[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 0.000000] Linux version 4.15.0-108-generic (buildd@lcy01-amd64-013) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #109-Ubuntu SMP Fri Jun 19 11:33:10 UTC 2020 (Ubuntu 4.15.0-108.109-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-108-generic root=UUID=d40a86d5-61ae-486e-8ddf-9581c538d64e ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf585fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf586000-0x00000000bf5dafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf5db000-0x00000000bf606fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf607000-0x00000000bf607fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf608000-0x00000000bf608fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf609000-0x00000000bf612fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf613000-0x00000000bf637fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf638000-0x00000000bf67afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf67b000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Pro3, BIOS P1.60 07/13/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 base 23F800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 8184M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcf40-0x000fcf4f] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] BRK [0x202395000, 0x202395fff] PGTABLE [ 0.000000] BRK [0x202396000, 0x202396fff] PGTABLE [ 0.000000] BRK [0x202397000, 0x202397fff] PGTABLE [ 0.000000] BRK [0x202398000, 0x202398fff] PGTABLE [ 0.000000] BRK [0x202399000, 0x202399fff] PGTABLE [ 0.000000] BRK [0x20239a000, 0x20239afff] PGTABLE [ 0.000000] BRK [0x20239b000, 0x20239bfff] PGTABLE [ 0.000000] BRK [0x20239c000, 0x20239cfff] PGTABLE [ 0.000000] BRK [0x20239d000, 0x20239dfff] PGTABLE [ 0.000000] BRK [0x20239e000, 0x20239efff] PGTABLE [ 0.000000] BRK [0x20239f000, 0x20239ffff] PGTABLE [ 0.000000] BRK [0x2023a0000, 0x2023a0fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x330af000-0x3584efff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BF5D3068 000054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BF5DA3A8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BF5D3150 007253 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BF60AF80 000040 [ 0.000000] ACPI: APIC 0x00000000BF5DA4A0 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000BF5DA538 0001D6 (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 0x00000000BF5DA710 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: AAFT 0x00000000BF5DA750 0000D3 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BF5DA828 000038 (v01 ALASKA A M I 01072009 AMI. 00000004) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x23f7d4000-0x23f7fefff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023f7fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf585fff] [ 0.000000] node 0: [mem 0x00000000bf607000-0x00000000bf607fff] [ 0.000000] node 0: [mem 0x00000000bf67b000-0x00000000bf7fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023f7fffff] [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023f7fffff] [ 0.000000] On node 0 totalpages: 2092712 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12189 pages used for memmap [ 0.000000] DMA32 zone: 780044 pages, LIFO batch:31 [ 0.000000] Normal zone: 20448 pages used for memmap [ 0.000000] Normal zone: 1308672 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf586000-0xbf5dafff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf5db000-0xbf606fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf608000-0xbf608fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf609000-0xbf612fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf613000-0xbf637fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf638000-0xbf67afff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2059990 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-108-generic root=UUID=d40a86d5-61ae-486e-8ddf-9581c538d64e ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8103200K/8370848K available (12300K kernel code, 2481K rwdata, 4272K rodata, 2436K init, 2720K bss, 267648K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39378 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 3192.883 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.76 BogoMIPS (lpj=12771532) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028440] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028468] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028484] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028658] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.028659] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.028669] CPU0: Thermal monitoring enabled (TM1) [ 0.028679] process: using mwait in idle threads [ 0.028681] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.028681] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.028682] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.028684] Spectre V2 : Mitigation: Full generic retpoline [ 0.028684] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.028684] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.028692] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.028692] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.028693] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.028716] MDS: Mitigation: Clear CPU buffers [ 0.028859] Freeing SMP alternatives memory: 36K [ 0.032060] TSC deadline timer enabled [ 0.032063] smpboot: CPU0: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.032122] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.032140] ... version: 3 [ 0.032140] ... bit width: 48 [ 0.032140] ... generic registers: 4 [ 0.032141] ... value mask: 0000ffffffffffff [ 0.032142] ... max period: 00007fffffffffff [ 0.032142] ... fixed-purpose events: 3 [ 0.032142] ... event mask: 000000070000000f [ 0.032174] Hierarchical SRCU implementation. [ 0.033046] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.033060] smp: Bringing up secondary CPUs ... [ 0.033128] x86: Booting SMP configuration: [ 0.033129] .... node #0, CPUs: #1 #2 #3 #4 [ 0.044116] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.044201] #5 #6 #7 [ 0.050419] smp: Brought up 1 node, 8 CPUs [ 0.050419] smpboot: Max logical packages: 1 [ 0.050419] smpboot: Total of 8 processors activated (51086.12 BogoMIPS) [ 0.052292] devtmpfs: initialized [ 0.052292] x86/mm: Memory block size: 128MB [ 0.052571] evm: security.selinux [ 0.052571] evm: security.SMACK64 [ 0.052572] evm: security.SMACK64EXEC [ 0.052572] evm: security.SMACK64TRANSMUTE [ 0.052572] evm: security.SMACK64MMAP [ 0.052573] evm: security.apparmor [ 0.052573] evm: security.ima [ 0.052574] evm: security.capability [ 0.052585] PM: Registering ACPI NVS region [mem 0xbf586000-0xbf5dafff] (348160 bytes) [ 0.052585] PM: Registering ACPI NVS region [mem 0xbf609000-0xbf612fff] (40960 bytes) [ 0.052585] PM: Registering ACPI NVS region [mem 0xbf638000-0xbf67afff] (274432 bytes) [ 0.052585] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.052585] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.052585] pinctrl core: initialized pinctrl subsystem [ 0.052585] RTC time: 8:35:31, date: 06/28/20 [ 0.052585] NET: Registered protocol family 16 [ 0.052585] audit: initializing netlink subsys (disabled) [ 0.052585] audit: type=2000 audit(1593333331.052:1): state=initialized audit_enabled=0 res=1 [ 0.052585] cpuidle: using governor ladder [ 0.052585] cpuidle: using governor menu [ 0.052585] ACPI: bus type PCI registered [ 0.052585] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.052585] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.052585] PCI: not using MMCONFIG [ 0.052585] PCI: Using configuration type 1 for base access [ 0.052585] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.053040] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.053040] ACPI: