[ 0.000000] microcode: microcode updated early to revision 0xd6, date = 2019-10-03 [ 0.000000] Linux version 5.4.0-9-generic (buildd@lcy01-amd64-023) (gcc version 9.2.1 20191130 (Ubuntu 9.2.1-21ubuntu1)) #12-Ubuntu SMP Mon Dec 16 22:34:19 UTC 2019 (Ubuntu 5.4.0-9.12-generic 5.4.3) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-9-generic root=UUID=6b4ae5c0-c78c-49a6-a1ba-029192618a7a ro quiet ro kvm.ignore_msrs=1 kvm.report_ignored_msrs=0 kvm.halt_poll_ns=0 kvm.halt_poll_ns_grow=0 i915.enable_gvt=1 i915.fastboot=1 resume=UUID=a82e38a0-8d20-49dd-9cbd-de7216b589fc log_buf_len=16M usbhid.quirks=0x0079:0x0006:0x100000 config_scsi_mq_default=y scsi_mod.use_blk_mq=1 mtrr_gran_size=64M mtrr_chunk_size=64M nbd.nbds_max=2 nbd.max_part=63 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007079afff] usable [ 0.000000] BIOS-e820: [mem 0x000000007079b000-0x000000007079bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007079c000-0x00000000707c5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000707c6000-0x0000000070878fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000070879000-0x0000000071178fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000071179000-0x000000008738dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000008738e000-0x000000008758dfff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000008758e000-0x0000000087d7dfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000087d7e000-0x0000000087f7dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000087f7e000-0x0000000087ffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable [ 0.000000] BIOS-e820: [mem 0x0000000087fff000-0x00000000880fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000088800000-0x000000008b7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000005737fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by INSYDE Corp. [ 0.000000] efi: SMBIOS=0x87601000 ESRT=0x875ffe18 ACPI 2.0=0x87ffd014 PROP=0x6f437568 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO 80UG/Toronto 4A2, BIOS 0XCN45WW 08/09/2018 [ 0.000000] tsc: Detected 2300.000 MHz processor [ 0.000878] tsc: Detected 2299.968 MHz TSC [ 0.000878] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000880] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000889] last_pfn = 0x573800 max_arch_pfn = 0x400000000 [ 0.000892] MTRR default type: uncachable [ 0.000893] MTRR fixed ranges enabled: [ 0.000895] 00000-9FFFF write-back [ 0.000895] A0000-BFFFF uncachable [ 0.000896] C0000-FFFFF write-protect [ 0.000897] MTRR variable ranges enabled: [ 0.000899] 0 base 0000000000 mask 7800000000 write-back [ 0.000900] 1 base 0087FFF000 mask 7FFFFFF000 uncachable [ 0.000901] 2 base 0088000000 mask 7FF8000000 uncachable [ 0.000902] 3 base 0090000000 mask 7FF0000000 uncachable [ 0.000903] 4 base 00A0000000 mask 7FE0000000 uncachable [ 0.000903] 5 base 00C0000000 mask 7FC0000000 uncachable [ 0.000904] 6 disabled [ 0.000904] 7 disabled [ 0.000905] 8 disabled [ 0.000905] 9 disabled [ 0.001250] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001391] total RAM covered: 30847M [ 0.001394] gran_size: 64M chunk_size: 64M num_reg: 5 lose cover RAM: 65532K [ 0.001693] e820: update [mem 0x84000000-0xffffffff] usable ==> reserved [ 0.001695] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 51MB of RAM. [ 0.001695] update e820 for mtrr [ 0.001702] modified physical RAM map: [ 0.001703] modified: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.001704] modified: [mem 0x0000000000001000-0x0000000000057fff] usable [ 0.001705] modified: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.001706] modified: [mem 0x0000000000059000-0x0000000000085fff] usable [ 0.001706] modified: [mem 0x0000000000086000-0x00000000000fffff] reserved [ 0.001707] modified: [mem 0x0000000000100000-0x000000007079afff] usable [ 0.001708] modified: [mem 0x000000007079b000-0x000000007079bfff] ACPI NVS [ 0.001709] modified: [mem 0x000000007079c000-0x00000000707c5fff] reserved [ 0.001710] modified: [mem 0x00000000707c6000-0x0000000070878fff] usable [ 0.001711] modified: [mem 0x0000000070879000-0x0000000071178fff] reserved [ 0.001712] modified: [mem 0x0000000071179000-0x0000000083ffffff] usable [ 0.001712] modified: [mem 0x0000000084000000-0x000000008738dfff] reserved [ 0.001713] modified: [mem 0x000000008738e000-0x000000008758dfff] type 20 [ 0.001714] modified: [mem 0x000000008758e000-0x0000000087d7dfff] reserved [ 0.001715] modified: [mem 0x0000000087d7e000-0x0000000087f7dfff] ACPI NVS [ 0.001716] modified: [mem 0x0000000087f7e000-0x0000000087ffdfff] ACPI data [ 0.001717] modified: [mem 0x0000000087ffe000-0x00000000880fffff] reserved [ 0.001718] modified: [mem 0x0000000088800000-0x000000008b7fffff] reserved [ 0.001718] modified: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.001719] modified: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.001720] modified: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.001721] modified: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.001722] modified: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.001722] modified: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.001723] modified: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.001724] modified: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.001725] modified: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved [ 0.001726] modified: [mem 0x0000000100000000-0x00000005737fffff] usable [ 0.001727] last_pfn = 0x573800 max_arch_pfn = 0x400000000 [ 0.001736] last_pfn = 0x84000 max_arch_pfn = 0x400000000 [ 0.011142] esrt: Reserving ESRT space from 0x00000000875ffe18 to 0x00000000875ffe78. [ 0.011151] check: Scanning 1 areas for low memory corruption [ 0.011156] Using GB pages for direct mapping [ 0.011158] BRK [0x432401000, 0x432401fff] PGTABLE [ 0.011160] BRK [0x432402000, 0x432402fff] PGTABLE [ 0.011161] BRK [0x432403000, 0x432403fff] PGTABLE [ 0.011219] BRK [0x432404000, 0x432404fff] PGTABLE [ 0.011220] BRK [0x432405000, 0x432405fff] PGTABLE [ 0.011438] BRK [0x432406000, 0x432406fff] PGTABLE [ 0.011485] BRK [0x432407000, 0x432407fff] PGTABLE [ 0.011538] BRK [0x432408000, 0x432408fff] PGTABLE [ 0.011620] BRK [0x432409000, 0x432409fff] PGTABLE [ 0.011661] BRK [0x43240a000, 0x43240afff] PGTABLE [ 0.012627] printk: log_buf_len: 16777216 bytes [ 0.012629] printk: early log buf free: 253220(96%) [ 0.012630] secureboot: Secure boot could not be determined (mode 0) [ 0.012631] RAMDISK: [mem 0x31303000-0x34978fff] [ 0.012639] ACPI: Early table checksum verification disabled [ 0.012644] ACPI: RSDP 0x0000000087FFD014 000024 (v02 LENOVO) [ 0.012650] ACPI: XSDT 0x0000000087FC9188 0000F4 (v01 LENOVO CB-01 00000001 01000013) [ 0.012681] ACPI: FACP 0x0000000087FEB000 0000F4 (v05 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012734] ACPI: DSDT 0x0000000087FCE000 01833A (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012738] ACPI: FACS 0x0000000087F4E000 000040 [ 0.012742] ACPI: TCPA 0x0000000087FFC000 000032 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012746] ACPI: UEFI 0x0000000087FFB000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012751] ACPI: UEFI 0x0000000087FFA000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012755] ACPI: SSDT 0x0000000087FF9000 0004B7 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012759] ACPI: SSDT 0x0000000087FF8000 00004B (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012763] ACPI: TPM2 0x0000000087FF7000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012767] ACPI: MSDM 0x0000000087FF6000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012771] ACPI: SSDT 0x0000000087FF2000 0030D3 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012776] ACPI: DBGP 0x0000000087FF1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012780] ACPI: DBG2 0x0000000087FF0000 000054 (v00 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012784] ACPI: ASF! 0x0000000087FEF000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012789] ACPI: ASPT 0x0000000087FEE000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012793] ACPI: BOOT 0x0000000087FED000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012798] ACPI: DBGP 0x0000000087FEC000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012802] ACPI: HPET 0x0000000087FEA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012806] ACPI: LPIT 0x0000000087FE9000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012810] ACPI: APIC 0x0000000087FE8000 0000BC (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012814] ACPI: MCFG 0x0000000087FE7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012818] ACPI: SSDT 0x0000000087FCD000 0002D4 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012823] ACPI: SSDT 0x0000000087FCA000 002BAE (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012827] ACPI: SSDT 0x0000000087FC8000 000B49 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012831] ACPI: SSDT 0x0000000087FC7000 000E73 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012836] ACPI: DMAR 0x0000000087FC6000 0000A8 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012840] ACPI: FPDT 0x0000000087FC5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012844] ACPI: BGRT 0x0000000087FC4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.012857] ACPI: Local APIC address 0xfee00000 [ 0.013048] No NUMA configuration found [ 0.013049] Faking a node at [mem 0x0000000000000000-0x00000005737fffff] [ 0.013061] NODE_DATA(0) allocated [mem 0x5727d5000-0x5727fffff] [ 0.013344] Zone ranges: [ 0.013345] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013346] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.013347] Normal [mem 0x0000000100000000-0x00000005737fffff] [ 0.013348] Device empty [ 0.013349] Movable zone start for each node [ 0.013352] Early memory node ranges [ 0.013353] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.013354] node 0: [mem 0x0000000000059000-0x0000000000085fff] [ 0.013355] node 0: [mem 0x0000000000100000-0x000000007079afff] [ 0.013356] node 0: [mem 0x00000000707c6000-0x0000000070878fff] [ 0.013357] node 0: [mem 0x0000000071179000-0x0000000083ffffff] [ 0.013357] node 0: [mem 0x0000000100000000-0x00000005737fffff] [ 0.013537] Zeroed struct page in unavailable ranges: 18855 pages [ 0.013539] Initmem setup node 0 [mem 0x0000000000001000-0x00000005737fffff] [ 0.013540] On node 0 totalpages: 5205593 [ 0.013542] DMA zone: 64 pages used for memmap [ 0.013542] DMA zone: 22 pages reserved [ 0.013543] DMA zone: 3972 pages, LIFO batch:0 [ 0.013589] DMA32 zone: 8348 pages used for memmap [ 0.013590] DMA32 zone: 534229 pages, LIFO batch:63 [ 0.021799] Normal zone: 72928 pages used for memmap [ 0.021800] Normal zone: 4667392 pages, LIFO batch:63 [ 0.072517] Reserving Intel graphics memory at [mem 0x89800000-0x8b7fffff] [ 0.072666] ACPI: PM-Timer IO Port: 0x1808 [ 0.072668] ACPI: Local APIC address 0xfee00000 [ 