zeroes_data [ 1.562992] sda: sda1 sda2 sda3 sda4 [ 1.563173] ata5.00: Enabling discard_zeroes_data [ 1.564152] sd 4:0:0:0: [sda] supports TCG Opal [ 1.564153] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.583544] usb 1-8: New USB device found, idVendor=04f2, idProduct=b5ba, bcdDevice=36.04 [ 1.583545] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.583546] usb 1-8: Product: Chicony USB 2.0 Camera [ 1.583546] usb 1-8: Manufacturer: SunplusIT Inc [ 1.654329] usb 1-6.1: new full-speed USB device number 4 using xhci_hcd [ 1.674218] tsc: Refined TSC clocksource calibration: 2207.998 MHz [ 1.674222] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b6211b4, max_idle_ns: 440795230313 ns [ 1.729045] clocksource: Switched to clocksource tsc [ 1.813393] usb 1-6.1: New USB device found, idVendor=08bb, idProduct=29b0, bcdDevice= 1.00 [ 1.813394] usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.813395] usb 1-6.1: Product: USB Audio CODEC [ 1.813396] usb 1-6.1: Manufacturer: Burr-Brown from TI [ 1.934079] usb 1-14: new full-speed USB device number 5 using xhci_hcd [ 2.083423] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02 [ 2.083424] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.162127] usb 1-6.2: new full-speed USB device number 6 using xhci_hcd [ 2.268608] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=23.00 [ 2.268610] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.268610] usb 1-6.2: Product: USB Receiver [ 2.268611] usb 1-6.2: Manufacturer: Logitech [ 2.279516] hidraw: raw HID events driver (C) Jiri Kosina [ 2.284332] usbcore: registered new interface driver usbhid [ 2.284332] usbhid: USB HID core driver [ 2.399006] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.3/0003:08BB:29B0.0001/input/input13 [ 2.462229] hid-generic 0003:08BB:29B0.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-6.1/input3 [ 2.462330] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/0003:046D:C52E.0002/input/input14 [ 2.522873] hid-generic 0003:046D:C52E.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-6.2/input0 [ 2.523026] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.1/0003:046D:C52E.0003/input/input15 [ 2.523279] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.1/0003:046D:C52E.0003/input/input16 [ 2.536715] psmouse serio2: synaptics: queried max coordinates: x [..5674], y [..4764] [ 2.582262] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.1/0003:046D:C52E.0003/input/input17 [ 2.582462] hid-generic 0003:046D:C52E.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6.2/input1 [ 2.660483] psmouse serio2: synaptics: queried min coordinates: x [1266..], y [1086..] [ 2.660500] psmouse serio2: synaptics: Your touchpad (PNP: SYN1222 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 2.671828] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.746032] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 2.757179] systemd[1]: Inserted module 'autofs4' [ 2.829367] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00223/0x840300/0x26800/0x0, board id: 3189, fw id: 2302754 [ 2.829505] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 2.846665] systemd[1]: Detected architecture x86-64. [ 2.848784] systemd[1]: Set hostname to . [ 2.849040] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 2.879778] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input12 [ 2.884203] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 2.924809] systemd[1]: Reached target User and Group Name Lookups. [ 2.924901] systemd[1]: Listening on udev Kernel Socket. [ 2.924955] systemd[1]: Listening on Syslog Socket. [ 2.924987] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.925121] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.934273] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro [ 2.935682] lp: driver loaded but no devices found [ 2.937924] ppdev: user-space parallel port driver [ 3.002111] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 3.076292] input: Intel HID events as /devices/platform/INT33D5:00/input/input22 [ 3.141219] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.143300] IPMI message handler: version 39.2 [ 3.143590] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 3.143591] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.143592] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.143592] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.143593] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.143594] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 3.144110] mc: Linux media interface: v0.10 [ 3.145041] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.146307] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.147217] ipmi device interface [ 3.150353] videodev: Linux video capture interface: v2.00 [ 3.155174] cryptd: max_cpu_qlen set to 1000 [ 3.163918] Bluetooth: Core ver 2.22 [ 3.163933] NET: Registered protocol family 31 [ 3.163934] Bluetooth: HCI device and connection manager initialized [ 3.163937] Bluetooth: HCI socket layer initialized [ 3.163939] Bluetooth: L2CAP socket layer initialized [ 3.163941] Bluetooth: SCO socket layer initialized [ 3.164094] Intel(R) Wireless WiFi driver for Linux [ 3.164095] Copyright(c) 2003- 2015 Intel Corporation [ 3.164160] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) [ 3.169785] AVX2 version of gcm_enc/dec engaged. [ 3.169786] AES CTR mode by8 optimization enabled [ 3.182637] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM [ 3.182641] iwlwifi 0000:00:14.3: Found debug configuration: 0 [ 3.182972] iwlwifi 0000:00:14.3: loaded firmware version 46.6bf1df06.0 op_mode iwlmvm [ 3.250963] systemd-journald[396]: Received request to flush runtime journal from PID 1 [ 3.309302] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b5ba) [ 3.313618] checking generic (80000000 7f0000) vs hw (80000000 10000000) [ 3.313619] fb0: switching to inteldrmfb from EFI VGA [ 3.313750] Console: switching to colour dummy device 80x25 [ 3.313775] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.315125] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.315126] [drm] Driver supports precise vblank timestamp query. [ 3.315299] usbcore: registered new interface driver btusb [ 3.318867] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 3.323179] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015 [ 3.324183] Bluetooth: hci0: Device revision is 2 [ 3.324184] Bluetooth: hci0: Secure boot is enabled [ 3.324185] Bluetooth: hci0: OTP lock is enabled [ 3.324185] Bluetooth: hci0: API lock is enabled [ 3.324186] Bluetooth: hci0: Debug lock is disabled [ 3.324187] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 3.325048] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 