Added _OSI(Module Device) [ 0.053040] ACPI: Added _OSI(Processor Device) [ 0.053040] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.053040] ACPI: Added _OSI(Processor Aggregator Device) [ 0.053040] ACPI: Added _OSI(Linux-Dell-Video) [ 0.053040] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.053040] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.053040] ACPI: Executed 1 blocks of module-level executable AML code [ 0.058845] ACPI: Dynamic OEM Table Load: [ 0.058850] ACPI: SSDT 0xFFFF9CEF755FD800 0006F4 (v01 AMI IST 00000001 MSFT 03000001) [ 0.059244] ACPI: Dynamic OEM Table Load: [ 0.059246] ACPI: SSDT 0xFFFF9CEF7504A300 0000E4 (v01 AMI CST 00000001 MSFT 03000001) [ 0.060573] ACPI: Interpreter enabled [ 0.060588] ACPI: (supports S0 S1 S3 S4 S5) [ 0.060589] ACPI: Using IOAPIC for interrupt routing [ 0.060616] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.060694] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.060705] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.060934] ACPI: GPE 0x1B active on init [ 0.060946] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.060951] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.067720] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.067724] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.067906] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug] [ 0.068080] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.068387] PCI host bridge to bus 0000:00 [ 0.068389] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.068390] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.068391] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.068391] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff window] [ 0.068392] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.068394] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.068400] pci 0000:00:00.0: [8086:0108] type 00 class 0x060000 [ 0.068477] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.068506] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.068613] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.068648] pci 0000:00:16.0: reg 0x10: [mem 0xfa208000-0xfa20800f 64bit] [ 0.068748] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.068832] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.068861] pci 0000:00:1a.0: reg 0x10: [mem 0xfa207000-0xfa2073ff] [ 0.068978] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.069054] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.069084] pci 0000:00:1b.0: reg 0x10: [mem 0xfa200000-0xfa203fff 64bit] [ 0.069190] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.069266] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.069384] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.069468] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401 [ 0.069585] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.069665] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 0.069783] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.069863] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 0.069981] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.070061] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 0.070179] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.070259] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.070289] pci 0000:00:1d.0: reg 0x10: [mem 0xfa206000-0xfa2063ff] [ 0.070406] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.070480] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100 [ 0.070691] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.070718] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.070728] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.070738] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.070749] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.070759] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.070769] pci 0000:00:1f.2: reg 0x24: [mem 0xfa205000-0xfa2057ff] [ 0.070831] pci 0000:00:1f.2: PME# supported from D3hot [ 0.070897] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.070922] pci 0000:00:1f.3: reg 0x10: [mem 0xfa204000-0xfa2040ff 64bit] [ 0.070952] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.071065] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000 [ 0.071079] pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff] [ 0.071086] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.071094] pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xdbffffff 64bit pref] [ 0.071099] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.071105] pci 0000:01:00.0: reg 0x30: [mem 0xfa000000-0xfa07ffff pref] [ 0.071109] pci 0000:01:00.0: enabling Extended Tags [ 0.071175] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300 [ 0.071187] pci 0000:01:00.1: reg 0x10: [mem 0xfa080000-0xfa083fff] [ 0.071217] pci 0000:01:00.1: enabling Extended Tags [ 0.080019] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.080024] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.080027] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff] [ 0.080031] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref] [ 0.080111] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.080203] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401 [ 0.080381] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode) [ 0.080394] pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.080395] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.080395] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.080396] pci 0000:00:1c.4: bridge window [mem 0x000c8000-0x000dffff window] (subtractive decode) [ 0.080397] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.080527] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode) [ 0.080553] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.080554] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.080555] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.080556] pci 0000:03:00.0: bridge window [mem 0x000c8000-0x000dffff window] (subtractive decode) [ 0.080557] pci 0000:03:00.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.080641] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.080684] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.080726] pci 0000:05:00.0: reg 0x18: [mem 0xdc104000-0xdc104fff 64bit pref] [ 0.080752] pci 0000:05:00.0: reg 0x20: [mem 0xdc100000-0xdc103fff 64bit pref] [ 0.080892] pci 0000:05:00.0: supports D1 D2 [ 0.080893] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092033] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.092039] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.092051] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref] [ 0.092135] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.092185] pci 0000:06:00.0: reg 0x10: [mem 0xfa100000-0xfa107fff 64bit] [ 0.092273] pci 0000:06:00.0: enabling Extended Tags [ 0.092363] pci 0000:06:00.0: supports D1 D2 [ 0.092364] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.108031] pci 0000:00:1c.6: PCI bridge to [bus 06] [ 0.108040] pci 0000:00:1c.6: bridge window [mem 0xfa100000-0xfa1fffff] [ 0.108110] pci 0000:00:1c.7: PCI bridge to [bus 07] [ 0.108819] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.108878] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.108935] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.108992] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.109048] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.109105] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.109162] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.109219] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.109442] SCSI subsystem initialized [ 0.109453] libata version 3.00 loaded. [ 