0.072692] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.072694] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.072695] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.072696] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.072698] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.072699] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.072700] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.072702] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.072731] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.072737] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.072740] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.072743] ACPI: IRQ0 used by override. [ 0.072744] ACPI: IRQ9 used by override. [ 0.072750] Using ACPI (MADT) for SMP configuration information [ 0.072752] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.072762] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.072789] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.072790] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.072792] PM: Registered nosave memory: [mem 0x00086000-0x000fffff] [ 0.072794] PM: Registered nosave memory: [mem 0x7079b000-0x7079bfff] [ 0.072795] PM: Registered nosave memory: [mem 0x7079c000-0x707c5fff] [ 0.072796] PM: Registered nosave memory: [mem 0x70879000-0x71178fff] [ 0.072798] PM: Registered nosave memory: [mem 0x84000000-0x8738dfff] [ 0.072799] PM: Registered nosave memory: [mem 0x8738e000-0x8758dfff] [ 0.072799] PM: Registered nosave memory: [mem 0x8758e000-0x87d7dfff] [ 0.072800] PM: Registered nosave memory: [mem 0x87d7e000-0x87f7dfff] [ 0.072800] PM: Registered nosave memory: [mem 0x87f7e000-0x87ffdfff] [ 0.072801] PM: Registered nosave memory: [mem 0x87ffe000-0x880fffff] [ 0.072801] PM: Registered nosave memory: [mem 0x88100000-0x887fffff] [ 0.072802] PM: Registered nosave memory: [mem 0x88800000-0x8b7fffff] [ 0.072803] PM: Registered nosave memory: [mem 0x8b800000-0xdfffffff] [ 0.072803] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.072804] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff] [ 0.072804] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] [ 0.072805] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff] [ 0.072805] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.072806] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.072806] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.072807] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.072807] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.072808] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.072809] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.072809] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] [ 0.072810] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff] [ 0.072810] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff] [ 0.072811] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.072811] PM: Registered nosave memory: [mem 0xfee01000-0xffa0ffff] [ 0.072812] PM: Registered nosave memory: [mem 0xffa10000-0xffffffff] [ 0.072813] [mem 0x8b800000-0xdfffffff] available for PCI devices [ 0.072814] Booting paravirtualized kernel on bare hardware [ 0.072817] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.072825] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.072974] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.072981] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.072982] pcpu-alloc: [0] 0 1 2 3 [ 0.073012] Built 1 zonelists, mobility grouping on. Total pages: 5124231 [ 0.073012] Policy zone: Normal [ 0.073014] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-9-generic root=UUID=6b4ae5c0-c78c-49a6-a1ba-029192618a7a ro quiet ro kvm.ignore_msrs=1 kvm.report_ignored_msrs=0 kvm.halt_poll_ns=0 kvm.halt_poll_ns_grow=0 i915.enable_gvt=1 i915.fastboot=1 resume=UUID=a82e38a0-8d20-49dd-9cbd-de7216b589fc log_buf_len=16M usbhid.quirks=0x0079:0x0006:0x100000 config_scsi_mq_default=y scsi_mod.use_blk_mq=1 mtrr_gran_size=64M mtrr_chunk_size=64M nbd.nbds_max=2 nbd.max_part=63 [ 0.074978] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.075795] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.075846] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.079146] Calgary: detecting Calgary via BIOS EBDA area [ 0.079148] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.122060] Memory: 20214480K/20822372K available (14339K kernel code, 2391K rwdata, 4908K rodata, 2676K init, 5040K bss, 607892K reserved, 0K cma-reserved) [ 0.122184] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.122194] Kernel/User page tables isolation: enabled [ 0.122207] ftrace: allocating 43701 entries in 171 pages [ 0.141176] rcu: Hierarchical RCU implementation. [ 0.141177] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.141179] Tasks RCU enabled. [ 0.141179] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.141180] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.144177] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.144513] random: crng done (trusting CPU's manufacturer) [ 0.144540] Console: colour dummy device 80x25 [ 0.144545] printk: console [tty0] enabled [ 0.144559] ACPI: Core revision 20190816 [ 0.157700] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.157766] APIC: Switch to symmetric I/O mode setup [ 0.157768] DMAR: Host address width 39 [ 0.157770] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.157776] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.157777] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.157782] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.157784] DMAR: RMRR base: 0x00000087c7a000 end: 0x00000087c99fff [ 0.157785] DMAR: RMRR base: 0x00000089000000 end: 0x0000008b7fffff [ 0.157787] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.157788] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.157789] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.157789] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.159298] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.159299] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.163329] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.181782] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212717146a7, max_idle_ns: 440795291431 ns [ 0.181786] Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.93 BogoMIPS (lpj=9199872) [ 0.181788] pid_max: default: 32768 minimum: 301 [ 0.213828] LSM: Security Framework initializing [ 0.213841] Yama: becoming mindful. [ 0.213868] AppArmor: AppArmor initialized [ 0.213952] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.213997] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.214012] *** VALIDATE tmpfs *** [ 0.214158] *** VALIDATE proc *** [ 0.214207] *** VALIDATE cgroup1 *** [ 0.214208] *** VALIDATE cgroup2 *** [ 0.214259] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.214276] process: using mwait in idle threads [ 0.214279] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.214280] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.214284] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.214286] Spectre V2 : Mitigation: Full generic retpoline [ 0.214286] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.214287] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.214289] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.214289] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.214291] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.214294] TAA: Mitigation: Clear CPU buffers [ 0.214295] MDS: Mitigation: Clear CPU buffers [ 0.214573] Freeing SMP alternatives memory: 36K [ 0.217860] TSC deadline timer enabled [ 0.217864] smpboot: CPU0: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.217966] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.217972] ... version: 4 [ 0.217972] ... bit width: 48 [ 0.217973] ... generic registers: 4 [ 0.217973] ... value mask: 0000ffffffffffff [ 0.217974] ... max period: 00007fffffffffff [ 0.217974] ... fixed-purpose events: 3 [ 0.217975] ... event mask: 000000070000000f [ 0.218014] rcu: Hierarchical SRCU implementation. [ 0.218925] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.218979] smp: Bringing up secondary CPUs ... [ 0.219067] x86: Booting SMP configuration: [ 0.219068] .... node #0, CPUs: #1 #2 [ 0.222275] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.222275] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.222275] #3 [ 0.222305] smp: Brought up 1 node, 4 CPUs [ 0.222305] smpboot: Max logical packages: 1 [ 0.222305] smpboot: Total of 4 processors activated (18399.74 BogoMIPS) [ 0.223891] devtmpfs: initialized [ 0.223891] x86/mm: Memory block size: 128MB [ 0.227436] PM: Registering ACPI NVS region [mem 0x7079b000-0x7079bfff] (4096 bytes) [ 0.227436] PM: Registering ACPI NVS region [mem 0x87d7e000-0x87f7dfff] (2097152 bytes) [ 0.227436] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.227436] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.227436] pinctrl core: initialized pinctrl subsystem [ 0.227436] PM: RTC time: 22:59:24, date: 2020-01-13 [ 0.227436] NET: Registered protocol family 16 [ 0.227436] audit: initializing netlink subsys (disabled) [ 0.227436] audit: type=2000 audit(1578956364.068:1): state=initialized audit_enabled=0 res=1 [ 0.227436] EISA bus registered [ 0.227436] cpuidle: using governor ladder [ 0.227436] cpuidle: using governor menu [ 0.227436] Simple Boot Flag at 0x44 set to 0x1 [ 0.227436] ACPI: bus type PCI registered [ 0.227436] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.227436] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.227436] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.227436] PCI: Using configuration type 1 for base access [ 0.230601] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.230601] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.233880] ACPI: Added _OSI(Module Device) [ 0.233881] ACPI: Added _OSI(Processor Device) [ 0.233882] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.233882] ACPI: Added _OSI(Processor Aggregator Device) [ 0.233884] ACPI: Added _OSI(Linux-Dell-Video) [ 0.233884] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.233885] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.274097] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.277145] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.281905] ACPI: Dynamic OEM Table Load: [ 0.281920] ACPI: SSDT 0xFFFF9CAD19C33000 0005FD (v02 PmRef Cpu0Ist 00003000 INTL 20121220) [ 0.283646] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.285710] ACPI: Dynamic OEM Table Load: [ 0.285718] ACPI: SSDT 0xFFFF9CAD19CB7000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121220) [ 0.287336] ACPI: Dynamic OEM Table Load: [ 0.287342] ACPI: SSDT 0xFFFF9CAD1A05D3C0 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20121220) [ 0.288790] ACPI: Dynamic OEM Table Load: [ 0.288796] ACPI: SSDT 