3.328320] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized! [ 3.328321] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized! [ 3.328322] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized! [ 3.328323] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized! [ 3.328359] input: Chicony USB 2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input23 [ 3.328402] usbcore: registered new interface driver uvcvideo [ 3.328403] USB Video Class driver (1.1.1) [ 3.340213] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318 [ 3.347808] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi [ 3.348042] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 3.348357] iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor. [ 3.389606] nvidia: loading out-of-tree module taints kernel. [ 3.389613] nvidia: module license 'NVIDIA' taints kernel. [ 3.389614] Disabling lock debugging due to kernel taint [ 3.390792] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 3.391556] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.391990] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input24 [ 3.392064] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 3.392081] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input25 [ 3.394456] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 3.395491] iwlwifi 0000:00:14.3: base HW address: 18:56:80:cd:3f:9d [ 3.397313] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 3.398565] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 3.398658] snd_hda_intel 0000:01:00.1: Disabling MSI [ 3.398661] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 3.399878] nvidia-nvlink: Nvlink Core is being initialized, major device number 236 [ 3.400326] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 3.400408] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none [ 3.405754] usbcore: registered new interface driver snd-usb-audio [ 3.427070] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.427071] fbcon: i915drmfb (fb0) is primary device [ 3.427119] Console: switching to colour frame buffer device 240x67 [ 3.427144] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 3.463634] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 3.463781] thermal thermal_zone2: failed to read out thermal zone (-61) [ 3.466244] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0 [ 3.499812] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 435.21 Sun Aug 25 08:17:57 CDT 2019 [ 3.525374] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 435.21 Sun Aug 25 08:07:52 CDT 2019 [ 3.528044] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 3.528045] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.528046] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 3.528047] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.528047] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.528048] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 3.528048] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 3.528920] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 3.548134] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190703/nsarguments-59) [ 3.550817] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 3.550845] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 3.550868] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 3.550890] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 3.550912] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 3.550933] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31 [ 3.550955] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32 [ 4.062314] intel_rapl_common: Found RAPL domain package [ 4.062316] intel_rapl_common: Found RAPL domain core [ 4.062316] intel_rapl_common: Found RAPL domain uncore [ 4.062322] intel_rapl_common: Found RAPL domain dram [ 4.206248] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input33 [ 4.226981] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.226982] [drm] No driver support for vblank timestamp query. [ 4.227207] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1 [ 4.247494] nvidia-uvm: Loaded the UVM driver, major device number 234. [ 4.544466] audit: type=1400 audit(1576502920.919:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1037 comm="apparmor_parser" [ 4.544490] audit: type=1400 audit(1576502920.919:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1035 comm="apparmor_parser" [ 4.544572] audit: type=1400 audit(1576502920.919:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1032 comm="apparmor_parser" [ 4.544679] audit: type=1400 audit(1576502920.919:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1040 comm="apparmor_parser" [ 4.544681] audit: type=1400 audit(1576502920.919:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1040 comm="apparmor_parser" [ 4.544762] audit: type=1400 audit(1576502920.919:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1038 comm="apparmor_parser" [ 4.544765] audit: type=1400 audit(1576502920.919:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1038 comm="apparmor_parser" [ 4.544863] audit: type=1400 audit(1576502920.919:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1033 comm="apparmor_parser" [ 4.545027] audit: type=1400 audit(1576502920.919:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1039 comm="apparmor_parser" [ 4.859924] Bluetooth: hci0: Waiting for firmware download to complete [ 4.860199] Bluetooth: hci0: Firmware loaded in 1504891 usecs [ 4.860307] Bluetooth: hci0: Waiting for device to boot [ 4.873231] Bluetooth: hci0: Device booted in 12705 usecs [ 4.873482] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc [ 4.876278] Bluetooth: hci0: Applying Intel DDC parameters completed [ 5.621598] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.621600] Bluetooth: BNEP filters: protocol multicast [ 5.621603] Bluetooth: BNEP socket layer initialized [ 5.894242] Generic Realtek PHY r8169-301:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-301:00, irq=IGNORE) [ 6.018092] r8169 0000:03:00.1 enp3s0f1: Link is Down [ 6.030321] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 6.145741] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 6.211278] iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring [ 6.220099] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS [ 7.755640] r8169 0000:03:00.1 enp3s0f1: Link is Up - 100Mbps/Full - flow control rx/tx [ 7.755647] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f1: link becomes ready [ 9.528600] wlo1: authenticate with 98:9b:cb:55:fb:4e [ 9.532008] wlo1: send auth to 98:9b:cb:55:fb:4e (try 1/3) [ 9.572855] wlo1: authenticated [ 9.574355] wlo1: associate with 98:9b:cb:55:fb:4e (try 1/3) [ 