0.109453] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.109453] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.109453] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.109453] vgaarb: loaded [ 0.109453] ACPI: bus type USB registered [ 0.109453] usbcore: registered new interface driver usbfs [ 0.109453] usbcore: registered new interface driver hub [ 0.109453] usbcore: registered new device driver usb [ 0.109453] EDAC MC: Ver: 3.0.0 [ 0.109453] PCI: Using ACPI for IRQ routing [ 0.119887] PCI: pci_cache_line_size set to 64 bytes [ 0.119948] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.119949] e820: reserve RAM buffer [mem 0xbf586000-0xbfffffff] [ 0.119950] e820: reserve RAM buffer [mem 0xbf608000-0xbfffffff] [ 0.119951] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.119952] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff] [ 0.120024] NetLabel: Initializing [ 0.120025] NetLabel: domain hash size = 128 [ 0.120025] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.120037] NetLabel: unlabeled traffic allowed by default [ 0.120482] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.120485] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.122511] clocksource: Switched to clocksource hpet [ 0.128252] VFS: Disk quotas dquot_6.6.0 [ 0.128268] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.128345] AppArmor: AppArmor Filesystem Enabled [ 0.128371] pnp: PnP ACPI init [ 0.128539] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.128540] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.128541] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.128542] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.128543] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.128547] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.128637] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.128640] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.128854] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.128897] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.128901] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.129156] pnp 00:04: [dma 0 disabled] [ 0.129196] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.129419] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.129421] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.129422] system 00:05: [io 0x1180-0x119f] has been reserved [ 0.129423] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.129424] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.129426] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.129427] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.129428] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.129431] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.129491] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.129494] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.129716] pnp: PnP ACPI: found 7 devices [ 0.135816] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.135889] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.135891] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.135893] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff] [ 0.135894] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref] [ 0.135897] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.135911] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.135934] pci 0000:00:1c.4: PCI bridge to [bus 03-04] [ 0.135949] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.135951] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.135959] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref] [ 0.135966] pci 0000:00:1c.6: PCI bridge to [bus 06] [ 0.135971] pci 0000:00:1c.6: bridge window [mem 0xfa100000-0xfa1fffff] [ 0.135981] pci 0000:00:1c.7: PCI bridge to [bus 07] [ 0.135996] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.135997] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.135998] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.135999] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff window] [ 0.136008] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff window] [ 0.136009] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.136010] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfa0fffff] [ 0.136011] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref] [ 0.136012] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.136013] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.136014] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.136014] pci_bus 0000:03: resource 7 [mem 0x000c8000-0x000dffff window] [ 0.136015] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xffffffff window] [ 0.136016] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.136017] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.136018] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.136019] pci_bus 0000:04: resource 7 [mem 0x000c8000-0x000dffff window] [ 0.136020] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xffffffff window] [ 0.136021] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.136022] pci_bus 0000:05: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref] [ 0.136023] pci_bus 0000:06: resource 1 [mem 0xfa100000-0xfa1fffff] [ 0.136094] NET: Registered protocol family 2 [ 0.136209] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.136306] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.136415] TCP: Hash tables configured (established 65536 bind 65536) [ 0.136442] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.136462] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.136505] NET: Registered protocol family 1 [ 0.400114] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.400245] PCI: CLS 64 bytes, default 64 [ 0.400276] Unpacking initramfs... [ 0.861611] Freeing initrd memory: 40576K [ 0.861617] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.861618] software IO TLB: mapped [mem 0xbb586000-0xbf586000] (64MB) [ 0.861946] Scanning for low memory corruption every 60 seconds [ 0.862512] Initialise system trusted keyrings [ 0.862519] Key type blacklist registered [ 0.862550] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.863392] zbud: loaded [ 0.863774] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.863882] fuse init (API version 7.26) [ 0.865284] Key type asymmetric registered [ 0.865285] Asymmetric key parser 'x509' registered [ 0.865306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.865340] io scheduler noop registered [ 0.865340] io scheduler deadline registered [ 0.865360] io scheduler cfq registered (default) [ 0.866158] pcieport 0000:00:01.0: Signaling PME with IRQ 24 [ 0.866187] pcieport 0000:00:1c.0: Signaling PME with IRQ 25 [ 0.866209] pcieport 0000:00:1c.5: Signaling PME with IRQ 26 [ 0.866231] pcieport 0000:00:1c.6: Signaling PME with IRQ 27 [ 0.866253] pcieport 0000:00:1c.7: Signaling PME with IRQ 28 [ 0.866303] vesafb: mode is 1600x1200x32, linelength=6400, pages=0 [ 0.866304] vesafb: scrolling: redraw [ 0.866305] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.866313] vesafb: framebuffer at 0xd9000000, mapped to 0x (ptrval), using 7552k, total 7552k [ 0.866388] Console: switching to colour frame buffer device 200x75 [ 0.866410] fb0: VESA VGA frame buffer device [ 0.866420] intel_idle: MWAIT substates: 0x1120 [ 0.866421] intel_idle: v0.4.1 model 0x2A [ 0.866638] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.866708] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.866735] ACPI: Power Button [PWRB] [ 0.866762] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.866782] ACPI: Power Button [PWRF] [ 0.867838] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.888421] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.890291] Linux agpgart interface v0.103 [ 0.891957] loop: module loaded [ 0.892097] libphy: Fixed MDIO Bus: probed [ 0.892098] tun: Universal TUN/TAP device