0xFFFF9CAD1A077E00 000130 (v02 PmRef HwpLvt 00003000 INTL 20121220) [ 0.291249] ACPI: Dynamic OEM Table Load: [ 0.291258] ACPI: SSDT 0xFFFF9CAD19C31800 0005AA (v02 PmRef ApIst 00003000 INTL 20121220) [ 0.293270] ACPI: Dynamic OEM Table Load: [ 0.293277] ACPI: SSDT 0xFFFF9CAD1A077C00 000119 (v02 PmRef ApHwp 00003000 INTL 20121220) [ 0.294631] ACPI: Dynamic OEM Table Load: [ 0.294631] ACPI: SSDT 0xFFFF9CAD1A077400 000119 (v02 PmRef ApCst 00003000 INTL 20121220) [ 0.299202] ACPI: EC: EC started [ 0.299202] ACPI: EC: interrupt blocked [ 0.301558] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.301560] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x4f, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.301561] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.301562] ACPI: Interpreter enabled [ 0.301616] ACPI: (supports S0 S3 S4 S5) [ 0.301617] ACPI: Using IOAPIC for interrupt routing [ 0.301668] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.302577] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.329250] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.329257] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.333443] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.336009] PCI host bridge to bus 0000:00 [ 0.336011] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.336013] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.336014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.336015] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.336016] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.336017] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.336018] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.336019] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.336020] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.336021] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.336022] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.336023] pci_bus 0000:00: root bus resource [mem 0x8b800000-0xdfffffff window] [ 0.336024] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.336025] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.336035] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.337021] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.337033] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] [ 0.337039] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.337043] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.337058] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.338113] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.338138] pci 0000:00:14.0: reg 0x10: [mem 0xa1300000-0xa130ffff 64bit] [ 0.338212] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.339236] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.339259] pci 0000:00:14.2: reg 0x10: [mem 0xa132a000-0xa132afff 64bit] [ 0.340288] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.340317] pci 0000:00:16.0: reg 0x10: [mem 0xa132b000-0xa132bfff 64bit] [ 0.340396] pci 0000:00:16.0: PME# supported from D3hot [ 0.341420] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.341440] pci 0000:00:17.0: reg 0x10: [mem 0xa1328000-0xa1329fff] [ 0.341448] pci 0000:00:17.0: reg 0x14: [mem 0xa132e000-0xa132e0ff] [ 0.341457] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] [ 0.341465] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] [ 0.341473] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] [ 0.341481] pci 0000:00:17.0: reg 0x24: [mem 0xa132c000-0xa132c7ff] [ 0.341527] pci 0000:00:17.0: PME# supported from D3hot [ 0.342557] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 [ 0.342645] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.343739] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.343828] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.344919] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.346033] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.346051] pci 0000:00:1f.2: reg 0x10: [mem 0xa1324000-0xa1327fff] [ 0.347113] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.347144] pci 0000:00:1f.3: reg 0x10: [mem 0xa1320000-0xa1323fff 64bit] [ 0.347180] pci 0000:00:1f.3: reg 0x20: [mem 0xa1310000-0xa131ffff 64bit] [ 0.347234] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.348326] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.348386] pci 0000:00:1f.4: reg 0x10: [mem 0xa132d000-0xa132d0ff 64bit] [ 0.348455] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f] [ 0.349581] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.349613] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.349642] pci 0000:01:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit] [ 0.349659] pci 0000:01:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit] [ 0.349771] pci 0000:01:00.0: supports D1 D2 [ 0.349772] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.349930] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.349933] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.349936] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff] [ 0.350149] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000 [ 0.350217] pci 0000:02:00.0: reg 0x10: [mem 0xa1000000-0xa11fffff 64bit] [ 0.350478] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.350850] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.350855] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa11fffff] [ 0.352740] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.352835] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.352927] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.353019] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.353111] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.353201] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.353296] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.353388] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.353796] platform MSFT0101:00: failed to claim resource 1: [mem 0xfed40000-0xfed40fff] [ 0.353805] fbcon: Taking over console [ 0.353808] acpi MSFT0101:00: platform device creation failed: -16 [ 0.353985] ACPI: EC: interrupt unblocked [ 0.353990] ACPI: EC: event unblocked [ 0.354003] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x4f, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.354004] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.354085] iommu: Default domain type: Translated [ 0.354085] SCSI subsystem initialized [ 0.354085] libata version 3.00 loaded. [ 0.354085] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.354085] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.354085] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.354085] vgaarb: loaded [ 0.354085] ACPI: bus type USB registered [ 0.354085] usbcore: registered new interface driver usbfs [ 0.354085] usbcore: registered new interface driver hub [ 0.354085] usbcore: registered new device driver usb [ 0.354085] pps_core: LinuxPPS API ver. 1 registered [ 0.354085] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.354085] PTP clock support registered [ 0.354085] EDAC MC: Ver: 3.0.0 [ 0.354085] Registered efivars operations [ 0.354085] PCI: Using ACPI for IRQ routing [ 0.382726] PCI: pci_cache_line_size set to 64 bytes [ 0.382907] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.382908] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] [ 0.382909] e820: reserve RAM buffer [mem 0x7079b000-0x73ffffff] [ 0.382910] e820: reserve RAM buffer [mem 0x70879000-0x73ffffff] [ 0.382910] e820: reserve RAM buffer [mem 0x573800000-0x573ffffff] [ 0.383007] NetLabel: Initializing [ 0.383008] NetLabel: domain hash size = 128 [ 0.383008] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.383024] NetLabel: unlabeled traffic allowed by default [ 0.383039] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.383039] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.385785] clocksource: Switched to clocksource tsc-early [ 0.397799] *** VALIDATE bpf *** [ 0.397877] VFS: Disk quotas dquot_6.6.0 [ 0.397891] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.397914] *** VALIDATE ramfs *** [ 0.397917] *** VALIDATE hugetlbfs *** [ 0.397995] AppArmor: AppArmor Filesystem Enabled [ 0.398019] pnp: PnP ACPI init [ 0.398177] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.398179] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.398180] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.398181] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.398183] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.398184] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.398185] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.398190] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.398663] system 00:01: [io 0x2000-0x20fe] has been reserved [ 0.398666] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.399380] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.399382] system 00:02: [io 0xffff] has been reserved [ 0.399383] system 00:02: [io 0xffff] has been reserved [ 0.399384] system 00:02: [io 0xffff] has been reserved [ 0.399385] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.399386] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.399390] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.399519] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.399564] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.399567] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.399595] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.399621] pnp 00:06: Plug and Play ACPI device, IDs SYN2b58 PNP0f13 SYN0002 SYN2b00 (active) [ 0.401481] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.401482] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.401483] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.401485] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.401486] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.401489] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.402300] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.402301] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.402302] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.402303] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.402305] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.402306] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.402307] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.402309] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved [ 0.402310] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.402311] system 00:08: [mem 0x8b800000-0x8b81ffff] has been reserved [ 0.402315] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.402742] pnp: PnP ACPI: found 9 devices [ 0.403981] thermal_sys: Registered thermal governor 'fair_share' [ 0.403982] thermal_sys: Registered thermal governor 'bang_bang' [ 0.403982] thermal_sys: Registered thermal governor 'step_wise' [ 0.403983] thermal_sys: Registered thermal governor 