9.576855] wlo1: RX AssocResp from 98:9b:cb:55:fb:4e (capab=0x1511 status=0 aid=1) [ 9.580188] wlo1: associated [ 9.617564] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 9.652761] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 98:9b:cb:55:fb:4e [ 11.803928] rfkill: input handler disabled [ 38.010398] rfkill: input handler enabled [ 39.079019] Bluetooth: RFCOMM TTY layer initialized [ 39.079024] Bluetooth: RFCOMM socket layer initialized [ 39.079027] Bluetooth: RFCOMM ver 1.11 [ 47.139206] rfkill: input handler disabled [ 54.922081] usb 1-5: new high-speed USB device number 7 using xhci_hcd [ 55.071638] usb 1-5: New USB device found, idVendor=04a9, idProduct=1746, bcdDevice= 0.05 [ 55.071639] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 55.071640] usb 1-5: Product: MP280 series [ 55.071641] usb 1-5: Manufacturer: Canon [ 55.071641] usb 1-5: SerialNumber: AABF7A [ 55.081347] usblp 1-5:1.1: usblp1: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1746 [ 55.081392] usbcore: registered new interface driver usblp [ 60.439920] usblp1: removed [ 60.442904] usblp 1-5:1.1: usblp1: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1746 [ 133.432528] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 133.432541] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 133.432546] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 133.432550] nvme 0000:02:00.0: AER: [ 0] RxErr [ 176.222231] usblp1: removed [ 271.954752] usblp 1-5:1.1: usblp1: USB Bidirectional printer dev 7 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1746 [ 307.487513] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 307.487523] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 307.487528] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 307.487530] nvme 0000:02:00.0: AER: [ 0] RxErr [ 445.734710] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 445.734720] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 445.734723] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 445.734724] nvme 0000:02:00.0: AER: [ 0] RxErr [ 485.907830] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 485.907839] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 485.907842] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 485.907844] nvme 0000:02:00.0: AER: [ 0] RxErr [ 554.024356] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 554.024371] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 554.024379] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 554.024384] nvme 0000:02:00.0: AER: [ 0] RxErr [ 732.755222] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 732.755228] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 732.755230] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 732.755231] nvme 0000:02:00.0: AER: [ 0] RxErr [ 765.580924] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 765.580929] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 765.580931] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 765.580932] nvme 0000:02:00.0: AER: [ 0] RxErr [ 804.248661] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 804.248676] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 804.248684] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 804.248689] nvme 0000:02:00.0: AER: [ 0] RxErr [ 822.821377] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 822.821387] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 822.821390] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 822.821392] nvme 0000:02:00.0: AER: [ 0] RxErr [ 1042.064418] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 1042.064435] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1042.064445] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 1042.064452] nvme 0000:02:00.0: AER: [ 0] RxErr [ 1339.022705] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 1339.022710] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1339.022712] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 1339.022713] nvme 0000:02:00.0: AER: [ 0] RxErr [ 1458.203047] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 1458.203066] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1458.203076] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 1458.203083] nvme 0000:02:00.0: AER: [ 0] RxErr [ 1623.279865] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 1623.279885] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1623.279896] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 1623.279904] nvme 0000:02:00.0: AER: [ 0] RxErr [ 1634.961364] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 1634.961374] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1634.961378] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 1634.961380] nvme 0000:02:00.0: AER: [ 0] RxErr [ 1687.186163] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 1687.186177] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1687.186185] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 1687.186190] nvme 0000:02:00.0: AER: [ 0] RxErr [ 1947.398578] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 1947.398589] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1947.398595] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 1947.398598] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2055.830820] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2055.830834] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2055.830843] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2055.830848] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2108.497478] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2108.497492] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2108.497500] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2108.497505] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2298.713132] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2298.713137] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2298.713139] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2298.713141] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2328.751958] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2328.751963] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2328.751965] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2328.751967] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2488.873410] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2488.873415] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2488.873418] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2488.873419] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2496.147183] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2496.147197] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2496.147204] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2496.147209] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2706.028773] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2706.028787] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2706.028795] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2706.028800] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2777.312092] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2777.312106] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2777.312114] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2777.312118] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2904.082819] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2904.082828] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2904.082830] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2904.082831] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2919.099069] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2919.099075] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2919.099078] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2919.099080] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2939.096462] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2939.096468] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2939.096470] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2939.096471] nvme 0000:02:00.0: AER: [ 0] RxErr [ 2979.099792] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 2979.099801] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2979.099802] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 2979.099804] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3164.197899] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3164.197909] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3164.197911] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3164.197913] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3209.100736] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3209.100741] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3209.100743] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3209.100744] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3225.788433] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3225.788451] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3225.788462] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3225.788470] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3245.974850] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3245.974864] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3245.974872] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3245.974877] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3359.289903] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3359.289912] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3359.289914] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3359.289916] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3367.962509] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3367.962522] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3367.962530] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3367.962534] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3438.232399] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3438.232413] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3438.232421] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3438.232426] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3550.389416] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3550.389422] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3550.389424] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3550.389425] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3622.554040] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3622.554054] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3622.554062] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3622.554067] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3636.334908] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3636.334931] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3636.334933] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3636.334935] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3754.579607] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3754.579613] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3754.579615] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3754.579616] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3760.795553] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3760.795567] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3760.795575] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3760.795580] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3800.987846] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3800.987860] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3800.987868] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3800.987873] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3811.995597] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3811.995602] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3811.995604] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3811.995605] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3844.645094] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3844.645104] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3844.645107] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3844.645108] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3847.836044] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3847.836058] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3847.836067] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3847.836072] nvme 0000:02:00.0: AER: [ 0] RxErr [ 3868.316440] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 3868.316453] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 3868.316462] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 3868.316467] nvme 0000:02:00.0: AER: [ 0] RxErr [ 4011.627291] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 4011.627308] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4011.627318] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 4011.627324] nvme 0000:02:00.0: AER: [ 0] RxErr [ 4073.118511] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 4073.118524] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4073.118533] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 4073.118538] nvme 0000:02:00.0: AER: [ 0] RxErr [ 4120.990161] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 4120.990175] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4120.990183] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 