qemu 1:2.5+dfsg-5ubuntu10.6 source package in Ubuntu
Changelog
qemu (1:2.5+dfsg-5ubuntu10.6) xenial-security; urgency=medium
* SECURITY UPDATE: DoS via unbounded memory allocation
- debian/patches/CVE-2016-5403.patch: re-enable original patch.
- debian/patches/CVE-2016-5403-2.patch: recalculate vq->inuse after
migration in hw/virtio/virtio.c.
- debian/patches/CVE-2016-5403-3.patch: decrement vq->inuse in
virtqueue_discard() in hw/virtio/virtio.c.
- debian/patches/CVE-2016-5403-4.patch: zero vq->inuse in
virtio_reset() in hw/virtio/virtio.c.
- CVE-2016-5403
* SECURITY UPDATE: use after free while writing in vmxnet3
- debian/patches/CVE-2016-6833.patch: check for device_active before
write in hw/net/vmxnet3.c.
- CVE-2016-6833
* SECURITY UPDATE: DoS via infinite loop during packet fragmentation
- debian/patches/CVE-2016-6834.patch: check fragment length during
fragmentation in hw/net/vmxnet_tx_pkt.c.
- CVE-2016-6834
* SECURITY UPDATE: Buffer overflow in vmxnet_tx_pkt_parse_headers()
- debian/patches/CVE-2016-6835.patch: check IP header length in
hw/net/vmxnet_tx_pkt.c.
- CVE-2016-6835
* SECURITY UPDATE: Information leak in vmxnet3_complete_packet
- debian/patches/CVE-2016-6836.patch: initialise local tx descriptor in
hw/net/vmxnet3.c.
- CVE-2016-6836
* SECURITY UPDATE: Integer overflow in packet initialisation in VMXNET3
- debian/patches/CVE-2016-6888.patch: use g_new for pkt initialisation
in hw/net/vmxnet_tx_pkt.c.
- CVE-2016-6888
* SECURITY UPDATE: directory traversal flaw in 9p virtio backend
- debian/patches/CVE-2016-7116-1.patch: forbid illegal path names in
hw/9pfs/virtio-9p.c.
- debian/patches/CVE-2016-7116-2.patch: forbid . and .. in file names
in hw/9pfs/virtio-9p.c.
- debian/patches/CVE-2016-7116-3.patch: handle walk of ".." in the root
directory in hw/9pfs/virtio-9p.*.
- debian/patches/CVE-2016-7116-4.patch: fix potential segfault during
walk in hw/9pfs/virtio-9p.c.
- CVE-2016-7116
* SECURITY UPDATE: OOB read and infinite loop in pvscsi
- debian/patches/CVE-2016-7155.patch: check page count while
initialising descriptor rings in hw/scsi/vmw_pvscsi.c.
- CVE-2016-7155
* SECURITY UPDATE: infinite loop when building SG list in pvscsi
- debian/patches/CVE-2016-7156.patch: limit loop to fetch SG list in
hw/scsi/vmw_pvscsi.c.
- CVE-2016-7156
* SECURITY UPDATE: buffer overflow in xlnx.xps-ethernetlite
- debian/patches/CVE-2016-7161.patch: fix a heap overflow in
hw/net/xilinx_ethlite.c.
- CVE-2016-7161
* SECURITY UPDATE: OOB stack memory access in vmware_vga
- debian/patches/CVE-2016-7170.patch: correct bitmap and pixmap size
checks in hw/display/vmware_vga.c.
- CVE-2016-7170
* SECURITY UPDATE: Infinite loop when processing IO requests in pvscsi
- debian/patches/CVE-2016-7421.patch: limit process IO loop to ring
size in hw/scsi/vmw_pvscsi.c.
- CVE-2016-7421
* SECURITY UPDATE: memory leakage during device unplug in xhci
- debian/patches/CVE-2016-7466.patch: fix memory leak in usb_xhci_exit
in hw/usb/hcd-xhci.c.
- CVE-2016-7466
* SECURITY UPDATE: denial of service in mcf via invalid count
- debian/patches/CVE-2016-7908.patch: limit buffer descriptor count in
hw/net/mcf_fec.c.
- CVE-2016-7908
* SECURITY UPDATE: denial of service in pcnet via invalid length
- debian/patches/CVE-2016-7909.patch: check rx/tx descriptor ring
length in hw/net/pcnet.c.