'user_space' [ 0.403984] thermal_sys: Registered thermal governor 'power_allocator' [ 0.408478] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.408513] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.408515] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.408519] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff] [ 0.408526] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.408529] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa11fffff] [ 0.408536] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.408538] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.408539] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.408540] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.408541] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.408542] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.408543] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.408544] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.408545] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.408546] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.408547] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.408548] pci_bus 0000:00: resource 15 [mem 0x8b800000-0xdfffffff window] [ 0.408549] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window] [ 0.408551] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.408552] pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff] [ 0.408553] pci_bus 0000:02: resource 1 [mem 0xa1000000-0xa11fffff] [ 0.408725] NET: Registered protocol family 2 [ 0.408891] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.409058] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.409391] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.409472] TCP: Hash tables configured (established 262144 bind 65536) [ 0.409536] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.409625] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.409723] NET: Registered protocol family 1 [ 0.409728] NET: Registered protocol family 44 [ 0.409740] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.411780] PCI: CLS 64 bytes, default 64 [ 0.411818] Trying to unpack rootfs image as initramfs... [ 0.553887] Freeing initrd memory: 55768K [ 0.577859] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.577867] software IO TLB: mapped [mem 0x80000000-0x84000000] (64MB) [ 0.578180] check: Scanning for low memory corruption every 60 seconds [ 0.580135] Initialise system trusted keyrings [ 0.580142] Key type blacklist registered [ 0.580169] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.581498] zbud: loaded [ 0.581876] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.582025] fuse: init (API version 7.31) [ 0.582041] *** VALIDATE fuse *** [ 0.582043] *** VALIDATE fuse *** [ 0.582128] Platform Keyring initialized [ 0.587241] Key type asymmetric registered [ 0.587242] Asymmetric key parser 'x509' registered [ 0.587252] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.587298] io scheduler mq-deadline registered [ 0.587649] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.587882] pcieport 0000:00:1c.5: PME: Signaling with IRQ 123 [ 0.587950] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.588006] efifb: probing for efifb [ 0.588026] efifb: showing boot graphics [ 0.588850] efifb: framebuffer at 0x90000000, using 4160k, total 4160k [ 0.588851] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.588851] efifb: scrolling: redraw [ 0.588852] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.588946] Console: switching to colour frame buffer device 170x48 [ 0.591089] fb0: EFI VGA frame buffer device [ 0.591097] intel_idle: MWAIT substates: 0x11142120 [ 0.591097] intel_idle: v0.4.1 model 0x4E [ 0.591329] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.592263] ACPI: AC Adapter [ADP0] (on-line) [ 0.592335] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.592352] ACPI: Lid Switch [LID0] [ 0.592382] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.592399] ACPI: Power Button [PWRB] [ 0.592430] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.592461] ACPI: Power Button [PWRF] [ 0.593783] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.596203] Linux agpgart interface v0.103 [ 0.670249] loop: module loaded [ 0.670445] libphy: Fixed MDIO Bus: probed [ 0.670446] tun: Universal TUN/TAP device driver, 1.6 [ 0.670474] PPP generic driver version 2.4.2 [ 0.670513] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.670515] ehci-pci: EHCI PCI platform driver [ 0.670525] ehci-platform: EHCI generic platform driver [ 0.670534] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.670535] ohci-pci: OHCI PCI platform driver [ 0.670542] ohci-platform: OHCI generic platform driver [ 0.670547] uhci_hcd: USB Universal Host Controller Interface driver [ 0.672533] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.672538] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.673607] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 0.673615] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.673805] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.673806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.673808] usb usb1: Product: xHCI Host Controller [ 0.673809] usb usb1: Manufacturer: Linux 5.4.0-9-generic xhci-hcd [ 0.673810] usb usb1: SerialNumber: 0000:00:14.0 [ 0.674476] hub 1-0:1.0: USB hub found [ 0.674493] hub 1-0:1.0: 12 ports detected [ 0.675048] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.675051] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.675053] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.675085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.675086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.675087] usb usb2: Product: xHCI Host Controller [ 0.675088] usb usb2: Manufacturer: Linux 5.4.0-9-generic xhci-hcd [ 0.675089] usb usb2: SerialNumber: 0000:00:14.0 [ 0.675165] hub 2-0:1.0: USB hub found [ 0.675175] hub 2-0:1.0: 6 ports detected [ 0.675733] usb: port power management may be unreliable [ 0.676011] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.692024] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.692028] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.692348] mousedev: PS/2 mouse device common for all mice [ 0.692764] rtc_cmos 00:03: RTC can wake from S4 [ 0.693259] rtc_cmos 00:03: registered as rtc0 [ 0.693275] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.693289] i2c /dev entries driver [ 0.693328] device-mapper: uevent: version 1.0.3 [ 0.693389] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 0.693409] platform eisa.0: Probing EISA bus 0 [ 0.693410] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.693412] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.693413] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.693414] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.693415] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.693415] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.693416] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.693417] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.693418] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.693419] platform eisa.0: EISA: Detected 0 cards [ 0.693435] intel_pstate: Intel P-state driver initializing [ 0.693685] intel_pstate: HWP enabled [ 0.693712] ledtrig-cpu: registered to indicate activity on CPUs [ 0.693716] EFI Variables Facility v0.08 2004-May-17 [ 0.703202] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.754305] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.924809] intel_pmc_core intel_pmc_core.0: initialized [ 0.924843] drop_monitor: Initializing network drop monitor service [ 0.925006] NET: Registered protocol family 10 [ 0.934683] Segment Routing with IPv6 [ 0.934709] NET: Registered protocol family 17 [ 0.934744] Key type dns_resolver registered [ 0.935227] RAS: Correctable Errors collector initialized. [ 0.935258] microcode: sig=0x406e3, pf=0x80, revision=0xd6 [ 0.935384] microcode: Microcode Update Driver: v2.2. [ 0.935387] IPI shorthand broadcast: enabled [ 0.935396] sched_clock: Marking stable (922063518, 13316782)->(959107536, -23727236) [ 0.935461] registered taskstats version 1 [ 0.935468] Loading compiled-in X.509 certificates [ 0.937589] Loaded X.509 cert 'Build time autogenerated kernel key: 48d8ce95bd4251063c88ddda9a0daab412ac02af' [ 0.937616] zswap: loaded using pool lzo/zbud [ 0.937682] Key type ._fscrypt registered [ 0.937683] Key type .fscrypt registered [ 0.945965] Key type big_key registered [ 0.945971] Key type trusted registered [ 0.950106] Key type encrypted registered [ 0.950111] AppArmor: AppArmor sha1 policy hashing enabled [ 0.958559] integrity: Loading X.509 certificate: UEFI:db [ 0.958595] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.958596] integrity: Loading X.509 certificate: UEFI:db [ 0.958620] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.958621] integrity: Loading X.509 certificate: UEFI:db [ 0.958632] integrity: Loaded X.509 cert 'Mocca: eee4ae78c24bf4a5488b6b77c611edde' [ 0.958632] integrity: Loading X.509 certificate: UEFI:db [ 0.958644] integrity: Loaded X.509 cert '0RB71-80: 9a80e46022d53f8b4e227a3550427c3a' [ 0.958644] integrity: Loading X.509 certificate: UEFI:db [ 0.960489] integrity: Loaded X.509 cert 'LCFC: 16e5000ec0e008a3434536c06d55a3b6' [ 0.960490] integrity: Loading X.509 certificate: UEFI:db [ 0.960506] integrity: Loaded X.509 cert '0XCGCZ411511: 1964db88f8d3688e4b4979178539526e' [ 0.972156] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.972408] integrity: Loaded X.509 cert 'home:regataos OBS Project: 9d4e47d44bc2a44d37fea3603de18a2fe004e12f' [ 0.972408] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.972627] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.975115] ima: Allocated hash algorithm: sha1 [ 1.014381] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.162730] usb 1-2: New USB device found, idVendor=214b, idProduct=7000, bcdDevice= 1.00 [ 1.162732] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.162733] usb 1-2: Product: USB2.0 HUB [ 1.163703] hub 1-2:1.0: USB hub found [ 1.163758] hub 1-2:1.0: 4 ports detected [ 1.165902] ima: No architecture policies found [ 1.165949] evm: Initialising EVM extended attributes: [ 1.165950] evm: security.selinux [ 1.165950] evm: security.SMACK64 [ 1.165951] evm: security.SMACK64EXEC [ 1.165951] evm: security.SMACK64TRANSMUTE [ 1.165951] evm: security.SMACK64MMAP [ 1.165952] evm: security.apparmor [ 1.165952] evm: security.ima [ 1.165953] evm: security.capability [ 1.165954] evm: HMAC attrs: 0x1 [ 1.166973] PM: Magic number: 4:722:1007 [ 1.167029] memory memory46: hash matches [ 1.167136] rtc_cmos 00:03: setting system clock to 2020-01-13T22:59:25 UTC (1578956365) [ 1.168332] Freeing unused decrypted memory: 2040K [ 1.168768] Freeing unused kernel image memory: 2676K [ 1.168822] Write protecting the kernel