driver, 1.6 [ 0.892125] PPP generic driver version 2.4.2 [ 0.892156] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.892158] ehci-pci: EHCI PCI platform driver [ 0.892236] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.892240] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.892254] ehci-pci 0000:00:1a.0: debug port 2 [ 0.896146] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.896155] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfa207000 [ 0.912040] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.912092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.912093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.912094] usb usb1: Product: EHCI Host Controller [ 0.912095] usb usb1: Manufacturer: Linux 4.15.0-108-generic ehci_hcd [ 0.912096] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.912272] hub 1-0:1.0: USB hub found [ 0.912279] hub 1-0:1.0: 2 ports detected [ 0.912440] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.912443] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.912455] ehci-pci 0000:00:1d.0: debug port 2 [ 0.916349] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.916357] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfa206000 [ 0.932043] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.932088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.932089] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.932090] usb usb2: Product: EHCI Host Controller [ 0.932091] usb usb2: Manufacturer: Linux 4.15.0-108-generic ehci_hcd [ 0.932092] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.932264] hub 2-0:1.0: USB hub found [ 0.932269] hub 2-0:1.0: 2 ports detected [ 0.932359] ehci-platform: EHCI generic platform driver [ 0.932365] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.932368] ohci-pci: OHCI PCI platform driver [ 0.932374] ohci-platform: OHCI generic platform driver [ 0.932378] uhci_hcd: USB Universal Host Controller Interface driver [ 0.932447] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 0.932451] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3 [ 0.932567] xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 0.932745] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.932747] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.932747] usb usb3: Product: xHCI Host Controller [ 0.932748] usb usb3: Manufacturer: Linux 4.15.0-108-generic xhci-hcd [ 0.932749] usb usb3: SerialNumber: 0000:06:00.0 [ 0.932912] hub 3-0:1.0: USB hub found [ 0.932922] hub 3-0:1.0: 2 ports detected [ 0.932997] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 0.933000] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4 [ 0.933002] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed [ 0.933016] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.933030] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.933031] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.933032] usb usb4: Product: xHCI Host Controller [ 0.933033] usb usb4: Manufacturer: Linux 4.15.0-108-generic xhci-hcd [ 0.933034] usb usb4: SerialNumber: 0000:06:00.0 [ 0.933196] hub 4-0:1.0: USB hub found [ 0.933206] hub 4-0:1.0: 2 ports detected [ 0.933306] i8042: PNP: No PS/2 controller found. [ 0.933507] mousedev: PS/2 mouse device common for all mice [ 0.933712] rtc_cmos 00:02: RTC can wake from S4 [ 0.933870] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.933898] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.933903] i2c /dev entries driver [ 0.933935] device-mapper: uevent: version 1.0.3 [ 0.933987] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.933991] intel_pstate: Intel P-state driver initializing [ 0.934440] ledtrig-cpu: registered to indicate activity on CPUs [ 0.934871] NET: Registered protocol family 10 [ 0.938647] Segment Routing with IPv6 [ 0.938660] NET: Registered protocol family 17 [ 0.938723] Key type dns_resolver registered [ 0.939142] mce: Using 9 MCE banks [ 0.939152] RAS: Correctable Errors collector initialized. [ 0.939170] microcode: sig=0x206a7, pf=0x2, revision=0x2f [ 0.939297] microcode: Microcode Update Driver: v2.2. [ 0.939304] sched_clock: Marking stable (939294129, 0)->(922282790, 17011339) [ 0.939525] registered taskstats version 1 [ 0.939532] Loading compiled-in X.509 certificates [ 0.941699] Loaded X.509 cert 'Build time autogenerated kernel key: 8a77f038295f61e2f7a611f87ca2012318dc3558' [ 0.941713] zswap: loaded using pool lzo/zbud [ 0.944646] Key type big_key registered [ 0.944649] Key type trusted registered [ 0.946028] Key type encrypted registered [ 0.946030] AppArmor: AppArmor sha1 policy hashing enabled [ 0.946033] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.946035] ima: Allocated hash algorithm: sha1 [ 0.946046] evm: HMAC attrs: 0x1 [ 0.946292] Magic number: 8:979:574 [ 0.946388] rtc_cmos 00:02: setting system clock to 2020-06-28 08:35:32 UTC (1593333332) [ 0.946424] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.946424] EDD information not available. [ 0.948246] Freeing unused kernel image memory: 2436K [ 0.992042] Write protecting the kernel read-only data: 20480k [ 0.992630] Freeing unused kernel image memory: 2008K [ 0.992931] Freeing unused kernel image memory: 1872K [ 0.999446] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.999447] x86/mm: Checking user space page tables [ 1.005344] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.066000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.066568] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0x (ptrval), 00:25:22:f9:2d:7b, XID 0c900800 IRQ 30 [ 1.066569] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.066673] ahci 0000:00:1f.2: version 3.0 [ 1.076879] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.076881] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.084291] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 1.140441] scsi host0: ahci [ 1.140579] scsi host1: ahci [ 1.140662] scsi host2: ahci [ 1.140753] scsi host3: ahci [ 1.140843] scsi host4: ahci [ 1.140983] scsi host5: ahci [ 1.141027] ata1: SATA max UDMA/133 abar m2048@0xfa205000 port 0xfa205100 irq 31 [ 1.141029] ata2: SATA max UDMA/133 abar m2048@0xfa205000 port 0xfa205180 irq 31 [ 1.141030] ata3: SATA max UDMA/133 abar m2048@0xfa205000 port 0xfa205200 irq 31 [ 1.141032] ata4: SATA max UDMA/133 abar m2048@0xfa205000 port 0xfa205280 irq 31 [ 1.141034] ata5: SATA max UDMA/133 abar m2048@0xfa205000 port 0xfa205300 irq 31 [ 1.141035] ata6: SATA max UDMA/133 abar m2048@0xfa205000 port 0xfa205380 irq 31 [ 1.248004] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.272004] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.404409] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.404410] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.404644] hub 1-1:1.0: USB hub found [ 1.404827] hub 1-1:1.0: 6 ports detected [ 1.428528] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.428529] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.428858] hub 2-1:1.0: USB hub found [ 1.428952] hub 2-1:1.0: 8 ports detected [ 1.454438] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.454465] ata6: SATA link down (SStatus 0 SControl 300) [ 1.454500] ata5: SATA link down (SStatus 0 SControl 300) [ 1.454537] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.454554] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.454578] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.455012] ata1.00: ATA-9: M4-CT128M4SSD2, 0309, max UDMA/100 [ 1.455015] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.455332] ata4.