- CVE-2016-7909
* SECURITY UPDATE: denial of service via memory leak in virtio-gpu
- debian/patches/CVE-2016-7994.patch: fix memory leak in
virtio_gpu_resource_create_2d in hw/display/virtio-gpu.c.
- CVE-2016-7994
* SECURITY UPDATE: denial of service via infinite loop in xhci
- debian/patches/CVE-2016-8576.patch: limit the number of link trbs we
are willing to process in hw/usb/hcd-xhci.c.
- CVE-2016-8576
* SECURITY UPDATE: host memory leakage in 9pfs
- debian/patches/CVE-2016-8577.patch: fix potential host memory leak in
v9fs_read in hw/9pfs/virtio-9p.c.
- CVE-2016-8577
* SECURITY UPDATE: NULL dereference in 9pfs
- debian/patches/CVE-2016-8578.patch: allocate space for guest
originated empty strings in fsdev/virtio-9p-marshal.c,
hw/9pfs/virtio-9p.c.
- CVE-2016-8578
* SECURITY UPDATE: OOB buffer access in rocker switch emulation
- debian/patches/CVE-2016-8668.patch: set limit to DMA buffer size in
hw/net/rocker/rocker.c.
- CVE-2016-8668
* SECURITY UPDATE: infinite loop in Intel HDA controller
- debian/patches/CVE-2016-8909.patch: check stream entry count during
transfer in hw/audio/intel-hda.c.
- CVE-2016-8909
* SECURITY UPDATE: infinite loop in RTL8139 ethernet controller
- debian/patches/CVE-2016-8910.patch: limit processing of ring
descriptors in hw/net/rtl8139.c.
- CVE-2016-8910
* SECURITY UPDATE: memory leakage at device unplug in eepro100
- debian/patches/CVE-2016-9101.patch: fix memory leak in device uninit
in hw/net/eepro100.c.
- CVE-2016-9101
* SECURITY UPDATE: denial of service via memory leak in 9pfs
- debian/patches/CVE-2016-9102.patch: fix memory leak in
v9fs_xattrcreate in hw/9pfs/virtio-9p.c.
- CVE-2016-9102
* SECURITY UPDATE: information leakage via xattribute in 9pfs
- debian/patches/CVE-2016-9103.patch: fix information leak in xattr
read in hw/9pfs/virtio-9p.c.
- CVE-2016-9103
* SECURITY UPDATE: integer overflow leading to OOB access in 9pfs
- debian/patches/CVE-2016-9104.patch: fix integer overflow issue in
xattr read/write in hw/9pfs/virtio-9p.c.
- CVE-2016-9104
* SECURITY UPDATE: denial of service via memory leakage in 9pfs
- debian/patches/CVE-2016-9105.patch: fix memory leak in v9fs_link in
hw/9pfs/virtio-9p.c.
- CVE-2016-9105
* SECURITY UPDATE: denial of service via memory leakage in 9pfs
- debian/patches/CVE-2016-9106.patch: fix memory leak in v9fs_write in
hw/9pfs/virtio-9p.c.
- CVE-2016-9106
-- Marc Deslauriers <email address hidden> Mon, 07 Nov 2016 11:17:16 -0500
Upload details
- Uploaded by:
- Marc Deslauriers
- Uploaded to:
- Xenial
- Original maintainer:
- Ubuntu Developers
- Architectures:
- any
- Section:
- otherosfs
- Urgency:
- Medium Urgency
See full publishing history Publishing
| Series | Published | Component | Section |
|---|
Downloads
| File | Size | SHA-256 Checksum |
|---|---|---|
| qemu_2.5+dfsg.orig.tar.xz | 5.6 MiB | 7507dc37281ac7a42e13fff062a88e8742734d42fad2b6c2aeb6cc96060b120a |
| qemu_2.5+dfsg-5ubuntu10.6.debian.tar.xz | 121.5 KiB | 3d72bfc7bab01a35d5c2373e1df5f82503f483b3d47f87c8472590103e970ade |
| qemu_2.5+dfsg-5ubuntu10.6.dsc | 6.1 KiB | 8c6fa250e314ec00e9d7c22d83863453c4fa2933bd117c941183852f165b736f |
Available diffs
Binary packages built by this source
- qemu: fast processor emulator
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs. QEMU has
two operating modes:
.
* User mode emulation: QEMU can launch Linux processes compiled for
one CPU on another CPU.