4120.990188] nvme 0000:02:00.0: AER: [ 0] RxErr [ 4224.261563] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 4224.261578] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4224.261586] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 4224.261591] nvme 0000:02:00.0: AER: [ 0] RxErr [ 4234.908760] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 4234.908771] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4234.908774] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 4234.908776] nvme 0000:02:00.0: AER: [ 0] RxErr [ 4525.073948] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 4525.073958] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4525.073960] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 4525.073961] nvme 0000:02:00.0: AER: [ 0] RxErr [ 4653.093564] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 4653.093575] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4653.093577] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 4653.093579] nvme 0000:02:00.0: AER: [ 0] RxErr [ 4675.095397] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 4675.095402] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4675.095404] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 4675.095405] nvme 0000:02:00.0: AER: [ 0] RxErr [ 4806.026453] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 4806.026458] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4806.026460] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 4806.026461] nvme 0000:02:00.0: AER: [ 0] RxErr [ 4841.106404] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 4841.106418] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4841.106426] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 4841.106431] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5019.352823] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5019.352828] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5019.352830] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5019.352831] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5158.546088] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5158.546102] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5158.546109] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5158.546114] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5160.331901] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5160.331914] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5160.331920] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5160.331923] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5244.253256] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5244.253274] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5244.253284] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5244.253291] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5367.994667] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5367.994681] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5367.994689] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5367.994695] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5495.578866] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5495.578872] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5495.578874] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5495.578875] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5527.954782] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5527.954796] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5527.954805] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5527.954810] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5570.634210] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5570.634216] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5570.634218] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5570.634219] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5575.299515] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5575.299529] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5575.299538] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5575.299543] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5580.642521] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5580.642526] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5580.642528] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5580.642530] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5583.279359] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5583.279373] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5583.279381] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5583.279386] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5617.063923] pcieport 0000:00:1d.0: AER: Corrected error received: 0000:02:00.0 [ 5617.063935] nvme 0000:02:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 5617.063942] nvme 0000:02:00.0: AER: device [15b7:5002] error status/mask=00000001/0000e000 [ 5617.063946] nvme 0000:02:00.0: AER: [ 0] RxErr [ 5637.462830] mce: CPU8: Core temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462830] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462831] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462832] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462833] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462834] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462835] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462835] mce: CPU9: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462837] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462838] mce: CPU8: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462875] mce: CPU10: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462876] mce: CPU11: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462877] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.462877] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1) [ 5637.463811] mce: CPU2: Core temperature/speed normal [ 5637.463811] mce: CPU8: Core temperature/speed normal [ 5637.463812] mce: CPU9: Package temperature/speed normal [ 5637.463813] mce: CPU3: Package temperature/speed normal [ 5637.463813] mce: CPU0: Package temperature/speed normal [ 5637.463814] mce: CPU6: Package temperature/speed normal [ 5637.463815] mce: CPU7: Package temperature/speed normal [ 5637.463816] mce: CPU1: Package temperature/speed normal [ 5637.463816] mce: CPU4: Package temperature/speed normal [ 5637.463817] mce: CPU10: Package temperature/speed normal [ 5637.463817] mce: CPU5: Package temperature/speed normal [ 5637.463818] mce: CPU11: Package temperature/speed normal [ 5637.463818] mce: CPU8: Package temperature/speed normal [ 5637.463819] mce: CPU2: Package temperature/speed normal