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133 [ 1.455343] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.455530] ata1.00: configured for UDMA/100 [ 1.455571] ata2.00: ATA-11: WDC WDS200T2B0A, X61190WD, max UDMA/133 [ 1.455572] ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.455698] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0309 PQ: 0 ANSI: 5 [ 1.455951] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.455957] sd 0:0:0:0: [sda] Write Protect is off [ 1.455959] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.455968] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.455977] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.456076] ata4.00: configured for UDMA/133 [ 1.456676] sda: sda1 sda2 < sda5 sda6 > [ 1.457121] ata2.00: configured for UDMA/133 [ 1.457135] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.457255] scsi 1:0:0:0: Direct-Access ATA WDC WDS200T2B0A 90WD PQ: 0 ANSI: 5 [ 1.457471] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.457493] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.457500] sd 1:0:0:0: [sdb] Write Protect is off [ 1.457501] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.457518] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.459901] sdb: sdb1 [ 1.460121] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.462509] ata3.00: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.00, max UDMA/133 [ 1.466498] ata3.00: configured for UDMA/133 [ 1.475677] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS38 1.00 PQ: 0 ANSI: 5 [ 1.549227] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.549230] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.549445] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.549550] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 1.549815] scsi 3:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5 [ 1.550051] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.550191] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.550192] sd 3:0:0:0: [sdc] 4096-byte physical blocks [ 1.550215] sd 3:0:0:0: [sdc] Write Protect is off [ 1.550216] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.550310] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.621259] sdc: sdc1 [ 1.622184] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.695993] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 1.705093] random: lvm: uninitialized urandom read (4 bytes read) [ 1.715988] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 1.763745] random: lvm: uninitialized urandom read (2 bytes read) [ 1.806677] usb 1-1.3: New USB device found, idVendor=0dda, idProduct=0001 [ 1.806680] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.806681] usb 1-1.3: Product: 2.0 Card Reader [ 1.806683] usb 1-1.3: Manufacturer: ICSI [ 1.806685] usb 1-1.3: SerialNumber: 0000000000078 [ 1.810924] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 1.811025] scsi host6: usb-storage 1-1.3:1.0 [ 1.811095] usbcore: registered new interface driver usb-storage [ 1.812401] usbcore: registered new interface driver uas [ 1.824637] usb 2-1.1: New USB device found, idVendor=0424, idProduct=2524 [ 1.824638] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.824981] hub 2-1.1:1.0: USB hub found [ 1.825181] hub 2-1.1:1.0: 4 ports detected [ 1.853955] random: lvm: uninitialized urandom read (2 bytes read) [ 1.887980] tsc: Refined TSC clocksource calibration: 3192.751 MHz [ 1.887995] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0589e8251, max_idle_ns: 440795242884 ns [ 1.903994] usb 2-1.5: new high-speed USB device number 4 using ehci-pci [ 2.012338] usb 2-1.5: New USB device found, idVendor=0409, idProduct=005a [ 2.012340] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.012590] hub 2-1.5:1.0: USB hub found [ 2.012677] hub 2-1.5:1.0: 3 ports detected [ 2.111995] usb 2-1.1.1: new full-speed USB device number 5 using ehci-pci [ 2.224447] usb 2-1.1.1: New USB device found, idVendor=10d5, idProduct=1234 [ 2.224450] usb 2-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.225082] hub 2-1.1.1:1.0: USB hub found [ 2.225928] hub 2-1.1.1:1.0: 4 ports detected [ 2.300001] usb 2-1.5.3: new full-speed USB device number 6 using ehci-pci [ 2.440539] random: fast init done [ 2.459643] usb 2-1.5.3: New USB device found, idVendor=056d, idProduct=0002 [ 2.459647] usb 2-1.5.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 2.459649] usb 2-1.5.3: Product: EIZO USB HID Monitor [ 2.459658] usb 2-1.5.3: Manufacturer: EIZO [ 2.464952] hidraw: raw HID events driver (C) Jiri Kosina [ 2.465410] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 2.519992] usb 2-1.1.1.1: new full-speed USB device number 7 using ehci-pci [ 2.761906] usbcore: registered new interface driver usbhid [ 2.761907] usbhid: USB HID core driver [ 2.764551] hid-generic 0003:056D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1d.0-1.5.3/input0 [ 2.814106] scsi 6:0:0:0: Direct-Access ICSI CF Card CF 1.3D PQ: 0 ANSI: 0 CCS [ 2.815914] scsi 6:0:0:1: Direct-Access ICSI SD Card MMC/SD 1.3D PQ: 0 ANSI: 0 CCS [ 2.817844] scsi 6:0:0:2: Direct-Access ICSI MS Card MS 1.3D PQ: 0 ANSI: 0 CCS [ 2.819726] scsi 6:0:0:3: Direct-Access ICSI SM Card SM 1.3D PQ: 0 ANSI: 0 CCS [ 2.819924] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 2.820048] sd 6:0:0:1: Attached scsi generic sg5 type 0 [ 2.820136] sd 6:0:0:2: Attached scsi generic sg6 type 0 [ 2.820219] sd 6:0:0:3: Attached scsi generic sg7 type 0 [ 2.826427] sd 6:0:0:2: [sdf] Attached SCSI removable disk [ 2.828285] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 2.829154] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 2.830896] sd 6:0:0:3: [sdg] Attached SCSI removable disk [ 2.885152] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.893057] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.908028] clocksource: Switched to clocksource tsc [ 2.912180] systemd[1]: Detected architecture x86-64. [ 2.913775] systemd[1]: Set hostname to . [ 3.565186] usb 2-1.1.1.1: New USB device found, idVendor=046d, idProduct=c521 [ 3.565189] usb 2-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.565191] usb 2-1.1.1.1: Product: USB Receiver [ 3.565193] usb 2-1.1.1.1: Manufacturer: Logitech [ 3.865718] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.1/2-1.1.1.1:1.0/0003:046D:C521.0002/input/input2 [ 3.865962] hid-generic 0003:046D:C521.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.1.1/input0 [ 4.035373] systemd[1]: Reached target User and Group Name Lookups. [ 4.035441] systemd[1]: Reached target Remote File Systems. [ 4.035485] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.035620] systemd[1]: Created slice User and Session Slice. [ 4.035631] systemd[1]: Reached target Libvirt guests shutdown. [ 4.035774] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.035883] systemd[1]: Created slice System Slice. [ 4.054859] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 4.075384] lp: driver loaded but no devices found [ 4.079829] ppdev: user-space parallel port driver [ 4.111875] systemd-journald[373]: Received request to flush runtime journal from PID 1 [ 4.152175] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.1/2-1.1.1.1:1.1/0003:046D:C521.0003/input/input3 [ 4.212112] hid-generic 0003:046D:C521.0003: input,hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.1.1/input1 [ 4.291977] usb 2-1.1.1.2: new full-speed USB device number 8 using ehci-pci [ 4.297136] EDAC ie31200: No ECC support [ 4.298790] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247) [ 4.298796] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247) [ 4.298800] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.298802] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247) [ 4.298805] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247) [ 4.298809] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.298810] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247) [ 4.298813] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170831/utaddress-247) [ 