* Full system emulation: QEMU emulates a full system, including a
processor and various peripherals. It enables easier testing and
debugging of system code. It can also be used to provide virtual
hosting of several virtual machines on a single server.
.
As QEMU requires no host kernel patches to run, it is very safe and
easy to use.
.
This package is a metapackage depending on all qemu-related packages.
- qemu-block-extra: extra block backend modules for qemu-system and qemu-utils
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides extra block device backend modules for qemu-system
emulation and qemu-img from qemu-utils package, which are rarely used and
has extra dependencies.
- qemu-block-extra-dbgsym: debug symbols for package qemu-block-extra
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides extra block device backend modules for qemu-system
emulation and qemu-img from qemu-utils package, which are rarely used and
has extra dependencies.
- qemu-guest-agent: Guest-side qemu-system agent
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides a daemon (agent) to run inside qemu-system
guests (full system emulation). It communicates with the host using
a virtio-serial channel org.qemu.guest_agent. 0, and allows one to perform
some functions in the guest from the host, including:
- querying and setting guest system time
- performing guest filesystem sync operation
- initiating guest shutdown or suspend to ram
- accessing guest files
- freezing/thawing guest filesystem operations
- others.
.
Install this package on a system which is running as guest inside
qemu virtual machine. It is not used on the host.
- qemu-guest-agent-dbgsym: debug symbols for package qemu-guest-agent
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides a daemon (agent) to run inside qemu-system
guests (full system emulation). It communicates with the host using
a virtio-serial channel org.qemu.guest_agent. 0, and allows one to perform
some functions in the guest from the host, including:
- querying and setting guest system time
- performing guest filesystem sync operation
- initiating guest shutdown or suspend to ram
- accessing guest files
- freezing/thawing guest filesystem operations
- others.
.
Install this package on a system which is running as guest inside
qemu virtual machine. It is not used on the host.
- qemu-kvm: QEMU Full virtualization
QEMU is a fast processor emulator. This package depends on the
appropriate qemu-system-$arch to enable KVM to be run. It also
includes a script /usr/bin/kvm which runs the appropriate
qemu-system-$arch in kvm mode.
.
Please note that old qemu-kvm configuration files (in /etc/kvm/) are
no longer used.
- qemu-system: QEMU full system emulation binaries
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This metapackage provides the full system emulation binaries for all supported
targets, by depending on all per-architecture system emulation packages which
QEMU supports.
- qemu-system-aarch64: QEMU full system emulation binaries (aarch64)
QEMU is a fast processor emulator: currently the package supports
ARM emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This is a transition package as qemu-system-aarch64 has been moved into
qemu-system-arm.
- qemu-system-arm: QEMU full system emulation binaries (arm)
QEMU is a fast processor emulator: currently the package supports
ARM emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following arm hardware: aarch64 arm.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-arm-dbgsym: debug symbols for package qemu-system-arm
QEMU is a fast processor emulator: currently the package supports
ARM emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following arm hardware: aarch64 arm.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-common: QEMU full system emulation binaries (common files)
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides common files needed for target-specific
full system emulation (qemu-system-*) packages.
- qemu-system-common-dbgsym: debug symbols for package qemu-system-common
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides common files needed for target-specific
full system emulation (qemu-system-*) packages.
- qemu-system-mips: QEMU full system emulation binaries (mips)
QEMU is a fast processor emulator: currently the package supports
MIPS emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following mips hardware: mips mipsel mips64 mips64el.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-mips-dbgsym: debug symbols for package qemu-system-mips
QEMU is a fast processor emulator: currently the package supports
MIPS emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following mips hardware: mips mipsel mips64 mips64el.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-misc: QEMU full system emulation binaries (miscelaneous)
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, M68k (ColdFire), MicroBlaze, and SH4
emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
various other hardware which did not made into separate packages.
Emulators for the following architectures are provided:
alpha cris lm32 m68k microblaze microblazeel moxie or32 sh4 sh4eb tricore xtensa xtensaeb unicore32.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-misc-dbgsym: debug symbols for package qemu-system-misc
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, M68k (ColdFire), MicroBlaze, and SH4
emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
various other hardware which did not made into separate packages.