read-only data: 22528k [ 1.169325] Freeing unused kernel image memory: 2008K [ 1.169528] Freeing unused kernel image memory: 1236K [ 1.180710] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.180711] x86/mm: Checking user space page tables [ 1.191558] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.191563] Run /init as init process [ 1.285836] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1.310409] usb 2-1: New USB device found, idVendor=0480, idProduct=0200, bcdDevice= 0.00 [ 1.310411] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.310412] usb 2-1: Product: External USB 3.0 [ 1.310413] usb 2-1: Manufacturer: TOSHIBA [ 1.310414] usb 2-1: SerialNumber: 20140806002737C [ 1.318515] ahci 0000:00:17.0: version 3.0 [ 1.329591] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.329596] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.330388] scsi host0: ahci [ 1.330596] scsi host1: ahci [ 1.330669] ata1: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c100 irq 125 [ 1.330672] ata2: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c180 irq 125 [ 1.341516] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.341557] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.344896] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.345114] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.345141] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.345142] cfg80211: failed to load regulatory.db [ 1.383666] usb-storage 2-1:1.0: USB Mass Storage device detected [ 1.384205] libphy: r8169: probed [ 1.384397] r8169 0000:01:00.0 eth0: RTL8168gu/8111gu, 64:1c:67:80:40:3f, XID 509, IRQ 126 [ 1.384399] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.387664] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 1.387813] scsi host2: usb-storage 2-1:1.0 [ 1.387918] usbcore: registered new interface driver usb-storage [ 1.389523] usbcore: registered new interface driver uas [ 1.393333] checking generic (90000000 410000) vs hw (90000000 10000000) [ 1.393334] fb0: switching to inteldrmfb from EFI VGA [ 1.393391] Console: switching to colour dummy device 80x25 [ 1.393421] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.393863] i915 0000:00:02.0: Direct firmware load for i915/gvt/vid_0x8086_did_0x1916_rid_0x07.golden_hw_state failed with error -2 [ 1.413397] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.413398] [drm] Driver supports precise vblank timestamp query. [ 1.414308] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.414682] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ 1.430655] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 1.433747] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.434319] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.438232] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.442204] fbcon: i915drmfb (fb0) is primary device [ 1.445107] Console: switching to colour frame buffer device 170x48 [ 1.449795] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 1.464047] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 1.602386] tsc: Refined TSC clocksource calibration: 2304.007 MHz [ 1.602392] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135fe3feda, max_idle_ns: 440795221734 ns [ 1.602444] clocksource: Switched to clocksource tsc [ 1.614510] usb 1-4: New USB device found, idVendor=0bda, idProduct=57f9, bcdDevice= 0.06 [ 1.614512] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.614514] usb 1-4: Product: EasyCamera [ 1.614515] usb 1-4: Manufacturer: K34G3E2HY [ 1.614516] usb 1-4: SerialNumber: 200901010001 [ 1.642381] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.642400] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.643577] ata1.00: ATA-9: WDC WD10JPCX-24UE4T0, 01.01A01, max UDMA/133 [ 1.643579] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 1.644834] ata1.00: configured for UDMA/133 [ 1.644985] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33 [ 1.645151] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPCX-24U 1A01 PQ: 0 ANSI: 5 [ 1.645395] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.645481] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.645483] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.645526] sd 0:0:0:0: [sda] Write Protect is off [ 1.645528] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.645585] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.647160] ata2.00: configured for UDMA/33 [ 1.661085] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE0N T.02 PQ: 0 ANSI: 5 [ 1.669796] usb 1-2.1: new low-speed USB device number 4 using xhci_hcd [ 1.715901] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.715903] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.726031] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.726245] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.726448] ath10k_pci 0000:02:00.0: qca9377 hw1.0 target 0x05020000 chip_id 0x003820ff sub 17aa:4035 [ 1.726450] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 1.727056] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877 [ 1.728822] sda: sda1 sda2 sda3 sda5 sda6 sda7 sda9 sda10 sda11 [ 1.729369] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.774054] usb 1-2.1: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.04 [ 1.774057] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.774058] usb 1-2.1: Product: Microsoft Basic Optical Mouse v2.0 [ 1.774059] usb 1-2.1: Manufacturer: Microsoft [ 1.795655] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 544289f7 [ 1.846592] io scheduler bfq registered [ 1.897800] usb 1-5: new high-speed USB device number 5 using xhci_hcd [ 2.046093] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 2.046095] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.046096] usb 1-5: Product: USB2.0-CRW [ 2.046097] usb 1-5: Manufacturer: Generic [ 2.046098] usb 1-5: SerialNumber: 20100201396000000 [ 2.125794] usb 1-2.3: new low-speed USB device number 6 using xhci_hcd [ 2.231074] usb 1-2.3: New USB device found, idVendor=1a2c, idProduct=0c23, bcdDevice= 1.10 [ 2.231076] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.231077] usb 1-2.3: Product: USB Keyboard [ 2.231078] usb 1-2.3: Manufacturer: USB [ 2.292736] psmouse serio1: synaptics: queried max coordinates: x [..5702], y [..4886] [ 2.337809] psmouse serio1: synaptics: queried min coordinates: x [1240..], y [964..] [ 2.353793] usb 1-7: new full-speed USB device number 7 using xhci_hcd [ 2.399177] scsi 2:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6 [ 2.399392] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.402271] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.402478] sd 2:0:0:0: [sdb] Write Protect is off [ 2.402480] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 2.402686] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.430499] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00523/0x840300/0x2a800/0x0, board id: 2847, fw id: 1887761 [ 2.488950] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.503042] usb 1-7: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping [ 2.503043] usb 1-7: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping [ 2.503047] usb 1-7: New USB device found, idVendor=0cf3, idProduct=e360, bcdDevice= 0.01 [ 2.503048] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.513676] hidraw: raw HID events driver (C) Jiri Kosina [ 2.518310] usbcore: registered new interface driver rtsx_usb [ 2.521179] usbcore: registered new interface driver usbhid [ 2.521180] usbhid: USB HID core driver [ 2.524797] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:045E:00CB.0001/input/input7 [ 2.524953] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:14.0-2.1/input0 [ 2.525105] input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:1A2C:0C23.0002/input/input8 [ 2.585226] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 [ 2.585904] hid-generic 0003:1A2C:0C23.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:14.0-2.3/input0 [ 2.586113] input: USB USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:1A2C:0C23.0003/input/input9 [ 2.586259] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.649909] input: USB USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:1A2C:0C23.0003/input/input10 [ 2.649985] hid-generic 0003:1A2C:0C23.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:14.0-2.3/input1 [ 3.987413] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [ 4.007065] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 4.095847] ath: EEPROM regdomain: 0x6c [ 4.095848] ath: EEPROM indicates we should expect a direct regpair map [ 4.095850] ath: Country alpha2 being used: 00 [ 4.095850] ath: Regpair used: 0x6c [ 4.097371] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 4.533526] VFIO - User Level meta-driver version: 0.3 [ 4.538252] i915 0000:00:02.0: MDEV: Registered [ 4.564040] usbcore: registered new interface driver cdc_ether [ 4.567031] usbcore: registered new interface driver rndis_host [ 4.617788] raid6: avx2x4 gen() 23238 MB/s [ 4.665788] raid6: avx2x4 xor() 14567 MB/s [ 4.713791] raid6: avx2x2 gen() 20283 MB/s [ 4.761788] raid6: avx2x2 xor() 12764 MB/s [ 4.809790] raid6: avx2x1 gen() 16741 MB/s [ 4.857789] raid6: avx2x1 xor() 11742 MB/s [ 4.905792] raid6: sse2x4 gen() 9546 MB/s [ 4.953787] raid6: sse2x4 xor() 6064 MB/s [ 5.001790] raid6: sse2x2 gen() 8252 MB/s [ 5.049789] raid6: sse2x2 xor() 5548 MB/s [ 5.097797] raid6: sse2x1 gen() 7340 MB/s [ 5.145794] raid6: sse2x1 xor() 4195 MB/s [ 5.145795] raid6: using algorithm avx2x4 gen() 23238 MB/s [ 5.145795] raid6: .... xor() 14567 MB/s, rmw enabled [ 5.145796] raid6: using avx2x2 recovery algorithm [ 5.148942] xor: automatically using best checksumming function avx [ 5.166922] Btrfs loaded, crc32c=crc32c-intel [ 7.244368] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null) [ 9.241873] systemd[1]: Inserted module 'autofs4' [ 9.834539] systemd[1]: systemd 244-3ubuntu1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 9.854479] systemd[1]: Detected architecture x86-64. [ 9.882481] systemd[1]: Set hostname to . [ 12.307142] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 13.694467] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly. [ 13.789856] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 13.790068] systemd[1]: Created slice User and Session Slice. [ 13.790135] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 13.790401] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 13.790461] systemd[1]: Reached target User and Group Name Lookups. [ 13.790473] systemd[1]: Reached target Remote File Systems. [ 13.790484] systemd[1]: Reached target Slices. [ 13.790577] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 13.790675] systemd[1]: Listening on Syslog Socket. [ 13.790753] systemd[1]: Listening on fsck to fsckd communication Socket. [ 13.790798] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 