4.298817] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.298818] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.299898] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.361060] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 4.361062] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 4.361063] RAPL PMU: hw unit of domain package 2^-16 Joules [ 4.361064] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 4.375601] ipmi message handler version 39.2 [ 4.385237] AVX version of gcm_enc/dec engaged. [ 4.385238] AES CTR mode by8 optimization enabled [ 4.394083] ipmi device interface [ 4.495388] usb 2-1.1.1.2: New USB device found, idVendor=0a81, idProduct=0205 [ 4.495390] usb 2-1.1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.495391] usb 2-1.1.1.2: Product: PS2 to USB Converter [ 4.495392] usb 2-1.1.1.2: Manufacturer: CHESEN [ 4.531749] nvidia: loading out-of-tree module taints kernel. [ 4.531756] nvidia: module license 'NVIDIA' taints kernel. [ 4.531757] Disabling lock debugging due to kernel taint [ 4.538679] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 4.542279] snd_hda_intel 0000:01:00.1: Disabling MSI [ 4.542286] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 4.546704] nvidia-nvlink: Nvlink Core is being initialized, major device number 241 [ 4.547022] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 4.548046] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.138 Thu May 14 01:01:53 PDT 2020 (using threaded interrupts) [ 4.551631] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.2/2-1.1.1.2:1.0/0003:0A81:0205.0004/input/input4 [ 4.586722] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 4.586725] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.586727] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.586728] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.586729] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 4.586731] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.586733] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 4.586734] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 4.586736] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 4.589688] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.138 Thu May 14 04:02:47 PDT 2020 [ 4.595938] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 4.595948] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 4.597689] random: crng init done [ 4.597690] random: 7 urandom warning(s) missed due to ratelimiting [ 4.598402] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 4.603948] intel_rapl: Found RAPL domain package [ 4.603950] intel_rapl: Found RAPL domain core [ 4.603955] intel_rapl: RAPL package 0 domain package locked by BIOS [ 4.608076] hid-generic 0003:0A81:0205.0004: input,hidraw3: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1.1.1.2/input0 [ 4.608103] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 4.608167] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 4.608228] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.608284] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.649065] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.2/2-1.1.1.2:1.1/0003:0A81:0205.0005/input/input10 [ 4.689049] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 240 [ 4.708083] hid-generic 0003:0A81:0205.0005: input,hidraw4: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1.1.1.2/input1 [ 4.865603] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c8000-0x000dffff window] [ 4.865786] caller os_map_kernel_space.part.8+0x10b/0x150 [nvidia] mapping multiple BARs [ 5.182111] Adding 8388604k swap on /dev/mapper/galileo-swap. Priority:-2 extents:1 across:8388604k FS [ 5.445853] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.457006] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 5.486693] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 5.486792] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 5.532497] audit: type=1400 audit(1593333337.081:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1074 comm="apparmor_parser" [ 5.533260] audit: type=1400 audit(1593333337.081:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1070 comm="apparmor_parser" [ 5.533264] audit: type=1400 audit(1593333337.081:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1070 comm="apparmor_parser" [ 5.533267] audit: type=1400 audit(1593333337.081:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1070 comm="apparmor_parser" [ 5.533375] audit: type=1400 audit(1593333337.081:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1072 comm="apparmor_parser" [ 5.533629] audit: type=1400 audit(1593333337.081:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1071 comm="apparmor_parser" [ 5.534278] audit: type=1400 audit(1593333337.081:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1067 comm="apparmor_parser" [ 5.534282] audit: type=1400 audit(1593333337.081:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 5.534285] audit: type=1400 audit(1593333337.081:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 5.534287] audit: type=1400 audit(1593333337.081:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 5.823621] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 5.823699] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 5.823765] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 5.823835] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 5.933450] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 5.948908] openvswitch: Open vSwitch switching datapath [ 6.133294] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 6.285438] r8169 0000:05:00.0 enp5s0: link down [ 6.285441] r8169 0000:05:00.0 enp5s0: link down [ 6.285531] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 6.294752] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.306538] IPv6: ADDRCONF(NETDEV_UP): bridge0: link is not ready [ 7.162378] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 7.263868] Ebtables v2.0 registered [ 7.388841] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c8000-0x000dffff window] [ 7.388960] caller os_map_kernel_space.part.8+0x10b/0x150 [nvidia] mapping multiple BARs [ 7.702397] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. [ 8.507691] virbr0: port 1(virbr0-nic) entered blocking state [ 8.507693] virbr0: port 1(virbr0-nic) entered disabled state [ 8.507733] device virbr0-nic entered promiscuous mode [ 8.884509] r8169 0000:05:00.0 enp5s0: link up [ 8.884516] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [ 8.888515] bridge0: port 1(enp5s0) entered blocking state [ 8.888516] bridge0: port 1(enp5s0) entered disabled state [ 8.888590] device enp5s0 entered promiscuous mode [ 8.888653] bridge0: port 1(enp5s0) entered blocking state [ 8.888654] bridge0: port 1(enp5s0) entered forwarding state [ 9.014822] virbr0: port 1(virbr0-nic) entered blocking state [ 9.014825] virbr0: port 1(virbr0-nic) entered listening state [ 9.044239] virbr0: port 1(virbr0-nic) entered disabled state [ 30.057129] usb 2-1.1.1.1: USB disconnect, device number 7 [ 32.013565] usb 2-1.1.1.2: USB disconnect, device number 8 [ 33.808729] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 33.816907] JFS: nTxBlock = 8192, nTxLock = 65536 [ 33.826194] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 33.841495] QNX4 filesystem 0.2.3 registered. [ 33.895970] raid6: sse2x1 gen() 10171 MB/s [ 33.943964] raid6: sse2x1 xor() 7187 MB/s [ 33.991966] raid6: sse2x2 gen() 12364 MB/s [ 34.039963] raid6: sse2x2 xor() 8396 MB/s [ 34.087967] raid6: sse2x4 gen() 14676 MB/s [ 34.135965] raid6: sse2x4 xor() 9800 MB/s [ 34.135966] raid6: using algorithm sse2x4 gen() 14676 MB/s [ 34.135966] raid6: .... xor() 9800 MB/s, rmw enabled [ 34.135967] raid6: using ssse3x2 recovery algorithm [ 34.137443] xor: automatically using best checksumming function avx [ 34.159091] Btrfs loaded, crc32c=crc32c-intel [ 34.947984] usb 2-1.1.1.1: new full-speed USB device number 9 using ehci-pci [ 35.500167] usb 2-1.1.1.1: New USB device found, idVendor=0a81, idProduct=0205 [ 35.500169] usb 2-1.