Emulators for the following architectures are provided:
alpha cris lm32 m68k microblaze microblazeel moxie or32 sh4 sh4eb tricore xtensa xtensaeb unicore32.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-ppc: QEMU full system emulation binaries (ppc)
QEMU is a fast processor emulator: currently the package supports
PowerPC emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following PowerPC hardware: ppc ppcemb ppc64.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-ppc-dbgsym: debug symbols for package qemu-system-ppc
QEMU is a fast processor emulator: currently the package supports
PowerPC emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following PowerPC hardware: ppc ppcemb ppc64.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-s390x: QEMU full system emulation binaries (s390x)
QEMU is a fast processor emulator: currently the package supports
s390x emulation. By using dynamic translation it achieves reasonable
speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following s390x hardware: s390x.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-s390x-dbgsym: debug symbols for package qemu-system-s390x
QEMU is a fast processor emulator: currently the package supports
s390x emulation. By using dynamic translation it achieves reasonable
speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following s390x hardware: s390x.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-sparc: QEMU full system emulation binaries (sparc)
QEMU is a fast processor emulator: currently the package supports
SPARC emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following sparc hardware: sparc sparc64.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-sparc-dbgsym: debug symbols for package qemu-system-sparc
QEMU is a fast processor emulator: currently the package supports
SPARC emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following sparc hardware: sparc sparc64.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
- qemu-system-x86: QEMU full system emulation binaries (x86)
QEMU is a fast processor emulator: currently the package supports
i386 and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following x86 hardware: i386 x86_64.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
.
On x86 host hardware this package also enables KVM kernel virtual machine
usage on systems which supports it.
- qemu-system-x86-dbgsym: debug symbols for package qemu-system-x86
QEMU is a fast processor emulator: currently the package supports
i386 and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the full system emulation binaries to emulate
the following x86 hardware: i386 x86_64.
.
In system emulation mode QEMU emulates a full system, including a processor
and various peripherals. It enables easier testing and debugging of system
code. It can also be used to provide virtual hosting of several virtual
machines on a single server.
.
On x86 host hardware this package also enables KVM kernel virtual machine
usage on systems which supports it.
- qemu-user: QEMU user mode emulation binaries
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the user mode emulation binaries. In this mode
QEMU can launch Linux processes compiled for one CPU on another CPU.
.
If qemu-user-binfmt package is also installed, it will register binary
format handlers from this qemu-user package with the kernel so it will
be possible to run foreign binaries directly. However, this might not
be suitable for using inside foreign chroots, in which case it is
possible to use qemu-user-static package instead of qemu-user-binmft, --
qemu-user-static will register statically linked binfmt handlers instead.
- qemu-user-binfmt: QEMU user mode binfmt registration for qemu-user
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides binfmt support registration for the user mode
emulation binaries from qemu-user. This is an empty package, it does
not contain any additional files, only registration scripts which run
at install and remove times.
- qemu-user-dbgsym: debug symbols for package qemu-user
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the user mode emulation binaries. In this mode
QEMU can launch Linux processes compiled for one CPU on another CPU.
.
If qemu-user-binfmt package is also installed, it will register binary
format handlers from this qemu-user package with the kernel so it will
be possible to run foreign binaries directly. However, this might not
be suitable for using inside foreign chroots, in which case it is
possible to use qemu-user-static package instead of qemu-user-binmft, --
qemu-user-static will register statically linked binfmt handlers instead.
- qemu-user-static: QEMU user mode emulation binaries (static version)
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the user mode emulation binaries, built
statically. In this mode QEMU can launch Linux processes compiled for
one CPU on another CPU.
.
If binfmt-support package is installed, qemu-user-static package will
register binary formats which the provided emulators can handle, so
that it will be possible to run foreign binaries directly.
- qemu-user-static-dbgsym: debug symbols for package qemu-user-static
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides the user mode emulation binaries, built
statically. In this mode QEMU can launch Linux processes compiled for
one CPU on another CPU.
.
If binfmt-support package is installed, qemu-user-static package will
register binary formats which the provided emulators can handle, so
that it will be possible to run foreign binaries directly.
- qemu-utils: QEMU utilities
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides QEMU related utilities:
* qemu-img: QEMU disk image utility
* qemu-io: QEMU disk exerciser
* qemu-nbd: QEMU disk network block device server
- qemu-utils-dbgsym: debug symbols for package qemu-utils
QEMU is a fast processor emulator: currently the package supports
ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
SPARC and x86-64 emulation. By using dynamic translation it achieves
reasonable speed while being easy to port on new host CPUs.
.
This package provides QEMU related utilities:
* qemu-img: QEMU disk image utility
* qemu-io: QEMU disk exerciser
* qemu-nbd: QEMU disk network block device server
