[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-12-generic (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu7) ) #41-Ubuntu SMP Wed Oct 7 19:37:12 UTC 2009 (Ubuntu 2.6.31-12.41-generic) [ 0.000000] Command line: root=UUID=4e5854c7-84cb-44f5-a093-6aa3512e5ff2 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fff0000 @ 10000-14000 [ 0.000000] RAMDISK: 378a9000 - 37fef35b [ 0.000000] ACPI: RSDP 00000000000f9250 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 000000007fff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007fff3180 063C4 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007fff0000 00040 [ 0.000000] ACPI: SSDT 000000007fff9680 001CA (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG 000000007fff98c0 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000007fff95c0 00072 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000026fff] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019d9bcc] TEXT DATA BSS ==> [0001000000 - 00019d9bcc] [ 0.000000] #3 [00378a9000 - 0037fef35b] RAMDISK ==> [00378a9000 - 0037fef35b] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [00019da000 - 00019da0b6] BRK ==> [00019da000 - 00019da0b6] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f5370] f5370 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524159 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 101 pages reserved [ 0.000000] DMA zone: 3826 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513064 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff8800019eb000, static data 89952 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516890 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=4e5854c7-84cb-44f5-a093-6aa3512e5ff2 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ ebac000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2050032k/2097088k available (5290k kernel code, 452k absent, 46604k reserved, 2997k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2209.968 MHz processor. [ 0.000013] spurious 8259A interrupt: IRQ7. [ 0.001318] Console: colour VGA+ 80x25 [ 0.001321] console [tty0] enabled [ 0.010000] allocated 20971520 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.93 BogoMIPS (lpj=22099680) [ 0.010040] Security Framework initialized [ 0.010067] AppArmor: AppArmor initialized [ 0.010245] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011837] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.012593] Mount-cache hash table entries: 256 [ 0.012760] Initializing cgroup subsys ns [ 0.012764] Initializing cgroup subsys cpuacct [ 0.012768] Initializing cgroup subsys memory [ 0.012777] Initializing cgroup subsys freezer [ 0.012779] Initializing cgroup subsys net_cls [ 0.012793] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012795] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012798] CPU 0/0x0 -> Node 0 [ 0.012800] tseg: 0000000000 [ 0.012816] CPU: Physical Processor ID: 0 [ 0.012818] CPU: Processor Core ID: 0 [ 0.012821] Performance Counters: AMD PMU driver. [ 0.012827] ... version: 0 [ 0.012828] ... bit width: 48 [ 0.012830] ... generic counters: 4 [ 0.012831] ... value mask: 0000ffffffffffff [ 0.012833] ... max period: 00007fffffffffff [ 0.012835] ... fixed-purpose counters: 0 [ 0.012836] ... counter mask: 000000000000000f [ 0.014335] ACPI: Core revision 20090521 [ 0.024765] Setting APIC routing to flat [ 0.025071] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.125086] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01 [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4420.50 BogoMIPS (lpj=22102542) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.280208] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01 [ 0.280220] Brought up 2 CPUs [ 0.280222] Total of 2 processors activated (8840.44 BogoMIPS). [ 0.280280] CPU0 attaching sched-domain: [ 0.280283] domain 0: span 0-1 level MC [ 0.280286] groups: 0 1 [ 0.280291] CPU1 attaching sched-domain: [ 0.280293] domain 0: span 0-1 level MC [ 0.280295] groups: 1 0 [ 0.280366] Booting paravirtualized kernel on bare hardware [ 0.280366] regulator: core version 0.5 [ 0.280366] Time: 22:58:30 Date: 10/08/09 [ 0.280366] NET: Registered protocol family 16 [ 0.280366] node 0 link 0: io port [5000, ffff] [ 0.280366] TOM: 0000000080000000 aka 2048M [ 0.280366] node 0 link 0: mmio [a0000, bffff] [ 0.280366] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.280366] node 0 link 0: mmio [80000000, fe02ffff] [ 0.280366] node 0 link 0: mmio [e0000000, e05fffff] [ 0.280366] bus: [00,05] on node 0 link 0 [ 0.280366] bus: 00 index 0 io port: [0, ffff] [ 0.280366] bus: 00 index 1 mmio: [a0000, bffff] [ 0.280366] bus: 00 index 2 mmio: [fe030000, fcffffffff] [ 0.280366] bus: 00 index 3 mmio: [80000000, fe02ffff] [ 0.280366] ACPI: bus type pci registered [ 0.280366] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.280366] PCI: MCFG area at e0000000 reserved in E820 [ 0.282885] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.282887] PCI: Using configuration type 1 for base access [ 0.283739] bio: create slab at 0 [ 0.283739] ACPI: EC: Look up EC in DSDT [ 0.294268] ACPI: Interpreter enabled [ 0.294272] ACPI: (supports S0 S1 S4 S5) [ 0.294297] ACPI: Using IOAPIC for interrupt routing [ 0.302142] ACPI: No dock devices found. [ 0.303140] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.303247] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.303263] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc1f] [ 0.303271] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.303275] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.303285] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.303288] pci 0000:00:01.1: PME# disabled [ 0.303307] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.303323] pci 0000:00:02.0: supports D1 D2 [ 0.303325] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.303328] pci 0000:00:02.0: PME# disabled [ 0.303346] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.303365] pci 0000:00:02.1: supports D1 D2 [ 0.303367] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.303370] pci 0000:00:02.1: PME# disabled [ 0.303391] pci 0000:00:04.0: reg 10 io port: [0xf000-0xf0ff] [ 0.303395] pci 0000:00:04.0: reg 14 io port: [0xec00-0xecff] [ 0.303399] pci 0000:00:04.0: reg 18 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.303412] pci 0000:00:04.0: supports D1 D2 [ 0.303432] pci 0000:00:06.0: reg 20 io port: [0xe000-0xe00f] [ 0.303455] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7] [ 0.303459] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3] [ 0.303462] pci 0000:00:07.0: reg 18 io port: [0x970-0x977] [ 0.303466] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73] [ 0.303469] pci 0000:00:07.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.303473] pci 0000:00:07.0: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.303506] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.303510] pci 0000:00:0a.0: reg 14 io port: [0xc800-0xc807] [ 0.303525] pci 0000:00:0a.0: supports D1 D2 [ 0.303527] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.303530] pci 0000:00:0a.0: PME# disabled [ 0.303556] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.303559] pci 0000:00:0b.0: PME# disabled [ 0.303586] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.303589] pci 0000:00:0c.0: PME# disabled [ 0.303616] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.303619] pci 0000:00:0d.0: PME# disabled [ 0.303645] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.303648] pci 0000:00:0e.0: PME# disabled [ 0.303741] pci 0000:01:06.0: reg 10 io port: [0xbc00-0xbcff] [ 0.303746] pci 0000:01:06.0: reg 14 32bit mmio: [0xfdeff000-0xfdeff0ff] [ 0.303781] pci 0000:01:07.0: reg 10 io port: [0xb800-0xb807] [ 0.303785] pci 0000:01:07.0: reg 14 io port: [0xb400-0xb403] [ 0.303790] pci 0000:01:07.0: reg 18 io port: [0xb000-0xb007] [ 0.303795] pci 0000:01:07.0: reg 1c io port: [0xac00-0xac03] [ 0.303800] pci 0000:01:07.0: reg 20 io port: [0xa800-0xa80f] [ 0.303807] pci 0000:01:07.