13.790982] systemd[1]: Listening on Journal Audit Socket. [ 13.791059] systemd[1]: Listening on Journal Socket (/dev/log). [ 13.791152] systemd[1]: Listening on Journal Socket. [ 13.791240] systemd[1]: Listening on udev Control Socket. [ 13.791300] systemd[1]: Listening on udev Kernel Socket. [ 13.792134] systemd[1]: Mounting Huge Pages File System... [ 13.793190] systemd[1]: Mounting POSIX Message Queue File System... [ 13.794675] systemd[1]: Mounting Kernel Debug File System... [ 13.796061] systemd[1]: Starting Journal Service... [ 13.839887] systemd[1]: Starting Set the console keyboard layout... [ 13.841245] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 13.920680] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 13.920723] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 14.003772] systemd[1]: Starting Load Kernel Modules... [ 14.004742] systemd[1]: Starting Remount Root and Kernel File Systems... [ 14.005692] systemd[1]: Starting udev Coldplug all Devices... [ 14.007122] systemd[1]: Starting Uncomplicated firewall... [ 14.008720] systemd[1]: Mounted Huge Pages File System. [ 14.008839] systemd[1]: Mounted POSIX Message Queue File System. [ 14.008940] systemd[1]: Mounted Kernel Debug File System. [ 14.009371] systemd[1]: Started Create list of static device nodes for the current kernel. [ 14.139603] EXT4-fs (sda11): re-mounted. Opts: errors=remount-ro [ 14.141601] systemd[1]: Started Remount Root and Kernel File Systems. [ 14.610451] bpfilter: Loaded bpfilter_umh pid 455 [ 14.762697] lp: driver loaded but no devices found [ 14.806528] ppdev: user-space parallel port driver [ 14.831539] systemd[1]: Starting Rebuild Hardware Database... [ 14.832394] systemd[1]: Starting Load/Save Random Seed... [ 14.833346] systemd[1]: Starting Create System Users... [ 14.833591] systemd[1]: Started Journal Service. [ 14.896989] systemd-journald[433]: Received client request to flush runtime journal. [ 22.901689] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 23.119542] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input11 [ 23.958803] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 23.958805] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 23.958806] RAPL PMU: hw unit of domain package 2^-14 Joules [ 23.958807] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 23.958808] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 23.958809] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 25.243784] mc: Linux media interface: v0.10 [ 25.269373] videodev: Linux video capture interface: v2.00 [ 25.529341] cryptd: max_cpu_qlen set to 1000 [ 25.577086] AVX2 version of gcm_enc/dec engaged. [ 25.577087] AES CTR mode by8 optimization enabled [ 26.972523] uvcvideo: Found UVC 1.00 device EasyCamera (0bda:57f9) [ 26.974933] uvcvideo 1-4:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized! [ 26.974935] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized! [ 26.974936] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized! [ 26.974937] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized! [ 26.974994] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input12 [ 26.975056] usbcore: registered new interface driver uvcvideo [ 26.975057] USB Video Class driver (1.1.1) [ 27.581174] Bluetooth: Core ver 2.22 [ 27.581191] NET: Registered protocol family 31 [ 27.581191] Bluetooth: HCI device and connection manager initialized [ 27.581195] Bluetooth: HCI socket layer initialized [ 27.581197] Bluetooth: L2CAP socket layer initialized [ 27.581199] Bluetooth: SCO socket layer initialized [ 27.860242] usbcore: registered new interface driver btusb [ 27.939753] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 28.142930] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing. [ 28.143236] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 28.143238] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 28.143240] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 28.143241] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 28.143242] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 28.143243] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 28.143244] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 28.197950] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 28.198034] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 28.198118] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 28.198197] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 28.198269] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 28.198345] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 28.198421] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 29.405438] intel_rapl_common: Found RAPL domain package [ 29.405440] intel_rapl_common: Found RAPL domain core [ 29.405441] intel_rapl_common: Found RAPL domain uncore [ 29.405442] intel_rapl_common: Found RAPL domain dram [ 34.465982] Adding 10239996k swap on /dev/sda9. Priority:0 extents:1 across:10239996k FS [ 36.590527] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 38.085121] audit: type=1400 audit(1578956402.411:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1178 comm="apparmor_parser" [ 38.085123] audit: type=1400 audit(1578956402.411:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1178 comm="apparmor_parser" [ 38.099911] audit: type=1400 audit(1578956402.427:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1179 comm="apparmor_parser" [ 38.218683] audit: type=1400 audit(1578956402.547:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1177 comm="apparmor_parser" [ 38.218686] audit: type=1400 audit(1578956402.547:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1177 comm="apparmor_parser" [ 38.218688] audit: type=1400 audit(1578956402.547:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1177 comm="apparmor_parser" [ 38.266335] audit: type=1400 audit(1578956402.595:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1187 comm="apparmor_parser" [ 38.310970] audit: type=1400 audit(1578956402.639:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=1180 comm="apparmor_parser" [ 38.310973] audit: type=1400 audit(1578956402.639:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=1180 comm="apparmor_parser" [ 38.372981] audit: type=1400 audit(1578956402.699:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=1186 comm="apparmor_parser" [ 56.045932] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 56.045933] Bluetooth: BNEP filters: protocol multicast [ 56.045937] Bluetooth: BNEP socket layer initialized [ 56.078797] NET: Registered protocol family 38 [ 64.614148] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 64.734561] r8169 0000:01:00.0 enp1s0: Link is Down [ 67.072997] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [ 69.543234] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [ 77.796409] Bluetooth: RFCOMM TTY layer initialized [ 77.796415] Bluetooth: RFCOMM socket layer initialized [ 77.796419] Bluetooth: RFCOMM ver 1.11 [ 78.802913] new mount options do not match the existing superblock, will be ignored [ 89.251062] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 91.300943] lxdbr0: port 1(vethd632b342) entered blocking state [ 91.300945] lxdbr0: port 1(vethd632b342) entered disabled state [ 91.301021] device vethd632b342 entered promiscuous mode [ 91.524848] kauditd_printk_skb: 50 callbacks suppressed [ 91.524852] audit: type=1400 audit(1578956455.851:62): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-apache-ubuntu1804_" pid=2038 comm="apparmor_parser" [ 91.594629] eth0: renamed from vethc9af1128 [ 91.618237] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 91.618266] IPv6: ADDRCONF(NETDEV_CHANGE): vethd632b342: link becomes ready [ 91.618305] lxdbr0: port 1(vethd632b342) entered blocking state [ 91.618307] lxdbr0: port 1(vethd632b342) entered forwarding state [ 91.929461] lxdbr0: port 2(veth6e0e1f5b) entered blocking state [ 91.929463] lxdbr0: port 2(veth6e0e1f5b) entered disabled state [ 91.929574] device veth6e0e1f5b entered promiscuous mode [ 91.929627] lxdbr0: port 2(veth6e0e1f5b) entered blocking state [ 91.929628] lxdbr0: port 2(veth6e0e1f5b) entered forwarding state [ 92.040013] audit: type=1400 audit(1578956456.367:63): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-cross-amd64-i386_" pid=2113 comm="apparmor_parser" [ 92.139993] eth0: renamed from veth1e3d23c9 [ 92.170512] IPv6: ADDRCONF(NETDEV_CHANGE): veth6e0e1f5b: link becomes ready [ 105.881745] audit: type=1400 audit(1578956470.207:64): apparmor="STATUS" operation="profile_load" label="lxd-apache-ubuntu1804_//&:lxd-apache-ubuntu1804_:unconfined" name="/usr/bin/man" pid=2341 comm="apparmor_parser" [ 105.881749] audit: type=1400 audit(1578956470.207:65): apparmor="STATUS" operation="profile_load" label="lxd-apache-ubuntu1804_//&:lxd-apache-ubuntu1804_:unconfined" name="man_filter" pid=2341 comm="apparmor_parser" [ 105.881751] audit: type=1400 audit(1578956470.207:66): apparmor="STATUS" operation="profile_load" label="lxd-apache-ubuntu1804_//&:lxd-apache-ubuntu1804_:unconfined" name="man_groff" pid=2341 comm="apparmor_parser" [ 105.888243] audit: type=1400 audit(1578956470.215:67): apparmor="STATUS" operation="profile_load" label="lxd-apache-ubuntu1804_//&:lxd-apache-ubuntu1804_:unconfined" name="/usr/bin/lxc-start" pid=2340 comm="apparmor_parser" [ 106.083034] audit: type=1400 audit(1578956470.411:68): apparmor="STATUS" operation="profile_load" label="lxd-apache-ubuntu1804_//&:lxd-apache-ubuntu1804_:unconfined" name="lxc-container-default" pid=2338 comm="apparmor_parser" [ 106.083039] audit: type=1400 audit(1578956470.411:69): apparmor="STATUS" operation="profile_load" label="lxd-apache-ubuntu1804_//&:lxd-apache-ubuntu1804_:unconfined" name="lxc-container-default-cgns" pid=2338 comm="apparmor_parser" [ 106.083042] audit: type=1400 audit(1578956470.411:70): apparmor="STATUS" operation="profile_load" label="lxd-apache-ubuntu1804_//&:lxd-apache-ubuntu1804_:unconfined" name="lxc-container-default-with-mounting" pid=2338 comm="apparmor_parser" [ 106.083044] audit: type=1400 audit(1578956470.411:71): apparmor="STATUS" operation="profile_load" label="lxd-apache-ubuntu1804_//&:lxd-apache-ubuntu1804_:unconfined" name="lxc-container-default-with-nesting" pid=2338 comm="apparmor_parser" [ 106.137007] audit: type=1400 audit(1578956470.463:72): apparmor="STATUS" operation="profile_load" label="lxd-apache-ubuntu1804_//&:lxd-apache-ubuntu1804_:unconfined" name="/sbin/dhclient" pid=2339 comm="apparmor_parser" [ 106.137015] audit: type=1400 audit(1578956470.463:73): apparmor="STATUS" operation="profile_load" label="lxd-apache-ubuntu1804_//&:lxd-apache-ubuntu1804_:unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2339 comm="apparmor_parser" [ 159.244425] wlp2s0: authenticate with 18:d6:c7:ee:b0:90 [ 159.272580] wlp2s0: send auth to 18:d6:c7:ee:b0:90 (try 1/3) [ 159.273563] wlp2s0: authenticated [ 159.277816] wlp2s0: associate with 18:d6:c7:ee:b0:90 (try 1/3) [ 159.278947] wlp2s0: RX AssocResp from 18:d6:c7:ee:b0:90 (capab=0x11 status=0 aid=1) [ 159.281481] wlp2s0: associated [ 159.877385] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 221.696366] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 221.787253] usb 2-1: USB disconnect, device number 2 [ 221.801747] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 221.801768] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354056 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 221.801790] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=763446 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 221.801815] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=314858 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 221.801831] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=391248 PROTO=UDP SPT=43169 DPT=8612 LEN=24 [ 221.801845] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=228403 PROTO=UDP SPT=33315 DPT=8610 LEN=24 [ 221.801859] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=64156 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 221.801872] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=75643 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 221.801884] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=657471 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 221.801896] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=252491 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 233.619289] usb 1-1: new high-speed USB device number 8 using xhci_hcd [ 233.768275] usb 1-1: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [ 233.768277] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 233.768278] usb 1-1: Product: Cruzer Blade [ 233.768279] usb 1-1: Manufacturer: SanDisk [ 233.768280] usb 1-1: SerialNumber: 4C530000240217102415 [ 233.769562] usb-storage 1-1:1.0: USB Mass Storage device detected [ 233.769671] scsi host2: usb-storage 1-1:1.0 [ 234.779901] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [ 234.781367] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 234.782482] sd 2:0:0:0: [sdb] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 234.783277] sd 2:0:0:0: [sdb] Write Protect is off [ 234.783280] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 234.783722] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 234.807859] sdb: sdb1 [ 234.810408] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 246.428519] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. [ 247.142778] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 252.720409] usb 1-1: reset high-speed USB device number 8 using xhci_hcd [ 253.076475] usb 1-1: reset high-speed USB device number 8 using xhci_hcd [ 603.607525] usb 1-1: reset high-speed USB device number 8 using xhci_hcd [ 603.756177] usb-storage 1-1:1.0: USB Mass Storage device detected [ 603.756449] scsi host2: usb-storage 1-1:1.0 [ 603.827845] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 603.827864] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354056 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 603.827885] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=763446 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 603.827910] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=314858 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 603.827926] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=391248 PROTO=UDP SPT=60810 DPT=8612 LEN=24 [ 603.827940] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=228403 PROTO=UDP SPT=59486 DPT=8610 LEN=24 [ 603.827956] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=64156 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 603.827973] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=75643 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 603.827986] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=657471 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 603.827997] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=252491 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 604.787250] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [ 604.789367] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 604.790399] sd 2:0:0:0: [sdb] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 604.790676] sd 2:0:0:0: [sdb] Write Protect is off [ 604.790678] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 604.790919] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 604.823341] sdb: sdb1 [ 604.825291] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 633.890782] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 639.535971] usb 1-1: reset high-speed USB device number 8 using xhci_hcd [ 639.895941] usb 1-1: reset high-speed USB device number 8 using xhci_hcd [ 1256.849471] usb 1-1: reset high-speed USB device number 8 using xhci_hcd [ 1256.998167] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1256.998589] scsi host2: usb-storage 1-1:1.0 [ 1257.073473] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 1257.073493] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354056 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 1257.073514] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=763446 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 1257.073539] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=314858 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 1257.073554] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=391248 PROTO=UDP SPT=42412 DPT=8612 LEN=24 [ 1257.073567] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=228403 PROTO=UDP SPT=51528 DPT=8610 LEN=24 [ 1257.073582] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=64156 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 1257.073593] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=75643 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 1257.073605] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=657471 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 1257.073616] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=252491 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 1258.013503] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [ 1258.014470] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1258.015018] sd 2:0:0:0: [sdb] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1258.015237] sd 2:0:0:0: [sdb] Write Protect is off [ 1258.015239] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 1258.015452] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1258.036352] sdb: sdb1 [ 1258.038053] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 4040.508153] /dev/loop21: Can't open blockdev [ 4300.760860] usb 1-2: USB disconnect, device number 2 [ 4300.760862] usb 1-2.1: USB disconnect, device number 4 [ 4300.799601] usb 1-2.3: USB disconnect, device number 6 [ 4300.880600] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 4300.880618] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354056 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 4300.880639] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=763446 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 4300.880664] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=314858 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 4300.880680] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=391248 PROTO=UDP SPT=16651 DPT=8612 LEN=24 [ 4300.880694] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=228403 PROTO=UDP SPT=45640 DPT=8610 LEN=24 [ 4300.880709] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=64156 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 4300.880721] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=75643 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 4300.880732] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=657471 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 4300.880744] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=252491 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 4303.928970] usb 1-2: new high-speed USB device number 9 using xhci_hcd [ 4304.079349] usb 1-2: New USB device found, idVendor=054c, idProduct=05ba, bcdDevice= 1.00 [ 4304.079351] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4304.079353] usb 1-2: Product: Storage Media [ 4304.079354] usb 1-2: Manufacturer: Sony [ 4304.079355] usb 1-2: SerialNumber: CB2501209041100058 [ 4304.080573] usb-storage 1-2:1.0: USB Mass Storage device detected [ 4304.080745] scsi host3: usb-storage 1-2:1.0 [ 4305.370117] scsi 3:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4 [ 4305.370363] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 4305.370660] sd 3:0:0:0: [sdc] 7907328 512-byte logical blocks: (4.05 GB/3.77 GiB) [ 4305.371027] sd 3:0:0:0: [sdc] Write Protect is off [ 4305.371030] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 4305.371404] sd 3:0:0:0: [sdc] No Caching mode page found [ 4305.371409] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 4305.395257] sdc: sdc1 [ 4305.396847] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 4306.369139] usb 1-3: new high-speed USB device number 10 using xhci_hcd [ 4306.517640] usb 1-3: New USB device found, idVendor=214b, idProduct=7000, bcdDevice= 1.00 [ 4306.517642] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4306.517643] usb 1-3: Product: USB2.0 HUB [ 4306.518488] hub 1-3:1.0: USB hub found [ 4306.518513] hub 1-3:1.0: 4 ports detected [ 4306.821140] usb 1-3.1: new low-speed USB device number 11 using xhci_hcd [ 4306.925730] usb 1-3.1: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.04 [ 4306.925732] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4306.925733] usb 1-3.1: Product: Microsoft Basic Optical Mouse v2.0 [ 4306.925734] usb 1-3.1: Manufacturer: Microsoft [ 4306.932578] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:045E:00CB.0004/input/input20 [ 4306.932725] hid-generic 0003:045E:00CB.0004: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:14.0-3.1/input0 [ 4307.165140] usb 1-3.3: new low-speed USB device number 12 using xhci_hcd [ 4307.270647] usb 1-3.3: New USB device found, idVendor=1a2c, idProduct=0c23, bcdDevice= 1.10 [ 4307.270649] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4307.270651] usb 1-3.3: Product: USB Keyboard [ 4307.270652] usb 1-3.3: Manufacturer: USB [ 4307.279866] input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:1A2C:0C23.0005/input/input21 [ 4307.337370] hid-generic 0003:1A2C:0C23.0005: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:14.0-3.3/input0 [ 4307.339759] input: USB USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:1A2C:0C23.0006/input/input22 [ 4307.397427] input: USB USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:1A2C:0C23.0006/input/input23 [ 4307.397532] hid-generic 