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 35.500170] usb 2-1.1.1.1: Product: PS2 to USB Converter [ 35.500171] usb 2-1.1.1.1: Manufacturer: CHESEN [ 35.544462] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.1/2-1.1.1.1:1.0/0003:0A81:0205.0006/input/input15 [ 35.604326] hid-generic 0003:0A81:0205.0006: input,hidraw1: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1.1.1.1/input0 [ 35.643089] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.1/2-1.1.1.1:1.1/0003:0A81:0205.0007/input/input16 [ 35.700316] hid-generic 0003:0A81:0205.0007: input,hidraw2: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1.1.1.1/input1 [ 41.223974] usb 2-1.1.1.2: new full-speed USB device number 10 using ehci-pci [ 42.295729] usb 2-1.1.1.2: New USB device found, idVendor=046d, idProduct=c521 [ 42.295731] usb 2-1.1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 42.295732] usb 2-1.1.1.2: Product: USB Receiver [ 42.295733] usb 2-1.1.1.2: Manufacturer: Logitech [ 42.596995] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.2/2-1.1.1.2:1.0/0003:046D:C521.0008/input/input17 [ 42.656286] hid-generic 0003:046D:C521.0008: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.1.2/input0 [ 42.942676] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.2/2-1.1.1.2:1.1/0003:046D:C521.0009/input/input18 [ 43.000302] hid-generic 0003:046D:C521.0009: input,hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.1.2/input1 [ 51.603358] rfkill: input handler disabled [ 55.411987] usb 2-1.6: new high-speed USB device number 11 using ehci-pci [ 55.523882] usb 2-1.6: New USB device found, idVendor=04a9, idProduct=176b [ 55.523885] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 55.523887] usb 2-1.6: Product: MX920 series [ 55.523889] usb 2-1.6: Manufacturer: Canon [ 55.523891] usb 2-1.6: SerialNumber: 127448 [ 55.539641] usblp 2-1.6:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176B [ 55.541893] usblp 2-1.6:1.2: usblp3: USB Bidirectional printer dev 11 if 2 alt 0 proto 2 vid 0x04A9 pid 0x176B [ 55.541932] usbcore: registered new interface driver usblp [ 60.624760] usblp2: removed [ 60.630090] usblp 2-1.6:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176B [ 60.630192] usblp3: removed [ 60.635375] usblp 2-1.6:1.2: usblp3: USB Bidirectional printer dev 11 if 2 alt 0 proto 2 vid 0x04A9 pid 0x176B [ 795.820366] kauditd_printk_skb: 33 callbacks suppressed [ 795.820367] audit: type=1400 audit(1593334125.719:45): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=5937 comm="apparmor_parser" [ 795.980415] audit: type=1400 audit(1593334125.879:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=5940 comm="apparmor_parser" [ 796.140478] audit: type=1400 audit(1593334126.039:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=5943 comm="apparmor_parser" [ 796.296637] audit: type=1400 audit(1593334126.195:48): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=5946 comm="apparmor_parser" [ 796.314057] bridge0: port 2(vnet0) entered blocking state [ 796.314060] bridge0: port 2(vnet0) entered disabled state [ 796.314148] device vnet0 entered promiscuous mode [ 796.314490] bridge0: port 2(vnet0) entered blocking state [ 796.314492] bridge0: port 2(vnet0) entered forwarding state [ 796.481488] audit: type=1400 audit(1593334126.383:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=5976 comm="apparmor_parser" [ 799.165307] bridge0: port 2(vnet0) entered disabled state [ 799.166897] device vnet0 left promiscuous mode [ 799.166900] bridge0: port 2(vnet0) entered disabled state [ 799.588445] audit: type=1400 audit(1593334129.487:50): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=6284 comm="apparmor_parser" [ 803.208071] r8169 0000:05:00.0: invalid large VPD tag 7f at offset 0 [ 827.899006] audit: type=1400 audit(1593334157.799:51): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=6784 comm="apparmor_parser" [ 828.060680] audit: type=1400 audit(1593334157.963:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=6787 comm="apparmor_parser" [ 828.216348] audit: type=1400 audit(1593334158.115:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=6790 comm="apparmor_parser" [ 828.367926] audit: type=1400 audit(1593334158.267:54): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=6793 comm="apparmor_parser" [ 828.373434] bridge0: port 2(vnet0) entered blocking state [ 828.373436] bridge0: port 2(vnet0) entered disabled state [ 828.373505] device vnet0 entered promiscuous mode [ 828.373818] bridge0: port 2(vnet0) entered blocking state [ 828.373820] bridge0: port 2(vnet0) entered forwarding state [ 828.534981] audit: type=1400 audit(1593334158.435:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=6810 comm="apparmor_parser" [ 831.188935] bridge0: port 2(vnet0) entered disabled state [ 831.190509] device vnet0 left promiscuous mode [ 831.190514] bridge0: port 2(vnet0) entered disabled state [ 831.604315] audit: type=1400 audit(1593334161.503:56): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=7134 comm="apparmor_parser" [ 1051.017691] audit: type=1400 audit(1593334380.917:57): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=8139 comm="apparmor_parser" [ 1051.172618] audit: type=1400 audit(1593334381.073:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=8142 comm="apparmor_parser" [ 1051.328224] audit: type=1400 audit(1593334381.229:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=8145 comm="apparmor_parser" [ 1051.484749] audit: type=1400 audit(1593334381.385:60): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=8148 comm="apparmor_parser" [ 1051.490491] bridge0: port 2(vnet0) entered blocking state [ 1051.490495] bridge0: port 2(vnet0) entered disabled state [ 1051.490570] device vnet0 entered promiscuous mode [ 1051.490786] bridge0: port 2(vnet0) entered blocking state [ 1051.490788] bridge0: port 2(vnet0) entered forwarding state [ 1051.654680] audit: type=1400 audit(1593334381.557:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=8166 comm="apparmor_parser" [ 1054.246904] bridge0: port 2(vnet0) entered disabled state [ 1054.248499] device vnet0 left promiscuous mode [ 1054.248504] bridge0: port 2(vnet0) entered disabled state [ 1054.656786] audit: type=1400 audit(1593334384.557:62): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=8487 comm="apparmor_parser" [ 1128.785202] audit: type=1400 audit(1593334458.685:63): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=9018 comm="apparmor_parser" [ 1128.941530] audit: type=1400 audit(1593334458.841:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=9021 comm="apparmor_parser" [ 1129.099198] audit: type=1400 audit(1593334459.001:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=9024 comm="apparmor_parser" [ 1129.260331] audit: type=1400 audit(1593334459.161:66): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=9027 comm="apparmor_parser" [ 1129.266007] bridge0: port 2(vnet0) entered blocking state [ 1129.266011] bridge0: port 2(vnet0) entered disabled state [ 1129.266096] device vnet0 entered promiscuous mode [ 1129.266457] bridge0: port 2(vnet0) entered blocking state [ 1129.266459] bridge0: port 2(vnet0) entered forwarding state [ 1129.435485] audit: type=1400 audit(1593334459.337:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=9046 comm="apparmor_parser" [ 2781.915452] bridge0: port 2(vnet0) entered disabled state [ 2781.917720] device vnet0 left promiscuous mode [ 2781.917724] bridge0: port 2(vnet0) entered disabled state [ 2782.545075] audit: type=1400 audit(1593336112.448:68): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=10085 comm="apparmor_parser" [ 3201.549298] audit: type=1400 