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.303818] pci 0000:01:07.0: supports D1 D2 [ 0.303837] pci 0000:01:08.0: reg 10 io port: [0xa400-0xa407] [ 0.303842] pci 0000:01:08.0: reg 14 io port: [0xa000-0xa003] [ 0.303846] pci 0000:01:08.0: reg 18 io port: [0x9c00-0x9c07] [ 0.303851] pci 0000:01:08.0: reg 1c io port: [0x9800-0x9803] [ 0.303856] pci 0000:01:08.0: reg 20 io port: [0x9400-0x940f] [ 0.303863] pci 0000:01:08.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.303874] pci 0000:01:08.0: supports D1 D2 [ 0.303895] pci 0000:01:09.0: reg 10 32bit mmio: [0xfdefc000-0xfdefdfff] [ 0.303944] pci 0000:01:0c.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff] [ 0.303949] pci 0000:01:0c.0: reg 14 io port: [0x9000-0x907f] [ 0.303975] pci 0000:01:0c.0: supports D2 [ 0.303977] pci 0000:01:0c.0: PME# supported from D2 D3hot D3cold [ 0.303981] pci 0000:01:0c.0: PME# disabled [ 0.304000] pci 0000:00:09.0: transparent bridge [ 0.304003] pci 0000:00:09.0: bridge io port: [0x9000-0xbfff] [ 0.304006] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.304009] pci 0000:00:09.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.304041] pci 0000:00:0b.0: bridge io port: [0x8000-0x8fff] [ 0.304044] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.304048] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.304080] pci 0000:00:0c.0: bridge io port: [0x7000-0x7fff] [ 0.304082] pci 0000:00:0c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.304086] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] [ 0.304118] pci 0000:00:0d.0: bridge io port: [0x6000-0x6fff] [ 0.304120] pci 0000:00:0d.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff] [ 0.304124] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff] [ 0.304146] pci 0000:05:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.304153] pci 0000:05:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.304159] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] [ 0.304164] pci 0000:05:00.0: reg 24 io port: [0x5c00-0x5c7f] [ 0.304168] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.304215] pci 0000:00:0e.0: bridge io port: [0x5000-0x5fff] [ 0.304217] pci 0000:00:0e.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] [ 0.304221] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.304234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.304476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.363067] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.363230] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.363392] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.363554] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.363716] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.363879] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.364039] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.364202] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.364369] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.364531] ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.364692] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.364853] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.365014] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.365186] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.365356] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.365526] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.365711] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.365890] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.366068] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.366246] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.366358] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.366545] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.366731] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.366917] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.367102] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.367288] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0 [ 0.367473] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.367664] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.367854] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.368048] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.368243] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 0.368438] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.368651] SCSI subsystem initialized [ 0.368712] libata version 3.00 loaded. [ 0.368712] usbcore: registered new interface driver usbfs [ 0.368712] usbcore: registered new interface driver hub [ 0.368712] usbcore: registered new device driver usb [ 0.368712] ACPI: WMI: Mapper loaded [ 0.368712] PCI: Using ACPI for IRQ routing [ 0.390006] Bluetooth: Core ver 2.15 [ 0.390023] NET: Registered protocol family 31 [ 0.390023] Bluetooth: HCI device and connection manager initialized [ 0.390023] Bluetooth: HCI socket layer initialized [ 0.390023] NetLabel: Initializing [ 0.390023] NetLabel: domain hash size = 128 [ 0.390023] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.390040] NetLabel: unlabeled traffic allowed by default [ 0.420021] pnp: PnP ACPI init [ 0.420045] ACPI: bus type pnp registered [ 0.425676] pnp: PnP ACPI: found 13 devices [ 0.425678] ACPI: ACPI bus type pnp unregistered [ 0.425689] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.425692] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.425695] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.425698] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.425701] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.425704] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.425709] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.425712] system 00:02: ioport range 0x290-0x29e has been reserved [ 0.425719] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.425724] system 00:0c: iomem range 0xdb600-0xdbfff has been reserved [ 0.425727] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.425730] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.425732] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.425735] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.425738] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.425741] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.425744] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.425747] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.425750] system 00:0c: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.425753] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.425755] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.425758] system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.425761] system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.430448] AppArmor: AppArmor Filesystem Enabled [ 0.430486] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.430489] pci 0000:00:09.0: IO window: 0x9000-0xbfff [ 0.430493] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff [ 0.430496] pci 0000:00:09.0: PREFETCH window: 0xfdf00000-0xfdffffff [ 0.430500] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.430502] pci 0000:00:0b.0: IO window: 0x8000-0x8fff [ 0.430506] pci 0000:00:0b.0: MEM window: 0xfdd00000-0xfddfffff [ 0.430509] pci 0000:00:0b.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.430513] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.430515] pci 0000:00:0c.0: IO window: 0x7000-0x7fff [ 0.430519] pci 0000:00:0c.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.430522] pci 0000:00:0c.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.430526] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.430528] pci 0000:00:0d.0: IO window: 0x6000-0x6fff [ 0.430532] pci 0000:00:0d.0: MEM window: 0xfd900000-0xfd9fffff [ 0.430535] pci 0000:00:0d.