0003:1A2C:0C23.0006: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:14.0-3.3/input1 [ 5609.350541] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 6317.739235] perf: interrupt took too long (3162 > 3138), lowering kernel.perf_event_max_sample_rate to 63250 [ 8651.718042] usb 1-1: USB disconnect, device number 8 [ 8652.305784] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 8652.305803] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354056 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 8652.305824] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=763446 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 8652.305849] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=314858 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 8652.305865] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=391248 PROTO=UDP SPT=30681 DPT=8612 LEN=24 [ 8652.305879] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=228403 PROTO=UDP SPT=37209 DPT=8610 LEN=24 [ 8652.305893] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=64156 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 8652.305905] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=75643 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 8652.305916] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=657471 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 8652.305927] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=252491 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 8662.041144] usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 8662.061699] usb 2-1: New USB device found, idVendor=0480, idProduct=0200, bcdDevice= 0.00 [ 8662.061701] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 8662.061702] usb 2-1: Product: External USB 3.0 [ 8662.061703] usb 2-1: Manufacturer: TOSHIBA [ 8662.061704] usb 2-1: SerialNumber: 20140806002737C [ 8662.063261] usb-storage 2-1:1.0: USB Mass Storage device detected [ 8662.063375] scsi host2: usb-storage 2-1:1.0 [ 8663.078439] scsi 2:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6 [ 8663.078796] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 8665.437398] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 8665.437607] sd 2:0:0:0: [sdb] Write Protect is off [ 8665.437610] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 8665.437817] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8665.522746] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 [ 8665.523842] sd 2:0:0:0: [sdb] Attached SCSI disk [ 8908.878351] usb 1-2: USB disconnect, device number 9 [ 8908.983526] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 8908.983544] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354056 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 8908.983565] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=763446 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 8908.983600] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=314858 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 8908.983630] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=391248 PROTO=UDP SPT=64139 DPT=8612 LEN=24 [ 8908.983645] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=228403 PROTO=UDP SPT=63529 DPT=8610 LEN=24 [ 8908.983660] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=64156 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 8908.983671] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=75643 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 8908.983683] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=657471 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 8908.983695] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=252491 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 8910.396359] usb 1-3: USB disconnect, device number 10 [ 8910.396362] usb 1-3.1: USB disconnect, device number 11 [ 8910.439619] usb 1-3.3: USB disconnect, device number 12 [ 9125.272386] show_signal_msg: 31 callbacks suppressed [ 9125.272389] GpuWatchdog[23167]: segfault at 0 ip 0000563c78264805 sp 00007fb4ace77490 error 6 in opera-beta[563c74366000+6438000] [ 9125.272398] Code: ba 03 00 00 00 b9 04 00 00 00 41 b8 01 00 00 00 e8 70 df ab fe 48 89 c7 48 89 05 ee 2f c3 02 48 8b 07 be 01 00 00 00 ff 50 30 04 25 00 00 00 00 37 13 00 00 c6 05 d9 2f c3 02 01 80 7d 87 00 [ 9976.826460] usb 1-3: new high-speed USB device number 13 using xhci_hcd [ 9976.982637] usb 1-3: New USB device found, idVendor=214b, idProduct=7000, bcdDevice= 1.00 [ 9976.982640] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9976.982642] usb 1-3: Product: USB2.0 HUB [ 9976.983809] hub 1-3:1.0: USB hub found [ 9976.983854] hub 1-3:1.0: 4 ports detected [ 9977.203800] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 9977.203825] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354056 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 9977.203854] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=763446 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 9977.203888] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=314858 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 9977.203909] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=391248 PROTO=UDP SPT=46958 DPT=8612 LEN=24 [ 9977.203929] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=228403 PROTO=UDP SPT=48341 DPT=8610 LEN=24 [ 9977.203949] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=64156 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 9977.203965] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=75643 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 9977.203981] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=657471 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 9977.203997] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=252491 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 9977.470440] usb 1-3.1: new low-speed USB device number 14 using xhci_hcd [ 9977.578659] usb 1-3.1: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.04 [ 9977.578662] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9977.578664] usb 1-3.1: Product: Microsoft Basic Optical Mouse v2.0 [ 9977.578665] usb 1-3.1: Manufacturer: Microsoft [ 9977.585082] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:045E:00CB.0007/input/input24 [ 9977.585295] hid-generic 0003:045E:00CB.0007: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:14.0-3.1/input0 [ 9977.662445] usb 1-3.3: new low-speed USB device number 15 using xhci_hcd [ 9977.767586] usb 1-3.3: New USB device found, idVendor=1a2c, idProduct=0c23, bcdDevice= 1.10 [ 9977.767589] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9977.767590] usb 1-3.3: Product: USB Keyboard [ 9977.767592] usb 1-3.3: Manufacturer: USB [ 9977.776132] input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:1A2C:0C23.0008/input/input25 [ 9977.834777] hid-generic 0003:1A2C:0C23.0008: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:14.0-3.3/input0 [ 9977.837129] input: USB USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:1A2C:0C23.0009/input/input26 [ 9977.894633] input: USB USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:1A2C:0C23.0009/input/input27 [ 9977.894761] hid-generic 0003:1A2C:0C23.0009: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:14.0-3.3/input1 [10183.882731] perf: interrupt took too long (3954 > 3952), lowering kernel.perf_event_max_sample_rate to 50500 [12686.973858] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [12687.042802] usb 2-1: USB disconnect, device number 3 [12687.317417] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [12687.317436] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354056 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [12687.317457] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=763446 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [12687.317483] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=314858 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [12687.317499] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=391248 PROTO=UDP SPT=25938 DPT=8612 LEN=24 [12687.317513] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=228403 PROTO=UDP SPT=43651 DPT=8610 LEN=24 [12687.317527] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=64156 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [12687.317539] [UFW BLOCK] IN=vethd632b342 OUT= MAC= SRC=fe80:0000:0000:0000:8c32:01ff:feeb:f965 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=75643 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [12687.317551] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=657471 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [12687.317562] [UFW BLOCK] IN=veth6e0e1f5b OUT= MAC= SRC=fe80:0000:0000:0000:006d:cbff:fe12:160f DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=252491 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [12765.053782] usb 1-1: new high-speed USB device number 16 using xhci_hcd [12765.202161] usb 1-1: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [12765.202164] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [12765.202166] usb 1-1: Product: Cruzer Blade [12765.202168] usb 1-1: Manufacturer: SanDisk [12765.202169] usb 1-1: SerialNumber: 4C530000240217102415 [12765.205137] usb-storage 1-1:1.0: USB Mass Storage device detected [12765.208735] scsi host2: usb-storage 1-1:1.0 [12765.402908] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [12765.402927] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354056 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [12765.402947] [UFW BLOCK] IN=lxdbr0 OUT= MAC= SRC=fe80:0000:0000:0000:700a:11ff:fe92:5395 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=763446 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [12766.218546] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [12766.221396] sd 2:0:0:0: Attached scsi generic sg2 type 0 [12766.228057] sd 2:0:0:0: [sdb] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB) [12766.232186] sd 2:0:0:0: [sdb] Write Protect is off [12766.232189] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [12766.232471] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [12766.273792] sdb: sdb1 [12766.277161] sd 2:0:0:0: [sdb] Attached SCSI removable disk [12777.196309] [UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:e682:df38:ee2c:bdc5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=885059 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [12782.849042] usb 1-1: reset high-speed USB device number 16 using xhci_hcd [12783.213110] usb 1-1: reset high-speed USB device number 16 using xhci_hcd [12806.379878] usb 1-1: reset high-speed USB device number 16 using xhci_hcd [12807.035531] usb 1-1: reset high-speed USB device number 16 using xhci_hcd [12807.527748] usb 1-1: reset high-speed USB device number 16 using xhci_hcd [12807.927982] usb 1-1: reset high-speed USB device number 16 using xhci_hcd