audit(1593336531.454:69): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/snapd/desktop/icons/" pid=10164 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 3298.326294] usblp2: removed [ 3477.585410] usblp 2-1.6:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176B [ 3567.685727] usblp2: removed [ 3640.400502] usblp 2-1.6:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176B [ 3783.406181] audit: type=1400 audit(1593337113.313:70): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/snapd/desktop/icons/" pid=10256 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 3786.378779] usblp2: removed [ 3803.695851] usblp 2-1.6:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176B [ 3872.150240] usblp2: removed [ 3945.478762] usblp 2-1.6:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176B [ 5719.210458] audit: type=1400 audit(1593339049.128:71): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/9436/usr/lib/snapd/snap-confine" pid=10434 comm="apparmor_parser" [ 5719.210632] audit: type=1400 audit(1593339049.128:72): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/9436/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=10434 comm="apparmor_parser" [ 5719.484578] audit: type=1400 audit(1593339049.404:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=10436 comm="apparmor_parser" [ 5719.991008] audit: type=1400 audit(1593339049.912:74): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=10440 comm="apparmor_parser" [ 5720.105741] audit: type=1400 audit(1593339050.024:75): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=10438 comm="apparmor_parser" [ 5720.107772] audit: type=1400 audit(1593339050.028:76): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=10441 comm="apparmor_parser" [ 5720.192526] audit: type=1400 audit(1593339050.112:77): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.freac" pid=10437 comm="apparmor_parser" [ 5720.238842] audit: type=1400 audit(1593339050.156:78): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=10439 comm="apparmor_parser" [ 5720.245869] audit: type=1400 audit(1593339050.164:79): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=10443 comm="apparmor_parser" [ 5720.257113] audit: type=1400 audit(1593339050.176:80): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=10447 comm="apparmor_parser" [ 5724.310737] kauditd_printk_skb: 12 callbacks suppressed [ 5724.310738] audit: type=1400 audit(1593339054.228:93): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=10551 comm="apparmor_parser" [ 5724.402532] audit: type=1400 audit(1593339054.320:94): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.freac" pid=10545 comm="apparmor_parser" [ 5724.425071] audit: type=1400 audit(1593339054.344:95): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=10552 comm="apparmor_parser" [ 5724.478339] audit: type=1400 audit(1593339054.396:96): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=10553 comm="apparmor_parser" [ 5724.544600] audit: type=1400 audit(1593339054.464:97): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=10548 comm="apparmor_parser" [ 5724.564417] audit: type=1400 audit(1593339054.484:98): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=10550 comm="apparmor_parser" [ 5724.572474] audit: type=1400 audit(1593339054.492:99): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=10557 comm="apparmor_parser" [ 5724.677492] audit: type=1400 audit(1593339054.596:100): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=10556 comm="apparmor_parser" [ 5732.925594] audit: type=1400 audit(1593339062.844:101): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/9436/usr/lib/snapd/snap-confine" pid=10725 comm="apparmor_parser" [ 5732.925600] audit: type=1400 audit(1593339062.844:102): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/9436/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=10725 comm="apparmor_parser" [ 5733.177354] audit: type=1400 audit(1593339063.096:103): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.freac.freaccmd" pid=10729 comm="apparmor_parser" [ 5733.180176] audit: type=1400 audit(1593339063.100:104): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.freac.freac" pid=10728 comm="apparmor_parser" [ 5733.285815] audit: type=1400 audit(1593339063.204:105): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.freac" pid=10727 comm="apparmor_parser" [ 5733.290318] audit: type=1400 audit(1593339063.208:106): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=10731 comm="apparmor_parser" [ 5733.291242] audit: type=1400 audit(1593339063.212:107): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=10732 comm="apparmor_parser" [ 7429.267843] audit: type=1400 audit(1593340759.176:108): apparmor="DENIED" operation="open" profile="/usr/bin/evince-previewer" name="/var/lib/snapd/desktop/icons/" pid=11279 comm="evince-previewe" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 7431.817836] usblp2: removed [ 7450.268146] usblp 2-1.6:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x04A9 pid 0x176B [ 7561.304673] usb 2-1.6: USB disconnect, device number 11 [ 7561.305001] usblp2: removed [ 7561.305182] usblp3: removed [ 7570.592219] audit: type=1400 audit(1593340900.500:109): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=11406 comm="apparmor_parser" [ 7570.750165] audit: type=1400 audit(1593340900.656:110): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=11409 comm="apparmor_parser" [ 7570.906009] audit: type=1400 audit(1593340900.812:111): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=11412 comm="apparmor_parser" [ 7571.066529] audit: type=1400 audit(1593340900.972:112): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=11415 comm="apparmor_parser" [ 7571.072429] bridge0: port 2(vnet0) entered blocking state [ 7571.072431] bridge0: port 2(vnet0) entered disabled state [ 7571.072492] device vnet0 entered promiscuous mode [ 7571.072770] bridge0: port 2(vnet0) entered blocking state [ 7571.072772] bridge0: port 2(vnet0) entered forwarding state [ 7571.233159] audit: type=1400 audit(1593340901.140:113): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=11432 comm="apparmor_parser" [ 7714.323636] bridge0: port 2(vnet0) entered disabled state [ 7714.326070] device vnet0 left promiscuous mode [ 7714.326077] bridge0: port 2(vnet0) entered disabled state [ 7714.750627] audit: type=1400 audit(1593341044.656:114): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=11852 comm="apparmor_parser" [ 7793.738687] audit: type=1400 audit(1593341123.644:115): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=11978 comm="apparmor_parser" [ 7793.894406] audit: type=1400 audit(1593341123.800:116): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=11981 comm="apparmor_parser" [ 7794.054483] audit: type=1400 audit(1593341123.960:117): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=11984 comm="apparmor_parser" [ 7794.214179] audit: type=1400 audit(1593341124.120:118): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=11987 comm="apparmor_parser" [ 7794.220208] bridge0: port 2(vnet0) entered blocking state [ 7794.220210] bridge0: port 2(vnet0) entered disabled state [ 7794.220260] device vnet0 entered promiscuous mode [ 7794.220508] bridge0: port 2(vnet0) entered blocking state [ 7794.220510] bridge0: port 2(vnet0) entered forwarding state [ 7794.381812] audit: type=1400 audit(1593341124.288:119): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=12005 comm="apparmor_parser" [ 7797.124034] bridge0: port 2(vnet0) entered disabled state [ 7797.125596] device vnet0 left promiscuous mode [ 7797.125602] bridge0: port 2(vnet0) entered disabled state [ 7797.560114] audit: type=1400 audit(1593341127.468:120): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="libvirt-11d5324a-410f-454e-a5ba-d346c1744efa" pid=12293 comm="apparmor_parser"