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff [ 0.430539] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05 [ 0.430542] pci 0000:00:0e.0: IO window: 0x5000-0x5fff [ 0.430546] pci 0000:00:0e.0: MEM window: 0xfa000000-0xfcffffff [ 0.430549] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.430558] pci 0000:00:09.0: setting latency timer to 64 [ 0.430563] pci 0000:00:0b.0: setting latency timer to 64 [ 0.430567] pci 0000:00:0c.0: setting latency timer to 64 [ 0.430571] pci 0000:00:0d.0: setting latency timer to 64 [ 0.430576] pci 0000:00:0e.0: setting latency timer to 64 [ 0.430580] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.430583] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.430586] pci_bus 0000:01: resource 0 io: [0x9000-0xbfff] [ 0.430588] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.430591] pci_bus 0000:01: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.430594] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.430596] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.430599] pci_bus 0000:02: resource 0 io: [0x8000-0x8fff] [ 0.430602] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.430604] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.430607] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff] [ 0.430610] pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.430613] pci_bus 0000:03: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.430615] pci_bus 0000:04: resource 0 io: [0x6000-0x6fff] [ 0.430618] pci_bus 0000:04: resource 1 mem: [0xfd900000-0xfd9fffff] [ 0.430620] pci_bus 0000:04: resource 2 pref mem [0xfd800000-0xfd8fffff] [ 0.430623] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff] [ 0.430626] pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfcffffff] [ 0.430629] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.430671] NET: Registered protocol family 2 [ 0.430808] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.431779] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.434710] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.435433] TCP: Hash tables configured (established 262144 bind 65536) [ 0.435437] TCP reno registered [ 0.435553] NET: Registered protocol family 1 [ 0.435633] Trying to unpack rootfs image as initramfs... [ 0.440030] Switched to high resolution mode on CPU 0 [ 0.440133] Switched to high resolution mode on CPU 1 [ 0.606606] Freeing initrd memory: 7448k freed [ 0.612292] Scanning for low memory corruption every 60 seconds [ 0.612447] audit: initializing netlink socket (disabled) [ 0.612464] type=2000 audit(1255042710.610:1): initialized [ 0.621103] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.622513] VFS: Disk quotas dquot_6.5.2 [ 0.622569] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.623165] fuse init (API version 7.12) [ 0.623250] msgmni has been set to 4018 [ 0.623482] alg: No test for stdrng (krng) [ 0.623493] io scheduler noop registered [ 0.623495] io scheduler anticipatory registered [ 0.623497] io scheduler deadline registered [ 0.623540] io scheduler cfq registered (default) [ 0.640100] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.640105] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 0.640112] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.640116] pci 0000:00:0b.0: Linking AER extended capability [ 0.640151] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.640156] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 0.640163] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.640165] pci 0000:00:0c.0: Linking AER extended capability [ 0.640203] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.640208] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.640215] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.640218] pci 0000:00:0d.0: Linking AER extended capability [ 0.640259] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.640264] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.640271] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.640273] pci 0000:00:0e.0: Linking AER extended capability [ 0.640297] pci 0000:05:00.0: Boot video device [ 0.640435] alloc irq_desc for 24 on node 0 [ 0.640437] alloc kstat_irqs on node 0 [ 0.640446] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X [ 0.640452] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 0.640552] alloc irq_desc for 25 on node 0 [ 0.640553] alloc kstat_irqs on node 0 [ 0.640558] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X [ 0.640562] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 0.640661] alloc irq_desc for 26 on node 0 [ 0.640663] alloc kstat_irqs on node 0 [ 0.640668] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X [ 0.640673] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 0.640768] alloc irq_desc for 27 on node 0 [ 0.640769] alloc kstat_irqs on node 0 [ 0.640774] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X [ 0.640778] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 0.640842] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.640866] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.640999] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.641003] ACPI: Power Button [PWRF] [ 0.641062] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.641065] ACPI: Power Button [PWRB] [ 0.641120] fan PNP0C0B:00: registered as cooling_device0 [ 0.641125] ACPI: Fan [FAN] (on) [ 0.641747] processor LNXCPU:00: registered as cooling_device1 [ 0.641780] processor LNXCPU:01: registered as cooling_device2 [ 0.645576] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.645583] ACPI: Thermal Zone [THRM] (22 C) [ 0.646656] Linux agpgart interface v0.103 [ 0.646668] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.646760] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.647000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.647940] brd: module loaded [ 0.648356] loop: module loaded [ 0.648438] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.648732] sata_nv 0000:00:07.0: version 3.5 [ 0.649201] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.649206] alloc irq_desc for 23 on node 0 [ 0.649208] alloc kstat_irqs on node 0 [ 0.649218] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.649273] sata_nv 0000:00:07.0: setting latency timer to 64 [ 0.649352] scsi0 : sata_nv [ 0.649472] scsi1 : sata_nv [ 0.649630] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 23 [ 0.649633] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 23 [ 0.649763] pata_amd 0000:00:06.0: version 0.4.1 [ 0.649797] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.649863] scsi2 : pata_amd [ 0.649936] scsi3 : pata_amd [ 0.650862] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 [ 0.650864] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15 [ 0.651177] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 0.651182] alloc irq_desc for 17 on node 0 [ 0.651184] alloc kstat_irqs on node 0 [ 0.651191] pata_cmd64x 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 0.651292] scsi4 : pata_cmd64x [ 0.651362] scsi5 : pata_cmd64x [ 0.651394] ata5: PATA max UDMA/100 cmd 0xb800 ctl 0xb400 bmdma 0xa800 irq 17 [ 0.651396] ata6: PATA max UDMA/100 cmd 0xb000 ctl 0xac00 bmdma 0xa808 irq 17 [ 0.651456] pata_cmd64x: active 10 recovery 10 setup 3. [ 0.651463] pata_cmd64x: active 10 recovery 10 setup 3. [ 0.651665] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 0.651668] alloc irq_desc for 18 on node 0 [ 0.651670] alloc kstat_irqs on node 0 [ 0.651676] pata_cmd64x 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 0.651766] scsi6 : pata_cmd64x [ 0.651842] scsi7 : pata_cmd64x [ 0.651871] ata7: PATA max UDMA/100 cmd 0xa400 ctl 0xa000 bmdma 0x9400 irq 18 [ 0.651874] ata8: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x9408 irq 18 [ 0.652484] Fixed MDIO Bus: probed [ 0.652519] PPP generic driver version 2.4.2 [ 0.652631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.653004] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.653008] alloc irq_desc for 22 on node 0 [ 0.653010] alloc kstat_irqs on node 0 [ 0.653017] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.653034] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.653037] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.653100] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.653134] ehci_hcd 0000:00:02.1: debug port 1 [ 0.653138] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.653156] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 [ 0.653180] pata_cmd64x: active 10 recovery 10 setup 3. [ 0.653184] pata_cmd64x: active 10 recovery 10 setup 3. [ 0.670016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.670099] usb usb1: configuration #1 chosen from 1 choice [ 0.670129] hub 1-0:1.0: USB hub found [ 0.670136] hub 1-0:1.0: 10 ports detected [ 0.670229] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.670637] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.670642] alloc irq_desc for 21 on node 0 [ 0.670644] alloc kstat_irqs on node 0 [ 0.670652] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 [ 0.670669] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.670671] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.670711] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.670735] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 [ 0.732085] usb usb2: configuration #1 chosen from 1 choice [ 0.732113] hub 2-0:1.0: USB hub found [ 0.732121] hub 2-0:1.0: 10 ports detected [ 0.732186] uhci_hcd: USB Universal Host Controller Interface driver [ 0.732305] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.732307] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.732640] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.732708] mice: PS/2 mouse device common for all mice [ 0.732797] rtc_cmos 00:04: RTC can wake from S4 [ 0.732837] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.732859] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.732957] device-mapper: uevent: version 1.0.3 [ 0.733065] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.733172] device-mapper: multipath: version 1.1.0 loaded [ 0.733176] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.733391] cpuidle: using governor ladder [ 0.733394] cpuidle: using governor menu [ 0.733813] TCP cubic registered [ 0.733934] NET: Registered protocol family 10 [ 0.734335] lo: Disabled Privacy Extensions [ 0.734599] NET: Registered protocol family 17 [ 0.734621] Bluetooth: L2CAP ver 2.13 [ 0.734623] Bluetooth: L2CAP socket layer initialized [ 0.734626] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.734627] Bluetooth: SCO socket layer initialized [ 0.734682] Bluetooth: RFCOMM TTY layer initialized [ 0.734685] Bluetooth: RFCOMM socket layer initialized [ 0.734687] Bluetooth: RFCOMM ver 1.11 [ 0.734695] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) [ 0.734753] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 [ 0.734756] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa [ 0.734758] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc [ 0.734761] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 0.734873] PM: Resume from disk failed. [ 0.734887] registered taskstats version 1 [ 0.735051] Magic number: 13:402:1007 [ 0.735091] pnp 00:09: hash matches [ 0.735153] rtc_cmos 00:04: setting system clock to 2009-10-08 22:58:31 UTC (1255042711) [ 0.735156] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.735158] EDD information not available. [ 0.755229] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.802523] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.823163] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 0.823166] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.843316] ata1.00: configured for UDMA/133 [ 0.843418] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 0.843534] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.843572] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.843610] sd 0:0:0:0: [sda] Write Protect is off [ 0.843613] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.843633] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.843750] sda: sda1 sda2 < [ 0.850379] ata5.00: ATA-6: WDC WD3200JB-00KFA0, 08.05J08, max UDMA/100 [ 0.850381] ata5.00: 625142448 sectors, multi 16: LBA48 [ 0.850710] ata5.01: ATA-6: HDS722525VLAT80, V36OA6MA, max UDMA/100 [ 0.850712] ata5.01: 488397168 sectors, multi 16: LBA48 [ 0.850733] pata_cmd64x: active 3 recovery 1 setup 1. [ 0.850737] pata_cmd64x: active 3 recovery 1 setup 1. [ 0.863297] ata7.00: ATA-7: SAMSUNG SP2014N, VC100-30, max UDMA/133 [ 0.863300] ata7.00: 390721968 sectors, multi 16: LBA48 [ 0.863635] ata7.01: ATA-6: HDS722525VLAT80, V36OA6MA, max UDMA/100 [ 0.863638] ata7.01: 488397168 sectors, multi 16: LBA48 [ 0.863656] pata_cmd64x: active 3 recovery 1 setup 1. [ 0.863660] pata_cmd64x: active 3 recovery 1 setup 1. [ 0.864816] ata3.00: ATA-7: Maxtor 6B250R0, BAH41BM0, max UDMA/133 [ 0.864819] ata3.00: 490234752 sectors, multi 16: LBA48 [ 0.865051] ata3.01: ATA-6: IC35L180AVV207-1, V26OA63A, max UDMA/100 [ 0.865054] ata3.01: 361882080 sectors, multi 16: LBA48 [ 0.865075] ata3: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c6c000) ACPI=0x7f01f (15:20:0x1f) [ 0.865079] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc7c6c000) ACPI=0x3f01f (15:20:0x1f) [ 0.866081] sda5 sda6 > [ 0.880462] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.883007] ata5.00: configured for UDMA/100 [ 0.903209] ata7.00: configured for UDMA/100 [ 0.904581] ata3.00: configured for UDMA/133 [ 0.943441] ata5.01: configured for UDMA/100 [ 0.960666] ata3.01: configured for UDMA/100 [ 0.960692] ata7.01: configured for UDMA/100 [ 1.002523] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.020202] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 1.020205] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.040224] ata2.00: configured for UDMA/133 [ 1.040286] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 1.040403] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.040436] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.040472] sd 1:0:0:0: [sdb] Write Protect is off [ 1.040475] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.040493] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.040591] sdb: [ 1.040706] scsi 2:0:0:0: Direct-Access ATA Maxtor 6B250R0 BAH4 PQ: 0 ANSI: 5 [ 1.040795] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.040846] scsi 2:0:1:0: Direct-Access ATA IC35L180AVV207-1 V26O PQ: 0 ANSI: 5 [ 1.040930] sd 2:0:1:0: Attached scsi generic sg3 type 0 [ 1.041059] sd 2:0:1:0: [sdd] 361882080 512-byte logical blocks: (185 GB/172 GiB) [ 1.041094] sd 2:0:1:0: [sdd] Write Protect is off [ 1.041096] sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.041114] sd 2:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.041206] sdd: sdb1 [ 1.044769] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.049734] sdd1 [ 1.049873] sd 2:0:1:0: [sdd] Attached SCSI disk [ 1.049883] sd 2:0:0:0: [sdc] 490234752 512-byte logical blocks: (251 GB/233 GiB) [ 1.049918] sd 2:0:0:0: [sdc] Write Protect is off [ 1.049921] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.049939] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.050031] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 > [ 1.111519] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.222779] ata4.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33 [ 1.222802] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc7c6c000) ACPI=0x701f (60:120:0x1b) [ 1.262735] ata4.00: configured for UDMA/33 [ 1.263942] scsi 3:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5 [ 1.266773] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.266776] Uniform CD-ROM driver Revision: 3.20 [ 1.266845] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.266888] sr 3:0:0:0: Attached scsi generic sg4 type 5 [ 1.266971] scsi 4:0:0:0: Direct-Access ATA WDC WD3200JB-00K 08.0 PQ: 0 ANSI: 5 [ 1.267095] sd 4:0:0:0: [sde] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.267108] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 1.267132] sd 4:0:0:0: [sde] Write Protect is off [ 1.267135] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.267182] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.267188] scsi 4:0:1:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 [ 1.267310] sd 4:0:1:0: [sdf] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.267316] sd 4:0:1:0: Attached scsi generic sg6 type 0 [ 1.267347] pata_cmd64x: active 10 recovery 10 setup 3. [ 1.267352] pata_cmd64x: active 10 recovery 10 setup 3. [ 1.267471] sde: [ 1.281673] sd 4:0:1:0: [sdf] Write Protect is off [ 1.281675] sd 4:0:1:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.281694] sd 4:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.281788] sdf: sde1 [ 1.286840] sdf1 [ 1.286994] sd 4:0:1:0: [sdf] Attached SCSI disk [ 1.287060] sd 4:0:0:0: [sde] Attached SCSI disk [ 1.390024] usb 2-5: new full speed USB device using ohci_hcd and address 2 [ 1.500433] ata6.00: ATA-6: IC35L180AVV207-1, V26OA66A, max UDMA/100 [ 1.500436] ata6.00: 361882080 sectors, multi 16: LBA48 [ 1.500761] ata6.01: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 [ 1.500764] ata6.01: 488397168 sectors, multi 16: LBA48 [ 1.500785] pata_cmd64x: active 3 recovery 1 setup 1. [ 1.500789] pata_cmd64x: active 3 recovery 1 setup 1. [ 1.560397] ata6.00: configured for UDMA/100 [ 1.620481] ata6.01: configured for UDMA/100 [ 1.620541] scsi 5:0:0:0: Direct-Access ATA IC35L180AVV207-1 V26O PQ: 0 ANSI: 5 [ 1.620668] sd 5:0:0:0: [sdg] 361882080 512-byte logical blocks: (185 GB/172 GiB) [ 1.620672] sd 5:0:0:0: Attached scsi generic sg7 type 0 [ 1.620717] sd 5:0:0:0: [sdg] Write Protect is off [ 1.620720] sd 5:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 1.620731] scsi 5:0:1:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 [ 1.620743] sd 5:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.620842] sd 5:0:1:0: Attached scsi generic sg8 type 0 [ 1.620886] sd 5:0:1:0: [sdh] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.620910] scsi 6:0:0:0: Direct-Access ATA SAMSUNG SP2014N VC10 PQ: 0 ANSI: 5 [ 1.620925] sd 5:0:1:0: [sdh] Write Protect is off [ 1.620928] sd 5:0:1:0: [sdh] Mode Sense: 00 3a 00 00 [ 1.620947] sd 5:0:1:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.621023] sd 6:0:0:0: Attached scsi generic sg9 type 0 [ 1.621076] scsi 6:0:1:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 [ 1.621080] sdh: [ 1.621165] sd 6:0:1:0: Attached scsi generic sg10 type 0 [ 1.621199] sd 6:0:0:0: [sdi] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 1.621208] sd 6:0:1:0: [sdj] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.621252] pata_cmd64x: active 10 recovery 10 setup 3. [ 1.621257] pata_cmd64x: active 10 recovery 10 setup 3. [ 1.621273] sd 6:0:1:0: [sdj] Write Protect is off [ 1.621276] sd 6:0:1:0: [sdj] Mode Sense: 00 3a 00 00 [ 1.621294] sd 6:0:1:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.621365] sd 6:0:0:0: [sdi] Write Protect is off [ 1.621368] sd 6:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 1.621410] sd 6:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.621437] sdj: sdj1 [ 1.639805] sd 6:0:1:0: [sdj] Attached SCSI disk [ 1.639869] sdi: sdh1 [ 1.641451] sdg: sdg1 [ 1.648503] sd 5:0:0:0: [sdg] Attached SCSI disk [ 1.648567] sd 5:0:1:0: [sdh] Attached SCSI disk [ 1.656355] sdi1 [ 1.656498] sd 6:0:0:0: [sdi] Attached SCSI disk [ 1.701086] usb 2-5: configuration #1 chosen from 1 choice [ 1.840493] ata8.00: ATA-7: HDS725050KLAT80, K2AOAB0A, max UDMA/133 [ 1.840496] ata8.00: 976773168 sectors, multi 16: LBA48 [ 1.840829] ata8.01: ATA-6: HDS722525VLAT80, V36OA6MA, max UDMA/100 [ 1.840832] ata8.01: 488397168 sectors, multi 16: LBA48 [ 1.840853] pata_cmd64x: active 3 recovery 1 setup 1. [ 1.840858] pata_cmd64x: active 3 recovery 1 setup 1. [ 1.880444] ata8.00: configured for UDMA/100 [ 1.943036] ata8.01: configured for UDMA/100 [ 1.943100] scsi 7:0:0:0: Direct-Access ATA HDS725050KLAT80 K2AO PQ: 0 ANSI: 5 [ 1.943220] sd 7:0:0:0: Attached scsi generic sg11 type 0 [ 1.943271] scsi 7:0:1:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 [ 1.943355] sd 7:0:1:0: Attached scsi generic sg12 type 0 [ 1.943386] sd 7:0:0:0: [sdk] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.943429] sd 7:0:0:0: [sdk] Write Protect is off [ 1.943431] sd 7:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [ 1.943451] sd 7:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.943557] sdk: [ 1.956429] sd 7:0:1:0: [sdl] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.956464] sd 7:0:1:0: [sdl] Write Protect is off [ 1.956466] sd 7:0:1:0: [sdl] Mode Sense: 00 3a 00 00 [ 1.956484] sd 7:0:1:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.956573] sdl: sdk1 [ 1.979217] sd 7:0:0:0: [sdk] Attached SCSI disk [ 2.028425] [LDM] sdl1 [ 2.028881] sd 7:0:1:0: [sdl] Attached SCSI disk [ 2.028918] Freeing unused kernel memory: 660k freed [ 2.029281] Write protecting the kernel read-only data: 7544k [ 2.042547] usb 2-7: new low speed USB device using ohci_hcd and address 3 [ 2.248496] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.248614] 8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 2.251258] 8139too Fast Ethernet driver 0.9.28 [ 2.251599] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 2.251605] alloc irq_desc for 16 on node 0 [ 2.251607] alloc kstat_irqs on node 0 [ 2.251617] 8139too 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 2.252469] eth0: RealTek RTL8139 at 0xbc00, 00:20:18:8c:40:29, IRQ 16 [ 2.304179] usb 2-7: configuration #1 chosen from 1 choice [ 2.334753] Floppy drive(s): fd0 is 1.44M [ 2.359462] FDC 0 is a post-1991 82077 [ 2.373701] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.374137] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 2.374145] alloc irq_desc for 20 on node 0 [ 2.374147] alloc kstat_irqs on node 0 [ 2.374159] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 [ 2.374165] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 2.374233] nv_probe: set workaround bit for reversed mac addr [ 2.383697] usbcore: registered new interface driver hiddev [ 2.387551] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 2.387560] alloc irq_desc for 19 on node 0 [ 2.387562] alloc kstat_irqs on node 0 [ 2.387574] ohci1394 0000:01:0c.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 2.387580] ohci1394 0000:01:0c.0: setting latency timer to 64 [ 2.390477] xor: automatically using best checksumming function: generic_sse [ 2.392422] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input4 [ 2.392529] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:02.0-7/input0 [ 2.392550] usbcore: registered new interface driver usbhid [ 2.392553] usbhid: v2.6:USB HID core driver [ 2.440017] generic_sse: 7059.600 MB/sec [ 2.440019] xor: using function: generic_sse (7059.600 MB/sec) [ 2.441066] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.455319] device-mapper: dm-raid45: initialized v0.2594b [ 2.910828] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:16:17:16:78:4f [ 2.910833] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 3.561580] PM: Starting manual resume from disk [ 3.561585] PM: Resume from partition 8:38 [ 3.561587] PM: Checking hibernation image. [ 3.561749] PM: Resume from disk failed. [ 3.575973] kjournald starting. Commit interval 5 seconds [ 3.576001] EXT3-fs: mounted filesystem with writeback data mode. [ 3.762897] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000cf96be] [ 4.197506] type=1505 audit(1255042714.957:2): operation="profile_load" pid=525 name=/usr/share/gdm/guest-session/Xsession [ 4.208265] type=1505 audit(1255042714.967:3): operation="profile_load" pid=526 name=/sbin/dhclient3 [ 4.208537] type=1505 audit(1255042714.967:4): operation="profile_load" pid=526 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.208695] type=1505 audit(1255042714.967:5): operation="profile_load" pid=526 name=/usr/lib/connman/scripts/dhclient-script [ 4.239045] type=1505 audit(1255042714.997:6): operation="profile_load" pid=527 name=/usr/bin/evince [ 4.243041] type=1505 audit(1255042715.007:7): operation="profile_load" pid=527 name=/usr/bin/evince-previewer [ 4.245404] type=1505 audit(1255042715.007:8): operation="profile_load" pid=527 name=/usr/bin/evince-thumbnailer [ 4.268969] type=1505 audit(1255042715.027:9): operation="profile_load" pid=529 name=/usr/lib/cups/backend/cups-pdf [ 4.269307] type=1505 audit(1255042715.027:10): operation="profile_load" pid=529 name=/usr/sbin/cupsd [ 5.372684] udev: starting version 147 [ 5.996476] Linux video capture interface: v2.00 [ 6.027417] pwc: Philips webcam module version 10.0.13 loaded. [ 6.027421] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. [ 6.027423] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, [ 6.027426] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. [ 6.027447] pwc: Sotec Afina Eye USB webcam detected. [ 6.054117] pwc: Registered as /dev/video0. [ 6.060095] input: PWC snapshot button as /devices/pci0000:00/0000:00:02.0/usb2/2-5/input/input5 [ 6.060168] usbcore: registered new interface driver Philips webcam [ 6.162785] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 6.162812] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 6.635635] parport_pc 00:09: reported by Plug and Play ACPI [ 6.635682] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.293038] nvidia: module license 'NVIDIA' taints kernel. [ 7.293043] Disabling lock debugging due to kernel taint [ 7.556070] nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 7.556079] nvidia 0000:05:00.0: setting latency timer to 64 [ 7.556317] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 7.800415] eth0: link down [ 7.800803] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.807649] EDAC MC: Ver: 2.1.0 Oct 7 2009 [ 7.809300] ppdev: user-space parallel port driver [ 7.811811] lp0: using parport0 (interrupt-driven). [ 7.862626] cfg80211: Calling CRDA to update world regulatory domain [ 8.405543] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.531211] EDAC amd64_edac: Ver: 3.2.0 Oct 7 2009 [ 8.532015] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 8.532022] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 8.532025] EDAC amd64: bit 0x0000000000000010 in MSR 0x0000017b of node 0 should be enabled [ 8.532028] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 8.532029] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 8.532031] Might be a BIOS bug, if BIOS says ECC is enabled [ 8.532032] Use of the override can cause unknown side effects. [ 8.532053] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 9.293132] cfg80211: World regulatory domain updated: [ 9.293136] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.293139] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.293142] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.293145] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.293147] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.293149] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.532008] rt2500pci 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 10.532015] rt2500pci 0000:01:09.0: setting latency timer to 64 [ 10.738070] Adding 4305380k swap on /dev/sda6. Priority:-1 extents:1 across:4305380k [ 10.800522] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23 [ 10.800529] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 23 (level, low) -> IRQ 23 [ 10.800572] Intel ICH 0000:00:04.0: setting latency timer to 64 [ 10.865901] phy0: Selected rate control algorithm 'minstrel' [ 10.866721] Registered led device: rt2500pci-phy0::radio [ 10.866740] Registered led device: rt2500pci-phy0::quality [ 10.998445] usbcore: registered new interface driver snd-usb-audio [ 11.150021] intel8x0_measure_ac97_clock: measured 60689 usecs (2976 samples) [ 11.150024] intel8x0: clocking to 46985 [ 12.799736] EXT3 FS on sdc8, internal journal [ 13.207908] kjournald starting. Commit interval 5 seconds [ 13.207921] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 13.208397] EXT3 FS on sdj1, internal journal [ 13.208402] EXT3-fs: mounted filesystem with writeback data mode. [ 13.225779] kjournald starting. Commit interval 5 seconds [ 13.225790] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 13.226040] EXT3 FS on sdb1, internal journal [ 13.226044] EXT3-fs: mounted filesystem with writeback data mode. [ 13.227955] kjournald starting. Commit interval 5 seconds [ 13.249695] kjournald starting. Commit interval 5 seconds [ 13.249705] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 13.249792] EXT3 FS on sda1, internal journal [ 13.249797] EXT3-fs: mounted filesystem with writeback data mode. [ 13.250269] EXT3 FS on sda5, internal journal [ 13.250273] EXT3-fs: mounted filesystem with writeback data mode. [ 13.526508] kjournald starting. Commit interval 5 seconds [ 13.526706] EXT3 FS on sdc6, internal journal [ 13.526712] EXT3-fs: mounted filesystem with writeback data mode. [ 13.732983] kjournald starting. Commit interval 5 seconds [ 13.733172] EXT3 FS on sdc7, internal journal [ 13.733177] EXT3-fs: mounted filesystem with writeback data mode. [ 18.172515] eth1: no IPv6 routers present [ 19.593724] __ratelimit: 18 callbacks suppressed [ 19.593728] type=1505 audit(1255035524.843:17): operation="profile_replace" pid=1591 name=/usr/share/gdm/guest-session/Xsession [ 19.595802] type=1505 audit(1255035524.843:18): operation="profile_replace" pid=1592 name=/sbin/dhclient3 [ 19.596080] type=1505 audit(1255035524.843:19): operation="profile_replace" pid=1592 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 19.596241] type=1505 audit(1255035524.843:20): operation="profile_replace" pid=1592 name=/usr/lib/connman/scripts/dhclient-script [ 19.601051] type=1505 audit(1255035524.843:21): operation="profile_replace" pid=1593 name=/usr/bin/evince [ 19.605076] type=1505 audit(1255035524.853:22): operation="profile_replace" pid=1593 name=/usr/bin/evince-previewer [ 19.607452] type=1505 audit(1255035524.853:23): operation="profile_replace" pid=1593 name=/usr/bin/evince-thumbnailer [ 19.613469] type=1505 audit(1255035524.863:24): operation="profile_replace" pid=1595 name=/usr/lib/cups/backend/cups-pdf [ 19.613810] type=1505 audit(1255035524.863:25): operation="profile_replace" pid=1595 name=/usr/sbin/cupsd [ 19.616264] type=1505 audit(1255035524.863:26): operation="profile_replace" pid=1596 name=/usr/sbin/dhcpd3 [ 23.933068] dahdi: Telephony Interface Registered on major 196 [ 23.933072] dahdi: Version: [ 24.052813] dahdi_dummy: Trying to load High Resolution Timer [ 24.052816] dahdi_dummy: Initialized High Resolution Timer [ 24.052818] dahdi_dummy: Starting High Resolution Timer [ 24.052824] dahdi_dummy: High Resolution Timer started, good to go [ 24.194350] dahdi_transcode: Loaded. [ 25.476106] dahdi: Registered tone zone 0 (United States / North America) [ 27.068882] __ratelimit: 15 callbacks suppressed [ 27.068886] type=1503 audit(1255035532.311:32): operation="open" pid=1848 parent=1847 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 27.533508] type=1503 audit(1255035532.781:33): operation="open" pid=1871 parent=1870 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 28.029981] type=1503 audit(1255035533.271:34): operation="open" pid=1986 parent=1878 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 28.631672] type=1503 audit(1255035533.873:35): operation="open" pid=1992 parent=1991 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 29.653674] type=1503 audit(1255035534.903:36): operation="open" pid=2029 parent=2028 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 31.129742] type=1503 audit(1255035536.373:37): operation="open" pid=2071 parent=2070 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 31.322312] type=1503 audit(1255035536.563:38): operation="open" pid=2084 parent=2083 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 56.241135] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 124.432546] Clocksource tsc unstable (delta = -131790409 ns) [12036.439770] mabackup[7135]: segfault at 0 ip 0000000000416353 sp 00007fffcfc94720 error 4 in mabackup[400000+ba000] [81152.500781] usb 1-6: new high speed USB device using ehci_hcd and address 4 [81152.660079] usb 1-6: configuration #1 chosen from 1 choice [81153.044440] usbcore: registered new interface driver cdc_ether [81153.355016] rndis_host 1-6:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47 [81153.376886] eth2: register 'rndis_host' at usb-0000:00:02.1-6, RNDIS device, 80:00:60:0f:e8:00 [81153.376936] usbcore: registered new interface driver rndis_host [81153.389991] usbcore: registered new interface driver rndis_wlan [81182.096259] mabackup[15753]: segfault at 0 ip 0000000000416353 sp 00007fffb6eba990 error 4 in mabackup[400000+ba000] [83213.292157] usb 1-6: USB disconnect, address 4 [83213.292258] eth2: unregister 'rndis_host' usb-0000:00:02.1-6, RNDIS device [90012.612541] usb 1-6: new high speed USB device using ehci_hcd and address 5 [90012.772346] usb 1-6: configuration #1 chosen from 1 choice [90012.953658] rndis_host 1-6:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47 [90012.976545] eth2: register 'rndis_host' at usb-0000:00:02.1-6, RNDIS device, 80:00:60:0f:e8:00 [90013.077095] udev: renamed network interface eth2 to eth3 [90022.065719] usb 1-6: USB disconnect, address 5 [90022.065858] eth3: unregister 'rndis_host' usb-0000:00:02.1-6, RNDIS device [90025.392538] usb 1-6: new high speed USB device using ehci_hcd and address 6 [90025.553483] usb 1-6: configuration #1 chosen from 1 choice [90026.116313] Initializing USB Mass Storage driver... [90026.117658] scsi8 : SCSI emulation for USB Mass Storage devices [90026.117880] usb-storage: device found at 6 [90026.117887] usb-storage: waiting for device to settle before scanning [90026.117901] usbcore: registered new interface driver usb-storage [90026.117908] USB Mass Storage support registered. [90031.111334] usb-storage: device scan complete [90031.114371] scsi scan: INQUIRY result too short (5), using 36 [90031.114384] scsi 8:0:0:0: Direct-Access PQ: 0 ANSI: 0 [90031.115315] sd 8:0:0:0: Attached scsi generic sg13 type 0 [90031.128141] sd 8:0:0:0: [sdm] 15757312 512-byte logical blocks: (8.06 GB/7.51 GiB) [90031.130830] sd 8:0:0:0: [sdm] Write Protect is off [90031.130842] sd 8:0:0:0: [sdm] Mode Sense: 00 06 00 00 [90031.130852] sd 8:0:0:0: [sdm] Assuming drive cache: write through [90031.141478] sd 8:0:0:0: [sdm] Assuming drive cache: write through [90031.141490] sdm: sdm1 [90031.157728] sd 8:0:0:0: [sdm] Assuming drive cache: write through [90031.157739] sd 8:0:0:0: [sdm] Attached SCSI removable disk [90133.526408] type=1503 audit(1255125638.773:39): operation="open" pid=17178 parent=17177 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/FC30-3DA9/Inbox.mst29975450.1087116800/Mail-Anlagen/35000721-300006d6.att" [90133.528251] type=1503 audit(1255125638.773:40): operation="open" pid=17178 parent=17177 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/FC30-3DA9/Inbox.mst29975450.1087116800/Mail-Anlagen/35000721-300006d6.att" [90133.644001] type=1503 audit(1255125638.893:41): operation="open" pid=17180 parent=17177 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/FC30-3DA9/Inbox.mst29975450.1087116800/Mail-Anlagen/3d000654-37000653.att" [90133.645792] type=1503 audit(1255125638.893:42): operation="open" pid=17180 parent=17177 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/FC30-3DA9/Inbox.mst29975450.1087116800/Mail-Anlagen/3d000654-37000653.att" [90133.703220] type=1503 audit(1255125638.953:43): operation="open" pid=17181 parent=17177 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/FC30-3DA9/Inbox.mst29975450.1087116800/Mail-Anlagen/30000e87-32000eb3.att" [90133.704749] type=1503 audit(1255125638.953:44): operation="open" pid=17181 parent=17177 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/FC30-3DA9/Inbox.mst29975450.1087116800/Mail-Anlagen/30000e87-32000eb3.att" [90133.750646] type=1503 audit(1255125638.993:45): operation="open" pid=17182 parent=17177 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/FC30-3DA9/Inbox.mst29975450.1087116800/Mail-Anlagen/39000a4b-31000b51.att" [90133.752154] type=1503 audit(1255125638.993:46): operation="open" pid=17182 parent=17177 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/FC30-3DA9/Inbox.mst29975450.1087116800/Mail-Anlagen/39000a4b-31000b51.att" [90133.834427] type=1503 audit(1255125639.083:47): operation="open" pid=17183 parent=17177 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/FC30-3DA9/Inbox.mst29975450.1087116800/Mail-Anlagen/37000b0b-380009d3.att" [90133.835953] type=1503 audit(1255125639.083:48): operation="open" pid=17183 parent=17177 profile="/usr/bin/evince-thumbnailer" requested_mask="r::" denied_mask="r::" fsuid=1000 ouid=1000 name="/media/FC30-3DA9/Inbox.mst29975450.1087116800/Mail-Anlagen/37000b0b-380009d3.att" [92819.405869] __ratelimit: 66 callbacks suppressed [92819.405880] npviewer.bin[18224]: segfault at ff99cd48 ip 00000000ff99cd48 sp 00000000ff847dec error 14 [92914.085142] npviewer.bin[18312]: segfault at ff99cd48 ip 00000000ff99cd48 sp 00000000ffd82cec error 14 [98435.837130] mabackup[19406]: segfault at 0 ip 0000000000416353 sp 00007fff9e634690 error 4 in mabackup[400000+ba000] [131972.242447] usb 1-6: USB disconnect, address 6 [184836.801751] mabackup[25656]: segfault at 0 ip 0000000000416353 sp 00007fff4a2ecb90 error 4 in mabackup[400000+ba000] [234589.896657] mabackup[16549]: segfault at 0 ip 0000000000416353 sp 00007fff7a8f0860 error 4 in mabackup[400000+ba000] [236670.613586] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [236670.613595] ata5.01: BMDMA stat 0x64 [236670.613612] ata5.01: cmd c8/00:28:3f:00:00/00:00:00:00:00/f0 tag 0 dma 20480 in [236670.613615] res 51/84:00:66:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) [236670.613622] ata5.01: status: { DRDY ERR } [236670.613627] ata5.01: error: { ICRC ABRT } [236670.613638] pata_cmd64x: active 10 recovery 10 setup 3. [236670.613645] pata_cmd64x: active 10 recovery 10 setup 3. [236670.613660] ata5: soft resetting link [236670.832944] pata_cmd64x: active 3 recovery 1 setup 1. [236670.832956] pata_cmd64x: active 3 recovery 1 setup 1. [236670.872895] ata5.00: configured for UDMA/100 [236670.933022] ata5.01: configured for UDMA/100 [236670.933042] ata5: EH complete [236670.955307] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [236670.955316] ata5.01: BMDMA stat 0x64 [236670.955332] ata5.01: cmd c8/00:28:3f:00:00/00:00:00:00:00/f0 tag 0 dma 20480 in [236670.955335] res 51/84:00:66:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) [236670.955342] ata5.01: status: { DRDY ERR } [236670.955347] ata5.01: error: { ICRC ABRT } [236670.955358] pata_cmd64x: active 10 recovery 10 setup 3. [236670.955366] pata_cmd64x: active 10 recovery 10 setup 3. [236670.955381] ata5: soft resetting link [236671.172939] pata_cmd64x: active 3 recovery 1 setup 1. [236671.172951] pata_cmd64x: active 3 recovery 1 setup 1. [236671.212895] ata5.00: configured for UDMA/100 [236671.273032] ata5.01: configured for UDMA/100 [236671.273053] ata5: EH complete [236925.561609] kjournald starting. Commit interval 5 seconds [236925.561831] EXT3 FS on sdc7, internal journal [236925.561842] EXT3-fs: mounted filesystem with writeback data mode. [236925.912568] kjournald starting. Commit interval 5 seconds [236925.913366] EXT3-fs warning: checktime reached, running e2fsck is recommended [236925.933435] EXT3 FS on sdj1, internal journal [236925.933452] EXT3-fs: mounted filesystem with writeback data mode. [236927.932198] kjournald starting. Commit interval 5 seconds [236927.932232] EXT3-fs warning: checktime reached, running e2fsck is recommended [236927.932660] EXT3 FS on sdb1, internal journal [236927.932671] EXT3-fs: mounted filesystem with writeback data mode. [236929.910124] kjournald starting. Commit interval 5 seconds [236929.910137] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [236929.910314] EXT3 FS on sda5, internal journal [236929.910321] EXT3-fs: mounted filesystem with writeback data mode. [237234.516190] type=1505 audit(1255272739.763:71): operation="profile_replace" pid=20895 name=/usr/share/gdm/guest-session/Xsession [237234.729278] type=1505 audit(1255272739.971:72): operation="profile_replace" pid=20896 name=/sbin/dhclient3 [237234.729478] type=1505 audit(1255272739.971:73): operation="profile_replace" pid=20896 name=/usr/lib/NetworkManager/nm-dhcp-client.action [237234.729565] type=1505 audit(1255272739.971:74): operation="profile_replace" pid=20896 name=/usr/lib/connman/scripts/dhclient-script [237241.938621] type=1505 audit(1255272747.183:75): operation="profile_replace" pid=20898 name=/usr/bin/evince [237241.940624] type=1505 audit(1255272747.183:76): operation="profile_replace" pid=20898 name=/usr/bin/evince-previewer [237241.942038] type=1505 audit(1255272747.183:77): operation="profile_replace" pid=20898 name=/usr/bin/evince-thumbnailer [237242.263160] type=1505 audit(1255272747.513:78): operation="profile_replace" pid=20904 name=/usr/lib/cups/backend/cups-pdf [237242.263455] type=1505 audit(1255272747.513:79): operation="profile_replace" pid=20904 name=/usr/sbin/cupsd [237242.355965] type=1505 audit(1255272747.603:80): operation="profile_replace" pid=20905 name=/usr/sbin/dhcpd3 [237242.448814] type=1505 audit(1255272747.693:81): operation="profile_replace" pid=20906 name=/usr/sbin/mysqld [237242.527450] type=1505 audit(1255272747.773:82): operation="profile_replace" pid=20907 name=/usr/sbin/mysqld-akonadi [237242.602151] type=1505 audit(1255272747.843:83): operation="profile_replace" pid=20908 name=/usr/sbin/named [237242.685754] type=1505 audit(1255272747.933:84): operation="profile_replace" pid=20909 name=/usr/sbin/slapd [237250.454128] __ratelimit: 15 callbacks suppressed [237250.454132] type=1505 audit(1255272755.701:90): operation="profile_replace" pid=20970 name=/usr/bin/evince [237250.455961] type=1505 audit(1255272755.701:91): operation="profile_replace" pid=20970 name=/usr/bin/evince-previewer [237250.457314] type=1505 audit(1255272755.701:92): operation="profile_replace" pid=20970 name=/usr/bin/evince-thumbnailer [237250.745399] type=1505 audit(1255272755.993:93): operation="profile_replace" pid=20975 name=/usr/lib/cups/backend/cups-pdf [237250.745686] type=1505 audit(1255272755.993:94): operation="profile_replace" pid=20975 name=/usr/sbin/cupsd [237250.816081] type=1505 audit(1255272756.063:95): operation="profile_replace" pid=20976 name=/usr/sbin/dhcpd3 [237250.902866] type=1505 audit(1255272756.153:96): operation="profile_replace" pid=20977 name=/usr/sbin/mysqld [237250.977472] type=1505 audit(1255272756.223:97): operation="profile_replace" pid=20978 name=/usr/sbin/named [237251.052215] type=1505 audit(1255272756.293:98): operation="profile_replace" pid=20979 name=/usr/sbin/slapd [237251.139796] type=1505 audit(1255272756.383:99): operation="profile_replace" pid=20980 name=/usr/sbin/tcpdump [237310.165061] kjournald starting. Commit interval 5 seconds [237310.165233] EXT3 FS on sdc7, internal journal [237310.165244] EXT3-fs: mounted filesystem with writeback data mode. [237310.458743] kjournald starting. Commit interval 5 seconds [237310.458759] EXT3-fs warning: checktime reached, running e2fsck is recommended [237310.459179] EXT3 FS on sdj1, internal journal [237310.459189] EXT3-fs: mounted filesystem with writeback data mode. [237311.605985] kjournald starting. Commit interval 5 seconds [237311.605996] EXT3-fs warning: checktime reached, running e2fsck is recommended [237311.606236] EXT3 FS on sdb1, internal journal [237311.606242] EXT3-fs: mounted filesystem with writeback data mode. [237312.998087] kjournald starting. Commit interval 5 seconds [237312.998104] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [237313.003024] EXT3 FS on sda5, internal journal [237313.003036] EXT3-fs: mounted filesystem with writeback data mode. [238127.842436] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [238127.842441] ata5.01: BMDMA stat 0x64 [238127.842449] ata5.01: cmd 25/00:08:bf:ab:be/00:00:15:00:00/f0 tag 0 dma 4096 in [238127.842450] res 51/84:00:c6:ab:be/84:00:15:00:00/f5 Emask 0x10 (ATA bus error) [238127.842453] ata5.01: status: { DRDY ERR } [238127.842455] ata5.01: error: { ICRC ABRT } [238127.842461] pata_cmd64x: active 10 recovery 10 setup 3. [238127.842468] pata_cmd64x: active 10 recovery 10 setup 3. [238127.842486] ata5: soft resetting link [238128.061501] pata_cmd64x: active 3 recovery 1 setup 1. [238128.061509] pata_cmd64x: active 3 recovery 1 setup 1. [238128.080774] ata5.00: configured for UDMA/100 [238128.141636] ata5.01: configured for UDMA/100 [238128.141651] ata5: EH complete [238128.151009] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [238128.151013] ata5.01: BMDMA stat 0x64 [238128.151020] ata5.01: cmd 25/00:08:bf:ab:be/00:00:15:00:00/f0 tag 0 dma 4096 in [238128.151021] res 51/84:00:c6:ab:be/84:00:15:00:00/f5 Emask 0x10 (ATA bus error) [238128.151024] ata5.01: status: { DRDY ERR } [238128.151026] ata5.01: error: { ICRC ABRT } [238128.151032] pata_cmd64x: active 10 recovery 10 setup 3. [238128.151039] pata_cmd64x: active 10 recovery 10 setup 3. [238128.151057] ata5: soft resetting link [238128.371924] pata_cmd64x: active 3 recovery 1 setup 1. [238128.371934] pata_cmd64x: active 3 recovery 1 setup 1. [238128.391491] ata5.00: configured for UDMA/100 [238128.452107] ata5.01: configured for UDMA/100 [238128.452122] ata5: EH complete [238128.459639] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [238128.459644] ata5.01: BMDMA stat 0x64 [238128.459652] ata5.01: cmd 25/00:08:bf:ab:be/00:00:15:00:00/f0 tag 0 dma 4096 in [238128.459653] res 51/84:00:c6:ab:be/84:00:15:00:00/f5 Emask 0x10 (ATA bus error) [238128.459657] ata5.01: status: { DRDY ERR } [238128.459659] ata5.01: error: { ICRC ABRT } [238128.459664] pata_cmd64x: active 10 recovery 10 setup 3. [238128.459671] pata_cmd64x: active 10 recovery 10 setup 3. [238128.459689] ata5: soft resetting link [238128.671495] pata_cmd64x: active 3 recovery 1 setup 1. [238128.671505] pata_cmd64x: active 3 recovery 1 setup 1. [238128.691957] ata5.00: configured for UDMA/100 [238128.751810] ata5.01: configured for UDMA/100 [238128.751829] ata5: EH complete [238128.759871] ata5.01: limiting speed to UDMA/66:PIO4 [238128.759877] ata5.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [238128.759880] ata5.01: BMDMA stat 0x64 [238128.759888] ata5.01: cmd 25/00:08:bf:ab:be/00:00:15:00:00/f0 tag 0 dma 4096 in [238128.759889] res 51/84:00:c6:ab:be/84:00:15:00:00/f5 Emask 0x10 (ATA bus error) [238128.759893] ata5.01: status: { DRDY ERR } [238128.759895] ata5.01: error: { ICRC ABRT } [238128.759900] pata_cmd64x: active 10 recovery 10 setup 3. [238128.759907] pata_cmd64x: active 10 recovery 10 setup 3. [238128.759925] ata5: soft resetting link [238128.981432] pata_cmd64x: active 3 recovery 1 setup 1. [238128.981441] pata_cmd64x: active 3 recovery 1 setup 1. [238129.001537] ata5.00: configured for UDMA/100 [238129.060838] ata5.01: configured for UDMA/66 [238129.060853] ata5: EH complete [245750.550261] __ratelimit: 3 callbacks suppressed [245750.550267] npviewer.bin[24986]: segfault at ff99cd48 ip 00000000ff99cd48 sp 00000000ff96908c error 14 [247391.950031] usb 2-6: new full speed USB device using ohci_hcd and address 4 [247392.213673] usb 2-6: configuration #1 chosen from 1 choice [251037.262881] usb 2-6: USB disconnect, address 4 [253279.535511] UDF-fs: No VRS found [253279.535516] UDF-fs: No partition found (1) [253279.544205] ISO 9660 Extensions: Microsoft Joliet Level 3 [253279.544222] ISOFS: changing to secondary root [262133.630857] usb 2-6: new full speed USB device using ohci_hcd and address 5 [262133.810863] usb 2-6: device descriptor read/64, error -62 [262134.102552] usb 2-6: device descriptor read/64, error -62 [262134.390853] usb 2-6: new full speed USB device using ohci_hcd and address 6 [262134.570856] usb 2-6: device descriptor read/64, error -62 [262134.860578] usb 2-6: device descriptor read/64, error -62 [262135.152545] usb 2-6: new full speed USB device using ohci_hcd and address 7 [262135.572527] usb 2-6: device not accepting address 7, error -62 [262135.750852] usb 2-6: new full speed USB device using ohci_hcd and address 8 [262136.172526] usb 2-6: device not accepting address 8, error -62 [262136.172554] hub 2-0:1.0: unable to enumerate USB device on port 6 [262353.370043] usb 2-6: new full speed USB device using ohci_hcd and address 9 [262353.593754] usb 2-6: configuration #1 chosen from 1 choice [263977.186936] usb 2-6: USB disconnect, address 9 [271236.395572] mabackup[7720]: segfault at 0 ip 0000000000416353 sp 00007ffffc72c450 error 4 in mabackup[400000+ba000] [357636.386168] mabackup[20235]: segfault at 0 ip 0000000000416353 sp 00007fff980dc490 error 4 in mabackup[400000+ba000] [360876.735541] mabackup[21895]: segfault at 0 ip 0000000000416353 sp 00007fffe0cd5da0 error 4 in mabackup[400000+ba000] [444036.055130] mabackup[527]: segfault at 0 ip 0000000000416353 sp 00007fff4676fbb0 error 4 in mabackup[400000+ba000] [447276.012783] mabackup[2292]: segfault at 0 ip 0000000000416353 sp 00007fffce0da9f0 error 4 in mabackup[400000+ba000] [530436.247453] mabackup[12620]: segfault at 0 ip 0000000000416353 sp 00007fff1cabac90 error 4 in mabackup[400000+ba000] [612378.654098] mabackup[22719]: segfault at 0 ip 0000000000416353 sp 00007fff3669cb50 error 4 in mabackup[400000+ba000] [616836.127830] mabackup[25121]: segfault at 0 ip 0000000000416353 sp 00007fff94262a20 error 4 in mabackup[400000+ba000] [703236.366529] mabackup[4260]: segfault at 0 ip 0000000000416353 sp 00007ffff4289450 error 4 in mabackup[400000+ba000] [732129.661221] mabackup[8115]: segfault at 0 ip 0000000000416353 sp 00007fff8ff3dea0 error 4 in mabackup[400000+ba000] [733717.654745] seahorse-daemon[23211]: segfault at 0 ip (null) sp 00007fff934e27f8 error 14 in seahorse-daemon[400000+93000]